Cleaning Medical Electronics
|
|
- Barnard Kennedy
- 5 years ago
- Views:
Transcription
1 Cleaning Medical Electronics MIKE BIXENMAN KYZEN CORPORATION MARK NORTHRUP DYNAMIC RESEARCH TESTING LAB DALE LEE PLEXUS CORPORATION 9/18/ , Kyzen Corp. 1
2 Discussion Points 1. Introduction 2. Design for Cleaning 3. Test Vehicles 1. Solder Mask Definition 2. Voltage Effects 3. Frequency Effects 4. Conclusions 9/18/ , Kyzen Corp. 2
3 Medical Electronics The challenge for Medical OEMs is to Design reliable electronic hardware Performs reliably for the patient Implantable devices require Increased functionality Small form factor Fast data transfer 9/18/ , Kyzen Corp. 3
4 Patient Information on Demand Trends lead to Electronic component complexity Require faster signal rates Higher transmission frequencies The concern is that Hardware failures will become more prevalent 9/18/ , Kyzen Corp. 4
5 Reliability Reliability concerns challenge OEMs to Look outside the existing design rules Toward application specific field simulations Better understanding of reliability risks 9/18/ , Kyzen Corp. 5
6 Circuit Board Design Plays a role when cleaning is required Component size / standoff height Solder mask definition Solder paste selection Package placement / density Thermal heat to solder components Static solvating rate Dynamic energy rate 9/18/ , Kyzen Corp. 6
7 Test Vehicles 1. Designed to test removal of soils Z-Axis gap height Density Placement 2. Designed to test electrical effects Voltage effects Frequency effects 9/18/ , Kyzen Corp. 7
8 Clean Test Board 9/18/ , Kyzen Corp. 8
9 Solder Mask Options 9/18/ , Kyzen Corp. 9
10 Miniaturization Continues chip cap 0.4mm x 0.2mm Murata introduces new chip capacitor 0.25mm x 0.125mm 9/18/ , Kyzen Corp. 10
11 Smaller Components Tighter standoff heights Capillary forces pull flux under component 9/18/ , Kyzen Corp. 11
12 Solder Mask Defined Solder mask defined pads Solder mask between pads 9/18/ , Kyzen Corp. 12
13 Non Solder Mask Defined Solder mask removed adjacent pads Solder mask between pads 9/18/ , Kyzen Corp. 13
14 No Solder Mask Solder mask removed adjacent pads No Solder mask between pads 9/18/ , Kyzen Corp. 14
15 SMD 0201 Chip Caps Before Cleaning 9/18/ , Kyzen Corp. 15
16 NSMD 0201 Chip Caps Before Cleaning 9/18/ , Kyzen Corp. 16
17 No Solder Mask 0201 Chip Caps Before Cleaning 9/18/ , Kyzen Corp. 17
18 SMD 0402 Chip Caps Before Cleaning 9/18/ , Kyzen Corp. 18
19 NSMD 0402 Chip Caps Before Cleaning 9/18/ , Kyzen Corp. 19
20 No Solder Mask 0402 Chip Caps Before Cleaning 9/18/ , Kyzen Corp. 20
21 SMD 0805 Chip Caps Before Cleaning 9/18/ , Kyzen Corp. 21
22 NSMD 0805 Chip Caps Before Cleaning 9/18/ , Kyzen Corp. 22
23 No Solder Mask 0805 Chip Caps Before Cleaning 9/18/ , Kyzen Corp. 23
24 SMD 1210 Chip Caps Before Cleaning 9/18/ , Kyzen Corp. 24
25 NSMD 1210 Chip Caps Before Cleaning 9/18/ , Kyzen Corp. 25
26 No Solder Mask 1210 Chip Caps Before Cleaning 9/18/ , Kyzen Corp. 26
27 SMD (QFN/MLF) Before Cleaning 9/18/ , Kyzen Corp. 27
28 NSMD (QFN / MLF) Before Cleaning 9/18/ , Kyzen Corp. 28
29 No Solder Mask (QFN / MLF) Before Cleaning 9/18/ , Kyzen Corp. 29
30 Solder Mask Defined PBGA Before Cleaning Wide Pitch Narrow Pitch 9/18/ , Kyzen Corp. 30
31 Non Solder Mask Defined PBGA Before Cleaning Wide Pitch Narrow Pitch 9/18/ , Kyzen Corp. 31
32 No Solder Mask (PGBA) Before Cleaning Wide Pitch Narrow Pitch 9/18/ , Kyzen Corp. 32
33 Data Findings 9/18/ , Kyzen Corp. 33
34 Chip Caps Main Effects Plot for % Residue under Chip Caps Component Data Means Component Wash Time (min.) Mean Solder Mask Definition NoSM NSMD SMD 9/18/ , Kyzen Corp. 34
35 Ball Grid Arrays Main Effects Plot for % Residue under BGA Components Data Means Component Wash Time (min.) Mean 0.0 BGA360 PBGA324 PBGA676 Solder Mask Definition NoSM NSMD SMD 9/18/ , Kyzen Corp. 35
36 MLF / QFN Main Effects Plot for % Residue under QFN Component Data Means Component Wash Time (min.) Mean 50 MLF88 Solder Mask Definition NoSM NSMD SMD 9/18/ , Kyzen Corp. 36
37 All Component Types Main Effects Plot for % Residue under Component Data Means 80 Component Wash Time (min.) Mean BGA360 MLF88 PBGA324 PBGA Solder Mask Definition NoSM NSMD SMD 9/18/ , Kyzen Corp. 37
38 Voltage Effects 9/18/ , Kyzen Corp. 38
39 Circuit Designs SMT QFN BGA 9/18/ , Kyzen Corp. 39
40 Test Patterns Donut Cross X 9/18/ , Kyzen Corp. 40
41 Electrical Field Miniaturization Lower contamination levels Less metal is dissolved With less metal ions levels Electrical field drives metallic ion forces The electric field will be higher As distance between conductors reduce Minzari et al., , 9/18/2012 Kyzen Corp.
