Application for Approval of Additional Equipment
|
|
- Mae McDowell
- 6 years ago
- Views:
Transcription
1 Australian SKUD (Daniel Fitzgibbon and Rachael Cox) Address 9 Mark St New Farm, 4005 Telephone movinrmc@gmail.com SKUD 18 Hull / Sail No. AUS 025 Relationship to control points Rope cross bar (Rope dash) To allow the crew to easily reach all control lines and sheets for sails. All sheets/ lines are directed towards to the cross bar after passing through the control points in the boat. After all control points 730mm length across beam of hollow aluminium cross section 100mm X 20mm. The cross bar is made of a hollow aluminium section as above with track cars fixed to each end. All cleats for controlling lines and sheets are fixed on top of the cross bar positioned back towards the crew. The cross bar is fitted in the boat via Ronstan tracks fixed on both the port and starboard side of the boat, with cars fixed on each end of the cross bar siding into the tracks fitted. The cross bar can be moved fore and aft within the boat in between races (not under load) One-Off Application Number 51_D Fitzgibbon Date Received July 28, 2008 Approved Yes No Date Approved / Declined July 31, 2008 Date Applicant Advised July 31, 2008 Date Posted to Website July 31, 2008 Meets class rules requirements. All after control points.
2
3 Address Amy Kelehan 6, Rocklands, Harbour Rd., Dalkey, Co. Dublin, Ireland Telephone SKUD 18 Hull / Sail No. Relationship to control points amykelehan@yahoo.com IRL027 Helm seat Tilting platform (as made by G.H.) + risers, kartseat + bolster Riser = 100mm; bolster = 120mm Riser = aluminium; bolster = wood Tracks No * One-Off Production n/a Bolster raises rear of seat to less than 120mm above pivot point Application Number 52_A Kelehan Date Received August 11, 2008 Approved Yes No Date Approved / Declined August 11, 2008 Date Applicant Advised August 11, 2008 Date Posted to Website August 11, 2008 Known design. Will be inspected in Qingdao
4
5 Address Carl-Gustaf Fresk Edouard von Horns v. 5, Stocksund Telephone SKUD 18 Hull / Sail No. SWE 013 Relationship to control points - Automatic steering of kanting seat A sensor that can tell the angle of heel of the boat, controls the actuator and keeps the seat upright automatically. The system is also equipped with a manual override. Control box: 350x150x100 mm Plastic, electrical components. Straps Yes One-Off? Production // Two for now Application Number 53_G Fresk_ Date Received August 23, 2008 Approved Yes No Date Approved / Declined May 18, 2010 Date Applicant Advised May 18, 2010 Date Posted to Website May 18, 2010
6 Carl-Gustaf Fresk Address Edouard von Horns v. 5 Telephone swe@transit.se SKUD 18 Hull / Sail No. SWE 013 Relationship to control points - Gennaker tunnel cover. A cover over the gennaker tunnel in the bow. 40 x 80 cm Sailcloth Bolts, tape and shockcord No x One-Off - Production Application Number 54_G Fresk_ Date Received August 23, 2008 Approved Yes No Date Approved / Declined May 18, 2010 Date Applicant Advised May 18, 2010 Date Posted to Website May 18, 2010
7 Australian SKUD Address 9 Mark St New Farm, 4005 Telephone movinrmc@gmail.com SKUD 18 Hull / Sail No. AUS 025 Cunningham adjustment To allow the crew to easily reach and control the cunningham adjustment on the mainsail. The system is continuous with an adjustment point on each side of the rope dash, to allow the crew to easily adjust the cunningham whilst on either port or starboard tack. As the crew has only one full strength arm (left) to pull on all adjustments for sails, this modification was required to facilitate accurate trimming. Relationship to control points Currently set up as a double pulley system on each side of mainsail leading down to the control point in the sub cockpit floor. 3 ml rope and small Ronstan pulleys. The cunningham is threaded through a series of pulleys from the port to the starboard side of the boat. The purchase in the system is 8:1 (4:1 on each side of the mainsail) leading down to the control point in the sub cockpit floor. N/A One-Off This system was added for the crew to be able to effective trim the sail in conditions over 10knots. As all the crews strength is the left side of her body (paralysis on the right hand side including right arm) it is necessary to be able to trim from both port and starboard side of the boat, when on either port or starboard tack. Application Number 55_D Fitzgibbon_ Date Received August 26, 2008 Approved Yes No
8 Date Approved / Declined May 18, 2010 Date Applicant Advised May 18, 2010 Date Posted to Website May 18, 2010 The Cunningham can have no more than 4:1 purchase inside the control point
