Selection of ICF made easy Save even more time with ICF
|
|
- Sheila Esther Flynn
- 5 years ago
- Views:
Transcription
1 MAKING MODERN LIVING POSSIBLE Selection of ICF made easy Save even more time with ICF ICF stands for valve trains and for over five years installation and service has never been easier. This quick guide provides you with key information to choose the right ICF in common applications such as pumped liquid, hot gas and liquid injection lines. 50% less service time The ICF valve stations are designed to quickly and efficiently evacuate refrigerant during service calls so you can get your product COOL. 80% less installation time Keep productivity up by making two welds instead of 10 or more. Experience better functionality while lowering pressure drops. Quick Selection Guide
2 Produced by Metaphor,
3 Application Guide Approvals Technical data ICF in detail Flow through the ICF ICF overview Design work with ICF Standard applications Pumped liquid line Hot gas defrost Liquid injection to separator Accessories for ICF Produced by Metaphor, DKRCI.PA.FT0.A1.22 / 520H5093 3
4 Produced by Metaphor,
5 Application Guide The valve train of the Future since 2005 The ICF valve station is an innovative solution that provides the full functionality of a conventional valve station in a single compact unit. Eliminate project bottleneck: Conventional valve stations of six or more individual components and up to twelve welds. ICF means two welds directly at the job site Down time during service is reduced to a fraction compared to conventional valve trains. The unique design of the ICF ensures a quick pump down and faster access to valve modules. The ICF valve is a compact valve train ready for the jobsite. This solution provides you with a variety of benefits: Designed for Industrial Refrigeration Supplied fully assembled. No need to disassembly prior to installation under normal welding procedures Standard side ports to fit service valves, pressure transmitters, sight glasses. Applicable to all common non flammable refrigerants including R744 and R717. Direct Weld Connections (No leaks through flanges) Compact design, faster service Available with different connection types including ANSI and DIN, Socket weld High capacities low pressure drop Low weight design Approvals ICF valve station Nominal bore DN 25 (1 in.) DN (1¼ - 1½ ) Classified for Fluid group I Category Article 3, paragraph 3 II CRN Technical data Refrigerants Applicable to all common non flammable refrigerants including R717, R744 (CO 2 ) and non corrosive gases/liquids dependent on sealing material compatibility. For further information please refer to installation instruction for ICF. Use of the ICF control solution with flammable hydrocarbons is not recommended. For further information please contact the local Danfoss sales company. Temperature range 60/+120 C ( 76/+248 F). Ambient temperature for ICF with ICAD: 30 C/+50 C ( 22 F/122 F) Surface protection The external surface is zinc-chromated to provide corrosion protection. Additional on-site corrosion protection is recommended. Pressure The ICF is designed for: Max. working pressure: 52 bar g (754 psig) Opening differential pressure Please refer to the individual function module data. Produced by Metaphor, DKRCI.PA.FT0.A1.22 / 520H5093 5
6 Application Guide ICF in detail The innovative design of the ICF allows for a wide variety of different configurations. Many of the typical necessary configurations have been created as standard code, which makes ordering easy. See other configurations in the complete technical leaflet, DKRCI.PD.FT0 Small frame ICF 20-4 Large frame ICF 20-6 ICF (25-40)-4 ICF (25-40)-6 Flow through the ICF M5 Flow in an ICF 20-6 Flow in an ICF 20-4 M6 M2 M2 ICF overview Valve type Model (example) PS (MWP) [bar] [psig] ICF ICF ICF (25-40)-4 ICF (25-40)-6 Connection type Weight* [kg] [lbs] 20 D (3/4 ) 25 D (1 ) 32 D (1¼ ) 20 A (3/4 ) 20 SOC (3/4 ) 25 SOC (1 ) 32 SOC (1¼ ) D (3/4 ) 25 D (1 ) 32 D (1¼ ) 20 A (3/4 ) 20 SOC (3/4 ) 25 SOC (1 ) 32 SOC (1¼ ) D (1 ) 32 D (1¼ ) 40 D (1½ ) 32 A (1¼ ) 25 SOC (1 ) 32 SOC (1¼ ) 40 SOC (1½ ) D (1 ) 32 D (1¼ ) 40 D (1½ ) 32 A (1¼ ) 25 SOC (1 ) 32 SOC (1¼ ) 40 SOC (1½ ) * Without modules 6 DKRCI.PA.FT0.A1.22 / 520H5093 Produced by Metaphor,
7 Application Guide The following module configurations are possible: Function Module Type Can be installed in these locations ICFS Stop valve module M2 ICFR Manual regulating valve module M2 ICFF Filter (strainer) module M2 ICFE Solenoid valve module ICFC Check valve module ICFN Stop/check valve module ICM Motor valve module ICFB Blank top cover M2 ICFA Electronic expansion valve module (for ICF 20 only) ICFE20H Solenoid valve module (for ICF 20 only) ICFO Manual opening module ICFW Welding module (for ICF only) M2 Module locations are indicated by, M2,,, M5 and M6. With respect to refrigerant flow, is closest to inlet. All ICF (20-40)-6 DIN and ANSI connections with 4 side ports All ICF (20-40)-6 SOC connections with 6 side ports Example: ICF A DIN Example: ICF H SOC All ICF (20-40)-4 DIN and ANSI connections with 2 side ports All ICF (20-40)-4 SOC connections with 4 side ports Example: ICF DIN Example: ICF SOC Produced by Metaphor, DKRCI.PA.FT0.A1.22 / 520H5093 M5 M5 M6 M6 M6 M6 M6 M5 M5 M5 M5 M5 M6 M6 7
