Sur face options bright finish anodic clean electropolished. Outer surface: Ra 0.80 µm (32 µin)
|
|
|
- Annice Townsend
- 5 years ago
- Views:
Transcription
1 Material imensions Technical terms of elivery Tubes Length Fittings Tolerances Ens Wele or seamless austenitic stainless steel tubes, epening on outer iameter (see imensions) /BN2/TP316L, -Ferrite content of the basic material an longituinal wel 0.5% /TP316L TP316L Stock imensions: Imperial: 1/4 (6.35 x 0.89 mm) to 6 ( x 2.77 mm) ISO: x 1.60 mm to x 2.60 mm Metric: 6.00 x 1.00 mm to x 2.00 mm Further imensions on eman A ccoring to A STM A 269 / A 270, IN EN / IN EN mm (max. 10% short lengths possible) Tube components: Prematerial accoring to ASTM A 269 / A 270, IN EN / Machine components: Prematerial accoring to ASTM A 479, IN EN , IN Accoring to ASTM A 269 / A 270 (pharmaceutical tubes) or IN EN ISO / T3 Tubes an fittings are prepare for orbital weling Sur face options bright finish anoic clean electropolishe Tubes an Fittings Inner surface : Ra 0.80 µm (32 µin) Ra 0.80 µm (32 µin) Ra 0.60 µm (24 µin) Outer surface: Ra 0.80 µm (32 µin) Fittings Ra value in the col worke area of fittings (inner an outer surface) as well as on the longituinal wel seam of electropolishe tubes an fittings is not efine Specifie r oughness of total surface available on r equest Inner surface treatment Tubes ac Tubes ep Fittings ac Fittings ep Har ness A noic cleaning proceure Spec. HE 150 3VN S Electropolishing proceure Spec. HE 175 3VN Anoic cleaning pr oceure Spec. HE 111 3VNS Electropolishing proceure Spec. HE 111 3VN Max. 180 HV 5/90 HRB Test proceures Verification of basic test certificate Verification of imensions Visual control Roughness measurements Enoscopic inspection of bright finishe tubes Marking Tubes Fittings Permanently marke Neele marking Information Heat number OCKWEILER W number Material imensions ocumentation Inspection certificate (3.1) accor ing to IN EN for the pr ematerial C7/07 / P7/07 Packing an eliver y Bright finishe tubes an fittings are close with PE caps, anoically cleane an electropolishe tubes an fittings with PE/PA squares an PE caps, bagge in polythene PE an marke with white sticker weltron or weltron ep. elivery of tubes in tubular container or wooen crate, fittings in str ong car boar box with shock-absorbing filler.
2 I Bogen 90 Elbows 90, T-7 IMPERIAL S MR L Inch mm S mm L mm l mm MR mm 1/4" /8" / /4" " /2" " /2" " " " ISO / IN N / NW mm S mm L mm l mm MR mm
3 I Bogen 90 Elbows 90, T-7 METRIC S MR L N / NW mm S mm L mm l mm MR mm
4 MR L/B Bogen 180 Elbows 180, T-23 I S IMPERIAL A N / NW mm S mm L mm l mm MR mm 1/2" /4" " /2" " /2" " "
5 MR L/B Bogen 180 Elbows 180, T-23 I S ISO / IN A N / NW mm S mm L mm l mm MR mm
6 MR S Bogen 45 Elbows 45, T-8 IMPERIAL I I Inch mm S mm l mm MR mm 1/4" /8 " /2" / / /4" " /2" " /2" " " " ISO / IN N / NW mm S mm l mm MR mm
7 MR S Bogen 45 Elbows 45, T-8 METRIC I I N/NW mm s mm l mm MR mm / /
8 eckel Caps 20 F f IMPERIAL Inch mm Size t mm F mm 1/4" ,00 3/8" ,00 1/2 " ,00 3/4" ,00 1" /2" " /2" " " " ISO / IN N/NW mm Size t mm F mm / /
9 eckel Caps 20 F f METRIC N/NW mm Size t mm F mm , ,00
10 Konzentrische Reuzierungen Concentric Reucers, T-11 IMPERIAL L Inch / mm / L mm 1/2" x 3/8" x / /4" x 3/8" x / x 1/2" x / " x 1/2" x / x 3/4" x / /2" x 1/2" x / x 3/4" x / x 1" x / " x 1" x / x 1 1/2" x / /2" x 1" x / x 1 1/2" x / x 2" x / " x 1 1/2" x / x 2" x / x 2 1/2" x / " x 2" x x x 2 1/2" x / x 3" x / " x 3" x / " x 4" x /