42 Constant Voltage Rises inversely with conductor spacing Traces as small as 48µm (1.98 mils) At 5V ~ electric field = 2.5V At 0.4V/mil to 1.6 V/mil the occurrence of dendrites increased Bumiler & Hillman (2010) , 9/18/2012 Kyzen Corp.
43 Halogen Ions 25 mil comb spacing Withstand higher levels of contamination >20 µg/in mil comb spacing Levels at 5-20 µg/in 2 problematic 6 mil comb spacing Levels of 0-2 µg/in 2 problematic Bumiler & Hillman (2010) 9/18/ , Kyzen Corp. 43
44 Electrical Field High Voltage Data 9/18/ , Kyzen Corp. 44
45 Frequency 9/18/ , Kyzen Corp. 45
46 Controlled Loss Testing Controlled loss testing involves Dissipation factor (Df) of the PCB material Copper surface roughness Uniformity of the PCB conductor etched features Conductor length and impedance mismatches PCB surface finish, solder mask etc. 9/18/ , Kyzen Corp. 46
47 Insertion Loss The PCB alone involves four components of insertion loss which include Dielectric Conductor Leakage and Radiation 9/18/ , Kyzen Corp. 47
48 Current Cleanliness Testing Protocol IPC TM 650 Method Ion Chromatography 75% IPA / 25% DI water 60 minute extraction period Ineffective for High Frequency Foresite C3 Localized extraction Steam extraction using DI water 3 minute extraction period Limited application Progression of Methods IPC (Global) Foresite C3 (Isolated)? New Method (Tighter isolation) 9/18/ , Kyzen Corp. 48
49 Research in Progress Correlate chemical with electrical effects Correlate Ionics on a test board to failure with different frequency levels 1 GHz 10 GHz 20 GHz 40 GHz Set limits that an engineer can use to predict failure and control a process 9/18/ , Kyzen Corp. 49
50 Test Vehicle Test from 1, 10, 20, 40 Giga Hertz Measure interactions What do we measure Parasitic Capacitance Controlled Impedance Controlled Inductance Frequency Shift Gain or Loss Phase Shift or Change Scattering(S) Parameters 9/18/ , Kyzen Corp. 50
51 Proposed Test Vehicle Structures 9/18/ , Kyzen Corp. 51
52 Loss Data Example 9/18/ , Kyzen Corp. 52
53 Concluding Remarks 9/18/ , Kyzen Corp. 53
54 Circuit Board Design Capillary flux action underfills tight gaps Chip caps and QFN devices Removal of solder mask reduces Flux residue under component Increases gap height Easier to clean BGA components Solder mask defined pads were easier to clean NSMD were slightly more difficult to clean over SMD No Solder Mask increased cleaning difficulty 9/18/ , Kyzen Corp. 54
55 Voltage Tighter pitch devices Increases electrical field Less contamination more problematic Lower levels of contamination critical factor 9/18/ , Kyzen Corp. 55
56 Frequency High Frequency More problematic to failure New test method needed to Quantify ionic contamination with electrical Guideline for engineers to know limits for specific voltage, frequency and currents 9/18/ , Kyzen Corp. 56
57 Thank You
58 Authors Mike Bixenman Chief Technology Office Kyzen Corporation Mark Northrup Director of Advanced Technical Operations Dynamic Research Testing Labs (IEC Electronics) Dale Lee Staff DFX Project Engineer Plexus Corporation 9/18/ , Kyzen Corp. 58
QFN DESIGN CONSIDERATIONS TO IMPROVE CLEANING A FOLLOW ON STUDY
QFN DESIGN CONSIDERATIONS TO IMPROVE CLEANING A FOLLOW ON STUDY Mike Bixenman, D.B.A. Kyzen Corporation Nashville, TN Dale Lee Plexus Corporation Neenah, WI Bill Vuono TriQuint Semiconductor Richardson,
More informationRespiration. Figure 22: Schematic representation of the respiratory system
Respiration One of the seven characteristics of something which is living is respiration. Strictly speaking, respiration is the process that takes place at cellular level and is one of three different
More informationHigh Density FPGA Package BIST Technique
High Density FPGA Package BIST Technique Douglas Goodman, James Hofmeister, Justin Judkins, PhD Ridgetop Group Inc. 3580 West Ina Road Tucson, AZ 85741 (520) 742-3300 Doug@ridgetop-group.com Abstract Over
More informationD-PAK Voiding: A Study to Determine the Origins of D-PAK Voiding
As originally published in the SMTA Proceedings D-PAK Voiding: A Study to Determine the Origins of D-PAK Voiding Kim Flanagan and Greg Wade Indium Corporation Clinton, NY Abstract Voiding in bottom termination
More information(TRCM) Wire Wound RF SMD Inductor