8 Application Guide Design work with ICF When designing with ICF, Danfoss provides engineering tools that simplifies the design phase. CoolSelector Sizing through CoolSelector provides fast and accurate selection while obtaining performance information based on operating conditions. All standard configuration are available in the software. However, custom configurations of the ICF is possible. Contact you local representative for availability. CAD symbols 2D & 3D When designing new units and applications, CAD drawings are essential for getting the job done as precisely and easily as possible. Danfoss provides low file-size CAD symbols for all standard ICF code. These CAD symbols make it easy for all design engineers to make quick and compact designs. Visit to explore more about the product and CAD symbols. 8 DKRCI.PA.FT0.A1.22 / 520H5093 Produced by Metaphor,
9 Application Guide Standard applications ICF is recommended for use in the following standard applications: Pumped liquid line. Hot gas defrost. Liquid injection to separator (Liquid make up). Compressor liquid injection. Low temperature evaporator To liquid separator From discharge line PMLX/GPLX CVP ICF ICS From liquid separator ICF Liquid injection (Liquid make up) EKC 347 AKS 41 From receiver Liquid separator ICF A Produced by Metaphor, DKRCI.PA.FT0.A1.22 / 520H5093 9
10 Application Guide Pumped liquid line The ICF and ICF (25-40)-6-3 are designed for a typical pumped liquid line in a flooded evaporator system. The ICF valve station consists of the following modules: ICF ICF(25-40)-6-3 ICFS (Stop valve) ICFS (Stop valve) M2 ICFF (Filter) ICFF (Filter) ICFE (Solenoid valve) ICFE (Solenoid valve) ICFO (Manual opener for ICFE) ICFC (Check valve) M5 ICFR (Regulation valve) ICFR (Regulation valve) M6 ICFN (Stop/Check valve) ICFS (Stop valve) ICF For loads exceeding, the ICF is available with a high capacity solenoid valve, the ICFE 20H. With this configuration the ICF is called ICF H. For loads exceeding the suitable level for the ICF H please use the ICF (25-40)-6-3. Capacities Maximum recommend capacities according to following conditions Refrigerant: NH 3, R717 T e : -30 C / -20 F Circulation rate: 3:1 Model: Capacity* [KW] Capacity* [TR] Connection[DN] Connection [ANSI] ICF ¾ ICF " ICF H " ICF H ¼ ICF A " ICF B ¼ ICF B ½ Maximum recommendable capacity. Pipe velocity (1 m/s / 3.28 ft/s)) used as dimensioning factor together with the pressure drop across the solenoid valve. Capacity based on approximate pressure drop of 0.2 barg / 4 psig. Capacity variations are minimal at other evaporating temperatures. Ordering ICF 20-6 ICF ICF20-6-2H Connection Side ports [*] Code Code 20D ( 3 / 4 in.) 4 027L D (1 in.) 4 027L L D (1¼ in.) 4 027L L A ( 3 / 4 in.) 4 027L SOC ( 3 / 4 in.) 1 ) 6 027L SOC (1 in.) 1 ) 7 027L L SOC (1¼ in.) 1 ) 7 027L L3313 ICF (25-40)-6 ICF25-6-3A ICF32-6-3B ICF40-6-3B Connection Side ports [*] Code Code Code 25 D (1 in.) 4 027L SOC (1 in.) 1 ) 7 027L D (1¼ in.) 4 027L SOC (1¼ in.) 1 ) 7 027L D (1½ in.) 4 027L SOC (1½ in.) 1 ) 7 027L4035 * Four side ports include four blind plugs and one ½ in. connector. Side ports in P2/P7 and P5/P10. Side ports are 3 / 8 G for butt weld connection or 3 / 8 NPT for socket weld connection. 1 ) Especially for the North American market 10 DKRCI.PA.FT0.A1.22 / 520H5093 Produced by Metaphor,
11 Application Guide Hot gas defrost The ICF and ICF (25-40)-4-9 are designed to provide the necessary functions for hot gas defrost on evaporators. The ICF consist of the following modules: ICF ICF(25-40)-4-9 ICFS (Stop valve) ICFS (Stop valve) M2 ICFF (Filter) ICFF (Filter) ICFE (Solenoid valve) ICFE (Solenoid valve) ICFS (Stop valve) ICFS (Stop valve) ICF For loads exceeding, the ICF is available with a high capacity solenoid valve, the ICFE 20H. With this configuration the ICF is called "ICF H". For loads exceeding the suitable level for the ICF H, please use the ICF (25-40)-4-9. Capacities Maximum recommend capacities according to following conditions: Refrigerant: NH 3, R717 T e : -30 C / -20 F T c : 30 C / 86 F Subcooling: 0 C / 0 F Superheat: 0 C / 0 F Model: Capacity* [KW] Capacity* [TR] Connection[DN] Connection [ANSI] ICF " ICF ¼ ICF H " ICF H ¼ ICF " ICF ¼ ICF ½ * Maximum recommendable capacity. Pipe velocity (15 m/s) used as dimensioning factor together with the pressure drop across the solenoid valve. ** If needed the ICF 20-4 and ICF(25-40)-4 can be delivered with a regulation valve (HEV) in instead of the stop valve, by using the standard configuration ICF or ICF(25-40)-4-10 Ordering ICF 20-4 ICF ICF20-4-9H Connection Side ports [*] Code Code 25D (1 in.) 2 027L L D (1¼ in.) 2 027L L A ( 3 / 4 in.) 2 027L SOC (1 in.) 1 ) 4 027L SOC (1¼ in.) 1 ) 4 027L3337 ICF (25-40)-4 ICF ICF ICF Connection Side ports [*] Code Code Code 25 D (1 in.) 2 027L SOC (1 in.) 1 ) 4 027L D (1¼ in.) 2 027L SOC (1¼ in.) 1 ) 4 027L D (1½ in.) 2 027L SOC (1½ in.) 1 ) 4 027L4073 * Four side ports include four blind plugs and one ½ in. connector. Side ports in P2/P7 and P5/P10. Side ports are 3 / 8 G for butt weld connection or 3 / 8 NPT for socket weld connection. 1 ) Especially for the North American market Produced by Metaphor, DKRCI.PA.FT0.A1.22 / 520H
