FRS 105. Firefighters Intermediate Skills II. 45 clock hours 3 credit hours

Similar documents
UNIT OBJECTIVES Upon completion of this unit of study, the student should be able to:

Chapter 1 FF I Orientation and Fire Service History

17 15 NOVA SCOTIA FIRE SERVICE TRAINING EXTERIOR LEVEL (PHASE 2)

Idaho Fire Service Technology Fire Fighter II

Structural Firefighting Review: Fire Attack

SKILL VERIFICATION BOOK FIREFIGHTER I MODULE I FIRE PROTECTION BUREAU. Assigned to: Name:

Wayne County Community College District

Ocean County Fire Academy. Fall 2018 Course Listings

TOPIC: EVALUATING FIREFIGHTER PROFICIENCY MATERIALS: PERSONAL PROTECTIVE CLOTHING AS REQUIRED FOR EACH EVOLUTION

TABLE OF CONTENTS PART 11 - FIREFIGHTING

**ALL SHADED SKILLS MUST BE SIGNED OFF BEFORE LIVE FIRE TESTING MAY OCCUR**

===============================================================

FREDERICK COUNTY/WINCHESTER FIRE AND RESCUE DEPARTMENTS BASIC FIRE ACADEMY #15 CERTIFICATION COURSE AUGUST 2015 APRIL 2016

GEORGIA DEPARTMENT OF CORRECTIONS Standard Operating Procedures IVN Authority: Effective Date: Page 1 of WETHERINGTON/HODGE 4/01/02

FIRE FIGHTER II - SKILLS PERFORMANCE SHEET

CFBT LEVEL II COURSE INFORMATION SHEET

FIRE FIGHTER II SKILL PERFORMANCE CHECK SHEETS NFPA FIRE FIGHTER II SKILL STATION MENU

Iowa s s Minimum Training Standard. How to Be Prepared?

RAPID INTERVENTION CREW (RIC) Bag

TRAINING NEEDS ASSESSMENT DRILL

FIRE FIGHTER II JPR: FFII-1A

2017 Volunteer Week - Course Descriptions

CFBT LEVEL I COURSE INFORMATION SHEET

PBCFR Reserve Battalion Combat Skills Check Off

Autumn 2018 Firefighter 1

Manhattan Fire Protection District

SUN PEAKS FIRE RESCUE

ELYRIA TOWNSHIP FIRE DEPARTMENT TRAINING COMPLEX STANDARD OPERATING PROCEDURES. Effective Date: 02/20/12 Revised: 02/12

College of Eastern Idaho. Fire Service Technology IFSAC. Firefighter Certification Program. Firefighter I

TESTING SKILLS PORTABLE FIRE EXTINGUISHERS

ROPES #1 Securing a Ladder to an Immovable Object Subject: General Section 101

Milton Hershey School

2012 SYLLABUS FOR IFE LEVEL 2 CERTIFICATE FIRE SCIENCE, OPERATIONS AND SAFETY 500/5925/7.

Protective Envelope and Foam

Alabama Smoke Diver Policies

Wilson County Emergency Management Agency 110 Oak Street Lebanon, Tennessee 37087

Industrial Fire Brigade: Interior Structural

All Candidates are required to supply their own steel toed boots. (No low angle cut style boots are permitted)

HAZARDOUS MATERIALS OPERATIONS NFPA 472, 2008 Edition

CLEARWATER FIRE ACADEMY

Township of Cumru Fire Department 03/12/2008 Standard Operating Guidelines Page: 1 of 8 Section 15.05

Combat Challenge Rules & Run Order(s)

Button style shirt and firefighting gloves are not required. (This will be a requirement in 2019.)

Alabama Fire College Rapid Intervention Crews Instructional JPR Verification Sheet

Incident Command System Classroom (4 Hours) Assignment: Read Fund. of Firefighter Skills Chapter 2 (Pages 24 41)

Idaho Fire Service Technology Fire Fighter I

Scarborough Fire Department. Personnel Protection Equipment

PINE HILL FIRE DEPARTMENT

Course Firefighter I. Unit II Safety and Orientation

TESTING SKILLS SAFETY

New Hire Physical Agility Process 2018

Rio Hondo College Basic Fire Academy Class 83 Schedule

Chapter 6 Test. Directions: Write the correct letter on the blank before each question.

FIREFIGHTER I MANIPULATIVE SKILL OBJECTIVES GENERAL

17 15 NOVA SCOTIA FIRE SERVICE TRAINING INTERIOR LEVEL (PHASE 3)

Certification Guide Fire Fighter I

CLEARWATER FIRE ACADEMY

SOUTH LYON FIRE DEPARTMENT Manual of Procedures 403

PROTECTIVE CLOTHING SOG

Enabling Objectives (EO): EO Identify certain practices that could be considered unsafe and result in injury or death.

