Specialist Access & Rescue Products Ltd. Product Catalogue 2018/19

Transcription

1 Specialist Access & Rescue Products Ltd. Product Catalogue 2018/19

2 SAR PRODUCTS Specalist Access & Rescue Products Ltd was founded in 2003 by Dave & Dorene Allport, after Troll Safety Equipment closed their factory and moved production overseas. Dave had worked for over 22 years as a Technical Specialist for rescue & rope access, designing equipment and techniques used in these areas. He founded the Troll Training School and trained Fire & Rescue Services, Police, and Military Forces around the world in rescue & rope techniques. CONTENTS Harnesses Kits Slings At SAR, we pride ourselves on manufacturing products that offer superior performance, reliability, user benefits and at the same time are cost effective. Our market knowledge and experience is what sets us apart. Our customer focused attitude ensures that we continue to offer products that are backed up with exemplary customer support. Our policy is to manufacture high quality products to meet the increased demand for safety in both the national and international markets. We are committed to customer service and quality management, having been certified with the BS EN ISO 9001:2015 standard. Our highly skilled manufacturing department is where our innovative products are transformed from raw material to finished goods, within the 15,000 sq ft facility in Greater Manchester, England. All our products are manufactured from certified quality raw materials. The finished products are subject to sample destruction testing or proof loading tests in accordance with current manufacturing standards. It is vital that every piece of safety equipment we make has been thoroughly tested and inspected by highly competent people, reassuring the user that each and every component meets the highest standards. These standards for quality are in place during all stages of production, from yarn input to shipping of the product. All of SAR s products are manufactured to the appropriate European standards required for it s equipment type. SAR Products Ltd now produces equipment that is shipped worldwide to our worldwide distributors Shock Absorbing Lanyards Adjustable Lanyards Work Positioning Lanyards Karabiners Ascenders & Descenders Back-up Devices Pulleys & Pulley Systems Bags Rope Stretchers Quadpod & Winch Accessories & Bespoke Services

3 HARNESSES HARNESSES MERLIN FULL BODY HARNESS EN361:2002, EN358:1999 & EN813:2008 Merlin 6 Full Body Harness Merlin 6 Tech Full Body Harness The Merlin full body harness has been designed for industrial rope access and technical rescue, where personnel wish to have either a wrap around or step in fit, with a pull over the head style. The wrap around fit has been constructed into all the SAR multi purpose harness range. This innovative pattern includes two independent front waist attachment points in different profiles. This is so the rope access and rescue technicians can utilise any type of rope descender without twisting the system. The Merlin is also fitted with upper D connection points at the front and rear for safety back-up and fall arrest attachment. The laminated foam and shaped shoulder pads give additional comfort to the user. The Merlin harness comes in two different forms, the standard and Merlin Tech which has the addition of a fixed chest ascender. This gives an advantage to those who employ frogging techniques for ascending. Front fixed Karabiner (standard Merlin Harness only) Front fixed Chest Croll (Merlin Tech Only) Triple front attachments (Merlin 4 & 6 only) Two side attachments. Fold back when not required. (Merlin 5 & 6 only) One rear dorsal attachment. Fold away when not required Belay loop 30kN and Dee connections 25kN Fully adjustable waist and legs Step in fitting or wrap around fitting Twin adjustment on the waist Quick clip buckles on leg loops fitted on the QC styles Laminated sandwiched closed cell foam padding Shaped waist and legs for extra comfort Polyester webbing Three reinforced catch free gear rack loops Four equipment rings Slotted waist for fitting pouches, bolt bags or tool frogs Waist circumference: Min 74cm - Max 114cm Merlin Full Body Harness Merlin 6: H0075 Merlin 6 QC: H0075QC Merlin 5: H0074 Merlin 5 QC: H0074QC Merlin 4: H0073 Merlin 4 QC: H0073QC Merlin 3: H0072 Merlin 3 QC: H0072QC Merlin Tech Full Body Harness Merlin 6 Tech: H0075T Merlin 6 Tech QC: H0075TQC Merlin 5 Tech: H0074T Merlin 5 Tech QC: H0074TQC Merlin 4 Tech: H0073T Merlin 4 Tech QC: H0073TQC Merlin 3 Tech: H0072T Merlin 3 Tech QC: H0072TQC 4 5

4 HARNESSES RAPTOR FULL BODY HARNESS EN361:2002, EN358:1999 & EN813:2008 KESTREL FALL ARREST HARNESS EN361:2002 & *EN358:1999 Raptor 4 Full Body Harness Raptor 6 Full Body Harness Kestrel 2 Fall Arrest Harness Kestrel 4 Fall Arrest Harness The Raptor 4 & 6 full body harness has been specifically designed for rope access and technical rescue personnel who prefer a multi purpose full body without a restrictive chest strap. This approach comes from years of experience being suspended in harnesses and a different approach and attitude in the evolution of harness design. Modifications to the initial concept have been made over the years thanks to the constructive input from our world wide users. The Raptor, like the Merlin has the innovative pattern that includes two independent front waist attachments points in different profiles, this is so rope access and rescue technicians can utilise any type of rope descender without twisting the system. The Raptor 6 has two side D connections that fold back flat when not required for use. The harness also has sandwich closed cell foam formed and shaped pads for waist and legs giving superb comfort. The Kestrel fall arrest harness has been upgraded and now comes in two styles with four colour choices. The harness has a front and rear attachment point for fall arrest connection. We recommend the front be used for fall arrest. The side D s on the Kestrel 4 can be folded back when not in use, therefore reducing risk of inadvertent snarling. Quick clip buckles can be fitted on the leg straps and fixed padding can also be fitted to any of the Kestrel range when ordered. The padding is made of sandwich laminated foam to give added comfort when donning, this also makes the harness easier to fit as the padding takes any twists from the webbing. Fitting is normally wrap around but can be left fastened at the chest/sternum connection to give a quicker fitting. Shoulder adjustment buckles use two square link buckles and once adjusted to fit the user will not slip during everyday use. Belay loop 30kN and Dee s 25kN Triple front attachments One rear attachment Two side attachments (Raptor 6 only) Fully adjustable waist and legs Wrap around or step in fitting Well-established and easy interlocking buckle system Twin adjustment on the waist Laminated sandwiched closed cell foam padding Shaped waist and legs for extra comfort High quality polyester webbing Four reinforced catch free gear rack loops Waist circumference: Min 74cm - Max 114cm Leg/Thigh circumference: Min 42cm - Max 70cm Weight: Raptor kg Weight: Raptor kg Raptor 4 Full Body Harness Raptor 6 Full Body Harness Kestrel 2: EN361:2002 Connections: One Sternal, One Dorsal Weight: 960g Standard size fits: S, M & L - we can make XS & XL to order Kestrel 4: Conform to: EN361:2002 & EN358:1999 Connections: One Sternal, One Dorsal and Two side Weight: 1.1kg Standard size fits: S, M & L - we can make XS & XL to order *Only the Kestrel 4 conforms to EN358:1999 The leg connection is the standard square link and twin slot buckling system with a heavy duty elastic tidy for any excess webbing to be captivated and the alternative QC fitting also has an elastic tidy. All Kestrel harnesses have the option to have fixed padding added to the harness to improve the comfort for the user. The padding is made of sandwich laminated foam to give added comfort when donning, this also makes the harness easier to fit as the padding takes any twists from the webbing. The padding can not be removed from the harness & should be requested when placing the order. Raptor 4: H0030 Raptor 6: H0031 Kestrel 2 REF: H0040 Kestrel 2 QC REF: H0042STDQC Kestrel 4 REF: H0043 Kestrel 4 QC REF: H0043STDQC 6 7

5 HARNESSES LINEMAN FULL BODY HARNESS EN361:2002, EN358:1999 & EN813:2008 New Product! WORKER FALL ARREST HARNESS EN361:2002 & EN358:1999 New Product! The Lineman harness has been designed for use by utility companies and made to be easily fitted, just like putting on a jacket. Fitted with a full set of quick clip cobra buckles, the Lineman harness can be easily fitted and removed. The front attachment point combines a quick clip cobra buckle with the D attachment point. The harness incorporates 5 attachment points. 2 front and back attachment points, designed for fall arrest, 2 for work positioning, positioned on the side of the waist belt, these can be folded back when not in use. The final attachment point is used for abseiling and belaying. The Worker harness has been designed as a fall arrest harness and also a work positioning harness. The wrap around design and shoulder padding give this harness a comfortable fit as well as a speedy fit due to the use of the cobra buckles. The shoulder pads are also fitted with lanyard parking loops to store away lanyards in a easy to reach location when not in use. The revolutionary design of the front attachment point utilises the cobra buckle with a built in D. The Lineman features 1 small and 2 large gear loops, in addition to 3 equipment rings. The back, waist and leg pads are made using high grade closed cell foam to give the maximum comfort when in use. Quick clip buckles throughout fully adjustable legs waist shoulder and back straps Fold away side D s Simple clear access label Polyester webbing 2 large and 1 small gear loop with 3 equipment rings Front chest Cobra D attachment point and Lower front connection point Flat back attachment point Reflective labels Rated to 150Kg Small Medium Size: Waist: 86cm - 137cm Legs: 47cm - 61cm Weight: 1.85Kg Large Size: Waist: 95cm - 147cm Legs: 47cm - 71cm Weight: 2kg Quick clip buckles throughout Close cell foam padding Fully adjustable legs and shoulder straps Fold away side D s Simple clear access label High grade polyester webbing 2 lanyard parking loops Flat back attachment point Front chest Cobra D attachment point Reflective labels Rated to: 150Kg Weight: 1.3Kg Lineman Harness (Small/Medium) : H0076L Lineman Harness (large) : H0076L Worker Full Body Harness: H

6 HARNESSES HAWK SIT HARNESS EN813:2008, EN12277-C:2015 & *EN36:2002 HARRIER SIT HARNESS EN813:2008, *EN358:1999 & **EN361:2002 New Design! The Hawk sit harness has been created for military and mountain rescue personnel and those who require the security and durability of a very robust harness as an alternative to that of a rock climbing harness. Quality materials, design, construction and simplicity in fitting make this the supreme personal issue sit harness. The emphasis in design was placed upon strength, stability, light weight and comfort. The Hawk delivers in all these fields and is perfect for anyone who needs to hang around. The wrap around fitting is also ideal when wearing crampons etc., but if preferred you may keep the buckles fastened to give step in fitting. The Harrier sit harnesses have been re designed and upgraded and are rated for use up to 150Kg. They are designed for rope access and technical rescue service personnel who prefer a separate sit and chest harness format to that of a multi purpose full body harness. The Harrier, like the Merlin and Raptor has the innovative pattern that includes two independent front waist attachment points in different profiles so that rope access and rescue technicians can utilise any type of rope descender without twisting the system. The Harrier has a wrap around fitting system for ease of donning and safety which stops the harness getting soiled, as is common with the step in type harness. The QC style has quick clip buckles on the leg loops and can also be made with QC buckles on the waist if so required. Front attachment Double thickness 18mm belay loop 30kN Fully adjustable waist and legs Wrap around or step in fitting Well-established and easy interlocking buckle system Laminated formed, closed cell foam padding Shaped waist and legs for extra comfort High quality polyester webbing Four reinforced gear rack loops Waist circumference: Min 74cm - Max 120cm Leg/Thigh circumference: Min 42cm - Max 70cm Weight: 814g Rated to 150kg Twin independent front attachment points - Belay loop 30kN and Dee 25kN Two side attachments (Harrier 4 models only) Fully adjustable waist and legs with twin adjustment on the waist Wrap around or step in fitting Well-established and easy interlocking buckle system on waist Laminated foam padding with shaped waist and legs for extra comfort High quality polyester webbing Four reinforced gear rack loops & four plastic gear loops Waist circumference: Min 74cm Max 114cm. Leg/Thigh circumference: Min 42cm Max 70cm. Weight: Harrier 2-1.1Kg Weight: Harrier 4-1.3Kg Rated to 150kg The Harrier has also been designed to be used with any of the SAR chest harness range as well as it s own Harrier chest harness models. *EN361 - When linked with any SAR chest harness and Link Sling. *EN358 - Harrier 4 only **EN361 - When linked with any SAR chest harness and Link Sling. Harrier 4 Sit Harness with Harrier Chest Harness Hawk: H0003 Hawk Black: H0004 NSN: Harrier 2: H0001 Harrier 2 QC: H0001QC Harrier 4: H0002 Harrier 4 QC: H0002QC 10 11

