PCB accessories. PCB handle C. PCB retainer C. Order Information. Note. Order Information
|
|
|
- Drusilla Gibson
- 5 years ago
- Views:
Transcription
1 PCB accessories PCB handle C PCB accessoriesmain CataloguePart number in bold face type: ready for despatch within 2 working dayspart number in normal type: ready for despatch within 0 working days For europacpro, multipacpro, ratiopacpro, propacpro and compacpro Mounts behind front panel Insertion and extraction Can be labelled In accordance with IEC BPA45909 Item Description Material Colour Qty/PU Part no. PCB handle C PBT, UL 94 V-0 red Identification Polyester film, white/ strip ( sheet self-adhesive matt = 438 pieces) Minimum spacing of guide rail 3 HP for board thickness.6 mm Please order PCB retainer C separately BPA4590 BPA4590 PCB retainer C For europacpro, multipacpro, ratiopacpro, propacpro and compacpro Can also be used without PCB handle Application on top and bottom horizontal rail with "accessory" type guide rail Item Description Material Colour Qty/PU Part no. PCB retainer C PBT, UL 94 V-0 red Minimum spacing of guide rail 3 HP Cannot be used with propac, compac, inpac cases 7.02 SCHROFF PRODUCT CATALOG E 05/206 ELECTRONICS PROTECTION
2 PCB accessories PCB handle B For bolting or riveting to.6 mm PCBs (top and bottom) Extraction function only Can be labelled B42729 Item Description Material Colour Qty/PU Part no. PCB handle, PBT, UL 94 V-0 red bolt-on (SPQ 0) a PCB handle for PBT, UL 94 V-0 red rivet fitting (SPQ 0) Countersunk screw St, nickelplated, DIN a Tubular rivet Brass, DIN Indentification strip Polyester film, self-adhesive white SPQ (standard pack quantity): Part number includes, but delivery is exclusively made in standard pack quantity: Please order at least 0 pieces PCB handles or a multiple Can be used with PCB retainer B, B2, see page 7.04 BZB42725 BZA42724 PCB handle B2 For bolting to PCBs (.6 mm); can only be used on bottom horizontal rail Extraction function only Can be labelled BZA46427 Item Description Material Colour Qty/PU Part no. PCB handle PBT, UL 94 V-0 red (SPQ 0) Slotted 2 cheesehead St, nickel-plated screw, M2.5 6 SPQ (standard pack quantity): Part number includes, but delivery is exclusively made in standard pack quantity: Please order at least 0 pieces printed circuit board handles or a multiple Can be used with PCB retainer B, B2, see page 7.04 BZB42726 SCHROFF.PENTAIR.CO.UK Part number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 0 working days 7.03
3 PCB accessories PCB retainer B, B2 PCB accessories For fixing PCB Can also be used without PCB handle Application on top and bottom horizontal rail Suitable for PCB handles B and B2 Description Material Colour Qty/PU Part no. PCB retainer B, B2 PPO, UL 94 V-0 red Groove width 2 mm PCB handle, snap-on For board thickness.6 mm Item Description Material Colour Qty Part no. PCB handle, PPE, grey can be locked UL 94 V- (SPQ 0) PCB handle, can be locked PPE, UL 94 V- Transparent strips Item 3, mm, PU 00 pieces SPQ (standard pack quantity): Part number includes, but delivery is exclusively made in standard pack quantity: Please order at least 0 pieces PCB handles or a multiple red (SPQ 0) A326 PCB handle, can be bolted/riveted For board thickness.6 mm A4-302 Item Description Material Colour Qty Part no. PCB handle, PC yellow can be bolted/riveted (SPQ 0) PCB handle, can be bolted/riveted PC red (SPQ 0) PCB handle, can be bolted/riveted PC green (SPQ 0) Identification strip Item 2, carton, white, mm, sheet = 05 pieces Pozidrive panhead screw M2.5 8, St, nickel-plated, PU 00 pieces Hexagonal nut A 2.5, nickel-plated, PU 00 pieces Tubular rivet, form B (roundhead) B 2.5 x 0.25 x 5, St/brass, raw, DIN 7340, PU 00 pieces SPQ (standard pack quantity): Part number includes, but delivery is exclusively made in standard pack quantity: Please order at least 0 pieces PCB handles or a multiple 7.04 SCHROFF PRODUCT CATALOG E 05/206 ELECTRONICS PROTECTION
4 PCB accessories PCB pocket Accepts PCBs in euroboard format, mm For female connectors to EN (DIN 462) Delivery comprises (kit) Item Qty Description PCB pocket, PBT (P), grey, UL 94 V Retention bracket, St, 2 mm, nickel-plated 4 2 Cheesehead screw M2.5 6, St, nickel-plated 5 2 Cheesehead screw M4 2, St, nickel-plated Item Description Material Colour Qty/PU Part no. PCB pocket PBT (P) grey Retention bracket (DIN 462) LKA42605 Connector (item 2) see page.2 LKA42606 PCB strengthening (9 U) Protects large PCBs from bending Creates an additional crossbar (corresponding to IEEE recommendations, P 896, Nubus, Multibus II etc.) that links all connectors mecanically Fixing points match connectors to EN (DIN 462), types B, R, C and D LKA42609 Delivery comprises (kit) Item Qty Description PCB strengthening, Al extrusion, anodised, cut edges plain; separator, stainless steel, riveted on 2 6 Cheesehead screw M 2.5 2, St, nickel-plated 3 6 Washer 2.6, St, nickel-plated Description Height H Part no. mm For 9 U PCBs LKA42593 PCB covers PCB accessoriesmain CataloguePart number in bold face type: ready for despatch within 2 working dayspart number in normal type: ready for despatch within 0 working days Covers to protect solder side of board, see page SCHROFF.PENTAIR.CO.UK Part number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 0 working days 7.05
