MANUAL ROLLER SHADE MANUAL ROLLER SHADES SHADE SIZES & WEIGHTS: BRACKET PROJECTIONS:
|
|
- Meryl Owens
- 6 years ago
- Views:
Transcription
1 MNUL ROLLER SHDE MNUL ROLLER SHDES (R, R & G0) (R, R & G0) STNDRD OMPONENTS:. Fabric. Roller Tube Dimensions: R /" Diameter R /" Diameter R " Diameter G /" Diameter R " Diameter R with Spring ssist... " Diameter. " Sealed Pocket Hem ar. lutch. ead hain. ead hain Stops. ead hain onnector. Tension Device. End Plug. lutch racket vailable in R and R sizes. End Plug racket. dapter for R, R and G0 lutches & End Plugs. R lutch with Spring ssist OPTIONL OMPONENTS: Fabric overed ottom ar, Flat or Oval. Front Fascia "/". Fascia rackets vailable in R and R sizes. End aps "/" R lutch with Spring ssist " Fascia " h " Fascia " h FSI & RKET OLORS: Vanilla White ronze nodized lack (See page - for color chart.) " /" d " /" d " or " " or " SHDE SIZES & WEIGHTS: SHDE SHDE MXIMUM MODEL WIDTH DROP WEIGHT R " " " " lbs. R /" " " " lbs. G0 /" " " " 0 lbs. R/R with /" " " " 0 lbs. Spring ssist RKET PROJETIONS: R R R R G0 R/R Spring ssist HDarchitectural.com
2 OMPONENT DIMENSIONS Outside & Inside Mount MNUL ROLLER SHDES eiling Mount End Plug and racket with Retainer OMPONENT DIMENSIONS: RKET MODEL MODEL D E F G H I J K L R /" Projection.".".0"." 0."."."."."."."." " Projection.".0".0"." 0.".".".".".0"."." R /" Projection.".".0"." 0.".".".".0"."."." " Projection.".".0"." 0.".".".".0".0"."." G0* /" Projection.0".".".0" 0.".".0".0".".".0"." R/R WITH SPRING SSIST /" Projection.0".".".0" 0.".".0".0".".".0"." * Requires more chain length due to greater gear ratio 00.. HDarchitectural.com -
3 SINGLE SHDE MOUNTING MNUL ROLLER SHDES ( Deductions will be taken by manufacturer. Please order desired width.) Finished Shade with rackets Tube Diameter Tube & Fabric ontrol End Light Gap Idle End Light Gap SINGLE SHDE MOUNTING DIMENSIONS: MODEL ONTROL END LIGHT GP IDLE END LIGHT GP TUE DIMETER R."." /" R."." /" / " G0 / " / " /" / " / " " R/R with Spring ssist HDarchitectural.com
4 SIDE-Y-SIDE MOUNTING MNUL ROLLER SHDES LEFT ND RIGHT ES RIGHT ND LEFT ES LEFT ES SIDE-Y-SIDE GP DIMENSIONS: MODEL LEFT & RIGHT ES RIGHT & LEFT ES LEFT ES R /" /" /" /" " /" /" /" /" R /" /" /" /" /" /" G0 /" /" /" /" /" /" /" /" /" /" R/R with Spring ssist 00.. HDarchitectural.com -
5 MNUL NDED ROLLER SHDE MNUL ROLLER SHDES (R, R & G0) " (R, R & G0) STNDRD OMPONENTS:. Fabric. Roller Tube Dimensions: R /" Diameter R /" Diameter R " Diameter G /" Diameter R " Diameter R with Spring ssist... " Diameter. " Sealed Pocket Hem ar. lutch. ead hain. ead hain Stops. ead hain onnector. Tension Device. End Plug. lutch racket vailable in R and R sizes. End Plug racket. dapter for R, R and G0 lutches & End Plugs. R lutch with Spring ssist OPTIONL OMPONENTS: Fabric overed ottom ar, Flat or Oval. Front Fascia "/". Fascia rackets vailable in R and R sizes. End aps "/" R lutch with Spring ssist " Fascia " h " Fascia " h FSI & RKET OLORS: Vanilla White ronze nodized lack (See page - for color chart.) " /" d " /" d " or " " or " SHDE SIZES & WEIGHTS: SHDE SHDE MXIMUM MODEL WIDTH DROP WEIGHT R " " " " lbs. R /" " " " lbs. G0 /" " " " 0 lbs. R/R with /" " " " 0 lbs. Spring ssist RKET PROJETIONS: R R R R G0 R/R Spring ssist HDarchitectural.com
6 DUL MNUL ROLLER SHDES /" /" lack-out shade STNDRD OMPONENTS:. Fabric. " Roller Tube. " Sealed Pocket Hem ar. SL0 Galaxy lutch. ead hain. ead hain Stops. ead hain onnector. Tension Device. Standard Dual rackets. End Plug. dapter for R Galaxy lutch OPTIONL OMPONENTS:. Optional racket Fabric overed ottom ar, Flat or Oval MNUL ROLLER SHDES /" /" " /" /" Sheer shade SHDE SIZES & WEIGHTS: SHDE SHDE MXIMUM TUE MXIMUM MODEL WIDTH DROP WEIGHT SIZE ROLL-UP DIMETER* SL0 Galaxy " " " " lbs. "." * Roll-up diameter varies with the thickness of the fabric. ontact Hunter Douglas ontract if specific roll-up diameter information is required. NOTE: Recommended for inside mount applications only HDarchitectural.com -
