Artistic Bike Racks and Traffic Modification for Bike Lanes

Community Development Department Engineering Division Artistic Bike Racks and Traffic Modification for Bike Lanes Project #: 2017-03 Bid Date: June 6, 2017 1. Notice Inviting Bids 2. Bid Schedule 3. Addendums 4. Plan Holders List 5. Bid Summary

June 2, 2017 ADDENDUM NO. 2 Artistic Bike Racks and Traffic Striping Modification for Bike Lanes Project # 2017-03 This addendum is hereby made part of the Request for Proposal to the same extent as though it was originally included. 1. Replace page A-1 of the specifications with the attached A-1. Modifications to Contractor Licenses. 2. Remove existing Bid Schedule and replace with attached Bid Schedule Pages C-7 to C- 11 3. Remove existing Special Provisions starting at page F-3 and replace with attached Special Provisions starting at page F-3. 4. Insert Bicycle Rack Configuration for installation document at the end of attachment 2. 5. Complete the Acknowledgement Receipt of Addendum(s). Any questions, technical or otherwise, pertaining to this Addendum must be submitted IN WRITING and directed ONLY to: Domingo D. Gonzales dgonzales@barstowca.org City of Barstow Engineering Division 220 E. Mountain View St, Barstow CA 92311 Telephone: (760)255-5156

NOTICE INVITING SEALED BIDS ARTISTIC BIKE RACKS AND TRAFFIC STRIPING MODIFICATIONS FOR BIKE LANES PROJECT NO. 2017-03 IN THE CITY OF BARSTOW, CALIFORNIA PUBLIC NOTICE IS HEREBY GIVEN that the City of Barstow (City)CITY, invites sealed bids for the above stated project and will receive such bids in the office of the City Clerk, 220 E. Mountain View St, Suite A, Barstow, CA 92311 up to the hour of 2:00 p.m., on the 6th day of June, 2017. The bids will be publicly opened and read at 2:00 p.m. on the 6th day of June, 2017, in the office of the City Clerk of the City of Barstow, 220 E. Mountain View St., Ste. A, Barstow, California 92311. The Engineer s Estimate for this project is $145,000.00 The project consists of fabricating and installing artistic bike racks, removing existing striping, installing inductive traffic loops and doing all appurtenant work in place and ready for use Copies of the plans, specifications, and contract documents are available from the City of Barstow, 220 E. Mountain View St, Suite A, Barstow, CA 92311 upon payment of a $25.00 non-refundable fee if picked up, or payment of a $35.00 non-refundable fee if mailed. In accordance with the provisions of California Public Contract Code 3300, and Business and Professions Code 7028.15(e), the City has determined that the contractor shall possess any of the following valid Class A, Class B, C8, C12, C23, and/or C32, contractor s license at the time that the contract is awarded. Failure to possess the specified license shall render the bid as non-responsive and shall act as a bar to award of the contract to any bidder not possessing said license at the time of the award. CONTRACTORS ARE REQUIRED BY LAW TO BE LICENSED AND REGULATED BY THE CONTRACTORS STATE LICENSE BOARD. ANY QUESTIONS CONCERNING A CONTRACTOR MAY BE REFERRED TO THE REGISTRAR, CONTRACTORS STATE LICENSE BOARD, P.O. BOX 26000 SACRAMENTO, CA 95826. At the time the contract is awarded, the contractor shall be properly licensed in accordance with the laws of this state. The first payment for work or material shall not be made unless and until the Registrar of Contractors verifies to the City that the records of the Contractors State License Board indicate that the contractor was properly licensed at the time the contract was awarded. Any bidder or contractor not so licensed shall be subject to all legal penalties imposed by law including, but not limited to, any appropriate disciplinary action by the Contractors State Board. Failure of the bidder to obtain proper and adequate licensing for an award of a contract shall constitute a failure to execute the contract and shall result in the forfeiture of the security of the bidder. (Public Contract Code 20103.5) CONTRACTORS AND SUBCONTRACTORS ARE ALSO REQUIRED TO BE REGISTERED WITH THE CALIFORNIA DEPARTMENT OF INDUSTRIAL RELATIONS. A contractor or subcontractor shall not be qualified to bid on, be listed on a bid proposal for, or perform any public work contract unless it is currently registered with the California Department of Industrial Relations as described in Labor Code 1725.5. Bids must be prepared on the approved bid forms in conformance with INSTRUCTION TO BIDDERS and submitted in the envelopes provided, sealed and plainly marked on the outside: SEALED BID FOR ARTISTIC BIKE RACKS AND TRAFFIC STRIPING MODIFICATIONS FOR BIKE LANES PROJECT NO. 2017-03 A-1