CLEARWATER FIRE ACADEMY

ESCONDIDO FIRE DEPT TRAINING MANUAL Section Truck Module Page 1 of 8 Search and Rescue Basics Revised

CHAPTER 26 WELDING AND CUTTING

This program shall contain, as a minimum, the following components:

Turnout gear is comprised of boots, coat, pants, suspenders, hood, gloves, helmet, and SCBA Facepiece.

Vision Painting Inc Safety Management System

Policy and Procedures Manual

A PARTIAL GUIDE TO MCFRS SAFE STRUCTURAL FIREFIGHTING POLICY. Section II Rapid Intervention

ANNUAL IDOL COMPLIANCE TRAINING

12th Annual Marion County Fire School

2018 GEORGIA FIRE SERVICE CONFERENCE FIREFIGHTERS COMPETITION

Rapid Intervention Crews. 11 Skills Total

Donning Personal Protective Equipment

Performing Emergency Decontamination

FIRE FIGHTER I NFPA 1001, Chapter 5, 2013 Edition

Title: Abrasive Blasting Effective Date: 11/17/2014 Control Number: THG_0034 Revision Number: 1 Date: 10/22/2015 Annual Review Completed: 5/13/2015

GEORGIA FIREFIGHTER STANDARDS AND TRAINING FIREFIGHTER II EQUIPMENT & FACILITIES LIST

INSTRUCTOR GUIDE MATERIALS: TWO FULLY EQUIPPED PUMPERS STATIC AND PRESSURIZED WATER SOURCES

OSHA: GUIDELINES FOR EMERGENCY PREPAREDNESS AND RESPONSE

Based on NFPA 1081: Standard for Industrial Fire Brigade Member Qualifications.

20 10 SCOUT BLAST Fire Explorer Competition

Skill Sheet 17-I-2. Attack a structure fire above, below, and at ground level Interior attack. (NFPA 1001, , )

NFPA 1006 Standard on Technical Rescuer Professional Qualifications, 2013 edition Chapter 7.1 Confined Space Rescuer Level I.

Hazards of Flowing Grain & Confined Space Entry / Rescue Course Overview

COMMISSION ON FIRE PROTECTION PERSONNEL STANDARDS AND EDUCATION COMMONWEALTH OF KENTUCKY FIREFIGHTER 2 COMPETENCY EVALUATION

To establish a guideline for the safe and effective deployment of apparatus, personnel, and resources at the scene of structural fires.

CAREER OPPORTUNITY Brunswick Fire Department

6A.004 SCBA MAINTENANCE. Policy Number. Page 1 of 5 SCOPE

Protective Envelope and Foam

FIREFIGHTER II. STUDENT Task Book. Agency/Department:

FREDERICK COUNTY / WINCHESTER FIRE AND RESCUE DEPARTMENTS BASIC FIRE ACADEMY # 17 AUGUST 2017 APRIL 2018 DAY DATE LOCATION SUBJECT

Utah Fire Service Certification System FIREFIGHTER I

Focus Area Campaign for November 2014 SCBA

Rockhampton Office Brisbane Office Tarong Site. Barron Gorge Hydro PS Kareeya Hydro PS Mica Creek PS

2017 GSFA / GAFC FIREFIGHTER S COMPETITION

Cobra Cold Cut System

Magic Valley H.O.T. Academy

College of Eastern Idaho. Fire Service Technology IFSAC. Firefighter Certification Program. Hazardous Materials Operations.

PENNSYLVANIA STATE FIRE ACADEMY FIREFIGHTER I SKILL PERFORMANCE CHECKLIST. FIREFIGHTER I SKILLS MENU NFPA 1001, 2013 Edition

FIRE FIGHTER I EMERGENCY PROCEDURES WHEN USING SCBA TOPIC: TIME FRAME: 0:30. Level II LEVEL OF INSTRUCTION:

Transcription:

FRS 105 Firefighters Intermediate Skills II 45 clock hours 3 credit hours Course Title Lecture/Skill Total Fractional FRS 1051 Fire Department Organization II 4 0 4 0.3 FRS 1052 Fire Behavior II 6 0 6 0.4 FRS 1053 Personal Protective Equipment II 6 2 8 0.5 FRS 1054 Fire Hose, Appliances, & Streams II 7 3 10 0.6 FRS 1055 Ropes II 8 2 10 0.7 FRS 1056 Forcible Entry II 5 2 7 0.5 Revised: January 2009 Page 1

FRS 1051 FIRE DEPARTMENT ORGANIZATION 4 0 0.3 Includes an overview of an advanced fire department member s role within the organization and the member s responsibilities relative to the transfer of command. Prerequisites: FRS 1011 or Consent 1. Explain the Firefighter II s role as a member of the organization. 2. Explain the responsibilities of the firefighter's role in assuming and transferring command within the incident management system. Projector screen Old FRT Number: 300 / FRT 127 Revised: January 2009 Page 2