12 Application Guide Liquid injection to separator (Liquid make up) The ICF valve station offers a unique solution for liquid injection to separator. For this application the ICF (20-40)-6-5 is recommended. Using the ICF (20-40)-6-5 the valve provides you with an advanced ICM motor control valve with a solenoid in front. It is delivered with a sight glass in the side port of the valve housing. For fail safe operation this type of ICF is equipped with a ICFE solenoid valve in front of the ICM motor operated valve. The ICF consist of the following modules: ICF ICF(25-40)-6-5 ICFS (Stop valve) ICFS (Stop valve) M2 ICFF (Filter) ICFF (Filter) ICFE (Solenoid valve) ICFE (Solenoid valve) ICFO (Man. opener for ICFE) ICFB (Blank top cover) M5 ICM (Elect. motor valve) ICM (Elect. motor valve) M6 ICFS (Stop valve) ICFS (Stop valve) ICF The ICF is available in versions A, B and C, referring to the capacity of the electronic motor valve. ICF (25-40)-6-5 is available in version A. Capacities Maximum recommend capacities according to following conditions: Refrigerant: NH 3, R717 T e : -20 C / -4 F T c : 30 C / 86 F Subcooling: 5 C / 9 F Superheat: 0 C / 0 F Model: Capacity* [KW] Capacity* [TR] Connection[DN] Connection [ANSI] ICF A ¾" ICF AH " ICF BH " ICF CH ¼" ICF A " ICF A ¼ * Maximum recommendable capacity. Pipe velocity (1 m/s) used as dimensioning factor together with the pressure drop across the solenoid valve. Note: For larger capacities use larger individual weld-in components such as SVA, FIA,ICS,ICM,SVA. Ordering ICF 20-6 ICF20-6-5A ICF20-6-5AH ICF20-6-5B ICF20-6-5BH ICF20-6-5C ICF20-6-5CH Connection Side ports [*] Code 20D ( 3 / 4 in.) 4 027L3034 Code Code Code Code Code 25D (1 in.) 4 027L L L L L L D (1¼ in.) 4 027L L A ( 3 / 4 in.) 4 027L L SOC ( 3 / 4 in.) 1 ) 6 027L L SOC (1 in.) 1 ) 6 027L L L L L L SOC (1¼ in.) 1 ) 6 027L L3331 ICF (25-40)-6 ICF25-6-5A ICF32-6-5A ICF A Connection Side ports [*] Code 25 D (1 in.) 4 027L SOC (1 in.) 1 ) 6 027L4039 Code Code 32 D (1 in.) 4 027L L SOC (1¼ in.) 1 ) 6 027L L D (1½ in.) 4 027L4148 * Four side ports include four blind plugs and one ½ in. connector. Side ports in P2/P7 and P5/P10. Six side ports include six blind plugs. Side ports in P2/P7, P4/P9 and P5/P10. Side ports are 3 / 8 G for butt weld connection or 3 / 8 NPT for socket weld connection. 1 ) Especially for the North American market 12 DKRCI.PA.FT0.A1.22 / 520H5093 Produced by Metaphor,
13 Application Guide Accessories for ICF u w y v x u ICAD actuator ICAD 600 With 1,5m cable 027H9065 v Stop needle valves SNV-ST G½ (Qty. 1) 148B3778 ICAD 600 Without cables 027H9100 SNV-ST 3 / 8 " NPT-FPT Other SNV types see literature: DKRCI.PD.KB0.A 148B4181 Cable Cable set 10 m. 027H0427 Cable Cable set 15 m. 027H0435 Connector Connector set female 027H0430 Protection cap Protection cap for ICAD 027H0431 ICAD details see literature: DKRCI.PD.HT0.A w Coils Coils 10 W 21 VA with terminal box IP V 50 Hz 018F V 60 Hz 018F6813 Other coil types see literature: DKRCI.PD.FT0.A x Sight glass and connector Sight glass G 3 / 8 (Qty. 2) 027L1267 (for DIN and ANSI connections only) v Pressure transmitters AKS 33 G 3 / 8 (Qty. 1) LP -1 to 12 bar (-30 to 40 C) 060G2105 Sight glass NPT 3 / 8 (Qty. 2) 027L1268 (for SOC connection only) AKS 33 G 3 / 8 (Qty. 1) HP 0 to 25 bar (0 to 80 C) 060G2115 Connector G 3 / 8 G½ (Qty. 2) 027L1266 (for DIN and ANSI connections only) AKS 33 1 / 4 " NPT (Qty. 1) psia ( F) 060G3802 Additional spare parts see literature: DKRCI.PY.FT0.A AKS 33 1 / 4 " NPT (Qty. 1) psia ( F) 060G1711 y Gaskets for ICF Complete set of gaskets ICF20 Complete set of gaskets ICF L L2260 Other AKS 33 types see literature: RD5GH Produced by Metaphor, DKRCI.PA.FT0.A1.22 / 520H
14 Produced by Metaphor,
15 Produced by Metaphor,
16 MAKING MODERN LIVING POSSIBLE Danfoss Industrial Refrigeration Your One-Stop-Shop We have more than 60 years of experience producing valves and controllers for Industrial Refrigeration and we focus on our core business of making quality products that enhance performance and reduce total life cycle costs the key to major savings. Some of the products from our very extensive product range: ICF Control Solution ICV Control Valves Liquid Level Controls Line Components Stop and Regulating Valves Safety Relief Valves For further information; please visit our web site We also offer a wide range of products for CO 2. All our products are designed and tested to ensure that they can withstand the impact of CO 2 in all aspects. Please visit 16 DKRCI.PA.FT0.A1.22 / 520H5093 Produced by Metaphor,
Capacities Valve Station, type ICF 15, 20, 25
Data sheet Capacities Valve Station, type ICF 15, 20, 25 Based on advanced technology the ICF valve station incorporates several functions in one housing, which can replace a series of conventional mechanical,
More informationValve station ICF 15, ICF 20, ICF 25, ICF 50 and ICF 65
Data sheet Valve station ICF 15, ICF 20, ICF 25, ICF 50 and ICF 65 Based on advanced technology the ICF valve station incorporates several functions in one housing, which can replace a series of conventional
More informationInstructions. Control Solution ICF 20-4, ICF 25-4, ICF ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position.