BID SCHEDULE (Continued) ARTISTIC BIKE RACKS AND TRAFFIC STRIPING MODIFICATIONS FOR BIKE LANES PROJECT NO. 2017-03 IN THE CITY OF BARSTOW, CALIFORNIA Bid Schedule 1 Item Section Description Unit Estimated Quantity 1. 9-3.4 Mobilization LS 1 Unit Price Total Price 2. 7-10 Traffic Control LS 1 3. 310-5.6.6 Striping and Markings Removal LS 1 4. 703 Inductive Traffic Loops EA 8 5 700 Artistic Bike Racks EA 24 6 701 Bike Repair Station EA 2 7. 704 Installation of Bike Racks and Bike Repair Station EA 26 The Contractor shall be responsible for calculating and providing unit prices for the schedule. The proposal schedule shall include all costs for services, labor, materials, equipment, and installation associated in completing the work in place per the Specifications and details. Bid Schedule 1 Total: $ Bid Schedule 1 Total (in words): (Company Name of Bidder) (Date) Bid Schedule 2 Striping and Marking Removal and installation of Traffic Loops Item Section Description Unit Estimated Quantity Unit Price 1. 9-3.4 Mobilization LS 1 Total Price 2. 7-10 Traffic Control LS 1 3. 310-5.6.6 Striping and Markings Removal LS 1 4. 703 Inductive Traffic Loops EA 8 APROVED FOR USE ON 7/21/16 C-7

The Contractor shall be responsible for calculating and providing unit prices for the schedule. The proposal schedule shall include all costs for services, labor, materials, equipment, and installation associated in completing the work in place per the Specifications and details. Bid Schedule 2 Total: $ Bid Schedule 2 Total (in words): (Company Name of Bidder) (Date) Bid Schedule 3 Supplying, Fabrication, Construction, Installation Bike Components Item Section Description Unit Estimated Quantity Unit Price 1. 9-3.4 Mobilization LS 1 1. 700 Fabrication and Installation of Artistic Bike Racks EA 24 2. 701 Supplying and Installation of Bike Repair Station EA 2 3. 704 Installation of Artistic Bike Racks ad Bike Repair Station EA 26 Total Price The Contractor shall be responsible for calculating and providing unit prices for the schedule. The proposal schedule shall include all costs for services, labor, materials, equipment, and installation associated in completing the work in place per the Specifications and details. Bid Schedule 3 Total: $ Bid Schedule 3 Total (in words): (Company Name of Bidder) Bid Schedule 4 Supplying and /or Fabrication of Bike Components only Item Section Description Unit Estimated Quantity 1. 700 Artistic Bike Racks EA 24 2. 701 Bike Repair Station EA 2 (Date) Unit Price Total Price APROVED FOR USE ON 7/21/16 C-8

APROVED FOR USE ON 7/21/16 C-10

BID SCHEDULE (Continued) ARTISTIC BIKE RACKS AND TRAFFIC STRIPING MODIFICATIONS FOR BIKE LANES PROJECT NO. 2017-03 IN THE CITY OF BARSTOW, CALIFORNIA Bid Summary Bid schedule #1 total amount: Bid schedule #1 total in words Bid schedule #2 total amount: Bid schedule #2 total in words Bid schedule #3 total amount: Bid schedule #3 total in words Bid schedule #4 total amount: Bid schedule #4 total in words APROVED FOR USE ON 7/21/16 C-11

