North American Simplex Basket Strainers for Gas and Oil

Size: px

Start display at page:

Download "North American Simplex Basket Strainers for Gas and Oil"

Grant Flowers
5 years ago
Views:

Combustion North American Simplex Basket Strainers for Gas and Oil A mesh lining (304 stainless standard or 316 stainless or monel special), either 20, 40 or 100 mesh, can be provided, depending on

Basket strainer bodies are machined to accommodate an o-ring basket seal to permit fine filtration without concern regarding blow by.

1 Combustion North American Simplex Basket Strainers for Gas and Oil A mesh lining (304 stainless standard or 316 stainless or monel special), either 20, 40 or 100 mesh, can be provided, depending on the flow media and the degree of filtration required. Basket screens provide a large open area ratio for minimum pressured drop and can store large volumes of debris to minimize service requirements. Basket strainer bodies are machined to accommodate an o-ring basket seal to permit fine filtration without concern regarding blow by. A plugged bottom drain is also provided for liquid removal prior to removing the basket for cleaning. Basket strainers are designed to be mounted in horizontal pipe runs. Threaded With Bolted Standard basket strainers are not suitable for steam service. Strainers for steam service are available as special order items. Natural gas and oil basket strainers are used in high pressure supply lines to prevent dirt and debris from damaging or jamming regulators, valves and other gas train accessories. In oil lines, strainers help to filter out foreign particles that otherwise could reach the burner oil atomizer. Basket strainer bodies are available in cast iron, carbon steel (epoxy painted to help resist rust and corrosion) and stainless steel. Bodies are threaded (3 8" to 3") or flanged (1" to 8" except 1¼ "). Strainer screens are available in 304 (standard) or 316 (special order) stainless steel and monel (special order). Cast Iron body screens are perforated with 1 16" hole size standard for connection sizes 3 8" to 4" and 1 8" hole size for connections sizes 5" to 8". Carbon Steel and stainless steel body screens are also perforated with 1 16" hole size for all connection sizes, 3 8" to 8". Flanged With Bolted

2 IMENSIONS (inches) Page 2 A ±1 16" Face to Face A ±1 16" Face to Face C Top of E Basket Removal E Basket Removal C Top of B to Bottom B to Bottom Cast Iron Body imensions and Performance ata (1) ANSI Class 125 SIZE in 3 8 ½ ¾ 1 1¼ 1½ 2 2½ mm A T imension in n/a n/a n/a Face to Face (Threaded) mm n/a n/a n/a A F imension in n/a n/a n/a n/a Face to Face (Flanged) mm n/a n/a n/a 145 n/a B T imension in n/a n/a n/a CTR. Line to Bottom(Threaded) mm n/a n/a n/a B F imension in n/a n/a n/a n/a CTR. Line to Bottom(Flanged) mm n/a n/a n/a 120 n/a C T imension in n/a n/a n/a CTR.Line to Top(Threaded) mm n/a n/a n/a C F imension in n/a n/a n/a 3.00 n/a CTR. Line to Top(Flanged) mm n/a n/a n/a 77 n/a imension in 3/8 3/8 3/8 3/8 ½ ½ ¾ NPT Blow-Off (Both) mm E imension in screen removal (Both) mm Assembled Wt. lb n/a n/a n/a Threaded (approximate) kg n/a n/a n/a Assembled Wt. lb n/a n/a n/a 11.5 n/a Flanged (approximate) kg n/a n/a n/a 5.2 n/a Flow Cœfficient Carbon & Stainless Steel Body imensions and Performance ata (1) ANSI Class 150 SIZE Threaded in 3 8 ½ ¾ 1 1¼ 1½ 2 2½ mm A 1 imension in n/a n/a n/a Face to Face (Threaded) mm n/a n/a n/a A 2 imension in n/a n/a n/a n/a Face to Face (Flanged) mm n/a n/a n/a 145 n/a B 1 imension in n/a n/a n/a CTR. Line to Bottom(Threaded) mm n/a n/a n/a B 2 imension in n/a n/a n/a n/a CTR. Line to Bottom(Flanged) mm n/a n/a n/a 120 n/a C 1 imension in n/a n/a n/a CTR.Line to Top(Threaded) mm n/a n/a n/a C 2 imension in n/a n/a n/a 3.00 n/a CTR. Line to Top(Flanged) mm n/a n/a n/a 77 n/a imension in ½ ½ ¾ NPT Blow-Off (Both) mm E imension in screen removal (Both) mm Assembled Wt. lb n/a n/a n/a Threaded (approximate) kg n/a n/a n/a Assembled Wt. lb n/a n/a n/a 11.0 n/a Flanged (approximate) kg n/a n/a n/a 5.0 n/a Flow Cœfficient imensions, weights and flow cœfficients are provided for reference only. When required, always request certified drawings. Threaded s: 3/8" - 3" Flanged s: 1" - 8" Flanged