7 DUL MNUL SHDES WITH FSI MNUL ROLLER SHDES /" "."." /"." "." POKET PROFILES: " SURFE POKET /" /" /" /" STNDRD OMPONENTS:. " Fascia. Double racket. lutch ssembly. Shade. End Plug. ord Tensioner. ead hain Loop. ead hain Stop. ead hain onnector. hain Guide. " Tube " " EILING POKET /" SHDE SIZES & WEIGHTS: FSI & RKET OLORS: Vanilla White ronze nodized lack (See page - for color chart.) OPTIONL OMPONENTS:. Fascia End Plate. lockout Side hannel. lockout ottom hannel. Mounting Hole Plugs Fabric overed ottom ar, Flat or Oval /" LOSURE MOUNT WITH LOSURE " SHDE SHDE MXIMUM TUE MXIMUM MODEL WIDTH DROP WEIGHT SIZE ROLL-UP DIMETER* R " " " " lbs. "." G Fabric < oz/sq. yd /" " " " lbs.."." * Roll-up diameter varies with the thickness of the fabric. ontact Hunter Douglas ontract if specific roll-up diameter information is required HDarchitectural.com
8 MNUL SHDE WITH LOKOUT SYSTEM a " Fascia " h " Fascia " h b " /" d " /" d /" " /" d " /" d " Fascia " h " Fascia " h " or " " or " STNDRD OMPONENTS:. Fabric. Roller Tube Dimensions: R /" Diameter R.... /" Diameter R " Diameter G0.... /" Diameter R " Diameter. " Sealed Pocket Hem ar. lutch. ead hain. ead hain Stops. ead hain onnector. Tension Device. End Plug. " / " Fascia rackets R /" Diameter R.... /" Diameter a. Top/ack Fascia (OM) " Dimensions: " h x /" d " Dimensions: " h x /" d b. Top/ack Fascia (IM) " Dimensions: /" h x " d " Dimensions: /" h x " d. Front Fascia " Dimensions: " h x /" d " Dimensions: " h x /" d. Side hannels Dimensions: /" w x /" d. ottom hannel Dimensions: /" h x /" d. Wool Pile. Mounting Hole Plugs (outside mount only) MNUL ROLLER SHDES OPTIONL OMPONENTS:. End aps "/" /" Inside Mount Fabric overed ottom ar, Flat FSI & RKET OLORS: Vanilla White ronze nodized lack (See page - for color chart.) SHDE SIZES & WEIGHTS: /" /" Outside Mount SHDE SHDE MXIMUM TUE SIZE TUE SIZE MXIMUM ROLL-UP DIMETER* MODEL WIDTH DROP WEIGHT " FSI " FSI " FSI " FSI R " " " " lbs. /" /" R /" 0" " " lbs. /" /" /" /" R 0 /" " " " lbs. " /" G0 /" " " " 0 lbs. /" /" R /" " " " lbs. " /" R /" " " " 0 lbs. " /" with Spring ssist * Roll-up diameter varies with the thickness of the fabric and tube diameter. ontact Hunter Douglas ontract if specific roll-up diameter information is required. with Spring ssist 00.. HDarchitectural.com -
9 MNUL SHDE WITH EXTRUDED POKET MNUL ROLLER SHDES STNDRD OMPONENTS:. Fabric. " Roller Tube. " Sealed Pocket Hem ar. lutch. ead hain. ead hain Stops. ead hain onnector. Tension Device. End Plug. lutch racket. End Plug racket. Extruded Pocket. Pocket ottom losure. Pocket End Plate POKET PROFILES:." or " SURFE POKET." or " OPTIONL OMPONENTS: Fabric overed ottom ar Flat or Oval EXTRUDED POKET OLORS: White nodized (See page - for color chart.) EILING POKET POKET DIMENSIONS: /" POKET WIDTH HEIGHT SIZE Surface Pocket /" /" " " LOSURE MOUNT WITH LOSURE eiling Pocket /" /" " " losure Mount () with " losure () " /" losure Mount () with " losure () " /" losure Mount () with " losure () " /" HDarchitectural.com
Page. Page AFCO-Rail Order Guide. Level Rail - Balusters. Glass Rail Fixed Stairs - Balusters. Cable Rise & Run Chart Adj. Stairs - Balusters
2018 O-Rail Page Page Level Rail - alusters 2 lass Rail 6 ixed Stairs - alusters 3 able 7 Rise & Run hart 4 8 dj. Stairs - alusters 5 Level Rail - alusters 110 Series 2-3/4 Lengths: 4, 6, 8 & 10 200 Series
More informationAvailable Sizes (Both width and height are available in the 10mm unit.) Pull Cord Type (with limit stopper) 300~2000mm 400~2000mm 400~2000mm 6m 2
ROLL SRN L R ROLL SRN L R STNR TYP vailable Sizes (oth width and height are available in the 10mm unit.) Method Max. rea Ratio of : Pull ord Type Pull ord Type (with limit stopper) 300~00mm 400~00mm 400~00mm
More informationVCO O-ring Face Se al Fit tings
www.swagelok.com O-ring Face Se al Fit tings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 O-ring Face Seal Fittings ontents Features........................................