11 Konzentrische Reuzierungen Concentric Reucers, T-11 ISO / IN L Inch / mm / L mm 10 x x / x x / x 10 x / x x / x 10 x / x 15 x / x x / x 20 x / x x / x 20 x / x 25 x / x x / x 20 x / x 25 x / x 32 x / x x / x 25 x / x 32 x / x 40 x / x x / x 40 x / x 50 x / x x / x 65 x / x x / x 80 x / x x /
12 Konzentrische Reuzierungen Concentric Reucers, T-11 METRIC L N / NW mm S mm l mm 6 x x / x 4 10 x / x x / x 8 x / x x / x 10 x / x x / x 10 x / x 15 x / x x / x 20 x / x x / x 20 x / x 25 x / x x / x 25 x / x 32 x / x x / x 32 x / x 40 x / x x / x 50 x / x x / x 65 x / x x / x 80 x / x x / x 100 x /
13 Klammern/ichtungen Couplings/Gaskets IMPERIAL Inch Tube imensions x s mm Size Gaskets EPM Gaskets PTFE 1/2" x /4" x " x /2" x " x /2" x " x " x " x ISO N / NW Tube imensions Size Gaskets EPM Gaskets PTFE x s mm x x x x x x x x x x x
14 Klammern/ichtungen Couplings/Gaskets METRIC N / NW Tube imensions x s mm Size Gaskets EPM Gaskets PTFE x x x x x x x x x x x
15 Exzentrische Reuzierungen Eccentric Reucers, T-11 L IMPERIAL Inch / mm / L mm 1/2" x 3/8" x / /4" x 1/4" x / x 1/2" x / " x 1/2" x / x 3/4" x / /2" x 1/2" x / x 1" x / " x 1" x / x 1 1/2" x / /2" x 1" x / x 1 1/2" x / x 2" x / " x 1 1/2" x / x 2" x / x 2 1/2" x / " x 2" x / x 2 1/2" x / x 3" x / " x 4" x /
16 Exzentrische Reuzierungen Eccentric Reucers, T-11 L ISO / IN N/NW / mm / L mm 10 x x / x x / x 10 x / x x / x 10 x / x 15 x / x x / x 20 x / x x / x 20 x / x 25 x / x x / x 20 x / x 25 x / x 32 x / x x / x 25 x / x 32 x / x 40 x / x x / x 40 x / x 50 x / x x / x 65 x / x x / x 80 x /
17 Exzentrische Reuzierungen Eccentric Reucers, T-11 L METRIC NW / mm / L mm 8x x / x x / x 8 x / x x / x 10 x / x x / x 10 x / x 15 x / x x / x 20 x / x x / x 20 x / x 25 x / x x / x 25 x / x 32 x / x x / x 32 x / x 40 x / x x / x 50 x / x x / x 65 x / x x / x 80 x / x x / x 100 x /
18 L S F Stutzen Ferrules, T-22 The new stanar for clamp connections, IN32676: , became effectiv on 01 May There are imension changes for the ferrule lengths ISO (A an B) an metric (B new). ie neue Norm für Klemmverbinungen, ie IN 32676: , ist am in Kraft getreten. Maßänerungen gibt es bei en Stutzenlängen ISO (A un B) un Metrisch (B neu). A/B IMPERIAL Inch mm S mm F mm L mm A mm B mm C mm 1/4" /8" /2" /4" " / /2" " /2" " " " ISO N/NW mm S mm F mm L mm A mm B mm
19 L S F Stutzen Ferrules, T-22 A/B METRIC N/NW mm S mm F mm L mm A mm B mm
20 I/B T-Stücke, reuziert T-Pieces, reuce, T-10 L/2A IMPERIAL Inch / mm / 2A/L mm B/I mm 3/8" x 1/4" 9.53 x / /2" x 1/4" x / x 3/8" x / /4" x 1/4" x / x 3/8" x / x 1/2" x / " x 1/4" x / x 3/8" x / x 1/2" x / x 1/2" x / x 3/4" x / x 3/4" x / /2" x 1/2" x / x 1/2" x / x 3/4" x / x 3/4" x / x 1" x / " x 1/2" x / x 1/2" x / x 3/4" x / x 3/4" x / x 1" x / x 1 1/2" x / /2" x 1/2" x / x 3/4" x / x 1" x / x 1 1/2" x / x 2" x /
21 I/B T-Stücke, reuziert T-Pieces, reuce, T-10 L/2A IMPERIAL Inch / mm / 2A/L mm B/I mm 3" x 1/2" x / x 3/4" x / x 1" x / x 1 1/2" x / x 2" x / x 2 1/2" x / " x 1/2" x / x 3/4" x / x 1" x / x 1 1/2" x / x 2" x / x 2 1/2" x / x 3" x / " x 4" x /
22 I/B T-Stücke, reuziert T-Pieces, reuce, T-10 L/2A ISO / IN N/W / mm / 2A/L mm B/I mm 10 x x / x x / x 10 x / x x / x 10 x / x 15 x / x x / x 15 x / x 20 x / x x / x 20 x / x 25 x / x x / x 20 x / x 25 x / x 32 x / x x / x 25 x / x 32 x / x 40 x / x x / x 32 x / x 40 x / x 50 x / x x / x 40 x / x 50 x / x 65 x / x x / x 65 x / x 80 x /
