Air Distribution Corporation Spiral Duct and Fittings are manufactured in accordance with applicable SMACNA, ASHRAE and SPIDA standards.
|
|
- Gwendoline Hodges
- 6 years ago
- Views:
Transcription
1 ir istribution orporation Spiral uct and Fittings onstruction Standards ir istribution orporation Spiral uct and Fittings are manufactured in accordance with applicable SMN, SRE and SPI standards. Galvanized or Stainless Steel Gauge Table for 2005 SMN uct Standard up to 10 W.G. Static Pressure Size ia. Gauge Schedule Spiral Pipe Size ia. luminum Thickness Spiral Pipe N Size ia. Gauge Schedule Fittings Up to W.G. Fittings conform to SMN seal lass construction Up to 10 W.G. Fittings conform to SMN seal lass construction luminum Gauge Table for 2005 SMN uct Standard up to + W.G. & - W.G. Static Pressure Gauge Size ia. luminum Thickness Fittings Fittings conform to SMN seal lass construction Thickness/Weight Relationships of Standard Materials Galvanized Steel Nominal Thickness (inches) Nominal Weight (lb/sq ft) Nominal Thickness (inches) Stainless Steel (304 or 316) Nominal Weight (lb/sq ft) Nominal Thickness (inches) luminum Nominal Weight (lb/sq ft) STM Material Specifications Standard Material Galvanized Steel Stainless Steel luminum STM Number 653,
2 ir istribution orporation imensional ode & Ordering Information IMENSIONING OE ll dimensions are in inches, all angles are in degrees -Main barrel inlet diameter - Main barrel outlet diameter or - ranch tap diameter (Note: On tee and lateral fittings with two taps, is the branch closest to the inlet of the fitting. On cross fittings, is the larger of the two taps. R - enter ine Radius V - ody length of fitting - See oloss Tee ORERING Specify type of fittings and list the following dimensions: EOWS -, R TEES -,, (, ) TERS -,, (, ) ROSSES -,,, () ESSORIES - s Noted ll fittings, unless noted, are sized as a male part on each end for a slip joint assembly with spiral pipe. For flanged fittings see connectors detail for all dimensioning. 2
3 ir istribution orporation EOWS 90 IE STMPE EOW 3 I. TRU 1 I. E90P 45 IE STMPE EOW 3 I. TRU 1 I. E45P R=1.5 x R=1.5 x 90 5-P EOW E P EOW E R=1.5 x R=1.5 x 90 2-P MITRE EOW EM90 No. of vanes USTOM EOW XE * R=1.5 x *SPEIFY (Elbow ngle & Radius of enterline 3
4 ir istribution orporation STRIGT TEES STRIGT TEE T REUING TEE TR = - V=+ V=+ TEE ROSS TX REUING TEE ROSS TXR = - V=+ V=+ > > 4
5 ir istribution orporation ONI TEES ONI TEE T REUING ONI TEE TR = V=+6 V=+6 ONI TEE ROSS TX REUING ONI TEE ROSS TXR = V=+6 V= > > 5
6 ir istribution orporation STRIGT TER 45 TER 45 REUING TER R = - V=(x1.414)+ V=(x1.414)+ 45 TER ROSS X 45 REUING TER ROSS XR = - V=(x1.414)+ V=(x1.414)+ > > 6
7 ir istribution orporation OOSS TEES OOSS TEE T REUING OOSS TEE TR = - V=++ V=++ 3 thru 8 9 thru thru and up thru 8 9 thru thru and up OOSS TEE ROSS TX REUING OOSS TEE ROSS TXR = - V=++ V=++, 3 thru 8 9 thru thru and up 1 > >, 3 thru 8 9 thru thru and up 1 7
8 ir istribution orporation MISENEOUS ONENTRI REUER R V=- EENTRI REUER RE V=- V V PIPE OUPING ME NP FITTING OUPING F ROUN NING MPER R EN P ES 8 8
9 ir istribution orporation MISENEOUS OFFSET Z ROUN TO ROUN ZR V O Z V Z Z V STNR = 2 x V STNR = 2 x UE VEE V TPERE Y RN Y 45 R RR 45 UE TEE T V=+4" No. of vanes REUING UE TEE TVR 1 V=+4" 2 No. of vanes = - 2 = - 9
10 ir istribution orporation TRNSITIONS ONENTRI RETNGUR TO ROUN RTR- V x NON-ONENTRI RETNGUR TO ROUN RTR-N V O2 O1 x 10