9 JP Creignou Address 134 Riviera Way NE, St. Petersburg FL Telephone SKUD 18 Hull / Sail No. 004 Relationship to control points Steering arms Connect rudders and steering levers with rods for direct control N/A 6 foot tubes (X2) Aluminum L bracket and tubes L brackets bolted to rudder head. Tubes with quick release pins at lever end. Quick release pins on steering levers. X One-Off N/A Production There is no change to rudders shape, mounting or tie-rod Application Number 56_JP Creignou_ Date Received January 21, 2010 Approved Yes No Date Approved / Declined May 18, 2010 Date Applicant Advised May 18, 2010 Date Posted to Website May 18, 2010
10
11 Address Alexandra Rickham 35 Pitt Place, Church Street, Epsom, Surrey KT17 4PY Telephone SKUD 18 Hull / Sail No. Relationship to control points ahrickham@yahoo.com GBR45 Steering system Push/pull steering system with aluminium rods rather than the previous system with rope better for Alexandra s level of disability. direct Aluminium rods and plates welded to the existing system Welding Easily removable with quick release pins in place r One-Off - Production The photos show everything. Application Number 57_ Date Received May 24, 2010 Approved Yes No Date Approved / Declined May 24, 2010 Date Applicant Advised May 26, 2010 Date Posted to Website May 26, 2010
12
13 JP Creignou Address 134 Riviera Way NE, St. Petersburg, FL Telephone SKUD 18 Hull / Sail No. 051 Relationship to control points Adjustable spinnaker tack line. Adjust the length of the Spinnaker tack line to optimize trimming of sail No control point currently defined 14 ft long 4mm spectra line and off the shelf cam cleat or V cleat Line starts at tack of spinnaker run inside the pole with knot at 36.4 inches then run back to cleat. End of line tied for safety. A floating block may be used at end of tack line for 2:1 purchase No One-Off Production Off the shelf line and cleat It is the same as current system with addition of a cleat for adjustment Application Number Date Received November 4, 2010 Approved Yes No Date Approved / Declined November 4, 2010 Date Applicant Advised December 2, 2010 Date Posted to Website December 2, 2010 simple addition of a cleat rather than securing to the post allowing the sailor to set as needed like other sails
14 Address Access Sailing Systems Pty Ltd 2/7 Bungaleen Court, Dandenong South VIC 3175 AUSTRALIA Telephone SKUD 18 Hull / Sail No. chris@accessdinghy.org All Relationship to control points Servo Mainsheet & Jibsheet Winches Battery powered winches for main and jib sheets mounted on console bolted to aft face of cowling Outside control points 300mmW x 200mmD x 220mmH approx. Jib Winch 1.5kg. Main winch 3.5kg. Batteries (if not powered from seat pack) 5kg. Switch controller 0.5kg. Control box 0.5kg. Stainless steel Fixed to underside of cleat console Designed to remain fixed in the boat whilst on the water. Crew movement is not impeded One-Off Production (small quantities) Access Sailing Systems, Australia. See attached PDF Application Number 59 Access Sailing Date Received November 4, 2010 Approved Yes No Date Approved / Declined November 4, 2010 Date Applicant Advised December 2, 2010 Date Posted to Website December 2, 2010
15
16 JP Creignou Address 134 Riviera Way NE St Petersburg FL, Telephone SKUD 18 Hull / Sail No. USA 004 Relationship to control points Canting seat with side guards and locking cleats The seat can rotate around a pivot point to maintain vertical body angle as the boat heels. Tilting angle is controlled manually. N/A Seat width and length as per class rules. Backrest and sides as per class rules. Overall seat height is under 450 mm Aluminum base bolted in original tracks. Molded plastic seat with supporting aluminum frame is mounted on base. Cleats and blocks are used to lock seat in position. Base bolted to existing tracks. Seat is bolted to base 4 bolts with wing nuts allows for easy removal. X One-Off Production Base Only: Gene Hinkle/JTR enterprises lines and cleats are used to lock the seat at a fix angle. Seat belt is attached to the back of the seat Application Number Date Received December 2, 2010 Approved Yes No Date Approved / Declined April 2, 2011 Meets July 2011 Rules Date Applicant Advised April 2, 2011 Date Posted to Website April 2, 2011
17
Application for Approval of Additional Equipment
Application for Approval of Additional Equipment Applicant to complete Applicant s Name Address Telephone Email SKUD 18 Hull / Sail No. Access Sailing Systems Pty Ltd 2/7 Bungaleen Court, Dandenong South
More informationApplication for Approval of Additional Equipment
Application for Approval of Additional Equipment Applicant to complete Address Lindsay Mason and Ame Barnbrook 14 Old Berowra Rd, Hornsby, Australia Telephone +61 2 9940 3914 lmason2@optusnet.com.au SKUD
More informationApplication for Approval of Additional Equipment
Application for Approval of Additional Equipment (Revised November 2013) ( Select One) 1. Crew Equipment Application 2. Equipment Repair Application 3. New Equipment Application (NEW) Applicant to complete
More informationApplication for Approval of Additional Equipment