027R9782 Instructions Control Solution ICF 20-4, ICF 25-4, ICF 32-4. ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and position ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 with ICM ICM 027R9782
More information80% Less installation time with just two welds for fast and efficient installation.
The smarter, faster route to Installation and service The ICF Valve Station - member of the Flexline family. The unique ICF Flexline valve station allows you to substitute your traditional valve train
More informationInstructions. Control Solution ICF 20-4, ICF 25-4, ICF ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and Position.
027R9789 Instructions Control Solution ICF 20-4, ICF 25-4, ICF 32-4. ICF 40-4, ICF 20-6, ICF 25-6, ICF 32-6, ICF 40-6, Direction and Position ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 with ICM 027R9789 Fig.
More informationValve Station ICF 15, 20 and 25
Installation Guide Valve Station ICF 15, 20 and 25 027R9782 Installation ICF xx-4 ICF xx-6 ICF xx-4 / ICF xx-6 + 027R9782 1a 1b 1c Welding TIG/MIG/SMAW Gas welding Danfoss M27L0049_1 2 3 Danfoss A/S (RC-MDP/MWA),
More information80% Less installation time with just two welds for fast and efficient installation.
The smarter, faster route to Installation and service The ICF Valve Station - member of the Flexline family. The unique ICF Flexline valve station allows you to substitute your traditional valve train
More information36% higher capacity than market alternatives. New ICF 50-4 and ICF 65-3: A great valve family just got greater.
New ICF 50-4 and ICF 65-3: A great valve family just got greater Danfoss extends its successful ICF Flexline valve range to include DN 50 and DN 65 sized ICF valves for industrial refrigeration systems
More informationSolenoid Valves, one - or two step, on/off ICLX
MAKING MODERN LIVING POSSIBLE Technical brochure Solenoid Valves, one - or two step, on/off ICLX 32-150 ICLX servo valves belong to the ICV (Industrial Control Valve) family. ICLX are used in suction lines
More informationDual position solenoid valve Type ICSH 25-80
Data sheet Dual position solenoid valve Type ICSH 25-80 ICSH dual position solenoid valve belongs to the ICV family and consists of an ICV housing, an ICS insert together with an ICSH top cover with 2
More informationPilot valves for pilot operated servo valves
Data sheet Pilot valves for pilot operated servo valves The range of pilot valves consists of: Constant-pressure pilot valve, type CVP (LP) and CVP (HP) Differential-pressure pilot valve, type CVPP (LP)
More information2-step solenoid valve Type ICLX
Data sheet 2-step solenoid valve ICLX 32-150 ICLX 2-step solenoid valves belong to the ICV family. ICLX are used in suction lines to open against high differential pressure, e.g. after a hot gas defrost
More information2-step solenoid valve Type ICLX
Data sheet 2-step solenoid valve ICLX 32-150 ICLX 2-step solenoid valves belong to the ICV family. ICLX are used in suction lines for the opening against high differential pressure, e.g. after hot gas
More informationSolenoid valves, two-step on/off Type PMLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Solenoid valves, two-step on/off PMLX REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
More informationGas powered stop valves, type GPLX REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Gas powered stop valves, type GPLX 80-150 REFRIGERATION AND AIR CONDITIONING Technical leaflet Technical leaflet Gas powered stop valves, type GPLX 80-150 Contents Page Introduction........................................................................................3
More informationOverflow valves Type OFV REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction....................................................................................... 3 Features...........................................................................................
More informationEvaporating Pressure Regulating Valve Type KVQ REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Evaporating Pressure Regulating Valve Type KVQ REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction...3 Features...3 Technical data...4 Ordering...4 Sizing...5 Valve selection...5
More informationModulating liquid level regulators, servo-controlled PMFL / PMFH and SV
MAKING MODERN LIVING POSSIBLE Technical brochure Modulating liquid level regulators, servo-controlled / PMFH and SV For modulating liquid level control in refrigeration, freezing and air conditioning plant,
More informationOverflow valves Type OFV Type OFV-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Overflow valves Type OFV 20-25 Type OFV-SS 20-25 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction.......................................................................................