More informationBollard Post, Model R-8902
ollard Post, Model R-80 Removable Receiver with Lid (for detail, see sheet of ) Removable Receiver with hain (for detail, see sheet of ) Fixed Embedded Mount (for detail, see sheet of ) Flanged Surface
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
More informationW60 Spool & Sleeve Valves for ISO Bases (5599/I)
W60 Spool & Sleeve Valves for ases (59/I) 5/ Valves Single Solenoid Pilot Spring Return,7,,6 W60760 W6076 W60760 W6076 W60760 W6076 W6070 W607 * ase and electrical connector not included. 5/ Valves Double
More informationENGINE/ PUMP ADAPTERS
ENGINE/ PUMP PTERS Hayes Manufacturing, Inc. Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 TRNSMISSION PROUTS Fife Lake, MI 9633 Phone: 23-879-3372 Fax: 23-879-330 Table Of ontents Engine/ Mount
More informationHow to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø
Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note
More informationBronze-Plated Wear Plates
Slide ction omponents ronze-plated Wear Plates ronze-plated Wear Plates WP -M-E ronze-plated Wear Plates provide a long-lasting wear surface for ronze- Plated molds requiring slides, cams or flat surfaces
More informationGroove Dimensions For Standard Wear Ring Widths
NYLON WER RING TEHNIL INFORMTION T E T X D X W W - YLINDER ORE - ROD DIMETER - MINIMUM ORE MINUS.253/.256 D - MXIMUM ROD DIMETER PLUS.253/.256 E - GROOVE WIDTH T - THIKNESS OF WER RING W - WIDTH OF WER
More informationSkylight Rollers For Velux windows
For Velux windows Velux windows are identified by the Velux branded data plate on the sash of the window. No measuring required. page 13 features Steel barrel Extremely reliable, lightweight and strong.
More informationOPTIONS. Mounting ACCESSORIES FLEXAC.CLIP FLEXAC.EC FLEXAC.P6 FLEXAC.4.C04 FLEXAC.4.C10 PERFORMANCE
FLEX 4 FLEX features driver-less LE technology R9 Values of 60+ Optically clear thermoplastic coating rated for IP65, interior or exterior This product can run up to 100 ft from a single feed with uniform
More informationInstallation Instructions RB 500 Motorized Roller Shades Motorized Roller Shade W/ Fascia Series-Motor Operation...
Installation Instructions RB 500 Motorized Roller Shades Motorized Roller Shade W/ Fascia 5-36 Series-Motor Operation... Installation Option: Leveller b a c Install the brackets (L or R marked inside)
More informationGlenair Well-Master TM 260 Micro-D Withstands Extreme High Temperature
Section : Well-Master Micro- + P eader lenair Well-Master TM Micro- Withstands Extreme igh Temperature Standard Micro- connectors are rated for +125. lenair's MWM Micro- can withstand +150 continuous operating
More informationCable Glands. Special Applications. RoHS Compliance. Plastic & Metal Cable Glands Adapters Reducers & Enlargers Grommets & Accessories
able Glands RoHS ompliance Plastic & Metal able Glands dapters Reducers & Enlargers Grommets & ccessories L File #: E363825 cable gland is a device that allows the user to pass a cable, wire or tube into
More informationALF400 to 900, ALT-5/-9
Auto Feed Lube, Auto Feed Tank 00 to 900, -/-9 Standard Specifications Auto feed lube 00 00-0 00 00 00 900 - --IS- -9 AIR : OIL : Fluid Proof pressure Air. MPa 0. MPa.0 MPa (Note ) Operating pressure differential
More informationSECTION 5 CONVEY LINE & CONVEY LINE ACCESSORIES Tubing and Pipe
SETION 5 ONVEY LINE & ONVEY LINE ESSORIES Tubing and Pipe TUING ND PIPE STRIGHT LENGTHS vailable in cut-to-length; 20-ft to 40-ft random lengths vailable in: galvanized steel MTERIL FORM ITEM NUMER DESRIPTION
More informationMagnet Wire Terminals and Termination Systems Catalog SIAMEZE Terminals. Product Facts. Applications
SIMEZE Terminals Product Facts Terminates all copper magnet wire film insulations Eliminates need for pre-stripping conductors Moving eam contact design connects a wide range of magnet wire sizes with
More informationW68 Series Control Valves
Indianapolis hicago San Juan www.hollandapt.com 800-800-8464 W Series ontrol Valves W68 Series ontrol Valves pplication W68 valves are used in flow and pressure control applications. These valves are pneumatically
More informationUser Manual November 2014
H301-EC-LG-UP-BL Compatible with the following Z-Piezo stages Compatible with the following Okolab Controllers LEIC Super Z Galvo stage (SP5/SP8) H301-T-BL-PLUS UNO-COMBINED-CONTROLLER H401-T-DUL Page1
