Specialist Access & Rescue Products Ltd.

Transcription

1 Specialist Access & Rescue Products Ltd. Tactical Equipment 2016

2 SAR Products CONTENTS Don t Compromise! SAR Products Ltd was founded in 2003 by Dave & Dorene Allport after Bacou-Dalloz formally Troll Safety Equipment, closed the Troll factory in Saddleworth and moved production overseas. Dave worked for over 22 years as a Technical Specialist for rescue & rope access and designed equipment and techniques used in these areas. He also started the Troll Training School and trained Fire & Rescue Services, Police, and Special Forces in the UK and around the world in rescue & rope techniques. We pride ourselves on manufacturing products that offer superior performance, reliability, user benefits and at the same time are cost effective. Our market knowledge and experience is what sets us apart. Our customer-focused attitude ensures that we continue to offer products that are backed up with exemplary customer service. Our policy is to manufacture high quality products to meet the increased demand for safety in both the national and international markets. We are committed to customer service and quality management, having been certified with the BS EN ISO 9001:2008 standard. Our highly skilled manufacturing department is where our innovative products are transformed from raw material to finished goods, within the 15,000 sq ft facility in Greater Manchester, England. We believe it is vital that every piece of safety equipment that we make has been thoroughly tested and inspected by highly competent people, reassuring the user that each and every component meets the highest standards. These standards for quality are in place during all stages of production, from yarn input to shipping of the product. All SAR s products are manufactured from certified quality raw materials. The finished products are subject to sample destruction testing or proof loading tests in accordance with current manufacturing standards. All of SAR s products are manufactured to the appropriate European standards required for it s equipment type. SAR Products Ltd now produces equipment that is shipped worldwide to over 20 different countries. Don t compromise! Harnesess Slings Shock Absorbing Lanyards Rope Lanyards Work Positioning Lanyards Karabiners Ascenders & Descenders Back-Up Devices Pulleys & Pulley Systems Bags Rope Stretchers Quadpods & Winch Accessories Pages 4-13 Pages Pages Pages Pages Pages Pages Pages Pages Pages Pages Pages Pages Pages

3 HARNESSES HARNESSES MERLIN FULL BODY HARNESS Merlin 6 REF: H0075 Merlin 6 QC REF: H0075QC Merlin 5 REF: H0074 Merlin 5 QC REF: H0074QC Merlin 4 REF: H0073 Merlin 4 QC REF: H0073QC Merlin 3 REF: H0072 Merlin 3 QC REF: H0072QC The Merlin full body harness has been designed for industrial rope access and technical rescue, where personnel wish to have either a wrap around or step in fit, with a pull over the head style. The wrap around fit has been constructed into all the SAR multi purpose harness range. This innovative pattern includes two independent front waist attachment points in different profiles. This is so the rope access and rescue technicians can utilise any type of rope descender without twisting the system. MERLIN TECH FULL BODY HARNESS Merlin 6 Tech REF: H0075T Merlin 6 Tech QC REF: H0075TQC Merlin 5 Tech REF: H0074T Merlin 5 Tech QC REF: H0074TQC Merlin 4 Tech REF: H0073T Merlin 4 Tech QC REF: H0073TQC Merlin 3 Tech REF: H0072T Merlin 3 Tech QC REF: H0072TQC The Merlin is also fitted with upper D connection points at the front and rear for safety back-up and fall arrest attachment. The laminated foam and shaped shoulder pads give additional comfort to the user. The Merlin harness comes in two different forms, the standard and Merlin Tech which has the addition of a fixed chest ascender. This gives an advantage to those who employ frogging techniques for ascending. Specifications: Merlin Full Body Harness Front fixed Karabiner Triple front attachments Merlin 4 & 6 styles only Two side attachments. Fold back when not required. Merlin 5 & 6 only One rear dorsal attachment. Fold away when not required Belay loop 30kN and Dee connections 25kN Fully adjustable waist and legs Step in fitting or wrap around fitting Twin adjustment on the waist Quick clip buckles on leg loops fitted on the QC styles Laminated sandwiched closed cell foam padding Shaped waist and legs for extra comfort Polyester webbing Three reinforced catch free gear rack loops Four equipment rings Slotted waist for fitting pouches, bolt bags or tool frogs Waist circumference: Min 74cm - Max 114cm Conforms to EN EN EN Specifications: Merlin Tech Body Harness Front fixed Croll. Triple front attachments Merlin 4 & 6 Styles only Two side attachments. Fold back when not required. Merlin 5 & 6 only One rear dorsal attachment. Fold away when not required Belay loop 30kN and Dee connections 25kN Fully adjustable waist and legs Step in fitting or wrap around fitting Twin adjustment on the waist Quick clip buckles on leg loops fitted on the QC styles Laminated sandwiched closed cell foam padding Shaped waist and legs for extra comfort Polyester webbing Three reinforced catch free gear rack loops Four equipment rings Slotted waist for fitting pouches, bolt bags or tool frogs Waist circumference: Min 74cm - Max 114cm Conforms to EN EN EN