Application for Approval of Additional Equipment (Revised November 2013) ( Select One) 1. Crew Equipment Application 2. Equipment Repair Application 3. New Equipment Application (NEW) Applicant to complete
More informationASSEMBLY MANUAL HOBIE CATSY
ASSEMBLY MANUAL HOBIE CATSY HOBIE CAT EUROPE ZI Toulon Est, BP 50 8078 Toulon cedex 9, France Tel : + (0)9 08 78 78 - Fax : + (0)9 08 99 Email : hobiecat@hobie-cat.net - http://www.hobie-cat.net ASSEMBLY
More informationTuning Guide January 2012
Tuning Guide January 2012 www.skud.org This tuning guide has been prepared by the IACA SKUD 18 Committee to assist new sailors in the SKUD 18 class to prepare their MkI or MkII boat to a competitive level
More informationTable of content Introduction 5 1. Part 1. Assembly Tools needed for Assembly Glossary Hulls Mounting the beams 7
Table of content Introduction 5 1. Part 1. Assembly 6 1.1. Tools needed for Assembly 6 1.2. Glossary 6 1.3. Hulls 7 1.3.1. Mounting the beams 7 1.3.2. Fixing the mast rotation cleats 8 1.3.3. Placing the
More information2012-June-12 SECOND DRAFT Hobie Getaway Spinnaker Installation Instructions
SECTION A: INTRODUCTION This unofficial set of installation instructions was written for a 2009 Hobie Getaway, using a 2012 Hobie Spinnaker Kit 20999020. Note from the Author: I had never seen this kit
More informationIndex 1. Trampoline 2. Main Foils 3. Spinnaker Pole 4. Mast Setup 5. Mast Rigging 6. Rig Tension 7. Trapeze Lines 8. Rudders 9. Boom 10. Main Sheet an
By User Manual Index 1. Trampoline 2. Main Foils 3. Spinnaker Pole 4. Mast Setup 5. Mast Rigging 6. Rig Tension 7. Trapeze Lines 8. Rudders 9. Boom 10. Main Sheet and Traveler 11. Main Sail 12. Downhaul
More informationJ/70 Building Specification
DECK, HARDWARE AND FITTINGS 1 FRP Composite deck 2 Indeck furler unit 3 Bow "U" bolt mooring eye (stainless) Option for one 6" (152mm) mooring cleat in lieu of eye. 4 Shroud chainplates (stainless) (BSI
More informationE Manual Self tacking system 30
597-205-E 2015-12-09 Manual Self tacking system 30 1 Self tacking system 30, 443-200-10 A self-tacking jib makes life on board a lot easier, in particular for shorthanded crews. The jib sheet is led to
More informationAn innovative windvane pendulum system for sailing boats with outboard rudders.
An innovative windvane pendulum system for sailing boats with outboard rudders. Jan Alkema 26 sept. 2005 figure 8. The oar blade retracted figure 7. The oar blade in the water Preface On boats with outboard
More informationPaper Tiger Catamaran International Association MEASUREMENT FORM
Paper Tiger Catamaran International Association MEASUREMENT FORM Amended June 2000: July 2002: April 2012 Name of boat: Sail No: Owner s name: Owner s address: Postcode: Phone: (H) (B) (Mob.) Email: Owner
More informationHansa 2.3 Rigging Guide
Hansa 2.3 Rigging Guide Manufactured by Hansa Sailing Systems Pty Ltd ABN 56 079 318 031 4/4 Cumberland Avenue SOUTH NOWRA NSW 2541 AUSTRALIA Postal: PO Box 5048 NOWRA DC NSW 2541 Telephone: +61 2 4403
More informationOWNER S MANUAL OWNER'S MANUAL TABLE OF CONTENT. 1. Introduction. 2. EC Documentation a) Certificate of homologation b) Declaration of conformity
OWNER'S MANUAL TABLE OF CONTENT 1. Introduction 2. EC Documentation a) Certificate of homologation b) Declaration of conformity 3. Description a) Hull identification b) Design category c) Technical data
More information[ ] 10 YEAR HULL WARRANTY [ ] GEL COAT: [ ] RESIN: [ ] FIBERGLASS [ ] VACUUM BAGGING:
Progression 22 This list is provided to help you to evaluate the many advantages that come STANDARD with a PROGRESSION 22. As you compare Progression s many superior features to the competition, it will
More informationRaider 16/Sport - Spinnaker Rigging. Rigging Spinnaker
Rigging Spinnaker Step 1: Run the spinnaker halyard (minimum 52' in length) through the block then back down the mast. Step the mast as you normally would. Step 2: Temporally tie one end of the spinnaker
More informationAccess Dinghies LIBERTY OPERATIONS & SAFETY MANUAL. Page 1
Access Dinghies OPERATIONS & SAFETY MANUAL LIBERTY Page 1 Items included with your Liberty 1. Liberty 11. Foresail (Jib) 2. Main Mast 12. Bobbin 3. Fore Mast 13. Mainsheet 4. Boom 14. Outhaul 5. Centreboard
More informationSHIELDS PARTS PRICE SHEET
7 Narrows Road * P.O. Box 152 * Wareham, MA 02571-0152 * Phone (508) 295-3550 * Fax (508) 295-3551 www.capecodshipbuilding.com * info@capecodshipbuilding.com SHIELDS PARTS PRICE SHEET Part Number DESCRIPTION
More informationGeneral Specifications
General Specifications LOA 10.88 M Beam 3.64 M Draft 2.00 M Disp. 4,839 Kg P 14.80 M E 4.80 M I 14.35 M J 4.25 M Genoa 33.50 M² Mainsail 45.50 M² Gennaker 128.00 M² Design REICHEL/PUGH www.reichel-pugh.com
More informationHANSA 303 CLASS RULES. Effective from April The Hansa 303 was designed in 1998 by Chris Mitchell
HANSA 303 CLASS RULES Effective from April 2016 The Hansa 303 was designed in 1998 by Chris Mitchell INDEX PART I ADMINISTRATION Section A General A.1 Language... 4 A.2 Abbreviations... 4 A.3 Authorities...
