MATERIAL SAFETY DATA SHEET

Transcription

1 Page 1 of 5 SECTION I: PRODUCT INFORMATION PRODUCT: Sikagard 62 CA PART A REVISION DATE: February 1 st, 2015 USAGE: SOLVENT-FREE, ABRASION RESISTANT, EPOXY RESIN, WATERPROOF COATING, FOR DRY OR MOIST SURFACES MANUFACTURER/SUPPLIER: SIKA CANADA INC. 601, avenue Delmar Pointe Claire, QC H9R 4A9 EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) TDG CLASSIFICATION: t regulated WHMIS Classification: D2B UN NUMBER: t applicable Class: t applicable Packaging Group: t applicable SECTION II: HAZARDOUS INGREDIENTS Hazardous ingredients % T.L.V. # CAS LD 50 (mg/kg) (species, route) LC 50 (species, route) PETROLEUM DISTILLATE 5-10 t available t available t available EPOXY RESIN t available > 5000 (oral, rat) t available SECTION III: PHYSICAL CHARACTERISTICS Physical State: Appearance and Odor: Odor Threshold: Evaporation Rate: Vapor Density: Vapor Pressure: Liquid Amber liquid with ether odor t applicable Boiling Point: Freezing Point: Density: 1,15 g/ml Water Solubility: ph: % volatility: t Applicable Water/Oil Distribution:

2 Page 2 of 5 PRODUCT: Sikagard 62 CA PART A SECTION IV: FIRE AND EXPLOSION HAZARDS Flammability: If Yes, under what conditions: Extinguishing methods: Foam, dry chemical products, CO 2, water hose. TDG Flammability Class: t Regulated Flammable upper limits (% vol.): t Applicable Flammable lower limits (% vol.): t Applicable Flash Point (method used): > 100 C Auto-ignition temperature: Dangerous Combustion Products: Carbon oxides, phenol Special Methods: Firefighters must wear usual protective clothing and respiratory equipment. A water hose may be used to cool the containers and dissipate the vapors. Protect from mechanical impact: Protect from static discharge: SECTION V: REACTIVITY Chemical stability: If not, under what conditions: Yes But an excessive heat may degrade the epoxy resin. Dangerous decomposition products: Phenol, Carbon Oxides. Incompatibility with other material: If Yes, which ones: Yes Strong acid, base, oxidizer. Polymerization Risks: May polymerize at very high temperatures.

3 Page 3 of 5 PRODUCT: Sikagard 62 CA PART A SECTION VI: TOXIC PROPERTIES ROUTE OF ENTRY / CONTACT May cause eye irritations. Carcinogenicity: Skin: May be irritating to the skin, may cause sensitization. Toxic effects on reproduction: Inhalation: May irritate the lungs. May cause an allergic reaction. Teratogenicity: Ingestion: May cause irritation to the gastrointestinal system. Mutagenicity: Product with synergistic effects: An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory problems.

4 Page 4 of 5 PRODUCT: Sikagard 62 CA PART A SECTION VII: PREVENTIVE MEASURES PERSONAL PROTECTIVE EQUIPMENT OTHERS Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required Respiratory equipment: t necessary under normal use. Safety glasses Procedure in case of leaks: Absorb with sand or other absorbent material. Shoes: Clothing: Ordinary Rubber Apron Handling and Equipment methods: Avoid skin, eye and clothing contact Other: Warehouse Requirements: Keep all containers closed in a cool, dry area. Keep away from heat and open flame. Special Shipping Instructions: See TDG class Waste Disposal: Dispose of sand and rinse water according to municipal, provincial or federal laws for disposal of chemicals.

5 Page 5 of 5 PRODUCT: Sikagard 62 CA PART A SECTION VIII: FIRST AID Skin: Remove contaminated clothing and shoes. Wash immediately with plenty of soap and water. Consult a physician if required Rinse eyes immediately with plenty of water keeping the eyelids open in order to ensure a complete rinsing. This should last at least 15 minutes for maximum protection. Consult a physician immediately. Inhalation: In the case of overexposure, evacuate to fresh air. Consult a physician if required. Ingestion: Drink plenty of water. Do not induce vomiting. Do not give anything by mouth to an unconscious person. See a physician immediately. SECTION IX: PREPARATION INFORMATION Prepared By: R & D of Sika Canada Inc. Telephone #: (514) Fax #: (514) tice To Reader The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material, product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's current Product Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone number listed in Section IX of this MSDS. SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS. All sales of Sika products are subject to its current terms and conditions of sale available at or AQ 191 A Date: 2012/02/01 App: S.G.

6 Page 1 of 5 SECTION I: PRODUCT INFORMATION PRODUCT: Sikagard 62 CA PART B REVISION DATE: February 1 st, 2015 USAGE: SOLVENT-FREE, ABRASION RESISTANT, EPOXY RESIN, WATERPROOF COATING, FOR DRY OR MOIST SURFACES MANUFACTURER/SUPPLIER: SIKA CANADA INC. 601, avenue Delmar Pointe Claire, QC H9R 4A9 EMERGENCY TELEPHONE NUMBER: CANUTEC (collect) (613) TDG CLASSIFICATION: Paint related material WHMIS Classification: D2A, E UN NUMBER: 3066 Class: 8 Packaging Group: III SECTION II: HAZARDOUS INGREDIENTS Hazardous ingredients % T.L.V. # CAS LD 50 (mg/kg) (species, route) LC 50 (species, route) SILICA SAND ACGIH mg/m > (oral, rat) t Available TRIDIMETHYL AMINO METHYL PHENOL 2, 4, t Available t Available t Available BENZYL ALCOHOL t Available (oral, rat) 4000 mg/m 3 (rat) AMINE AND EPOXY RESIN COPOLYMER t Available t Available t Available t Available PETROLEM DISTILLATE 3-7 t Available t Available t Available SECTION III: PHYSICAL CHARACTERISTICS Physical State: Appearance and Odor: Odor Threshold: Evaporation Rate: Vapor Density: Vapor Pressure: Liquid Colored liquid with amine odor t Applicable Boiling Point: Freezing Point: Density: 1,4 g/ml Depending on color Water Solubility: Partial ph: % volatility: t Applicable Water/Oil Distribution:

