INACTIVE - MOBIL 1 0W-40

Transcription

1 INACTIVE - MOBIL 1 0W-40 Creation Date: 2015/02/04 Chemical family: Base oil and additives. Product uses: Engine oil. Section 1: PRODUCT INFORMATION Manufacturer: Imperial Oil Products Division 240 4th Avenue S.W. Calgary, Alberta T2P 3M9. Manufacturer emergency phone number: Information phone number: Supplier: Same as manufacturer. TDG classification: Not regulated. WHMIS classification: Not controlled. DSL status: Appears on DSL. Supplier (M)SDS date: 2011/11/11. Revision details: Sections 3 & 4. Product name: Mobil 1 OW-40 Section 2: HAZARDOUS INGREDIENTS C.A.S. CONCENTRATION % Ingredient Name T.L.V. LD/50 LC/50 NO HAZARDOUS INGREDIENTS NOT AVAILABLE NOT AVAILABLE NOT AVAILABLE Physical state: Liquid. Appearance & odor: Amber Characteristic odour. Odor threshold (ppm): Not available. Vapour pressure (mmhg): (estimated). < C Vapour density (air=1): (estimated). > 101 kpa Volatiles (%) By volume: Not available. Evaporation rate (butyl acetate = 1): Not available. Boiling point ( C): (estimated). > 316 C Section 3: PHYSICAL DATA BQ INACTIVE - MOBIL 1 0W-40 1/5

2 Freezing point ( C): Not available. ph: Not available. Specific 20 C: Not available. Solubility in water (%): Negligible. Coefficient of water\oil dist.: Not available. VOC: Not available. Flammability: Not flammable. Section 4: FIRE & EXPLOSION DATA Conditions of flammability: At temperatures at or above flash point. Extinguishing media: Carbon dioxide, dry chemical, foam. Water spray. Do not use water jet. Special procedures: Self-contained breathing apparatus required. Firefighters should wear the usual protective gear. Prevent from entering sewers or waterways. Use water spray to cool fire exposed containers. Evacuate area promptly. Auto-ignition temperature ( C): Not available. Flash point ( C), method: ASTM D92. > 200 C Lower flammability limit (% vol): 0.9 Upper flammability limit (% vol): 7.0 Explosion Data Sensitivity to static discharge: Take precautionary measures against static discharge. Sensitivity to mechanical impact: Not available. Hazardous combustion products: Oxides of carbon (CO, CO2). Smoke Aldehydes. Oxides of sulfur (SOx). Vapours. Incomplete combustion products. Explosive power: Not available. Section 5: REACTIVITY DATA Chemical stability: Stable under normal conditions. Conditions of instability: Excessive heat. High energy sources of ignition. Hazardous polymerization: Will not occur. Incompatible substances: Strong oxidizers. BQ INACTIVE - MOBIL 1 0W-40 2/5

3 Hazardous decomposition products: Does not decompose at ambient temperatures. Section 6: TOXICOLOGICAL PROPERTIES Route of entry: Skin contact, eye contact, inhalation and ingestion. Effects of acute exposure Eye contact: Slightly irritating but will not injure eye tissue. Skin contact: Prolonged contact may cause irritation. Low toxicity. High pressure injection under skin may cause serious damage. Inhalation: No significant effect at room temperature. Prolonged exposure may cause irritation to the respiratory tract. Ingestion: Low toxicity. Effects of chronic exposure: See effects of acute exposure. LD50 of product, species & route: > 5000 mg/kg rat oral. Based on testing of similar products. > 5000 mg/kg rabbit dermal. LC50 of product, species & route: > 5000 mg/m3 rat inhalation. Based on testing of similar products. Exposure limit of material: 5 mg/m3 (oil mists). Sensitization to product: Not available. Carcinogenic effects: Not listed as a carcinogen. Reproductive effects: Not available. Teratogenicity: Not available. Mutagenicity: Not available. Synergistic materials: Not available. Precautionary Measures Section 7: PREVENTATIVE MEASURES Gloves/Type: None required with normal use. Respiratory/Type: None required under normal use. Eye/Type: For high concentrations use an atmosphere-supplied, positive-pressure demand self-contained or air-line breathing apparatus. Safety glasses with side-shields. Footwear/Type: Safety shoes per local regulations. BQ INACTIVE - MOBIL 1 0W-40 3/5

4 Clothing/Type: Wear adequate protective clothes. Other/Type: Eye wash facility should be in close proximity. Emergency shower should be in close proximity. Ventilation requirements: Adequate ventilation. Leak/Spill: Eliminate all sources of heat and ignition. Evacuate all non-essential personnel. Prevent entry into drains, sewers, and other waterways. Stop leak if without risk. Wear appropriate protective equipment. Contain the spill with sand or earth. Soak up or pump to an appropriate container. Notify the appropriate authorities as required. Slip hazard. Waste disposal: In accordance with municipal, provincial and federal regulations. May be incinerated. Release pressure prior to disposing of container. Handling procedures and equipment: Handle and open container with care. Keep away from heat, sparks, and open flame. Use adequate ventilation. Wash thoroughly after using, particularly before eating or smoking. Wear personal protective equipment appropriate to task. Empty containers containing residue may cause a hazard. Do not reuse empty containers without commercial cleaning. Use proper grounding procedures. Avoid contact with skin, eyes and clothing. Do not pressurize, cut, heat, or weld empty containers. Avoid breathing vapor, fumes or mist. Avoid spills, causes slippery surfaces. Launder contaminated clothing prior to reuse. Storage requirements: Store away from all sources of ignition. Store in a cool and well ventilated area. Store away from incompatible materials. Do not store in open or unlabelled containers. TDG classification: Not regulated. Special shipping information: See transportation information. Section 8: FIRST AID MEASURES Skin contact: Remove contaminated clothing. Flush with large amounts of water; use soap if available. If irritation persists, consult a physician. If injected by high pressure under the skin, regardless of the appearance or its size, contact a physician immediately. Delay may cause loss of affected part of the body. Eye contact: Immediately flush eyes with plenty of water for at least 15 minutes. If irritation occurs, consult a physician. Inhalation: Remove victim to fresh air. If not breathing, qualified personnel should administer artificial respiration. Get medical attention. Keep person warm and at rest. Obtain immmediate medical attention. Preferable mouth-to-mouth. BQ INACTIVE - MOBIL 1 0W-40 4/5

5 Ingestion: No first aid should be needed. Never give anything by mouth to an unconscious person. If irritation occurs, consult a physician. Additional information: The above information is believed to be correct but does not purport to be all inclusive and shall be used only as a guide. This company shall not be held liable for any inaccuracies. Section 9: ADDITIONAL INFORMATION General note: This material safety data sheet was prepared from information obtained from various sources, including product suppliers and the Canadian Center for Occupational Health and Safety. Data prepared by: Conform-Action Data Systems A division of Canada Inc Transcanada, suite 101 Dorval, QC H9P 1H7 Tel: (514) Fax: (514) support@netmsds.com. BQ INACTIVE - MOBIL 1 0W-40 5/5