More informationMedium Pressure Valves, Fittings and Tubing Pressures to 21,000 psi
Medium Pressure Valves, ittings and Tubing MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality and reliability, backed
More informationVCO O-Ring Face Seal Fittings
O-Ring Face Seal Fittings www.swagelok.com O-Ring Face Seal Fittings /8 to sizes 36 or 36L stainless steel, NPT, S thread, and weld connections 2 Weld, VR,, Pipe, and Vacuum Fittings ontents Technical
More informationGeneral Information Gravity roller conveyors are available in many sizes and configurations as shown on the following pages. There are many factors to consider when selecting a gravity conveyor. The following
More informationSafety Edges Safedge Profiles Specifications
Presence Sensing Safety evices Specifications The ability of the Safedge profile to out perform competition lies in its innovative design. It uses a combination of non conductive rubber and flexible wire
More informationLad-Saf Powered Climb Assist System
Instructions for the following series products: Lad-Saf Powered limb ssist System Model Numbers: (See Figure 1) WRNING: These instructions must be provided to the user and installer of this equipment.
More informationModel AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K
Modular Type ilter Regulator with uilt-in Pressure auge eries W ilter Regulator with uilt-in Pressure auge eries W ominal filtration rating ccessory W2 /8, /4 W3 /4, 3/8 W /4, 3/8, /2 racket Pages 424
More informationThese products are available only in packs of 100 pieces
NYLON CABLE TIES SPECIFICATION Kompress Cable Ties are produced to comply with the requirements of Military Specification MIL-S 23190E and supplied in accordance with our ISO 9001 accreditation. They have
More informationInstallation Instructions
116-3027, 116-3017 X-Pando Adjustable Steel Protector Installation Instructions 1404 N. Marshall Ave. El Cajon CA. 92020 For technical support call us at (800) 368-3075 NB 6/28/10 607-0112 Step 1. Mounting
More informationOUTCAST PONTOONS. Discovery 9-IR
OUTCAST PONTOONS Discovery 9-IR A versatile craft that's at home on lakes and rivers. The Discovery 9-IR offers great stability on rivers but is amazingly responsive to fin kicks in still water. It is
More informationSprockets. Section Contents ROLLER CHAIN DRIVES
Sprockets ROLLER CHAIN DRIVES Section Contents General Description... 266-267 Horsepower Ratings Charts... 268-270 Selection Charts... 271-273 MINIATURE CHAIN SPROCKETS Catalog Number Selections/Dimensions...274
More informationRectangular (RPS) Square (SPS) Step Cut (SCP) Material SCP - Step Cut CI - Cast Iron
Ring Materials: Temp. Range 15% Glass filled PTFE -268 to 288 40% ronze filled PTFE -268 to 288 40% Glass Reinforced Nylon -240 to 149 15% Graphite Filled PTFE -72 to 232 15% Glass, 5% Moly Filled PTFE
More informationPTR Series Track Roller Assembly Plain/Cylindrical Stud Type Concentric Ball & Tapered Roller Bearings
PTR Series Assembly A B C D F FL H SD SL T Width Hex Width + PTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.125 1.125 0.75 0.437 1.00 7/16-20 0.50 3/16 0.5 0.03 0.78 PTR-1.25 1.250
More informationWINCH USER GUIDE WARN 3700 Utility Winch Part Number: 93700
WINCH USER GUIDE WARN 3700 Utility Winch Part Number: 93700 Your safety, and the safety of others, is very important. To help you make informed decisions about safety, we have provided installation and
More informationDEADBOLT SETS, MECHANICAL FEATURES
, MECHANICAL FEATURES 8000 SERIES LOW PROFILE CYLINDER DEADBOLT FOR 1 5 8 (41mm) DOOR PREP All deadbolts feature a ½ low-profile cylinder projection. CASE: Deadbolt case is formed of heavy gauge steel
More informationPSSS-Straight Square Steel Poles, 4", 5" FINISH
PSSS-Straight Square Steel s, ", " CATALOG NUMER: FIXTURE TYPE: PROJECT: POLE SPECIFICATIONS Conforms to ASTM-A 00 Grade : Minimum Yield Strength of 6,000 PSI. Wall Thickness Available in 11 Gauge (. )
More informationDM-FD (English) Dealer's Manual. Front derailleur FD-M9000 FD-M9020 FD-M9025 FD-M8000 FD-M8020 FD-M8025 FD-M612 FD-M617 FD-M618 FD-M672
(English) DM-FD0003-04 Front derailleur Dealer's Manual FD-M9000 FD-M9020 FD-M9025 FD-M8000 FD-M8020 FD-M8025 FD-M612 FD-M617 FD-M618 FD-M672 FD-M677 CONTENTS IMPORTANT NOTICE... 3 TO ENSURE SAFETY...