5 PCB accessories Individual components PCB support for static trapeziform handle Fixing parts for extractor handles in key form 2 Drill hole dimensions on PCB 4 / 4a 3 5 / 5a 5c / 5d 5b 5e 3 HE 6 HE bga43076 bga43077 bza46430 Fixing parts Item Required quantity Qty/PU Part no. 3 U 6 U PCB bracket 4 clearance holes for front panel/pcb fixing, 4 recesses for hexagon nuts; PBT, UL 94 V-0, red 5 2 (SPQ 0) ) PCB bracket 4 threads M2.5 for front panel/pcb fixing, PBT, UL 94 V-0, grey, 5a 2 (SPQ 0) ) AZA4577 PCB bracket Clearance hole for front panel fixing, with recess for hexagon nut, drill hole for self-tapping screw for PCB fixing, PBT, UL 94 V-0, grey, 5b 2 4 (SPQ 0) ) AZA4577 PCB bracket 2 threads M2.5 for front panel/pcb fixing, die-cast zinc, 5c 2 4 (SPQ 0) ) PCB bracket Thread M2.5 for front panel fixing, clearance hole for PCB fixing, die-cast zinc, 5d 2 4 ) (SPQ 0) PCB bracket 4 threads M2.5 for fixing front panel/pcb for recessed PCB mounting (20 mm), mounting depth mm, St, zinc-plated; not for europacpro, multipacpro, ratiopacpro, propacpro or compacpro, 5e 2 ) (SPQ 0) ) SPQ (standard pack quantity): Part number includes, but delivery is exclusively made in standard pack quantity (SPQ); please order at least the SPQ quantity or a multiple AZA SCHROFF PRODUCT CATALOG E 05/206 ELECTRONICS PROTECTION
6 Assembly parts Quick-release fasteners Sleeves Screws Cage nuts Tools Quick-release fasteners Vibration and shock proof /4 rotary lock with defined stop Detection of fastening position through slot position Delivery comprises Qty Description Locking pin, St, locking, Zn die-cast Press-in sleeve, POM Item Description Qty/PU Part no. With slotted head, grey With slotted head, black With knurled and slotted head, grey With knurled and slotted head, black Quick-release fasteners: mounting without threaded insert Sleeves Item Description Application Qty/PU Part no. pieces 2 Plastic sleeve, for unshielded PA, grey Plastic sleeve, PA, black Metal sleeve, brass, nickel-plated Metal sleeve, brass, nickel-plated Metal sleeve, brass, black Metal sleeves, stainless steel Metal sleeves, stainless steel for unshielded for shielded for shielded for shielded for shielded for shielded Accessories Pozidrive/slotted collar screw M2.5, St, nickel-plated, PU 00 pieces Pozidrive/slotted collar screw M2.5 x 2.3, St, nickel-plated, PU 00 pieces Metal sleeves must be pressed-in into Sleeve does not fit 2 HP wide Assembly parts SCHROFF.PENTAIR.CO.UK Part number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 0 working days 7.07
7 Collar screws St, nickel-plated M2.5 x St, zinc-plated, black M2.5 x Pozidrive/slotted collar screw Stainless steel, with slot M2.5 x St, nickel-plated M AZA46586 St, zinc-plated, black M Stainless steel M St, nickel-plated M Torx collar screw St, zinc-plated, black M AZA ,5 Brass, nickel-plated M ,5 2,3 Collar screw with knurled head Brass, nickel-plated M ,5 2,3 Brass, nickel-plated M ,5 Slotted collar screw with knurled head Brass, nickel-plated M SCHROFF PRODUCT CATALOG E 05/206 ELECTRONICS PROTECTION
8 Countersunk screws St, nickel-plated M Pozidrive countersunk screw St, nickel-plated M aza4582 St, zinc-plated M Torx countersunk screw St, zinc-plated M AZA46585 St, nickel-plated M St, nickel-plated M Raised Pozidrive countersunk screw St, zinc-plated, black M St, nickel-plated M St, zinc-plated, black M Torx countersunk screw, self-tapping St, zinc-plated Screws for plug-in units Description Qty/PU Part no. Slotted flathead screw, 6-32 UNC x SCHROFF.PENTAIR.CO.UK Part number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 0 working days 7.09
9 Panhead screws St, nickel-plated M St, nickel-plated M St, nickel-plated M Pozidrive panhead screw St, nickel-plated M St, nickel-plated M St, nickel-plated M St, zinc-plated M St, zinc-plated M St, nickel-plated M St, nickel-plated M St, nickel-plated M Torx panhead screw St, nickel-plated M St, zinc-plated M St, zinc-plated M St, zinc-plated M St, zinc-plated M AZA45940 Screw + securing washer (PA) St, nickel-plated M St, zinc-plated, black Torx panhead screw, self-tapping St, zinc-plated SCHROFF PRODUCT CATALOG E 05/206 ELECTRONICS PROTECTION