SPECIAL PROVISIONS Artistic Bike Racks and Traffic Striping Modifications for Bike Lanes PROJECT NO. 2017-03 IN THE CITY OF BARSTOW, CALIFORNIA 700 Artistic Bike Racks The contractor shall be responsible for the fabrication, supplying and shipping of the Artistic Bike Racks. The finish product shall include all necessary hardware and components to be install by a contractor or public works employee. Fabricator must be willing to work with staff on design and colors. General There will be eight (8) set of three (3) artistic bike racks which represents eight different Route 66 states. Racks must be: Capable of withstanding adverse weather conditions including high winds, high temperatures, humidity, storms, and etc. Be able to withstand a high traffic, public environment. Take into consideration the safety of the users, public and ADA regulations. The top of the rack can be a maximum of 36 tall. Except for the bicycle rack supporting brackets, the shortest section must be a minimum of 27 tall. The space between the rack features must be larger than 9 or smaller than 3.5 to avoid children trapping their heads. Must accommodate at least two bicycles upright by its frame Must allow bicycle frame and one of the wheels to be secured using a standard u-lock. Bicycles must be locked parallel to the rack with wheels on the ground. Must provide two locking points, at least 6 inches apart, above the bicycle s center of gravity. Locking points must have a maximum thickness of 2 and minimum thickness of 1. Must have a gap near the bottom of the rack for pedal clearance. Must have a base that can be flange (base plate) mounted. The design must not include sharp edges. Execution Contractor shall fabricate, construct, supply and ship, all components, hardware, structures, and products to ensure that the bicycle racks are functional including lighting and can be installed by a contractor or public works employee(s) Contractor shall fabricate state signs into the bicycle racks as indicated on the plans. Materials Constructed of permanent materials, be vandal resistant and virtually maintenance-free. Designed to be structurally secured to concrete foundation and anti-theft proof. Must be powder coated. Shall have anti-graffiti coating. Fabrications shall be constructed with steel material or equal material. Each bicycle rack shall be layered elements as indicate on the plans. Protection Protect all finished work during progress of coating application and make good any damage done to such work in manner satisfactory to City. Properly cover and protect all finished work of other trades. APROVED FOR USE ON 7/21/16 F-3

Handling and application of materials of this trade shall be at the entire risk of Contractor, and he will be held responsible for replacement or suitable repair of any damaged portions of his own work and the work of other trades; all to City s entire satisfaction and without additional remunerations. Bonds Supplying only Artistic Bicycle Racks or Bicycle Repair Station will not require bonds to be submitted. Measurement and Payment Fabrication, supplying and shipping of Artistic Bike Racks shall be paid for at the contract unit bid for each bike rack and shall be considered full compensation for all meetings, fabrication, coating, supplying, shipping, materials, hardware, equipment, components, and all other incidentals necessary to accomplish this item of work and no further compensation will be allowed therefore. 701 Bicycle Repair Station The bicycle repair station shall include all the tools necessary to perform basic bike repairs and maintenance. All tools and an air pump shall be securely attached to the stand with stainless steel cables and tamper-proof fasteners. The stand shall provide a method to hang a bike from a hanger arm that allows the pedals and wheels to spin freely while making adjustments and to allow changing a flat, adjusting brakes, and derailleurs. Bicycle repair station may be FIXIT by DERO or equal. Measurement and Payment Bicycle Repair Station shall be paid for at the contract unit bid for each bicycle repair station and shall be considered full compensation for all supplying. shipping, coating, materials, tools, hardware, components, labor, and all other incidentals necessary to accomplish this item of work and no further compensation will be allowed therefore. Bonds Supplying only Artistic Bicycle Racks or Bicycle Repair Station will not require bonds to be submitted. 703 Inductive Loop Detectors Inductive loop detectors shall conform to Section 700-5.8.2 of the SSPWC. Measurement and Payment Inductive loop detectors will be paid for at the contract unit bid price for each and shall be considered full compensation saw cutting, removals, labor, tools, and all other incidentals necessary to accomplish this item of work and no further compensation will be allowed therefore. 704 Installation of Bike Racks and Bicycle Repair Station Contractor shall install Artistic Bike Racks and Bicycle Repair Station. Concrete shall conform to Section 201 and 302-6 of the SSPWC and the manufactures recommendation or these construction plans for this project. Full concrete sidewalk panels (Typically 5x5) rack shall be removed and replaced to accommodate the installation. Measurement and Payment Installation of Artistic Bike Racks shall be paid for at the contract unit bid price for each bike rack or Bicycle Repair Station and shall be considered full compensation for saw cutting, breaking, removals, placement of concrete pavement and footings, drilling, modifying, electrical, materials, fabricating, equipment, components, labor, tools, and all other incidentals necessary to accomplish this item of work and no further compensation will be allowed therefore. APROVED FOR USE ON 7/21/16 F-4

BICYCLE RACK CONFIGURATION FOR INSTALLATION PERPENDICULAR TO CURB PARALLEL TO CURB

ACKNOWLEDGEMENT RECEIPT OF ADDENDUM(S) Artistic Bike Racks and Traffic Striping Modification for Bike Lanes Project # 2017-03 Company/Organization: Address: I hereby acknowledge by signing this form, that our firm has receipt of all Addenda issued. Signed Date Printed or Typed Name Title