More informationElectric regulating valves Type CCMT 2 - CCMT 8 / CCMT 16 - CCMT 42
Data sheet Electric regulating valves Type CCMT 2 - CCMT 8 / CCMT 16 - CCMT 42 The CCMT is an electrically operated valve designed specifically for operation in CO 2 systems. The CCMT valve concept is
More informationFloat valves Types SV 4, SV 5 and SV 6
Data sheet Float valves Types SV 4, SV 5 and SV 6 SV 4-6 are for use on the low pressure side as modulating liquid level regulators in refrigeration, freezing and air conditioning systems with ammonia
More informationDANFOSS VALVE CONFIGURATIONS BULLETIN DC-SB14-02
DANFOSS VALVE CONFIGURATIONS BULLETIN DC-SB14-02 VALVES VESSELS SSTEMS CONTROLS SERVICE BULLETIN This publication is intended as a reference guide to assist customers in configuring and ordering some common
More informationLiquid level regulating valves Types PMFL / PMFH and SV
Data sheet Liquid level regulating valves Types / PMFH and SV For modulating liquid level control in refrigeration, freezing and air conditioning plant, a system comprising a liquid level regulating valve
More informationPressure regulating valves Types OFV, OFV-SS
Data sheet Pressure regulating valves Types OFV, OFV-SS OFV are angle-way pressure regulating valves, which have ajustable opening pressure and cover the differential pressure range ( P): 2-8 bar (29 116
More informationShut-off Liquid level and regulating valves for for Industrial Refrigeration
Catalogue Shut-off Liquid level and regulating valves for for Industrial Refrigeration Contents Page Float valve, type HFI... 3 Float valves, types SV 1 and 3... 17 Float valves, types SV 4, SV 5 and SV
More informationElectric expansion valves Types AKV 10, AKV 15 and AKV 20
Data sheet Electric expansion valves Types AKV 10, AKV 15 and AKV 20 AKV are electrically operated expansion valves designed for refrigerating plants. The AKV valves are normally controlled by a controller
More informationModulating liquid level regulators, direct-controlled, type SV 1 and 3 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Modulating liquid level regulators, direct-controlled, type SV 1 and 3 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction...3 Technical data...3 Approvals...3 Identification...3
More informationFloat valves Types SV 1 and SV 3
Data sheet Float valves s SV 1 and SV 3 The SV 1 and 3 can be used separately as a modulating liquid level regulator in refrigerating, freezing and air conditioning systems for ammonia or fluorinated refrigerants.
More informationRegulating valves Type REG 6-65 Type REG-SS REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Regulating valves Type REG 6-65 Type REG-SS 15-40 REFRIGERATION AND AIR CONDITIONING Technical leaflet Content Page Introduction........................................................................................3
More informationLiquid level glasses, type LLG REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Liquid level glasses, type LLG 185-1550 REFRIGERATION AND AIR CONDITIONING Technical leaflet Introduction LLG are liquid level glasses in ductile steel which meets the strictest requirements on industrial
More informationRegulating valves REG-SA and REG-SB
MAKING MODERN LIVING POSSIBLE Technical brochure Regulating valves REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand regulating valves, which act as normal stop valves in closed position.
More informationSolenoid valve type EVR for Hydrocarbons
MAKING MODERN LIVING POSSIBLE Technical brochure Solenoid valve type EVR for Hydrocarbons EVR for Hydrocarbons is a direct or servo operated solenoid valve especially designed for liquid, suction, and
More informationCapacity regulator (hot gas bypass)
MAKING MODERN LIVING POSSIBLE Capacity regulator (hot gas bypass) TUH/TCHE/ Technical brochure Contents Page Introduction........................................................................................3
More informationHand operated regulating valves Types REG-SA and REG-SB
Data sheet Hand operated regulating valves Types REG-SA and REG-SB REG-SA and REG-SB are angleway and straightway hand operated regulating valves, which act as normal shut-off valves in closed position.
More informationCapacity regulator (hot gas bypass), type TUH/TCHE/TRHE REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Capacity regulator (hot gas bypass), type TUH/TCHE/ REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction........................................................................................3
More informationIndustrial Refrigeration Control Valves. Catalog C12-PVS Parker Valve Station (PVS) Sizing Guide
Industrial Refrigeration Control Valves Catalog C1-PVS Parker Valve Station (PVS) Sizing Guide PVS Sizing Guide PVS Suction Capacities (Tons) Pressure Regulators R-717 Evap Temp, F Evap Press PSI 0 F 74.
More informationTechnical leaflet. Pressure and Temperature Regulators. January 1999 RC.4X.B1.22. Danfoss A/S
Technical leaflet Pressure and Temperature Regulators January 1999 RC.4X.B1.22 Danfoss A/S 01-99 1 Pressure and Temperature Regulators Contents Evaporator Pressure Regulators Page Type KVP... 3 Type PKV/PKVS...
More informationMAKING MODERN LIVING POSSIBLE. Pilot operated internal safety valves type POV REFRIGERATION AND AIR CONDITIONING DIVISION.
MAKING MODERN LIVING POSSIBLE Pilot operated internal safety valves type POV REFRIGERATION AND AIR CONDITIONING DIVISION Technical leaflet Contents Page Introduction...3 Features...3 Design...4 Technical
More informationNugget 120 V14 Series
Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus
More informationCrankcase pressure regulator, type KVL REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Crankcase pressure regulator, type KVL REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction.......................................................................................