7 MERLIN SIT HARNESS EN813:2008 & *EN361:2002 MERLIN CHEST HARNESS *EN361:2002 KITE CHEST HARNESS *EN361:2002 HARNESSES The Merlin sit harness is purposely designed for climbing walls, outdoor centres and youth groups. Based on the Hawk without the padding, it s a step in style sit harness with the buckles permanently interlocked so they cannot be removed or incorrectly fastened by untrained users. It also has different coloured leg loops and waist belt for ease of fitting and checking by supervisors or instructors. When used in conjunction with the Merlin chest harness and link sling can be made into a full body harness format for more upright positioning. The Merlin sit harness is tested to the more robust industrial standard for sit harnesses rather than the climbing standard for greater peace of mind. It is made from the same special polyester webs as our other harnesses for extra strength, abrasion resistance and UV resistance. Front attachment Double thickness 18mm belay loop 30kN Fully adjustable waist and legs Wrap around or step in fitting Well-established and easy interlocking buckle system Laminated formed, closed cell foam padding Shaped waist and legs for extra comfort High quality polyester webbing Four reinforced gear rack loops Waist circumference: Min 74cm - Max 120cm Leg/Thigh circumference: Min 42cm - Max 70cm Weight: 814g *EN361 - When linked with any SAR chest harness and Link Sling. The Merlin chest harness and link sling have been designed to be used with any of the SAR sit harnesses for added comfort and protection to form a full body harness format. The Merlin chest harness and link sling have been designed to be used for climbing and mountaineering. The front loops can be used with a link sling or karabiner threaded through and then connected to the sit harness to keep the user in an upright sit position when connected. Fully adjustable chest Wrap around cross fitting Interlocking fixed shoulder buckle system High quality polyester webbing Weight: Chest 318g, Link Sling 50g The Merlin chest conforms to EN361 only when used with a SAR Sit Harness and the Link sling Link sling conforms to EN365, EN566 & EN795 *EN361 - When linked with any SAR chest harness and Link Sling. The Kite chest harness in combination with a threaded link sling have been designed to be used with any of the SAR sit harness range for added comfort and protection. The Kite can be utilised for climbing, mountaineering, rescue, intervention and technical access. The harness has front loops for use with a link sling to keep the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361. The Kite can be used for connecting a chest ascender by using the 25mm front strap threaded through the top hole of the ascender and the bottom of the ascender connected to the sit. The chest ascender can be fitted over the link sling and a karabiner in the chest loops giving the ability to be used in an instant. The link sling can be fitted and kept in position and is easily removable to swap it out, the link sling keeps the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361. The Kite & Kite QC chest harness must NOT be used on its own. Fully adjustable chest Wrap around cross fitting Interlocking shoulder buckle system High quality polyester webbing Supplied with link sling Quick Clip buckle front harness connection - Kite QC only Weight: Kite - 350g Kite QC - 445g Link sling conforms to EN365, EN566 & EN795 *EN361 - When linked with any SAR chest harness and Link Sling. Merlin Sit Harness: H0070 Merlin Chest Harness: H0071 Kite: H0010 NSN: Kite QC: H0010QC 12 13

8 HARNESSES OSPREY CHEST HARNESS *EN361:2002 & *EN12277-D HARRIER CHEST HARNESS *EN361:2002 & *EN12277-D New Product! Harrier Chest Harness Harrier Chest Plus Harness The Osprey chest harness is an improvement in design and materials of classic chest harness models produced in the past. The chest harness has fitted adjustable shoulder & chest straps for improved fit and comfort for the user. It can also be fitted with a front attachment quick clip buckle for easy donning and removal. The chest harness has front loops for use with a link sling to keep the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361. The link sling can be fitted and kept in position when used with the Osprey QC The Osprey can be used for connecting a chest ascender by using the 25mm front strap threaded through the top hole of the ascender and the bottom of the ascender connected to the sit. The chest ascender can be fitted over the link sling and a karabiner in the chest loops giving the ability to be used in an instant. The harnesses and link sling have been designed to be used for climbing, mountaineering, rescue, intervention and technical access. The Harrier Chest harness and Harrier Chest plus harness are a new design to accompany the new Harrier sit harness range. The Harrier chest harnesses are made of high grade polyester webbing and the shoulders are padded with high grade closed cell foam. The Harrier chest harness utilises a triple action karabiner on the front to attach to the Harrier sit harness and the Harrier chest plus has a sewn in chest ascender and connects to the front of the Harrier sit harness with a maillon. Both chest harnesses can be threaded into the back of the Harrier sit harness models meaning they can be permanently attached or replaced if damaged in anyway. Both models of Harrier chest harness have a quick clip buckle on the shoulder to allow faster donning or removal. Fully adjustable chest Wrap around cross fitting Interlocking shoulder buckle system High quality polyester webbing Supplied with link sling Rated to 150kg Quick Clip buckle front harness connection - Osprey QC only Weight: Osprey - 445g Osprey QC - 505g Link sling conforms to EN365, EN566 & EN795 The Osprey QC has the option to be fitted with nonremovable padding, comes with a detachable gear rack for hanging tools or light equipment, lanyard parking loops, and velcro tabs for securing lanyard legs. High grade polyester webbing throughout. Close cell foam shoulder and back pad. Front D fall arrest point only. Weight: Harrier chest: 650g Harrier chest plus: 800g *EN361 & EN12277-D - When linked with any the Harrier Sit harness range *EN361 - When linked with any SAR sit harness and Link Sling. Osprey: H0016 Osprey Black: H0016B - NSN: Osprey QC: H0016QC Osprey QC with padding: H0016FP Harrier Chest Harness: H0078 Harrier Chest Plus Harness: H0078PL 14 15

9 RESCUE STROP EN1497:2007 DOG HARNESS BUNGEE ANKLE HARNESS HARNESSES The Rescue Strop has the design of a split chest enabling the strop to be threaded around and under the casualty s arms to reduce the chance of disturbing the surrounding ground. The adjustment loops on the chest give it a large range of sizes from very young children to adults. The adjustment on the legs allows the wearer to be in a range of positions from vertical to sitting. The Rescue Strop is ideal for lifting into a sit position a person who is hanging in a fall arrest harness thereby stopping the possibility of suspension trauma. Also used for lifting people from water in a horizontal position and therefore reducing the possibility of shock. Our Dog Harness is now a well tested and proven design with updated materials which is very popular with search and rescue dog handlers. The harness comes in two sections for ease of fitting and flexibility of use for the dog with both sections being fully adjustable. The front/body harness has a padded chest for comfort and agility, with separate detachable leg loops for additional security. The harness can be winched from the main lifting/lowering point with or without the leg loops dependent upon size, shape and weight of dog. The Bungee Ankle harness is a proven and tested pattern. The harness has been re-modelled and enhanced by utilising modern materials. As there is no European standard for this type of restraint harness, we have fully tested it to a static load which is higher than the 15kN that is required for other products. However, as this is a restraint/ positioning harness only, we advise that it is backed up to a harness that is fully compliant to the standards within the country being used. (e.g. EN361). Chest: 9mm closed cell laminated foam padding and 44mm polyester webbing Three adjustment loops Back pull handle for helicopter loading Anodised alloy twist lock karabiner for rapid connection on the waist Legs: 44mm polyester webbing split leg loops Two anodized alloy twist lock karabiners for rapid connection around legs to central ring Easy buckle adjustment from vertical to sit position and visa versa Main lift connection: Large delta maillon Weight: 1.35kg Chest pad (removable). 6mm laminated closed cell foam High grade 25mm and 45mm polyester webbing Elastic retaining loops for stick light or torch Fully adjustable for Sm, Med & Lrg size dogs Weight: Chest section 300g High quality polyester webbing Close cell laminated foam ankle pads SAR-ABS buckle system Large range of adjustment Magnetic webbing tidies Static strength: 25kN Weight: 390g Rescue Strop: H0050 Dog Harness: H0015P Bungee Ankle Harness: RS

10 KITS KITS HIGH ACCESS RESCUE KIT This High Access Rescue kit uses our A-B auto-brake descender in the system. The system is pre-threaded within a rope bag as required by EN341. This system can be used as an escape/self rescue procedure, to rescue an injured person in a two man load, or as a pick-off system, lifting a fallen casualty from their lanyard, rope or sling etc. This kit can come with 25m or 50m of rope. We advise that the user be trained in use of this equipment. Weight for 50m system approx. 5.7kg All individual items conform to there own relevant EN standard Please see individual products for their specifications This kit includes: Small rescue rope bag 11mm Low Stretch Rope - 25m or 50m 1 x A-B Descender 3 x Steel karabiners 1 x 20cm Twin eye sling 1 x 240cm 25mm round superweb sling 2 x Heavy duty rope/sling protectors. Safety knife and pouch You can also add the equipment below to the kit to transfer it into a pick off rescue kit: 1 x 120cm round sling 2 x Oval Karabiners 2 x Std Pulley 1 x Extension pole 1 x Rocker 25 Meter Kit: RS020A 50 Meter Kit: RS025A Additional Pick-Off Equipment: RS

11 ROOFTOP ACCESS KIT WORK AT HEIGHT RIGGERS KIT WORK AT HEIGHT KIT KITS The Rooftop Access Kit was developed to take advantage of using either a single or twin rope safety system. It can be used as a vertical safety fall arrest system on ladders, towers, tree s etc. It can also be used as a work restraint or fall arrest system in rooftop areas where a single rope can be used to access an open edge, or a twin rope system to prevent pendulum movement. There are no knots for the user to tie as this has been taken care of by either clipping the rope karabiner directly on to an anchor (EN795) or looping around a structure or girder then clipping back into the rope loop on the slider. The kit includes: Equipment Holdall 35L Kestrel 2 Harness 4 x Gator Karabiners 4 x Oval Karabiners 4 x Rope Protectors 2 x Rockers 2 x 10cm Twin Eye Slings 11mm Low Stretch Rope - To required length Training is highly recommended for this system so that the user understands its many uses. This kit includes: Merlin 6 Full Body Harness Twin Clip Loop Lanyard Industrial Helmet RAD Rope Lanyard Equipment Bag Although these are the basic elements required for a riggers kit, we do understand these kits are very individual. Therefore, should you wish to purchase further items from our catalogue to compliment your kit or change any element, please advise and we will assist you in your selection. This kit includes: Kestrel 2 Harness Twin Clip Loop Lanyard Industrial Helmet Equipment Bag Although these are the basic elements required for the work at height kit, we do understand these kits are very individual. Therefore, should you wish to purchase further items from our catalogue to compliment your kit or change any element, please advise and we will assist you in your selection. Each kit contains all the items shown in the picture with a 50m rope. As a work restraint/positioning system it will conform to EN358 and as a vertical back-up system EN Each individual item in the kit conforms to the correct EN standards and are compatible for this use. If a harness is not required because the client already has one this can be taken out as the kit can be used with any of the SAR full body harnesses or sit harness with the chest harness linked. Kits can be adapted at the users request. Please see individual products for specifications. Kits can be adapted at the users request. Please see individual products for specifications. 25 Meter Kit: RS Meter Kit: RS021 Riggers Kit: RS033 Work At Height Kit: RS

12 SLINGS SLINGS TWIN EYE SLINGS EN354:2010, EN566:2006 & EN795-B:1997 ROCKER SLING ASSEMBLY EN354:2010, EN566:2006 & EN795-B:1997 Our Twin Eye slings are made with a 18mm polyester superweb, and are rated to 24kN when new. This conforms to the highest standards set by EN354 of 22kN. Example sizes: 10cm & 20cm Twin Eyed slings. These can be used with the Rocker or as a short extension for many things such as a cow s tails used in rope access. Our Twin Eye slings have a test strength of 24kN when new. This conforms to the highest standards set by EN354 of 22kN. The Gator karabiners are made from high grade alloy, formed from round bar then pressed to shape to give extra strength. They have a key lock on the nose and gate to stop web catching. 30cm & 60cm Twin Eyed slings. They can be used as a safety back-up link for yourself or a casualty in rescue, main ascender link sling in ascending and many other uses for the experienced technician. Rated load 24kN Made from high grade polyester webbing Individual serial number Length size variations available on request Twin eyes available to be made with 25mm webbing, increasing the rated load to 35kN Working length including karabiners 25cm Rated load 24kN High grade polyester webbing Individual serial number Karabiner conforms to: EN362 Weight: 128g Size variations available on request 10cm: S cm: S cm: S cm: S0007 Rocker Sling Assembly: S