FRS 1052 FIRE BEHAVIOR 6 0 0.4 This course describes the chemistry and behavior of fire. It looks at finely divided fuel, flash point, ignition temperatures and heat sources. Prerequisites: FRS 1012 or consent 1. Define the following units of heat measurement: a. British thermal unit (BTU) b. Fahrenheit ( F) c. Celsius ( C) d. Calorie (C) 2. Define the hazard of finely divided fuels as they relate to the combustion process. 3. Define flash point, fire point, and ignition temperature. 4. Identify two chemical, mechanical and electrical energy heat sources. Old FRT Number: 305 / FRT 128 Revised: January 2009 Page 3

FRS 1053 PERSONAL PROTECTION EQUIPMENT Skill Fractional 6 2 0.5 This advanced course addresses the nomenclature, use, maintenance, and documentation relative to the personal protective equipment clothing and self-contained breathing apparatus. Prerequisites: FRS 1014 or consent None 1. Identify the function of the following articles of protective equipment: a. Helmet with eye shield; b. Hood; c. Boots; d. Gloves; e. Protective trousers; f. Protective coats; g. Self-contained breathing apparatus (SCBA); h. Personal Alert Safety System (PASS); and i. Eye protection. 2. Identify and demonstrate the care, use, inspection, maintenance, and limitations of the protective clothing and equipment. 3. Demonstrate the donning of protective equipment. 4. Identify hazardous environments that require respiratory protection. 5. Identify the physical requirements of an SCBA wearer. 6. Describe the uses and limitations of SCBA. 7. Identify each component and safety feature of the SCBA. 8. Describe the function of each component of the SCBA. 9. Assure that the SCBA is in a safe condition for immediate use. 10. Demonstrate the use of SCBA under the following condition; a. Obscured visibility, and b. Restricted passage. 11. Demonstrate the following procedures of SCBA use; a. Emergency By-Pass Valve; b. Conservation of air; c. Regulator breathing d. Maximum use of air under working conditions; and e. Cylinder replacements. 12. Demonstrate and document routine maintenance for SCBA, including inspection, cleaning, sanitizing and cylinder recharging. 13. Demonstrate rescue procedures for the following: a. A firefighter with functioning respiratory protection; b. A firefighter without functioning respiratory protection; and c. A civilian without respiratory protection. Generator lights Assorted hand and power tools Student Equipment List Personal protective equipment Old FRT Number: 315 / FRT 129 Revised: January 2009 Page 4

FRS 1054 FIRE HOSE APPLIANCES AND STREAMS 7 3 0.6 This course will cover the selection, maintenance and testing of fire hose, nozzles and appliances. Prerequisites: FRS 1033 or Consent 1. Select the proper nozzle and hose for fire attack, given three different fire situations. 2. Select adapters and appliances to be used in three specific fire ground situations. 3. Demonstrate the procedures for cleaning and maintaining fire hose, couplings and nozzles and inspecting for damage. 4. Demonstrate an annual service test for fire hose. 5. Describe and demonstrate the operation of fog and solid stream nozzle. 6. Identify the rate of water flow necessary to control fire in a room of specified volume. 7. Describe the advantages and disadvantages of solid and fog streams. Lecture Slide Projector Skills Class "A" pumper Student Equipment List Helmet with eye protection Gloves Steel toe boots Old FRT Number: 325 / FRT 130 Revised: January 2009 Page 5

FRS 1055 ROPES 8 2 0.7 This course relates to rope size, strength, type and length of rope to accomplish a firefighting or rescue task. Prerequisites: FRS 1021 or Consent 1. Select the appropriate size, strength, type and length of rope to accomplish a firefighting or rescue task requiring the use of rope. 2. Select an appropriate knot, given a firefighting or rescue task requiring the use of rope. Lecture Skills Various sizes, types and lengths of rope Assorted firefighting tools Student Equipment List Personal protective equipment Clean leather gloves Old FRT Number: 330 / FRT 131 Revised: January 2009 Page 6

FRS 1056 FORCIBLE ENTRY 5 2 0.5 This advanced course was designed to identify materials and construction features of doors, windows, walls, and door and window locking devices. The students will make forced entry through at least three different types of doors, windows, and walls. The course discusses maintenance of tools and equipment used for forced entry and safety factors involved. Prerequisites: FRS 1028 or Consent of Instructor 1. Identify materials and construction features of doors, windows, and walls and the dangers associated with forcing entry through each. 2. Force entry through at least 3 different types of each doors, windows, and walls. 3. Identify materials and construction features of door and window locking devices. 4. Identify the method and demonstrate procedures of through-the-lock entry for doors. 5. Identify methods and procedures for cleaning, maintaining, and inspecting hand tools used for forcible entry. 6. Identify and safely carry at least 1 of the following: (a) Cutting tool, (b) Prying tool, (c) Pulling tool, and (d) Striking tool. Old FRT Number: FRT 132 Revised: January 2009 Page 7