11 ir istribution orporation ROUN TPS STRIGT TP ST ONI TP ST ½ ½ 1 = PIPE IMETER = PIPE IMETER TER TP 45 ST ½ OOSS TP EST ½ 3 thru 8 9 thru thru and up 1 = PIPE IMETER EMOUT STRT TP < 18 ia, = 6 > 18 ia, = 3 = PIPE IMETER ONI STRT TP T STRT TPS R 3 = + 4 = + 2 1/2 11
12 ir istribution orporation RETNGUR TPS RST-R RST-TI RST-TO = Pipe iameter = Pipe iameter = Pipe iameter & re Inside imensions 45RST-R 45RST-TI 45RST-TO = Pipe iameter ody eight = 6 = Pipe iameter ody eight = 6 = Pipe iameter & re Inside imensions ody eight = 6 12
13 ir istribution orporation ONNETORS Slip Fit onnection ccuflange onnection 3/8" 1-3/8" #8 Tek Screw or larger Space 10 O.. SIE VIEW PIPE #10 Tek Screw Screws by Others Space 6 O.. 5/16 thick by 3/ wide closed cell neoprene gasket by others. Sealant Spiral Pipe - ustomer specified duct length shall be flange face to flange face dimension. 13
14 ir istribution orporation pproximate Weight Spiral uct IMETER WEIGT PER FOOT 26 Gauge 24 Gauge 22 Gauge 20 Gauge 18 Gauge 16 Gauge In pounds per linear foot - ased on galvanized steel 14
15 ir istribution orporation FITTINGS RT E90 E45 EM90 XE R RE T TR TX TXR TVR T T TR TX TXR V Y T TR TX TXR RTR- RTR-N R X XR Z R ST ST ST EST T NP F ES RST-R RTS-TI RST-TO 45RST-R 45RTS-TI 45RST-TO 15
DUAL WALL ROUND DUCT AND FITTINGS CONSTRUCTION STANDARDS
ir istribution orporation ouble Wall ROUN U W ROUN UT N FITTINGS ONSTRUTION STNRS Outer Shell Positive Pressure Gauge selection for galvanized (STM 653). Fittings are manufactured with standing seam, welded
More informationSPIRAL PIPE - OVAL SINGLE WALL
SPIRAL PIPE - OVAL SINGLE WALL Duct Direct Pipe and Fittings are manufactured in accordance with 2005 SMACNA Duct Construction Standards (1995 SMACNA Standards on request) OVAL SUBMITTAL Oval Single Wall
More informationButtweld Fittings ANSI B16.9, ANSI B16.28, MSS-SP-43, MSS-SP-95, MSS-SP-97
uttweld Fittings NSI 16.9, NSI 16.28, SS-SP-43, SS-SP-95, SS-SP-97 90 LR ELOWS 45 LR ELOWS 180 LR ELOWS 90 SR ELOWS oncentric and eccentric reducers, equal and reducing tees, 45 and 90 elbows, buttweld
More informationPrecision Duct Systems 4570 Commerce Cir SW Atlanta, GA Phone (404)
Project Name: Engineer: Contractor: Section Number: Date Submitted: Date Approved: Pressure Class: Material Type: Connections: 2005 Up to 10 wg 1995 2 wg pos 1995 4 wg pos 1995 10 wg 2005 neg WG: 1995
More informationASTM A182 STAINLESS HIGH PRESSURE FITTINGS INDEX
STM 182 STINLESS HIH PRESSURE FITTINS INEX 90 ELOW / ROSS / TEE / 45 ELOW - SOKET 46 OUPLIN / HLF OUPLIN / P - SOKET 47 90 ELOW / ROSS / TEE / 45 ELOW - THREE 48 OUPLIN / HLF OUPLIN / P - THREE 49 REUIN
More informationRectangular-k27 Duct and Fittings Dimensions
An enterprise of United McGill Corporation - Founded in 1951 One Mission Park Groveport, Ohio 43125-1149 614/836-9981, Fax: 614/836-9843 E-mail: mcgillairflow@compuserve.com Web site: http://www.mcgillairflow.com
More informationSaf-T Vent EZ Seal Plus
Technical and Dimensional Data Saf-T Vent EZ Seal Plus Single Wall L 29-4 Stainless Steel Special Gas Vent Tested and Listed to UL 1738/UL S636 by Underwriters Laboratories, Inc 5030 orporate Exchange
More informationReservoir End Covers Type EC
Other Reservoir ccessories imensions / Technical ata / Order odes Reservoir End overs Type E H Ø2 Ø1 7 Gauge Steel haracteristics Materials End cover made of 7 Grade Steel (pickled and oiled); Stainless
More informationPipe threads for tubes and fittings where pressure-tight joints are not made on the threads. (requires PTFE sealing tape or liquid sealant).