More informationTable of content Introduction 5 1. Part 1. Assembly 6 1.1. Tools needed for Assembly 6 1.2. Glossary 6 1.3. Hulls 7 1.3.1. Mounting the beams 7 1.3.2. Fixing the mast rotation cleats 8 1.3.3. Mounting
More informationIt allows you to. is the Best Option. More information at
Document - 17AIO Launch and Retrieve by yourself without getting your partner wet Copyright C Release & Retrieve Boat Latch Pty Ltd, 2016 and "L-&-R" is a Trademark of Release & Retrieve Boat Latch Pty
More informationM32 CATAMARAN ASSEMBLY MANUAL
M32 CATAMARAN ASSEMBLY MANUAL 1 M32 CATAMARAN ASSEMBLY MANUAL MANUAL SUMMARY M32 ASSEMBLY Parts and tools Instructions MAST PLATFORM Parts and tools Instructions MAST STEPPING Instructions MAIN HALYARD
More informationCR 914 Class Rules. Revised July 15, 2000 See also CR-914 Class Rule Interpretations
CR 914 Class Rules Revised July 15, 2000 See also CR-914 Class Rule Interpretations 1 GENERAL - CLASS: The CR 914 is a One-Design class. The Class objective is that the sailing skills of the skipper shall
More informationHANSA 2.3 CLASS RULES. Effective from April The Hansa 2.3 was designed in 1992 by Chris Mitchell
HANSA 2.3 CLASS RULES Effective from April 2016 The Hansa 2.3 was designed in 1992 by Chris Mitchell INDEX PART I ADMINISTRATION Section A General A.1 Language... 4 A.2 Abbreviations... 4 A.3 Authorities...
More informationTopaz OMEGA Rigging Instructions
Topaz OMEGA Rigging Instructions www.toppersailboats.com TOPAZ OMEGA RIGGING INSTRUCTIONS CONTENTS 02. Introduction 02. Manufacturers Details 03. Maintenance 04. Raising the Mast 05. Attaching the Boom
More informationBladerider X8 Assembly Help Notes
2.1 Remove All Parts & Have Some Tools Handy Remove all items from the box and identify each part as per the packing sheet and check that nothing is missing. If there is something missing, please email
More informationSanibel Owners Manual
Sanibel 36-600 Owners Manual TM Specifications Length (Hull):... 36 inches Height (Mast):... 51.5 inches Height (Overall):... 69 inches Beam:... 7.5 inches Radio: JR Beat Gear w/sail winch servo Sail area:
More informationWeta Basic Rigging Guide
Weta Basic Rigging Guide A quick reference guide of how to rig your Weta, with some tips to make rigging quick and easy! For a more indepth guide see our Weta Manual under Weta Owners on the website. 1.
More informationT 10 Tacking Ver
T 10 Tacking Assume sailing upwind in moderate conditions Ensure Jib sheets are clear both in the cockpit and forward. Ensure new course is clear of other boats, shipping, and navigation hazards. Ensure
More informationInternational J/24 Class Rules Changes As approved by ISAF Effective 1 st April 2013
Class Rule 3.2.5 International J/24 Class 2012-13 Rules Changes As approved by ISAF Effective 1 st April 2013 The deck shall be fitted with two stanchions on each side, port and starboard, as detailed
More informationCLASS RULES 2014 EFFECTIVE JANUARY The SKUD 18 was designed in 2005 by Chris Mitchell.
CLASS RULES 2014 EFFECTIVE JANUARY 2014 The SKUD 18 was designed in 2005 by Chris Mitchell. INDEX PART I ADMINISTRATION Section A General A.1 Language 4 A.2 Abbreviations 4 A.3 Authorities 4 A.4 Administration
More informationaero naut Order No. 3009/00
aero naut Order No. 3009/00 Introduction: The model should be assembled following the sequence of the stages of construction described in these instructions. The laser-cut components are individually numbered.
