TECNICAL DATA INCLUDED IN TIS BROCURE MAY BE CANGE FROM TIME TO TIME DUE TO TE PRODUCT IMPROVEMENTS UNDERTAKES BY TE MANUFACTURER. TE COMPANY RESERVES TE UNCONDITIONAL RIGTS TO IMPLEMENT SUC CANGES WITOUT REFERENCE TO TIRD PARTIES. 6Z XIANDAI PUMP CDL/CDLF Vertical Multistage Pump ZEJIANG ADD: West Wuxing Rd, Dongou Industrial Zone, Wenzhou, Zhejiang, China TEL: + +6 77 67967 FAX: +6 77 679 E-mail:sales@xiandaipump.com xiandaipump@gmail.com ttp://www.cnxdpump.com ZEJIANG
APPLICATION CDL/CDLF pump are multi-functional products. lt can be used to convey various medium from tap water to industrial liquid at different temperature and with different flow rate and pressure. CDL type is applicable to conveying noncorrosive liquid, while CDLF is suitable for slightly corrosive liquid. Water supply: water filter and transport in waterworks, boosting of main pipeline, boosting in high rise building. Industrial boosting: process flow water system, cleaning system, high pressure washing system, fire fighting system. Industrial liquid conveying: Cooling and air-conditioning system, boiler water supply and condensing system, machine-associated purpose, acids and alkali. Water treatment: ultrafiltration system, RO system, distillation system, separator, swimming pool. Irrigation: Farmland irrigation, dripping irrigation. IDENTICATION OF PUMP MODELS CDL F - 6 Number of stages Rated flow m /h (Common type omitted) parts are of stainless steel or 6 Light vertical multistage centrifugal pump OPERATION CONDITIONS Thin,clean,non-flammable and non-explosive liquid containing no solid granules and fibers. Liquid temperature: Normal temperature type:- +7 ot water type:+7 + Ambient temperature:up to+ Altitude:up to m PUMP CDL/CDLF pump are vertical non-self priming multistage centrifugal pump, which is driven by a standard electric motor.the motor output shaft directly connects with the pump shaft through a coupling. The pressure resistant cylinder and flow passage components are fixed between pump head and in-and outlet section with tie-bar bolts. The inlet and outlet are located at the pump bottom at the same plane. This kind of pump can be equipped with an intelligent protector to effectively prevent it from dry-running,out-of-phase and overload. PUMP MOTOR Totall-enclosed fan-cooled two-pole standard motor Protection class:ip Insulation class:f Standard voltage:6z: -/6V -/6-V -/-V -77V/-V
Performance scope [m] 9 7 6 Product range Description Rated flow m /h Rated flow l/s Flow range m /h Flow range Max.pressure Motor power. 6 7 9 7 l/s bar kw Temperature range Max.efficiency % CDL CDLF CDL CDL CDL CDL6 CDL.6 -..-...- 6 CDL CDLF CDL CDLF..-9.7-..7-. 9 CDL6 CDLF6. 7-.9-.9.7- - + 6 CDL CDLF CDL CDLF 6. -6.-7..-. 66 CDL/CDLF 6z 9.9 -.-. - 76 Q[m /h] CDL.7-6.- 6.- 7 Curve description Stage First number: stage Second number: Number of small impeller. The power curve presents the input power of each stage, which is divided into integrate impeller type(/) and the type with small impeller(/) P [Mpa] [m]. -7.6 6-7-.. -6-6-...6 6.....6 6... P [p] 6 Q- [kpa] P [kw] 6. P /. P /... 6 6 [ m ] Qpm / Qpm / NPS 6 6 The Q- curve of eachstage, presenting integrate impeller type(/)and the type equipped with small inpeller(/). and frequency of pump CDL/CDLF 6z 6 6 6 6 Q[l/S] [%] 6 NPS[m] 6 Pump Q- curve,the thickened line present recommended performance region. curve means efficiency of the pump. For the pump equipped with small impeller, its efficiency will be % lower than that shown by the curve. NPS curve presents the average value of all curves of this series. A safety margin of.m shall be taken into consideration when making selection. Type CDL CDLF CDL pipe connection DIN Flange CDLF pipe connection DIN Flange Cutting ferrule joint Pipe thread DN DN DN6 DN DN DN DN DN6 DN DN Performance curve Following conditions are suitable for the performance curves shown bellow: All the performance curves are based on the measured values of a motor Curve tolerance in conformity with ISO996. V at a constant speed of rpm. Measure is done with air-free water, kinematic viscosity of m m /sec. The operation of pump shall refer to the performance region indicated by the thickened curve to prevent overheating due to too small flow rate or overload of motor due to too large flow rate.