Fittings for CO 2 Pipe Threads Pipe thread references quoted in this catalogue conform with the requirements specified in the latest issue and amendments of the following ISO Standards: ISO 7-1 (BS21)
More informationProducts no longer available
Technical ata sheet R7..R Open-close ball valves, 3-way, with flange PN 6 for open an close col an warm water systems for switching functions on the water sie an 2-point controls in air-hanling an heating
More informationFLAT OVAL DUCT AND FITTINGS
AND FITTINGS www.eccomfg.com ECCO INDEX FITTINGS Accessories... 136 Crosses... 136 Elbows... 137 Gauge Selection... 135 Laterals... 136 Ordering... 135 Tees... 136 Transitions... 135 GALVANIZED Gauge Chart...
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationSECTION 5 CONVEY LINE & CONVEY LINE ACCESSORIES Tubing and Pipe
SETION 5 ONVEY LINE & ONVEY LINE ESSORIES Tubing and Pipe TUING ND PIPE STRIGHT LENGTHS vailable in cut-to-length; 20-ft to 40-ft random lengths vailable in: galvanized steel MTERIL FORM ITEM NUMER DESRIPTION
More informationProducts no longer available
Technical ata sheet R7..R haracterize control valves, 3-way, with flange PN 6 for open an close col an warm water systems for moulating control on the water sie of air-hanling an heating systems air bubble-tight
More informationASYBCO 90 O ELBOW LONG RADIUS O.D. I.D.
90 O ELBOW LONG RADIUS Standard weight Extra strong Schedule 160 Double extra strong ASTM A-234 ASME / ANSI B16.9 Carbon and ferritic alloy steel Produced from X-rayed, stress-relieve welded pipe. Welds
More informationQuality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
More informationAWWA Pipe Flanges. AWWA C Standard Steel Hub Flanges Class D AWWA C Standard Steel Hub Flanges Class E AWWA C Flange Manufacturer
WW Pipe Flanges WW Flanges are commonly used in waterworks, wastewater, slurry, plant piping or other light duty applications generally requiring pressures of less than 300 psi. Pressure ratings for WW
More informationInserta Products, Inc.
CODE 6 & 6 -BOLT SPLIT TYPE The INSERTA CODE 6 and CODE 6 -Bolt, Split Flange Type, Modular Connectors, are used in integrated hydraulic systems in place of welded and threaded pipe fittings. These are
More informationTHREAD/SCREW - Drill & Tap Chart
Machine Screw THREAD/SCREW Drill & Tap Chart Threads Per Inch Min Dia Alum, Brass, & Plasitcs 75% Thread Tap Drills Stainless Steel, Steels & Iron 50% Thread Clearance Hole Drills Close Fit All Materials
More informationTOTALINE BRASS FITTINGS
LONG NUT SHORT NUT & SHORTER NUT TO CAP NUT MALE CONNECTOR WT. PER LONG NUT 1/8 1.20 4000 25 P806-N2-2 3/16 1.70 2500 25 P806-N2-3 1/4 3.44 1400 50 P806-N2-4 5/16 4.60 900 25 P806-N2-5 3/8 7.90 550 50
More informationCALEFFI. Reduced pressure zone backflow preventer. 574 series 01022/18 NA D E C F B D E. Function
Reduced pressure zone backflow preventer series LEFFI 01022/18 N REITE ISO 9001 FM 216 ISO 9001 No. 000 Function The backflow preventer can be used in all plumbing systems where there is danger of the
More informationGalvanized Rigid Conduit
Galvanized Rigid Conduit Conforms To: C80.1 - UL 6 ANSI C-80.1 UL Min. WGT. Per 100 Feet in LBS. INCL. CP. O.D. I.D. Thickness Threads Per Inch Feet Per Lift Color Code Thread Protector 1/2" 79.840.632.104
More informationEPOXY FITTINGS DIMENSIONS
Bulletin No. A150 May 1, 2004 EPOXY FITTINGS DIMENSIONS 2"-16" GREEN THREAD fittings may be used with GREEN THREAD and RED THREAD II piping. Refer to Chemical Resistance Guide, Bulletin No. E5615, for