More informationFARR 280-SPECIFICATION
FARR 280-SPECIFICATION Page 1 of 5 Specifications Length Overall Length Waterline Beam Keel Draft Displacement Keel Weight 8.72 m / 28.6 ft. 8.02 m / 26.3 ft. 2.87 m / 9.4 ft. 2.1 m / 6.89 ft. 1600 kg
More informationProgression 24LD Stern Drive
Progression 24LD Stern Drive This list is provided to help you to evaluate the many advantages that come STANDARD with a PROGRESSION 24LD. As you compare Progression s many superior features to the competition,
More informationRudder Kit Assembly Instructions for Quest 13
Rudder Kit Assembly Instructions for Quest 13 Revised 4/2/2015 78501 Rudder System The Hobie Quest is designed for the addition of an optional rudder system. Rudder systems in boats like this allow you
More informationAUSTRALIAN ARROW AND ARAFURA CADET ASSOCIATION ARROW CATAMARAN RESTRICTIONS AND MEASUREMENT CERTIFICATE
AUSTRALIAN ARROW AND ARAFURA CADET ASSOCIATION ARROW CATAMARAN RESTRICTIONS AND MEASUREMENT CERTIFICATE 1 NOTE: The object of these restrictions is to provide uniform specifications and restrictions for
More informationPico rigging manual 2007.doc Page 1 of 28
Pico rigging manual 2007.doc Page 1 of 28 Pico Rigging Instructions The Pico rigging instructions are a guide to rigging your boat. Due to production supplies certain parts may be slightly modified from
More informationTUNE YOUR SAILS SPEED
TUNE YOUR SAILS FOR OUTRIGHT SPEED Rev R05 Important Notes l We recommend not exceeding 350lbs total crew weight as this puts excess stress on the mast and the boat. l When sailing, the boat performs best
More informationINTERNATIONAL. 29er CLASS RULES. The 29er Class was designed in 1997 by Julian Bethwaite and was adopted as an ISAF International Class in 2001.
INTERNATIONAL 29er CLASS RULES 2015 The 29er Class was designed in 1997 by Julian Bethwaite and was adopted as an ISAF International Class in 2001. INDEX PART I ADMINISTRATION Section A General A.1 Language...
More informationLITTLE TRI construction
LITTLE TRI construction I have built almost anything that can sail. At the age of 12 my first sail thing, an ice boat. I used skates which had to be mounted on shoes as runners. Big fun, very fast, only
More informationQUALITY ALUMINUM BOAT LIFTS, INC. INSTRUCTIONS. Dominator Lake Lift
INSTRUCTIONS Dominator Lake Lift PHONE:251-986-3882 * FAX:251-986-3136 QABLDOMINATORINST.2014 P a g e 1 Quality Aluminum Boat Lifts, INC. Installation Instructions: Dominator Lake Lift Thank you for your
More information2. Note that the ropes from the rigging board are secured in the cam cleats of the jib fairleads.
VII 1. Place the hull, bow into wind, on its trailer, a soft surface, or a rigging board. We strongly recommend making a rigging board; it is simple and inexpensive and greatly simplifies rigging and working
More informationRIGGING INSTRUCTIONS Let's assume that you have your boat on a trailer when you take delivery from your dealer.
This is the original owner's manual, written about 1972, and applicable for boats manufactured through 1978. Starting in 1979 a few changes were made in the roller furling jib and forestay arrangement.
More informationStand-N-Fish FULL DETAIL INSTALLATION INSTRUCTIONS
1 Stand-N-Fish FULL DETAIL INSTALLATION INSTRUCTIONS Thank you for purchasing the incredible new Stand-N-Fish Kayak Fishing System. Once installed on your kayak the Stand-N-Fish will take your kayak fishing
More informationIndex All you need to know
Index All you need to know We uphold the right of outboard motor boats to have a distinctive character and create a bond with the owner Versatile Quality Performance Space Safety Options and Equipment
More informationParts of the Ship. Terms you should already know
Parts of the Ship Toronto Brigantine Terms you should already know After-peak Fore-peak Bow Stern Fairlead Scupper Freeing port Hull Deck Lifeline Hatch Skylight Cleat Pin-rail Fife-rail Spider-band Block
More informationETCHELLS RIG SET UP FOR PC-M/PC+/BF MAIN, DC270/GM JIBS,.5oz VMG, FULL RADIAL and.5oz/.75oz BIRADIAL SPINNAKERS
ETCHELLS RIG SET UP FOR PC-M/PC+/BF MAIN, DC270/GM JIBS,.5oz VMG, FULL RADIAL and.5oz/.75oz BIRADIAL SPINNAKERS 1. MAST STEP Jan 2008 5.360mtrs measured from the transom/deck intersection to the aft edge
More informationBasic Keelboat Sailing Standard (ASA 101)
Basic Keelboat Sailing Standard (ASA 101) Prerequisites: None General Description: Description: Demonstrated ability to skipper a sloop-rigged keelboat of approximately 20 to 27 feet in length by day in
More informationCOASTAL IN-BOOM FURLING SYSTEM. Installation Manual
COASTAL IN-BOOM FURLING SYSTEM Installation Manual 1 TABLE OF CONTENTS Page Number 3. Disclaimer 4. Components packing list & required tools 5. Gooseneck bracket location 6. Installation sail track 7.
More informationSPARE PARTS WORKBOOK
SPARE PARTS WORKBOOK Hull Parts - Bow Area 0 0 RS Feva Foredeck FEV-HF-00 Pozzi pan screw x / FIX-S-P0 Washer M 'A' FIX-W-00 00mm Black Dacron Patch ZDP00 Allen Hatch Inch: Sealing Ring A Pozzi pan screw
More information3. Sail Kit. Table of Contents: Portland Pudgy Safety Dinghy: 3. Sail Kit
Table of Contents: 3. Sail Kit Sailing the Portland Pudgy... 1 Sailing Tips... 1 Reducing the Sail Area (Reefing the Sail)... 2 Method 1. Reducing Sail without the Exposure Canopy... 2 Method 2. Reducing
More information1 Tuning Platform Reseating Beam Pads Rudder alignment Noisy Foils Rig Tension...