10 Grub screws Stainless steel M Grub screw St, nickel-plated M St, zinc-plated M Washers Plastic, PA Washer Plastic, PA 2.8 6, St, nickel-plated A2.7 DIN AZA4578 Shakeproof washer St, nickel-plated A AZA4580 Nuts Hexagon nut St, nickel-plated M AZA43239 Square nut St, nickel-plated M Square nut St, zinc-plated M AZA4592 Tubular rivet Tubular rivet, form B (roundhead) St/brass, raw B SCHROFF.PENTAIR.CO.UK Part number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 0 working days 7.
11 Assembly tools Description Application Dimension Qty/PU Part no. For M2.5 screw T Torx screwdriver For M4 screw T AZA45925 Assembly tool Exclusively to fix stainless steel EMC gaskets in horizontal rails aza45938 Assembly tool To fix stainless steel EMC gaskets on with lateral slot aza45937 Assembly tool to insert keying/coding pegs in guide rails is available on request 7.2 SCHROFF PRODUCT CATALOG E 05/206 ELECTRONICS PROTECTION
12 Measuring tape Measuring tape with cm, U-, HP-division (length 2 m) Plastic housing, metal measuring tape with automatic collection Description Qty/PU Part no. Measuring tape SCHROFF.PENTAIR.CO.UK Part number in bold face type: ready for despatch within 2 working days Part number in normal type: ready for despatch within 0 working days 7.3
K13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS
K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n
Technical information for hinges
451 452 Technical information for hinges In the tables on the following pages are listed a large range of hinge variations. Many more variations are possible if hinges with guide tabs are required i.e.
enclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets)
enclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets) Stainless steel and plastic enclosures for use in potentially explosive environments R Rittal system partners Perfect
Extension Platform. Base Platform. Crossover. Exit railing. Exit Railing
Base Platform Galvanized With metal grate and two brackets Railing on the long side and a face side Extension Platform Galvanized With metal grate and one bracket Railing on the long side with rail connection
SELF DRILLING/TAPPING SCREWS
Teks Self Drilling Screws A premium range of high performance self drilling fasteners from the originators of the Teks brand, these screws are available with full technical and after sales support. Consisting
Medium Voltage Switchgear. Installation Manual for Pressure Relief Ducts
Uniswitch Medium Voltage Switchgear Installation Manual for Pressure Relief Ducts TABLE OF CONTENTS 1 Summary... 1 2 Transportation and storage... 2 2.1 Condition on delivery... 2 2.2 Unpacking at installation
SCOUT DECK ANCHOR 3 1/4" BONDING SCREW
SCOUT DECK ANCHOR 16" 16" 1" X 4" ANCHOR BOLT (4) 10" 3 1/8" 5" 6" MIN COPPER WIRE TO ATTACH TO BONDING GRID 3 1/4" BONDING SCREW CONCRETE DECK SPECIFICATIONS: THE AQUA CREEK PRODUCTS' SCOUT DECK ANCHOR
enclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets)
lri030784900.eps lri031083400.eps enclosures to ATEX and enclosures for special custom design (EEx p and NEMA cabinets) fri040466500.eps Stainless steel and plastic enclosures for use in potentially explosive
onlinecomponents.com
Mounting Brackets E-L/F-L Slits/Reflectors E-S/E-R CSM_E-L_F-L_E-S_E-R_DS_E Mounting Brackets [Refer to Dimensions on page.] Model Fitting materials Count E-L Iron, zinc plating Accessories Applicable
Standard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
TECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description RP2300FC, RP2301FC Router CONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model
INSTRUCTIONS 360 Y-DROP HAGIE STS 2015
INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INSTRUCTIONS 60 Y-DROP HAGIE STS 05 INTRODUCTION Before beginning, it s important to know where each mounting bracket fits relative to the row spacing involved. The
Type 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulators used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to. bar ( to 4 psi). to bar (8 to 9 psi)
DEADBOLT SETS, MECHANICAL FEATURES
, MECHANICAL FEATURES 8000 SERIES LOW PROFILE CYLINDER DEADBOLT FOR 1 5 8 (41mm) DOOR PREP All deadbolts feature a ½ low-profile cylinder projection. CASE: Deadbolt case is formed of heavy gauge steel
Cable entries. Contents. Cable entries. Cable entries Introduction L.2 L.1. Standard cable glands - Plastic L.5. Standard cable glands - Brass L.
