MATERIAL SAFETY DATA SHEET PRODUCT : BOMIX CONSTRUCTION SAND

Size: px

Start display at page:

Download "MATERIAL SAFETY DATA SHEET PRODUCT : BOMIX CONSTRUCTION SAND"

Alyson Norton
6 years ago
Views:

1 Page 1 of 5 SECTION 1: PRODUCT INFORMATION PRODUCT: BOMIX CONSTRUCTION SAND CODE: MANUFACTURER: DAUBOIS INC boul. des Grandes Prairies St-Léonard (Québec) H1P 1A5 USE: General purpose sand Supplier: Refer to manufacturer WHMIS classification: D2A SECTION 2: HAZARDOUS INGREDIENTS Hazardous Ingredients # CAS % (w/w) Exposition limit (TLV) (mg/m 3 ) LD50 (route, species) Crystalline silica > N / A SECTION 3: PHYSICAL CHARACTERISTICS Physical state: Appearance and odor: Odor threshold: Density: Vapor pressure: Vapor density: Evaporation rate: Boiling point : Freezing point: ph (solution 10% in water) : Water/oil distribution: Solid Brown sand, no odour. t established

2 Page 2 of 5 SECTION 4: FIRE AND EXPLOSION HAZARDS Flammability: Under what conditions: Extinguishing methods: Flash point (method used): Maximum flammability limits Lower: Upper: Auto-ignition temperature: Dangerous combustion products: Protect from mechanical impact: Protect from static discharge: Use extinguishing method according to surrounding material. ne Chemical stability: Yes If not, under what conditions: Incompatibility with other material: Dangerous decomposition products: ne Polymerization risks: SECTION 5: REACTIVITY SECTION 6: TOXICOLOGICAL PROPERTIES ROUTE OF ENTRY / CONTACT Skin: Inhalation: Ingestion: Exposition limit: Irritating properties: Sensitization: May cause mechanical irritation. May cause skin dryness. Dust may cause respiratory system irritation and breathing difficulties. Prolonged exposition may result in silicosis. May cause gastro-intestinal problems. t available May cause irritation if in contact with eyes, skin or respiratory system. t available

3 Page 3 of 5 SECTION 6 ( CONTINUED ) Carcinogenicity: Toxic effect on reproduction: Teratogenicity: Mutagenicity: Product with synergistic effect: According to IARC, crystalline silica may be a cause for cancer. ne SECTION 7: PREVENTIVE MEASURES INDIVIDUAL EQUIPMENT PROTECTION Gloves: Use regular gloves. Security glasses. Respiratory equipment: Wear a NIOSH approved dust mask. Shoes: Regular. Clothing: Clothes covering the skin. Other: Special technical mechanism: Good ventilation is required. Procedure in case of leaks: Clean with a broom or with a vacuum cleaner avoiding dust formation. Residue elimination: Dispose according to municipal, provincial and federal laws on chemical waste. Handling and equipment methods: special requirements. Storage requirements: special requirements. Special shipping instructions: special requirements. SECTION 8: FIRST AID Skin: Clean with soap and rinse exposed areas. Consult a physician if necessary. Rinse well with water for a minimum of 15 minutes. Consult a physician.

4 Page 4 of 5 SECTION 8: FIRST AID ( CONTINUED ) Inhalation: Ingestion: In case of overexposure, evacuate to fresh air. Consult a physician if necessary. Do not induce vomiting. If victim is conscious, give plenty of water. See a physician. SECTION 9: PREPARATION INFORMATION Prepared by: Technical service Telephone number: (514) or Fax: (514) info@daubois.com

5 Page 5 of 5 * Information on this Safety Data Sheet corresponds to our degree of knowledge at the time of publication. There is no warranty on their accuracy and no responsibility towards their use.

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date:99/09/30 App S.G.

AQ 191 A Page 1 of 5 Sika Canada Inc. MATERIAL SAFETY DATA SHEET Date:99/09/30 App S.G. Page 1 of 5 SECTION I: PRODUCT INFORMATION REVISION DATE: February 15, 2009 USAGE: COLOR PACK FOR SIKAFLEX 2c MANUFACTURER: SIKA CANADA INC. 601, avenue Delmar Pointe Claire, QC H9R 4A9 EMERGENCY TELEPHONE