Punches. True-Point Gage Pin ANSI/ASME. Pages B6 & B7 Pages B8 & B9 Pages B10 S_BP ES_BP _BQ _FQ 8-99 PAGE B1

Transcription

1 Contents Section B - Inch Shoulder unches Solid unches Ejector S_R O RE R SS N ES_R O RE R SS N ages B2 & B3 ages B4 & B5 ilot unches True-oint Gage in ANSI/ASME S_RN S_G S_R ages B6 & B7 ages B8 & B9 ages B10 unch Blanks Quill unches S_B ES_B _BQ _FQ ages B11 ages B AGE B1 Copyright, 1999 AI unch All Rights Reserved.

2 Shoulder unches Round 05 Shape to.001 / to T + available in 1/4 increments excluding 3.25 and R B o 0 o 180 o 270 o Body escription ength Round Range Shape iameter Range oint Shapes Min. Max. /G 3/16 (.1875) S /4 (.250) S /16 (.3125) S /8 (.375) S /2 (.500) S /8 (.625) S /4 (.750) S75 R (1.000) S100 O /16 (.1875) S18B G 1/4 (.250) S25B G /16 (.3125) S31B /8 (.375) S37B R 5/16 (.3125) S31C /8 (.375) S37C RE R Includes Square Includes Square /2 (.500) S50C /8 (.375) S /2 (.500) S /8 (.625) S /4 (.750) S See Section K for additional shape options 5/8 (.625) S62E See Section K for SS standard profile options 3/4 (.750) S75E N (1.000) S100E AGE B2 Inch Shoulder unch 1of AI unch

3 escription (code/point shape) over-all-length or, point dimensions EXAME: 6 S62-O EXAME: 6 S62-O 3.50 M M, M or dimensions smaller than standard Modified Standards Ref. M (Round) oint length other than standard EXAME: 6 S62-O Ref. M (Shape) B Ref. Modified standards Max or M min (Rounds) S S S S S S S S Max or M min (Shapes) S S S S S S S S oint ead ead ength ia. Thick B T S S S S S S S S S18B S25B S31B S37B S31C S37C S50C S S S S S62E S75E S100E Ref. T Ref. Ref M MN Nitride; wear resistant surface treatment, M2 only. Min. M M MKF/MS Alternate key flat or dowel slot locations may be specified using the proper code letters, MKF or MS with degrees, clockwise from 0 O when viewing point end of punch. See Section K for addition information. 6 S62-O MKF135 O 90 O MKF135 O Alternate ocation Standard ocation 0 O 180 O 270 O N Titaniun Nitride (V); coating for added wear resistant, M2 only. M Reduced ength 6 S62-O M M recision length, same as M, except is held to ± S62-O M Straight before Radius, alternate to 6 S62-O Reduced head thickness T (shortens ) 6 S62-O recision head thickness T, same as, except T is held to ± S62-O M Reduced head diameter (Min. 1) 6 S62-O M.68 See Section K for additional surface treatment types and applications Inch Shoulder unch 2 of 11 AGE B AI unch

4 Ejector Shoulder unches Round 05 Shape to.001 / to T + available in 1/4 increments excluding 3.25 and R B o 0 o 180 o 270 o Body escription ength Round Range Shape iameter Range oint Shapes Min. Max. /G 3/16 (.1875) ES /4 (.250) ES /16 (.3125) ES /8 (.375) ES /2 (.500) ES /8 (.625) ES62 R /4 (.750) ES75 O (1.000) ES G G 3/16 (.1875) ES18B /4 (.250) ES25B /16 (.3125) ES31B.020R /8 (.375) ES37B RE R Includes Square Includes Square 5/16 (.3125) ES31C /8 (.375) ES37C /2 (.500) ES50C /8 (.625) ES /4 (.750) ES75 See Section K for additional shape options See Section K for SS standard profile options N (1.000) ES100E AGE B4 Inch Shoulder unch 3 of AI unch

5 escription (code/point shape) over-all-length or, point dimensions EXAME: 6 ES62-O EXAME: 6 ES62-O 3.50 M M, M or dimensions smaller than standard Modified Standards Ref. M (Round) oint length other than standard EXAME: 6 ES62-O Ref. M (Shape) B Ref. Modified standards Max or M min (Rounds) ES ES ES ES ES ES ES ES Max or M min (Shapes) ES ES ES ES ES ES ES ES oint ead ead Ejector ength ia. Thick in B T ES E ES E ES E ES E ES E ES E ES E ES E ES18B E ES25B E.75 ES31B E ES37B E ES31C E ES37C E ES50C E ES E ES E 1.50 ES100E E Ref..75 Min. T Ref. MKF/MS Alternate key flat or dowel slot locations may be specified using the proper code letters, MKF for MS with degrees, clockwise from 0 O when viewing point end of punch. See Section K for addition information. 6 ES62-O MKF135 O MKF135 O Standard ocation Ref M 90o 270 o 0 o 180 o MN Nitride; wear resistant surface treatment, M2 only. Min. M M M Reduced ength 6 ES62-O M M recision length, same as M, except is held to ± ES62-O M Straight before Radius, alternate to 6 ES62-O Reduced head thickness T (shortens ) 6 ES62-O recision head thickness T, same as, except T is held to ± ES62-O M Reduced head diameter (Min. 1) 6 ES62-O M.68 N Titaniun Nitride (V); coating for added wear resistant, M2 only. See Section K for additional surface treatment types and applications Inch Shoulder unch 4 of 11 AGE B5 Alternate ocation 1999 AI unch

6 over-all-length, less E diameter point size EXAME: 6 S50-RN EXAME: 6 S50-RN 3.09 M.181 M dimensions smaller than standard Ref. Modified Standards oint length other than standard EXAME: 6 S50-RN 3.09 * B Ref. Modified standards M & oint Size To oint ength Ratios M Max or M min S18-RN S25-RN S31-RN S37-RN S50-RN S62-RN S75-RN S100-RN oint ead ead ength ia. Thick B T S18-RN S25-RN S31-RN.90* S37-RN S50-RN S62-RN S75-RN S100-RN S18B-RN S25B-RN S31B-RN S37B-RN S31C-RN S37C-RN S50C-RN S37-RN S50-RN S62-RN S75-RN S62E-RN S75E-RN S100E-RN N Bullet Nose radius, alternate to std. ( E unchanged) 6 S50-RN N Ref. E Ref. E Ref. MN Nitride; wear resistant surface treatment, M2 only. T Ref. Ref. M N (Radius) Min Ṁ ME ME Revised E 6 S50-RN ME.16 M Reduced ength 6 S50-RN M Straight before Radius, alternate to 6 S50-RN Reduced head thickness T (shortens ) 6 S50-RN recision head thickness T, same as, except T is held to +/05 6 S50-RN M Reduced head diameter (Min. 1) 6 S50-RN M.56 N Titaniun Nitride (V); coating for added wear resistant, M2 only. See Section K for additional surface treatment types and applications Inch Shoulder unch 6 of 11 AGE B AI unch

7 Shoulder Gage in ilots Round to T available in 1/4 increments.5 R B R 40 o E Flat Shank ilot ength oint iameter Nose Range Range E 3/8 (.375) S37-G /2 (.500) S50-G =.375 = /8 (.625) S62-G /4 (.750) S75-G E=.30 E= (1.000) S100-G /8 (.375) S37B-G /2 (.500) S50B-G =.625 = /8 (.625) S62B-G /4 (.750) S75B-G E= (1.000) S100B-G E= /8 (.375) S37C-G /2 (.500) S50C-G /8 (.625) S62C-G = /4 (.750) S75C-G (1.000) S100C-G /2 (.500) S50-G E=1.00 5/8 (.625) S62-G /4 (.750) S75-G (1.000) S100-G AGE B8 Inch Shoulder unch 7 of AI unch

8 over-all-length, less E diameter point size EXAME: 6 S50-G M dimensions smaller than standard EXAME: 6 S50-G 4.00 M.220 Modified Standards oint length other than standard EXAME: 6 S50-G Ref. B Ref. M Modified standards M & oint Size To oint ength Ratios Max or M min S37-G S50-G S62-G S75-G S100-G oint Nose ead ead ength ength ia. Thick B E T S37-G S50-G S62-G S75-G S100-G Ref. T Ref. Ref. M Min. M M Reduced ength 6 S50-G M Straight before Radius, alternate to 6 S50-G S37B-G S50B-G S62B-G S75B-G S100B-G S37C-G S50C-G S62C-G S75C-G S100C-G S50-G S62-G S75-G S100-G MN Nitride; wear resistant surface treatment, M2 only. Reduced head thickness T (shortens ) 6 S50-G recision head thickness T, same as, except T is held to +/05 6 S50-G M Reduced head diameter (Min. 1) 6 S50-G M.56 N Titaniun Nitride (V); coating for added wear resistant, M2 only. See Section K for additional surface treatment types and applications Inch Shoulder unch 8 of 11 AGE B AI unch

9 Shoulder ilot unches (ANSI/ASME B94.18-R1995) Replaces S1615 thru S168. Refer to pages B6 thru B9 for new pilot styles. Round to T available: 1.59, 1.84, 2.09, 2.34, 2.59, 2.84, 3.09, 3.34, 3.59, 3.84 and R Blend Radius 40 O B +.06 Flat Shank ength oint ilot oint ead iameter Range Range Nose ength im. E B T 3/16 (.1875) S18-R /4 (.250) S25-R /16 (.3125) S31-R /8 (.375) S37-R =.062 to /2 (.500) S50-R /8 (.625) S62-R /4 (.750) S75-R E=.16* (1.000) S100-R *slightly less for dias. under.187 3/16 (.1875) S18B-R /4 (.250) S25B-R /16 (.3125) S31B-R /8 (.375) S37B-R /16 (.3125) S31C-R =.376 to /8 (.375) S37C-R /2 (.500) S50C-R Round Range Shape Min. Max. /G over-all-length, less E diameter (point size) EXAME: 6 50-R /8 (.375) S37-R E=.41 1/2 (.500) S50-R /8 (.625) S62-R /4 (.750) S75-R /8 (.625) S62E-R /4 (.750) S75E-R (1.000) S100E-R AGE B10 Inch Shoulder unch 9 of AI unch MN Nitride; wear resistant surface treatment, M2 only. N Titaniun Nitride (V); coating for added wear resistant, M2 only. See Section K for additional surface treatment types and applications.

10 Shoulder unch Blanks over-all-length available in 1/4 increments excluding 3.25 and 3.75 EXAME: 6 ES50-B 3.00 unch Blanks Shank ength Extended ead ead iameter Range ength ia. Thick T 3/16 (.1875) S18-B /4 (.2500) S25-B T /16 (.3125) S31-B /8 (.3750) S37-B /2 (.5000) S50-B /8 (.6250) S62-B /4 (.7500) S75-B (1.000) S100-B Ejector unch Blanks Shank ength ead ead Ejector oint iameter Range ia. Thick in ength T B (Max.) 3/16 (.1875) ES18-B E.75 1/4 (.2500) ES25-B E.75 T /16 (.3125) ES31-B E 1.00* 3/8 (.3750) ES37-B E /2 (.5000) ES50-B E /8 (.6250) ES62-B E 3/4 (.7500) ES75-B E 1 (1.000) ES100-B E 1.50 *.75 when = Inch Shoulder unch 10 of 11 AGE B AI unch

11 Quill unches over-all-length oint imension EXAME: 25 BQ available in 1/4 increments Bevel ead oint ength Range Range BQ o 1.8 (Ref.) R 10 iece Minimum Flat ead oint ength ead Range Range ia R FQ FQ FQ FQ FQ FQ FQ iece Minimum AGE B12 Inch Shoulder unch 11 of AI unch