uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure 0. MPa.0 MPa (Note ) Operating pressure differential range (Difference between tank pressure 0. to 0. MPa and line pressure) Vibration resistance (Pressure differential 0. MPa) G (9. m/sec ) or less (Note ) Min. operating flow : : 0 : 00 0 90 0 (L/min (NR)) : 0 : 0 00 owl capacity (cm (Note ) ) (apacity between levels) Recommended lubricant mbient and fluid temperature Turbine oil lass (With no additives), ISO VG ccessory () Part No. Description to 0 (No freezing) racket P -P 000 (00) Part no. LF00 LF00-0 LF00 LF00 LF00 LF900 : -P : -P 000 (00) P Note) float switch can not be mounted on - or -9 afterwards. 9000 (00) -9-IS- 9000 (000) owl material Polycarbonate Metal (Steel tubing for machine construction) Weight (kg) 0. 0....9...0. ccessory (Standard) owl guard Note ) Tank pressure is the pressure of uto Feed Tank and line pressure is the pressure of uto Feed Lube. Note ) onditions: Inlet pressure 0. MPa, drops/min, Turbine oil class (with no additives) ISO VG, Temperature 0, Needle fully open. Use air consumption rate for minimum operating flow. Note ) apacity between levels: in the case of float switch equipped model, the capacity is measured in levels between the level gauge upper limit and the lower limit of the float switch detective range. The problem of running out of oil is prevented because the oil is fed automatically. This system makes lubrication work unnecessary, thus significantly reducing the amount of maintenance labor. L00 L900 LF LD L LMU LIP EP HEP uto feed lube Piping example ir Oil Regulator Filter uto feed lube uto feed tank LF00 - Oil distributor uto feed tank 0
LF00 to 900, -/-9 Series <uto Feed Lube> LF 0 0 0 uto Feed Lube ody size 0 0 0 0 90 <uto Feed Tank> uto Feed Tank Thread Type Rc N NPT E G 0 0 0 0 0 0 Thread type Rc N NPT F G IS- Tank capacity 000 cm tank 9 9000 cm tank How to Order Working Principle/uto Feed Lube R Flow direction: Right to left Description pplicable model With bracket LF00 to 00 Metal case with X0 LF00 to 900 a level gauge R Flow direction: Left to right IS- W/float switch (ottom limit ON) IS- W/float switch (ottom limit OFF) The oil that has been pumped from the tank passes through felt q where it is filtered, and is fed into the case through nozzle w. When the volume of oil reaches a certain level, float e ascends, valve t descends via lever r, nozzle w closes, and the feeding of oil stops, thus completing the oil feeding process. When the oil inside the case is consumed, float e descends, valve t ascends via lever r, allowing oil to be fed from nozzle w. Operating Pressure Range Tank pressure (MPa) Warning aution Operating allowable range Line pressure (MPa) Precautions e sure to read this before handling the products. Refer to back page 0 for Safety Instructions and pages to 9 for Precautions on every series. Mounting If the pressure is discharged, the oil could flow back if the operating pressure differential range (the differential between the tank and line pressures) exceeds 0. MPa. Therefore, make sure to also discharge the tank pressure. Install the float vertically inside the bowl so that it will not come into contact with the siphon tube, preventing the oil from dripping poorly. Maintenance aution Tank and line pressure () () Note ) Tank pressure is removed when line pressure is stopped. Note ) Tank pressure is kept same when line pressure is stopped possible to use. Oil cannot be fed into uto Feed Lube under being pressurized. We recommend oil is supplied from cam handle (plug for oil supply) of an auto feed tank. 0
onstruction: uto Feed Lube LF00 uto Feed Lube LF00 to 900 Series uto Feed Tank -/-9 Series LF00/900 LF00/00 (The figure shows the LF00.) L00 L900 LF LD L LMU LIP EP HEP Replacement Parts No. Description Material uto feed Sight dome -/-9 q Polycarbonate LF00 LF- LF--X0 omponent Parts Material No. Description Note LF00, 00-0 LF00, 00 LF00, 900 ody luminum die-casted luminum casted Platinum silver painted Housing luminum die-casted Platinum silver painted Part no. LF00-0 LF00 LF00 LF00 LF900 LF- LF- LF- LF- LF- LF--X0 LF--X0 LF--X0 LF--X0 LF--X0 umper assembly - (0) () - (0) - 0 0 - (0) () Needle stud assembly Retainer assembly P Note) P Note) P Note) P - P Note) 0 9 0 Siphon tube assembly Sight dome seal Siphon nut seal umper retainer seal owl O-ring Housing O-ring Urethane rubber Urethane rubber NR NR NR 0 0 K00 K00 0 K00 Note ) Description: umper retainer, Material: POM Note ) Description: umper retainer, Material: luminum alloy Note ) ( ): Qty. for LF00 only onstruction: uto Feed Tank t Standard X0 r OUT (OIL) P K00 Qty. () Working principle/uto Feed Tank w y turning cam handle 90 clockwise, valve opens, allowing the air that has entered from the IN side to be introduced into the tank. Due to IN the air pressure, the oil in the tank passes through felt and exits from (IR) the OUT side. Turning cam handle 90 counterclockwise stops the air from the IN side, thus stopping the feeding of the oil. omponent Parts Part no. No. Description Material Qty. (N, E) - (N, E) --IS-, (N, E) -9 (N, E) -9-IS-, e G-0-0(, E) Pressure gauge G-P0-N0-X0(N) am handle assembly P Seal NR Siphon tube assembly Float switch IS0-, IS0-, IS0-: ottom limit ON IS0-: ottom limit OFF Note) 09