Contents Introduction.2 Standard cable glands - Plastic.5 Standard cable glands - Brass.7 EMC cable glands.14 Standard cable glands - Stainless steel.16 Cable glands for Ex applications - Brass.17 Adaptors.18
1000/13.02 KOBSERT. Thread inserts for metals
1000/13.02 KOBSERT Thread inserts for metals Contents KOBSERT Thread inserts for metals Page The principle 3 The benefits 3 Product types 3 Applications in the Automotive and General industry 4 Technical
Mounting and Operating Instructions EB 8546 EN. Supply Pressure Regulator Type Fig. 1 Supply pressure regulators
Supply Pressure Regulator Type 4708 Type 4708-5352 on Type 3730 Positioner Type 4708-52 with filter receptacle Type 4708-6252 on Type 3372 ctuator Fig. Supply pressure regulators Mounting and Operating
Spare parts list ( ) Spare parts list high-pressure 9/20-4M *
Spare parts list (5.971-969.0) Spare parts list high-pressure 9/20-4M * 05.05.2015 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list high-pressure 9/20-4M * (5.971-969.0)... 6
SERIES 2 RAMP OWNER S MANUAL TOOLS REQUIRED: BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup.
SERIES 2 RAMP OWNER S MANUAL BEFORE YOU BEGIN... Read and understand these instructions before beginning a ramp setup. Use caution and care for your back when lifting, pushing, pulling, folding or unfolding
D-Sub Vertical Surface Mount Connectors RoHS compliant Economical Interface Solution for SMT Applications
D-Sub Vertical Surface Mount Connectors RoHS compliant Economical Interface Solution for SMT Applications General In the manufacture of assemblies, the trend toward using SMT components is unbroken. Whereas
Introduction. P r otective Seals Panel seal for One Hole Mounting (OHM) O-Ring seals for panel mounting Switch boots
SECTION F Introduction ACCESSORIES Switch Guar d s Prevent accidental operation of switches Switch operation limited to selected functions Adaptable to one, two and four pole config u r a t i o n s One
Description Supply pressure Pressure range Connection Device Page max. bar bar thread
Pressure Regulators Supply pressure Pressure range onnection Device Page max. bar bar thread Maxi -Series, robust, interlockable 1 0. 1.8 / 17 G¼ - G1 R0, R1.0 made of plastic, also for liquids 1,5 0 4
PRODUCT CARD WALL MOUNTED FIXED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,00 TO 2,25 M
PRODUCT CARD WALL MOUNTED FIXED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,00 TO 2,25 M I. List of components... 2 II. Complimentary products... 2 III. Product description... 3 IV. Product Purpose... 3
PHOENIX, ARIZONA USA
NEW PRODUCTS MODEL: US-AASS-80 DESCRIPTION: Cantilever Arm 80 MEETS OSHA & ANSI Z359.14 CLASS B 1-800-850-5914 PHOENIX, ARIZONA USA WWW.ULTRASAFEUSA.COM CANTILEVER ARM The Ultra-Safe cantilever arm has
Type 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
Spare parts list. ( ) Spare parts list HD 3.0/20 C Ea
Spare parts list (5.972-551.0) Spare parts list HD 3.0/20 C Ea 24.06.2016 www.kaercher.com EN Page 2 / 51 Page 3 / 51 Page 4 / 51 Table of contents Order instructions Spare parts list HD 3.0/20 C Ea (5.972-551.0)
CFSW. Hinges with built-in safety multiple switch
CFSW. Hinges with built-in safety multiple switch ELESA Original design Elesa Standards Main dimensions Fitting Weight Code Description L B f ±0.2 f 1 ±0.2 H h 1 h 2 d 3 d 4 C [Nm]# g 426601 CFSW.110-6-2NO+2NC-C-A
PRODUCT CARD WALL MOUNTED SIDE FOLDED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,2 TO 2,45 M
PRODUCT CARD WALL MOUNTED SIDE FOLDED BASKETBALL CONSTRUCTION PROJECTION: FROM 1,2 TO 2,45 M I. List of components... 2 II. Complimentary products... 2 III. Product description... 3 IV. Product Purpose...
