B ADDENDUM # 1
|
|
- Joan Paul
- 5 years ago
- Views:
Transcription
1 B ADDENDUM # 1 FROM: Kim Sowell Campus Box 12 Ph: Fax: TO: All Bidders DATE: 1/3/2019 NEW CLOSING DATE AND TIME: 2:00 PM SUBJECT: B Addendum Load Cells, Re-Calibration and Services REVISIONS TO BID SPECIFICATIONS: RFP #B has been reopened in order to revise specifications that needed clarifications. New Closing Date January 15 th, 2:00 pm. Contract period from February 1 st, 2019 through January 31 st, 2020 with options to renew automatically for four (4) additional (1) one-year renewal periods. Attached is the Revised Bid Form. This form must be used when bidding project. NO. OF PAGES (including cover sheet): 5 Bid Responses must be mailed or hand delivered (faxed and ed responses are not allowed) to WSU Office of Purchasing prior to the bid closing date and time! Wichita State University Office of Purchasing Kim Sowell 1845 Fairmount, Campus Box 12 Morrison Hall, Room 021 Wichita, KS Phone: and Fax:
2 REVISED BID FORM Load Cells, Calibrations, Components, Instruments and Services Load Cells for purchase (Calibration Standard Grade, 6-pin bayonet connector or included adapter): 300 lbf 2,000 lbf 10,000 lbf 2 100,000 lbf 200,000 lbf
3 Load Cells for purchase (Fatigue Rated Grade, Single Flat Rate Bridge, 6-pin bayonet connector or included adapter): 150 lbf 250 lbf 2, 12, 2 Load Cells for purchase (Fatigue Rated Grade, Dual Flat Rate Bridge, 6-pin bayonet connector or included adapter): 150 lbf 250 lbf 2,
4 12, ,000 lbf 200,000 lbf Dynamometer: Alignment Dyno, Round: 14.0" OAL, 5/8" Diameter Test Section Alignment Dyno, Flat:.35" Thick, 14.0" OAL Alignment Dyno 50K: 20.0" OAL, 1" Diameter Test Section Services: All calibrations must be accredited to ISO and meet the requirements of the latest revision of ASTM E74 in both tension and compression directions. Data is given in units of mv/v. Class A Calibration Cost: 1 and below 1, dual bridge, and below 12, to 59,000 lbf 12, to 59,000 lbf, dual bridge
5 60,000 lbf to 112,000 lbf 60,000 lbf to 112,000 lbf, dual bridge 112,000 lbf and above 112,000 lbf and above, dual bridge Transducer Simulator Calibration Class AA Calibration Cost: 1 and below 12, to 59,000 lbf 60,000 lbf to 112,000 lbf Additional ascending or descending points Hydraulic and Calibration Load Frame Components Controller board Hydraulic controller 1 Actuator 110,000 lbf Actuator Instruments High Precision Display Indicator Control Bridge Amplifier Transducer Simulator Support Services Class AA calibration coefficients and testing points generated in text file for ASTM E74 calibration software currently owned by WSU/NIAR Please provide a % discount for all fatigue, load cells, force standard load cells and mini load cells not listed in tables above. % Discount Please provide a % discount for larger orders. Either by quantity or dollar amount or both. This information can be given on a separate spread sheet composed by the individual bidders.