4 HARNESSES RAPTOR 4 FULL BODY HARNESS Raptor 4 REF: H0030 RAPTOR 6 FULL BODY HARNESS Raptor 6 REF: H0031 KESTREL 2 FALL ARREST HARNESS Kestrel 2 REF: H0040 Kestrel 2 QC REF: H0042STDQC KESTREL 4 FALL ARREST HARNESS Kestrel 4 REF: H0043 Kestrel 4 QC REF: H0043STDQC The Raptor 4 & 6 full body harness has been specifically designed for rope access and technical rescue personnel who prefer a multi purpose full body without a restrictive chest strap. This approach comes from years of experience being suspended in harnesses and a different approach and attitude in the evolution of harness design. Modifications to the initial concept have been made over the years thanks to the constructive input from our world wide users. Side Shot Raptor 4 Technical Access Riggers Full Body Harness The Raptor, like the Merlin has the innovative pattern that includes two independent front waist attachments points in different profiles, this is so rope access and rescue technicians can utilise any type of rope descender without twisting the system. The Raptor 6 has two side D connections that fold back flat when not required for use. The harness also has sandwich closed cell foam formed and shaped pads for waist and legs giving superb comfort. Side Shot Raptor 6 Technical Access Riggers Full Body Harness The Kestrel fall arrest harness has been upgraded and now comes in two styles with two colour choices. The harness has a front and rear attachment point for fall arrest connection. We recommend the front be used for fall arrest. The side D s on the Kestrel 4 can be folded back when not in use, therefore reducing risk of inadvertent snarling. Quick clip buckles can be fitted on the leg straps and fixed padding can also be fitted to any of the Kestrel range when ordered. The padding is made of sandwich laminated foam to give added comfort when donning, this also makes the harness easier to fit as the padding takes any twists from the webbing. Fitting is normally wrap around but can be left fastened at the chest/sternum connection to give a quicker fitment. Shoulder adjustment buckles use two square link buckles and once adjusted to fit the user will not slip during everyday use. The leg connection is the standard square link and twin slot buckling system with a heavy duty elastic tidy for any excess webbing to be captivated and the alternative QC fitting also has an elastic tidy. Specifications: Raptor 4 & 6 Full Body Harnesses Belay loop 30kN and Dee s 25kN Triple front attachments One rear attachment Two side attachments (Raptor 6 only) Colours: Orange & Black, Blue & Black and All Black Fully adjustable waist and legs Wrap around or step in fitting Well-established and easy interlocking buckle system Twin adjustment on the waist Laminated sandwiched closed cell foam padding Shaped waist and legs for extra comfort High quality polyester webbing Four reinforced catch free gear rack loops Waist circumference: Min 74cm - Max 114cm Leg/Thigh circumference: Min 42cm - Max 70cm Weight: Raptor kg. Weight: Raptor kg. Conforms to EN , EN and EN Specifications: Kestrel 2 & 4 Fall Arrest Harnesses Kestrel 2: Kestrel 2 & 2QC Conforms to: EN Full body harness for Fall Arrest Kestrel 2 & 2QC Connections: One Sternal, One Dorsal Weight: 860g Size: Std fits: Sm, Med and Lrg. Ex Large & Ex Small made to order. Kestrel 4: Kestrel 4 & 4QC Conform to: EN and EN Work Positioning. Kestrel 4 & 4QC Connections: One Sternal, One Dorsal and Two side. Weight: 860g Size: Std fits: Sm, Med and Lrg. Ex Large & Ex Small made to order. 6 7

5 HARNESSES OSPREY CHEST HARNESS Osprey & Link Sling REF: H0016 Osprey Black & Link Sling REF: H0016MOD NSN: OSPREY QC CHEST HARNESS Osprey QC & Link Sling REF: H0016QC KITE CHEST HARNESS Kite Chest & Link Sling REF: H0010 NSN: KITE QC CHEST HARNESS Kite QC Chest & Link Sling REF: H0010QC The Osprey chest harness is an improvement in design and materials of classic chest harness models produced in the past. The chest harness has fitted adjustable shoulder & chest straps for improved fit and comfort for the user. The harness has front loops for use with a link sling to keep the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361. The Osprey can be used for connecting a chest ascender by using the 25mm front strap threaded through the top hole of the ascender and the bottom of the ascender connected to the sit. The chest ascender can be fitted over the link sling and a karabiner in the chest loops giving the ability to be used in an instant. The harnesses and link sling have been designed to be used for climbing, mountaineering, rescue, intervention and technical access. The Osprey QC chest harness is an improvement in design and materials of classic chest harness models produced in the past. The harness is fitted with adjustable shoulder & chest straps for improved fit and comfort for the user. It is also fitted with a front attachment quick clip buckle for easy donning and removal. The link sling can be fitted and kept in position and is easily removable to swap it out, The link sling keeps the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361. The Kite chest harness in combination with a threaded link sling have been designed to be used with any of the SAR sit harness range for added comfort and protection. The Kite can be utilised for climbing, mountaineering, rescue, intervention and technical access. The harness has front loops for use with a link sling to keep the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361. The Kite can be used for connecting a chest ascender by using the 25mm front strap threaded through the top hole of the ascender and the bottom of the ascender connected to the sit. The chest ascender can be fitted over the link sling and a karabiner in the chest loops giving the ability to be used in an instant. The Kite Chest Harness must not be used on its own. The Kite QC chest harness is fitted with a quick clip buckle for easy donning and removal. The Kite QC can be utilised for climbing, mountaineering, rescue, intervention and technical access. The link sling can be fitted and kept in position and is easily removable to swap it out, The link sling keeps the user in an upright sit position when connected to the sit harness to give a full body harness format conforming to EN361. The Kite QC chest harness must not be used on its own. Specifications: Osprey Chest Harnesses Wrap around adjustable chest strap and adjustable shoulder straps with interlocking fixed buckle systems Quick clip buckle front harness connection High quality polyester webbing Weight: 444 g, Link sling 50g The Osprey conforms to EN361 only when used with a SAR sit harness and a Link sling Link sling conforms to EN365, EN566 & EN795 Specifications: Osprey QC Chest Harnesses Wrap around adjustable chest strap and adjustable shoulder straps with interlocking fixed buckle systems Quick clip buckle front harness connection High quality polyester webbing Weight: 444g, Link Sling 50g The Osprey QC conforms to EN361 only when used with a SAR sit harness and a Link sling Link sling conforms to EN365, EN566 & EN795. Specifications: Kite Chest Harnesses Fully adjustable chest Wrap around cross fitting Interlocking shoulder buckle system High quality polyester webbing Weight: Chest 390g - Link Sling 40g The Kite chest conforms to EN361 only when used with a SAR sit harness and the Link sling Link sling conforms to EN365, EN566 & EN795 Specifications: Kite QC Chest Harnesses Fully adjustable chest Wrap around cross fitting Quick Clip buckle front harness connection Interlocking shoulder buckle system High quality polyester webbing Weight: 430g The Kite QC conforms to EN361 only when used with a SAR sit harness and a Link sling Link sling conforms to EN365, EN566 & EN