More information2/2-Way Solenoid Control Valve
2/2-Way Solenoid Control Valve Excellent range (1:200) Very good response Compact valve design Orifice sizes 0.05... 2.0 mm Port connection 1/8 or sub-base Type 2871 can be combined with Type 8605 Digital
More informationNugget 120 V14 Series
Nugget 0 V Series /2 & /3 Valves Solenoid and Pilot Operated G 1 4 High flow compact valves Sub-base and low profile manifolds Light weight, long life corrosion resistant materials Multipole and Fieldbus
More informationSemi-Hermetic compact screw compressors
CX Series Frascold CX compact screw compressors range has been designed to grant the maximum efficiency, reliability and flexibility. Currently the range consists of 566 models, which cover not only a
More informationCondensing pressure regulator, type KVR Differential pressure valve, type NRD
MAKING MODERN LIVING POSSIBLE Data sheet Condensing pressure regulator, type KVR Differential pressure valve, type NRD The condensing pressure regulator, type KVR can be mounted in either the gas or liquid
More informationSPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection
SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces
More informationBall Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65
Data Sheet 819346-02 Issue Date: 05/17 Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300, 50, 65 UNA 45hl MAX, UNA 46hl MAX, UNA 46Ahl MAX UNA 45v MAX with cover for mounting electrode
More informationReliable System Performance PM valves
MAKING MODERN LIVING POSSIBLE Service manual Reliable System Performance PM valves Danfoss components are designed to give a high level of performance over an extended operating life. When Danfoss develops
More informationHand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS
Data sheet Hand-operated regulating valves in stainless steel Types REG-SA SS and REG-SB SS In certain specific areas such as outdoor applications and corrosive atmospheres, such as coastal installations,
More informationQuick closing oil drain valve, type QDV 15 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Quick closing oil drain valve, type QDV 15 REFRIGERATION AND AIR CONDITIONING Technical leaflet Introduction QDV is a quick closing oil drain valve, designed particularly for draining oil from systems
More informationLeak-Free Load-Control Valve SAE ½ psi flange
Leak-Free Load-Control Valve SE ½ - 6000 psi flange Q max = 150 l/min [40 gpm], p max = 420 bar [6000 psi] leak-proof, two-stage hydraulic, SE-flange design 12--S... 1 Description Two-stage load-control
More informationCROT-6 CROT-10 CRO-4. for Compressor Overload Protection
May 2010 / RACE Catalogue 90-10 UK for Compressor Overload Protection CROT-6 Listed and y Certified 400 psig Maximum Rated Pressure CROT-10 Listed and Certified 400 psig Maximum Rated Pressure CRO-4 Recognized
More informationWaterSource Heat Pump Hose Kit Performance Specification-Summary
WaterSource Heat Pump Hose Kit Performance Specification-Summary AUTOMATIC & MANUAL BALANCING HOSE KITS Contractor shall provide and install Hays Hose Kits. Each kit, shall include a Hays 2500 Series Mesurflo
More informationCVI Valve Line. Exceeds the industry s highest standards for reliability and performance
CVI Valve Line Exceeds the industry s highest standards for reliability and performance Available in the most standard models with the shortest lead times in the industry Exceptional quality every CVI
More informationPressure Equipment Directive (PED) 97/23/EC Page 033 of 124
Pressure Equipment Directive (PED) 97/23/EC Page 033 of 124 13.7 Pressure Equipment Directive (PED) 97/23/EC 1 The Pressure Equipment Directive (PED) 97/23/EC applies to the design, manufacturing and conformity
More informationDirect Operated Precision Regulator Modular Style. Standard Specifications
1 Direct Operated Precision Regulator Modular Style Series P3 Courtesy of Steven Engineering, Inc.-23 Ryan Way, South San Francisco, CA 948-637-Main Office: (65) 588-92-Outside Local Area: (8) 258-92-www.stevenengineering.com
More informationRefrigeration and Air Conditioning Technical leaflet
Refrigeration and Air Conditioning Technical leaflet Technical leaflet Injection valve type 2 Introduction Danfoss has developed a injection valve type 2 for desuperheating in 2-stage refrigeration systems
More informationTightness controls TC 1 3 and TC 4
Tightness controls TC 1 3 and TC 4 Test of both safety valves Short test period thanks to logical decision-making in the program sequence Adjustable test period which can be adapted to different systems
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 9 ACCUMULATORS The material needed for outcome 2 is very extensive so there are
More informationProportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description proportional pressure-relief valves are direct acting
More informationGM Series Dual-Block Multi-Function Gas Control Valves
Installation Sheets Manual 121 Gas Combustion Combination Controls and Systems Section G Technical Bulletin GM Issue Date 0297 GM Series Dual-Block Multi-Function Gas Control Valves Figure 1: GM Series
More informationWater valve Type WVO. Data sheet MAKING MODERN LIVING POSSIBLE
MAKING MODERN LIVING POSSIBLE Data sheet Water valve Type WVO Water valve type WVO is used for regulating the flow of water in refrigeration plant with water-cooled condensers. The water valve gives modulating
More informationDual Modular Safety Shutoff Valves DMV-D 525/11 DMV-DLE 525/11
Dual Modular Safety Shutoff Valves DMV-D 525/11 DMV-DLE 525/11 Two normally closed safety shutoff valves in one housing; each with the following approvals. CSA Certified ANSI Z21.21 CSA 6.5 Marked C/I
More informationSafety relief valves SFV 20-25
MAKING MODERN LIVING POSSIBLE Technical brochure Safety relief valves SFV 20-25 www.danfoss.com/ir Contents Page Introduction........................................................................................3
More informationSolenoid valves VZWF, force pilot operated
Key features and overview Function Normally closed solenoid valve with diaphragm and forced lifting. When the solenoid is energised, the differential pressure from the secondary side of the diaphragm is
More informationInverse Prop. Pressure-Relief Cart., Size 2 4
Inverse Prop. Pressure-Relief Cart., Size Q max = l/min (6 gpm), p max = bar (58 psi) Direct acting, electrically operated Description inverse proportional pressure-relief valves are direct acting screw-in
More informationStandard Specifications
NARM, 2 Ways of Connection Small Size Pressure Gauge ø5mm Reverse flow function available on the standard model Space Saving -B2 NARM-6A-NG Standard Specifications Fluid Proof pressure psig (MPa) Max.