More informationBrass Tubular. P-Traps. Item # Description Qty
B r a s s T u b u l a r P-Traps 1 1-1/4 17 ga CP P-Trap 1B with brass nuts 1D with box flange 1BD with box flange and brass nuts 115 with 15 wall bend 1B15 with 15 wall bend and brass nuts 1D15 with 15
More informationTechnical Data. Approvals UL and C-UL Listed FM Approved. Maximum Working Pressure 250 psi (7,2 bar) Friction Loss Refer to Graphs A and B
Worldwide ontacts www.tyco-fire.com Model Pipe Line Strainer General Description The welded steel body Model Pipe Line Strainers (Ref. Figures 1 and 2) are designed for installation in the water supply
More information1 Exam Prep. Tabs and Highlights
1 Exam Prep NFPA 14: Standard for the Installation of Standpipe and Hose Systems Tabs and s These 1 Exam Prep tabs are based on the NFPA 14: Standard for the Installation of Standpipe and Hose Systems,
More informationPrecision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
More informationCHECK-VALVES Automatically Position Themselves by the Natural Forces of the Conveying Air. A PNEUMATIC CONVEYING SYSTEM PATENT #: 5,160,222
PATENT #: 5,160,222 PHONE: (913)677-5777 FAX: (913)677-067 E-Mail : techair@techairinc.com www.techairinc.com CHECK-KLEEN DIVERTER A PNEUMATIC CONVEYING SYSTEM FLAP-CHECKS exposed to product air stream
More informationCLARK 200 Series Vortex Flow Transmitter Frequency Output, 1/4 to 1.0 Pipe Sizes, Rugged Molded PPA Construction
www.clarksol.com LRK 200 Series Vortex Flow Transmitter Frequency Output, 1/4 to 1.0 Pipe s, Rugged Molded PP onstruction DESRIPTION The series 200 vortex flow transmitters are designed with equipment
More informationBall Valves. Stainless Steel Ball Valves Pag Pag Pag Pag Pag Pag. 9.
86300 Pag. 9.6 86310 Pag. 9.6 86320 Pag. 9.6 86330 Pag. 9.6 86700 Pag. 9.6 86710 Pag. 9.7 86720 Pag. 9.7 6300 Pag. 9.7 6310 Pag. 9.7 6400 Pag. 9.8 6410 Pag. 9.8 6560 Pag. 9.8 6570 Pag. 9.8 86900 Pag. 9.9
More informationTwo Ferrule Tube Fittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) O.D.
Two errule Tube ittings 316 stainless steel ranging from 1/8" to 1" (6mm to 25mm) valve & fitting www.veelok.com Introduction Vee-Lok tube fittings are designed to provide a leak-free connection and applied
More informationACCREDITED. Function. series 5360/
Pressure reducing valves series 360-36 - 36-366 RIT ISO 900 FM 6 LFFI 06/7 G replaces dp 06/0 G Function Pressure reducing valves are devices which, when installed on a private plumbing system, reduce
More informationSafety relief valves SFV 20-25
MAKING MODERN LIVING POSSIBLE Technical brochure Safety relief valves SFV 20-25 www.danfoss.com/ir Contents Page Introduction........................................................................................3
More informationENGINE/ PUMP ADAPTERS
ENGINE/ PUMP PTERS Hayes Manufacturing, Inc. Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 TRNSMISSION PROUTS Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 Table Of ontents Engine/ Mount
More informationPVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
More informationSafety relief valves Type SFV 20-25
Data sheet Safety relief valves Type SFV 20-25 SFV 20-25 are standard, back pressure dependent safety relief valves in angle-way execution, specially designed for protection of vessels and other components