6 HARNESSES HARRIER 2 SIT HARNESS Harrier 2 REF: H0001 Harrier 2QC REF: H0001QC HARRIER 4 SIT HARNESS Harrier 4 REF: H0002 Harrier 4QC REF: H0002QC HARRIER LITE SIT HARNESS Harrier 2 Lite REF: H0001L Harrier 2 Lite REF: H0001M HAWK SIT HARNESS Hawk Black REF: H0004 Hawk Cam REF: H0003CAM NSN: The Harrier sit harness has been designed for rope access and technical rescue service personnel who prefer a separate sit and chest harness format to that of a multi purpose full body harness. The Harrier, like the Merlin and Raptor has the innovative pattern that includes two independent front waist attachments points in different profiles so that rope access and rescue technicians can utilise any type of rope descender without twisting the system. The Harrier has a wrap around fitting system for ease of donning and safety which stops the harness getting soiled, as is common with the step in type harnesses. The QC style has quick clip buckles on the leg loops. The Harrier Lite sit harness has been designed for rope access and technical rescue service personnel who prefer a separate sit and chest harness format. This lite sit harness differs from our standard Harrier by being fitted with the padding shape from our Hawk sit harness, lowing the weight and increasing moblity for the user. It still includes two independent front waist attachments points in different profiles so that rope access and rescue technicians can utilise any type of rope descender without twisting the system. The Harrier has a wrap around fitting system for ease of donning and safety which stops the harness getting soiled, as is common with the step in type harnesses. The QC style has quick clip buckles on the leg loops. The Hawk sit harness has been created for military and mountain rescue personnel and those who require the security and durability of a very robust harness as an alternative to that of a rock climbing harness. Quality materials, design, construction and simplicity in fitting make this the supreme personal issue sit harness. The emphasis in design was placed upon strength, stability, light weight and comfort. The Hawk delivers in all these fields and is perfect for anyone who needs to hang around. The wrap around fitting is also ideal when wearing crampons etc, but if preferred you may keep the buckles fastened to give step in fitment. Specifications: Harrier 2 & 4 Sit Harnesses Twin independent front attachment points Belay loop 30kN and Dee 25kN Two side attachments, Harrier 4 & 4QC Only Fully adjustable waist and legs Wrap around or step in fitting Well-established and easy interlocking buckle system on waist Twin adjustment on the waist to keep waist pad central Laminated formed closed cell foam padding Shaped waist and legs for extra comfort High quality polyester webbing Four reinforced gear rack loops Waist circumference: Min 74cm - Max 114cm. Leg/Thigh circumference: Min 42cm - Max 70cm. Harrier 2 conforms to EN813 Harrier 4 conforms to EN813 & EN358 Both harness conform to EN361 when linked with any of the SAR chest harnesses and a Link Sling. Weight: Harrier 2-1.1Kg Weight: Harrier 4-1.3Kg Upgrade coming soon: Working load limit: 150kg Harrier 4 Industrial & Work Positioning Sit Harness with Osprey QC & Link Sling Specifications: Harrier 2 Lite Sit Harnesses Specifications: Hawk Sit Harnesses Front attachment Double thickness 18mm belay loop 30kN Fully adjustable waist and legs Wrap around or step in fitting Well-established and easy interlocking buckle system Laminated formed, closed cell foam padding Shaped waist and legs for extra comfort High quality polyester webbing Four reinforced gear rack loops Waist circumference: Min 74cm - Max 120cm Leg/Thigh circumference: Min 42cm - Max 70cm. Weight: 900g Conforms to EN813 Sit Harness, EN361 Full Body Harness when linked with any of the SAR chest harness range and Link Sling. Upgrade coming soon: Working load limit: 150kg Front attachment Double thickness 18mm belay loop 30kN Fully adjustable waist and legs Wrap around or step in fitting Well-established and easy interlocking buckle system Laminated formed, closed cell foam padding Shaped waist and legs for extra comfort High quality polyester webbing Four reinforced gear rack loops Waist circumference: Min 74cm - Max 120cm Leg/Thigh circumference: Min 42cm - Max 70cm. Weight: 814g Conforms to EN813 Sit Harness, EN361 Full Body Harness when linked with any of the SAR chest harness range and Link Sling. Upgrade coming soon: Working load limit: 150kg Will conform to: EN12277-C 10 11