More informationTread Brake Assembly Instructions
reated: 9/06/202, Revision: 2/20/204 Tread rake ssembly Instructions Table of ontents: Lower rake omponents..2-4 able rake ssembly: rake Handle omponents..5-7 able ssembly....8 Tee Handle rake ssembly...9-0
More informationMedium Pressure Valves, Fittings and Tubing Pressures to 22,500 psi
Medium Pressure Valves, ittings and Tubing Pressures to 22,00 psi MXMTOR has been designing and manufacturing high pressure equipment for more than thirty years and has a worldwide reputation for quality
More informationOPENINGS AND REINFORCEMENTS 26
ASME BPVC.VIII.1-2015 UG-35.2 UG-36 (4) It is recognized that it is impractical to write requirements to cover the multiplicity of devices used for quick access, or to prevent negligent operation or the
More informationPrecision Escalator Products, Inc. O & K ESCALATORS TABLE OF CONTENTS
Precision Escalator Products, Inc. 147 North Michigan Avenue Kenilworth, New Jersey 07033 1-800-233-0838 IN NJ (908) 259-9009 FAX (908) 259-9013 O & K ESCALATORS TABLE OF CONTENTS COMB PLATES PAGE 2 ROLLERS
More informationLMU100/200 Series. Standard Specifications
Mist Spray Unit MU/ Series Intermittent spray to cutting and press gear chains, etc. Standard Specifications Inlet air Oil tank set range Oil Dynamic viscosity of oil ( C) Oil tank capacity (cm ) mbient
More informationTelescopic winch handle Speedfriend"
Winch handles, jib furlers JIB FURLERS - WINCH HANDLES - SPREADER COVERS 57 Floating winch handles Floating universal size winch handles Fitted with "Lock In" winch system; universal size for any winch;
More informationGreenhouseFabrics YARDAGE ESTIMATOR
GreenhouseFabrics YARDAGE ESTIMATOR Use this chart as a tool for estimates only. Please note, we cannot be held responsible for discrepancies in yardage The yardage needed may vary depending on the specific
More informationTUBE SIGN POST PRODUCTS
Western Canada TUBE Products Ltd. SIGN POST PRODUCTS Company Profile With over 100 years of experience on staff and the largest inventory in Western Canada, we have the ability to meet all your sign support
More informationPTRE Series Track Roller Assembly Plain/Cylindrical Stud Type Eccentric Ball & Tapered Roller Bearings
PTRE Series Assembly A B C D ED EL EO F FL H SD SL T -.001 Width Dia -.002 Offset Hex Shld Width + PTRE-1.00 1.000 0.75 0.437 1.00 0.625 0.48 0.03 7/16-20 0.52 3/16 0.7 0.03 0.78 PTRE-1.125 1.125 0.75
More informationReplaces Lesco 300 & 500 Parts
Replaces Lesco 300 & 500 Parts ItemNo R&R PartNo PartNo Description Req. Qty Price R&R Reels Available, Lifetime Guaranteed 1 R502871 020800 R&R Reel, 9 Blade, Fits 300 1 32,100 1 R502871H R&R Only R&R
More informationW68/W88/W98 Series CONTROL VALVES
W68/W88/W98 Series ONTROL VLVES Throttling or regulating valves are designed for flow and pressure control applications. Fluid flows against the tapered curve of the valve seat allowing a calculated amount
More informationShadeTech MSW Electric Shaped Tensioned Roller Blinds
ShadeTech MSW Electric Shaped Tensioned Roller Blinds Is available in many different sizes and shapes For inner and outer installation As well from left to right, as from right to left moving (for series
More informationSpecifications Testing & Adjusting Disassembly & Assembly
SB4191E00 Jul. 2005 Specifications Testing & Adjusting Supplement for Quad Lift Mast D20/25/30/32/33S-3 G/GC20/25/30/32P-3 G/GC20/25/30/32E-3 Important Safety Information Most accidents involving product
More informationHarness Range. Harnesses, support pads and straps for positioning and safety Compatible with Non-SOS wheelchairs and seating. Suitable for all ages.