23 I/B T-Stücke, reuziert T-Pieces, reuce, T-10 L/2A METRIC N/W / mm / 2A/L mm B/I mm 6 x x / x x / x x / x 8 x / x x / x 10 x / x x / x 15 x / x x / x 15 x / x 20 x / x x / x 20 x / x 25 x / x x / x 25 x / x 32 x / x x / x 32 x / x 40 x / x x / x 40 x / x 50 x / x x / x 50 x / x 65 x / x x / x 65 x / x 80 x / x x /
24 I/B T-Stücke T-Pieces, T-9 L/2A IMPERIAL Inch / mm / 2A/L mm B/I mm 1/4" x 1/4" 6.35 x / /8" x 3/8" 9.53 x / /2" x 1/2" x / /4" x 3/4" x / " x 1" x / /2" x 1 1/2" x / " x 2" x / /2" x 2 1/2" x / " x 3" x / " x 4" x / " x 6" x /
25 I/B T-Stücke T-Pieces, T-9 L/2A ISO / IN N/W / mm / 2A/L mm B/I mm 8 x x / x x / x x / x x / x x / x x / x x / x x / x x / x x / x x /
26 I/B T-Stücke T-Pieces, T-9 L/2A METRIC N/W / mm / 2A/L mm B/I mm 8 x x / x x / x x / x x / x x / x x / x x / x x / x x / x x / x x /
27 HK T-Stücke, kurzer Abgang T-Pieces, short branch L IMPERIAL / mm / L mm hk mm Tol. Mm x / / x / /-1.00 x / / x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / /-1.00 x / /-1.00
28 HK T-Stücke, kurzer Abgang T-Pieces, short branch L ISO / IN / mm / L mm hk mm Tol. Mm x / / x / /-1.00 x / / x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / /-1.00 x / /-1.00
29 HK T-Stücke, kurzer Abgang T-Pieces, short branch L ISO / IN / mm / L mm hk mm Tol. Mm x / /-1.00 x / /-1.00 x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / /-1.00 x / /-1.00 x / /-1.00 x / /-1.00
30 HK T-Stücke, kurzer Abgang T-Pieces, short branch L Metrich / mm / L mm hk mm Tol. Mm x / / x / /-1.00 x / / x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / /-1.00
31 HK T-Stücke, kurzer Abgang T-Pieces, short branch L METRIC / mm / L mm hk mm Tol. Mm x / /-1.00 x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00 x / / x / /-1.00 x / /-1.00 x / /-1.00
32 S Rohre Tubes L I IMPERAL Inch xs mm Weight kg/m 1/4"* 6.35 x /8"* 9.53 x /2" x /4" x " x /2" x " x /2" x " x " x " x ISO / IN Inch xs mm Weight kg/m x x x x x x 2, x x x x x x x * nahtlos/seamless
Seamless or welded stainless steel tube, depending on outer diameter (see dimensions). TP316L / /
Material imensions Technical terms of elivery Tubes ength Fittings Tolerances W el ens Seamless or wele stainless steel tube, epening on outer iameter (see imensions). TP316 / 1.4404 / 1.4435 Stock imensions:
ASME BPE 2014 DT Range of Bioprocessing Fittings
SME PE 2014 DT Range of ioprocessing Fittings lchem Process Ltd offer the full range of SME PE ioprocessing Fittings in both SF1 and SF4 surface finishes. The standard provides a good manufacturing guide
GEMO 1.3 SANITARY ISO2037
SANIARY ISO2037 51 UES AND FIINGS Catalog able of Contents page 53 66 ISO2037 FIINGS Introduction & Order Information ends 8009 S2WK.. 55 8010 SL2WS... 55 8011 S2WCL... 55 8012 SL2WS... 56 ees 8013 S7W...
VSR modulating valves with membrane actuator
Modulating valves are used in process technology to control process parameters such as temperature, pressure or flow when handling liquid and gaseous media. uth's team of design and process engineers have
Mark 958 Series (3/4" - 1") Sanitary Gas Back Pressure Regulators
Mark 958 Series Sanitary Gas Back Pressure Regulators (3/4" - 1") The Mark 958 Sanitary Gas Back Pressure Regulator is the ideal valve for low back pressure gas regulation for blanketing, motive force,
OUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel
OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"
Two Ferrule Tube Fittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) O.D.