7 HARNESSES RIGGERS BELT WITH WEBBING EYE Belt with Webbing Eye - Black REF: RS019CW Belt with Webbing Eye - Cam REF: RS019BW RIGGERS BELT WITH TRI DEE Belt with Tri Dee - Black REF: RS019BTD Belt with Tri Dee - CAM REF: RS019CTD PADDED RIGGERS BELT WITH TRI DEE Padded Riggers Belt - Black REF: RS019BPAD Padded Riggers Belt - Cam REF: RS019CPAD DOG HARNESS Dog Harness inc Chest Pad REF: H0015P Our Riggers Belts are manufactured using a double thickness high grade polyester webbing for extra strength. The belt has been designed for multi functional uses and is available with either a webbing eye or an alloy Tri Dee, both types are ideal for multifunctional uses. The Riggers Belts use the adjustable quick release buckle which is rated to 18kN. Our Riggers Belts are manufactured using a double thickness high grade polyester webbing for extra strength. The belt has been designed for multi functional uses and is available with either a webbing eye or an alloy Tri Dee, both types are ideal for multifunctional uses. The Riggers Belts use the adjustable quick release buckle which is rated to 18kN. This Riggers Belt is padded for added comfort for the user, it is avaliable with either a 2 bar 3 bar buckle or a quick clip buckle. The belt is manufactured with double thickness high grade polyester webbing for extra strength. The belt has been designed for multi functional uses and is fitted with an alloy Tri Dee, ideal for multifunctional uses. The Riggers Belts use the adjustable quick release buckle which is rated to 18kN. Our Dog Harness is now a well tested and proven design with updated materials which is very popular with search and rescue dog handlers. The harness comes in two sections for ease of fitting and flexibility of use for the dog with both sections being fully adjustable. The front/body harness has a padded chest for comfort and agility, with separate detachable leg loops for additional security. The harness can be winched from the main lifting/lowering point with or without the leg loops dependent upon size, shape and weight of dog. Specifications: Riggers Belt Small: 26 to 32 Medium: 30 to 36 Large: 38 to 44 Weight Tri Dee: 260g Weight Webbing Eye: 230g Rated to 18kN. Specifications: Padded Riggers Belt Size: 31 to 54 Weight: 350g Rated to 18kN. Specifications: Dog Harness Chest pad (removable) - 6mm laminated closed cell foam. High grade 25mm and 45mm polyester webbing. Elastic retaining loops for stick light or torch. Fully adjustable for Sm, Med & Lrg size dogs. Weight: Chest section 300g 12 13

8 SLINGS SLINGS TWIN EYE SLINGS 10cm REF: S cm REF: S cm REF: S cm REF:S0007 ROCKER SLING ASSEMBLY Rocker Assembly Sling REF: S0014 Our Twin Eye Slings are made with a 18mm polyester superweb, and are rated to 24kN when new. This conforms to the highest standards set by EN354 of 22kN. Example sizes: 10cm & 20cm Twin Eyed Slings. These can be used with the Rocker or as a short extension for many things such as a cow s tails used in rope access. Our Twin Eye Slings have a test strength of 24kN when new. This conforms to the highest standards set by EN354 of 22kN. The Gator karabiners are made from high grade alloy, formed from round bar then pressed to shape to give extra strength. They have a key lock on the nose and gate to stop web catching. 30cm & 60cm Twin Eyed Slings. They can be used as a safety back-up link for yourself or a casualty in rescue, main ascender link sling in ascending and many other uses for the experienced technician. Specifications: Twin Eye Sling Specifications: Rocker Sling Assembly Rated load 24kN Made from high grade polyester webbing Individual serial number Conforms to EN354, EN566, EN795-B Length size variations available on request. Twin eyes available to be made with 25mm webbing, increasing the rated load to 35kN Working length including karabiners 25cm Rated load 24kN High grade polyester webbing Individual serial number Conforms to EN354 EN566 EN795-B Karabiner EN362 Weight: 128g 14 15

9 SLINGS 18mm CIRCULAR SLINGS 20cm REF: S cm REF: S cm REF: S cm REF: S cm REF: S cm REF: S mm CIRCULAR SLINGS 120cm REF: S cm REF: S cm REF: S0013 LINK SLING 15cm REF: H cm REF: H cm REF: H0022 NSN: Our Link Sling is made from high grade polyester with a weave that keeps the locking stitch away from the edge to help reduce wear/ abrasion. It is made in two different lengths which are colour coded, 15cm for children and 20cm for adults. Longer slings can be made if required, along with all black versions. CIRCULAR ROPE SLING 120cm REF: S cm REF: S0056 These circular slings are made using a 18mm polyester superweb and have a tensile strength of 24kN which is far above the required standard. Standard sizes for the 18mm sling include 20cm, 30cm, 60cm, 150cm, 240cm, & 490cm. However the slings can be made to any required length requested by the client. This type of sling is possibly the most used sling around the world. It has many uses for the experienced rope technician such as: anchors/ belay s, self equalizing belay, foot loops for traversing, high steppers. These Circular Slings are made using a 25mm polyester superweb and have a tensile strength of 35kN which is far above the required standard. Standard sizes for the 25mm sling include 120cm & 240cm, but can be made to any required length. The most popular size for the circular sling is 240cm, this is because it has many uses for the experienced rope access or rescue technician in a variety of environments such as; anchors/belay s, self equalizing belay, foot loops for traversing, high steppers, and chest harness. It is the main link between any of our chest and sit harnesses to form a full body harness, compliant with EN361 (Personal protective equipment against falls from height - full body harnesses). Our Circular Rope Sling is made from our 11mm tactical rescue rope and can be used for many different applications. The high-twist 32-strand mantle braid provides for high dirt resistance, better grip and high abrasion protection. The sling is made from nylon and has a tensile strength of 22kN. Please Note: working length is half the advertised sling length. Please Note: Working length is half the advertised sling length. Specifications: 18mm Circular Slings Specifications: 25mm Circular Slings Rated load 24kN High grade polyester webbing Individual serial number Conforms to EN354, EN566 & EN795-B Size variations available on request. Rated load 35kN High grade polyester webbing Individual serial number Conforms to EN354, EN566 & EN795-B Size variations available on request. Specifications: Link Sling Rated load 24kN High grade polyester webbing Individual serial number Colour coded between sizes Standard length: 20cm Weight: 40g Conforms to: EN354, EN566 and EN79 Size variations available on request. Specifications: Circular Rope Sling Colour: White with red fleck, Black on request Material: Nylon Sizes: As above, variations on request Weight: 80g per Lm Sling strength: 22kN Conforms to: EN566 & EN795-B