13 SLINGS CIRCULAR SLINGS - 18mm EN354:2010, EN566:2006 & EN795-B:1997 CIRCULAR SLINGS - 25mm EN354:2010, EN566:2006 & EN795-B:1997 LINK SLING EN354:2010, EN566:2006 & EN795-B:1997 PERSONAL POSITIONING SLING EN354:2010, EN566:2006 & EN795-B:1997 These Circular Slings are made using a 18mm polyester superweb and have a tensile strength of 24kN which is far above the required standard. Standard sizes for the 18mm sling include 20cm, 30cm, 60cm, 150cm, 240cm, & 490cm. However the slings can be made to any required length requested by the client. This type of sling is possibly the most used sling around the world. It has many uses for the experienced rope technician such as: anchors/ belay s, self equalizing belay, foot loops for traversing, high steppers. These Circular Slings are made using a 25mm polyester superweb and have a tensile strength of 35kN which is far above the required standard. Standard sizes for the 25mm sling include 120cm & 240cm, but can be made to any required length. The most popular size for the circular sling is 240cm, this is because it has many uses for the experienced rope access or rescue technician in a variety of environments such as; anchors/belay s, self equalizing belay, foot loops for traversing and as high steppers. Our Link Sling is made from high grade polyester with a weave that keeps the locking stitch away from the edge to help reduce wear/ abrasion. It is made in two different lengths which are colour coded, 15cm for children and 20cm for adults. Longer slings can be made if required, along with all black versions. It is the main link between any of our chest and sit harnesses to form a full body harness, compliant with EN361 (Personal protective equipment against falls from height - full body harnesses). The Personal Positioning Sling (PPS) was designed for rescue technicians as a means of adjusting their height to that of the casualty they are rescuing. It complies to the same standards as our other slings and if required can be used in their place. The rescuers PPS has been produced the same way as the Twin Eye sling, with a 18mm polyester superweb, and a test strength of 24kN when new, which confirms to the highest standards set by EN354 of 22kN. The PPS also has an addition of a full wrap of protection on the top and an extension tail of 1m to help with adjustment. Please Note: working length is half the advertised sling length. Please Note: Working length is half the advertised sling length. Rated load 24kN High grade polyester webbing Individual serial number Size variations available on request. Rated load 35kN High grade polyester webbing Individual serial number Size variations available on request. Rated load 24kN High grade polyester webbing Individual serial number Colour coded between sizes Standard length: 20cm Child length:15cm Weight: 38g Size variations available on request. Rated load 24kN High grade polyester webbing Individual serial number Size variations available on request. 20cm: S cm: S cm: S cm: S cm: S cm: S cm: S cm: S cm: S cm: H cm: H0020 NSN: cm: S

14 WIRE ANCHOR STROP EN354:2010, EN795-B:1997 & PD CEN/TS B:20013 TRI SLING EN354:2010, EN566:2006 & EN795-B:1997 ANCHOR STROP EN354:2010, EN566:2006 & EN795-B:1997 CIRCULAR ROPE SLING EN566:2006 & EN795-B:1997 The Anchor Strop is made from 30mm heavy duty polyester webbing with two reinforced eyes to allow a karabiner to be passed through. This heavy duty sling is for use on steel structures. Our Rope Sling can be used for many different applications. The high-twist 32-strand mantle braid provides high dirt resistance, better grip and high abrasion protection. The sling has a tensile strength of 22kN. SLINGS Rated load 40kN Heavy duty polyester webbing Individual serial number Size variations available on request. Material: Nylon Size variations available on request. Weight: 80g per metre Sling strength: 22kN For specifications of the rope used, please see page 61 50cm Strop: L0013 1m Strop: L m Strop: L cm: S cm: S0056 We have upgraded our Wire Anchor Strop, it now conforms to an additional standard and can be made from two different materials. Galvanised steel wire: It has a breaking load of 27kN and a safe working load of 270kg. Stainless steel wire: This wire has a slightly lower breaking load of 25kN, with a safe working load of 250kg. The strop can be supplied without the protective sleeve and without the thimble eye. The can be made to any length you require. Material: 6mm galvanised or stainless steel wire Manufactured to any size you require Sling strength: 27kN/25kN Option of thimble eye Option of protective sleeve The Tri-Sling was developed after a request for a product that would comply with EN354, the industrial standard for lanyards and not just the lower standards EN566 for sports climbing and EN795-B industrial anchor. It carries all three standards so that any client who has a certain standard written into their files for use has a choice. It was developed for multi use in outdoor centres. It can be connected to the user by any connecter conforming to EN362 or EN12275-Q or it can be choke hitched via the protection covered loop. It can be used to clip back into its ring forming a loop in one leg of the lanyard. The sling is made with 18mm polyester webbing and a polished alloy ring. Colours: Blue and Black (other colours available on order) Material: Polyester webbing, polished alloy ring Individual serial number Size: Blue legs 63cm Black leg 28cm Overall length 84cm Weight: 204g Sling strength: 24kN Ring strength: 25kN EN354, EN566 & EN795-B Size variations available on request. Y SHAPED ROPE LANYARD EN354:2010 The Y-Shaped Rope Lanyard has multiple applications, with a tensile strength of 22kN. The high-twist 32-strand mantle braid provides for high dirt resistance, better grip and high abrasion protection. Material: Nylon low stretch rope. Sizes: Size variations available on request. Sling Strength: 22kN. Note: These lanyards are not to be used for fall arrest. Lanyards complying to EN354 must be used in conjunction with an energy absorber complying to EN355 for fall arrest and not to exceed 2m in length. ROPE LANYARD EN354:2010 The Standard Rope Lanyard has a tensile strength of 22kN. The high-twist 32-strand mantle braid provides high abrasion protection, better grip and high dirt resistance. Material: Nylon low stretch rope. Sizes: Size variations available on request. Sling Strength: 22kN. Note: These lanyards are not to be used for fall arrest. Lanyards complying to EN354 must be used in conjunction with an energy absorber complying to EN355 for fall arrest and not to exceed 2m in length. N/A Tri Sling: S cm Lanyard: L cm Lanyard: L cm Lanyard: L cm Lanyard: L m Lanyard: L m Lanyard: L m Lanyard: L

15 SHOCK ABSORBING LANYARDS SINGLE & TWIN CLIP LOOP LANYARD EN355:2002 The Single Clip Loop Lanyard is made using 25mm polyester superweb with a total length of 1.3m. It has a protected connection eye on the leg of the lanyard. This is so the user can wrap the lanyard around larger anchors and still load the connector/karabiner in the correct profile. This also shortens the lanyard therefore reducing any potential fall distance. The lanyard can be supplied with or without scaffold hooks & karabiner. Any connector from our range conforming to EN362 can be fitted to the lanyard. SHOCK ABSORBING LANYARDS Material: 25mm polyester superweb Clip loop eyes: 2 per leg Length from absorber eye to fly end eye: 1.3m. Length when fitted with karabiner/connector: 1.6m Maximum working load 130kg Weight: Single Leg: 445g (for a 1.3m without connectors) Twin Leg: 475g (for a 1.3m without connectors) Conforms to EN355:2002 shock absorbing lanyard Note: Other lengths can be made, up to a max. total length of 2m or the lanyard can be supplied without any connectors fitted For more details on all of our connectors please see pages Single Leg: L0010S (without Scaff Hooks) Single Leg: L0010SC (with Scaff Hooks) Twin Leg: L0010T (without scaff hooks) Twin Leg: L0010TC (with scaff hooks) 28 29

16 TWIN CLIP BACK LANYARD EN355:2002 TWIN ROPE LANYARD EN8513:2009 SINGLE & TWIN ROPE LANYARD EN355:2002 The Twin Clip Back Lanyard has been designed to give real benefits to the user. It complies with all the required European standards for fall arrest and impact forces. It has two separate slings complying with EN795, EN566 & EN354. The shock absorber is compliant with EN355 and the connectors are compliant with EN362 & EN12275-Q. Each sling has a webbing protection and reinforced eyes. Each sling leg can be replaced by SAR if damaged, increasing the usable life of the lanyard. The lanyard has a total length of 1.6m. Other lengths can be made up to a max total length of 2m. The lanyard can also be supplied with or without any connectors fitted. This Lanyard meets the BS EN8513 standard and can be made no more than 1.5m long including connectors. The lanyard is supplied with none detachable connectors conforming to EN362 to meet the standard. Our Twin Shock Absorbing Rope Lanyard is made using a nylon 11mm low stretch rope. This product is the right choice for many different applications. The high-twist 32-strand mantle braid provides for high abrasion protection, better grip, and high dirt resistance. The lanyards are fitted with a large aluminium ring so that the connector on the fly end can be clipped back or parked in position. Our Single & Twin Shock Absorbing Rope Lanyards are made using a nylon 11mm low stretch rope. This product is the right choice for many different applications. The high-twist 32-strand mantle braid provides for high abrasion protection, better grip, and high dirt resistance. The lanyards are fitted with a large aluminium ring so that the connector on the fly end can be clipped back or parked in position. All connectors fitted conform to EN362. Our rope lanyards come in the standard white with red fleck or black on request. SHOCK ABSORBING LANYARDS Standard: Total length 1.6m Standard: length of each leg 1.2m Weight: 1.65kg Maximum working load 130kg Note: Other lengths can be made, up to a max. total length of 2m or the lanyard can be supplied without any connectors fitted Material: Nylon 11mm low stretch rope Sizes: 1.5m Weight: 1.7kg Maximum working load 130kg Size variations available on request under 1.5m Material: Nylon 11mm low stretch rope Standard size 1.3m, variations on request Maximum working load 130kg For more details on all of our connectors please see pages Without Scaffold Hooks: L0001 With Scaffold Hooks: L0005 Twin 1.5m with connectors: L0021F Single 1.6m with connectors: L0019C Single 1.3m without connectors: L0019 Twin 1.6m with connectors: L0021C Twin 1.3m without connectors: L

17 ADJUSTABLE LANYARDS ADJUSTABLE ROPE LANYARD EN354:2010 & EN358:1999 EASY ADJUST ROPE LANYARD EN358:1999 The Adjustable Rope Lanyard is a good choice for many different applications. Made with a galvanised steel slide buckle and with a tensile strength of 22kN, the high-twist 32-strand mantle braid provides high abrasion protection, better grip and high dirt resistance. This lanyard is ideal for work positioning and work restraint and also passes the full standard EN354. Material: Nylon 11mm low stretch rope Sizes: variations on request Lanyard strength: 22kN Note: These lanyards are not to be used for fall arrest. Lanyards complying to EN354 must be used in conjunction with an energy absorber complying to EN355 for fall arrest and not to exceed 2m in length 1m Lanyard: L m Lanyard: L ADJUSTABLE WEBBING LANYARD This style of Adjustable Rope Lanyard, utilising an aluminium buckle is a good choice for many different applications where easy adjustment is needed. With a tensile strength of 15kN, the high-twist 32-strand mantle braid provides high abrasion protection, better grip and high dirt resistance. This lanyard is ideal for work positioning and work restraint and is also a favourite for high rope course centres. Material: Nylon 11mm low stretch rope Sizes: Eye size and length variations on request Lanyard strength: 15kN Note: These lanyards are not to be used for fall arrest EN358:1999 1m Lanyard: L AL 1.5m Lanyard: L AL ADJUSTABLE LANYARDS The Adjustable webbing lanyard is a good choice for many different applications. With a tensile strength of 15kN, made of high spec polyester webbing. This lanyard is ideal for work positioning and work restraint. New Product! Material: High spec 25mm polyester webbing Colours: Orange, Black, Blue, Yellow or Olive green Lanyard strength: 15kN Length: Variations on request. 1m Lanyard: L m Lanyard: L