ibridge and ibridge Ultra
2.00 mm Board to Cable Connectors ED. 06 10.2016 Catalog EA IB001 erni.com erni.cn TABLE OF CONTENTS OVERVIEW General 03 Technical Details 04 Features 05 Electrical and Mechanical Characteristics 10 Ordering
8MAY15 US RACK, Inc Falcon Drive, Madera, CA
8MAY15 US RACK, Inc. - 2850 Falcon Drive, Madera, CA 93637-559-661-3050 INSTRUCTIONS for Bedrail-mounted MOTORCYCLE RACK, Model 2001-4TRA WARNING: Do NOT attempt to install or use this rack without following
ORNAMENTAL CANTILEVER GATE INSTRUCTIONS
U.S.A. Patent Number 5,36,83 ORNAMENTAL CANTILEVER GATE INSTRUCTIONS *NOTICE: Ornamental Cantilever Gates are supplied with rolls of 2 mesh safety screening in sufficient quantities to cover the entire
Assembly-, installation- and maintenance instruction manual for bladder accumulators IBV / EBV , top reparable
Page 1 von 8 Assembly-, installation- and maintenance instruction manual for bladder accumulators IBV / EBV 100-575, top reparable Content Seite 0 Legend 2 1 Overview 2 2 Accumulator assembly and installation
Pressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
Installation of 2 Tier In Line Greeting Card Rack
Installation of 2 Tier In Line Greeting Card Rack Material Sent to Store: Greeting Card Fixtures: 4ft Inline Tier Kit (1 per every 4ft based on planogram) 3ft endcap Tier Kit (will not receive if planogram
VACUUM REGULATORS CONTENTS
CAD drawing data catalog is available. ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Small Regulators Features 759 Specifications, Order Codes, Flow Rate
Spare parts list ( ) Spare parts list HD 1090 WS *
Spare parts list (5.955-706.0) Spare parts list HD 1090 WS * 26.01.2015 www.kaercher.com EN Table of contents Spare parts list HD 1090 WS * (5.955-706.0)... 6 10 Individual parts... 7 11 Individual parts...
CATALOGUE OF FASTENERS We make quality basis of each system. 07 Furniture nuts. 13 Furniture fasteners. 01 Chipboard, wood screws, hanger bolts
01 Chipboard, wood screws, hanger bolts 07 Furniture nuts 13 Furniture fasteners 02 Drywall screws, Fibreboards screws 08 Threaded rods 14 Window frame screws, metal anchors 03 Self-tapping screws, Self-drilling
SG33KTL-M Quick Installation Guide. 1 Unpacking and Inspection
SG33KTL-M Quick Installation Guide This guide provides a general instruction of the installation procedures of SG33KTL-M. In no case shall this guide substitute for the user manual or related notes on
ROLLER SLIDE BALL BEARING
ROLLER SLIDE BALL BEARING ROLLER SLIDE SYSTEM BALL BEARING SLIDE SYSTEM Standard slides and ball bearing slides offering a variety of top quality movement systems. www.grassusa.com Roller slides: Tried-and-tested
ARCA cabinet NEW. High performance polycarbonate cabinet. Protection in demanding environments
ARCA cabinet NEW High performance polycarbonate cabinet Protection in demanding environments NEW Fibox ARCA Fibox ARCA non corrosive electrical cabinets for use in extremely harsh and demanding environments
Direct Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
Spare parts list. ( ) Spare parts list HD 3.0/20 C Ea
Spare parts list (5.972-551.0) Spare parts list HD 3.0/20 C Ea 20.04.2016 www.kaercher.com EN Table of contents Order instructions Spare parts list HD 3.0/20 C Ea (5.972-551.0) 10 Housing 20 Pump set 21
Instructions for Use. Plug connection for medical gas and vacuum acc. to DIN / 2004 DIN EN ISO
Instructions for Use Plug connection for medical gas and vacuum acc. to DIN 13260-2 / 2004 DIN EN ISO 9170-1 Table of Contents Page 1. MANUFACTURER S DATA... 3 2. INTRODUCTION... 4 3. APPLICATION... 5
ABTQ-110 rev 00 (Last review: 28 Aug 12) INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR ABTECH S RANGE ENCLOSURES IECEx SIR U SERIAL No
ABTQ-110 rev 00 (Last review: 28 Aug 12) INSTALLATION, OPERATION & MAINTENANCE INSTRUCTIONS FOR ABTECH S RANGE ENCLOSURES IECEx SIR 05.0046U SERIAL No 20 TYPE SX Ex e II C Gb Ex tb IIIC Db IP6* IECEx SIR
OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL)
OWNER'S MANUAL LOCK-N-LOAD BULLET FEEDER (PISTOL) Table of Contents ASSEMBLY ASSEMBLY Pistol Bullet Feeder... Page 3 CHANGE-OVERS The Hornady Lock-N-Load Pistol Bullet Feeder is capable of feeding most
Installation Instructions - Electric Aluminum Drive Systems for Arm Sets to 22 Electric Arm Systems , ,
Installation Instructions - Electric Aluminum Drive Systems for Arm Sets to 22 Electric Arm Systems - 204-025, 206-025, 22-025 NB /0/ 607-0020 404 N. Marshall Ave. El Cajon CA. 92020 For technical support
EXH. Specifications. Descriptions. Min. working pressure MPa
Functional explanation Primary pressure flowed from passes through check valve on side, and flows in chamber A and B. Primary pressure also passes through pressure adjustment section and switching valve,
830 SureFlo Soap Systems Installation Instructions. Foam Soap Cabinet... Pages 2-9 Liquid Soap Cabinet... Pages 10-19