Contents 1 Tuning... 2 1.1 Platform... 2 1.2 Reseating Beam Pads... 2 1.3 Rudder alignment... 3 1.4 Noisy Foils... 3 1.5 Rig Tension... 4 1.6 Mast rake... 4 1.7 Spreader rake... 5 1.8 Diamond tension...
More informationThe Basics of Victory Sailing II
The Basics of Victory Sailing II Torrey Pines Sailing Club Sailing from Island Palms Marina on Shelter Island San Diego, CA Visit us at our web site 1 Boating Safety Safety First Life jacket Suntan lotion
More informationODOM CLASS SPECIFICATIONS
ODOM CLASS SPECIFICATIONS Effective March 1, 2004 1. GENERAL 1.1 Purpose of the Measurement Rules 1.1.1 The ODOM is a One-Design Class as defined by the American Model Yachting Association (AMYA). However,
More informationSail No: Hansa 2.3 Owner s Manual
Sail No: Hansa 2.3 Owner s Manual Manufactured by Hansa Sailing Systems Pty Ltd ABN 56 079 318 031 4/4 Cumberland Avenue SOUTH NOWRA NSW 2541 AUSTRALIA Postal: PO Box 5048 NOWRA DC NSW 2541 Telephone:
More informationAnnex E(M) - Final inspection checklist - monowheel
Annex E(M) - Final inspection checklist - monowheel A/C Reg... Owner...Kit S/N...Date... (U.K. Only) L.A.A No...Inspector...Insp. No... Note: This check list only covers specific items for inspection of
More informationMelges 24 Sailing Guide
RACING GUIDES www.ullmansails.com Upwind Sailing Melges 24 Sailing Guide The Melges is most efficient when sailed as flat as possible. Excessive heel causes leeway which is slow. The skipper must work
More informationSchock Harbor 25 Sempre Amici
Schock Harbor 25 Sempre Amici Make: Schock Model: Harbor 25 Length: 25 ft Price: $ 62,000 Year: 2009 Condition: Used Location: Seattle, WA, United States Boat Name: Hull Material: Draft: Number of Engines:
More informationOPERATIONAL CHECK LIST
www.spinnakersailing.com (650) 363-1390 OPERATIONAL CHECK LIST https://twitter.com/#!/spinnakersailin http://www.facebook.com/spinnakersailingrwc http://www.spinnakersailing.com/newsletter.html Dear Sailor,
More informationSTANDARD SPECIFICATIONS
STANDARD & OPTIONS SPECIFICATIONS January 2018 STANDARD SPECIFICATIONS TECHNICAL DATA Length: 5,55 m Width: 2,38 m Light displacement: 500 kg Mainsail area: 14,5 m2 Jib area: 9,2 m2 Gennaker area: 32 m2
More informationNo.5550 INTRUCTION MANUAL WARRANTY WARNING. Notice This is not a toy. Assembly and operating of this boat requires adult supervision.
INTRUCTION MANUAL WARRANTY Thunder Tiger guarantees this model kit to be free from defects in both material and workmanship. The total monetary value under warrant will in no case exceed the cost of the
More informationSonar Tuning Guide. Jud Smith Tomas Hornos Send order forms to:
Sonar Tuning Guide Jud Smith jsmith@doylesails Tomas Hornos tomas@doylesails.com Send order forms to: onedesign@doylesails..com Rig Tune We recommend checking your shroud tuning before going sailing. Start
More informationSAIL WELL, STAY WELL. Sydney Flying Squadron ACN Sydney Flying Squadron. SAILING A SKIFF a guide
Historic 18 foot Myra Too Sydney Flying Squadron ACN 000 487 230 76 McDougall Street Milsons Point. 2061 SAIL WELL, STAY WELL SAILING A SKIFF a guide PO Box 577 Milsons Point 2061 T: 9955 8350 Web: sydneyflyingsquadron.com.au
More information"Queenie" - Tofinou 9.5
"Queenie" - Tofinou 9.5 Location Ipswich, United Kingdom Build Dimensions Price: 65,000 Length: 9.5m / 31.17ft Year: 2004 Beam: 2.45 meter Builder: Latitude 46 Max Draft: 2.2 meter Construction: GRP Keel
More informationFitting Instructions For Slab Reefing Kit Part No For Yachts Up To 8.5m (2 Reefing Points)
Fitting Instructions For Slab Reefing Kit Part No 41483 For Yachts Up To 8.5m (2 Reefing Points) This system makes reefing your mainsail a quick and easy operation. Just lower the mainsail just below a
More informationA Basic Guide to Europe Dinghy Rigging
The Basics: A Basic Guide to Europe Dinghy Rigging Use the smallest blocks available for the line size. Most of the blocks on your boat will be micro blocks. Examine all of your rigging and ensure that
More informationHALCAT. Halcat Association of South Africa CONSTITUTION. 1. NAME The Association shall be known as the Halcat Class Association of South Africa.