18 WORK POSITIONING LANYARDS RAD - WORK POSITIONING LANYARD EN358:1999 & EN12841-C Our Rope Adjustment Device (RAD) evolved from our A-B Descender. Both multi functional devices, the RAD is smaller, lighter and has been tested to and conforms with more European standards for a wider variety of applications. This means that the RAD can be used as a stand alone device in many more environments, therefore reducing the need for multiple devices and increased cost. The RAD fully conforms to EN12841:2006-C, EN358:1999 & EN15151:2012 Type 6. The swivel plate screw can be removed and the device opened for changing rope if inadvertently damaged during work, or for fitting onto a descent rope. WORK POSITIONING LANYARDS The RAD can be fitted with any length of rope you require. The rope used is our 11mm with a sewn eye at one end and a sewn block/stopper at the fly end. Any connector from our range complying to EN362 can be fitted to the rope. The RAD can be used in many environments where an adjustable lanyard, pole strap/rope or restraint is required. Average static load with above rope before creep 4kN Static strength as in the test 15kN for 3mins Weight: 315g + 80g per Meter of rope Material: High strength alloy plates and handle anodized with stainless steel cam and spindles Colour: Black Rope colour: white with red fleck/black on request Size variations available on request Conforms to EN 358 & EN12841-C with no connector 2m: RAD-2M 3m: RAD-3M 4m:RAD-4M 5m: RAD-5M with alloy hook 2m: RAD-2MH 3m: RAD-3MH 4m: RAD-4MH 5m: RAD-5MH with scaffold hook 2m: RAD-2MS 3m: RAD-3MS 4m:RAD-4MS 5m: RAD-5MS 34 35

19 KARABINERS GECKO KARABINER EN362:2004 The Gecko is versatile and light. The Gecko is made from high grade alloy bar, which is then pressed into shape to give it extra strength. This karabiner features a key lock design on the nose and gate to stop web catching. Material: Alloy, anodized black or gold screw gate Strength: 30kN Gate opening strength: 10kN Sideways strength: 9kN Gate open size: 22mm Weight: 84g Length:114mm Width: 78mm Individual serial number GATOR KARABINER Material: Alloy, anodized black screwgate. Strength: 25kN Gate opening strength: 8kN Sideways strength: 8kN Gate open size: 15mm Weight: 47g Length: 100mm Width: 64mm Individual serial number EN362:2004 The Gator karabiner, designed originally for sports climbing. The Gator is used for the rocker back-up sling assembly but is also ideal for use as a small spare karabiner for carrying accessories. The Gator is made from high grade alloy bar, which is then pressed into shape to give it extra strength. This karabiner features a key lock design on the nose and gate to stop web catching. Gecko: K0001 Gator: K0016 KARABINERS KLET KARABINER EN362:2004 The Klet karabiner is ideal for kits where weight is a factor and technical rope work required. It has a wide base and excellent gate clearance. Made from high grade alloy bar, which is then pressed into shape to give extra strength, and a high tensile strength for its large size. The Klet features a screw closure and its key lock design gives it a catch free gate. Material: Alloy, anodized black or lobster Strength: 30kN Gate opening strength: 11kN Sideways strength: 10kN Gate open size: 26mm Weight: 91g Length: 119mm Width: 77mm Individual serial number Lobster Klet: K0005L Black Klet: K0005B NSN:

20 LITE KLET STEEL KLET EN362:2004 The Lite Klet karabiner is ideal for kits where weight is a factor and technical rope work required. It has a wide base and excellent gate clearance. Made from high grade alloy bar, which is then pressed into shape to give extra strength, and a high tensile strength for its large size. This variation of the Klet has the availability of having a pin fitted, making it ideal for adding to lanyards. Material: Alloy Strength: 30kN Gate opening strength: 10kN Sideways strength: 10kN Gate open size: 25mm Weight: 72g Length: 110mm Width: 65mm Individual serial number EN362:2004 Lite Klet: K0003 HMS STEEL KARABINER STEEL OVAL KARABINER EN362:2004 The HMS Steel karabiner is made from high grade steel, formed from round bar, has a screw gate and its strength has been increased to 50kN making it the ideal karabiner for industrial use in technical access and rescue as team kit. Strength: 50kN Gate opening strength: 12kN Gate open size: 23mm Weight: 266g Length: 125mm Width: 74mm EN362:2004 HSM Steel: K0009 KARABINERS The steel variation of our Klet karabiner. The steel Klet has the same dimensions as the alloy Klet, a wide base and excellent gate clearance. Its heavier weight has the added benefit of almost doubling the tensile strength of the alloy version. The standard Steel Oval karabiner with screw gate, with a high weight to strength ratio giving a high tensile strength making this a very versatile karabiner. This karabiner features a screw closure and its key lock design gives it a catch free gate. Material: Steel zinc plated Strength: 50kN Gate opening strength: 20kN Sideways strength: 15kN Gate open size: 25mm Weight: 235g Length: 119mm Width: 77mm Individual serial number Steel Klet: K0007 Material: Heat treated alloy, steel plated screwgate Strength: 25kN Gate open size: 18mm Weight: 174g Length: 107mm Width: 56mm Individual serial numbered on request Steel Oval: K0017 TRIPLE ACTION KLET EN362:2004 ALUMINIUM HOOK EN362:2004 The Triple Action Klet karabiner with a triple action lock gate, as with all of our Klet rage it features a high weight to strength ratio giving a high tensile strength making this a very versatile karabiner. Our Aluminium Hook is ideal for use as a terminal and directional connector for lanyards. The double gate makes it easy to handle when wearing gloves and is shaped to protect the levers in case of impacts on flat surfaces. Material: Alloy Strength: 30kN Gate opening strength: 11kN Sideways strength: 8kN Gate open size: 26mm Weight: 98g Length: 119mm Width: 77mm Individual serial number Triple Action Klet: K0004 Weight: 144g Gate opening gap: 21mm Eye diameter: 18mm Length: 134mm Width: 68mm Material: Aluminium Finish: Natural Minimum breaking strain: 25kN Aluminium Hook: K

21 DOUBLE ACTION SCAFFOLD HOOK EN362:2004 The Double Action Scaffold Hook is the ideal connector for use on lanyards. The large gate opening makes this a versatile connector when working around steel work. DEE STEEL MAILLON EN12275 & EN362:05/Q The Dee Steel maillon was initially used by the sport & caving industry as a front connection to their sit harness. It allows the joining of the two webbing loops and also allows multiple connections of other mailions or karabiners. Weight: 490g Gate opening: 65mm Eye diameter: 30mm Number of actions: 2 Material: Aluminium Finish: Anodised Colour: Natural Minimum breaking strain: 25kN TRIPLE ACTION SNAP HOOK EN362:2004 Double Action Scaffold Hook: X0035 Material: Mild steel galvanised Strength: 25kN Gate open size:18mm Weight: 174g Length: 107mm Width: 56mm Individual serial numbered PEAR STEEL MAILLON EN12275 & EN362:05/Q 10mm: M0006 KARABINERS The Triple Action Snap Hook is fitted with a third action catch for increased safety. This triple-action hook is ideally suited for lanyards where triple action connectors are required. The safety heel further reduces the risk of accidental opening and the Blind nose helps to prevent rope snagging. The Pear Steel maillon is used as an added connection to the front of sit harness, giving a second or third independent connection point. It is also used in certain techniques in rescue for a multi connection point and its shape gives an added advantage to using the Dee or Delta maillon. Weight: 108g Gate opening gap: 22mm Eye diameter: 20mm Material: Aluminium Finish: Anodized Colour: red/grey, all black on request Minimum breaking strain: 27kN Individual serial number Triple Action Snap Hook: X0079 Material: Mild steel galvanised Strength: WLL 720kg Break load approx. 36kN Gate open size: 20.5mm Wire size: 10mm Height: 118m Width: 65mm Weight: 184g Individual serial numbered 10mm: M0009 DELTA STEEL MAILLON EN12275 & EN362:05/Q OVAL STEEL MAILLON EN12275 & EN362:05/Q The Steel Delta maillon is used mainly in rescue and rope access. It is used for three way loads, for equalizing two single pulleys to work as twin, to fix a pulley to an ascender for using it as a pulley brake and as a lifting link on stretcher straps to mention just a few. The Oval Steel maillon is a long opening maillon and is possibly the most used style of all the maillon products. This maillon will cover most requirements in rope access and rescue, and can be used in lots of different areas. 10mm Delta 8mm Delta Material: Mild steel galvanised Strength: 45kN Gate open size: 12mm Wire size: 10mm. Height: 88mm Width: 66mm Weight: 158g Individual serial numbered Material: Mild steel galvanised Strength: 27.5kN Gate open size: 10mm Wire size: 8mm Height: 73mm Width: 56mm Weight: 92g Individual serial numbered 10mm Steel: M mm Black: M0001B 8mm Steel: M0004 8mm Black: M0004B Material: Mild steel galvanised Strength: WLL 800kg Break load approx, 40kN Gate open size: 16mm Wire size: 7mm Height: 78mm Width: 30mm Weight: 61g Individual serial numbered 7mm: M

22 ASCENDERS & DESCENDERS A-B DESCENDER EN341-B:2011 and EN12841-C:2006 Our A-B Descender has been designed for technical rope access, intervention, and rescue. It has a handle style control that can be used in two modes, either squeeze the handle or flip it down to give extra leverage when required. There is a spring fitted to help keep the handle close to the body when not in use and is also fitted with a panic grab brake. The A-B fully conforms with two European standards, these are; EN12841-C rope adjustment device (descenders) and EN341-B descenders for rescue. The two standards are very different, EN12841-C covers the device only, so that it can be used with different types of kernmantle rope. EN341 is the standard for a descent rescue/egress system and any system conforming to this standard must be used with the type of rope with which it was tested. ASCENDERS & DESCENDERS Any strength quoted is when the product is new and is in accordance with the appropriate standards. Rope: 10.5mm to 12.5mm kernmantle Max Load: 300kg Control: Leaver/Cam & panic grab brake Weight: 442g Sample tests: Min. Static Slip: 4.5kN 10.5mm x 22 plait Route 44 Singing rock, 5.5kN 24 plait SAR. 8kN 12.5mm x 20 plait Cousin Dynamic impact and slip distance 100kg FF1-1M: 10.5mm = 5.1kN & 51cm 6.2kN & 26cm, 12.5mm = 7kN & 15cm Gold A-B: RA002 Black A-B: RA002B NSN:

23 RAD - ROPE ADJUSTMENT DEVICE EN12841:2006-C, EN15151:2012 Type 6 & EN358:1999 PRO ALLP TECH EN341-B:2011 and EN12841-C:2006 Our RAD (Rope Adjustment Device) evolved from our A-B Descender. Both multi functional devices, the RAD is smaller, lighter and has been tested to and conforms with more European standards for a wider variety of applications. This means that the RAD can be used as a stand alone device in many more environments, therefore reducing the need for multiple devices and increased cost. The RAD is capable of being used in many environments as a belay device or as a descender. The Pro ALLP Tech was the result of years of technical development and research and was originally designed for technical rescue. The screw control system of the Pro ALLP Tech has very fine speed control which allows the technical rope user a finer management of descent, especially in rescue. The Pro ALLP Tech was the first descender to be tested to pren C rope adjustment devices. Most personnel are lead to think that EN341 is the standard for descenders but this is incorrect. EN341 is descenders for rescue, which is a system, not an item of equipment, to fully conform with this standard the descender must be sold with the correct rope as a package. The Pro ALLP Tech was tested under laboratory conditions and was proven to be compatible with low stretch ropes of 10.5 to 12.7mm from one manufacturer, in compliance with EN1891. The Pro ALLP Tech was also tested with a 200kg mass at F.F.1 1m. We strongly recommend the that users be trained in the many applications of the Pro ALLP Tech. ASCENDERS & DESCENDERS Weight: 310g EN12841:2006-C mm Rope Diameter rated to 200kg EN358: mm Rope Diameter rated to 200kg EN :2012 Type mm Dynamic Rope Diameter Material: High strength alloy plates and handle anodized with stainless steel cam and spindles. Control: Screw and Lever Weight: 575g Min Static slippage: 3.5 kn Min Static load: against a barrel knot: 15kN Max Impact:100kg mass F.F.2 with 1m strop: 6kN RAD: X0147 Black Pro ALLP Tech: RA001B 44 45