LF00 to 900, -/-9 Series Dimensions: uto Feed Lube LF00 LF00/900 D LF00/00 D LF00 LF00-0 LF00 LF00 LF00 LF900 D,,,, 0 90 00 00 00 9 9 0 9 9 Dimensions: uto Feed Tank Float switch ontact point capacity: : V, D: W ontact point construction: a, b Width across flats Lubrication plug Float switch M - --IS -9-9-IS 0 0 0 0 0 0 D E 9 9 F G H 0 0 I J K L 9 M 00
LF00 to 900, -/-9 Related Products: V- Dimensions Oil distributor V Distribution oth sides exhaust One side exhaust V - V - O.D. ø, I.D. ø V- Oil Distributor V, V Series How to Order x ø. hole R / R / Number of distribution ports (V) (V) port port port port 0 0 port port port x ø. pplicable tubing O.D. ø L00 L900 LF LD L LMU LIP EP HEP O.D. ø, I.D. ø R / R / V- V- V0- V- Number of distribution ports 0 T00. 0... 0 0 Note) Insert seal plug (PG) into the distribution port which is not used. ø Specifications Max. operating pressure urst pressure T00. MPa Refer to the burst pressure characteristics curve. Note) Min. bending radius (mm) Operating temperature 0 to 0 Material Nylon Note) The value at temp. of 0 and with O.D. variable rate 0% max. How to Order T 00 0 Nylon tubing Tube size O.D. ø I.D. ø olor W R U Y G Nylon Tubing olor lack White Red lue Yellow Green V- V- V- Length per roll 0 0 m 00 m roll 00 (lack, white only) Number of distribution ports 9... 0 0 90 ø urst Pressure haracteristics urve and Operating Pressure urst pressure (MPa) Max. operating pressure Operating temperature ( ) Maximum operating pressure is / max. of burst pressure at 0, considering the safety ratio. 0
Specialty Lubricators NLF Series uto Feed Lubricators NLF00, 00-0, 00, 00, 00, 900 Specifications uto Feed Lube NLF NLF00 NLF00-N0 NLF00 NLF00 NLF00 NLF900 M ax. supply pressure psig (MPa) 0 (.) M ax. operating pressure psig (MPa) 00 (0.) Pressure differential operating range* psig (MPa) Operating temp. range ~90 (0.~0.) 0 ~0 F R ecommended lubricant Turbine Oil # (ISO VG) owl Lubricator NLF00 Tank N- Polycarbonate M ax. supply pressure psig (MPa) 0 (.) M ax. operating pressure psig (MPa) 0 (.0) O perating temp. range ~0 F (- ~0 ) R ecommended lubricant Turbine Oil # (ISO VG) ody *etween tank and line pressure D uto Feed Lubricator NLF Series NLF00 NLF00-N0 NLF00 NLF00 NLF00 NLF900 Pipe size / / / / / -/ -/ Min. flow for oil drip scfm....... W eight lbs (kgf). (0.).9 (0.). (.0). (.).0 (.).9 (.9) owl guard (standard) racket P -P -P -P *With supply pressure of psig oil drip rate drops/min, use turbine oil # VG, Temperature F P uto Feed Tank N Series uto Feed Tank N N- N--S-* N-9 N-9-S-* N- N--IS-*~ N-9 N-9-IS-*~ P ipe size ir IN: /, OUT: / O il capacity oz (cm) 9 (000) 9 (000) 0 (9000) 0 (9000) W eight lbs (kgf). (.) 9. (.). (.0). (.) F loat switch specification* V oltage 00V 0. 00V 0. *Float switch: oth a low level switch (Float down OFF). and high level float switch is available. dd Suffix for a low level (Float down ON), for high level Return to Menu
NLF Series uto Feed Lubricators NLF00, 00-0, 00, 00, 00, 900 Specialty Lubricators How To Order Pressure haracteristics NLF 00 N0 ody size / / -/ 9 0 / 0 / 0 / 0 / 0 -/ -/ 0 None racket Tank pressure (psig) 0 90 0 0 0 0 0 0 90 00 Line pressure (psig) Dimensions/uto feed lubricator Dimensions/uto feed tank NLF00 Port Size D NLF00-N0 NLF00 NLF00 NLF00 NLF900 Oil Distributor. (0). (). (90).9 (00).9 (00).9 (00) 9.9 (.) 9.0 (.). (9.). (9.). (.). (.) Number of oil outlets. (). ().9 ().0 (). (9). () / / / / -/ Remark / -/ V oth ends V oth ends V0 0 oth ends V oth ends V One side V One side V One side Float Switch Specifications Description IS0-~ apacity : V, D: W Voltage 00V, D0V Proof Pressure psig (MPa) 0 (.) M ax. Oper. Pressure psig (MPa) 0 (.0) Media Water, Oil mbient and Fluid Temperature 0~0 F (~0 ) D E F G H I J K L LT-. (). (0). (). (). (9). (0). (9). 9 ().0 ().0 (). () LT--IS. (). (0). (). (). (9). (0). (9). 9 ().0 ().0 (). (). (9) LT-9 9. (). (0). (0). (). ().9 () 0. (). (0). (). () LT-9-IS 9. (). (0). (0). (). ().9 () 0. (). (0). (). ().9 () Return to Menu