Two errule Tube ittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) valve & fitting www.veelok.com Introduction Vee-Lok tube fittings are designed to provide a leak-free connection and applied
JSRH Series. Sanitary Valves JSRH Series High Flow Pressure Reducing Valves. High Flow Bio-Pharma Clean Gas Pressure Reducing Valves
JSRH Series High Flow Bio-Pharma Clean Gas Pressure Reducing Valves The JSRH Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. It may also be
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC
1/16 THROUGH 2 -INCH, 2 MM THROUGH 50 MM-METRIC LET-LOK TUBE FITTINGS DESCRIPTION HAM-LET LET-LOK HOW DOES IT WORK? HAM-LET LET-LOK LET-LOK LET-LOK HAM-LET LET-LOK 1 4 3 2 4 Tube 1 2 3 1 2 3 4 6 LET-LOK
COMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe LET-LOK HOW DOES IT WORK? A HAM-LET has gained an
Mark 958 Series Sanitary Gas Back Pressure Regulators
Mark 958 Series Sanitary Gas Back Pressure Regulators (3/4" - 1") The Mark 958 Sanitary Gas Back Pressure Regulator is the ideal valve for low back pressure gas regulation for blanketing, motive force,
2/2-Way and T Valve Bodies in Stainless Steel
2/2-Way and T Valve odies in Stainless Steel eading the world in pharmaceutical and biotechnology industry sterilisation processes GEMÜ is one of the leading manufacturers of valves, measurement and control
A NEW APPROACH FOR SEMICONDUCTOR INSTALLATIONS
A NEW APPROACH FOR SEMICONDUCTOR INSTALLATIONS A CARTEN DOCKWEILER EVANS COOPERATION ENSURING THE HIGHEST QUALITY SURFACE AVAILABLE THE R4i-LATERAL READY FOR INSTALLATION has been designed to meet all
AS13 1F-M3 AS13 1F-M5 AS23 1F-01 AS23 1F-02
Spee Controller with One-touch Fittings Series Elbow Style, Universal Style Minimizes installation time an cost Reuces the mounting height an enables compact machinery esign. Effective area is larger than
Bourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type
Mechanical Pressure Measurement Bourdon Tube Pressure Gauges Ultra High Purity (UHP) Series Type 230.25 WIKA Datasheet 230.25 Applications Semiconductor and electronic industry, medical industry, gene
EVANS COMPONENTS, INC GLOBAL TECHNICAL SUPPORT & DISTRIBUTION DESIGN & MANUFACTURING FACILITIES IN THE UNITED STATES & CHINA
EVANS COMPONENTS, INC GLOBAL TECHNICAL SUPPORT & DISTRIBUTION DESIGN & MANUFACTURING FACILITIES IN THE UNITED STATES & CHINA NOTE: PRODUCT AVAILABILITY AND SPECIFICATIONS CONTAINED HEREIN ARE SUBJECT TO
Pressure Measurement Single-range transmitters for general applications
Siemens A 207 Overview Application The SITRANS P Compact pressure transmitter is designed for the special requirements of the food, pharmaceutical and biotechnology industries. The use of high-grade materials
Regulating valves Type REG 6-65 Type REG-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Regulating valves Type REG 6-65 Type REG-SS 15-40 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction........................................................................................3
PROTECTIVE HOSES. HYDRA Stripwound hoses for optoelectronics, laser procedures, medical technology or the pharmaceutical and food industry.
PROTECTIVE HOSES HYRA Stripwoun hoses for optoelectronics, laser proceures, meical technology or the pharmaceutical an foo inustry. Witzenmann-Speck GmbH Werner-Siemens-Str. 2 29 Kieselbronn, Germany Phone
Materials : Stainless steel ASTM A351 CF8M
Certificat 3.1 Size: Ends : Min Temperature : Max Temperature : DN 15 to DN 200 PN16 Flanges R.F. - 20 C + 200 C Max Pressure : 16 Bars Specifiations : Removable stainless steel filter Bolted bonnet with
JSRH Series. Sanitary Valves JSRH Series High Flow Pressure Reducing Valves. High Flow Bio-Pharma Clean Gas Pressure Reducing Valves
JSRH Series High Flow Bio-Pharma Clean Gas Pressure Reducing Valves The JSRH Series high purity gas pressure regulator was designed and built specifically for Bio-Pharma gas applications. It may also be
COMPRESSION TUBE FITTINGS
COMPRESSION TUBE FITTINGS 1/16 THROUGH 2 2 MM THROUGH 50 MM LET-LOK TUBE FITTINGS DESCRIPTION The HAM-LET GROUP has produced high quality tube and pipe fittings in various materials for high pressure applications
Hand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS
Data sheet Hand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations,
Blanketing Valve ZM-R. low pressure reducing valve
Blanketing Valve low pressure reducing valve ZMR Ø a / c DN f e Pressure range: Supply pressure: up to +16 bar / +6424 inch W.C. Set pressure for function: up to +500 mbar / +200 inch W.C. Set pressure
Regulating valves REG-SA and REG-SB
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.