CDL/CDLF, Exploded view CDL/CDLF,6 Exploded view
CDL/CDLF, Exploded view Parts name NO CDL/CDLF, CDL/CDLF,6 CDL/CDLF, Base frame Base frame Base frame Inlet and outlet section Inlet and outlet section Flange By-pass valve By-pass valve Snap Ring O-ring Stay bolt Inlet and outlet section Out cylinder Inducer Lower bearing housing 6 Inducer Lock nut Gasket 7 Lock nut Gland M exagon head screw Gland Impeller O-ring 9 Impeller Bearing spacing pipe Inducer Bearing chamber Bearing chamber Impeller Bearing Bearing Bearing chamber Bearing spacing pipe Chamber Intermediate bearing Chamber Impeller spacing pipe Chamber Impeller spacing pipe Shaft Stay bolt Top chamber O-ring M6 hexagon head screw 6 Shaft Out cylinder Gasket 7 Pin Top Chamber Bearing Mechanical seal Spring plate Shaft 9 Waveshape spring Mechanical seal Out cylinder Liner Liner Pump head Stay bolt Pump head Air vent valve Stay bolt nut Coupling guard Gasket Screw Screw Nameplate Coupling guard Air vent valve Coupling guard Pump head Stay bolt nut Screw 6 Air vent valve Coupling Bracket 7 Coupling exagon head screw Mechanical seal exagon head screw Pin Seal mat 9 Electric motor Adapter flange Stay bolt nut exagon head screw exagon head screw Coupling Electric motor exagon head screw Electric motor
Max inlet pressure The max. inlet pressure is shown in the table below. But the actual inlet pressure plus the valve close pressure of the pump shall be lower than the max. allowable working pressure. CDL,CDLF CDL,CDLF- CDL,CDLF-~-7 CDL,CDLF-~- CDL,CDLF CDL,CDLF- CDL,CDLF-~- CDL,CDLF-9~-6 CDL,CDLF CDL,CDLF-~- CDL,CDLF-6~- CDL,CDLF6 CDL,CDLF6- CDL,CDLF6-~6- CDL,CDLF CDL,CDLF--~-- CDL,CDLF-~-7 CDL,CDLF--~-- CDL,CDLF Max inlet pressure 6[bar] [bar] [bar] 6[bar] [bar] [bar] 6[bar] [bar] 6[bar] [bar] [bar] [bar] [bar] Max working pressure CDL,CDLF CDL,CDLF-~- CDL,CDLF-~- CDL,CDLF CDL,CDLF-~- CDL,CDLF-~-6 CDL,CDLF CDL,CDLF-~- CDL,CDLF-9~- CDL,CDLF6 CDL,CDLF6-~6-6 CDL,CDLF6-7~6- CDL,CDLF CDL,CDLF--~-- CDL,CDLF-~-9- CDL,CDLF-9~-- CDL,CDLF CDL,CDLF--~- CDL,CDLF--~-6 CDL,CDLF-7-~-7 Curve number The following figure shows the limitation of pressure and temperature which shall be kept within the region as show in the figure Minimum inlet pressure NPS In case that the pressure in pump is lower than the steam pressure used to convey liquid, the cavitations will occur. To avoid cavitations, a minimum pressure at the inlet side of the pump shall be guaranteed. The max. Suction lift in metres head can be calculated as following formula: =Pb.