Low Profile Load Cells
Low Profile Load Cells World Leading Performance With Improved Linearity, Hysteresis, Creep & Thermal Performance Introducing Interface s Enhanced Low Profile Load Cell Interface Inc. pioneered the first
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z & ANSI/NCSL Z CALIBRATION
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 & ANSI/NCSL Z540.3-2006 ROBB PRECISION TOOL SERVICES, INC. 2100 196th St SW, Suite 144 Lynnwood, WA 98036 Robert Robb Phone: 425 672
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 CORPORATE CONSULTING, SERVICE, & INSTRUMENTS, INC. University Park, 221 Beaver Street Akron, OH 44304 Michael Kent Warner Phone: 330 376 3600 CALIBRATION Valid
More informationTriaxial automated systems
Triaxial automated systems Pressure ranges: 0-1MPa (0-10 bar) 0-2MPa (0-20 bar) 0-3MPa (0-30 bar) 0-4MPa (0-40 bar) 0-5MPa (0-50 bar) Volume capacity: 230cc Interface: Touchscreen / USB connection (other
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 APPLIED TEST SYSTEMS 154 East Brook Lane Butler, PA 16002 Rob Carroll Phone: 724 283 1212 CALIBRATION Valid To: March 31, 2018 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 ACME SCALE COMPANY 1801 Adams Ave San Leandro, CA 94577 Barbara Byrd Phone: 510 638 5040 CALIBRATION Valid To: August 31, 2019 Certificate
More informationLABORATORY OF THE STRUCTURAL DIVISION OF THE DEPARTMENT OF CIVIL ENGINEERING OF MINHO UNIVERSITY
LABORATORY OF THE STRUCTURAL DIVISION OF THE DEPARTMENT OF CIVIL ENGINEERING OF MINHO UNIVERSITY 1 INTRODUCTION The Laboratory of the Structural Division of the Department of Civil Engineering of Minho
More informationAccredited Laboratory
Accredited Laboratory A2LA has accredited CAL-RITE CORPORATION Naperville, IL for technical competence in the field of Calibration This laboratory is accredited in accordance with the recognized International
More informationSATEC COMPRESSION MACHINE Standard Operating Procedure
Andrew Sutherland Supervisor of Laboratory/Workshop Mechanical & Electrical Type of hazards (mechanical, electrical, chemical, biological or radiation) SATEC Hydraulic Compression Tester Room A13 Name
More informationOIL & GAS INSTRUMENTATION LOAD-FORCE-TORQUE SENSORS
OIL & GAS INSTRUMENTATION LOAD-FORCE-TORQUE SENSORS LOAD CELL MANUFACTURER FROM DESIGN TO AFTER-SALES SUPPORT, SENSY IS DEDICATED TO SERVING THE OIL & GAS INDUSTRY OUR STRENGTHS SENSY S.A. develops and
More informationSAN ANTONIO WATER SYSTEM PURCHASING DEPARTMENT FORMAL INVITATION FOR BIDS ANNUAL CONTRACT FOR VERTICAL SHORES PARTS AND SERVICE ADDENDUM 1
SAN ANTONIO WATER SYSTEM PURCHASING DEPARTMENT Issued By: Joseph Ramon Date Issued: July 29, 2014 BID NO.: 14-2065 FORMAL INVITATION FOR BIDS ANNUAL CONTRACT FOR VERTICAL SHORES PARTS AND SERVICE ADDENDUM
More informationPTC INSTRUMENTS 2301 Federal Ave Los Angeles CA Phone: Model 500 Automatic Operating Stand Type 3
The Model 500 automatic operating stand provides constant load, controlled rate-of-descent, and application velocity, through a geared electric motor and braking mechanism that alternately lowers the durometer
More informationSAN ANTONIO WATER SYSTEM I.H. 10 Ground Storage Tank Rehabilitation and Painting Project SAWS Job No Solicitation No.
SAN ANTONIO WATER SYSTEM I.H. 10 Ground Storage Tank Rehabilitation and Painting Project SAWS Job No. 13-0118 Solicitation No. B-16-014-GC September 1, 2016 TO BIDDER OF RECORD: The following changes,
More informationGrips and Fixtures JACOBS CHUCKS COMPRESSION PLATENS RECTANGULAR PLATENS JACOBS CHUCKS PLATENS
JACOBS CHUCKS PLATENS Grips and Fixtures JACOBS CHUCKS Jacobs Chuck fixture are ideal for holding small cylindrical samples during tensile or compression testing. They are commonly used for testing wire
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 APPLIED TEST SYSTEMS 154 East Brook Lane Butler, PA 16002 Rob Carroll Phone: 724 283 1212 CALIBRATION Valid To: February 29, 2020 Certificate
More informationSCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z
SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 & ANSI/NCSL Z540-1-1994 LEDFORD GAGE LAB, INC. 227 Industrial Dr. Mulvane, KS 67110 Blaine Johnson Phone: 316 777 9300 CALIBRATION Valid To: December 31, 2019
More informationHUMOR 20. High-precision Humidity Calibrator HUMOR 20. Operation
High-precision Humidity Calibrator The role of humidity calibrations that are accurate, reproducible, and documentable is becoming more and more important. ISO quality guidelines and regulations according
More informationBUYER S GUIDE AQUAlogger 520
OCEAN & ENVIRONMENTAL BUYER S GUIDE AQUAlogger 520 Mini Temperature and Pressure Logger AQUAlogger 520 Aquatec s primary temperature and depth model, the AQUAlogger 520, combines years of product development
More informationComparative Tests on Differential Pressure Control Valves
Comparative Tests on Differential Pressure Control Valves Final Report 56148/1 Edition 2 This report supersedes Final Report No: 56148/1 dated 10 October 2013 Carried out for Danfoss A/S Hydronic Balancing
More informationISO DownForce Valve Block Tee (Kinze 4000)
NOTE: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Hydraulic Kit ISO DF Frame Valve Block Tee (Kinze 4000) 4101301 1 Hydraulic hose -08
More informationDiscontinued. Powers Controls. Technical Instructions Document No P25 RV Rev. 1, May, RV 201 Pressure Reducing Valves.