NOTICE INVITING SEALED BIDS ARTISTIC BIKE RACKS AND TRAFFIC STRIPING MODIFICATIONS FOR BIKE LANES PROJECT NO. 2017-03 IN THE CITY OF BARSTOW, CALIFORNIA PUBLIC NOTICE IS HEREBY GIVEN that the City of Barstow (City)CITY, invites sealed bids for the above stated project and will receive such bids in the office of the City Clerk, 220 E. Mountain View St, Suite A, Barstow, CA 92311 up to the hour of 2:00 p.m., on the 6th day of June, 2017. The bids will be publicly opened and read at 2:00 p.m. on the 6th day of June, 2017, in the office of the City Clerk of the City of Barstow, 220 E. Mountain View St., Ste. A, Barstow, California 92311. The Engineer s Estimate for this project is $145,000.00 The project consists of fabricating and installing artistic bike racks, removing existing striping, installing inductive traffic loops and doing all appurtenant work in place and ready for use Copies of the plans, specifications, and contract documents are available from the City of Barstow, 220 E. Mountain View St, Suite A, Barstow, CA 92311 upon payment of a $25.00 non-refundable fee if picked up, or payment of a $35.00 non-refundable fee if mailed. In accordance with the provisions of California Public Contract Code 3300, and Business and Professions Code 7028.15(e), the City has determined that the contractor shall possess a valid Class A, and/or C12 and/or C23 contractor s license at the time that the contract is awarded. Failure to possess the specified license shall render the bid as nonresponsive and shall act as a bar to award of the contract to any bidder not possessing said license at the time of the award. CONTRACTORS ARE REQUIRED BY LAW TO BE LICENSED AND REGULATED BY THE CONTRACTORS STATE LICENSE BOARD. ANY QUESTIONS CONCERNING A CONTRACTOR MAY BE REFERRED TO THE REGISTRAR, CONTRACTORS STATE LICENSE BOARD, P.O. BOX 26000 SACRAMENTO, CA 95826. At the time the contract is awarded, the contractor shall be properly licensed in accordance with the laws of this state. The first payment for work or material shall not be made unless and until the Registrar of Contractors verifies to the City that the records of the Contractors State License Board indicate that the contractor was properly licensed at the time the contract was awarded. Any bidder or contractor not so licensed shall be subject to all legal penalties imposed by law including, but not limited to, any appropriate disciplinary action by the Contractors State Board. Failure of the bidder to obtain proper and adequate licensing for an award of a contract shall constitute a failure to execute the contract and shall result in the forfeiture of the security of the bidder. (Public Contract Code 20103.5) CONTRACTORS AND SUBCONTRACTORS ARE ALSO REQUIRED TO BE REGISTERED WITH THE CALIFORNIA DEPARTMENT OF INDUSTRIAL RELATIONS. A contractor or subcontractor shall not be qualified to bid on, be listed on a bid proposal for, or perform any public work contract unless it is currently registered with the California Department of Industrial Relations as described in Labor Code 1725.5. Bids must be prepared on the approved bid forms in conformance with INSTRUCTION TO BIDDERS and submitted in the envelopes provided, sealed and plainly marked on the outside: SEALED BID FOR ARTISTIC BIKE RACKS AND TRAFFIC STRIPING MODIFICATIONS FOR BIKE LANES PROJECT NO. 2017-03 A-1

DO NOT OPEN WITH REGULAR MAIL The bid must be accompanied by a bid guarantee in the amount of 10% of the total bid by 2:00 p.m. ON THE DATE ADVERTISED FOR THE OPENING OF BIDS. More specifically, pursuant to Public Contract Code 20170 and 20171, all bids for the project shall be presented under sealed cover and shall be accompanied by one of the following forms of bidder s security in the amount of ten percent (10%) of the bid: (a) cash; (b) a cashier s check made payable to the City of Barstow; (c) a certified check made payable to the City of Barstow; or (d) a bidder s bond executed by an admitted surety insurer, made payable to the City of Barstow. Such security shall be forfeited should the successful bidder to whom the contract is awarded fails to timely execute the contract and deliver the necessary bonds and insurance certificates as specified in the contract documents. To the extent applicable, at any time during the term of the Agreement for the proposed project, the successful bidder may, at its own expense, substitute securities equivalent to the amount withheld as retention (or the retained percentage) in accordance with Public Contract Code 22300. Pursuant to California Civil Code 9550, a payment bond is required to be submitted for all projects estimated in excess of $25,000.00. The City has determined that the proposed project is a public works subject to the provisions of Labor Code 1720 thereby requiring the Contractor to pay the prevailing wage rates for all work performed under the Contract. Accordingly, the proposed project is subject to compliance monitoring and enforcement by the California Department of Industrial Relations. The City reserves the right to reject any and all bids. If you have any questions, please contact Domingo D. Gonzales, at (760) 255-5156. BY ORDER OF the City Council of the City of Barstow, California. A-2