24 FIGURE OF 8 WITH EARS CLEAN CAM ASCENDER EN567:1997 & EN12841:2006-B STANDARD ASCENDER EN567:2013 CHEST CROLL EN567:2013 & EN12841:2006-B The Figure of 8 descender is used for lowering or abseiling. Manufactured from high strength aluminium alloy. It has a large eye with room for an extra karabiner and ears to prevent the rope rolling into a locked position. The figure of 8 does twist the rope and is best used on firm rather than soft rope. It is not recommended for use with rope that comes straight out of a rope bag. It should only be used with a back-up safety lock, such as a Rocker or Prussic style rope lock. The Clean Cam Ascender is made for continuous use in the most arduous of conditions. The frames are formed using high strength aluminium plate and it has a stainless steel self clean cam. The handle grip is of soft moulded nylon. This product comes as right and left handed. Right handed having a orange body & the left handed having a black body. The Right handed ascender is also available in all back. The Ascender is made for continuous use in the most arduous of conditions. The frames are machined from high strength extruded aluminium and have a stainless steel cam. This product comes as right or left handed, the right having a green handle and the left red. When tested on a 12.7mm superline there was a primary failure of the rope sheath at 11kN with the ascender still operable. The chest croll was designed to fit flat against the body around the upper stomach/lower sternum area of the chest. Use along with a handled ascender and foot loop for ascending rope. It can be connected to any of our harness range. Our Kite chest harness has the required connection strap included in its design to fit into the top strap hole of the Croll without the need for an extra shoulder strap. ASCENDERS & DESCENDERS Rope size: 9 13mm dia. MBS: 35kN Colour: Black Material: Anodized aluminium. Colour: Right Handed: Lobster or Black - Left Handed: Black Fits Rope Size: 8mm to 13mm Weight: 216g Material: Anodized aluminium Colour: Left Handed Red, Right Handed Green Weight: 400g Rope dia: 10 to13mm Material: Anodized Aluminium Colour: Black Fits Rope Size: 8 to 13mm Weight: 130g Standard: EN567 From summer 2015 this product will also conform to EN1284:2006-B for 10-13mm rope at 100kg Figure of 8: RA017 Left Handed Black: RA022B NSN: Right Handed Lobster: RA023L Black: RA023B NSN: Left Handed: RA004 Right Handed: RA005 Chest Croll: RA

25 BACK UP DEVICES BACK UP DEVICES ROCKER BACK-UP DEVICE EN353-2:2002, EN358:2000 & EN12841-A:2006 The Rocker is primarily used as a safety back-up in industrial rope access, fire service or technical rescue as a fall arrest device in the event of main line failure. It can also be used as a rescue back-up device for two people as the Rocker has been tested for this purpose using a 200kg mass in a fall factor two scenario. The test was undertaken using an 11mm, 32plait low stretch rope and a 1m sling. The maximum impact recorded was 5.7kN, with a slip distance of 1.10m. The Rocker complies to EN353-2:02, EN358:00 and EN12841-A:06. We recommend it to be used with a 10 cm Rocker link sling with two Gator karabiners. This set up comes as a kit for use with the Rocker and we highly recommend it to be connected to the chest connection point on the harness. This would put the user in an upright position and is therefore compliant with fall arrest standards. It is for this reason it is also not recommended to be used with a long cow s tail from the waist connection point of the harness. Average static load: 3.5kN Max dynamic impact: 5.9kN Static strength: 15kN Max dynamic impact: 200kg 5.7kN Max Static 350kg Weight: 169g Material high strength alloy with hard anodising on cams Uses: Fall arrest back up device Work positioning locking device Horizontal safety line absorbing anchor Rope Access & Rescue safety back-up Pulley brake Ascender Belay brake This device can also be used in many other situations i.e. as a hauling/ pulley bake etc. The Rocker was confirmed in the U.K. H.S.E. industrial rope access investigation into items of personal protective equipment as the best performer and to have the highest degree of consistency. We strongly recommend that users be trained in use of the Rocker. Gold Rocker: RA003 Black Rocker: RA003B NSN: Rocker Sling Assembly: S0014 Rocker Sling Assembly For more information see page

26 PULLEYS & PULLEY SYSTEMS MINI PULLEYS EN12278:1998 STANDARD PULLEYS EN12278:1998 This Mini Pulley has been designed for the individual and as an aid for the big wall climbers in the sporting environment. This Standard Pulley size is the most common. The standard single pulley can be used in all situations. With knowledge and experience it is the ideal pulley to be used in a rescue teams or access teams kit. PULLEYS & PULLEY SYSTEMS Side plate size: Height 75mm Width: 45mm Material: High grade alloy Strength: 36kN Weight: 87g Max 13mm rope Individual serial number Side plate size: Height 90mm Width: 52mm Material: High grade alloy Strength: 36kN Weight: 158g Max 13mm rope Individual serial number The Double Pulley has been produced for those who prefer specific kit systems. Both styles have swivel cheek/side plates for ease of fitting to rope. The Double Pulley of this set is mainly used in systems that are pre-rigged or as traveller pulleys along twin line cable-ways. Side plate size: Height 94mm Width: 44mm Material: High grade alloy Strength: 36kN Weight: 153g Max 13mm rope Individual serial number Side plate size: Height 110mm Width: 52mm Material: High grade alloy Strength: 36kN Weight: 284g Max 13mm rope Individual serial number Single Mini Pulley: P0010 Double Mini Pulley: P0014 Single Standard Pulley: P0016 Double Standard Pulley: P

27 SINGLE DOUBLE ENDED PULLEY EN12278:1998 SINGLE STEEL PULLEY EN12278:1998 & NFPA 1983 CASUALTY PULLEY SYSTEM RESCUE PULLEY SYSTEM The Single Double Ended pulley is used in systems along with the double pulley. It can be used for all the same uses as the standard single with a extra connection point. This makes the product ideal where there is a requirement for the twin connections. The Single Steel Pulley has been designed for use with wire rope and for use on zip wires. The bushing bearing on this pulley is ideal for high loads. A Double Steel Pulley can be produced on request Our Casualty Pulley System uses small marine grade pulleys and 6mm prussic cord and is used to lift casualties onto stretchers or transfer their load from safety lines, slings or rope to the rescuer or rescue system. It has a 6:1 mechanical advantage ratio and when tested with the cord and positioned in its locking cleat held at 9kN. It is both neat and compact and comes as shown with chest ascender and karabiner fitted complete with its own storage pouch. The Rescue Pulley System is made from marine grade pulleys and 8mm kernmantle cord, has an integral twin cam brake that can be set at differing angles for positive locking or unlocking and has a 3:1 mechanical advantage ratio. It is an ideal piece of kit for getting an injured worker up a cable line, off an activated lanyard or transferring from rope to rope, along with many other emergency applications. It must always be used along with a safety back-up system. PULLEYS & PULLEY SYSTEMS Side plate size: Height 126mm Width: 52mm Material: High grade alloy Strength: 36kN Weight: 181g Max 13mm rope Individual serial number Side plate size: Height 130mm Width: 88mm Material: Stainless steel Finish: Polished Strength: 40kN Weight: 398g Max 13mm rope Max working length: 2m Pulley working ratio: 6-1 W.L.L. 150kg safety factor 6-1 Pouch Size: 20cm x 16cm x 7cm Weight: 812g Fits onto harness waist belt and comes with its own waist strap Variations in lengths on request Max. working length from the casualty: 7.5m Max. working length from top anchor: 10m W.L.L. 150kg safety factor 6-1 Pulley working ratio: 3-1 Weight: 2kg Bag size: 40cm long x 20cm dia Variation in lengths on request Single Double Ended Pulley: P0018 Single Steel Pulley: P Pulley System: P Pulley System: P

28 BAGS BAGS ROPE BAGS Our Rope Bags are available in four sizes and six different colours. All SAR bags have an outside pocket for any documentation such as the rope record card, draw cord closure and fitted stainless steel hauling karabiner. Our small bag has one simple adjustable shoulder carrying strap. The medium, large and ex. large bags have twin adjustable shoulder straps and a side carrying strap. All the bags are made from heavy duty high grade PVC reinforced polyester. The Rescue Rope Bag is a customised version of our rope bag with a red reflective rescue label and reflective strip. The bags can be any colour within our stock range, with red being the standard colour for rescue bags. Sizes: Small Bag - 20Ltrs or 66m of 11mm rope Medium Bag - 30Ltrs or 100m of 11mm rope Large Bag - 50Ltrs or 200m of 11mm rope X Large Bag - 84Ltrs or 250m of 11mm rope Rope Bags Small Bag: B0003 Medium Bag: B0006 Large Bag: B0009 X Large Bag: B0012 Rescue Rope Bags Small Rescue Bag: B0008 Medium Rescue Bag: B0007 Large Rescue Bag: B

29 EQUIPMENT BACKPACK The Equipment Backpack has been designed for rope access and rescue personnel to carry their individual equipment such as harness, helmet, slings, karabiners etc. On the outside front panel is an equipment draw cord for carrying such items as rope, splints, etc. It has two rucksack style shoulder straps and top carrying handle. Equipment Backpack: B0015 CRAG KIT BAG The Crag Kit Bag was designed in association with the Oldham Mountain Rescue Team. With a number of compartments on internal walls that fold out it is an ideal way to keep the team kit knowing that it is all in the one bag and easy to access. The Crag Kit Bag comes complete with shoulder straps. Crag Kit Bag: B L EQUIPMENT HOLDALL The 35L holdall is a standard simple design with a single zip closure with reinforced carrying handles. The bag is made from the same high quality material as our rope bags and equipment backpack. The holdall is available in six different colours, blue being standard. 35L Holdall: B L EQUIPMENT HOLDALL The 75L equipment holdall has been designed for rope access and rescue personnel to carry their individual equipment and for those wishing to pack team equipment into one bag. The twin zip flap lid allows the user to access all areas of the bag with ease. The bag has two carrying strap handles that are reinforced around the base of the bag, two drag handles at each end that can be used for hauling vertically when required and two padded shoulder carrying straps. 75L Holdall: B0019 BAGS ROPE LEG BAG EQUIPMENT BAG EQUIPMENT POUCH BOLT BAG The Leg Rope Bag has been designed looking at slight modifications to the standard to enhance the fit and securing system. Made from heavy duty black cordura nylon with velcro leg securing straps, foot loop/stirrup strap and a hand carry strap which will allow the user to clip the bag onto their harness if required. The Equipment Bag is a multipurpose draw string bag made from heavy duty cordura nylon. The bag has an adjustable shoulder strap, drain hole, and a steel spring hook so you can attach it to other equipment and gear loops. Our Equipment Pouches come in three sizes and are made from heavy duty cordura nylon. The smallest is mainly used as a harness pouch, the other two for equipment storage within your equipment bag. They have velcro belt loops that can be used to strap them on your carrying bag or back pack. The Bolt Bag is made from heavy duty hard wearing materials. It has a velcro flap lid, two belt loops that can be threaded onto a waist belt on your harness and two drain holes in the base. It has a comfortable rope capacity of 40metres of 11mm rope. Rope Leg Bag: B0014 Equipment Bag: B0016SARBK Sizes: Sizes: Medium Sizes: Large Small - Height 15cm x Width 9cm x Depth 5cm Med - Height 20cm x Width 16cm x Depth 7cm Large - Height 23cm x Width 18cm x Depth 7cm Height: 27cm Width: 23cm Depth: 7cm Weight: 472g Height: 34cm Width: 23cm Depth: 7cm Weight: 558g Small: B0021 Medium: B0024 Large: B0025 Medium: B0027 Large: B