Harness Range Harnesses, support pads and straps for positioning and safety ompatible with Non-SOS wheelchairs and seating. Suitable for all ages. specialisedorthoticservices.co.uk SOS04 ISS01 0318 Harnesses
More informationStandard Series Pipe Clamps Clamp Pair Selection
Standard Series Pipe lamps lamp Pair Selection Behringer s clamp pairs are available in different materials and incorporate a modular insert by group size. Standard series pipe clamps are available in
More informationPlok. Rapid Mating Multi-Pin Industrial Connector. Amphenol Industrial Sine Systems * Pyle Connectors Corporation
- Plok Rapid Mating Multi-Pin Industrial onnector mphenol Industrial Sine Systems * Pyle onnectors orporation eatures and enefits Rapid mate spring loaded, push to mate, pull to unmate coupling system
More informationInductive Proximity Sensors Global Plus Prox
July 2005 PG.05..T. -35 Global Plus ontents Overview................... -35 Model Selection, Sensors...... - Model Selection, ompatible onnector ables........... -37 Model Selection, ccessories... -37
More informationHIGH-PRESSURE RELIEF VALVES H-900HP SERIES
IPRSSUR RLI VLVS 9P SRIS TURS n 9P is available as /P products. n 316St.St. onstruction n Service up to psi n Set Pressure from 5 psig to psig ( 3.5 to 414 bar) n Identifying colored springs for each pressure
More informationSeries ACG/ARG/AWG. Regulator with Built-in Pressure Gauge Filter Regulator with Built-in Pressure Gauge
Regulator with uilt-in ressure auge ilter Regulator with uilt-in ressure auge Series /R/W - - - R- L- W- R L W V Visibility of pressure gauge is improved in various installation places When mounting on
More informationCHAIN LINK FENCE GATE
WALCOOM Walcoom Corporation CHAIN LINK FENCE GATE Chain link fence gate is a versatile product in many aspects, here, Walcoom provides buyers with sufficient strength and durability chain link fence gate
More informationThin pressure gauge. G401-W Series. Symbol Descriptions. A Connection A A. B Pressure display [MPa] P04 0 to 0.4MPa P10 0 to 1.
Thin pressure gauge G401-W Series Thin, compact design ideal for incorporating devices. Suitable for filter regulator, regulator, and pressure switch (P4000-W). onnection: O ring seal, set screw G401-W
More informationTrench Cable Rollers - Straight Pulling Application
Trench Cable Rollers - Straight Pulling Application Straight Cable Roller Straight Cable Roller - Heavy Duty Two Casing Supports, Roller body made of Precision Steel Tube. German Bearings protected against
More informationSuperstrut. Metal Framing. Surface Raceway and Lighting Systems. Material. Design Data. Electrical Raceway
Material Superstrut electrical raceway, fixture hanging channel, closure strip and accessories are manufactured from hot rolled strip steel. Standard finish for the accessories is GoldGalv. Design Data
More informationMeter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List
Issue/Rev. 0.0 (2/13) Meter, PD Series, E3 A1, S1 and E4 S1 Prior to 2005 Parts List Bulletin PO01001 33 Pre 1994 39 32 31 21 Pre 1994 45 18 48 44 30 78 57 46 Note: Angled housing not shown. The Most Trusted
More informationReplaces Ryan Sod Cutter Parts
Replaces Ryan Sod Cutter Parts O.E.M 1 R250356 R&R Only R&R 12" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250359 R&R Only R&R 15" Sod Cutter Blade, 1/4" x 2 1/2" 5,900 1 R250358 R&R Only R&R 16" Sod Cutter
More informationReplaces Lesco 300 & 500 Parts Cutting Unit
Replaces Lesco 300 & 500 Parts 3A 11 10 10 11 17 3 1 15 2 13 1 20 1 20 1 21 2 2 22 1B 30 1A 10 14 31 25 23 24 10 4 27 23 25 26 14 24 10 13A 5 5A 4A 16 0 R&R Reels Available, Lifetime Guaranteed 1 R50271
More informationSATURNSERIES INTERCHANGE > ISO (for the couplings)
NTERHANE > (for the couplings) TEHNAL FEATURES AND OPTONS nterchange (for the couplings) Sealing description Nitrile NR onnection system Push Available sizes Material /treatment Available threads from
More informationMethod of Test for Flat & Elongated Particles
Method of Test for Flat & Elongated Particles 1. Scope: This test is for determining the percentage by weight of coarse aggregate that have a maximum to minimum dimension greater than the specified ratio
More informationSGP-20S SGP-25S SGP-32S SGP-40S. Price $ $ $ $ Filtered compressed air, lubricated or non-lubricated
SGP-S -JW SELF-ENTERING PRLLEL PNEUMTI GRIPPER (SERIES SGP-S) Double-ting. Ptented bklsh djusting system. High performne in ompt size. The rugged onstrution ensures trouble-free long life nd relibility