Flexible & Intelligent
Flexible & Intelligent The flexible copper tube cuprotherm CTX tubes are copper tubes with a firmly adherent coating. Due to their structure they can be easily processed and are characterized by a flexibility
Valves. Diaphragm shut-off valves, kidney-type
Valves Diaphragm shut-off valves, kidney-type Application When leakage of even the smallest quantities must be avoided with certainty For maximum requirements to operating safety For maximum requirements
Flange Adapters. Threadless, weldless transition from flanged piping systems to tubing systems
www.swagelok.com Flange dapters Threadless, weldless transition from flanged piping systems to tubing systems Flange types meet SM, IN, N, and IS standards One-piece integrally machined forged body vailable
Edition: aquatherm red. Pipe system made of polypropylene for fire sprinkler systems. aquatherm state of the pipe
Eition: 2.2017 aquatherm re Pipe system mae of polypropylene for fire sprinkler systems aquatherm state of the pipe Our sales an elivery conitions (January 2014) an the contacts of our technical sales
COMPONENTS MANUFACTURING
COMPONENTS MANUFACTURING ASSEMBLY TESTING Manifolds Valex Manifolds PCW, CFOS, UHP Configurations with ball valve, diaphragm valve & bellows valve options Main run lengths up to 24 feet & 12 inch in diameter
ENGINEERING TECHNICAL REPORT
SSP DUOLOK FITTINGS ON 1.000 x 0.139 WALL 316SS TUBING ENGINEERING TECHNICAL REPORT SSP 8250 Boyle Parkway Twinsburg, Ohio 44087 U.S.A. mysspusa.com 1.330.425.4250 1 TABLE OF CONTENTS 1.0 Introduction
Type overview. Technical data. Safety notes
Technical ata sheet hange-over ball valve, 3-way, Flange, PN 6 For close col an warm water systems For switching functions on the water sie an 2-point controls in air hanling units an heating systems ir
Products no longer available
Technical ata sheet R7..R haracterize control valves, 3-way, with flange PN 6 for open an close col an warm water systems for moulating control on the water sie of air-hanling an heating systems air bubble-tight
CHECK VALVES APPLICATIONS
45 APPLICATIONS The check valves, shown in this chapter, are classified Pressure accessories in the sense of the Pressure Equipment Directive 97//EC, Article 1, Section 2.1.4 and are subject of Article
JSR Series. Sanitary Valves JSR Series Ultra-High Pressure Reducing Valves. High Purity Bio-Pharma Gas Pressure Reducing Valves.
JSR Series High Purity Bio-Pharma Gas Pressure Reducing Valves JSR is the first high purity gas pressure regulator designed and built specifically for hygienic, ASME BPE gas applications. Traditionally,
1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI
Siemens AG 06 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure
Products no longer available
Technical ata sheet R7..R Open-close ball valves, 3-way, with flange PN 6 for open an close col an warm water systems for switching functions on the water sie an 2-point controls in air-hanling an heating
Certificate of Accreditation
PERRY JOHNSON LABORATORY ACCREDITATION, INC. Certificate of Accreditation Perry Johnson Laboratory Accreditation, Inc. has assessed the Laboratory of: (Hereinafter called the Organization) and hereby declares
Materials : Dichromate zinc plated steel flanges
Size : Ends : Min Temperature : Max Temperature : DN 25 to 300 Flanges PN10/16-35 C + 130 C Max Pressure : 16 Bars up to DN150, 10 bars over Specifications : Absorb vibrations and noise Linear and angular
Robolux Multiway Multiport Diaphragm Valve, standard product range
Robolux Multiway Multiport iaphragm Valve, standard product range Increased process efficiency Reduced installation costs Reduced number of valves and welds Zero dead volume and no contamination Type 2035
CALEFFI. Reduced pressure zone backflow preventer. 574 series 01022/18 NA D E C F B D E. Function
Reduced pressure zone backflow preventer series LEFFI 01022/18 N REITE ISO 9001 FM 216 ISO 9001 No. 000 Function The backflow preventer can be used in all plumbing systems where there is danger of the
World Area Differences Technical Information
World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National
Buttweld Fittings ANSI B16.9, ANSI B16.28, MSS-SP-43, MSS-SP-95, MSS-SP-97
uttweld Fittings NSI 16.9, NSI 16.28, SS-SP-43, SS-SP-95, SS-SP-97 90 LR ELOWS 45 LR ELOWS 180 LR ELOWS 90 SR ELOWS oncentric and eccentric reducers, equal and reducing tees, 45 and 90 elbows, buttweld
v. Size shall be specified on drawings.
SPECIFICATION FOR VACUUM INSULATED PIPING Part 1 General 1. Submittals a. After award of contract and before executing any manufacturing, shop drawings and specifications shall be submitted to the customer
WaterSource Heat Pump Hose Kit Performance Specification-Summary
WaterSource Heat Pump Hose Kit Performance Specification-Summary AUTOMATIC & MANUAL BALANCING HOSE KITS Contractor shall provide and install Hays Hose Kits. Each kit, shall include a Hays 2500 Series Mesurflo
Hand operated regulating valves Types REG-SA and REG-SB
Data sheet Hand operated regulating valves Types REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand operated regulating valves, which act as normal shut-off valves in closed position.