Powers Controls RV 201 Pressure Reducing Valves Description Features Product Numbers Dual Pressure PRV Technical Instructions Document No. 155-049P25 RV 201-1 Single Pressure PRV The RV 201 Pressure Reducing
More informationLab 1c Isentropic Blow-down Process and Discharge Coefficient
058:080 Experimental Engineering Lab 1c Isentropic Blow-down Process and Discharge Coefficient OBJECTIVES - To study the transient discharge of a rigid pressurized tank; To determine the discharge coefficients
More informationAmerican made since 1954
Hampden Engineering Corporation LOOK TO HAMPDEN FOR YOUR TRAINING NEEDS! Hampden s selection of Instrumentation and Process Control Training equipment is far larger than we are able to show you in this
More informationMTS Restan. Automatic System for Residual Stress Measurement by Hole-Drilling
Automatic System for Residual Stress The MTS3000 - Restan system for measuring residual stresses Fully automatic drilling and acquisition process ensuring high repeatability High speed drilling (400,000
More informationList of Figures. List of Tables
City of Columbia Engineering Regulations PART 19: SPECIFICATIONS FOR FENCING MATERIALS Table of Contents Paragraph Description Page No. 19.1 General 19-1 19.2 Construction Materials 19-1 List of Figures
More informationTechnical Bulletin 57: Cut Testing for Wire Rope. Test Set-up. Pubilshed: October 2017
Technical Bulletin 57: Cut for Wire Rope The common conception of wire rope or other steel slings is that it is safer to rig over an edge compared to a synthetic sling. This has never been proven. Slingmax
More informationTorqBolt Wedge Anchors Torque Controlled Expansion Anchor
TorqBolt Wedge Anchors Torque Controlled Expansion Anchor Product Description The Torqbolt wedge anchor is a torque-controlled, wedge expansion anchor for heavy duty fastening applications where high pull
More informationHUMOR 20. High Accuracy Humidity Calibrator. Water T, p1 HUMOR 20 V1.0
High Accuracy Humidity Calibrator The role of humidity calibrations that are accurate, reproducible, and documentable is becoming more and more important. ISO quality guidelines and regulations according
More informationADDENDUM IMPORTANT DOCUMENT INVITATION TO BID ADDENDUM. OPENING DATE & TIME: January 3, 2018 at 3:00PM
Procurement Services ADDENDUM IMPORTANT DOCUMENT INVITATION TO BID ADDENDUM ITB NUMBER: 1708MC OPENING DATE & TIME: January 3, 2018 at 3:00PM ITB TITLE: X-Ray Photoelectron Spectroscopy System ADDENDUM
More informationCertified Accuracy. Ring Force Gauge. Models and Capacities Available. Design and Principle of Operation
Certified Accuracy Ring Force Gauge The accurate measurement of mechanical forces is required in hundreds of applications from a simple weighing procedure to the calibration of testing machines and load
More informationSIKA Ba_ODWT15_en 05/2018. Operating manual for oil deadweight tester 0.015% accuracy ODWT15
SIKA Ba_ODWT15_en 05/2018 Operating manual for oil deadweight tester 0.015% accuracy ODWT15 Table of Contents 1 introduction...1 1.1 general product description... 1 1.2 operating principle... 1 2 general
More informationThis document will provide detailed specifications, a bill of materials (BOM), and assembly instructions for the Official Competition Field.