BID SCHEDULE (Continued) ARTISTIC BIKE RACKS AND TRAFFIC STRIPING MODIFICATIONS FOR BIKE LANES PROJECT NO. 2017-03 IN THE CITY OF BARSTOW, CALIFORNIA Bid Schedule 1 Item Section Description Unit Estimated Quantity 1. 9-3.4 Mobilization LS 1 Unit Price Total Price 2. 7-10 Traffic Control LS 1 3. 310-5.6.6 Striping and Markings Removal LS 1 4. 703 Inductive Traffic Loops EA 1 5 700 Artistic Bike Racks EA 24 6 701 Bike Repair Station EA 2 The Contractor shall be responsible for calculating and providing unit prices for the schedule. The proposal schedule shall include all costs for services, labor, materials, equipment, and installation associated in completing the work in place per the Specifications and details. Bid Schedule 1 Total: $ Bid Schedule 1 Total (in words): (Company Name of Bidder) (Date) Bid Schedule 2 Item Section Description Unit Estimated Quantity 1. 9-3.4 Mobilization LS 1 Unit Price Total Price 2. 7-10 Traffic Control LS 1 3. 310-5.6.6 Striping and Markings Removal LS 1 4. 703 Inductive Traffic Loops EA 1 APROVED FOR USE ON 7/21/16 C-7

The Contractor shall be responsible for calculating and providing unit prices for the schedule. The proposal schedule shall include all costs for services, labor, materials, equipment, and installation associated in completing the work in place per the Specifications and details. Bid Schedule 2 Total: $ Bid Schedule 2 Total (in words): (Company Name of Bidder) Bid Schedule 3 Item Section Description Unit Estimated Quantity 1. 9-3.4 Mobilization LS 1 1. 700 Artistic Bike Racks EA 24 2. 701 Bike Repair Station EA 2 (Date) Unit Price Total Price The Contractor shall be responsible for calculating and providing unit prices for the schedule. The proposal schedule shall include all costs for services, labor, materials, equipment, and installation associated in completing the work in place per the Specifications and details. Bid Schedule 3 Total: $ Bid Schedule 3 Total (in words): (Company Name of Bidder) (Date) The City reserves the right to award only on bid schedule #1, bid schedule #2, bid schedule #3 or the combination of bid schedule 2 and schedule 3 APROVED FOR USE ON 7/21/16 C-8

Image of an existing bike rack similar to the City of Barstow Design. City of Barstow design for artistic bike racks. City of Barstow s Artistic Bike Racks Concept 2017 Each artistic bike rack will represent one of the eight (8) states along Historic Route 66 City of Barstow s Artistic Bike Racks Concept 2017

Example of the bike rack configuration. Bike Repair Station Bike Repair Station Components

June 2, 2017 ADDENDUM NO. 1 Artistic Bike Racks and Traffic Striping Modification for Bike Lanes Project # 2017-03 This addendum is hereby made part of the Request for Proposal to the same extent as though it was originally included. 1. The Bid Date & Time has been changed from June 6, 2017 to June 13, 2017 at 2:00 p.m. 2. Replace page A-1 of the specifications with the attached A-1. Modifications to Contractor Licenses. 3. Complete the Acknowledgement Receipt of Addendum(s). Any questions, technical or otherwise, pertaining to this Addendum must be submitted IN WRITING and directed ONLY to: Domingo D. Gonzales dgonzales@barstowca.org City of Barstow Engineering Division 220 E. Mountain View St, Barstow CA 92311 Telephone: (760)255-5156.