830 SureFlo Soap Systems Installation Instructions Foam Soap Cabinet... Pages 2-9 Liquid Soap Cabinet... Pages 10-19 INSTALLATION INSTRUCTIONS SureFlo SOAP DISPENSING SYSTEM FOAM VERSION ONLY B-830 Foam
IBS, INCORPORATED Index Washers W A S H E R S. Washers, Lock Alloy C-8 External Tooth C-10. Internal Tooth C-10
IB, INCOPOTD Index ashers ssortments Flat asher Copper C-11 Fender asher C-9 eavy Duty C-5 Lock asher Internal & xternal tar asher C-10 ur-lock Vibration-esistant ashers C-7 Back-Up ashers luminum ound
SPINNAKER POLE TRACK AND GUIDE CONSOLE
1(5) SPINNAKER POLE TRACK AND GUIDE CONSOLE General Assembly single tracks Cut-out for spreader bracket Fitting single guide console Assembly single tracks with bedding Cut-out for spreader bracket Fitting
Installation Instructions - Electric Steel Drive Systems for Arm Sets to ,
Installation Instructions - Electric Steel Drive Systems for Arm Sets to 22 208-025, 209-025 NB /0/ 607-0029 404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 Step.
Spare parts list ( ) Spare parts list HD 2.3/14 C Ed Food
Spare parts list (5.972-564.0) Spare parts list HD 2.3/14 C Ed Food 05.08.2013 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HD 2.3/14 C Ed Food (5.972-564.0)... 6 10 Housing
Dual Electronic Basketball System Owners Manual
Dual Electronic Basketball System Owners Manual Customer Service Center N53 W24700 South Corporate Circle Sussex, WI 53089 U.S.A. WARNING! READ AND UNDERSTAND OPERATOR'S MANUAL BEFORE USING THIS UNIT.
Instruction Manual. Standard Surge Eliminator. Standard X. Flushable X - X
Standard Surge Eliminator Standard 104052 - X Flushable 104053 - X - X Page 2 of 16 Issue: 2.3 Index Section 1.1 General Description 1.2 Operating Principle 1.3 Specification 1.4 Fitting Selection - Standard
Mounting and Operating Instructions EB 8546 EN. Type 4708 Supply Pressure Regulators. Translation of original instructions. Type Type
Type 4708 Supply Pressure Regulators Translation of original instructions Type 4708-53 Type 4708-64 Type 4708-12 Mounting and Operating Instructions Edition March 2018 Note on these mounting and operating
OPAL & SWIFT - Front Chassis, 3 Wheel
Titel - 1 - Titel - 2 - Table Of Contents STERLING Opal & Swift... 4 CHASSIS... 4 OPAL & SWIFT - Front Chassis, 3 Wheel... 4 OPAL & SWIFT - Front Chassis, 4 Wheel... 6 OPAL & SWIFT - Rear Chassis... 8
EZ-Mount 4 Spring Enclosed System to 22 (Low & High Mount Applications) Installation Instructions
501-1768 (With Wire) 501-1769 (No Wire) 501-1766 (With Wire) 501-1767 (No Wire) 607-015 WLH 06/20/18 TABLE OF CONTENTS ***Assembly*** ***Parts*** Pivot Points and Mounting Locations (Low Mount)... 1 High
SLIDING RAIL SYSTEM 208-580-1904 www.fishfighterproducts.com FFP sliding Rail system The FFP Sliding Rail system will allow you to easily adjust the location of your rod holders, tackle trays, or just
RIV991 PNEUMATIC PUNCHING TOOL FOR HEXAGONAL HOLES OPERATING INSTRUCTIONS
RIV991 PNEUMATIC PUNCHING TOOL FOR HEXAGONAL HOLES OPERATING INSTRUCTIONS GENERAL INFORMATION ASSISTANCE In case you need any assistance concerning the use and the maintenance of the tool, or in case you
Hand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
SG36KTL-M Quick Installation Guide. 1 Unpacking and Inspection
SG36KTL-M Quick Installation Guide This guide provides a general instruction of the installation procedures of SG36KTL-M. In no case shall this guide substitute for the user manual or related notes on
Spare parts list ( ) Spare parts list HDS 700 B
Spare parts list (5.955-875.0) Spare parts list HDS 700 B 02.09.2013 www.kaercher.com EN Page 2 Page 3 Page 4 Table of contents Spare parts list HDS 700 B (5.955-875.0)... 6 10 Individual parts... 7 11
Spare Parts Catalogue. Version: 2018/05/28d EN
Spare Parts Catalogue TABLE OF CONTENTS Colour specifications Steel and plastic colours... 5 Base and legs Base with manual leg spread, Birdie and Birdie Compact... 6 Pedal mechanism assembly.... 8 Pedal
Precision Pressure Regulators
hapter - Pressure Regulators Pressure range onnection thread Device Page 3 mm, high precision 0.0 2 / 8 bar G 1 8 RI.02 highly sensitive, max. 3 bar supply pressure 0.002 0.12 / 31 bar ¼"NPT R40.03 without
Beach Dolly with cradle & keel pad Assembly Instructions
Beach Dolly with cradle & keel pad Assembly Instructions H G B A D C I J L F PART NAME QTY A. AXLE... 1 with tongue bracket and cradle supports attached B. CRADLE SUPPORT BAR... 2 C. TONGUE... 1 D. TONGUE
THOR 10 HAMMER CAGE INSTRUCTIONS
75 " 7m 78 4" m 6" 8.8m 45 ".70m 4.9deg 6 4" 6m 44 4".67m 75 " 7m 9 4" 0m 44".m 497 4".64m The 70, Thor Hammer Cage, consists of four heavy duty aluminum net poles. The unique pole structure reduces the
MUELLER. A Wall Type. Indicator Post. Reliable Connections. General Information 2. Technical Data/ Dimensions 3. Installation 4-5.