10 SINGLE CLIP LOOP LANYARD REF: L0010S (without Scaff Hooks) REF: L0010SC (with Scaff Hooks) The Single Clip Loop Lanyard is made using 25mm polyester superweb with a total length of 1.3m. It has a protected connection eye on the leg of the lanyard. This is so the user can wrap the lanyard around larger anchors and still load the connector/karabiner in the correct profile. This also shortens the lanyard therefore reducing any potential fall distance. The lanyard can be supplied with or without scaffold hooks & karabiner. TWIN CLIP LOOP LANYARD REF: L0010T (without scaff hooks) REF: L0010TC (with scaff hooks) The Twin Clip Loop Lanyard is made using 25mm polyester superweb with a total length of 1.3m. It has a protected connection eye on each leg of the lanyard. This is so the user can wrap the lanyard around larger anchors and still load the connector/karabiner in the correct profile. This also shortens the lanyard therefore reducing any potential fall distance. The lanyard can be supplied with or without scaffold hooks & karabiner. SINGLE SHOCK ABSORBING ROPE LANYARD Single 1.6m with connectors REF: L0019 Single 1.3m without connectors REF: L0019C Our Single & Twin Shock Absorbing Rope Lanyards are made using a nylon 11mm low stretch rope. This product is the right choice for many different applications. The high-twist 32-strand mantle braid provides for high abrasion protection, better grip, and high dirt resistance. The lanyards are fitted with a large aluminium ring so that the connector on the fly end can be clipped back or parked in position. TWIN SHOCK ABSORBING ROPE LANYARD Twin 1.6m with connectors REF: L0021 Twin 1.3m without connectors REF: L0021C All connectors fitted conform to EN362. Our rope lanyards come in the standard white with red fleck or black on request. SHOCK ABSORBING LANYARDS Specifications: Single Clip Loop Lanyard Material: 25mm polyester superweb. Clip loop eyes: 2 Colours: Variations on request. Length from absorber eye to fly end eye = 1.3m. Length when fitted with karabiner/connector 1.6m Maximum working load 130kg Weight: 446g Conforms to EN shock absorbing lanyard. Note: Other lengths can be made, up to a max. total length of 2m or the lanyard can be supplied without any connectors fitted. Specifications: Twin Clip Loop Lanyard Material: 25mm polyester superweb. Clip loop eyes: 2 per leg Colours: Variations on request. Length from absorber eye to fly end eye = 1.3m. Length when fitted with connectors 1.6m Maximum working load 130kg Weight: 472g Conforms to EN shock absorbing lanyard. Note: Other lengths can be made, up to a max total length of 2m or the lanyard can be supplied without any connectors fitted. Specifications: Single / Twin Shock Absorbing Rope Lanyards Colour: White with red fleck, Black on request Material: Nylon 11mm low stretch rope Std size: 1.3m - variations on request Maximum working load 130Kg Conform to: EN

11 ROPE LANYARDS ROPE LANYARDS ADJUSTABLE ROPE LANYARD REF: L0021F ROPE LANYARD 60cm REF: L m REF: L m REF: L m REF: L The Adjustable Rope Lanyard is a good choice for many different applications, with a tensile strength of 22kN, the high-twist 32-strand mantle braid provides high abrasion protection, better grip and high dirt resistance. This lanyard is ideal for work positioning and work restraint and also passes the full standard EN354. The Standard Rope Lanyard has a tensile strength of 22kN. The high-twist 32-strand mantle braid provides high abrasion protection, better grip and high dirt resistance. The rope lanyard can be made to any required length under 2m. Specifications: Adjustable Rope Lanyard Colour: White with red fleck, Black on request. Material: Nylon 11mm low stretch rope. Sizes: As above, variations on request Lanyard strength: 22kN. Conforms to: EN354:2010 & EN358:1999 Note: These lanyards are not to be used for fall arrest. Lanyards complying to EN354 must be used in conjunction with an energy absorber complying to EN355 for fall arrest and not to exceed 2m in length. Specifications: Rope Lanyard Colour: White with red fleck, Black on request. Material: Nylon low stretch rope. Sizes: On request (under 2m). Sling Strength: 22kN. Conforms to: EN354:2010 Note: These lanyards are not to be used for fall arrest. Lanyards complying to EN354 must be used in conjunction with an energy absorber complying to EN355 for fall arrest and not to exceed 2m in length