Version: February 17, 2017 (TRCM) Wire Wound RF SMD Inductor Token Electronics Industry Co., Ltd. Web: www.token.com.tw Email: rfq@token.com.tw Taiwan: No.137, Sec. 1, Zhongxing Rd., Wugu District, New
More informationVoiding Control for QFN Assembly
Voiding Control for QFN Assembly Authored by: Derrick Herron, Dr. Yan Liu, and Dr. Ning-Cheng Lee Abstract Quad Flat No Leads (QFN) package designs receive more and more attention in electronic industry
More informationImpact of Lead Free on Automated X-Ray Inspection
Chwee Liong Tee Hoon Chiow Koay Intel Corporation: Kulim, Malaysia The deadline for converting manufacturing lines to lead free processes is getting closer each day. However from a test perspective, are
More information1mm Pitch SMT Board-to-Board Connectors(Standard Interface Connector Compliant with VESA FPDI-1)
1mm Pitch SMT Board-to-Board Connectors(Standard Interface Connector Compliant with VESA FPDI-1) DF Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The and contact connectors
More informationPRODUCT SPECIFICATION
MINI-FIT SR. SERIES 1.0 SCOPE This specification covers the 10.00 mm / (.394 in.) centerline tin and gold plated connector series, single and dual row versions in wire to wire and wire to printed circuit
More informationMedium Power Film Capacitors
GENERAL DESCRIPTION Metallized polypropylene dielectric capacitor with controlled self-healing. Reinforced metallization developed for high impulse currents. APPLICATIONS IGBT protection IGBT clamping
More informationPSR-4000 HFX Series (UL Name: PSR-4000DE / CA-40HF)
PSR-4000 HFX Series (UL Name: PSR-4000DE / CA-40HF) LIQUID PHOTOIMAGEABLE SOLDER MASK Application by Screen Printing Dark Green Satin Available in DI version Halogen-Free RoHS Compliant Compatible with
More informationINDIUM CORPORATION TECHNICAL PAPER. Does Thermal Cycling Impact the Electrical Reliability of a No-Clean Solder Paste Flux Residue.
Does Thermal Cycling Impact the Electrical Reliability Authored by: Eric Bastow, Indium Corporation. Introduction No-clean solder pastes are widely used in a number of applications that are exposed to
More informationImpact of Process Control in Pb-Free to SnPb Reballing Techniques
Impact of Process Control in Pb-Free to SnPb Reballing Techniques Part 1: Control of Thermal Exposure Joelle Arnold DfR Solutions SMTA ISCR 2014 Reballing Process Controls Five reballers employing distinct
More informationImplementing High Temperature Coplanarity Requirements for Components and PWBs. Proposed 1
Implementing High Temperature Coplanarity Requirements for Components and PWBs Proposed 1 Current Status: Coplanarity and flatness requirements have been included in JEP95 and other industry documents
More informationThin-Film Technology. Accu-F / Accu-P Thin-Film RF/Microwave Capacitors.
Thin-Film Technology Accu-F / Accu-P Thin-Film RF/Microwave Capacitors 5 Accu-F / Accu-P Thin-Film Technology THE IDEAL CAPACITOR The non-ideal characteristics of a real capacitor can be ignored at low
More informationType 761M. Axial Lead Pressed/Oval Profile. Metallized Polypropylene Film Capacitors. Type 761M. Specifications
Axial Lead Pressed/Oval Profile Metallized Polypropylene Film Capacitors Specifications Capacitance Range: 0.012 to 65.0 µf Capacitance Tolerance: ±5% and ±10%, standard (tolerances as close as ±3% available)
More informationThunderClad 3. TU-933 Super Low Loss Material. Laminates & Prepregs Mass Lamination Service Insulated Metal Substrate Materials
ThunderClad 3 TU-933 Super Low Loss Material Laminates & Prepregs Mass Lamination Service Insulated Metal Substrate Materials TUC Product Roadmap 2 ULVP VLP HCF Ultra Low Void Prepreg Very Low Profile
More informationAnalysis of Pressure Rise During Internal Arc Faults in Switchgear
Analysis of Pressure Rise During Internal Arc Faults in Switchgear ASANUMA, Gaku ONCHI, Toshiyuki TOYAMA, Kentaro ABSTRACT Switchgear include devices that play an important role in operations such as electric
More informationTHIẾT KẾ VI MẠCH TƯƠNG TỰ CHƯƠNG 2: CMOS Technology
THIẾT KẾ VI MẠCH TƯƠNG TỰ CHƯƠNG 2: CMOS Technology Hoàng Trang-bộ môn Kỹ Thuật Điện Tử hoangtrang@hcmut.edu.vn 1 TP.Hồ Chí Minh 12/2011 1. Overview - IC technology - CMOS vs BJT Hoàng Trang-bộ môn Kỹ
More informationLeakage Current Testing Is it right for your application?