TXXX - XX - XXXXX (XXX) X4 - XXX XX
ASTM TUBE PART NUMBER MATRIX TXXX - XX - XXXXX (XXX) X4 - XXX XX PROCESS CODE ALLOY CODE (SEE NOTE 1) SIZE CODE (SEE NOTE 3) USED WALL CODE SURFACE FINISH & VISUALS T1A = PER SP-9204 (101) 0S = 316L SEAMLESS
High-Purity. Ball Valves
High-Purity s Components MANUFACTURING ASSEMBLY TESTING HP High-Purity s CFOS Applications Cost-effective systems where cleaning for oxygen-grade services are required, such as: Clean-Dry Air (CDA), Oil-Free
MEASURING INSTRUMENTS Pressure Gauge T-Piece...77 Pressure Gauge TC 25.0, connection below...78 Pressure Gauge TC 25.0, connection behind...
Pressure Gauge T-Piece...77 Pressure Gauge TC 25.0, connection below...78 Pressure Gauge TC 25.0, connection behind...79 Pressure Gauge TC 50.5, connection below...80 Pressure Gauge TC 50.5, connection
Section B Stainless Steel Flow Control Equipment for the Food, Beverage, Dairy, Cosmetics, Biotechnology, Pharmaceutical and Electronics Processing Industries www.toplineonline.com Top Line precision crafted
Materials : Dichromate zinc plated steel flanges or AISI 316
Size : Ends : Min Temperature : Max Temperature : DN 25 to 300 Flanges PN10/16-35 C + 90 C Max Pressure : 16 Bars (10 bars at 90 C) Specifications : Absorb vibrations and noise Linear and angular compansion
ASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
For latest prices and delivery to your door visit MyTub Ltd
Technical ata sheet A6H / A6S Shut-off valves with clips, PN 6 / PN / PN 6, with manual overrie in open an close col an warm water systems for switching heating an cooling machines on an off Overview of
Pressure Measurement Single-range transmitters for general applications
Siemens AG 07 Overview Function U const. p U I EM Sensor Connection for auxiliary power supply Vent pipe with humidity filter Protective conductor connection/ Equipotential bonding Diaphragm The pressure
Hexagon head bolt UNC
Hexagon head bolt UNC ANSI B18.2.1 BS 1768 Technical data d s per inch L T (min.): L 6.IN. L T (min.): L>6.IN. F A No.10 24 - - 3 5/16 1/4 20 19 25 4 7/16 5/16 18 22 29 5,2 1/2 3/8 16 25 32 6 9/16 7/16
Overflow valves Type OFV Type OFV-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 Type OFV-SS 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction.......................................................................................
D e s c r i p t i o n
MPS Series D e s c r i p t i o n The MPS spin-on filter series is a complete product range suitable, for both suction and return applications. Utilising spin-on canisters, the MPS series are quick and
Pressure Measurement. Transmitters for basic requirements SITRANS P Z for gauge pressure. 2/4 Siemens FI Overview
f gauge pressure Siemens AG 010 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
SITRANS P measuring instruments for pressure
SITRANS P measuring instruments for pressure Z series for gage pressure Siemens AG 008 Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and
PVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
L21S/SR/ST Glass Level Gauges
L21S/SR/ST Glass Level Gauges Doc. no.: 150, en_cat_l21s/sr/st, 12/2014 Type of code Example: L21ST/1450/AANSI 3/4 150Lb RF/Large chamber Code 1 Basic type L21 2 Type of gauge S Tubular level gauge SR
Process Filtration From Pure to Sterile
From Pure to Sterile MAIN FEATURES & BENEFITS: Developed for the sterile filtration of air and gases in compressed gas applications as well as venting applications. High dirt holding capacity at a low
1.2 LIMITATIONS: Consider the following application limitations before using this equipment:
User Instruction Manual Standing Seam Roof Anchor This manual is intended to meet the Manufacturer s Instructions, and should be used as part of an employee training program as required by OSHA. Figure
BSI BSI 5200 THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL
THE NEW CAST 60 FITTINGS AN EASY ASSEMBLY A KNOWN PRODUCT, SAFE AND RELIABLE AVAILABLE IN CARBON AND STAINLESS STEEL 55 THEORY OF OPERATION The CAST S.p.A. fitting according to the norms, is a mechanical
Product Catalog. Phone: (877)
Product Catalog Phone: (877) 409-8590 Introduction Brand History Bison High Purity is a brand of BPE fittings exclusively distributed by Tru Flow LLC based in Westminster CO. The BHP brand was developed