7 Page 2 of 5 PRODUCT: Sikagard 62 CA PART B SECTION IV: FIRE AND EXPLOSION HAZARDS Flammability: If Yes, under what conditions: Extinguishing methods: Foam, dry chemical products, CO 2, water hose. TDG Flammability Class: t Regulated Flammable upper limits (% vol.): Flammable lower limits (% vol.): Flash Point (method used): 103 C Auto-ignition temperature: Dangerous Combustion Products: CO, nitrogen oxides, carbon anhydride, aldehyde, ketone Special Methods: Firefighters must wear usual protective clothing and respiratory equipment. A water hose may be used to cool the containers and dissipate the vapors. Protect from mechanical impact: Protect from static discharge: SECTION V: REACTIVITY Chemical stability: If not, under what conditions: Yes Dangerous decomposition products: CO, nitrogen oxides, carbon anhydride, aldehyde, ketone. Incompatibility with other material: Yes Polymerization Risks: If Yes, which ones: Acid, strong oxidizer, organic halogen, aldehyde, ketone, acrylate, nitrate.

8 Page 3 of 5 PRODUCT: Sikagard 62 CA PART B SECTION VI: TOXIC PROPERTIES ROUTE OF ENTRY / CONTACT Skin: May cause irritations, may cause severe burns, and may cause blindness. May be irritating, may cause severe burns, may cause dermatitis, allergic reaction, sensitization. Carcinogenicity: Toxic effects on reproduction: According to the IARC the silica sand is a probable cause of cancer (D2A). Inhalation: Vapors or this product may cause irritation. Teratogenicity: Ingestion: May cause severe burns to the mouth, throat, stomach, nausea, vomiting, fainting, diarrhea, death, lung damages, bleeding to the gastro-intestinal system Mutagenicity: Product with synergistic Effects: An over exposure may cause breathing difficulty, fainting, sensitization, headaches, nausea, vomiting, lung damage, dizziness, ulcers. May accentuate respiratory, eye, lung and allergic problems. An acute or chronic exposure will increase the toxic effects mentioned in this section and may aggravate respiratory problems.

9 Page 4 of 5 PRODUCT: Sikagard 62 CA PART B SECTION VII: PREVENTIVE MEASURES PERSONAL PROTECTIVE EQUIPMENT OTHERS Gloves: Chemical resistant gloves. Ventilation: Sufficient ventilation required Respiratory equipment: t necessary under normal use. Facial mask or Safety glasses Procedure in case of leaks: Absorb with sand or other absorbent material. Shoes: Clothing: Leather Rubber Apron Handling and Equipment methods: Avoid skin, eye and clothing contact Other: Shower or eye bath Warehouse Requirements: Keep all containers closed in a cool, dry and well ventilated area. Keep away from heat and open flame. Special Shipping Instructions: See TDG class Waste Disposal: Dispose of sand and rinse water according to municipal, provincial or federal laws for disposal of chemicals.

10 Page 5 of 5 PRODUCT: Sikagard 62 CA PART B SECTION VIII: FIRST AID Skin: Remove contaminated clothing and shoes. Wash immediately with plenty of soap and water. Throw out shoes that were dirtied on the inside. Wash clothes before wearing again. Consult a physician if required. Rinse eyes immediately with plenty of water keeping the eyelids open in order to ensure a complete rinsing. This should last at least 10 minutes for maximum protection. The rinse within the first minute is essential to ensure maximum protection. Consult a physician. Inhalation: In the case of overexposure, evacuate to fresh air. Consult a physician if required. Ingestion: Drink plenty of water. Do not induce vomiting. Do not give anything by mouth to an unconscious person. See a physician immediately. SECTION IX: PREPARATION INFORMATION Prepared By: R & D of Sika Canada Inc. Telephone #: (514) Fax #: (514) tice To Reader The information contained in this Material Safety Data Sheet applies only to the actual Sika Canada product identified and described herein. This information is not intended to address, nor does it address the use or application of the identified Sika product in combination with any other material, product or process. All of the information set forth herein is based on technical data regarding the identified product that Sika believes to be reliable as of the date hereof. Prior to each use of any Sika product, the user must always read and follow the warnings and instructions on the product's current Product Data Sheet, product label and Material Safety Data Sheet for each Sika product, which are available at web site and/or telephone number listed in Section IX of this MSDS. SIKA MAKES NO WARRANTIES EXPRESS OR IMPLIED AND ASSUMES NO LIABILITY ARISING FROM THIS INFORMATION OR ITS USE. SIKA SHALL NOT BE LIABLE UNDER ANY LEGAL THEORY FOR SPECIAL OR CONSEQUENTIAL DAMAGES AND SHALL NOT BE RESPONSIBLE FOR THE USE OF THIS PRODUCT IN A MANNER TO INFRINGE ON ANY PATENT OR ANY OTHER INTELLECTUAL PROPERTY RIGHTS HELD BY OTHERS. All sales of Sika products are subject to its current terms and conditions of sale available at or AQ 191 A Date: 2012/02/01 App: S.G.