More informationCOPPER TUBE COPPER AND BRASS FITTINGS SOFT DRAWN COPPER CAPILLARY COUPLER CAPILLARY NOMINAL OD WALL ROLL (M) R410A STOCK CODE CAA0020 1/
COPPER TUBE SOFT DRAWN COPPER NOMINAL OD INCHES MM WALL ROLL (M) CAA0020 1/4 6.4 0.81 18 CAA0040 3/8 9.5 0.81 18 CAA0060 1/2 12.7 0.81 18 CAA0080 5/8 15.9 0.81 18 CAA0100 5/8 15.9 1.02 18 CAA0120 3/4 19.1
More informationHigh Pressure Bleed Valves, Gauge Valves and Block & Bleed Valves
High Pressure leed Valves, Gauge Valves and lock & leed Valves FITOK Group FITOK GmbH (Headquarter) Sprendlinger Landstr., 9 Offenbach am Main, Germany Tel.: +9 9 9 9 Fax: +9 9 9 9 FITOK, Inc. North Promenade
More informationFORGED STEEL STRUCTURAL HARDWARE SINCE 1864
OR STL STRUTURL RWR SIN 1864 T Reference U W P T N T rip L T ONTNTS pplications... 2, 3 levises... 4 leveland ity orge was established in 1864 to primarily manufacture parts for the marine industry. y
More informationGlenair Well-Master TM 260 Micro-D Withstands Extreme High Temperature
Section : Well-Master Micro- + P eader lenair Well-Master TM Micro- Withstands Extreme igh Temperature Standard Micro- connectors are rated for +125. lenair's MWM Micro- can withstand +150 continuous operating
More informationVCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
More informationPlok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation
- Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system
More informationVCO O-Ring Face Seal Fittings
O-Ring Face Seal Fittings www.swagelok.com O-Ring Face Seal Fittings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 Weld, VR,, Pipe, and Vacuum Fittings ontents Technical
More informationBUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-
BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut
More informationEVALUATION SUBJECT: SPUNSTRAND STANDARD AND INSULATED UNDERSLAB DUCTS
ICC-ES Report ESR-1681 Reissued 12/2017 This report is subject to renewal 12/2018 EVALUATION SUBJECT: SPUNSTRAND STANDARD AND INSULATED UNDERSLAB DUCTS DIVISION: 23 00 00 HEATING, VENTILATING AND AIR CONDITIONING
More informationSO 9001 I ACCESSORIES
ISO 9001 ESSORIES ESSORIES INDEX Page In-Line Mounted Flow ontrol Valves 3 In-Line Mounted heck Valves 3 Quick Exhaust, heck and Shuttle Valves In-Line Ported Lockout Valves 5 Mufflers 6 Fittings 7-9 2
More informationHIGH PRESSURE CONTROL VALVES
METERING VALVE APPLICATIONS: This valve can be used to meter or control flow of liquids and/ or gases on meter runs, flow lines, or may be used as a choke under low pressure drop conditions where freezing
More informationTECHNICAL DATA. Notes: For use with Trim Charts on Pages 2-4
Page 1 of 5 Telephone: 29-95-9501 Technical Services: 877-8-5 Fax: 29-8-0 Email: techsvcs@vikingcorp.com Model F Dry Valve with Trim Valve Size Part Number 17PTR 175PTR 17PTR Standard Trim Sets include
More informationDESIGN AND PRE - INSTALLATION INFORMATION
DESIGN AND PRE - INSTALLATION INFORMATION Installation of valves should be in accordance with The Water Supply (Water Fittings) Regulations 1999 and BS6700:1997 Para. 2.2.4 KP Type Valves offer a flexible
More information- Written price quotations are valid for 30 days from the date of the quote unless otherwise noted.
SPECIFICATIONS - All material is solid brass with a #8 mirror finish unless otherwise noted. - All material sold by length is priced in one foot increments. ORDERING PROCEDURE - Use a Purchase Order number.