1 HALCAT Halcat Association of South Africa CONSTITUTION 1. NAME The Association shall be known as the Halcat Class Association of South Africa. 2. OBJECT To encourage the growth of the Halcat Class, establish
More information5. STRUCTURAL ANALYSIS
5. STRUCTURAL ANALYSIS The skeletal structure of the experiment casing is constructed from UNISTRUT with all experiment equipment mounted by UNISTRUT provided fasteners. All maximum loads for nuts, bolts,
More informationYear: 1970 Heads: 1 Location: Plymouth Cabins: 2 LOA: 32' 0" (9.75m) Berths: 5 Beam: 9' 2" (2.80m) Keel: Long Min Draft: 5' 6" (1.
PLYMOUTH OFFICE OFFICES THROUGHOUT THE UK AND EUROPE Nicholson 32 MKVI Year: 1970 Heads: 1 Location: Plymouth Cabins: 2 LOA: 32' 0" (9.75m) Berths: 5 Beam: 9' 2" (2.80m) Keel: Long Min Draft: 5' 6" (1.67m)
More informationClub 420 Class Rigging Manual
Club 420 Class Rigging Manual Performance sailcraft 2000 Inc 2555 Dollard Lasalle, Quebec, H8N 3A9 Tel: 514 363 5050 email: info @ps2000.ca Website: www.ps2000.ca Mast set up Remove the pole and unwrap
More informationTOFINOU 8.0 M DAYSAILER. Year DIAMOND Yachts, Yachtzentrum Baltic Bay Börn Laboe
TOFINOU 8.0 M DAYSAILER DIAMOND Yachts, Yachtzentrum Baltic Bay Börn 17 24235 Laboe Boat sold Main Info Model Dimensions & Material Tofinou 8.0 m Daysailer Key Facts Exclusive sail inventory by NORTHSails.
More informationIn each step, the needed parts are shown the number right below. Locate all parts for the step.
Tools Required for Assembly Phillips Screwdriver, Med Needle Nose Pliers Sandpaper (#400 grit) Hobby Knife Scissors CA Instant Glue Rubbing Alcohol Drill Bit 1/16", 1.6mm 5/64, 2mm 1/8, 3mm 5/32, 4mm Before
More information12.9 Gennaker. February Setting up and sailing with the 12.9 Gennaker
12.9 Gennaker Setting up and sailing with the 12.9 Gennaker February 2013 The 12.9 Gennaker is a new bigger gennaker for the Weta. The standard gennaker is 8 sqm and the 12.9 gennaker is 12.9 sqm. The
More informationKeel Owners Board / Half Hull Centerboard Owners Board / Half Hull. Tri-Color Masthead Light
Mariner Parts List Mariner Sailboats 40000.000 Mariner Centerboard 50000.000 Mariner Keel Documentation & Awards 47001.000 Mariner Owners Packet 47015.150 Keel Owners Board / Half Hull 47015.250 Centerboard
More informationPRELIMINARY BAVARIA MATCH 35 INT. CLASS RULES
PRELIMINARY BAVARIA MATCH 35 INT. CLASS RULES 2005 The Bavaria Match 35 was designed in 2003 by J&J Design and was adopted as an international/recognised class in 2005xxxx. INDEX PART I ADMINISTRATION
More informationMartin16 Class Rules
Martin16 Class Rules Martin16 Class Rules Ratified July, 2017 Introduction & Overview Every rule of the Martin16 Class Rules applies at all times while a Martin16 is racing. 1. Intent 1.1 Abbreviations
More informationTrogear Bowsprit Through Hull Installation Manual
Trogear Marine Products, LLC www.trogear.com info@trogear.com 866-616-2978 Trogear Bowsprit Through Hull Installation Manual Congratulations on your purchase of the Trogear Bowsprit which can be installed
More informationSafety Afloat. Before you go sailing:
RIGGING MANUAL Safety Afloat This instruction manual is not a guide to sailing your craft and it should not be considered suitable for the task of learning to sail a boat. Please read the manual before
More informationHOBIE TEDDY ASSEMBLY MANUAL
ASSEMBLY MANUAL HOBIE TEDDY HOBIE CAT EUROPE ZI Toulon Est, BP 50 83078 Toulon cedex 9, France Tel : +33 (0)494 08 78 78 - Fax : +33 (0)494 08 3 99 Email : info@hobie-cat.net - http://www.hobie-cat.net
More informationSPARE PARTS WORKBOOK
SPARE PARTS WORKBOOK Hull Parts - Bow Area RS Quba Foredeck QUB-FX-00 RS Feva Mast Gate (Post 0 Hex Head Recess) FEV-HF-00 Button head machine screw M x 0 FIX-B-B0 RS Feva / Quba Mast Gate Fastening Bolt
More informationRigging guide for the Swift Solo Volume 1 (mostly boat rigging)
Rigging guide for the Swift Solo Volume 1 (mostly boat rigging) Thanks to Greg Ryan for the drawing 5/28/2004 1 Index Page 3 Preface and Safety 4 Quick line measurements you ll need 5 Spinnaker pole launcher
More informationRIGGING: RS- Vision. 1. A properly derigged boat appears as below. Please note that the tiller extension is NOT bent.