This document will provide detailed specifications, a bill of materials (BOM), and assembly instructions for the Official Competition Field. Please note that this field utilizes the VEX IQ Challenge Field
More informationCERTIFICATE OF ACCREDITATION ISO/IEC 17025:2005 ANSI/NCSL Z (R2002)
CERTIFICATE OF ACCREDITATION ANSI-ASQ National Accreditation Board 500 Montgomery Street, Suite 625, Alexandria, VA 22314, 877-344-3044 This is to certify that Antibus Scales & Systems, Inc. 1919 Research
More informationENGINEERING TECHNICAL REPORT
SSP DUOLOK FITTINGS ON 1.000 x 0.139 WALL 316SS TUBING ENGINEERING TECHNICAL REPORT SSP 8250 Boyle Parkway Twinsburg, Ohio 44087 U.S.A. mysspusa.com 1.330.425.4250 1 TABLE OF CONTENTS 1.0 Introduction
More informationFiber Cable Puller with Tuf-Lugger lite
7 OPERATING INSTRUCTION MANUAL Fiber Cable Puller with Tuf-Lugger lite Copyright 2015 DCD Design & Manufacturing Ltd. Revision 1.0 IMPORTANT SAFETY INSTRUCTIONS READ ALL INSTRUCTIONS BEFORE USING The Fiber
More informationAccessories for MTS Criterion Systems. Address a full spectrum of standard and unique monotonic testing requirements. be certain.
l Accessories for MTS Criterion Systems Address a full spectrum of standard and unique monotonic testing requirements be certain. MTS COMPLEMENTS ITS MTS CRITERION SYSTEMS WITH A WIDE ARRAY OF GRIPS AND
More informationIdentify the Principal Investigator for this data set, including general affiliation, if applicable.
1. TITLE 1.1. Data set identification Soil water potential measured by tensiometer 1.2. Revision date of this document (yy/mm/dd) 05/99 2. INVESTIGATOR(S) Identify the Principal Investigator for this data
More informationGear hobs Accuracy requirements
BRITISH STANDARD Gear hobs Accuracy requirements ICS 21.200 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW BS ISO 4468:2009 BS ISO 4468:2009 This British Standard was published
More informationBiPAP Vision Ventilator Testing with Various Patient Interfaces Report February 18, 2002
BiPAP Vision Ventilator Testing with Various Patient Interfaces Report 48086 February 18, 2002 Prepared for ResMed by Valley Inspired Products, LLC inspiredrc.com Valley Inspired Products, LLC Revision
More informationHUMOR 20 HUMOR 20. High-precision Humidity Calibrator. Water T, p1
High-precision Humidity Calibrator The role of humidity calibrations that are accurate, reproducible, and documentable is becoming more and more important. ISO quality guidelines and regulations according
More informationGA-300 Gas Analyzer. Technical Note. Overview. Front Panel. iworx Systems, Inc. GA-300
Technical Note GA-300 Overview The GA-300 CO2 and O2 Gas Analyzer is easy to use, robust, and adaptable to human, animal, and plant applications. The GA-300 has two analog outputs to allow recording and
More informationBRINGING YOU THE SINCE 1980
BRINGING YOU THE QUALIT Y YOU DESERVE SINCE 1980 2 0 16 P R O D U C T C ATA LO G A Division of Vermont Precision Tools, Inc. QUALITY POLICY Our policy is to consistently achieve or exceed customer satisfaction
More informationTechnical Explanation
Technical Explanation for ESI Pressure Sensors Technical Explanation What is a pressure transmitter? A pressure transmitter (also called pressure transducer or pressure converter) is a component used to
More informationTensiometer For the measurement of surface and interfacial tension
Tensiometer For the measurement of surface and interfacial tension Precise measuring instruments for research and industry Precision, flexibility, and reliability LAUDA Scientific offers proven solutions
More informationISO 6570 INTERNATIONAL STANDARD. Natural gas Determination of potential hydrocarbon liquid content Gravimetric methods
INTERNATIONAL STANDARD ISO 6570 First edition 2001-06-15 Natural gas Determination of potential hydrocarbon liquid content Gravimetric methods Gaz naturel Détermination de la teneur en hydrocarbures liquides
More informationOctober 30, Subject: Solicitation Number: ITB Printing of Florida Class E Driver License Handbook
October 30, 2015 To: Prospective Vendor Subject: Solicitation Number: ITB 008-16 Printing of Florida Class E Driver License Handbook Addendum No. 1 The enclosed information has been provided for consideration
More informationEn-Tegrity. A step change in subsea well control safety
En-Tegrity A step change in subsea well control safety Product Overview 7-3/8, 10,000psi, Shear & Seal Gate Valve Main Well Barrier in Intervention Well Control Package (WCP) Features Bi-Directional Sealing
More informationSolidSense II (ATEX) Pressure Transmitters. Data Sheet. Superior stability and reliability for demanding pressure measurement applications.