Leakage Current Testing Is it right for your application? Introduction The Leakage Current test (LCT for short) is most often specified to be performed as a type test in a design or engineering laboratory
More information1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1)
1mm Pitch SMT Board to Board Connector(Standard Interface Connector Compliant with VESA FPDI-1) DF Series Features 1. Compliant with the VESA FPDI-1 Standard Interface Connector The and contact connectors
More informationRF Chip Inductors. Wire-Wound , 0603, 0805, 1008, Pulse Electronics - leading supplier of magnetics for consumer applications
RF Chip Inductors Wire-Wound - 0402, 0603, 0805, 1008, 1206 Pulse Electronics - leading supplier of magnetics for consumer applications Table of Contents The 0402 to 1206 series range of Miniature Chip
More informationBoard Finish Solderability with Sn-Ag-Cu
Presented at IPC SMEMA Council APEX 2003 www.goapex.org Board Finish Solderability with Sn-Ag-Cu Chris Hunt and Ling Zou National Physical Laboratory Teddington, UK Sean Adams BOC Gases Murray Hill, NJ
More informationMWR - MWF Metallized polyester film capacitor MKT - High performance
Main applications Blocking, filtering, bypassing, timing, coupling, decoupling, general applications in electronics. Low AC voltage motor running. Low power switching applications. Low pulse operation
More informationQuartz etch process to improve etch depth linearity and uniformity using Mask Etcher IV
Quartz etch process to improve etch depth linearity and uniformity using Mask Etcher IV Sunil Srinivasan *, Jason Plumhoff, Russ Westerman, Dave Johnson, Chris Constantine Unaxis USA, Inc. 10050 16 th
More informationType 160 Metallized Polyester Radial Lead Capacitors
Specifications Type 160 Metallized Polyester Radial Lead Capacitors Radial Box Metallized Polyester Capacitors Capacitance Range: Voltage Range: Capacitance Tolerance: Operating Temperature Range: Dielectric
More informationSMB Series. SMB Series. Specifications. Interface Dimensions. Available in 50 Ohm and 75 Ohm versions. Snap-on interface reduces installation time.
Available in 50 Ohm and 75 Ohm versions. Snap-on interface reduces installation time. Self-cleaning outer spring withstands moderate vibration. Small & lightweight. Frequency Range: Up to 4 GHz Specifications
More informationSeries AM3T-VZ 3 Watt DC-DC Converter
Click on Series name for product info on aimtec.com Series AM3T-VZ FEATURES: Wide 2:1 Range 24 Pin DIP Package High up to 82% Metal Package Operating Temperature -4 o C to +85 o C / Isolation 15 or 35
More informationREFERENCE SPECIFICATION
1 / 8 1. Notification Items 1.1 Law and the regulation which are applied 1 Ozone depleting substances specified by Montreal Protocol have not been used in the manufacturing process of the material used
More informationRefinements in the Plasma Processing of Polyimide and B.C.B.
Plasma is a state of matter represented by a collection of positively charged ions and negative electrons, capable of conducting electricity and absorbing energy from an electrical supply. Lightning and
More informationPRESENTS. Solder & Oven Profiles Critical Process Variables
PRESENTS ubga s Solder & Oven Profiles Critical Process Variables Phone: 949.713.7229 Fax: 949.713.7229 For Information Please Call or E-mail palsrvs@palsrvs.com Member of: PUBLISHED BY Pan Pacific Microelectronics
More informationInvestigating the effects of interchanging components used to perform ripple assessments on calibrated vector network analysers
Abstract Investigating the effects of interchanging components used to perform ripple assessments on calibrated vector network analysers Andrew G Morgan and Nick M Ridler Centre for Electromagnetic and
More informationMIL-STD-883H METHOD EXTERNAL VISUAL
* EXTERNAL VISUAL 1. PURPOSE. The purpose of this test method is to verify the workmanship of hermetically packaged devices. This test method shall also be utilized to inspect for damage due to handling,
More informationIt is essential that the maintenance staff is qualified for electrical works and follows safety procedures.