12 WORK POSITIONING LANYARDS 2m, REF: RAD-2M / 3m, REF: RAD-3M 4m, REF: RAD-2M / 5m, REF: RAD-2M 2m, REF: RAD-2MH / 3m, REF: RAD-3MH 4m, REF: RAD-2MH / 5m, REF: RAD-2MH RAD WORK POSITIONING LANYARDS Our RAD (Rope Adjustment Device) evolved from our A-B Descender. Both multi functional devices, the RAD is smaller, lighter and has been tested to and conforms with more European standards for a wider variety of applications. This means that the RAD can be used as a stand alone device in many more environments, therefore reducing the need for multiple devices and cost for equipment. The swivel plate screw can be removed and the device opened for changing rope if inadvertently damaged during work, or for fitting onto a descent rope. It can be fitted with any length of rope you require. The rope used is our 11mm Low Stretch or Rescue rope with a sewn eye at one end and a sewn block/stopper at the fly end. The RAD can be used in many environments where an adjustable lanyard, pole strap/rope or restraint is required. The RAD fully conforms to, EN12841-C-06 and EN system. WORK POSITIONING LANYARDS Specifications: RAD Work Postioning Lanyards Average static load with above rope before creep 4kN Static strength as in the test 15kN for 3mins Weight: 310g + 80g per Meter of rope Material: High strength alloy plates and handle anodized with stainless steel cam and spindles. Colour: Black Rope colour: white with red fleck or black on request. Conforms to: EN358 & EN12841-C 2m, REF: RAD-2MS / 3m, REF: RAD-3MS 4m, REF: RAD-4MS / 5m, REF: RAD-5MS 22 23

13 KARABINERS GECKO The Gecko is versatile and light. The Gecko is made from high grade alloy bar, which is then pressed into shape to give it extra strength. This karabiner features a key lock design on the nose and gate to stop web catching. REF: K0001 Specifications: Gecko Karabiner Material: Alloy, anodized black or gold screw gate. Strength: 30kN Gate opening strength: 10kN Sideways strength: 9kN Gate open size: 22mm Weight: 84g Length:114mm Width: 78mm Individual serial number Conforms to EN362 GATOR The Gator karabiner, designed originally for sports climbing, the Gator is used for the rocker back-up sling assembly but is also ideal for use as a small spare karabiner for carrying accessories. The Gator is made from high grade alloy bar, which is then pressed into shape to give it extra strength. This karabiner features a key lock design on the nose and gate to stop web catching. KARABINERS REF: K0016 Specifications: Gator Karabiner Material: Alloy, anodized black screwgate. Strength: 25kN Gate opening strength: 8kN Sideways strength: 8kN Gate open size: 15mm Weight: 58g Length: 100mm Width: 64mm Individual serial number Conforms to EN362 KLET The Klet karabiner is ideal for kits where weight is a factor, and technical rope work required. It has a wide base and excellent gate clearance. Made from high grade alloy bar, which is then pressed into shape to give extra strength, and a high tensile strength for its large size. This karabiner features a screw closure and its key lock design gives it a catch free gate. REF: K0005L (lobster) REF: K0005B (black) NSN: Specifications: Klet Karabiner Material: Alloy, anodized black or lobster. Strength: 30kN Gate opening strength: 11kN Sideways strength: 10kN Gate open size: 26mm Weight: 94g Length: 119mm Width: 77mm Individual serial number Conforms to EN

14 KARABINERS STEEL KELT Steel Klet REF: K0007 STEEL OVAL Steel Oval REF: K00017 DOUBLE ACTION SNAPHOOK Double Action Snaphook REF: K0002 TRIPLE ACTION SNAPHOOK Triple Action Snaphook REF: X0079 This is the steel version of our alloy Klet karabiner. The steel Klet has the same dimensions as the alloy Klet, a wide base and excellent gate clearance. Its heavier weight has the added benefit of almost doubling the tensile strength of alloy version. The standard Steel Oval karabiner with screw gate, with a high weight to strength ratio giving a high tensile strength making this a very versatile karabiner. The Double Action Snaphook has a Safety Heel to help reduce the risk of accidental opening. This Snaphook also has a Blind nose design, to minimise rope snagging. The Triple Action Snaphook is fitted with a third action catch for increased safety. The safety heel further reduces the risk of accidental opening and the Blind nose helps to prevent rope snagging. This karabiner features a screw closure and its key lock design gives it a catch free gate. Specifications: Steel Kelt Material: Steel zinc plated. Strength: 50kN Gate opening strength: 20kN Sideways strength: 15kN Gate open size: 25mm Weight: 258g Length: 119mm Width: 77mm Individual serial number Conforms to EN362 Specifications: Steel Oval Specifications: Double Action Snap Hook Specifications: Triple Action Snap Hook Material: Steel Strength: 25kN Gate open size: 18mm Weight: 174g Length: 107mm Width: 56mm Individual serial numbered on request. Conforms to EN362 Weight: 102g Gate opening gap: 22mm Eye diameter: 20mm Material: Aluminium Finish: Anodized Colour: Black Minimum breaking strain: 27kN Individual serial number Conforms to: EN362 Weight: 138g Gate opening gap: 22mm Eye diameter: 20mm Material: Aluminium Finish: Anodized Colour: red/grey, black on request Minimum breaking strain: 27kN Individual serial number Conforms to: EN