DS-PR-SolidSenseII-ATEX-PT-eng January, 2018 Data Sheet SolidSense II (ATEX) Pressure Transmitters SolidSense II ATEX Pressure Transmitter Pressure Transmitters Superior stability and reliability for demanding
More informationBAUSCH & LOMB ENGINEERING ROCHESTER. Title: Membrane Press Procedure Page 1 of 14
Title: Membrane Press Procedure Page 1 of 14 Author: K. Schober Attachments: 3 Released by: Date: 5/5/06 Global Document Management DCO-SOPROC PURPOSE/SCOPE To provide instructions for how to conduct the
More informationSIMULATED PROOF TESTING OF MORTAR BASEPLATES
SIMULATED PROOF TESTING OF MORTAR BASEPLATES Andrew G. Littlefield* and Joseph Sibilia US Army RDECOM-ARDEC Benét Laboratories Watervliet, NY 12180 USA Abstract In the current environment there is a need
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Butterfly Valves C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 15103 - Butterfly Valves C O N T E N T S PART 1 - GENERAL... 1 1.01 REQUIREMENT... 1 1.02 VALVE MANUFACTURER... 1 1.03 GUARANTEE... 1 PART 2 - PRODUCT... 1
More informationDataCan. Linewise System. Description. Hardware. Applications
Linewise System Description The Linewise System is a basic acquisition system comprised of hardware and software that records and displays simple process measurements. Examples of these include: depth,
More informationMeasurement And Control Appreciation
Measurement And Control Appreciation Course Content Aim To provide an appreciation of the operation and application of process plant instrumentation used for the measurement and display of the main process
More informationT E N D E R Tender # T SCOTT SCBA AIR PACKS AND ACCESSORIES SAINT JOHN FIRE DEPARTMENT
T E N D E R Tender # 2011-424002T SCOTT SCBA AIR PACKS AND ACCESSORIES SAINT JOHN FIRE DEPARTMENT Sealed tenders addressed to the Purchasing Agent, c/o Materials and Fleet Management, 2 nd Floor, 175 Rothesay
More informationTensiometer For the measurement of surface and interfacial tension
Tensiometer For the measurement of surface and interfacial tension Precise measuring instruments for research and industry Precision, flexibility, and reliability LAUDA Scientific offers proven solutions
More informationAustralian Standard. Bourdon tube pressure and vacuum gauges AS
AS 1349 1986 Australian Standard Bourdon tube pressure and vacuum gauges [Title allocated by Defence Cataloguing Authority: GAUGES, PRESSURE AND VACUUM (Bourdon Tube Type)... NSC Gp 66] This Australian
More informationLocation of CC Number if not located with the identification:
This checklist is used for Technical Policy U. Evaluating electronic digital indicators submitted separate from a measuring element. This section is intended for lab testing only. Is permanence necessary?
More informationCertificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
More informationThe HumiPyc - Model 1 - Gas Pycnometer; Density, Moisture, Permeation Analyzer; RH sensor Calibrator
The HumiPyc - Model 1 - Gas Pycnometer; Density, Moisture, Permeation Analyzer; RH sensor Calibrator Designed, built, and supported by InstruQuest Inc. Temperature controlled, multi-technique volumetric
More informationEasy to operate even for biginners. Set up the number of test. Possible to select from 1 to times
With a force gauge and attachments, compression/tensile/peeling tests are possible up to 1000N/2500N. It provides consistent testing speed and direction, offering highly accurate test results. MX2-2500N
More informationINTERNATIONAL STANDARD
INTERNATIONAL STANDARD ISO 8655-4 First edition 2002-09-15 Piston-operated volumetric apparatus Part 4: Dilutors Appareils volumétriques à piston Partie 4: Diluteurs Reference number ISO 8655-4:2002(E)
More informationPressure Calibrators. Series PC..., PM...
Pressure Calibrators Series PC..., PM... SIKA-Precision Pressure Calibrators, Series PC..., PM... We help you, if you are under pressure! Pneumatic pressure calibrators PM 25 A, PM 25 D, PM 110 PIC pressure
More informationELE INTERNATIONAL COMPRESSION TESTER Standard Operating Procedure
Andrew Sutherland Supervisor of Laboratory/Workshop Mechanical & Electrical Type of hazards (mechanical, electrical, chemical, biological or radiation) ELE Compression Tester Name and Function of Lab/Project
More informationCompiled by: B Beard. Approved by: SH Carstens. Description of requirements and procedures for compact provers to be used as verification standards.
1. Scope Description of requirements and procedures for compact provers to be used as verification standards. 2. Reference documents Trade Metrology Act SANS1698 3. Policy A. BASIC REQUIREMENTS Compact
More informationValve test benches. Systems overview
Valve test benches Systems overview About us In the past few years WIKA has successfully integrated renowned manufacturers of calibration equipment into the group. With these established brands within
More information50KN stress rig for use on SALSA
50KN stress rig for use on SALSA REFERENCE GUIDE INTRODUCTION A 50KN rated INSTRON stress rig is available for use on SALSA for insitu tension or compression testing. Additionally the testing machine may
More informationTURBINE SEAL: AXIAL TYPE DESIGN
TURBINE SEAL: AXIAL TYPE DESIGN Our axial type seals are specifically designed for application to hydroelectric turbines and large water pumps for sewage handling, filtration, irrigation, and more. Our
More informationThe HumiPyc ( Model 2) - Gas Pycnometer; Density, Moisture, Permeation Analyzer; Filter Integrity Tester; RH sensor Calibrator
The HumiPyc ( Model 2) - Gas Pycnometer; Density, Moisture, Permeation Analyzer; Filter Integrity Tester; RH sensor Calibrator Designed, built, and supported by InstruQuest Inc. Universal pycnometer, no
More informationPMI Advanced Automated. Pulse Decay Permeameter APDP-10K-HP-101. Not just products... Solutions!
PMI Advanced Automated Pulse Decay Permeameter APDP-10K-HP-101 Not just products... Solutions! DESCRIPTION The PMI s Advanced automated pulse decay Permeameter is used to measure gas permeability of samples
More informationTraceability and Evidential Breath Analyser
Traceability and Evidential Breath Analyser M. MONTAMAT Laboratoire National d Essais, Centre de Métrologie et Instrumentation Chef de la Division Métrologie Chimique. Since many years, we are using hydroalcoholic
More informationSPE Coiled Tubing in High-pressure Wells. Well Control Considerations. Introduction
Society of Petroleum Engineers SPE 24793 Coiled Tubing in High-pressure Wells K.R. Newman and M.G. Allcorn, Dowel1 Schlumberger SPE Members Copyright 1992, Society of Petroleum Engineers Inc. This paper
More informationFILTER BYPASS CONTROL