CITY OF BARSTOW 220 E MOUNTAIN VIEW ST BARSTOW CA 92311 Plan Holders TEL::(760) 255-5156 FAX::(760) 256-1750 Project # 2017-03 Artistic Bike Racks and Traffic Striping Modifications Project Company Name: Address: Region: Phone Fax: American Bicycle Security Company P.O. Box 7359 Ventura, CA 93006 (800) 245-3723 (805) 933-1865 Peak Racks 637 Woodbridge St San Luis Obispo, CA 93401 (805) 235-8812 California Striping & Sealcoating 225 Walnut Glen Escondido, CA 92027 (619) 384-3015 (760) 975-3266 Cal Stripe, Inc 375 South G Street San Bernardino, CA 92410 (909) 884-7170 Graber Manufacturing Inc 1080 Uniek Dr. Waunakee, WI 53597 (608) 849-1080 (608) 849-1081 BikeKeeper Sterndahl Enterprises Inc. 8461 #173 Lake Worth Road Lake Worth, Fl 33467 (561) 209-6863 11861 Branford Street Sun Valley, Ca 91352 (818) 834-8199 (818) 834-8618 Urban Racks 936 Peace Portal Drive Blaine, Wa 98230 (206) 734-7611 PTM General Engineering Services, Inc 5942 Acorn Streeet Riverside, CA 92504 (951) 710-1000 (951) 710-1006 Number of Plan Holders 9 Date: 6/2/2017

ARTISTIC BIKE RACKS AND TRAFFIC STRIPING MODIFICATIONS FOR BIKE LANES Project No. 2017-03 Bid Summary PTM General Engineering Bid Schedule 1 Engineer's Estimate Services, Inc. Item Description Unit Est. Qty. Unit Price Total Price Unit Price Total Price 1 Mobilization LS 1 $ 5,000.00 $ 5,000.00 $ 7,500.00 $ 7,500.00 2 Traffic Control LS 1 $ 15,000.00 $ 15,000.00 $ 22,500.00 $ 22,500.00 3 Striping and Markings Removal LS 1 $ 40,000.00 $ 40,000.00 $ 57,999.00 $ 57,999.00 4 Inductive Traffic Loops EA 8 $ 900.00 $ 7,200.00 $ 450.00 $ 3,600.00 5 Artistic Bike Racks EA 24 $ 2,000.00 $ 48,000.00 $ 1,100.00 $ 26,400.00 6 Bike Repair Station EA 2 $ 2,000.00 $ 4,000.00 $ 1,700.00 $ 3,400.00 7 Installation of Artistic Bike Racks and Bike Repair Station EA 26 $ 1,000.00 $ 26,000.00 $ 1,100.00 $ 28,600.00 $ 145,200.00 $ 149,999.00 PTM General Engineering Bid Schedule 2 Engineer's Estimate Services, Inc. Item Description Unit Est. Qty. Unit Price Total Price Unit Price Total Price 1 Mobilization LS 1 $ 5,000.00 $ 5,000.00 $ 5,000.00 $ 5,000.00 2 Traffic Control LS 1 $ 15,000.00 $ 15,000.00 $ 20,000.00 $ 20,000.00 3 Striping and Markings Removal LS 1 $ 40,000.00 $ 40,000.00 $ 61,000.00 $ 61,000.00 4 Inductive Traffic Loops EA 8 $ 800.00 $ 6,400.00 $ 450.00 $ 3,600.00 $ 66,400.00 $ 89,600.00 PTM General Engineering Bid Schedule 3 Engineer's Estimate Services, Inc. Item Description Unit Est. Qty. Unit Price Total Price Unit Price Total Price 1 Mobilization LS 1 $ 5,000.00 $ 5,000.00 $ 5,000.00 $ 5,000.00 2 Fabrication and Supplying of Artistic Bike Racks EA 24 $ 2,000.00 $ 48,000.00 $ 1,100.00 $ 26,400.00 3 Supplying Bike Repair Station EA 2 $ 2,000.00 $ 4,000.00 $ 1,700.00 $ 3,400.00 4 Installation of Artistic Bike Racks and Bike Repair Station EA 26 $ 1,000.00 $ 26,000.00 $ 1,100.00 $ 28,600.00 $ 83,000.00 $ 63,400.00 Bid Schedule 4 Engineer's Estimate PTM General Engineering Services, Inc. Item Description Unit Est. Qty. Unit Price Total Price Unit Price Total Price 1 Fabrication and Supplying Artistic Bike Racks EA 24 $ 2,000.00 $ 48,000.00 $ 1,300.00 $ 31,200.00 2 Supplying Bike Repair Station Ea 2 $ 2,000.00 $ 4,000.00 $ 1,900.00 $ 3,800.00 $ 52,000.00 $ 35,000.00