MAINTENANCE OF POWER FACTOR CORRECTION EQUIPMENTS Procedures, suggestions and traceability The purpose of this document is to propose a maintenance method that allows to identify the elements to be maintained
More informationMeasuring the Benefits of Nitrogen for Reflow U.S. Robotics, Morton Grove, IL
Measuring the Benefits of for Reflow U.S. Robotics, Morton Grove, IL Chad Boeding, Mark Nowotarski Praxair, 777 Old Saw Mill River Road, Tarrytown, NY 10591-6799 Julie Bradbury, Denis Jean U.S. Robotics,
More informationThermal Profiling the Reflow Process
Thermal Profiling the Reflow Process The Nomadics TCProfile system is a cost-effective instrument to measure the temperature characteristics of any process where the thermal profile is important to the
More informationPSR-4000 LDI (US) (UL Name: PSR-4000 JA / CA-40 JA)
PSR-4000 LDI (US) (UL Name: PSR-4000 JA / CA-40 JA) LASER DIRECT IMAGING SOLDER MASK For LDI Exposing Available in Green, Blue, Black, Clear and Red Satin Finish Halogen-Free RoHS Compliant Compatible
More informationAmphenol RF. Type N. Type N Connectors. Type N. Description. Features/Benefits. Applications
Amphenol RF 144 Connectors Description Named after Paul Neill of Bell Labs after being developed in the 1940 s, the offered the first true microwave performance. The connector was developed to satisfy
More information3M Thermally Conductive Epoxy Adhesive TC-2810
Technical Data January, 2010 3M Thermally Conductive Epoxy Adhesive TC-2810 Product Description 3M Thermally Conductive Epoxy Adhesive TC-2810 is a boron nitride filled, two-part, thermally conductive
More information5KP-HR Series. TVS Diodes Axial Leaded 5 kw > 5KP-HR series. Description. Uni-directional
5KP-HR Series RoHS Pb e3 AGENCY Uni-directional Agency Approvals AGENCY FILE NUMBER E2353 Bi-directional Maximum Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol
More informationMMCX Coaxial Connectors
The Amphenol MMCX series is the next generation of microminiature connectors. Offering a reliable broadband performance from DC to 6 GHz. These 50 ohm connectors incorporate the industryapproved MMCX interface,
More information10 Best Practices for Electrosurgical Unit Testing
10 Best Practices for Electrosurgical Unit Testing Tips to quickly and effectively test electrosurgical devices to ensure performance and safety White Paper Let s start with the basics. Electrosurgical
More informationGENERAL APPLICATION NOTES
GENERAL APPLICATION NOTES There are common considerations when using our connectors. Additional considerations may apply based on the particular connector being used, the application, and conditions in
More informationNON-DESTRUCTIVE TECHNIQUES FOR IDENTIFYING DEFECT IN BGA JOINTS: TDR, 2DX, AND CROSS-SECTION/SEM COMPARISON
NON-DESTRUCTIVE TECHNIQUES FOR IDENTIFYING DEFECT IN BGA JOINTS: TDR, 2DX, AND CROSS-SECTION/SEM COMPARISON Zhen (Jane) Feng, Ph.D., Juan Carlos Gonzalez, Sea Tang, and Murad Kurwa FLEXTRONICS International
More informationHigh-frequency Film Type LQP03T/LQP15T/LQP15M/LQP18M Series. Rated Current (ma)
.3±.5.3±.5!Note O5E8.pdf.9. CHIP COILS High-frequency Film Type LP3T/LP15T/LP15M/LP18M Series LP3T Series The LP3T series consists of Ultra-Small chip coils with High value using Murata's original film
More informationInfrared Thermography Inspection Guidelines. Date Issued:
Infrared Thermography Inspection Guidelines Date Issued: 2002 01 29 Created By: Approved By: L. Henderson G. Durnford Table Of Contents Table Of Contents...i POLICY STATEMENT...1 APPLICABLE INTERNATIONAL
More informationPreliminary Datasheet
Device Features Low Noise Figure: NF = 0.95 @ 1900MHz High Linearity: OIP3 = 36 dbm @ 1900 MHz Output P1 db = 22 dbm @ 1900 MHz Gain = 17 db @ 1900 MHz Internally matched to 50 ohms Vdd: 5.0V Lead-free/RoHS-compliant
More informationPolarPAK Solder Joint Reliability Based on Thermal Fatigue IPC-9701
PolarPAK Solder Joint Reliability Based on Thermal Fatigue IPC-9701 By Kandarp Pandya ABSTRACT PolarPAK, a thermally enhanced package from Vishay Intertechnology, facilitates MOSFET heat removal from an
More informationGuidelines to the standard IEC60601
EUROPEAN POWER SUPPLY MANUFACTURERS ASSOCIATION (Visit the EPSMA website at www.epsma.org) Medical Approvals for Power Supplies Guidelines to the standard IEC60601 Revision Date: 2009-09-12 This document