3 ORERING INFORMATION Page B Pipe Code -02 = 3 8"* -01 = ½"* -0 = ¾"* -1 = 1" -2 = 1¼"* -3 = 1½" -4 = 2" -5 = 2½" -6 = 3" -7 = 4" -8 = 6" -9 = 8" *Threaded only Body * -CI = Cast Iron -CS = Carbon Steel -SS = 316 Stainless Steel * See chart below for model/ material availability End Connection -S = Screwed (NPT threaded) -F = Flanged (ANSI Class 125 FF* or ANSI Class 150 RF*) *See chart below for Class 125/250 model/flange type availability Basket -SST = 304 SST (Fluids: Gas, Steam, Typical clean fuel oils) -316 = 316 SST (Fluids: fuels that require additional or aqueous corrosion resistance) Basket Selection -PERF = 1/16 Perf (3/8-4") and 1/8 Perf (5-8") - Cast Iron 1/16 Perf (all sizes) for Carbon and Stainless Steel with no Mesh Liner (100 SSU oil*) -20 = 20 Mesh screen (40 SSU oil*) -40 = 40 Mesh screen (steam, air, natural gas*) -100 = 100 Mesh screen (air, natural gas*) * Represents a general guideline for screen element sizes and should not be taken as absolute 8555B Simplex Strainer Threaded Body Selection Guide Selection Code Options s Available with Bolted ANSI Class Pressure/Temperature Rating (PSIG / ºF) (1) CI Cast Iron 3 8" - 3" /300F CS Carbon Steel 3 8" - 3" /300F SS Stainless Steel 3 8" - 3" /300F Selection Code 8555B Simplex Strainer Flanged Body Selection Guide Options s Available with Bolted ANSI Class Pressure/Temperature Rating (PSIG / ºF) (1) CI Cast Iron 1" - 8" (FF) /300F CS Carbon Steel 1" - 8" (RF) /300F SS Stainless Steel 1" - 8" (RF) /300F 1. Contact engineering if higher temperature ratings are required. IMENSIONS SHOWN ARE SUBJECT TO CHANGE. PLEASE OBTAIN CERTIFIE PRINTS FROM FIVES NORTH AMERICAN COMBUSTION, INC. IF SPACE LIMITATIONS OR OTHER CONSIERATIONS MAKE EXACT IMENSION(S) CRITICAL.

4 RECOMMENE SPARE PARTS Page 4 Gasket Gasket Basket Basket Threaded Flanged Ordering Replacement Baskets Only 8555B-BASKET Pipe * Mesh 8555B-BASKET Basket only for 2" Simplex Basket strainer, 304 stainless with 40 mesh liner 8555B-BASKET Basket only for 1½ " Simplex Basket strainer, 316 stainless with 100 mesh liner * See basket material selections on page 3. Ordering Replacement Gasket 8555B-GASKET - Pipe 8555B-GASKET - 6 Gasket for 3" Simplex Basket strainer WARNING: Situations dangerous to personnel and property may exist with the operation and maintenance of any combustion equipment. The presence of fuels, oxidants, hot and cold combustion products, hot surfaces, electrical power in control and ignition circuits, etc., is inherent with any combustion application. Parts of this product may exceed 160F in operation and present a contact hazard. Fives North American Combustion, Inc. urges compliance with National Safety Standards and Insurance Underwriters recommendations, and care in operation.

5 STRAINER CAPACITY level (1 16 PERF ) BASKET STRAINER CAPACITY FOR GASES level (20 ) level (40 ) level (100 ) ½ ¾ ¼* ½ ½ BASKET STRAINER CAPACITY IN GPM FOR.845 SPECIFIC GRAVITY FUEL OIL AT 1 PSI P, 60F Page 5 GPM with PERF (Unlined) GPM with 20 GPM with 40 GPM with ½ ¾ ¼* ½ ½ BASKET STRAINER CAPACITY IN GPM FOR.959 SPECIFIC GRAVITY FUEL OIL AT 1 PSI P, 60F GPM with PERF (Unlined) GPM with 20 GPM with 40 GPM with ½ ¾ ¼* ½ ½ CONTACT US: Fives North American Combustion, Inc East 71st Street - Cleveland, OH USA Tel: Fax: fna.sales@fivesgroup.com Copyright Fives - All rights reserved Bulletin 02/ B

North American Orifice Metering System

Combustion North American Orifice Metering System 8697 and M8697 Metering Orifices accurately measure gas flows to industrial burners. They are compact, inexpensive, and can be installed in individual