More informationSales Office: Danfoss Expansion Valves. T*2 Range Order valve and orifice separately Range N -40 C to +10 C Without MOP
Danfoss Expansion Valves T*2 Range Order valve and orifice separately Range N -40 C to +10 C Without MOP Code Model Connections Danfoss No Internally Equalised F500 TX2 R22 3/8 x 1/2 flare 068Z3206 F502
More informationSafety relief valves, type BSV 8 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves, type BSV 8 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction....................................................................................... 3
More information94270 Vapor Guard Tank Blanketing Valve Vapor Guard Tank Blanketing Valve What is Tank Blanketing? Features How does it work?
94270 What is Tank Blanketing? blanketing systems are used to prevent the escape of liquid vapors into the atmosphere or to prevent moisture from entering a tank and contaminating its contents. A tank
More informationMV-01. Features. 2/2-way Solenoid Valve for Fluids. Description: Application:
MV-01 2/2-way Solenoid Valve for Fluids Description: Features / Nominal diameters 1/4-2 / Pressure up to 10 bar / 24 V DC and all common AC variants / Forced-lifting The pilot-controlled full-way valve
More informationTechnology issues regarding Blends of Refrigerants Buffalo Research Laboratory
Technology issues regarding Blends of Refrigerants Buffalo Research Laboratory Agenda Basic Characteristics Background Degree of Superheat, degree of subcooling, average coil temperature Handling and setting
More informationSimple Set Max. Pressure Independent Control Valves 2 Way 2-1/ /09/18
The Bray Simple Set Max is a flanged pressure independent control (PIC) valve designed for a wide variety of hot water and chilled water control applications. The SSM Series combines high rangeability
More informationTECHNICAL DATA Q= C. Table 1 - Specifications
September 25, 2013 Pressure Regulation 537a 1. Description The Model B-3 Pilot Operated Pressure Control Valve is a factory assembled unit. The unit consists of a Model J-2 Halar coated Flow Control Valve,
More informationData sheet Pressure switch type CS December 2001 DKACT.PD.P10.A B1119
Pressure switch type CS December 2001 DKACT.PD.P10.A2.02 520B1119 Introduction Pressure switch type CS is part of the Danfoss pressure control range. All CS pressure switches have a built-in pressure-operated,
More informationDual Safety Shutoff Valves with Proof of Closure and NEMA 4x Enclosure. DMV-D/624L Series DMV-DLE/624L Series
Dual Safety Shutoff Valves with Proof of Closure and NEMA 4x Enclosure DMV-D/624L Series DMV-DLE/624L Series Two normally closed automatic shutoff valves in one housing. Valve 2 (V2) incorporates proof
More informationANDERSON GREENWOOD TANK BLANKETING REGULATORS
Part of a complete system that incorporates a pilot operated, dome-loaded diaphragm type regulator capable of reducing blanketing gas in a single step, providing bubble-tight shut-off and low maintenance.
More information2/2-Way Proportional Valve (motor-driven)
2/2-Way Proportional Valve (motor-driven) Type 3280 can be combined with Seat valve with stepper motor - actuator isolated from flow path Excellent range (1:100) Low power consumption Fast response Orifice
More informationDual Modular Safety Shutoff Valves. DMV-D/602 Series DMV-DLE/602 Series
Dual Modular Safety Shutoff Valves DMV-D/602 Series DMV-DLE/602 Series Two normally closed safety shutoff valves in one housing; each with the following approvals. UL Recognized UL 429 File # MH16727 CSA
More informationFLUID POWER FLUID POWER EQUIPMENT TUTORIAL ACCUMULATORS. This work covers part of outcome 2 of the Edexcel standard module:
FLUID POWER FLUID POWER EQUIPMENT TUTORIAL ACCUMULATORS This work covers part of outcome 2 of the Edexcel standard module: UNIT 21746P APPLIED PNEUMATICS AND HYDRAULICS The material needed for outcome
More informationDual Modular Safety Shutoff Valves. DMV-D/11 Series DMV-DLE/11 Series
Dual Modular Safety Shutoff Valves DMV-D/11 Series DMV-DLE/11 Series Two normally closed safety shutoff valves in one housing; each with the following approvals. CSA Certified ANSI Z21.21 CSA 6.5 Marked
More informationTECHNICAL DATA. Table 1 - Specifications
Page 1 of 6 1. DESCRIPTION Model A-3 Pilot Operated Pressure Control Valves are factory assembled units. Each unit consists of a Model H-2 Halar coated Flow Control Valve, a Speed Control Valve, a Model
More informationSERIES 30. Spring Operated Tank Blanketing Valve PROTECTOSEAL.