30 ROPE 11mm STANDARD LOW STRETCH ROPE EN1891-A: mm RESCUE & ACCESS ROPE EN1891-A:1998 Our Low Stretch Rope is exceptionally appealing because of its low weight and high breaking strength. Due to the high strength and the low danger of cracking, SAR ropes are the right choice for many different applications. The high-twist 32-strand mantle braid provides for high dirt resistance, better grip and high abrasion protection. The 11mm Rescue & Access Tactical Rope has been developed to withstand heavy loads for e.g. winches, dirt and climatic influences. The rope is extremely robust and compact and also soft in handling making it ideal for tactical intervention and rescue. The rope has a tensile strength of 32kN. ROPE Diameter: 11mm Material: Low stretch nylon Outer plait (sheath): 16 Outer braids: 32 Inner core: 14 Static strength: 32kN Static strength fig 8 knot: 18kN Static strength fig 10 knot: 22kN Elongation: 3-5% Free cutting and labelling service on orders. Rope can be cut up to 200m on standard orders and 700m on special request. Diameter: 11mm Material: Low stretch nylon Outer plait (sheath): 16 Outer braids: 32 Inner core: 14 Static strength: 32kN Static strength fig 8 knot: 18kN Static strength fig 10 knot: 22kN Elongation: 3-5% Free cutting and labelling service on orders. Rope can be cut up to 200m on standard orders and 700m on special request. Diameter: 10.6mm Material: Low Stretch Nylon Outer Plait (Sheath): 32 Outer Braids: 64 Inner Core: 16 Static strength: 34kN Static strength fig 8 knot: 15kN 11mm Low Stretch Rope: RR mm LOW STRETCH ROPE EN1891-A:1998 The 10.6mm Low Stretch Rope has been developed to withstand heavy loads for e.g. winches, dirt and climatic influences. The rope is extremely robust and compact and also soft in handling making it ideal for tactical intervention and rescue. The rope has a tensile strength of 34kN. Free cutting and labelling service on orders Rope can be cut up to 200m on standard orders and 700m on special request 10.6mm Rope: RR002W White with red fleck Rope: RR002 Black Rope: RR002B NSN: ACCESSORY CORD EN564:2014 The Prusik cord is made of high grade polyester and is used for Prusik slings and for universal applications. The high twist 32 strand mantle braid makes the accessory cord immune to dirt and provides for ergonomic handling and high abrasion resistance. High quality manufacturing provides for high strength and a low danger of cracking. High-grade polyester High-twist 32-strand mantle braid Slip-proof, dirt-resistant, abrasion-resistant 6mm and 8mm Minimum breaking strength 6mm Cord 940daN Minimum breaking strength 8mm Cord 1400daN 6mm Cord: RR012 8mm Cord: RR

31 ROPE DOGS Rope Dogs are a soft type of rope clamp used in preference to mechanical devices where some types of rope clamp will grip the rope until the rope sheath or mantle will rip or tear. The rope dog will slip, therefore being kinder to the rope it is attached to. This makes the Rope Dog ideal for tensioning systems where overloading would cause a system failure. The Rope Dog can also be off loaded and re-loaded whilst under tension. Our Rope Dogs are manufactured using 11mm nylon rope. This makes it ideal for use with a variety of ropes from mm in diameter. Correct loading of the Rope Dog is vitally important, if loaded too loose it will slip at lower loads than if loaded correctly. ROPE PROTECTORS Our heavy duty Rope Protector is made from high quality polyester. They are extra thick giving more protection over sharp edges than the standard Rope Protectors. Our standard Rope Protectors are made from PVC reinforced polyester sheet material available in blue, red, black or yellow. On running ropes both the above can glaze due to friction. Heavy Duty Standard ROPE Sewn terminated eye Individual serial number per set Rope Dogs: RR025 Width: 15cm Length: 50cm Velcro fastener 4mm cord tab Colour: Red Width: 15cm Length: 70cm Velcro fastener 4mm cord tab Colours: Yellow or black Heavy Duty: RR020 Standard: RR021 STITCHED ROPE EYE EDGE BARS We can add a sewn eye termination on any length of 11mm rope in our range. The sewn termination has passed the test requirements of a sewn termination. All rope sewn terminations are marked up with a unique serial number, length, rope diameter, and year of manufacture. The Edge Bars have been designed as a caterpillar/edge roller style rack. Made in two segments of four 12.5mm dia. x 100mm stainless steel fixed bars. The two segments with two bars each give a total length of 32cm. Each segment is joined by two small steel maillons so they can be disconnected and used as two separate units if required, or others can be added. The sewn eye is also covered with a transparent protective sheath that helps protect the stitching against abrasion and the ingress of dirt but allows for the ease of inspection. All standard eyes can be fitted with a thimble to protect the rope. The full unit comes with in an Equipment Pouch that can be fitted to a belt or back pack straps. Static strength 22kN Stitched Rope Eye: RR015 Stainless steel bars Aluminium powder coated side plates Segment/unit length: 150mm Segment/unit width: 100mm Weight: inclusive of maillons 332gm per segment. Total weight inc. equipment pouch: 728g Edge Bars : RA015 KNOTTED NYLON EYE WITH HEATSHRINK FLAT PAD ROPE PROTECTOR This system shows a barrel knot used with a nylon eye and heat shrink and the karabiner is clipped into the loop of rope running through the rope slider. A fig 10 knot sealed in clear heat shrink can also be used and has a higher tensile strength than the barrel knot and the standard figure of eight knot. The figure of 10 knot will on most 10.5mm and 11mm kernmantle ropes hold a static load of 22kN for three minutes as required by EN353-2 back-up safety devices on flexible line. This Rope Protector is a two sided multi use rope protector. One side is made using heavy duty polyester webbing for use with static ropes and the other side is canvas for use with running ropes. Sandwiched in between is 6mm foam for extra padding. The Rope Protector can also be wrapped around rope using the velcro fastener. Width: 30cm Length: 50cm Velcro fastener 4mm cord tab Knotted Nylon Eye With Heatshrink: RR014 Flat Pad Rope Protector: RR

32 STRETCHERS & ACCESSORIES EVAC BODY SPLINT We are always striving to keep at the forefront of development & design. As a result of this we have once again improved our EVAC body splint. The thickness of the lower outer skin has been increased to give more resistance to abrasion, whilst using a new lightweight material on the upper skin in order to maintain the overall weight of the item. We have also changed the head strap to give two fitting systems to give a firmer head restraint. The EVAC has a width of 68cm across both the shoulder and hip areas and is 205cm long, giving more security and protection to the casualty. It has six horizontal lifting loops, three down each side, positioned along the main trunk/torso of the casualty. All the main casualty securing cross straps are of 50mm webbing with adjustable clip buckles. It has an integral body harness made from 25mm web with crutch padding and adjustable foot support with padding for extra security and to stop body slip when in a vertical or angular mode of lift. STRETCHERS & ACCESSORIES The two main vertical lifting loops are positioned at the shoulder which gives a true vertical lifting position for the casualty. The head section can be formed into a cone to disperse debris when dragging through confined spaces. The strap holding the Body Splint in position when rolled has a fitted pad and can be used for a head restraint by threading it around the outer loops on the coned area. It can also be used as a lifting mat without the use of the straps. Two people can transfer a casualty from one flat area to another keeping the casualty in a horizontal mode. Width: 68cm Length: 205cm Packed size inc. bag: 75 x 30cm Weight: 7.2kg The EVAC stretcher conforms to EC Declaration Of Conformity 93/42/EEC concerning medical devices. Article 11 (5) and annex VII Class 1 devices. The lower outer material is made from orange flame retardant, heavy duty PVC reinforced with nylon. The inner and bag are made from standard PVC reinforced with nylon. EVAC Splint: ST

33 ALPINE LITE STRETCHER ALPINE STEEL STRETCHER The Alpine Lite stretchers have been designed with the ever growing population in mind. It is slightly larger all round and the section from the shoulders to the hips has been made parallel and the length has been increased by 10cm. The flat bed style of the Alpine lite stretchers gives excellent security for spinal injuries and makes the loading of the casualty much better than a basket type stretcher, allowing far more casualty care. All versions of the Alpine stretcher fold in half, ski to ski, to facilitate easy backpacking by one person, to reduce bulk on the carriers back and for economical storage. When the stretcher is opened to receive a casualty it is not reliant on the side locks to remain secure when in the horizontal position, however the locks are required when being used for vertical lifting, when sliding/sledging over edges or rough terrain. The mountain rescue (MR) stretcher has a ski pan set between the head end skis for ease of sliding over rough terrain and snow, but more importantly to protect the casualty s back from rocks etc. Also the ski sections have an added high grade polyethylene ski fixed to them as a protection for the alloy over rock, gravel or any other hard abrasive surface. Alpine CR Lite The stretcher can be split in 2, if required for long carries into casualty Alpine CR sites but due to the lightness of the stretcher this is not always necessary. Weight of stretcher: 11kg Lifting straps: 1.2M kg Length open: 210cm Length folded: 105cm Max width: 60cm Runner depth: 9cm Stretcher depth: 12cm Powder Coated Silver Metallic Stretcher: 12.45kg Handles: 2.45kg Lifting straps: 2m kg Length open: 210cm Length folded: 105cm Max width: 60cm Runner depth 9cm Stretcher depth: 12cm Powder Coated Silver Metallic Alpine CR Lite (Civil Rescue) REF: ST001L Alpine MR Lite (Mountain Rescue) REF : ST002L Both the MR & CR stretcher come with casualty securing straps and lifting straps, (2 metre straps for the MR, 1.2 metre straps for the CR) and these may be used for lifting, winching, carrying, sledging or as pulling straps. The Alpine stretchers have been designed with the ever growing population in mind. It is slightly larger all round as the section from the shoulders to the hips has been made parallel and the length has been increased by 10cm. The flat bed style of the Alpine stretchers gives excellent security for spinal injuries and makes the loading of the casualty much better than a basket type stretcher, allowing far more casualty care. All versions of the Alpine stretcher fold in half ski to ski to facilitate easy backpacking by one person, to reduce bulk on the carriers back and for economical storage. When the stretcher is opened to receive a casualty it is not reliant on the side locks to remain secure when in the horizontal position, however the locks are required when being used for vertical lifting, when sliding/sledging over edges or rough terrain. The mountain rescue (MR) stretcher has a ski pan set between the head end skis for ease of sliding over rough terrain and snow but more importantly to protect the casualty s back from rocks etc. The stretcher can be split in 2, if required for long carries into casualty sites but due to the lightness of the stretcher this is not always necessary. Weight of stretcher: 13.45kg Weight of lifting straps: 1.75kg Length open: 2.1m Length folded: 1.05m Max width: 60cm Runner depth: 7cm Alpine MR Lite The stretcher comes with storage bag that has a single padded shoulder carrying strap and outside pouch for inspection record card. Alpine MR Carrying handles can be fitted to the stretcher, and they come as standard on the MR stretcher. Both accept the fitting of the stretcher wheel and head protection canopy. These must be ordered separately. The Stretchers Conform To: EC Declaration Of Conformity 93/42/EEC concerning medical devices. Article 11 (5) and annex VII Class 1 devices. The stretcher has been lifted by the RAF in exercise with the Oldham Mountain Rescue Team and found to be no different in handling to that of the steel version. Weight of stretcher: 15.02kg Weight of handles: 3.42kg Weight of Lifting straps: 1.80kg Length open: 2.1m Length folded: 1.05m Max width: 60cm Runner depth 7cm Alpine CR (Civil Rescue) REF: ST001 Alpine MR (Mountain Rescue) REF : ST002 Both the MR & CR stretcher come with casualty securing straps and lifting straps, (2 metre straps for the MR, 1.2 metre straps for the CR) and these may be used for lifting, winching, carrying, sledging or as pulling straps. The stretcher comes with storage bag that has a single padded shoulder carrying strap and outside pouch for inspection record card. Carrying handles can be fitted to the stretcher, and they come as standard with the MR stretcher. Both accept the fitting of the stretcher wheel and head protection canopy. These must be ordered separately. The Stretchers Conform To: EC Declaration Of Conformity 93/42/EEC concerning medical devices. Article 11 (5) and annex VII Class 1 devices. STRETCHERS & ACCESSORIES 64 65