More informationSingle slide rail system Linear shoring
E+S Trench shoring systems / Sliding rail systems Single slide rail system Linear shoring Single-rail linear shoring with U-type and rectangular roller unit Module length Length slide rail Panel height
More informationIntru-lok Flareless Bite Type Fittings
Intru-lok Flareless Bite Type Fittings 4300 atalog Flareless Bite Type Fittings Nuts, Ferrules, Inserts BIP Knurled Nut BI2 Nut BTI2 Nut and Ferrule TI2 Ferrule TIP Expander / Insert T23UI Insert HBI2
More informationSprocket Selection Guidelines
Sprocket Selection Guidelines Table 1 Information Necessary to Order Sprockets 1. Chain Size Number, type, or drawing number of the chain to be used on the sprocket. (The suitability of a sprocket depends
More informationVTRE Series Track Roller Assembly V-Grooved Stud Type Eccentric Ball & Tapered Roller Bearings
VTRE Series Track Assembly V-Grooved Type entric Ball & Tapered Bearings VTRE-3.50E A B C D ED EL EO F FL G H P SD SL T Type Track Width Dia -.002 Offset Groove Center Hex Point Shoulder Shoulder Width
More informationChapter 5 OPERATIONAL & MAINTENANCE SKILL DEVELOPMENT
Chapter 5 OPERATIONAL & MAINTENANCE SKILL DEVELOPMENT 5.1 INTRODUCTION Training and development is vital for every organization to cope up with the technological changes from time to time and to perform
More informationSO 9001 I ACCESSORIES
ISO 9001 ESSORIES ESSORIES INDEX Page In-Line Mounted Flow ontrol Valves 3 In-Line Mounted heck Valves 3 Quick Exhaust, heck and Shuttle Valves In-Line Ported Lockout Valves 5 Mufflers 6 Fittings 7-9 2
More informationCHAIN DRIVE Introduction Merits and demerits of chain drives Merits Demerits
70 CHAIN DRIVE Introduction Chain is used to transmit motion from one shaft to another shaft with the help of sprockets. Chain drives maintain a positive speed ratio between driving and driven components,
More informationWELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING
More informationSaf-T Vent EZ Seal Plus
Technical and Dimensional Data Saf-T Vent EZ Seal Plus Single Wall L 29-4 Stainless Steel Special Gas Vent Tested and Listed to UL 1738/UL S636 by Underwriters Laboratories, Inc 5030 orporate Exchange
More informationBERMAD Waterworks. Level Control Valve with Bi-Level Vertical Float. 700 Series Model B. Features and Benefits. Major Additional Features
Level ontrol Valve with i-level Vertical Float Reservoir filling Very low supply-pressure Low noise generation Energy cost-critical systems Systems with poor water quality Reservoir outlet Distribution
More informationMS Back-up, Spiral
MS 28782 Back-up, Spiral 1. Material: MIL-R-8791. 2. Surface must be smooth and free from irregularities. 4. Z gap dimension to be met with retainer over a mandrel of M diameter +.000 -.002. 5. Dash numbers
More informationSuperstrut. Metal Framing. Surface Raceway and Lighting Systems
Material Superstrut electrical raceway, fixture hanging channel, closure strip and accessories are manufactured from hot rolled strip steel. Standard finish for the accessories is GoldGalv. Design Data
More informationCAUTION - PUT SAFETY FIRST
www.shoremaster.com DVS Vertical Lift (Double V Side): Frame ssembly Instructions. Models: 500DVS - 0ft Wide, 5000lb Capacity - Part #: 0079 600DVS - 0ft Wide, 6000lb Capacity - Part #: 0033.. 3.. 5. CUTION
More informationChain Drives ELEMEN MESIN II
Chain Drives ELEMEN MESIN II Introduction Belt and rope drives slipping may occur To avoid slipping Chains The chains are made up of number of rigid links which are hinged together by pin joints in order
More informationUSER INSTRUCTION MANUAL CONCRETE DETENT ANCHORAGE CONNECTOR
The Ultimate in Fall Protection Instructions for the following series products: oncrete Detent age onnector Model Numbers: 2101000, 2101002, 2101004, 2101000, 2101002, 2101004, 2100152 USER INSTRUTION
More informationE SERIES. Specification. E Series. Relief and Flow Control Valves O M O M EIC-H Model No. Description
4 Ω-1 Ω Series Proportional Electro-ydraulic This relief and flow control valve is an energy-saving valve that supplies the minimum pressure and flow necessary for actuator drive. Since this valve controls
More informationTRIPLE CLAMPS AND HANDLEBARS TRIPLE CLAMPS HANDLEBARS & SFS TRIPLE CLAMPS
TRIPLE CLMPS ND HNDLERS WWW.NK-NEKEN.COM TRIPLE CLMPS HNDLERS & SFS TRIPLE CLMPS D I S T R I U T E D Y WWW.PRTSEUROPE.EU HNDLERS VRILE DIMETER HNDLERS WITH CONICL DESIGN 10 T6 aluminum aerospace quality
More informationw w w.ro swellmarine. com Part 1 Installation Part # C # C