DN 3/8" to 4" Female BSP - 10 C C Max Pressure : 16 Bars up to DN 2 Specifications : Removable stainless steel filter Female / Female
Size : Ends : Min Temperature : Max Temperature : DN 3/8" to 4" Female BSP - 10 C + 120 C Max Pressure : 16 Bars up to DN 2 Specifications : Removable stainless steel filter Female / Female Materials :
KDV HIGH ACCURACY GLASS TUBE ROTAMETER
KDV HIGH ACCURACY GLASS TUBE ROTAMETER Flow Pressure Level Temperature measurement monitoring control S2 Industrial and Sanitary Designs Body Sizes 1/2 Through 2 Reliable, Time Proven Glass Tube Design
Materials : Carbon steel ASTM A216 WCB
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 400 ( NPS 2" to 16" ) Flanges R.F. Class 150 (PN20) - 29 C + 425 C Max Pressure : 20 Bars Specifications : Removable stainless
>B< Press Range. SALES: +44 (0) FAX: +44 (0) WEB:
>B< Press Range SALES: +44 (0)121 557 2831 FAX: +44 (0)121 520 8778 WEB: ibpconex.co.uk EMAIL: sales@ibpgroup.com 74 75 MATERIAL TUBE SPECIFICATION SIZE 6mm to 18mm 22mm 28mm to 54mm N o of turns 11 4
Shut-off ball valve Type GBC
Data sheet Shut-off ball valve GBC shut-off ball valves, type GBC, are manually operated shut-off valves suitable for bi-directional flow. The GBC valves are used in liquid, suction and hotgas lines in
Precision Duct Systems 4570 Commerce Cir SW Atlanta, GA Phone (404)
Project Name: Engineer: Contractor: Section Number: Date Submitted: Date Approved: Pressure Class: Material Type: Connections: 2005 Up to 10 wg 1995 2 wg pos 1995 4 wg pos 1995 10 wg 2005 neg WG: 1995
JSHM Series Hand Metering Valves
Hand metering valve for precise manual control of iopharm and Pharmaceutical gas or liquids The JSHM Series allows precision manual adjustment of pharmaceutical liquid and gas flows. These valves are most
MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-2A
INCH-POUND MS19D April 199 Superseding MS19C 18 July 198 MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-A This specification is approved for use by
MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-2A
INCH-POUND MS19D April 199 Superseding MS19C 18 July 198 MILITARY SPECIFICATION SHEET SCREW, MACHINE, PAN HEAD, CROSS-RECESSED, CORROSION RESISTANT STEEL, UNC-A This specification is approved for use by
Declaration of performance
1. Unique identification code of the product-type: Declaration of performance No. 9174 030 DOP 2013-06-17 Double wall chimney system type DW-ECO 304/ DW-ECO 316 according to 2. Type, batch or serial number
Tank Blanketing Regulators
Tank Blanketing Regulators Low-Pressure Reducing Regulator Type BR Low-Pressure Relief Valve Type BS Description Tank blanketing, or padding, is the process and practice of covering a stored commodity,
>B< Press Range. SALES: +44 (0) FAX: +44 (0) WEB:
>B< Press Range SALES: +44 (0)121 557 2831 FAX: +44 (0)121 520 8778 WEB: ibpconex.co.uk EMAIL: sales@ibpgroup.com 74 75 MATERIAL TUBE SPECIFICATION SIZE 6mm to 18mm 22mm 28mm to 54mm N o of turns 11 4
JUMO dtrans p30 Pressure Transmitter
609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +49 661 600-0 Fax: +49 661 600-607 Phone: +44 179 6 55 Data Sheet 40466 Page 1/6 JUMO dtrans p0 Pressure Transmitter General application Pressure
1 Overview. Pressure Measurement Single-range transmitters for general applications. 1/22 Siemens FI US Edition
Siemens AG 07 SITRANS LH00 Transmitter for hydrostatic level Overview Function U const. p U I EM The pressure transmitter SITRANS LH00 is a submersible sensor for hydrostatic level measurement. The pressure
Shut-off ball valve Type GBC
Data sheet Shut-off ball valve GBC Danfoss shut-off ball valves, type GBC, are manually operated shut-off valves suitable for bi-directional flow. The GBC valves are used in liquid, suction and hotgas
Overflow valves Type OFV REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction....................................................................................... 3 Features...........................................................................................
Wire Rope and Accessories
Wire Rope and Accessories 87 88 WIRE ROPE AND ACCESSORIES Technil information Crane Types and Rope Names Boom hoisting rope Staying rope Crab rope Staying rope Boom hoisting rope Balancing rope Jib staying
Air Distribution Corporation Spiral Duct and Fittings are manufactured in accordance with applicable SMACNA, ASHRAE and SPIDA standards.