Installation Instructions manual MUELLER table of contents PAGE A-20814 Wall Type General Information 2 Technical Data/ Dimensions Installation 4-5 Maintenance 6 Parts 7 Indicator Post! WARNING: 1. Read
Premium Series. Economical Price & Reliable Performance. High Quality. Rust-Resistant. Long Life. Tamper-Resistant locking Screw.
Premium Series High Quality Forged Brass Body Rust-Resistant Nickel Plated Finish Long Life Corrosion Resistant Valve Seat Economical Price & Reliable Performance Tamper-Resistant locking Screw Reduces
B Upper Guide & Carbide Block. B Filler Block (Nylon) B004131S. Blade Cleaner. (Steel)
REPLACEMENT PARTS FOR BIRO MAINTENANCE/REPAIR KIT Models 11, 22, 33, 1433, 1433FH, 3334, 3334FH BRK2...Biro Repair Kit 1............ Upper Guide & Carbide Block 1.......... 3............... s 2.......
Conductor Bushings Series 8174
> Current lead-in for Ex d enclosures > 1 to 72 conductors combined in one current lead-in > Series screw-in plug-in > For voltages up to max. 1 V > For size conductor up to 7 mm 2 www.stahl.de 3163E The
Pole & Tree Climbers. Pole & Tree Climbers. 1972AR Series. Pole Climbers with 1-1/2" Gaffs Complete Set
MADE IN USA 8" x 8" (203 x 203 mm) cushioned, high-grade leather climber pads for maximum comfort. Adjustable climber length. Steel sleeve moves in 1/4" (6 mm) increments for the most comfortable fit.
Technical Manual. Stand 05/2011
MULTI-MONTI Technical Manual Stan5/2011 Technical Manual HECO-MULTI-MONTI Contents Instructions for fixing P. 3 Chapter 1 : Admissible loads in as well as P. 4 anchor-characteristics for MMS-6 to MMS-16
WELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING
02 Push-to-Close Latch
142 02 Push-to-lose Latch ousing: Polypropylene, black or white Pole pieces and mounting : Steel, zinc plated Magnet:, large: Barium ferrite : Strontium ferrite 7.7 (.30) 13.3 (.52) 6.1 (.24) 23.6 (.93)
ATS430 turbidity sensor Retractable insertion assembly
A MEASUREMENT & ANALYTICS INSTRUCTION ATS430 turbidity sensor Retractable insertion assembly Measurement made easy 1 Introduction This publication details installation procedures for the retractable insertion
Accessories. Finger Guards 134. Filter Guards grille 139. Accessories 140. Technology. DC Axial Fans. DC Radial Fans. Specials.
13 Technology Finger Guards 134 Filter Guards grille 139 140 Specials DC Axial Fans DC Radial Fans Everything that you need for your fan. ebm-papst provides an extensive range of accessories for optimum
Mainz Product Catalogue
2019 Mainz Product Catalogue Stainless steel wire, fittings, hardware and tools for wire balustrades Stainless steel wire Stainless steel hardware and fittings Tools Mainz Pty Ltd Ph: (08) 92756246 www.wirebalustrades.com.au
ALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
Invacare Top End Parts Catalog
40 6rd Circle North (800) 2-8677 (727) 22-8677 Fax: (727)22-007 Invacare Top End Parts Catalog Rev. A Jan, 200 Top End 40 6rd Circle North (800) 2-8677 (727) 22-8677 Fax: (727)22-007 Frame / Parts 27 28
INSTRUCTION MANUAL. PRESSUREMETER Model PENCEL. Roctest Limited 2016, All rights reserved
INSTRUCTION MANUAL PRESSUREMETER Model PENCEL Roctest Limited 2016, 2018. All rights reserved This product should be installed and operated only by qualified personnel. Its misuse is potentially dangerous.