34 ALPINE STRETCHER WHEEL The Stretcher wheel frame has been designed to be assembled quickly and easily by just slotting the foot end forks into the main front forks. The frame connects onto the stretcher bed frame in four places. The angle of the frame down to the wheel puts all the downward force onto the wheel axle as is normal with a bike. ALPINE STRETCHER HANDLES Our stretcher handles have been redesigned to improve the fitting system. They are now fitted using a screw making it easier to fit and to give more security. Adaptation kits can be bought to bring the older stretcher handles in line with the latest development. Steel Stretcher Wheel (Red): ST004 Lite Stretcher Wheel (Grey): ST004L Steel Stretcher Handles (Red): ST014 Lite Stretcher Handles (Grey): ST014L ADJUSTABLE STRETCHER LIFTING SLINGS The Adjustable Stretcher Lifting Slings have been designed for rescue, therefore are not (PPE) personal protective equipment. They are adjustable lifting slings for use with stretchers in mountaineering, industrial rescue and helicopter winching. They can also be used for lifting and lowering in both horizontal and vertical positions. The Adjustable Lifting Slings have been approved for lift by RAF SAR Force UK & Bristow UK Search and Rescue Tensile Strength of each Strap: 11kN 2 Straps vertical lift: 22kN. 4 Straps horizontal lift: 44kN All connections using Maillons EN362:05/Q & EN12275 Weight: 1.4kg (1.2m lifting slings) BASKET STRETCHER LIFTING SLINGS The Basket Stretcher Lifting Slings have been designed for rescue, therefore are not (PPE) personal protective equipment. They are adjustable in length with large connectors for use with stretchers in mountaineering, industrial rescue and helicopter winching. They can also be used for lifting and lowering in both horizontal and vertical positions. Tensile Strength of each Strap: 11kN 2 Straps vertical lift: 22kN 4 Straps horizontal lift: 44kN Central connections: 3 Maillons EN362:05/Q & EN Stretcher Connection: Extra large karabiner 40kN EN362 with a 48mm gate opening Weight: 2.5kg Alpine CR 1.2m Adjustable Stretcher Lifting Slings: ST007 Alpine MR 2m Adjustable Stretcher Lifting Slings: ST m Basket stretcher Lifting Slings: ST008 STRETCHERS & ACCESSORIES EVAC LIFTING SLINGS STRETCHER LIFTING BRIDAL The EVAC Lifting Slings have been designed for rescue and are made up of items conforming to the relevant standards for (PPE) personal protective equipment. They are for use with stretchers in mountaineering, industrial rescue and helicopter winching. The complete set is made up of 4 x 60cm twin eye slings, 4 steel oval karabiners and 2 medium and 1 large delta maillons. Each of the items can be used independently if needed. They come complete with their own equipment storage pouch. The Stretcher Lifting Bridal has been designed for rescue, therefore are not (PPE) personal protective equipment. They are adjustable liftings slings for use with stretchers in mountaineering, industrial rescue and helicopter winching. They can also be used for lifting and lowering in both horizontal and vertical positions. Standards conforming to: Slings EN354, EN566, & EN795-B. Karabiner EN362 and Maillons - EN362:05/Q & EN12275 Max length of each leg including connectors:73cm Weight complete with connectors: 1.2kg Weight of bag: 58g Standard Colour: Orange EVAC Lifting Sling: ST021 Tensile Strength of each Strap: 11kN 2 Strap vertical lift: 22kN 4 straps horizontal lift: 44kN Central connections: 3 x Maillons EN362:05/Q & EN Stretcher Connection: Extra large karabiner 40kN EN362 with a 48mm gate opening Weight: 2.5kg Stretcher Lifting Bridal: ST

35 QUADPOD & WINCH QUADPOD & WINCH QUADPOD EN795-B The Quadpod is a multi adjustable portable anchor. It was designed to supersede the tripod, design to provide more stability and reliability during a rescue situation. It is in use all over the world by many rescue organisations, military units and the UK coastguard. The Quadpod can be used in many modes and gives greater access to areas that tripods or other devices cannot access. The head of the Quadpod has multi-connection points, and up to two legs can be disconnected for special uses or transportation. It has been found that the need to have a 2.3m - 2.5m centre height for confined space rescue is not necessary when using the Quadpod. The extraction of casualties in body splints/stretchers once partially extracted can be brought out the rest of the way at an angle giving more casualty care, room and stability. It comes complete with leg straps and a storage bag. These products can also be purchased separately. Materials & Coatings: Legs: Aluminium powder coated Head: Stainless steel powder coated Eye bolts & pins: Stainless steel & mild steel nickel plated Feet: Flexible studded rubber Straps: Polyester webbing, hooks steel nickel plated Leg Adjustment: 10 holes on each leg Max height as standard pyramid: 2m Packed size in bag: 1.2m x 17cm dia Standard: EN795-B WLL in a standard pyramid shape 500kg Weight: Quadpod: 12.8kg Leg straps: 1.0kg Quadpod: QU

36 QUADPOD & WINCH WINCH QUADPOD BAG QUAD LEG STRAPS The Winch has been made to fit in various positions on our Quadpod. It can also be used separately from the Quadpod, however this would require training for the users. Our winch can be used with kernmantle rope size between mm. The lifting load is dependent on the type of rope and the number of turns on the capstan before fitting into the self tailing guide. The Quadpod bag comes as standard when ordering the Quadpod. The bag has an adjustable strap for carrying over the shoulder and has two storage compartments for straps and documents. The Quad leg straps come as standard when ordering the Quadpod. The straps are light to carry and pack into the bags side pouch. They are extremely fast to connect and have very fine adjustment. As a guide, using 11mm rope with two turns on the capstan, then a third turn placed onto the self tailing guide and into the gripping flange, the maximum load it will take is approx. 250kg. At this load the rope will start to slip in the gripping flange so as not to over load the system. One person can lift or lower two people easily. There should always be a safety back-up system in place and a rope lock on the main rope i.e. the Rocker. We strongly advise that users be trained in its many uses and learn about its physical strengths and weaknesses. Two Speeds: 3 1 & 9 1. Separate handle Weight: 12.8kg Complete with storage bag Materials: Winch: Stainless steel and brass Bracket: High grade alloy, pins in plated mild steel Heavy duty PVC Side pouch for leg straps/documentation Colours: Blue or Black Materials: Polyester webbing, mild steel plated buckle Plated hardened steel hooks Colours: Black or Orange Weight: 1kg per set of 4 Strength: 300kg each strap Winch: QW001 Quadpod Bag: QU003 Quad Straps: QU

37 ACCESSORIES ACCESSORIES INDUSTRIAL & CLIMBING HELMETS EN397:2012 or EN12492:2012 GROUND SPIDER Industrial Helmet - EN397 On the Industrial helmet the ventilation holes are closed. The chinstrap is designed to open in case of collision: opening at 25 dan (According to European standard EN397 for safety helmets). The helmet meets the following optional requirements: lateral deformation and low temperature use (-30 C). The helmet is fitted with clips for fixing a headlamp. It is suitable for all types of work at height and for industrial use. Mountaineering Helmet - EN12492 This helmet has a new Up/Down adjustable size system for better fitting and comfort. Headband covered with allergenic textile. The helmet is fitted with clips for fixing a headlamp. This helmet has been designed for canyoning, mountaineering, ice climbing, caving & sport climbing. It is also suitable for school camps and adventure parks. The Ground Spider is made from a high specification alloy bar and each spike inter-folds along the main bar for storage and stops the spike from damaging other equipment or causing injury. The Ground Spider comes with its own storage bag made from heavy duty nylon cordura. Each leg is linked using a 60mm x 18cm round sling and a medium delta maillon both of which conform to the relevant EN standards. All the items are in black and pack away to an approximate size of 40cm long and 7cm in diameter, tapering to 4cm. There is no formal test procedure or standard for this item, however it has been load tested to 15kN and it held for three minutes as required in most EN standards. Users must be competent and trained and fully understand how it holds on different types of ground. EN397 EN12492 Material: ABS (Acrylonitrile Butadiene Styrene). External shell: Advanced thermo material (ABS) Internal shell: High density polystyrene (EPS) Size: unisize 54/62cm Weight: 400g Material: ABS (Acrylonitrile Butadiene Styrene). External shell: advanced thermo material (ABS) Internal shell: High density polystyrene (EPS) Size: unisize 54/62cm Weight: 395g Material: Main bars, aluminium powder coated Sling: Superweb polyester Maillon: Steel plated Bag: Nylon cordura Colour: Black Leg length: 3 x 33cm and 2 x 26cm Spike length: 15cm Sling: 60cm Circ. x 18mm superweb - EN354, EN566 & EN795-B Delta maillon: 8mm EN362:05/Q & Weight: 832g Strength: Lab test only, 15kN Industrial Helmet: HP004IND Mountaineering Helmet: HP004 Ground Spider: RS

38 KNIFE & POUCH New Design! ACCESS SEAT ROPE GLOVES LIFTING BRIDAL The knife blade is stainless steel and is razor sharp, it easily cuts an 11mm rope even if it is not loaded. The knife is designed so you select the rope you want to cut to insert it into the opening. The blade is protected to prevent accidental cutting when it hangs on the pouch. The knife is connected to the pouch with a 3mm elastic safety cord. The pouch has a press stud lid and a velcro belt loop to enable you to fix it to your waist belt without the need for threading. Knife & Pouch: RS006 Our access seat has been designed to give the user extra comfort. It connects to the karabiner attached to the waist belay point on your harness. With adjustable straps so the load is taken from the harness. It has two gear rings on each side. Manufactured from heavy duty PVC reinforced polyester and strong polyester straps with a 12mm plastic base with closed cell foam padding. Easy to fold away flat when not in use. Access Seat: RS009 Our technical rope gloves have been designed with the user in mind and not just as an abseiling glove. Normal abseiling gloves are thick, stiff, bulky and heavy. Our glove can be worn and used as a general purpose glove. With its cut off thumb and first finger it can be used on jobs that require fingertip control. Sizes: Medium Large XX Large Our harness lifting bridle has been designed for the use of lifting and lowering personnel from confined spaces when used in conjunction with an over the shoulder fall arrest harness. The lifting bridle is made up of individual parts that comply to their own standards and the main body is made of formed 4mm stainless steel covered in a high grade tubular webbing. Slings conform to EN354 EN566 and EN795-B Delta maillon: 8mm EN362:04/Q & EN12275 Width: 36cm Height: 45cm Weight: 1.1kg ACCESSORIES Rope Gloves: RS011 Lifting Bridal: RS002 RIGGING PLATES FOOT LOOPS 5 RUNG ETRIER The 5 Rung Etrier is made from our 18mm superweb. It comes with its own storage bag that can be connected to your harness when not in use. Rigging plates were developed for putting multiple connections into one point or anchor. They are to help clean up a system of multi connections and to help stop twist from karabiner to karabiner. They are increasing in popularity with Fire & Rescue rope teams, available in three sizes: small, medium, and large. Small Rigging Plate Material: Anodised high strength aircraft alloy Minimum breaking load: 36kN Weight: 93g Hole: 20mm Length: 91mm Width: 84mm Medium Rigging Plate Material: Anodised high strength aircraft alloy Minimum breaking load: 40kN Weight: 219g Hole: 20mm Length: 160mm Width: 100mm Large Rigging Plate Material: Anodised high strength aircraft alloy Minimum breaking load: 45kN Weight: 442g Hole: 20mm Length: 249mm Width: 150mm Small Rigging Plate: RS015 Medium Rigging Plate: RS016 Large Rigging Plate: RS017 Our Single & Twin Foot Loops are fully adjustable using an alloy grip tight buckle, 25mm hard wearing polyester web and a reinforced foot loop. Max working length: 175cm Min working length: 45cm Weight of single: 154g Weight of double: 194g Single Foot Loop: RS012 Twin Foot Loop: RS013 This is not for use as PPE (Personal Protective Equipment) as there is no standard for this type of product. You must always use a separate sling or rope as your safety. Working Length: 170cm Weight: 188g Karabiner NOT included Etrier: RS

39 PERSONALISED PRODUCTS At SAR we are committed to making products that will fit all your needs, but if you need something to suit your specific needs we will happily design and manufacture products bespoke to you. Bespoke products can be designed to include any customisation that you require. This can include your own company branding & colours. If you would like a product designing for you, or would like an existing product personalised for you. Please contact us by ing sales@sar-products.com or give us a call on BESPOKE PRODUCTS We are able to personalise a selection of our bags. These can be printed with your company s logo or any other design you require. These designs can be printed in a wide choice of colours