15 KARABINERS DELTA STEEL MAILLON 10mm Steel REF: M mm Black REF: M0001B 8mm Steel REF: M0005 8mm Black REF: M0005B DEE STEEL MAILLON REF: M0006 PEAR STEEL MAILLON REF: M0009 OVAL STEEL MAILLON REF: M0012 The Steel Delta maillon is used mainly in rescue and rope access. It is used for three way loads, for equalizing two single pulleys to work as twin, to fix a pulley to an ascender for using it as a pulley brake and as a lifting link on stretcher straps to mention just a few. The Delta maillon are available in 2 different sizes, 8mm and 10mm. The Dee Steel maillon was initially used by the sport & caving industry as a front connection to their sit harness. It allows the joining of the two webbing loops and also allows multiple connections of other mailions or karabiners. The Pear Steel maillon is used as an added connection to the front of sit harness, giving a second or third independent connection point. It is also used in certain techniques in rescue for a multi connection point and its shape gives an added advantage to using the Dee or Delta maillon. The Oval Steel maillon is a long opening maillon and is possibly the most used style of all the maillon products. This maillon will cover most requirements in rope access and rescue, and can be used in lots of different areas. Specifications: Delta Steel Maillon 8mm Material: Mild steel galvanised Strength: 27.5kN Gate open size: 10mm Wire size: 8mm Height: 73mm Width: 56mm Weight: 92g Individual serial numbered Conforms to EN12275 & EN362:05/Q Specifications: Delta Steel Maillon 10mm Material: Mild steel galvanised Strength: break load approx 45kN Gate open size: 12mm Wire size: 10mm. Height: 88mm Width: 66mm Weight: 158g Individual serial numbered Conforms to EN12275 & EN362:05/Q Specifications: Dee Steel Maillon Material: Mild steel galvanised Strength: 25kN Gate open size:18mm Weight: 174g Length: 107mm Width: 56mm Individual serial numbered Conforms to EN12275 & EN362:05/Q Specifications: Pear Steel Maillon Material: Mild steel galvanised Strength: WLL 720kg break load approx. 36kN Gate open size: 20.5mm Wire size: 10mm Height: 118m Width: 65mm Weight: 184g Individual serial numbered Conforms to EN12275 & EN362:05/Q Specifications: Oval Steel Maillon Material: Mild steel galvanised Strength: WLL 800kg break load approx, 40kN Gate open size: 16mm Wire size: 7mm Height: 78mm Width: 30mm Weight: 61g Individual serial numbered Conforms to EN12275 & EN362:05/Q 28 29

16 ASCENDERS & DESCENDERS Our A-B Descender has been designed for technical rope access, intervention, and rescue. It has a handle style control that can be used in two modes, either squeeze the handle or flip it down to give extra leverage when required. There is a spring fitted to help keep the handle close to the body when not in use and is also fitted with a panic grab brake. A-B DESCENDER Gold A-B REF: RA002 Black A-B REF: RA002B NSN: EN341 is the standard for a descent rescue/egress system and any system conforming to this standard must be used with the type of rope with which it was tested. Any strength quoted is when the product is new and is in accordance with the appropriate standards. ASCENDERS & DESCENDERS The A-B fully conforms with two European standards, these are; EN12841-C rope adjustment device (descenders) and EN341-B descenders for rescue. The two standards are very different, EN12841-C covers the device only, so that it can be used with different types of kernmantle rope. To view instructional video about the A-B Descender, scan QR code Specifications: A-B Descender Colour: Black or Gold Rope: 10.5mm to 12.5mm kernmantle Max Load: 300kg Control: Leaver/Cam & panic grab brake Weight: 442g Conforms to EN341-B and EN12841-C Sample tests: Min. Static Slip: 4.5kN 10.5mm x 22 plait Route 44 Singing rock, 5.5kN 24 plait SAR. 8kN 12.5mm x 20 plait Cousin Dynamic impact and slip distance 100kg FF1-1M: 10.5mm = 5.1kN & 51cm 6.2kN & 26cm, 12.5mm = 7kN & 15cm 30 31

17 Our RAD (Rope Adjustment Device) evolved from our A-B Descender. Both multi functional devices, the RAD is smaller, lighter and has been tested to and conforms with more European standards for a wider variety of applications. This means that the RAD can be used as a stand alone device in many more environments, therefore reducing the need for multiple devices and increased cost. The RAD is capable of being used in many environments as a belay device or as a descender. RAD RAD REF: X0147 The RAD is an ideal small & light weight descender for peronal military issue. The device fully conforms to, EN12841:2006-C, EN15151:2012 Type 6 & EN358:1999 The Pro ALLP Tech was the result of years of technical development and research and was originally designed for technical rescue. The screw control system of the Pro ALLP Tech has a very fine speed control which allows the technical rope user a finer management of descent, especially in rescue. The Pro ALLP Tech was the first descender to be tested to pren C rope adjustment devices. Most personnel are lead to think that EN341 is the standard for descenders but this is incorrect. EN341 is descenders for rescue, which is a system, not an item of equipment, to fully conform with this standard the descender must be sold with the correct rope as a package. PRO ALLP TECH Black Pro ALLP Tech REF: RA001B The Pro ALLP Tech was tested under laboratory conditions and was proven to be compatible with low stretch ropes of 10.5 to 12.7mm from one manufacturer, in compliance with EN1891. The Pro ALLP Tech was also tested with a 200kg mass at F.F.1 1M. We strongly recommend the that users be trained in the many applications of the Pro ALLP Tech. ASCENDERS & DESCENDERS Specifications: RAD Weight: 310g EN12841:2006-C mm Rope Diameter rated to 200kg EN358: mm Rope Diameter rated to 200kg EN :2012 Type mm Dynamic Rope Diameter Material: High strength alloy plates and handle anodized with stainless steel cam and spindles. Specifications: Pro ALLP Tech Control: Screw and Lever Weight: 575g Min Static slippage: 3.5 kn Min Static load: against a barrel knot: 15kN Max Impact:100kg mass F.F.2 with 1m strop: 6kN 32 33