ir istribution orporation Spiral uct and Fittings onstruction Standards ir istribution orporation Spiral uct and Fittings are manufactured in accordance with applicable SMN, SRE and SPI standards. Galvanized
Tank Blanketing Regulators
Tank Blanketing Regulators Low-Pressure Reducing Regulator Type BR Low-Pressure Relief Valve Type BS Description Tank blanketing, or padding, is the process and practice of covering a stored commodity,
Torque Specifications
SENR3130-10 Torque Specifications All Caterpillar Products S/N From the library of Barrington Diesel Club CONTENT General Information 01/07/2005 Introduction to Torque 01/07/2005 Torque-Turn 01/07/2005
SECURITY AND CONFIDENCE AT HEIGHT
Detachable Cable Sleeve SECURITY AND CONFIDENCE AT HEIGHT THE ULTIMATE IN FALL PROTECTION THE DANGERS OF WORKING AT HEIGHT Every day, workers around the world climb ladders to great heights to get their
INSTRUCTION MANUAL Pressure Relief Device LPT
INSTRUCTION MANUAL Pressure Relief Device LPT 5COV475800 LPT REV00 CONTENT: 1 SAFETY 1.1 Safety instructions 2 1.2 Specified applications 2 1.3 Safety notes on the equipment operation 2 2 PRESSURE RELIEF
ANDERSON GREENWOOD TYPE 4020 ATMOSPHERIC PRESSURE AND VACUUM RELIEF VALVES
Weight or spring loaded valves capable of providing pressure and vacuum relief that vent to atmosphere. esigned and tested to reduce costs and emissions with higher flow capacities and industry leading
Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]
![Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]](/thumbs/94/120596583.jpg "Belt strength. Available the belt. (kg/m) PP - Polypropylene 2, to [B] PE - Polyethylene 1, to [B]")
SERIES E20 FLAT TOP Eurobelt Series E20 Flat Top, due to a closed surface configuration, is the suitable conveyor belt for those applications in which it is not necessary any drainage through the belt
>B< Press Range. SALES: +44 (0) FAX: +44 (0) WEB:
>B< Press Range SALES: +44 (0)121 557 2831 FAX: +44 (0)121 520 8778 WEB: ibpconex.co.uk EMAIL: sales@ibpgroup.com 74 75 MATERIAL TUBE SPECIFICATION SIZE 6mm to 18mm 22mm 28mm to 54mm N o of turns 11 4
ISO 4344 INTERNATIONAL STANDARD. Steel wire ropes for lifts Minimum requirements. Câbles en acier pour ascenseurs Exigences minimales
INTERNATIONAL STANDARD ISO 4344 Second edition 2004-02-01 Steel wire ropes for lifts Minimum requirements Câbles en acier pour ascenseurs Exigences minimales Reference number ISO 2004 PDF disclaimer This
DuPont Kalrez PARTS AVAILABILITY LIST
Kalrez PARTS AVAILABILITY LIST Standard parts list AS-568A O-rings Availability Many AS-568A O-rings in standard compounds compounds may be available may be for available immediate for shipment immediate
GUKO FDA. einfach. gut. beraten.
GUKO FDA Size : Ends : Min Temperature : Max Temperature : DN 25 to 300 Flanges PN10/16-25 C + 90 C Max Pressure : 16 Bars Specifications : Absorb vibrations and noise Linear and angular compansion Inner
2 Overview. SITRANS P measuring instruments for pressure. Transmitters for gage and absolute pressure. Z series for gage pressure
Z series for gage pressure Overview Design The main components of the pressure transmitter are: Brass housing with silicon measuring cell and electronics plate Process connection Electrical connection
Series SG SANITARY PRESSURE GAUGE
Series SG SANITARY PRESSURE GAUGE PRESSURE GAUGES REOTEMP SG sanitary gauges are specially designed to meet the demanding safety requirements of the food, dairy, beverage, pharmaceutical, and biotech applications.
LESER Global Standard Tightness Test. Content
LESER Global Stanar Page 1/29 Content 1 Purpose... 1 2 Scope... 1 3 References... 1 4 Introuction... 2 5 Test Proceures at LESER... 3 6 Test Equipment at LESER... 3 7 Seat tightness test proceure, Test
Materials : Forged carbon steel A105N
Certificate 3.1 Size : Ends : Min Temperature : Max Temperature : DN 1/4" to 2 Female - Female BSP or NPT, Socket Welding - 29 C + 425 C Max Pressure : 136 Bars (Class 800) Specifications : With draining
ZUERCHER MRCib Series
Pressure/Vacuum Rating Max inlet pressure: 16 bar Full Vacuum Leak Tight to EN 12266-1:2003 Leakage rate A For T = -10 C to +150 C: Leakage rate A For T = -20 C to -10 C: Leakage rate C Control Spring
SECTION 13. Fall Protection
SECTION Fall Protection Personal fall arrest products and systems have advanced tremendously in the last 10 years. ANSI and OSHA regulations have much to do with clear and stringent requirements that have
Liquid level regulating valves Types PMFL / PMFH and SV
Data sheet Liquid level regulating valves Types / PMFH and SV For modulating liquid level control in refrigeration, freezing and air conditioning plant, a system comprising a liquid level regulating valve