SERIES 30 PROTECTOSEAL 1 2" NPT inlet and outlet standard Direct acting valve mechanism Optional flanged or threaded inlet and outlet connections available Inlet gas pressures from 10 PSIG to 200 PSIG
More informationGENO -Flushing Compressor Product Data Sheet F 02
GENO -flushing compressor 1988 K Fig. 1: GENO -flushing compressor 1988 K Designated application is suitable for the following fields of application: Flushing of pipes with water/air mix prior to the start-up
More informationNGP-250/500 Nitrogen Generator Quick Start Guide
NGP-250/500 Nitrogen Generator Quick Start Guide Version: A July 2013 Potter Electric Signal Company, LLC 5757 Phantom Dr., Suite 125 P. O. Box 42037 Hazelwood, MO 63042 Phone: (314) 595-6900 Document
More informationDIAPHRAGM PUMPS WITH KNF STABILIZATION SYSTEM
DIAPHRAGM PUMPS WITH KNF STABILIZATION SYSTEM DATA SHEET E 037 N 940.5 APE as AC version in IP 54 N 940.5 APE-W with multi-voltage power supply input (As an option adjustable with potentiometer or by external
More informationAE R8 December 2004 Reformatted November Copelametic Two-Stage Compressors Application and Service Instructions
AE19-1132 R8 December 2004 Reformatted November 2010 Copelametic Two-Stage Compressors Application and Service Instructions The Copeland two stage compressors have been developed to efficiently achieve
More informationPressure switch KP-E. Data sheet
Data sheet Pressure switch KP-E KP-E pressure switches for use in refrigeration and air conditioning systems are equipped with SPDT gold plated contacts and stainless steel bellows. The high pressure switches
More informationOPTIBAR P 1010 C Technical Datasheet
Technical Datasheet Pressure transmitter with recessed diaphragm for general applications Wide variety thanks to modular design Measuring ranges up to 250 bar / 3750 psi High overload and temperature stability
More information2/2- and 3/2-way Rocker Solenoid Valve - bistable (impulse) version
2/2- and 3/2-way Rocker Solenoid Valve - bistable (impulse) version Type 6624 Impulse can be combined with... 10mm width orifice DN 0.8 to 1.2 with pressure range vacuum to 5bar medium separation, for
More informationData Sheet Issue A
Features 1. Differential latching clappertype, lighweight, dependable construction. 2. Low Air Pressurized System, 8 psi -to- 26 psi (0,6 bar to- 1,8 bar) 3. Reset externally. Cover removal is not required.
More informationP499 Heavy Duty Pressure Transducer
P499 Heavy Duty Pressure Transducer Product Bulletin Code No. LIT-??? E Issued 11 2006 The P499 Series is a new global Pressure Transducer with an excellent price performance ratio. The P499 exceeds the
More informationRIX COMPRESSORS. MICROBOOST Owner s Manual CONFIGURATION A MB-115 MB-230. November 21, 2002 APPLICABILITY [ A]
RIX COMPRESSORS MICROBOOST Owner s Manual CONFIGURATION A MB-115 MB-230 November 21, 2002 APPLICABILITY [ A] INTRODUCTION Safety This electromechanical equipment is designed to produce high pressure gas.
More informationPressure controls for hydro carbons, zone II applications, Type KPE
MAKING MODERN LIVING POSSIBLE Technical brochure Pressure controls for hydro carbons, zone II applications, Type KPE KPE pressure controls for use in refrigeration and air conditioning systems with hydrocarbons
More informationSafety relief valves, type SFA 15 REFRIGERATION AND AIR CONDITIONING. Technical leaflet
Safety relief valves, type SFA 15 REFRIGERATION AND AIR CONDITIONING Technical leaflet Contents Page Introduction...3 Features...3 Technical data...4 Design...5 Capacity...6 Material specification...............................................................................8
More informationDual Modular Safety Shutoff Valves with NEMA 4x Enclosure DMV-D 704/604 DMV-DLE 704/604
Dual Modular Safety Shutoff Valves with NEMA 4x Enclosure DMV-D 704/604 DMV-DLE 704/604 Two normally closed safety shutoff valves in one housing; each with the following approval. CSA Certified ANSI Z21.21
More informationTwo-port seat valves
4 345 Two-port seat valves with flange, PN16 VVF45... Two-port seat valves with flange, PN16 Spheroidal cast iron GGG-40 DN50...150 mm k vs 19...300 m 3 /h Stroke 20 or 40 mm Can be equipped with actuators
More informationSafety relief valves Type SFA 15 and SFA 15-50
Data sheet Safety relief valves SFA 15 and SFA 15-50 SFA 15 and SFA 15-50 are standard, back pressure dependent safety relief valves in angleway execution, specially designed for protection of vessels
More informationEvaporator pressure regulator Type KVP
Data sheet Evaporator pressure regulator KVP The KVP is mounted in the suction line after the evaporator and is used to:. Maintain a constant evaporating pressure and thereby a constant surface temperature
More informationAperval Pressure Regulators
Pressure Regulators Pressure regulators is pilot-controlled pressure regulator for medium and low pressure applications. is normally a fail to open regulator and specificaly will open under the following
More informationDual Modular Safety Shutoff Valves with Proof of Closure. DMV-D/622 Series DMV-DLE/622 Series
Dual Modular Safety Shutoff Valves with Proof of Closure DMV-D/622 Series DMV-DLE/622 Series Two normally closed automatic shutoff valves in one housing. Valve 2 (V2) incorporates proof of closure. Each
More information