More informationFunction. brass EN CW617N brass EN CW617N brass EN CW614N. brass EN CW614N brass EN CW617N EPDM
Balancing valves series - cert. n 000 ISO 900 ALEFFI 0/0 GB Function Balancing valves are hydraulic devices that can precisely regulate the flow rate of the fluid that supplies a system s emitters. Hydraulic
More informationSIZING AND CAPACITIES OF GAS PIPING
APPENDIX A (IFGS) SIZING AND CAPACITIES OF GAS PIPING (This appendix is adopted as part of the code.) A.1 General. To determine the size of piping used in a gas piping system, the following factors must
More informationAPPENDIX B TESTING PROTOCOLS. Method A: Straight Test Method B: Angular Deflection Test. Method C: Shear Load Test
APPENDIX B TESTING PROTOCOLS Method A: Straight Test Method B: Angular Deflection Test Method C: Shear Load Test B.1 METHOD A. STRAIGHT PIPE JOINT TEST In order to simulate the straight pipe-joint condition
More informationINTERLOCKED METAL HOSE
INTERLOCKED METAL HOSE HOSE FUNDAMENTALS Penflex interlocked metal hoses are made for a variety of specialized industrial applications and are available in a wide range of metals, styles and sizes. Interlocked
More informationHIGH PRESSURE CONTROL VALVES
METERING VALVE APPLICATIONS: This valve can be used to meter or control flow of liquids and/ or gases on meter runs, flow lines, or may be used as a choke under low pressure drop conditions where freezing
More informationfor for Industrial Refrigeration
Catalogue Shut-off Safety relief and regulating valves valves for for Industrial Refrigeration Contents Page Safety relief valves, type SFA 15 and SFA 15-50....3 Safety relief valves, type SFV 20-25....
More informationStorage Systems and Accessories
Storage Systems and Accessories High Pressure Air and Inert Gases 4500-6000 PSIG DOT and ASME Cylinders High Pressure Storage Systems If an application requires storage, either in the form of a single
More informationHIGH-PRESSURE RELIEF VALVES H-900HP SERIES
IPRSSUR RLI VLVS 9P SRIS TURS n 9P is available as /P products. n 316St.St. onstruction n Service up to psi n Set Pressure from 5 psig to psig ( 3.5 to 414 bar) n Identifying colored springs for each pressure
More informationSR100 Series Service Regulators. Technical Bulletin
SR00 Series Service Regulators Technical Bulletin Model SR00 Series Regulator 0 Elster American Meter The compact, high capacity SR service regulator is designed for residential or light commercial/industrial
More informationBronze-Plated Wear Plates
Slide ction omponents ronze-plated Wear Plates ronze-plated Wear Plates WP -M-E ronze-plated Wear Plates provide a long-lasting wear surface for ronze- Plated molds requiring slides, cams or flat surfaces
More informationNorth American Orifice Metering System
Combustion North American Orifice Metering System 8697 and M8697 Metering Orifices accurately measure gas flows to industrial burners. They are compact, inexpensive, and can be installed in individual
More informationPressure regulator for water
Pressure regulator for water rass version with VGW and international drinking water approvals Stainless steel version with VGW approval Compact plastic version Manometer port at pressure output The water
More informationSIZING AND CAPACITIES OF GAS PIPING
SIZING AND CAPACITIES OF GAS PIPING A.1 General piping considerations. The first goal of determining the pipe sizing for a fuel gas piping system is to make sure that there is sufficient gas pressure at
More informationPVC Electrical Fittings & Accessories Price List
PVC Electrical Fittings & Accessories Price List Effective August 26, 2002 Electrical Products PVC Electrical Fittings & Accessories Price List PVC Electrical Standards 2 Schedule 40 Fittings: Couplings,
More informationCOMMERCIAL. MK Series High Performance Butterfly Valve Specifications. Hot Water, Chilled Water, Condenser Water, Steam
OMMRIL MK Series igh Performance utterfly Submittal/Technical ata ray MK Series igh Performance utterfly Valves NSI lass 150 and 300 ray ontrols ommercial ivision 13788 West Road, Suite 200 ouston, Texas
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
More informationSafety relief valves, type SFA 15
Safety relief valves, type SFA 15 Introduction SFA 15 are standard, back pressure dependent safety relief valves in angle-way execution, specially designed for protection of vessels and other components