Differential Control Valve Series 110 The Series 110 Differential Control Valve is designed to accurately control the pressure difference between any two points. In some systems this means the valve remains
More informationMax. working pressure 3650 bar / 52,200 psi Max. flow up to 50 liters / minute Fully made of stainless steel I N N OVATO R S T H E O U R
O U R T H E C O M M I N N OVATO R S i S U C C E S S! I TM E N T, YO U R PORTABLE HIGH PRESSURE POWERPACk Max. working pressure 3650 bar / 52,200 psi Max. flow up to 50 liters / minute Fully made of stainless
More informationMET-101 Introduction to Metrology
Pasig city Tel: 654-13-42 MET-101 Introduction to Metrology This 2-day course offers a basic introduction into Metrology, meant for people who are working in calibration and testing labs, maintenance services
More informationGFM. Typical Aluminum GFM Mass Flow Meter NIST MASS FLOW METERS. Principles of Operation. Design Features
Design Features Rigid metallic construction. Maximum pressure of 1000 psig (70 bars). Leak integrity 1 x 10-7 of helium. NIST traceable certification. Built-in tiltable LCD readout. 0-5 Vdc and 4-20 ma
More informationThe Next Generation. Pulse Duplicator HDT-500. Medical Device Testing & Equipment Simulation Platforms Silicone Vessels
The Next Generation Pulse Duplicator HDT-500 Medical Device Testing & Equipment Simulation Platforms Silicone Vessels Backed by nearly 40 years of experience, the next generation pulse duplicator/pulsatile
More informationR&A Rules Limited and United States Golf Association
R&A Rules Limited and United States Golf Association Interim Procedure for Measuring the Coefficient of Restitution of an Iron Clubhead Relative to a Baseline Plate Revision 1.3 January 1, 2006 IronSLEProcRev1.3_1-06.doc
More informationCapillary Flow Porometer/Frazier/C-522 CFP-1100AEX-F-C522
Capillary Porometer/Frazier/C-522 CFP-1100AEX-F-C522 Not just products...solutions! PRINCIPLE (CFP) A wetting liquid is allowed to spontaneously fill the pores in the sample and a nonreacting gas is allowed
More informationFPG8601 Force Balanced Piston Gauge
FPG8601 Force Balanced Piston Gauge Reference Level Calibration System for very low pressure Pressure range: 0 to 15 kpa gauge, absolute and absolute differential Standard resolution: 0.010 Pa, high resolution
More informationHydraulic comparison test pump Models CPP1000-X, CPP1600-X
Calibration Hydraulic comparison test pump Models CPP1000-X, CPP1600-X WIKA data sheet CT 91.12 for further approvals see page 2 Applications Calibration service companies and service industry Maintenance
More informationUNIVERSAL MASK TEST SYSTEM
f UNIVERSAL MASK TEST SYSTEM Quotation #110811 Automated Motion Inc. 225 NW Victoria Drive Lee s Summit, Missouri 64086-4709 www.automatedmotion.com SYSTEM OVERVIEW AMI s Universal Mask Test System is
More informationINTERMEDIATE CASING SELECTION FOR COLLAPSE, BURST AND AXIAL DESIGN FACTOR LOADS EXERCISE
INTERMEDIATE CASING SELECTION FOR COLLAPSE, BURST AND AXIAL DESIGN FACTOR LOADS EXERCISE Instructions Use the example well data from this document or the powerpoint notes handout to complete the following
More informationTECHNICAL REPORT. TB Series Ball Valve. Report No: ILDTR Revision: 0 Total Pages: 19 Date: 14/02/12
TB Series Ball Valve TECHNICAL REPORT 1 TABLE OF CONTENTS 1.0 Introduction 1.1 Scope 1.2 References 1.3 Test Specimen Description 1.4 Summary 2.0 Test Procedures and Results 2.1 Test 1 - Hydrostatic Strength
More informationDFX II Series. Digital Force Gauge
DFX II Series Digital Force Gauge Functions and Features Simple Operation User friendly four button operation for; Peak, Units, Zero and Info. PEAK- change from Normal to Peak mode UNITS- select desired
More informationHydraulic hand spindle pump Models CPP1000-M, CPP1000-L
Calibration Hydraulic hand spindle pump Models CPP1000-M, CPP1000-L WIKA data sheet CT 91.05 for further approvals see page 2 Applications Calibration service companies and service industry Calibrations