More informationProduct Specification Spring Finger
Product Specification 108-115008-3 Spring Finger Restricted to Sony Ericsson Mobile Communications 1. SCOPE 1.1. Content This specification covers the requirements for product performance test methods
More informationCHANGE RECORDS TABLE OF CONTENTS
CHANGE RECORDS Ed./Rev. Date Verified and approved by Description Writer 1 12/31/2015 WY / LLR Initial Document FS 2 02/26/2016 FS / LLR - 1.2. : new applicable document added : validation of the mounting
More informationReliability Considerations for Power Supplies
Reliability Considerations for Power Supplies Power supplies may not have the glamour, nor get the attention that processors and displays receive, but they are just as vital to system operation. A failed
More informationImpact of Reprocessing Technique on First Level Interconnects of Pb- Free to SnPb Reballed Area Array Flip Chip Devices
Impact of Reprocessing Technique on First Level Interconnects of Pb- Free to SnPb Reballed Area Array Flip Chip Devices Joelle Arnold, Steph Gulbrandsen, Dr. Nathan Blattau IMAPS Wait, what? o There s
More information& Contact Resistance Between Cantilever Type and New MEMS Type Probe Cards
A A Comparison of Scrub Marks & Contact Resistance Between Cantilever Type and New MEMS Type Probe Cards Jae-Ha Lee Byung-Ho Jo Dr Phicom Corporation May 12, 2003 1 Probe Card Comparison Criteria 1. MEMS
More informationTVS Diodes Axial Leaded 30 kw > 30KPA-HRA series. Features. 30 kw 8.0 W 400 A. -55 to 175 C. Notes: 8.0 C/W
3KPA-HRA Series RoHS Pb e3 Descriptions AGENCY Uni-directional Agency Approvals Maximum Ratings and Thermal Characteristics (T A =25 O C unless otherwise noted) Parameter Symbol Value Unit Peak Pulse Power
More informationOuter contact 1.0 milliohm max.
MCX.4 11/27/01 5:17 PM Page 17 Connex MCX Series connectors are ideal for applications and designs where weight and space savings are critical. This series has a 50 ohm impedance structure which operates
More informationSPECIFICATIONS FOR APPROVAL
CUSTOMER :. DATE :. REV : REV. 0.0. preliminary SPECIFICATIONS FOR APPROVAL 6060 70mW 1in1 UVC LED PKG (@ If =350mA) MODEL NAME : LEUVA66H70HF00 RoHS Compliant APPROVAL REMARK APPENDIX DESIGNED CHECKED
More informationTRANSFORMER SERVICE. Dissolved gas analysis and oil condition testing
TRANSFORMER SERVICE Dissolved gas analysis and oil condition testing D I S S O LV E D G A S A N A LY S I S A N D O I L C O N D I T I O N T E S T I N G Transformer diagnostic services at ABB perform dissolved
More informationAN LFPAK MOSFET thermal design guide - Part 2. Document information
Rev. 2 16 November 11 Application note Document information Info Keywords Abstract Content LFPAK, MOSFET, thermal analysis, design and performance, thermal considerations, thermal resistance, thermal vias,
More informationType 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil
Type 715P/717P are high AC voltage, film/foil polypropylene capacitors. Well suited for high AC voltage applications requiring corona free performacnce. These capacitors are ideal in high frequency, high
More informationHow to Build A Zap Line. Presented by: Bob McCurley
How to Build A Zap Line Presented by: Bob McCurley How to Build a Zap Line Introduction: When selecting a rope for use, one of the last considerations for many would be the electrical conductivity of the
More informationApplication Note OT2M-SN100C-T3/T4
OT2M-SN100C-T3/T4 Description product The OT2M-SN100C is a next generation lead-free solder paste. The SN100C alloy is a tin copper based alloy which is eutectic at 227 C. SN100C stands for the alloy composition
More informationLead Free Reliability Team Status. John Sohn Lucent Technologies - Bell Labs Reliability Team Leader January 17, 2001
Lead Free Reliability Team Status John Sohn Lucent Technologies - Bell Labs Reliability Team Leader January 17, 2001 Agenda Acknowledgements Statement of Work Reliability Tests Component-Paste Combinations
More informationEnergy capture performance
Energy capture performance Cost of energy is a critical factor to the success of marine renewables, in order for marine renewables to compete with other forms of renewable and fossil-fuelled power generation.