More informationRB 4000 Commercial & Industrial Regulator
R 4000 ommercial & Industrial Regulator The R 4000 pressure regulator is designed for industrial use: gas supply networks, district stations, industries, heating plants and all installations where accurate
More informationPunches. True-Point Gage Pin ANSI/ASME. Pages B6 & B7 Pages B8 & B9 Pages B10 S_BP ES_BP _BQ _FQ 8-99 PAGE B1
Contents Section B - Inch Shoulder unches Solid unches Ejector S_R O RE R SS N ES_R O RE R SS N ages B2 & B3 ages B4 & B5 ilot unches True-oint Gage in ANSI/ASME S_RN S_G S_R ages B6 & B7 ages B8 & B9
More informationSIZING AND CAPACITIES OF GAS PIPING
APPENDIX A (IFGS) SIZING AND CAPACITIES OF GAS PIPING (This appendix is informative and is not part of the code. This appendix is an excerpt from the 2003 International Fuel Gas Code, coordinated with
More informationType overview. Technical data. Safety notes
Technical ata sheet hange-over ball valve, 3-way, Flange, PN 6 For close col an warm water systems For switching functions on the water sie an 2-point controls in air hanling units an heating systems ir
More informationEXCEL SELF-ALIGNING BEARINGS AND POWERTRAX LBB BEARINGS
TM S-ININ INR RINS & PIOW OKS 2/3 X S-ININ RINS N POWRTRX RINS X RINS X INR RINS esigned to fit into precision bores, these bearings are self aligning and offer long life. Precision hardened and ground
More informationPTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationFlange Adapters. Threadless, weldless transition from flanged piping systems to tubing systems
www.swagelok.com Flange dapters Threadless, weldless transition from flanged piping systems to tubing systems Flange types meet SM, IN, N, and IS standards One-piece integrally machined forged body vailable
More informationE28/Q28 Safety Exhaust Valve Externally Monitored
E8/Q8 Safety Exhaust Valve Externally Monitored ulletin 9EM4 the total systems approach to air preparation Features Externally Monitored Safety Exhaust Valve Function When applications demand a safe environment
More informationWhen the pressure is on, turn to our high-pressure pumps
When the pressure is on, turn to our high-pressure pumps When you re pumping in a pressurized situation, you need more power than a standard airoperated double diaphragm pump can deliver. That s where
More informationFirestop Products and Systems Estimating Guide
F i rr eessttooppppi ni ng g http://flamesafe.rectorseal.com PRODUCT DATA UPDATES TECH LETTERS DETAILS MSDS CONTACTS FAQS Firestop Products and Systems Estimating Guide Through-penetrations Estimating
More informationMedium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi
Medium Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationPARTS LIST FOR ELBOWS, COUPLERS,TUBING & HOSES
PARTS LIST FOR ELBOWS, COUPLERS,TUBING & HOSES TABLE OF CONTENTS: Canada: 1-888-WALINGA U.S.A.: 1-800-466-1197 ELBOWS, TY S, GALVANIZED... 3 ELBOWS, 45, GALVANIZED... 3 ELBOWS, 90, GALVANIZED... 3 90 TY
More informationThin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1.
Thin pressure gauge G401-W Series Thin, compact design ideal for incorporating devices. Suitable for filter regulator, regulator, and pressure switch (P4000-W). onnection: O ring seal, set screw G401-W
More informationTypes 95L and 95H Pressure Regulators
Instruction Manual Form 1151 Types 95L and 95H July 1990 Types 95L and 95H Pressure Regulators W1888 W1888 W5652 Figure 1. NPT Body (Left), NPT Body (Middle), and Flanged Body (Right) Pressure Regulators
More informationGUARDEX Pump/Motor Mounts & Couplings
GURIN PMM 00 GUREX /Mor Mounts & ouplings ME IN U.S.. 300 Hwy 212 PO ox 7 Michigan ity, IN 6360 (219) 7-52 Fax (219) 79-663 www.guardiancouplings.com TLE OF ONTENTS Engine/ Mount Part Selection 2 Flexible
More informationSafety relief valves, type SFA 15 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves, type SFA 15 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction...3 Features...3 Technical data...4 Design...5 Capacity...6 Material specification...............................................................................8
More informationRECTANGULAR CONNECTORS
RETNGULR ONNETORS FN360 Series FN-365P FN-365J FN-364P FN-364P FN-364J FN-364J FN-365P FN-365J FN-364P FN-364J FN-362J FN-363J FN-365P FN-367J FN-365P FN-364P FN-361P With type cover FN-365J FN-364P With
More informationl DESCRIPTION l FEATURES l LIMITATIONS l TYPICAL APPLICATIONS l MATERIAL SPECIFICATIONS TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6
www.ucanfast.com TECHNICAL MANUAL SECTION 2.3 PAGE 1 / 6 l DESCRIPTION The UCAN WAG anchor is a fully threaded torque controlled expansion anchor assembled with a three segment expansion clip. All parts
More informationSelf-operated Regulators Accessories Differential Pressure and Flow Regulators
Self-operated Regulators Accessories Differential Pressure and Flow Regulators Compression-type fittings Needle valves Compensation chambers Orifice plates Welding neck flanges Control lines Application
More informationFittings, Materials and Tubing Guide. Instrumentation Products
Fittings, Materials and Tubing Guide Fittings, Materials and Tubing Guide Instrumentation Products MPI Medium Fittings Introduction Hannifin Fittings are engineered and manufactured to provide secure,
More informationOPTIONS. Mounting ACCESSORIES FLEXAC.CLIP FLEXAC.EC FLEXAC.P6 FLEXAC.4.C04 FLEXAC.4.C10 PERFORMANCE
FLEX 4 FLEX features driver-less LE technology R9 Values of 60+ Optically clear thermoplastic coating rated for IP65, interior or exterior This product can run up to 100 ft from a single feed with uniform
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationAMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS
AMTEC SUPPORT GRIPS STANDARD, HEAVY DUTY & CONDUIT GRIPS DESIGNED TO HOLD THE WEIGHT FOR ELECTRICAL CABLE AS IT HANGS IN VERTICAL, SLOPING OR HORIZONTAL POSITIONS. EASILY INSTALLED AND REMOVED USING NO
More informationLOKRING Stainless Steel (SS40) and Carbon Steel (CS) Pipe Fittings Table of Contents
38376 APOLLO PARKWAY WILLOUGHBY, OHIO USA 44094 www.lokring.com LOKRING Stainless Steel (40) and Carbon Steel (CS) s Table of Contents Information Page 2.. Design Page 3-4.. Pressure and Temperature Ratings
More informationNominal Wall Thickness Steel Only in. (mm) Outside Diameter With PVC in. (mm)
PVC-Coated Conduit The ultimate in corrosion protection! OCAL-BLUE Conduit Hot-dip galvanized steel or aluminum conduit. Nominal.00 ( mils) blue urethane coating on interior. Hot-dipped galvanized threads
More informationDuct Technical Information TECHNICAL INFORMATION & DIMENSIONS
TECNICA INFORATION & DIENSIONS Contact Spears for any Information not found. Due to aterial Cost Variations, Prices Subject to Change. Check On-line Catalog @ www.spearsmfg.com Page 236 Fume & Air Duct
More informationVK/VP SERIES : Sealless Vertical Pump. Assembling Instructions 2010
VK/VP SERIES : Sealless Vertical Pump Assembling Instructions 2010 20610 Manhattan Place Suite 116 Torrance, CA 90501 Phone: 310-328-9114 Fax: 310-328-9441 1. Motor Shaft and Pump Base (1) (2) Place a
More informationHigh Pressure Equipment Medium Pressure Valves, Fittings and Tubing
igh Pressure quipment Medium Pressure Valves, ittings and Tubing service igh Pressure quipment Company has developed a line of Medium Pressure products to assure safe and easy plumbing through. These needle
More informationWe reserve the right to make changes without prior notice. Therefore, all designs, specifications, and product features are subject to change without
Flat Oval Catalog We reserve the right to make changes without prior notice. Therefore, all designs, specifications, and product features are subject to change without notice. The company and its products
More informationIndustrial Compression Style Fittings
Industrial Compression Style Fittings Compression Fittings Compress-lign Fittings rass etric Compression oly-tite Fittings i-uty Fittings arker annifin Corporation Fluid System Connectors Otsego, I Industrial
More informationWorld Area Differences Technical Information
World Area Differences Technical Information DMISC2047X02 This document is to give more information about the following: Porting & Threads Cleaning Procedures Conversion Tables PORTING & THREADS NPT (National
More informationMaterials : Galvanized steel flanges
Size : Ends : Min Temperature : Max Temperature : DN 32 to 200 Flanges PN10/16-10 C + 80 C Max Pressure : 16 Bars Specifications : Absorb vibrations and noises Linear and angular compansion Single NBR
More informationGUMMIKOMPENSATOR GKF8000 / GKF8130
GUMMIKOMPENSATOR GKF8000 / GKF8 Size : Ends : Min Temperature : Max Temperature : DN 32 to 600 Flanges PN10/16-10 C + 100 C for EPDM and + 80 C for NBR Max Pressure : 16 Bars up to DN 300 Specifications
More information