RIGGING: RS- Vision The RS- Visions should be rigged on the floating dock or on its trailer then put into the water. While rigging, carefully inspect the vessel and equipment to make sure everything is
More informationHobie Island Spinnaker Instructions
Hobie Island Spinnaker Instructions Please read through the instruction manual before using this product. 2 Installation Components 1. 2. 1. Swivel Cam Cleat 2. Mount for Cleat w/ Hardware 3. Padeye w/
More informationAMYA SeaWind Class Rules
AMYA SeaWind Class Rules Revised 4/1/2011 1 GENERAL - CLASS: The SeaWind is a one design class. The class objective is competition where the skill of the skipper in sailing and adjusting his boat will
More informationSEADUCER BOATS GAS MONO COME VISIT US ON THE WEB AT
SEADUCER BOATS GAS MONO COME VISIT US ON THE WEB AT WWW.SEADUCERBOATS.COM 1 - Pkg. Of 440 push rod ends 1 - Pkg. of solder-on rod ends 2 -water outlet fitting 1-1/4" prop nut 1 -.250" x 24" flex shaft
More informationHighlander Specifications
Highlander Specifications July 22, 2012 Highlander Specifications The intent of this section is to clarify and add to what is shown in the official plans. In case of conflict between these specifications
More informationF-27 RIGGING GUIDE EXTRACTED FROM ORIGINAL F-27 SAILING MANUAL
F-27 RIGGING GUIDE EXTRACTED FROM ORIGINAL F-27 SAILING MANUAL By Ian Farrier not be possible if the towing vehicle is a van. When trailering, allow extra distance for stopping. Watch also for low bridges,
More informationFollow these easy steps to properly assemble your new Zim 420
Thank you for buying a Zim 420 and welcome to the Zim Sailing family. We are extremely proud of the quality of our boats and the race results are proven. Many of the top sailors are choosing Zim over other
More informationBoatSmith Wharram Ariki 48 Performance Cruising Catamaran v1 Specifications
BoatSmith Wharram Ariki 48 Performance Cruising Catamaran v1 Specifications David Halladay BoatSmith Inc. info@boatsmithfl.com 561.632.2628 15 March 2013 LOA: 48 ft 2 in BOA: 22 ft LWL: 41 ft 6 in Weight:
More informationThe M242 is a relatively easy boat to sail and the fleet has taken steps to make the boats as even as possible.
Tuning Guide October 2005 Dear M242 Sailors, The M242 is a relatively easy boat to sail and the fleet has taken steps to make the boats as even as possible. This tuning guide was written as a reference
More informationContents 1. Components Introduction Preparation Hull Foredeck Mast Boom...
Rigging Manual V5 Contents 1. Components...1-6 1.1 - Spars...1 1.2 - Rudder pack...1 1.3 - Rigging pack... 2 1.4 - Rope pack... 3 1.5 - Asymmetrical spinnaker pack... 4 1.6 - Symmetrical spinnaker pack...
More informationAMYA SeaWind Class Rules
AMYA SeaWind Class Rules Revised 4/1/2013 1 GENERAL - CLASS: The SeaWind is a one design class. The class objective is competition where the skill of the skipper in sailing and adjusting his boat will
More informationFDR CHRYSLER 16' CATAMARAN (MUSKETEER) The initial rigging of a sailboat is not difficult, but if the boat is strange
Page of 6 Revised 2/0/76 RIGGING INSTRUCTIONS FDR CHRYSLER 6' CATAMARAN (MUSKETEER) The initial rigging of a sailboat is not difficult, but if the boat is strange to the new owner, or the new owner is
More informationGYBE TALKING: A guide to sloop talk
GYBE TALKING: A guide to sloop talk Before coming aboard for your sail, learn some basic vocabulary in sailor language. This will help you connect with your experience! Here s a list of some terms and
More informationHighlander Specifications
Highlander Specifications March 14, 2019 Highlander Specifications The intent of this section is to clarify and add to what is shown in the official plans. In case of conflict between these specifications
More informationANGEL INSTRUCTIONS ALMOST READY TO SAIL MODEL YACHT
ANGEL INSTRUCTIONS ALMOST READY TO SAIL MODEL YACHT Long: 920mm High:1840mm Toatl sail area: 0.4 m2 1 MODEL YACHT ASSEMBLY INSTRUCTIONS & SAILING HINTS Thank you for purchasing one of our range of model
More informationEssential Rig Tuning Guide The Ins and Outs of tuning your mast.
Essential Rig Tuning Guide The Ins and Outs of tuning your mast. Tuning Your Rig The main goal in tuning your mast is to achieve a spar that s straight. By doing this it will help you gain control of sail
More informationPARTS - FORWARD. Kayaking + Fishing Parts & Accessories Hook HATCH SEAL "TRIM-LOC" (TOP MOLDED) 5 REQ
PARTS - FORWARD 72104001 Hook 71301001 HATCH SEAL "TRIM-LOC" (TOP MOLDED) 5 REQ 71302001 HULL FLANGE SEAL (pre 2012 ADV) "TRIM-LOC" (SIDE GLUED) 5 REQ 80012001 Pedal Retainer Bungee w/ Hook 84560001 Mast
More information