More informationElectromagnetic Attacks on Ring Oscillator-Based True Random Number Generator
Introduction Attacks on TRNG Our active attack EM analysis Electromagnetic Attacks on Ring Oscillator-Based True Random Number Generator Pierre Bayon, Lilian Bossuet, Alain Aubert, Viktor Fischer François
More informationDesign Considerations for Power Supplies in High-Altitude Applications. Kevin Parmenter, VP of Applications, USA, Excelsys Technologies
Design Considerations for Power Supplies in High-Altitude Applications Kevin Parmenter, VP of Applications, USA, Excelsys Technologies Altitude Environments in Power Applications Effects of Altitude on
More informationAgilent Wedge for Probing High-Pitch ICs A Hands-Free Solution for Probing Fine-Pitch ICs
Agilent Wedge for Probing High-Pitch ICs A Hands-Free Solution for Probing Fine-Pitch ICs Application Note Making reliable, nondestructive connections to 0.5 and 0.65 mm components Table of Contents 2
More informationStandards Manager Web Standards List IPC-Association Connection Electronic Industries
Standards Manager Web Standards List IPC-Association Connection Electronic Industries Id Number Title Year Organization Page 1 1071B 2016 IPC 0 2 1601A 2016 IPC 0 3 4556 AMD 1 Specification for Electroless
More informationImprove Process Reliability
Convenient Conductivity Calibration to Meet Pharmacopeia Regulations Pharmacopeias require that conductivity measurement systems be periodically calibrated to ensure their precision. The range of accessories
More informationDCA Modified Alkyd Conformal Coating (SCC3)
Page 1 DCA Modified Alkyd Conformal Coating (SCC3) DCA is a flexible, transparent and unique modified alkyd conformal coating specifically designed for the protection of electronic circuitry. It has been
More informationDetecting sound wave of bubbles produced in a boiling liquid
Detecting sound wave of bubbles produced in a boiling liquid Angela Galvez Abstract This experiment attempted to detect the sound wave produced by bubbles in boiling water and liquid nitrogen as an application
More informationOperating Procedures for Metal Evaporator I
Operating Procedures for Metal Evaporator I Metal Evaporator I is intended as a tool and a training device. Understanding the operation of this equipment should give you a basic knowledge of vacuum and
More informationR / WOUND technology from pitch 10 to 27.5mm (Rated Voltage from 63 to 1000Vdc) PRODUCT CODE SYSTEM
Loose Taped Fig.1 Fig. 2 R60 Typical applications: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.: AUTOMOTIVE). Ød ±0.05 PRODUCT CODE SYSTEM p =
More informationMaterials, Reliability and Process Optimization. Lead Free Soldering. Department of Mechanical Engineering University of Massachusetts, Lowell
Department of Mechanical Engineering University of Massachusetts, Lowell Lead Free Soldering Materials, Reliability and Process Optimization Dr. Sammy Shina May 20, 2002 Project Team UMASS Lowell-Industry
More information15KPA-HRA Series. TVS Diodes Axial Leaded 15 kw > 15KPA-HRA series. Descritions
5KPA-HRA Series RoHS Pb e3 Descritions Uni-directional The 5KPA-HRA High Reliability Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning
More informationJSP. MKT Series J S P -
Loose Taped Fig.1 Fig. 2 JSP Typical applications: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.:automotive) Ød ±0.05 All dimensions are in mm.
More informationAssessment of correlations between NDE parameters and tube structural integrity for PWSCC at U-bends
Assessment of correlations between NDE parameters and tube structural integrity for PWSCC at U-bends S. Bakhtiari, T. W. Elmer, Z. Zeng and S. Majumdar Nuclear Engineering Division Argonne National Laboratory
More informationDUQUESNE UNIVERSITY LOCKOUT/TAGOUT PROGRAM
DUQUESNE UNIVERSITY LOCKOUT/TAGOUT PROGRAM Prepared by: Environmental Health and Safety Department TABLE OF CONTENTS Page Purpose 1 Scope 1 Introduction 2 Regulatory Requirements 2 Protective Materials
More informationCONTENTS TABLE OF MAIDA S HISTORY TERMINOLOGY & GENERAL SPECIFICATIONS. iii. LEAD CODES and TAPE & REEL STANDARD SERIES 1 HC SERIES 17
TABLE OF CONTENTS MAIDA S HISTORY TERMINOLOGY & GENERAL LEAD CODES and TAPE & REEL i ii iii STANDARD SERIES 1 HC SERIES 17 LOW PROFILE SERIES 33 THERMALLY PROTECTED SERIES 39 HIGH ENERGY SERIES LEAD CODES
More informationPresented to the IAPMO Standards Review Committee on March 7, 2016
Summary of Substantive Changes between the 2015 edition of ASSE 1070/ASME A112.1070/CSA B125.70, Water Temperature Limiting Devices, the 2004 edition of ASSE 1070, Water Temperature Limiting Devices, and
More informationR60. MKT Series R 6 0 -
Loose Taped Fig.1 Fig. 2 R60 Typical applications: blocking, coupling, decoupling, by-passing, interference suppression in low voltage applications (i.e.: AUTOMOTIVE). Ød ±0.05 Product code system The
More informationDifferential Pressure Transmiter
Differential Pressure Transmiter Description The is an economical alternative to established differential pressure transmitters. It combines state of the art electronics and a high performance sensor;
More information*NOTE: 75 OHM SERIES CONNECTORS ARE NOT INTERMATEABLE WITH THE 50 OHM SERIES.
The Connex N connectors with screw coupling are fully interchangeable with N connectors made to the MIL-C-39012 specification. Designed for use in all systems where very good R.F. and mechanical performance
More informationSX150A. Features. Typical Applications. Description
Datasheet -- Pressure Sensors: Measurement Type: Absolute; 0 psia to 150 psia, Unamplified, Representative photograph, actual product appearance may vary. Due to regional agency approval requirements,
More informationReballed Ball Grid Array Reliability Under Shock and Vibration Joelle Arnold Dr. Nathan Blattau
Reballed Ball Grid Array Reliability Under Shock and Vibration Joelle Arnold Dr. Nathan Blattau Introduction The electronics assembly market has experienced a material shift from lead (Pb) based solders
More informationEasy-to-use advice for common SMT assembly issues.