More informationSurveying Fundamentals and Practices, 5/e
Online Instructor s Manual to accompany Surveying Fundamentals and Practices, 5/e Jerry Nathanson Michael T. Lanzafama Philip Kissam Upper Saddle River, New Jersey Columbus, Ohio Copyright 2010 by Pearson
More informationHydraulic hand test pump Models CPP700-H and CPP1000-H
Calibration technology Hydraulic hand test pump Models CPP700-H and CPP1000-H WIKA data sheet CT 91.07 for further approvals see page 2 Applications Simple test pressure generation on site, in the laboratory
More informationSECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
More information159 mm 154 mm. Subject to changes 10/2012
Low-pressure calibrator LPX calibrator medium: air / up to 10 bar KELLER pressure calibrators are highly accurate calibration instruments which are available for the following pressure ranges: -0,85 10
More informationISO 4081 INTERNATIONAL STANDARD. Rubber hoses and tubing for cooling systems for internal-combustion engines Specification
Provläsningsexemplar / Preview INTERNATIONAL STANDARD ISO 4081 Third edition 2010-06-01 Rubber hoses and tubing for cooling systems for internal-combustion engines Specification Tubes et tuyaux en caoutchouc
More informationTEST FOR STABILOMETER VALUE OF BITUMINOUS MIXTURES
Test Procedure for TEST FOR STABILOMETER VALUE OF BITUMINOUS MIXTURES TxDOT Designation: Tex-208-F Effective Date: February 2005 1. SCOPE 1.1 Use this test method to determine the Hveem stability value
More informationCalibration Gas Instrument INSTRUCTION MANUAL. Release I. Advanced Calibration Designs, Inc.
Advanced Calibration Designs, Inc. Calibration Gas Instrument INSTRUCTION MANUAL Release I www.goacd.com Instruction Manual Gas Generator Release I TABLE OF CONTENTS I. General Description Page 2 II. Start-Up
More informationCITY OF JOPLIN, MISSOURI
CITY OF JOPLIN, MISSOURI 2016-RFP-17 REQUEST FOR BID INDOOR GOLF SIMULATOR CITY OF JOPLIN, MO SCHIFFERDECKER GOLF COURSE 506 SCHIFFERDECKER JOPLIN, MO 64801 NOTICE TO BIDDERS The City of Joplin, Missouri
More informationCONTROL VALVE TESTING
The optimal functioning of the Control valve not only exists of sufficient body & seat tightness, but more important, the total "performance" of the valve and its controls! For an accurate and reliable
More informationSPECIFICATION FOR RAISED PAVEMENT MARKERS
SPECIFICATION FOR RAISED PAVEMENT MARKERS 1. SCOPE This specification covers performance requirements of retroreflective and nonretroreflective raised pavement markers which are bonded directly to the
More informationFLOW COMPONENT TESTING FACILITIES API SAFETY VALVE VALIDATION TESTING
FLOW COMPONENT TESTING FACILITIES API SAFETY VALVE VALIDATION TESTING ID-08-FCTF 1 of 7 Revision 1 API SAFETY VALVE VALIDATION TESTING SOUTHWEST RESEARCH INSTITUTE (SwRI ) FLOW COMPONENT TESTING FACILITIES
More informationCoda cx1 Thermal Cycle Test Procedure
Coda cx1 Thermal Cycle Test Procedure CDL 1-TP07-0200:0209 MIT Ref. 85-01050.04 Revision 2.0 8 th June 2004 CDL 1-TP07-0200:0209 Contents 1 Introduction... 1 1.1 Activity Description... 1 2 Requirements...
More informationAUTOMATIC HOSE TEST UNIT, TYPE SPU
VALVES AND FITTINGS UP TO 14,000 BAR TEST AND CONTROL EQUIPMENT H IGH PRESSURE TECHNOLOGY AUTOMATIC HOSE TEST UNIT, TYPE SPU Pressure range from 1 up to 10,000 bar User-friendly touch panel operation HIGH-PRESSURE
More informationRequirements for the certification of movements and mechanical watches resistant to magnetic fields of 1.5 T ( G)
Institut fédéral de métrologie METAS METAS-N001/EN Requirements for the certification of movements and mechanical watches resistant to magnetic fields of 1.5 T (15 000 G) This document is a translation
More informationThe Extremely Large Telescope
The Extremely Large Telescope Why Chile? Excellent conditions in the Atacama Desert Extremely dry 90% clean sky Low turbulence Excellent vision to the Southern Hemisphere (Paranal) (Chajnantor) Poor site
More information