Item No.: /
mounting types; for parallel or perpendicular mounting; pin spacing mm / 0197 in; 4-pole - Item No: 769- Male connector; with CAGE CLAMP connection and fixing flanges; for screw or similar mounting types;
3M Telecommunications Solutions for Networks. Quante QSA (= LSA plus) System Catalogue. Innovation
3M Telecommunications Solutions for Networks Quante QSA (= LSA plus) System Catalogue Innovation IDC Modules Overview 3M Quante Cross Connect System QSA QSA Series 1 Connection modules for screw fixing
ATHLETICS Track & Field Equipment
ATHLETICS Track & Field Equipment Aluminium Curbing Order No. 11260 The aluminium curbing is made from special made anodized aluminium profiles. It is a mobile marker and separator of the running track.
DP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No
DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number
ASSEMBLY INSTRUCTIONS S-Dome system
ASSEMBLY INSTRUCTIONS S-Dome system USA Table of contents TABLE OF CONTENTS THE COMPANY SAFETY REGULATIONS MATERIALS REQUIRED TOOLS REQUIRED ASSEMBLY TERMS AND CONDITIONS 2 3 4 5 7 9 14 Table of contents
TECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. TD0101, TD0101F Description Impact Driver L PRODUCT P 1/ 14 CONCEPT AND MAIN APPLICATIONS Models TD0101 and TD0101F are cost-competitive 100N.m-class impact driver developed
MDM Accessories
Accessories General Hardwares are the screwlock assemblies or the brackets used for the mounting of connectors on panels or PC, or for the fixing of plugs and receptacles. They are not fixed on the connectors
First the grid is assembled: bend it round so that the fixing hooks go from outside to inside.
How to install the low WOB kit The kit contains: * 2 grids (white) that are fixed at the inside of the counter lungs, next to the P ports, to keep the counter lungs open so that gas can flow in and out
How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
VK/VP SERIES : Sealless Vertical Pump. Assembling Instructions 2010
VK/VP SERIES : Sealless Vertical Pump Assembling Instructions 2010 20610 Manhattan Place Suite 116 Torrance, CA 90501 Phone: 310-328-9114 Fax: 310-328-9441 1. Motor Shaft and Pump Base (1) (2) Place a
QRPGuys Single Lever Mini Paddle
QRPGuys Single Lever Mini Paddle First, familiarize yourself with the parts and check for all the components. If a part is missing, please contact us and we will send one. You must use qrpguys.parts@gmail.com
Ford Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
ZICO* NFPA Will Change the Way You Store Your Self-Contained Breathing Apparatus "LOAD & LOCK" WALKAWAY BRACKETS 1054PM1
"LOAD & LOCK" WALKAWAY BRACKETS ZICO* 0PM REV. 7--0 NFPA 90-0 Will Change the Way You Store Your Self-Contained Breathing Apparatus "Where SCBA units are mounted within a driving or crew compartment, a
Baying and lifting. Whitepaper
Baying and lifting Whitepaper Table of contents Introduction... 4 Enclosures baying... 6 Floor standing enclosures... 8 Side to side baying... 8 Internal baying brackets CCI06... 8 External baying brackets
Installation Guide, MPower Echelon Console
Installation Guide, MPower Echelon Console AC Performance, AC Sport and AC Performance Plus Schwinn Echelon Console (External Routing) 1. Install batteries to console. Mount the console to the bike. 2.
Installation Instructions - Steel 4 Spring Arm Kits , , , ,
Installation Instructions - Steel Spring Arm Kits 50-0709, 50-079, 50-0750, 50-075, 50-078 GR 8// 07-00 0 N. Marshall Ave. El Cajon CA. 900 For technical support call us at (800) 8-075 Step. Determining
F13.11 PARALLEL HINGES F13 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS
F13 PROJECT-OUT WINDOWS AND TOP HUNG WINDOWS F13.11 01.06.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General...F13.11.03
Quadair. Air Hockey Table Owners Manual. Assembly operation and care instuctions. Serial # Distributed By. Sales Person. Technical Service #
Version 12.1.11 Quadair Air Hockey Table Owners Manual Assembly operation and care instuctions. Serial # Distributed By Sales Person Technical Service # QUADAIR PATENTED WORLDWIDE Forward First, we would
Continental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
Thin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1.
![Thin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1.](/thumbs/87/95552396.jpg "Thin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1.")
Thin pressure gauge G401-W Series Thin, compact design ideal for incorporating devices. Suitable for filter regulator, regulator, and pressure switch (P4000-W). onnection: O ring seal, set screw G401-W