SMT TROUBLESHOOTING GUIDE Easy-to-use advice for common SMT assembly issues. Alpha Assembly Solutions SMT Troubleshooting Guide With this easy-to-use Troubleshooting Guide, you can learn to troubleshoot
More informationVLSI Design 14. Memories
Last module: Synthesis and Verilog This module Memory arrays SRMs Serial Memories Dynamic memories Memory rrays Memory rrays Random ccess Memory Serial ccess Memory Content ddressable Memory (CM) Read/Write
More informationIBIS Modeling for IO-SSO Analysis. Thunder Lay and Jack W.C. Lin IBIS Asia Summit Taipei, Taiwan Nov. 19, 2013
IBIS Modeling for IO-SSO Analysis Thunder Lay and Jack W.C. Lin IBIS Asia Summit Taipei, Taiwan Nov. 19, 2013 Agenda What is IO-SSO? Missing Components in Traditional IO-SSO Analysis Accurate On-die and
More informationECE520 VLSI Design. Lecture 9: Design Rules. Payman Zarkesh-Ha
ECE520 VLSI Design Lecture 9: Design Rules Payman Zarkesh-Ha Office: ECE Bldg. 230B Office hours: Wednesday 2:00-3:00PM or by appointment E-mail: pzarkesh@unm.edu Slide: 1 Review of Last Lecture Interconnect
More informationA i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B )
8 5 4 9 A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B ) 40S/40E/40M An Aviation and Aerospace Technologies Course 8 5 4 9 : A i r c r a f t E l e c t r i c a l S y s t e m s ( 1 2 B ) 4 0
More informationType 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil
Type 715P/717P, Orange Drop, High Voltage, Polypropylene Film/Foil Type 715P/717P are high AC voltage, film/foil polypropylene capacitors. Well suited for high AC voltage applications requiring corona
More informationTPC Report. D. Karlen T2K ND280m meeting December 7, 2004 Rome
TPC Report D. Karlen T2K ND280m meeting Rome Outline Review of current TPC concept as outlined in the TPC feasibility report (December 6, 2004) http://particle.phys.uvic.ca/~karlen/t2k Performance goals
More informationWP2 Fire test for toxicity of fire effluents
Pagina 3 di 89 TRA SFEU VTT 22.6.2009 v.2 WP2 Fire test for toxicity of fire effluents Task 2.1.2 Development of small-scale test method for fire effluents Step 1: Use of modeling Plans according to DoW:
More informationLaboratory Hardware. Custom Gas Chromatography Solutions WASSON - ECE INSTRUMENTATION. Custom solutions for your analytical needs.
Laboratory Hardware Custom Gas Chromatography Solutions Custom solutions for your analytical needs. Laboratory Hardware Wasson-ECE Instrumentation offers hardware-only solutions for advanced chromatography
More informationSMB/SMC Coaxial Connectors
The Amphenol SMB/SMC subminiature coaxial connectors with 50 ohm impedance are for applications to 4 GHz (SMB) or 10 GHz (SMC). Generally less expensive then SMA, these connectors are used primarily in
More informationGas Vapor Injection on Refrigerant Cycle Using Piston Technology
Purdue University Purdue e-pubs International Refrigeration and Air Conditioning Conference School of Mechanical Engineering 2012 Gas Vapor Injection on Refrigerant Cycle Using Piston Technology Sophie
More informationPRODUCT SPECIFICATION FOR APPROVAL
FARNELL INST UK Issue : Date of issue : Mar 08,2010 Classification: New Change PRODUCT FOR APPROVAL Product Description : Product Part Number : (Panasonic Part Number : ) Country of Origin : Malaysia (It
More informationSeismic Survey Designs for Converted Waves
Seismic Survey Designs for Converted Waves James A. Musser* GMG/AXIS Inc., Denver, CO 1720 Red Cloud Road, Longmont, CO, 80501, USA jmusser@gmg.com ABSTRACT Designing converted wave 3D surveys is considerably
More informationManufacturing Processes for WSi 2 -GPSOI Substrates and their Influence on Cross-talk Suppression and Inductance
Manufacturing Processes for WSi 2 -GPSOI Substrates and their Influence on Cross-talk Suppression and Inductance PT Baine*, HS Gamble *, BM Armstrong *, DW McNeill *, M Bain* J Hamel #, S Stefanos +, M
More informationLaboratory Hardware. Custom Gas Chromatography Solutions WASSON - ECE INSTRUMENTATION. Engineered Solutions, Guaranteed Results.
Laboratory Hardware Custom Gas Chromatography Solutions Engineered Solutions, Guaranteed Results. WASSON - ECE INSTRUMENTATION Laboratory Hardware Wasson-ECE Instrumentation offers hardware-only solutions
More information