w w w.ro swellmarine. com Pro Bimini Part 1 Installation Part # C915-119151 # C915-119152 Information: info@roswellmarine.com If you have any questions please call : 1-321-638-1331 REV 16-JUL-18 Moomba
More informationGALAXY DESIGN INSTRUCTIONS VS Small Scrolls Small Scrolls Medium - Lage scrolls Medium - Lage scrolls
Panels Yardage Chart (small) Panels Yardage Chart (medium-large) Small Scrolls Small Scrolls Medium - Lage scrolls Medium - Lage scrolls Scroll Panel (Puddle-Tail) Yardage Table (M-C) Scroll Panel (Flat)
More informationDie Temperature Control Fitting Series
http://www.pisco.co.jp FITTING ONTROLLER VALVE TUE MAKE-TO-ORDER PRODUTS Push-In Fitting Type Molding oupling Fitting 244 Push-In Fitting Type for. Thermal Oil, lean Water and Air for Fluid Medium. No
More informationLatex & Silflex Wrist & Neck Seals
Latex & Silflex Wrist & Neck Seals Latex Neck & Cuff Seals Features & Maintenance: All seals are exceptionally supple and give an excellent life expectancy. Cuff seals come in two styles tapered or bottle
More information6146XX-X OPEN STYLE HOSE REELS
OPERATOR S MANUAL INCLUDING: OPERATION, INSTALLATION & MAINTENANCE 6146XX-XXX OPEN STYLE HOSE REELS LOW, MEDIUM & HIGH PRESSURE (FOR AIR, WATER & PETROLEUM PRODUCTS) 6146XX-X RELEASED: 2-5-90 REVISED:
More informationOPERATOR S MANUAL OMGX10784 C0
0 Scotts Lawn Tractors S1642, S1742, and S2046 OPRTOR S MNUL OMGX10784 0 North merican Version Litho in U.S.. SRVI MOWR Service Mower void Injury From ontacting lades 2. Remove mower deck. (See Removing
More informationFTR Series Track Roller Assembly Flanged Stud Type Concentric Ball & Tapered Roller Bearings
FTR Series Track Assembly d Type Concentric Ball & Tapered Bearings Type Track A B C D F FL H L M SD SL T Hex Dia + FTR-1.00 1.000 0.75 0.437 1.00 7/16-20 0.50 3/16 1.38 0.22 0.5 0.03 0.78 FTR-1.125 1.125
More informationCAISSON SHAFT SYSTEM
CAISSON SHAFT SYSTEM Installation Guide INSTALLATION GUIDE FOR DN2000 TO DN3660 UNITS PLATE JOINTING SYSTEM This guide is to be used for the Installation of CPM Group Ltd caisson shaft units which use
More informationRoller System 32 / 40 Open Cassette Fitting & Operating Instructions
Roller System 32 / 40 Open Cassette Fitting & Operating Instructions Roller System 32 / 40 Open Cassette Fitting & Operating Instructions Carefully unwrap the roller blind and its associated brackets.
More informationParts Manual. Versa Hand Arm
Parts Manual Versa Hand Arm Insist Versa Hand To ensure u i our web site at www.labrieplus.com, or contact us at -800-23-277 USA or -877-83-8250 Canada twenty four hours a day. seven days a week. We are
More informationBall Valves. Stainless Steel Ball Valves Pag Pag Pag Pag Pag Pag. 9.
86300 Pag. 9.6 86310 Pag. 9.6 86320 Pag. 9.6 86330 Pag. 9.6 86700 Pag. 9.6 86710 Pag. 9.7 86720 Pag. 9.7 6300 Pag. 9.7 6310 Pag. 9.7 6400 Pag. 9.8 6410 Pag. 9.8 6560 Pag. 9.8 6570 Pag. 9.8 86900 Pag. 9.9
More informationNew Models! UX.1600 UX.20000
atalog No. 07105 Ultra Force Extended UX eries New Models! UX.1600 UX.000 Patent pending Reduce die construction costs ong stroke lengths Directly upgrade IO 750-10000 models Variety of attachable and
More informationV-PLOW. ACCUFLO Conveyor Belt Cleaning System MAX SYSTEMS GUIDE. Engineering. LIB-CP-SYS-01-E Rev.9. Page 1
ACCUFLO Conveyor Belt Cleaning System Page 1 Conveyor Belt Cleaning System - System Nomenclature CATGORY MAINFRAM INFORMATION BLAD INFORMATION CP=CONVYOR PRODUCTS CP - PA - 36 M - G 83 SYSTM TYP BLT WIDTH
More informationRACING TO PERFORMANCE DETAIL B (11) Ra 3,2
(9) 0,5 X 45 RCING TO PERFORMNCE DETIL B (11) B www.afam.com Ra 3,2 (7) Sprockets 4 FRONT SPROCKETS fam uses the best alloy steel available to produce their front sprockets. Minimum tolerances combined
More informationU.S. TSUBAKI BS/DIN ROLLER CHAIN
TSUBAKI BS/DIN ROLLER CHAIN BS/DIN Roller Chain These chains are manufactured to International Standards Organization metric dimensions (ISO 606), British Standard (BS 228), and DIN 8187. They are available
More informationCABLE CONNECTORS CABLE CONNECTORS
Terminal blocks Terminal blocks E-loks... 4 Multipolar terminal strips... 49 Protected distribution terminals E-Rail... 50 Preinsulated terminals Preinsulated copper terminals... 53 Preinsulated end-sleeve
More informationE-116 Assembly Guide
E-116 Assembly Guide Table of Contents Overview of the assembly.... 2 1. Cable housing installation.... 3 2. Front brake installation.... 4 3. Rear brake installation... 5-6 4. Seatpost installation....
More information