-NPS-f-v-s Pb =Barometric pressure in bar. (Barometric pressure can be set to bar.) In closed system, Pb indicates the system pressure in bar NPS=Net positive suction head in metres head. (It can be read out from the point of possible max flow rate shown on NPS curve) f =Friction loss in suction pipe in metres head at the highest flow the pump will be delivering. v =Vapour pressure in metres head, see fig s =Safety margin= Minimum. metres head If the calculated result is positive, the pump can operate at a suction lift of max. metres head. If the calculated result is negative, an inlet pressure of minimum metres head is required. There must be a pressure equal to the calculated during operation. Operation in parallel Connection several pumps in parallel running will be much more benefit than running a single pump. Increasing the possibility of water supply when one pump is in failure, only part of the system flow is effected. Two pumps or more can be connected in parallel running if necessary. Check and ensure that the pump is not in cavitations state CDL,CDLF--~-- CDL,CDLF-~-- CDL,CDLF-~-7 [bar] [bar] [bar]
Performance curve P [Mpa] [m].6 6.... - - - CDL/CDLF 6 z CDL,CDLF Instrallation sketch Size and weight Size(mm) B B B+B D D CDLF- 7 CDLF- 6 6 7 CDLF- 79 7 CDLF- 97 7 Weight (kg).6 6 - CDLF-6 6 7.....6. 6-9 -7-6 - - - - CDLF-7 CDLF-9 CDLF- CDLF- CDLF- 79 6 97 9 9 9 6 669 7 776 9 9 9 97 97 6 6. CDLF- 6..... P P [p][kw]...... Q- [kpa][m]............6............ Q rpm NPS......... P Q [l/s] [%] NPS [m] Performance table CDLF- CDLF- CDLF- CDLF- CDLF-6 CDLF-7 CDLF- CDLF-9 CDLF- CDLF- CDLF- CDLF- CDLF- CDLF- CDLF-6 CDLF-7 CDLF- Motor(kw)..77............... Q (m/h)..... 6 9 6 9 9 6 7 9 6 6 6 6 7 6 7 7 69 6 6 9 9 6 7 66 7 7 99 9 76 6 9 6 76 6 (m) 6 6 96 6 7 7 6 9 7 6 6 7 6 9 6 9 66 76 6 6 6 97 7 9 76 6 6 77 7 6 9 66 9 7 6 9
Performance curve P [Mpa] [m].....6.....6... 6 6 CDL/CDLF 6 z............ 6. 6. 7. 7....6......6.....6.... Q [l/s] P P [p] [Kw] [%]..6... Q- [kpa][m]............. 6. 6. 7. 7... -6 - - - - -7-6 - - - - Q rpm NPS............ 6. 6. 7. 7... P 6 NPS[m] CDL,CDLF Instrallation sketch Performance table Motor(kw) CDLF-.7 CDLF-. CDLF-. CDLF-. CDLF-6. CDLF-7. CDLF-. CDLF-9. CDLF-. CDLF-. CDLF-. CDLF-. CDLF-. CDLF-. CDLF-6. Size and weight Q (m/h).... 6. 7.. 9. 6 9 6 (m) 66 9 7 7 6 7 CDLF- CDLF- CDLF- CDLF- CDLF-6 CDLF-7 CDLF- CDLF- CDLF- CDLF- CDLF-6 9 6 7 9 7 6 69 96 6 6 7 97 9 7 7 96 67 7 9 6 7 9 7 Size(mm) B B B+B D D 6 79 6 97 6 679 9 9 9 6 6 6 669 7 7 6 9 6 7 9 6 6 7 6 7 7 9 9 9 97 97 6 6 6 6 7 9 9 9 6 6 9 7 6 7 96 Weight (kg) 7 7 6 9 6 67 7 6 9 99