40 SAR Products - Terms & Conditions Good design is something to be proud of. Specialist Access & Rescue Products Ltd. - Terms and Conditions 1. (i) Goods are supplied subject to these terms and conditions which override any conditions of sale stipulated by the Buyer, unless specifically agreed in writing by Specialist Access & Rescue Products Ltd a company registered in England and Wales with company number and whose registered office is at 18 Fernthorpe Avenue, Uppermill, Oldham OL3 6EA ( SAR ). Buyer means any person or entity who places an order for Goods with SAR. Specialist Access & Rescue Products Ltd. (ii) Goods means those Goods supplied by SAR and ordered by the Buyer. No waiver or variation by SAR of any terms or of any breach of a contract committed by the Buyer shall be considered as a waiver or variation of any subsequent contract terms or any subsequent breach. (iii) Goods supplied for re-sale by SAR are only for sale by the Buyer from their own premises, unless otherwise agreed. (iv) SAR reserves the right to amend specifications and or prices as necessary and to decline to supply. (v) SAR expressly warrants that the Goods supplied by it comply with relevant specifications which accompany those Goods. No other term, condition, warranty or representation (whether express or implied by statute or usage) as to the nature, quality or fitness of the Goods to their conformity with any description or sample is given by SAR and the Buyer. (vi) Only a Director of SAR may make representations on behalf of SAR in respect of matters to which this contract relates, and such representations must be written to bind SAR. No other person is authorised by SAR to make representations on its behalf. 2. All prices quoted are exclusive of V.A.T. and other duties or taxes, unless otherwise specifically stated. 3. Orders will be despatched by SAR s method and choice of carrier, unless agreed otherwise prior to despatch by SAR. 4. (i) Where Goods are supplied on a pro-forma basis those Goods will be dispatched only upon receipt of cleared funds. When paying by cheque, please allow 5 working days for clearance. (ii) SAR will not offer any settlement discount on pro-forma orders. (iii) SAR reserves the right at any time to review any credit arrangements which it makes with any Buyer and to cancel such credit facilities without notice. 5. (i) Orders are placed by the Buyer however they are only contractually binding from the time of acceptance by SAR ( Orders ). Cancellations of Orders can only be accepted with prior written agreement from SAR. (ii) Cancellations received after dispatch will incur a handling charge. Goods are to be returned at the Buyer s expense and in the same condition as when despatched by SAR. (iii) Once accepted by SAR, an Order for any non-standard goods (meaning goods which have been manufactured to the Buyer s own instructions and which would not otherwise be manufactured by or on behalf of SAR) is binding and cannot be cancelled. (iv) Standard Goods returned (which will be subject to a handling charge) must be current model and packaged in re-salably condition and received in the same condition as when despatched by SAR. (v) The Buyer must accept the Goods even if delivered late. Time of delivery is not of the essence of the contract. If the contract is one to be delivered in installments, the failure to deliver one installment does not entitle the Buyer to terminate the contract. (vi) If the Buyer fails to take delivery of the Goods in accordance with the terms of this contract, SAR shall be entitled to terminate the contract with immediate effect. On termination, SAR may, in its discretion, exercise any of the following rights, either alone or in combination: (a) dispose of the goods as it thinks fit; (b) retain any deposit or part-payment made by the buyer; (c) recover damages from the Buyer in respect of any losses it suffers as a result of the Buyer s failure to take delivery, including, but not limited to, the profit it would have made had the Buyer performed its obligations, the costs of storage and disposal of the goods. 6.(i) Delivery dates given by SAR are a genuine forecast in the light of current conditions but are given without legal commitment and SAR accepts no liability in the event that it is unable to meet those dates. (ii) If events beyond SAR s reasonable control prevent SAR from delivering any Goods by the appropriate delivery date, such date shall be postponed for a reasonable period. Beyond such period SAR may without liability cancel this contract as regards such Goods. 7. SAR will endeavour to supply the exact quantities of Goods ordered in the specified number of consignments. 8. SAR reserves the right to cancel balance of Orders. The Buyer will pay for the actual quantities of Goods delivered even though part of the consignment may still be outstanding. 9. Non-receipt of goods for delivery in the U.K. must be notified in writing to SAR within 5 working days of receiving an invoice for such a delivery. 10. (i) Errors and shortages must be notified in writing to SAR within 5 working days of receipt of goods. (ii) SAR shall, as its option, replace, repair or refund the purchase price of any Goods proved to its reasonable satisfaction to have been delivered short or to be defective provided in each case: (a) The Buyer as soon as reasonably practicable and in no event later than 5 working days of delivery informs SAR of the alleged short delivery or defect; and (b) The Buyer has paid for the Goods in full; and (c) No authorised repairs or alterations have been made to the defective Goods; and (d) The Goods have been maintained and used with reasonable care and in accordance with the directions or standard industry procedure and the Buyer provides full information and documentation to verify compliance with these conditions; and (e) If the Goods have been incorporated into other goods, the nature of those goods is stated; and (f) The defect derives solely from the design, work or materials of SAR and was not caused wholly or partly as a result of delivery to the Buyers or any third party s work, material or design. (iii) Consignments are packed to the highest standard. Damaged goods must be refused on delivery and the dispatch note marked damaged in transit. To ensure the dispatch of a replacement consignment the Buyer must advise SAR in writing of the damaged consignment within 5 working days of the damaged delivery. 11. (i) Ownership in the Goods remains with SAR until SAR has received cleared funds in full of the price of all the Goods supplied at any time by SAR to the Buyer as well as any other payment due under any other subsisting contract between SAR and the Buyer. (ii) The Buyer holds all goods owned by SAR as SAR s fiduciary agent and bailee. (iii) All risk in the goods passes to the Buyer upon delivery. The Buyer must take all necessary protection of the goods including insurance until full payment is received. (iv) Until full payment as defined in clause 22 (i) has been received at SAR, the Buyer will hold the goods supplied on unpaid invoices in such a way that in the event of prior resale SAR shall be entitled to the proceeds of such a sale. (v) The Buyer shall if so requested by SAR store all goods not paid for in full so that they are clearly shown to be the property of SAR. The Buyer must maintain records of the location of the goods so they remain easily identifiable. (vi) Goods are supplied subject to the understanding that the credit Buyer authorises SAR to enter the Buyer s premises in order to repossess goods for which full payment has not been received and all costs and expenses reasonably incurred by SAR shall be paid by the Buyer. 12. (i) SAR agrees to indemnify the Buyer: (a) against liability for personal injury or death directly attributable to the negligence of SAR; and (b) against physical damaged caused to the Buyer s property directly arising from the negligence of SAR in connection with the supply of the Goods. (ii) SAR s total indemnity to the Buyer under the indemnity contained above shall not exceed the price at which the Goods were sold to the Buyer for one or more related claims. (iii) Subject to the indemnity given above, SAR is not liable to the Buyer for any loss, expense or damage of any kind (direct, indirect, financial or consequential and whether arising from negligence or otherwise) arising from the supply, purported supply, failure to supply or from the Buyer s use, possession or re-sale of the Goods. (iv) No officer or employee of SAR is liable to the Buyer in any circumstances for any loss, expense or damage of any kind (direct, indirect, financial or consequential and whether arising from negligence or otherwise) arising from any act or omission of this during the performance of this employment or other duties. 13. All copyright, patent, trade secret and other proprietary and intellectual property rights in the Goods and all information which SAR may provide to the Buyer or its agent shall (as between the parties) at all times remain vested in SAR and the Buyer does not acquire any intellectual property rights or licence relating to the Goods and may not copy or imitate the Goods. 14. In addition to any other right of termination, SAR may terminate this contract if: (i) the Buyer defaults in the payments on its due date of any sum under this contract or commits any continuing or serious breach of this contract and fails to remedy that breach (if capable of remedy) within 10 working days of SAR s notice to do so; and (ii) any of the following events occurs: (i) distress or execution is levied against any of the Buyer s assets or a receiver is appointed with respect to any of the Buyer s assets; or (ii) a petition is presented for the winding up of or for an administration order to be made in relation to the Buyer or a resolution passed for the Buyer s winding up; or (iii) the Buyer suspends or threatens to suspend payment of its debts or is deemed unable to pay its debts for the purposes of Section 123 Insolvency Act (iv) at any time SAR has reasonable grounds to believe that any of the events mentioned in (i) and (ii) above is likely to happen within a period of three months thereafter. 15. On termination of this contract for any reason: (i)sar shall be discharged from any further liability to perform under the contract; (ii) the Buyer shall pay SAR on demand for all work performed by SAR for the Buyer prior to termination; and (iii) SAR is granted an irrevocable licence to enter the Buyer s premises to recover any goods or materials which are SAR s property. 16. The contract shall be governed by English law and be subject to the jurisdiction of the English courts. 17. (i) Demonstration and loan equipment is supplied solely on the understanding that the prospective customer takes full responsibility for its use. (ii) Supply of demonstration and load equipment can only be made if the prospective customer confirms in writing their full acceptance of responsibility. 18. Please note; climbing, mountaineering, caving, rescue, work at height and similar or associated activities can be hazardous and carry dangers which may lead to serious injury or even death. Goods to be used in these disciplines must only be used by competent and informed persons who understand and accept the risks involved. An apprenticeship in appropriate techniques and safety measures is the responsibility of the user, who assumes responsibility for all risks and damages which may arise from the use of such equipment. 19. It is the responsibility of the Buyer to ensure that all technical data and instruction provided with the product by SAR is supplied to the end user. 20. (i) Payment shall be due by the Buyer in full and cleared funds to SAR 30 days from the date of invoice. (ii) Every time a cheque, standing order or banker s order fails to clear the Buyer s bank on presentation we will separately surcharge the Buyer s account. (iii) SAR understands and reserves the right to exercise our statutory right to claim interest and compensation for debt recovery costs under the Late Payment of Commercial Debts (Interest) Act 1998 (as amended) in the event that SAR is not paid according to agreed credit terms. (iv) If payment is received without instructions as to which invoice it should be matched against, it will be matched against the oldest invoice(s) on the account. (v) SAR expects customers to whom a credit note has been issued to claim the credit within 6 months. Where an account has been dormant for more than 6 months SAR will write off any credit notes and reserve the right to make an administrative charge in respect of any subsequent claim on them. (vi) Accounts that lie dormant for a minimum of 12 months will be closed. SAR reserves the right to make an administration charge for any subsequent reinstatement. 21. (i) In the event of any claim under warranty, guarantee or consumer protection law, SAR requires that Goods be returned to SAR for inspection. (ii) In order to minimise delay for the customer, SAR aims to inspect goods within 3 working days of receipt at SAR. (iii) Where goods are faulty and cannot, in SAR s opinion, be repaired or replaced, a credit note will be issued to the original value of the faulty goods. (iv) SAR will not recognise as valid debit notes generated by the Buyer. 22. (i) SAR shall not be liable for any claims in respect of any Goods which have been misused, permitted or allowed to fall into a bad state of condition or repair and have not been maintained in accordance with the manufacturer s instructions. 23. (i) Should any provision of this contract become illegal or void for any reason, the validity of the remaining provisions shall not be affected and the parties shall enter into negotiations in good faith to find a replacement for the provision which is of similar economic effect. 24. All notices, requests, claims, demands and other communications hereunder shall be in writing, Such notices shall be given: (i) By delivery in person (ii) By a nationally recognised next day courier service, (iii) By first class, registered or certified mail, postage prepaid, (iv) By facsimile or (v) By electronic mail to the address as either party may specify in writing. Notices so given shall be effective upon (i) receipt by the party to which notice is given, or (ii) on the fifth (5th) day following mailing, whichever occurs first. 25. If any provision or provisions of this Agreement shall be held to be invalid, illegal, unenforceable or in conflict with the law of any jurisdiction, the validity, legality and enforceability of the remaining provisions shall not in any way be affected or impaired thereby. T: +44 (0) E: sales@sar-products.com W: Sarena House, Vulcan Street, Oldham, OL1 4LQ 78 79

41 Specialist Access & Rescue Products Ltd. Sarena House, Vulcan Street, Oldham, OL1 4LQ United Kingdom T: +44 (0) E: W: