Stndrd Produts BRACKETS CONNECTORS ELBOWS FLANGES SPHERES / HEMISPHERES / POST & END CAPS SLIP-ON FITTINGS BIKE RACKS MISCELLANEOUS PRODUCTS
Formed Wll Mount Brkets Formed Wll Mount Brket Aville in Steel, Aluminum, Stinless Steel ( /6" thik) nd Bronze. One, two or three hole mounting options. Snp-On Covers pge re used with these Brkets to over the mounting hrdwre. 2 /2" 2 /2" /8" Bolt Cler Holes for Srews " Formed Wll Mount Brket Round Sddle with One Hole " Mde in MILWAUKEE BRS90R ZINC PLATED GALVANIZED ANODIZED 90R 90R.PL G90R 9R 9R.AN TYPE 04 TYPE 6 BRASS 9R 9R.6 BRS90R 02 006 00 Type 04 BRASS C26000 Finish: Steel nd Aluminum Brkets re unfinished. Bronze nd Stinless Steel Brkets re supplied with stin finish. Bright polished, nodized, plted nd glvnized finishes re ville on speil order. 2 /2" 2 /2" /8" Bolt Cler Holes for Srews " Formed Wll Mount Brket Flt Sddle with One Hole " 9F 90F 9F 9F Cler Holes for Bolts Formed Wll Mount Brket Round Sddle with Two Holes 92R 9R 9R Cler Holes for Bolts Formed Wll Mount Brket Flt Sddle with Two Holes 92F 9F 9F Cler Holes for Bolts Cler Holes for Bolts 9R Formed Wll Mount Brket Round Sddle with Three Holes 96R 9R Formed Wll Mount Brket Flt Sddle with Three Holes 96F 9F 9F Note: Imges shown re typil tul prts my vry slightly. View our drwing files t shopwgner.om for tul dimensions. Plese review our qulity expettions sttement on Pge 22. NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 6 ISO 900:2008 F 44 24 040 P 44 24 0444 T 888 24 694
Formed Wll Mount Brkets Formed Brket Universl Sddle, Center Line Universl Sddle Fits Round nd Flt Mterils. Dimensioned to Meet NFPA, ICC, ANSI A. nd 200 ADA. " /2" /8" /8" Bolt Cler Holes for Srews " Cler Holes for Bolts Cler Holes for Bolts ZINC PLATED WITH HOLE WITH HOLE WITH 2 HOLES WITH HOLES WITH HOLE WITH 2 HOLES WITH HOLES WITH HOLE WITH 2 HOLES WITH HOLES 929 929.PL 929-2 929-9 9-2 9-92 92-2 92-929 STANDARD PRODUCTS Formed Brket Round Sddle, " Center Line " 2 /6" Cler Holes for Srews " RAILING SYSTEMS /8" Bolt " 2 /6" /8" Bolt Cler Holes for Srews " " " Cler Holes for Bolts Cler Holes for Bolts Cler Holes for Bolts WITH HOLE WITH 2 HOLES WITH HOLES WITH HOLE WITH 2 HOLES WITH HOLES WITH HOLE WITH 2 HOLES WITH HOLES 98R 940R 944R 99R 94R 94R 99R 99R-2 99R- Formed Brket Flt Sddle, " Center Line Cler Holes for Bolts WITH HOLE WITH 2 HOLES WITH HOLES WITH HOLE WITH 2 HOLES WITH HOLES WITH HOLE WITH 2 HOLES WITH HOLES 98F 940F 944F 99F 94F 94F 99F 99F-2 99F- 99R 99F TRADITIONAL RAILING CUSTOM SERVICES Snp-On Cover For oneled mounting of single hole Formed Brkets shown on pges 6 nd. Two nd Three Hole Brkets must e ountersunk to use these overs. BRASS 960 96 962 96 Style B Filler Use Filler to prevent over tightening of mthing hndril Brket whih my result in rking the drywll. / 4-20 /2" Round Hed Srews inluded. h /8" 49 /8" 49B 2 /8" h Threded Holes for /4-20 Srews (Inluded) /8" Bolt APPENDIX Not ll produts will meet ll ode requirements. Alwys onfirm your lol requirements, produt dimensions nd struturl dt prior to speifying. shopwgner.om
Style B /6" Formed Wll Mount Brkets Style B Brket /6" Formed A Wgner Originl Universl Sddle for use with flt or round setions. 2 /8" /8" Bolt Cler Holes for Srews " 2 42 006 00 Type 04 BRASS C26000 BRONZE C28000 (Muntz Metl) Finish: Steel Brkets re unfinished. Bronze nd Stinless Steel Brkets re supplied with stin finish. Bright polished, nodized, plted nd glvnized finishes re ville on speil order. Style B Brket with One Hole GALVANIZED MUNTZ 2 /2" 48 G48 422 42 2 /2" 48-NSH* " 426 G426 40 4 " 426-NSH* *NSH denotes No Sddle Holes. Cler Holes for Bolts 44 Style B Brket with Two Holes 2 /2" 44 48 " 442 446 Cler Holes for Bolts 48 Style B Brket with Three Holes 2 /2" 48 462 " 466 40 Redesigned Style B Brket The originl Wgner Style B Formed Hndril Brket hs een redesigned to djust the vertil lerne from the underside of the Hndril to the horizontl rm of the Brket. This Style B Formed Hndril Brket offers /2" horizontl nd vertil lerne to meet ode requirements nd the reommendtions of the 200 ADA Stndrds for Aessile Design (ADASAD). 2 /2" " /2" 9 /6 " Cler Holes for Srews Redesigned Style B Brket with One Hole GALVANIZED MUNTZ 2 /2" 49 G49 420 42 2 /2" 49-NSH 420-NSH *NSH denotes No Sddle Holes. /8" Bolt 2 49 Note: Imges shown re typil tul prts my vry slightly. View our drwing files t shopwgner.om for tul dimensions. Plese review our qulity expettions sttement on pge 22. NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 8 ISO 900:2008 F 44 24 040 P 44 24 0444 T 888 24 694
Style C Brket /6" Formed For flt wlls or tth to Pipe nd Round Tue Posts with Style H Adpter. Squre nd Retngulr Tue Posts. Limited mounting spe. Universl Sddle for use with flt or round setions. Style C Brket with One Hole Use Style H Adpter to mount to Round Posts. Cler Holes for Srews /8" Bolt Cler Holes for Srews Cler Holes for Bolts /8" /8" /8" /8" 2 /6 " ZINC PLATED 2 /6 " GALVANIZED 2 /2" 44 48 " 482 PL482 G482 486 Style C Brket with Two Holes 2 /2" 490 494 " 498 02 Style H Adpter Adpts Style C Brket for use with Pipe or Tue. 486 490 Formed Extruded Style Brket Round Sddle /2" 2 Cler Holes for Srews /8" Bolt /8" Bolt 2" " " THICK /6" THICK 2 2 /8" 90R 990R 2 /2" " 98R 998R Formed Extruded Style Brket Flt Sddle " Cler Holes for Srews /8" Bolt Formed Wll Mount Brkets THICK /6" THICK 2 /8" 2 /8" 90F 990F 2 /8" " 98F 998F /2" Mde in MILWAUKEE 90F Universl Weld Brket Lod dt is ville for these Brkets upon request. 980ST 90R 980SS CUSTOM SERVICES TRADITIONAL RAILING RAILING SYSTEMS STANDARD PRODUCTS OD Pipe Size Pipe OD ZINC PLATED.66" PL /2".90" 40 2" 2.8" 902 Not ll produts will meet ll ode requirements. Alwys onfirm your lol requirements, produt dimensions nd struturl dt prior to speifying. 980ST Style F Filler Use With One Hole Style C Brket. /8" dimeter with one ler hole for /8" Bolt. Use Filler to prevent over tightening of mthing Hndril Brket whih my result in rking the drywll. Depth /8" 4B /8" 4 980SS 4B APPENDIX shopwgner.om 9
Trditionl Cst Wll Mount Brkets Trditionl Cst Wll Mount Brkets /6" 2 /8" /8" MALLEABLE IRON Finish: Mllele Iron Brkets re unfinished. Glvnized finishes re ville on speil order. Note: These rkets re eing phsed out nd repled with ode omplint rkets shown on the next pge. r = C'sunk for Srew d Cst Wll Mount Brket Round Sddle with One Hole /8" /8" Bolt 2 6 d MALLEABLE IRON /2" 2 2 /2" /8" 6 2 " /8" 0 Cst Wll Mount Brket Round Sddle with Two Holes Cler Holes for Bolts d MALLEABLE IRON /2" 2 2 /2" /8" 2 " /8" 80 Cst Wll Mount Brket Round Sddle with Three Holes Cler Holes for Bolts - d MALLEABLE IRON /2" 2 2 /2" /8" - 2 " /8" 80- " C'sunk for Srew 2 /2" /2" Cst Wll Mount Brket Flt Sddle with One Hole d 86 d MALLEABLE IRON /2" 2 /6" 2 /2" 4 /6" 86 /2" 2 /6" " 4 /6" 9 /8" /8" Bolt 2 NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 0 ISO 900:2008 F 44 24 040 P 44 24 0444 T 888 24 694
Code Complint Trditionl Cst Wll Mount Brkets ADA nd Code Complint Cst Wll Mount Hndril Brkets MALLEABLE IRON Type 04, ASTM A Alloy B8.2 ASTM B 26 BRONZE C8600 Finish: Mllele Iron Brkets re unfinished. Aluminum, Bronze nd Stinless Steel Brkets re supplied with stin finish. Aluminum stin ler nodized finish is AA-M2-C22-A. A right polished finish is ville on speil order. Round Sddle with One Hole MALLEABLE IRON Flt Sddle* with One Hole ANODIZED BRONZE /2" 2 /6" 2 /2" 66 80 80AN 8 8 /2" 2 /6" 806 806AN 86 84 ANODIZED BRONZE /2" 2 /6" 2 /2" 80F 80FAN 8F 8F /2" 2 /6" 806F 806FAN 86F 84F 80 Round Sddle 80F Flt Sddle /8" Bolt C'sunk for Srew 2 /2" 2 RAILING SYSTEMS STANDARD PRODUCTS Round Sddle with Two Holes MALLEABLE IRON ANODIZED /2" 2 /6" 2 /2" 66-2 80-2 80-2AN 8-2 /2" 2 /6" -2 806-2 806-2AN 86-2 Flt Sddle* with Two Holes /2" 2 /6" 2 /2" 80F-2 8F-2 /2" 2 /6" 806F-2 86F-2 Round Sddle with Three Holes MALLEABLE IRON ANODIZED /2" 2 /6" 2 /2" 66-80- 80-AN 8- /2" 2 /6" - 806-806-AN 86-80-2 Round Sddle 80- Round Sddle 80F-2 Flt Sddle Cler Holes for Bolts CUSTOM SERVICES TRADITIONAL RAILING Flt Sddle* with Three Holes /2" 2 /6" 2 /2" 80F- 8F- /2" 2 /6" 806F- 86F- 80F- Flt Sddle Cler Holes for Bolts APPENDIX * Aluminum, Bronze, nd Stinless Steel Flt Sddle Brkets re produed y grinding Round Sddle Brket of mthing dimensions. Note: Porosity is norml ttriute of st produts. Every effort is mde to minimize the pperne of porosity. However, minor pitting nnot e voided nd is to e expeted. Not ll produts will meet ll ode requirements. Alwys onfirm your lol requirements, produt dimensions nd struturl dt prior to speifying. shopwgner.om
Cst Wll Mount Hndril Brkets Style D Cst Hndril Brket These Brkets hve een newly designed to meet the requirements for vertil lerne etween the underside of the Hndril nd the Brket rm of /2". 49 492 496 DUCTILE/MALLEABLE IRON ASTM A 4 Type 04, ASTM A Alloy B.2 ASTM B 26 BRONZE C8600 BRASS Yellow Brss, C2000 Finish: Dutile nd Mllele Iron Brkets re unfinished. Aluminum, Bronze nd Stinless Steel Brkets re supplied with stin finish. Stin ler nodized finish is AA M2 C22 A2. Bright polished, nodized, plted nd glvnized finishes re ville on speil order. " 2 /2" /6" /2" Universl Sddle Fits Round nd Flt Mterils with One / 8-6 Tpped Hole Sddle Holes Are Cler For Srews. /8-6 Tpped Hole /8" MALLEABLE IRON ANODIZED BRONZE 2 /2" 49 492 492AN 496 48 482 482AN 486 /6" /2" " 2 /8" Universl Sddle Fits Round nd Flt Mterils with Three Holes Cler for Srews Sddle Holes Are Cler For Srews. /8" 492- MALLEABLE IRON ANODIZED BRONZE 2 /2" 49-492- 492AN- 48-482- 482AN- 486- /8" Cst Wll Brket for Tue Sddle fits.0" or 2.00" OD Stinless nd Brss Tue. 2 /2" 2 /8" Countersunk Holes 4 POLISHED POLISHED BRASS Tue OD.0" 2 /2" 4.4 4.0" 2 /8" 44 2.00" 2 204.4 204 2.00" 2 /8" 4204 /8" /6" Cst Wll Brket for Tue Sddle fits.0" or 2.00" OD Brss Tue. Supplied with polished finish. /6" Hnger Bolt is inluded. /6" Tpped Hole 2 /2" 4 Tue OD POLISHED BRASS.0" 2 /2" 4 2.00" 2 420 Note: Porosity is norml ttriute of st produts. Every effort is mde to minimize the pperne of porosity, ut minor pitting n not e voided nd is to e expeted. NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 2 ISO 900:2008 F 44 24 040 P 44 24 0444 T 888 24 694
Cst Wll Mount Hndril Brkets Style U Cst Brket with Universl Sddle " 2" /2" /8" 2 2 Countersunk for Srews 0 Universl Sddle Fits Round nd Flt Mterils with One / 8-6 Tpped Hole DUCTILE IRON Stin Aluminum ANODIZED Stin Anodized Aluminum 2 /2" 0-2 -2-2AN 29-2 " 0 AN 29 Typil Filler Use /8-6 Tpped Hole STANDARD PRODUCTS Universl Sddle Fits Round nd Flt Mterils with Two Holes DUCTILE IRON ANODIZED 2 /2" 0-2 -2-2AN -2 " 0 AN Cler Holes for Bolts Typil Anhor Plte Use 0 RAILING SYSTEMS Universl Sddle Fits Round nd Flt Mterils with Three Holes 2 /8" h DUCTILE IRON Threded Holes for /4-20 Srews (Inluded) /8" Bolt ANODIZED 2 /2" 0-2 9-2 9-2AN -2 " 0 9 9AN Brket Wll Filler These optionl Fillers prevent over tightening of mthing Hndril Brkets whih my result in rking the plster or drywll. Use plted Steel Fillers with Aluminum nd Bronze Brkets ll for vilility or emil rfq@milwgner.om. Style B Filler Aville with one ler enter hole for /8" Bolt or three tpped ler holes for Bolts. These Fillers re used with Style D Cst Hndril Brkets. / 4-20 /2" Round Hed Srews inluded. h /8" 49 /8" 49B /6" Cler Holes for Bolts /4-20 Tpped Hole Anhor Plte For use with Style U Brkets only. Six tpped holes nd /6" enter hole with Round Hed Bolts. Center Hole /6" B46 Filler For use with one hole or three hole Style U Brkets only. 2 Filler hs one /6" dimeter /6" enter hole, nd three untpped holes. For use with /8" drywll. 22 Filler hs one /6" dimeter enter hole, nd three tpped holes with mthing /8" Round Hed Srews. For use with /8" /8" drywll. Use Filler to prevent over tightening of mthing Hndril Brket whih my result in rking the drywll. Center Hole For Use In /6" 2 Plster /6" 22 Drywll 0 TRADITIONAL RAILING CUSTOM SERVICES APPENDIX shopwgner.om
Extruded Wll Mount Hndril Brkets Extruded Hndril Brkets 2" 2" /2" Holes for #0 FHMS 2 /8" /2" Holes for #0 FHMS 2 /8" 2 /8" /6" /8" Bolt /8" 2 /2" /6" /8" Bolt " ER804 Extruded Hndril Brket, Squre Bse BURNISHED* ANODIZED 2 /2" ER80 ER80A ER800 ER800A Extruded Hndril Brket, Round Bse BURNISHED* 2 /2" ER804 ER8004 * A Burnished Finish is tumled, ut not polished. This removes urrs nd retes "mtte" finish..90".66" BER80 Long Length Shpe The Extruded Hndril Brket shown ove is lso ville in ' lengths without holes. Use to rete Brkets for your speifi requirements. Also ville in lengths up to 0' requires shipment y truk. l/ft length 2 /2" 2.0 ' BER80 2.0 ' BER800 2 /2" /2" /8" Bolt 2 /8" " Extruded Wll Mount Slip-Fit Brket ER8004SF 2 /2" ER804SF ER8004SF BUILDING CODE ISSUES Chek with your lol ode uthorities prior to speifying ny riling system. The following re the most ommon requirements in ommeril nd residentil pplitions: Hndril is required on stirs nd rmps. Height: 4 to 8 inhes ove stir nosings nd rmp surfes. Lod Requirements: 0 ls/ft uniform lod or 200 ls. onentrted lod Clerne: Between wll nd Hndril: /2" minimum Exeptions: NFPA 0: 2 minimum 99 ADAAG: /2" etween the wll nd Hndril (Updted to /2" minimum for 200 ADASAD) Between underside of Hndril nd horizontl Brket Arm: /2" minimum Exeptions: For eh /2" of dditionl Hndril perimeter dimension ove, the vertil lerne dimension of /2" shll e redued y /8". Sutrt From Underside of Riling Clerne From Underside of Riling Riling Dimeter Perimeter.2".92" 0 /2".0" 4." - /8" /8".66".2" -.90".9" - /2" " 2.00" 6.28" - /2" " Refer to Pge 229 for other ode relted informtion. While the 99 ADAAG stted tht the distne etween the wll nd Hndril hd to e /2", ll susequently pulished model odes inluding the 200 ADASAD now stte this to e minimum requirement. Be wre however tht NFPA 0 notes minimum wll lerne of 2 etween the wll nd Hndril. Alwys onfirm requirements with the lol uthority hving jurisdition prior to speifying ny Riling produts. Not ll Brkets will meet ll ode requirements. Confirm your lol requirements nd the Brket dimensions prior to speifying. NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 4 ISO 900:2008 F 44 24 040 P 44 24 0444 T 888 24 694
Wll Mount Hndril Brkets Wll Mount Hndril Brket Rottes To Any Angle. Single Tpped / 8-6 Hole. Brkets re shipped s kits nd re not ssemled. /8" /8" /8" 2 /6" /4 " " BRASS 2 /8" MB22W MB42W 2 /8" MB20W MB40W Set Srew 2 /6" /4 " " 2 /6" /4 " " 2 /8" MB2W 2 /8" MB0W BRASS 2 /8" MB222W MB422W /2" MB202W MB402W " to /8" Tpped Hole /8" Di. Set Srew Set Srew 2 /6" /4 " " Wll Mount Hndril Brket Brket Arm is provided to llow " to to enter of Hndril. Cut s needed for shorter enterline projetions. Rottes To Any Angle. Single Tpped / 8-6 Hole. BRASS GB480 GB482 GB484 Set Srew 2 /6" /4 ".90" Wll Mount Brket With Vertil nd Horizontl Adjustment. GB482 WR900W 2 /8" to /2" /2" to 2" WR900W View Slip-Fit Brkets on Pge 2 CUSTOM SERVICES TRADITIONAL RAILING RAILING SYSTEMS STANDARD PRODUCTS /8" 2 /6" /4 " APPENDIX Set Srew " 2 MB20W /2" MB00W shopwgner.om
Wll Mount Hndril Brkets Assemled Br Brkets These Brkets re ssemled from the Components shown on pge. Provided with three ountersunk holes for Srews. Custom designs re lso ville to meet your speifi requirements. Contt Wgner with your requirements. 2 /6" /4 " 2 /6" /4 ".8" 2.40".8" 2.40" RB02.4 Wll Mount Hndril Brket MILL FINISH BRASS 2 /2" RB402 RB02.4 RB602.4 RB400 RB00.4 RB600.4 " RB42.4 Wll Mount Hndril Brket MILL FINISH /8" Tpped Hole " BRASS 2 /2" RB42 RB242 RB42.4 RB442.4 RB40 RB240 RB40.4 RB440.4 Note: Steel nd Stinless Sddles re welded in ple. Brss Sddle is srewed in ple. 2 /6" /4 " /8" Building Code Issues LU20 Inner Sleeve /4 " Snp-On Cover Flnge Wll Mount Brket Stin ler nodized finish is AA M2 C22 A2. " Mount to Wll Using /8" Bolt (y Others) ANODIZED LU20 LU20.AN LU206 VA0W Chek with your lol ode uthorities prior to speifying ny riling system. The following re the most ommon requirements in ommeril nd residentil pplitions: Hndril is required on stirs nd rmps. Height: 4 to 8 inhes ove stir nosings nd rmp surfes. Lod Requirements: 0 ls/ft uniform lod or 200 ls. onentrted lod Clerne: Between wll nd Hndril: /2" minimum Exeptions: NFPA 0: 2 minimum 99 ADAAG: /2" etween the wll nd Hndril (Updted to /2" minimum for 200 ADASAD) Between underside of Hndril nd horizontl Brket Arm: /2" minimum Exeptions: For eh /2" of dditionl Hndril perimeter dimension ove, the vertil lerne dimension of /2" shll e redued y /8". Mount Outer Sleeve To Vertil Riling Set Srew Riling Vertil Mount Stnd-Off Useful for elevtor pplitions. Adpters sold seprtely. Also ville without Wll Flnge see pge 9. Stin finish. BRASS VA0W VS0W VB0W Sutrt From Underside of Riling Clerne From Underside of Riling Riling Dimeter Perimeter.2".92" 0 /2".0" 4." - /8" /8".66".2" -.90".9" - /2" " 2.00" 6.28" - /2" " Refer to pge 229 for other ode relted informtion. NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 6 ISO 900:2008 F 44 24 040 P 44 24 0444 T 888 24 694
Hndril Brket Components Br Brket Components These omponents provide the prts neessry to frite Brkets for your unique requirements. Weld the Brket Arm diretly to your Post or tth to Brket Bse to mke Wll Mount Hndril Brket. Trim the Brket Arm s needed to mth your projetion requirements. When longer Brket Arms re lled for, Wgner n mnufture Br Bends speifi for your jo. Be wre tht longer Brket Arms will inrese stress t the wll onnetion. Reduing Brket sping will strengthen the ril in suh ses. Consult with struturl engineer in extreme situtions. Contt rfq@milwgner.om. Mde in MILWAUKEE Snp-On Cover Bse or Brket Bse Brket Sddle Brket Arm Snp-On Cover Flnge STANDARD PRODUCTS Brket Arm Inside Rdius = Br Dimeter.0". Ends Untrimmed, No Holes; " Legs. Mill Finish. Contt Wgner for finish nd hole options. Br Dimeter 606 04 C6000 BRASS C800 BRONZE /2" R0 R240 R20 R0 R20 /8" R40 R20 R0 R60 R220 R0 R260 R80 R90 R20 Brket Bse " Dimeter Thik. With or Without Holes. Mill Finish. Contt Wgner for finish nd other hole onfigurtion options. 02 04 Snp-On Cover Flnge Bse.80" Thik.." Dimeter. Three holes Cler For Bolts. Refer to pge 9 For Additionl Sizes. Center Hole 0 04 /2" 202B 2022B 202B /8" 20B 202B 20B 204B 2042B 204B Snp-On Cover Flnge Mill Finish. Contt Wgner for Other Options. 8 G. Dimeter /2" High Refer to pge 9 for Additionl Sizes. D4C6 C26000 BRASS R60 C28000 BRONZE Hole Size No Hole D4 D44 D4 D46 D46M /2" D4C D44C D4C D46C D46MC /8" D4C6 D44C6 D4C6 D46C6 D46MC6 D4C D44C D4C D46C 202 Hole 0 04 /2" 202 2022 202 /8" 20 202 20 204 2042 204 Brket Sddle 2 /2" Long " Wide 2 Guge. With Two Holes Cler for Srews. One /8" Center Hole. For.0" to 2.00" Dimeter Mteril. Mill finish exept s noted Round Sddle 606 04 04 6 C6000 C800 BRASS BRONZE S0 S02 S0 S0.4 S0.6 S04 S0 Flt Sddle 606 04 C6000 C800 BRASS BRONZE S0F S02F S0F S04F S0F Glss Mount Adpter Kits Most of the Glss Mount Brkets shown on pge 20 nd 2 use these Glss Mount Adpter Kits. Aluminum nd Brss Brkets use Disk with ountersunk hole nd Bolt. Stinless Steel Brkets use Disk with Welded Stud. Kit ontining Disk with ountersunk hole, 2 Gskets, Sper nd Bolt. Glss Thikness Disk Dimeter * BRONZE /2".00" GB48K GB48K.00" GB48K. /2".90" GB486K /2".2" GB2000K GB4000K.2" GB4000K. * Note: A Stinless Steel Bolt is provided with the Aluminum kit. Kit ontins Disk with Welded Stud, 2 Gskets, nd Sper. Glss Thikness Disk Dimeter /2".00" GB48K.00" GB48K. /2".90" GB48K.90" GB48K. /2".2" GB000K.2" GB000K. S02 APPENDIX CUSTOM SERVICES TRADITIONAL RAILING RAILING SYSTEMS shopwgner.om
/8" Post Mount Hndril Brkets Post Mount Hndril Brkets Squre or Retngulr Posts. Pipe nd Round Tue Posts using Adpters (pge 24) purhse seprtely. Rotte to ny ngle. Single tpped /8-6 hole. Brkets re shipped s kits nd re not ssemled. 2 /6" /4 " ¼" Bolt ¼" Set Srew Set Srew 2 /6" Post Mount Brket With Vertil nd Horizontl Adjustment. Ptent No.,8,89 Use AS90 Adpter for use with /2" Pipe Post see pge 24. 2 /8" to /2" to 2" WR900P ¾" ½ /4 " /8" BRASS 2 /8" MB22P MB42P 2 /8" MB20P MB40P 2 /6" /4 " 44 Style C Brket /6" Formed Use Style H Adpter to Mount to Round Posts. See Aove. 2 /2" 44 " 482 Holes /8" Bolt /8" /8" 2 /6" 2 /2" MB2P MB0P Style H Adpter Adpts Style C Brket for use with Pipe or Tue. 2 /6 " Pipe Size Pipe OD.66" /2".90" 40 2" 2.8" 902 OD /8" 2 /2" 9 /6 " Set Srew /4 " BRASS 2 /8" MB222P MB422P MB202P MB402P C sunk for Srews Cp Srew Threded Rivet (provided) 2" 2 /2" /8" 2 /6" /4 " Set Srew 2 /2" MB20P MB00P Cst Post Brket Mounts to Post with Cp Srew nd Threded Rivet whih re provided. Rottes to ny ngle. Provides for /2" lerne etween Hndril nd post s required y ADA nd uilding odes. CLEAR ANODIZED TUMBLED MILL FINISH 2 /2" IR8KA IR8KM-8 NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 8 ISO 900:2008 F 44 24 040 P 44 24 0444 T 888 24 694
Post Mount Hndril Brkets Adjustle Post Mount Brket For use with Stinless Steel Posts. Sddle djusts to stir or rmp ngle s needed. Adjustle Brket 0 to 6 degree rnge. Pipe Size Dimeter Shedule Wll.2".0".20" LU29.".66" 40.40" LU28.60" /2".90" 40. LU2 Adjustle Post Mount Brket For use with Stinless Steel Posts. Vertil nd ngle re oth djustle. 0 to 6 degree rnge. /8" 2 /8" 9 /6 " 2." LU2 Drill nd Tp Post for /4-20 Set Srew 2 /8" 9 /6 " STANDARD PRODUCTS Pipe Dimeter Sh. Wll.2".0".20" 2-4 /8" WR00AA.".66" 40.09 -.40" 2-4 /8" WR660AA.60" /2".90" 40.09 -. 2-4 /8" WR900AA Vertil Mount Hndril Brket Stnd-Off Useful for elevtor orridor riling pplitions. /2 " WR900AA Inner Sleeve Mount to Wll Using /8" Bolt (y Others) RAILING SYSTEMS BRASS VA0 VS0 VB0 Mount Outer Sleeve To Vertil Riling Set Srew Riling Squre & Retngulr Post Fittings These fittings permit the mounting of pipe rilings diretly to squre or retngulr post mteril. They re ville for olt on or weld pplitions. VA0 TRADITIONAL RAILING Weld Thik Metl Weld Type With Yoke Thik. Pipe Size WITH /2" HOLE WITH OUT HOLE /8" /8" 2 /8" 09 09NH CUSTOM SERVICES Newel Post Weld Thik Metl Weld Type Without Yoke Thik. APPENDIX Pipe Size WITH /2" HOLE WITH OUT HOLE /8" /8" 2 /8" 020 020NH Dimensions shown re for referene only. Downlod imge file t shopwgner.om to onfirm dimensions prior to speifying. shopwgner.om 9
Glss Mount Hndril Brkets Glss Mount Brkets In stirwy, gurd pplition 42" high odes will generlly require tht Hndril e provided t height etween nd 8". With Glss Riling systems refer to pge 02 Glss Brkets permit tthment of diretly to or etween tempered glss struturl lustrdes. Provide hole for /2" glss; /6" hole for glss. Refer to tle on pge 22 for minimum hole requirements. Hole Spes for Glss If hole is to e drilled in the glss, it must e done prior to tempering. Attempts to drill holes or grind the glss fter tempering will most likely use rekge. For dditionl informtion, see pge 22. Note: Stinless Steel rkets use disk with welded stud. Aluminum nd rss rkets use disk with ountersunk hole nd olt. See photos on pge. Brkets re shipped s kits nd re not ssemled. 2 /6" /4 " 2 /6" /4 " /8" /8" OD Nylon Sper " /8" OD Nylon Sper 2 /6" /4 " 2 /6" /4 " /8" /8" Set Srew Set Srew /8" OD Nylon Sper " /8" OD Nylon Sper " " to 2 /6" /4 " 2 to " 2 /6" /4 " /8" /8" /8" " glss BRASS 2 /8" /2" - GB22 GB42 2 /8" /2" - GB20 GB40 glss 2 /8" /2" - GB2 2 /8" /2" - GB0 GB20 glss BRASS 2 /8" /2" - GB222 GB422 /2" /2" - GB202 GB402 2 GB20 /2" GB00 Di. Set Srew /8" OD Nylon Sper " GB48 Di. Set Srew /8" OD Nylon Sper.8" GB486 Brket rm is provided to llow " to to enter of Hndril. Cut s needed for shorter enterline projetions. glss BRASS /2" GB48 GB48 GB48 GB4 GB4 GB4 Brket rm is provided to llow 2 to " to enter of Hndril. Cut s needed for shorter enterline projetions. glss BRASS /2" GB486 GB48 GB488 GB46 GB4 GB48 NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 20 ISO 900:2008 F 44 24 040 P 44 24 0444 T 888 24 694
/8" Glss Mount Hndril Brkets 2 /6" /4 " 2 /6" /4 " /8" /8" OD Nylon Sper /4 " glss BRASS 2 /8" /2" GB22 GB42 2 /8" /2" - GB20 GB40 2 /8" GB229 GB429 /8" OD Nylon Sper /4 " glss 2 /8" /2" GB2 2 /8" /2" - GB0 2 /8" GB29 STANDARD PRODUCTS 2 /6 " /4 " 2 /6" /4 " /8" Set Srew /8" OD Nylon Sper /4 " glss BRASS 2 /8" /2" - GB224 GB424 /2" - GB204 GB404 Set Srew /8" OD Nylon Sper Set Srew 2 /6" /4 ".90" Glss Mount Brket With Vertil nd Horizontl Adjustment. For use with /2" or glss. 2 /8" to /2" /2" to 2" GR900 2 /6" /4 " /8" Set Srew /8" OD Nylon Sper 2 2 /2" 2 /2" 2 /4 " GB20 glss 2 /2" /2" GB20 /2" GB0 2 /2" GB2 GB 99 Glss Mount Hndril Brket No struturl test dt is ville for these Brkets. This Brket uses ountersunk Srew. Tue OD POLISHED.0" 99 2.00" 99-2 RAILING SYSTEMS TRADITIONAL RAILING CUSTOM SERVICES.8" 2.40" /8" Tpped Hole /8" OD Nylon Sper Glss Mount Hndril Brket Note: Stinless Sddles re welded in ple. Brss nd Aluminum Sddles re srewed in ple. BRASS 2 /8" GB42.4 GB442.4 /2" GB40.4 GB440.4 " GB42.4 Not ll produts will meet ll ode requirements. Alwys onfirm your lol requirements, produt dimensions nd struturl dt prior to speifying. APPENDIX shopwgner.om 2
Wgner Slip-Fit Wll Mount Hndril Brkets.90" Mde in MILWAUKEE US Pt. 866 S teel 006 00, Zin Plted. S tinless Steel Type 04, Stin Finish. Aluminum 606, Mill Finish. For use with Shedule, 0 or 40 Pipe (.66" OD with.062" to.40" wll thikness). 2/2" 2/8" /2".66" /8" Bolt " Slip-Fit Brkets ER8004SF Extruded Wll Mount Slip-Fit Brket.90".90".90" ER804SF ER8004SF 2/2" /8" /2" /8" /2" 2 /2" 2/2" " /8" Bolt " 92SF /8" Bolt /8" Bolt " 9RSF " Formed Wll Mount Slip-Fit Brket Dimensioned to Meet NFPA, ICC, ANSI A. nd 200 ADA. ZINC PLATED ZINC PLATED 929SF.PL.90" Formed Wll Mount Slip-Fit Brket 92SF 9RSF Slip-Fit Brkets 90RSF.PL 2. I NSERT PIPE into eh side of Brket rrel.. T IGHTEN SCREWS lternting etween Srews until oth re tight. Repet for other Brkets. 2/2" No Welding No Unsightly Gpping t Butt Joints " Quik nd Esy to Instll. LOOSEN SCREWS until there is enough room etween strip lmp nd rrel to insert Pipe. Mde in MILWAUKEE 2/2" / " I finished 6 ofbolt the rooms " in two dys, totl of hours x men. My originl estimte ws 0 dys x men. 8 Whoever designed Slip-Fit is deserving of promotion. Leon Burgess, Preision Metls Jo: University of Florid, Ginesville, FL Frited nd Instlled y Preision Metls, In., Alhu, FL NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 22 ISO 900:2008 F 44 24 040 P 44 24 0444 T 888 24 694
Wgner Slip-Fit Hndril Brkets Slip-Fit Hndril Brkets US Pt. 866.90".66" /4 " Bolt Set Srew Set Srew Clmp Srew Post Mount Slip-Fit Brket With Vertil nd Horizontl Adjustment. Use with.66" OD Hndril only with wll thikness etween.09" to.40". Use AS90 Adpter for use with /2" Pipe Post see pge 24. /2" to 2" 2 /8" to WR66SFP /2".66" /8" Tpped Hole.90" Set Srew Set Srew Clmp Srew.90" Wll Mount Slip-Fit Brket With Vertil nd Horizontl Adjustment. Use with.66" OD Hndril only with wll thikness etween.09" to.40". /2" to 2" 2 /8" to WR66SFW.66" STANDARD PRODUCTS RAILING SYSTEMS.90" Set Srew Set Srew /8" Nylon Sper Clmp Srew.90" Glss Mount Slip-Fit Brket With Vertil nd Horizontl Adjustment. Use with.66" OD Hndril only with wll thikness etween.09" to.40". For use with /2" or glss. /2" to 2" 2 /8" to GR66SF Quik Assemly No Welding.66".90" Post Top Slip-Fit Brket Use with.90" OD Posts With.09" to.40" Wll Thikness. Use with.66" OD Hndril only with wll thikness etween.09" to.40". 2 to 4 /8" WR909SFA Stinless Steel Pipe Type 04, Stin Finish Pipe Size Sh. OD t 6' LENGTH OD 8' LENGTH.66".09" P6.4-6 P6.4 0.66".09" P6604.4-6 P6604.4 40.66".40" P92.4-6 P92.4 t APPENDIX TRADITIONAL RAILING CUSTOM SERVICES Loosen Set Srew. Remove vertil rm nd rrel ssemly. Loosen Bolt to relese lmp. Insert Tue. Tighten Bolt to lok Hndril in ple. Ressemle Brket nd tighten Set Srew. shopwgner.om 2
Brket Wll Fillers nd Adpters Brket Wll Fillers These optionl Fillers re for plster wlls or wll ord. The fillers prevent over tightening of mthing Hndril Brkets whih my result in rking the drywll. Aville with one ler enter hole for /8" Bolt, or one enter hole nd three tpped ler holes for Bolts. These Fillers re used with Style B nd Formed Hndril Brkets shown on pges 4 -. Use Plted Steel Fillers with Aluminum nd Bronze Brkets. Cll for vilility. h /6" Cler Holes Typil Filler Use Style A Filler For use with one hole Brket. /6" 2 /8" /8" Bolt h /8" 2B /8" 2 Bolt not inluded. /8" Filler For use with one hole or three hole Style U Brkets only. 2 Filler hs one /6" dimeter enter hole, nd three untpped holes. For use with /8" drywll. 22 Filler hs one /6" dimeter enter hole, nd three tpped holes with mthing /8" Round Hed Srews. For use with /8" drywll. Center Hole ZINC PLATED FOR USE IN /6" 2 PL2 Plster /6" 22 PL22 Drywll 2 /8" h Threded Holes for /4-20 Srews (Inluded) /8" Bolt Style B Filler For use with three hole Brket. Inludes three /8" Round Hed Srews. h /8" 49B /8" 49 Bolt not inluded. Typil Anhor Plte Use /6" /4-20 Tpped Hole B46 Anhor Plte For use with Style U Brkets only. Six tpped holes nd /6" enter hole with Round Hed Bolts. Center Hole /6" B46 AA90 AA904 Adpter Permits the Vertil Mount nd Post Mount Brkets to e used with Pipe nd Tuing. Stin finish. Hole For OD BRASS /6".0" AA0 AS0 AB0 /6".66" AS60 /6".90" AA90 AS90 AB90 /6" 2.00" AA200 AS200 AB200 /6".90" /2" AS90 NUMBERS IN BOLD TYPE re typilly in stok. Other items my not e ville for immedite shipment or re mde-to-order requiring minimum quntity nd longer led time. Visit shopwgner.om for vilility. 24 ISO 900:2008 F 44 24 040 P 44 24 0444 T 888 24 694
Typil Hndril Brkets Atthment Typil Hndril Brket Atthments Due to struturl requirements for Hndril Brkets s noted elow proper tthment is ritil to ssure sfety. There re other methods of tthment. Chek with your Fstener supplier regrding Epoxy Anhors nd Anhors for hollow lok. In hollow wll pplitions, Hndril Brkets must e fstened to wood studs or pproprite loking must e provided for struturl tthment. Cst Brket with Tpped Hole Formed Brket with Three Holes Mhined Brket with Tpped Hole STANDARD PRODUCTS Hnger Bolt with Lg Srew Expnsion Shield Mhine Srews olted to Filler Hnger Bolt with Lg Srew Expnsion Shield Cst Brket with One Hole Extruded Brket with One Hole Cst Brket with Tpped Hole RAILING SYSTEMS Through Bolt with Bking Plte Lg Srew into wood stud or loking BUILDING CODE ISSUES Chek with your lol ode uthorities prior to speifying ny riling system. The following re the most ommon requirements in ommeril nd residentil pplitions: Hndril is required on stirs nd rmps. Height: 4 to 8 inhes ove stir nosings nd rmp surfes. Lod Requirements: 0 ls/ft uniform lod or 200 ls. onentrted lod Clerne: Between wll nd Hndril: /2" minimum Exeptions: NFPA 0: 2 minimum 99 ADAAG: /2" etween the wll nd Hndril (Updted to /2" minimum for 200 ADASAD) Between underside of Hndril nd horizontl Brket Arm: /2" minimum Exeptions: For eh /2" of dditionl Hndril perimeter dimension ove, the vertil lerne dimension of /2" shll e redued y /8". Sutrt From Underside of Riling Clerne From Underside of Riling Riling Dimeter Perimeter.2".92" 0 /2".0" 4." - /8" /8".66".2" -.90".9" - /2" " 2.00" 6.28" - /2" " Refer to pge 229 for other ode relted informtion. Typil Assemly nd Glss Detils Set Srew Button Hed Bolt Srew Sddle Cst Sddle Hnger Bolt into wood stud or loking Glss Set Srew Glss Srew Sddle Gsket Glss Gsket Gsket Stud Welded Bking Disk Nylon Sper Nylon Sper Nylon Sper Countersunk Bking Disk With Srew Stud Welded Bking Disk TRADITIONAL RAILING CUSTOM SERVICES APPENDIX shopwgner.om 2