Performance curve P [MPa][m]. -. -. CDL/CDLF 6z CDL,CDLF Instrallation sketch Size and weight Size(mm) B B B+B D D CDLF- CDLF- 7 7 9 9 67 677 9 9 Weight (kg) 7.6 6 - CDLF- 7 7 97 6... - -6 CDLF- CDLF-6 7 7 77 97 6 7. - CDLF- 67 997 6 77.6 6 - - CDLF- 67 7 6 7. - CDLF- 67 7 6 9. CDLF- 9...6... P P [p][kw].6... Q- [kpa] [m] 6 7 9........ 6 7 9 Q rpm NPS 6 7 9 P Q[m /h] Q[I/S] [%] Q[m /h] 6 NPS[m] Q[m /h] Performance table Motor(kw) CDLF-. CDLF-. CDLF-. CDLF-. CDLF-6. CDLF-7. CDLF-. CDLF-9 7. CDLF- 7. CDLF- 7. CDLF- 7. CDLF- CDLF- Q (m/h) (m) 7 9 7 6 7 7 7 6 6 6 9 6 7 76 7 6 6 96 9 9 79 7 6 97 9 7 6 9 96 6 7 9 6 6 9 7 7 69 6 9 9 9 7 66 6 9 79 7 6 9
Performance curve P [Mpa] [m]. -. CDL6/CDLF6 6z CDL,CDLF6 Instrallation sketch Size and weight Size(mm) B B B+B D D CDLF6-7 7 Weight (kg)..6.. 6 - -7-6 CDLF6- CDLF6- CDLF6-7 7 6 9 9 97 6 7. - CDLF6-6 69 9 7. - CDLF6-7 7 9 6.6 6 - CDLF6-7 9 7 6. - CDLF6-9 9. CDLF6-7 9. 6 6 6 Performance table............ 6. 6. 7. Q[l/S] Motor(kw) Q (m/h) 6 6 P P [p] [kw] [%] CDLF6-. 7. 7 6 7 Q- [kpa][ m ] 6 P 6 6 6 NPS[m] Q rpm 6 NPS 6 6 6 CDLF6- CDLF6- CDLF6- CDLF6-6 CDLF6-7 CDLF6- CDLF6-9 CDLF6-. 7... (m) 7 76 96 7 97 6 7 9 7 9 7 9 9 67 7 7 9 6 6 6 9 7 6 7 6 96 6 6 7 9 6 7 6 96 6 9 6 7 7
Performance curve P [Mpa] [m]..6.....6.....6... P P [p][kw] 6 Q- [kpa] [ m ] 6 6 6 6 -- -9-9- - -- -7-7- -6-6- - -- - -- - -- - -- - -- CDL/CDLF 6z 6 6 6 6 6 Q[l/S] [%] NPS[m] Qpm / Qpm / 6 6 NPS 6 6 P / P / 6 CDL,CDLF Instrallation sketch Performance table CDLF-- CDLF- CDLF-- CDLF- CDLF-- CDLF- CDLF-- CDLF- CDLF-- CDLF- CDLF-6- CDLF-6 CDLF-7- CDLF-7 CDLF-- CDLF- CDLF-9- CDLF-9 CDLF-- Motor(kw)... 7. 7.... Q (m/h) (m) Size and weight Size(mm) B B B+B D D 6 6 67 7 9 9 7 96 CDLF-- CDLF- CDLF-- CDLF- CDLF-- CDLF- CDLF-- CDLF- CDLF-- CDLF- CDLF-6- CDLF-6 CDLF-7- CDLF-7 CDLF-- CDLF- CDLF-9- CDLF-9 CDLF-- 9 6 7 9 66 76 9 6 6 6 7 7 96 9 9 6 9 6 6 7 7 6 7 9 9 96 96 7 7 7 7 67 9 6 6 9 9 7 9 7 9 9 9 9 9 9 9 9 66 66 66 66 7 6 7 9 6 6 7 9 67 79 9 6 6 69 76 9 97 6 6 6 6 9 7 7 6 6 6 7 9 6 7 6 7 9 6 66 7 9 6 9 Weight (kg) 9 7 9 7 7 7 9 69 7 6 97 7 7
Performance curve P [Mpa] [m]..6.....6.....6... P P [p][kw] 6 6..... 6 6 Q- [kpa] [ m ] Qpm / Qpm / NPS 6 6 6-7 -7- -6-6- - -- - -- - -- - -- - -- CDL/CDLF 6z 6 6 6 6 6 6 Q[l/S] [%] P / P / 6 NPS[m] 6 CDL,CDLF Instrallation sketch Performance table CDL-- CDL- CDL-- CDL- CDL-- CDL- CDL-- CDL- CDL-- CDL- CDL-6- CDL-6 CDL-7- CDL-7 Motor(kw). 7... 7 7 Q (m/h) (m) Size and weight 9 6 7 9 6 69 7 6 9 6 7 9 CDL-- CDL- CDL-- CDL- CDL-- CDL- CDL-- CDL- CDL-- CDL- CDL-6- CDL-6 CDL-7- CDL-7 7 6 66 9 6 9 69 9 B 6 6 7 7 9 9 9 9 6 6 6.. 6 7 9 6 66 9 99 6 7 B B+B D D 9 9 9 66 66 66 66 66 7 7 6 6 96 7 6 9 Size(mm) 99 99 7 7 9 6 6 6 7 7 9 6 9 7 9 6 6 6 6 6 7 6 7 6 6 7 9 7 Weight (kg) 7 6 6 6 6 6 9 67 7 9 7 9 6 9 6 7 9 7 97 7 6 7