18 FIGURE OF 8 WITH EARS REF: RA017 The Figure of 8 descender is used for lowering or abseiling. Manufactured from high strength aluminium alloy. It has a large eye with room for an extra karabiner and ears to prevent the rope rolling into a locked position. The figure of 8 does twist the rope and is best used on firm rather than soft rope. It is not recommended for use with rope that comes straight out of a rope bag. It should only be used with a back-up safety lock, such as a Rocker or Prussic style rope lock. CLEAN CAM ASCENDER Lobster R/H REF: RA023L - Silver L/H REF: RA022S Black L/H REF: RA022B - NSN: Black R/H REF: RA023B - NSN: The Clean Cam ascender is made for continuous use in the most arduous of conditions. The frames are formed using high strength aluminium plate and it has a stainless steel self clean cam. The handle grip is of soft moulded nylon. This product comes as right and left handed. Right handed having a orange body & the left handed having a silver body. The product is also available in black if requested for both left & right handed. ASCENDER Left Handed REF: RA004 Right Handed REF: RA005 The Ascender is made for continuous use in the most arduous of conditions.the frames are machined from high strength extruded aluminium and have a stainless steel cam. This product comes as right or left handed, the right having a green handle and the left red. When tested on a 12.7mm superline there was a primary failure of the rope sheath at 11kN with the ascender still operable. CHEST CROLL REF: RA009 This ascender was designed to fit flat against the body around the upper stomach/lower sternum area of the chest. Use along with a handled ascender and foot loop for ascending rope. It can be connected to any of our harness range. Our Kite chest harness has the required connection strap included in its design to fit into the top strap hole of the Croll without the need for an extra shoulder strap. ASCENDERS & DESCENDERS Specifications: Figure of 8 With Ears Specifications: Clean Cam Ascender Specifications: Ascender Specifications: Chest Croll Rope size: 9 13mm dia. MBS: 35kN Colour: Black Material: Anodized aluminium. Colour: Right Handed - Lobster, Left Handed - Silver, or all black Fits Rope Size: 8mm to 13mm Weight: 216g Conforms to EN567 Material: Anodized aluminium. Colour: Left Handed - Black, Right Handed - Grey Weight: 400g Rope dia: 10 to13mm Conforms to EN567 Material: Anodized Aluminium Colour: Black Fits Rope Size: 8 to 13mm Weight: 148g Standard: EN567, EN12841 From summer 2015 this product will also conform to EN1284:2006-B for 10-13mm rope at 100kg 34 35

19 BACK UP DEVICES BACK UP DEVICES ROCKER Gold Rocker REF: RA003 Black Rocker REF: RA003B NSN: The Rocker is primarily used as a safety back-up in industrial rope access, fire service or technical rescue as a fall arrest device in the event of main line failure. It can also be used as a rescue back-up device for two people as the Rocker has been tested for this purpose using a 200kg mass in a fall factor two scenario. The test was undertaken using an 11mm 32plait low stretch rope and a 1M sling. The maximum impact recorded was 5.7kN, with a slip distance of 1.10M. The Rocker complies to EN353-2:02 EN358:00 and EN12841-A:06. We recommend it to be used with a 10 cm Rocker link sling with two Gator karabiners. This set up comes as a kit for use with the Rocker and we highly recommend it to be connected to the chest connection point on the harness. This would put the user in an upright position and is therefore compliant with fall arrest standards. It is for this reason it is also not recommended to be used with a long cow s tail from the waist connection point of the harness. This device can also be used in many other situations i.e. as a hauling/ pulley bake etc. The Rocker was confirmed in the U.K. H.S.E. industrial rope access investigation into items of personal protective equipment as the best performer and to have the highest degree of consistency. We strongly recommend that users be trained in use of the Rocker. Rocker Sling Assembly REF: S0014 Specifications: Rocker Average static load: 3.5kN Max dynamic impact: 5.9kN Static strength: 15kN Max dynamic impact: 200kg 5.7kN Max Static 350kg Weight: 169g Material high strength alloy with hard anodising on cams Colours: Black or Gold Uses: Fall arrest back up device Work positioning locking device Horizontal safety line absorbing anchor Rope Access & Rescue safety back-up Pulley brake Ascender Belay brake 36 37

20 PULLEYS & PULLEY SYSTEMS Single Pulley REF: P0010 Double Pulley REF: P0014 MINI PULLEYS Specifications: Single Mini Pulley Side plate size: Height 75mm Width 45mm Material: High grade alloy Colour: Black or Gold Strength: 36kN Weight 87g Standard: EN12278 Max 13mm rope Individual serial number Conforms to EN12278 Specifications: Double Mini Pulley Side plate size: Height 94mm Width 44mm Material: High grade alloy Colour: Black or Gold Strength: 36kN Weight 153g Standard: EN12278 Max 13mm rope Individual serial number Conforms to EN12278 STANDARD PULLEYS Specifications: Single Standard Pulley Side plate size: Height 90mm Width 52mm Material: High grade alloy Colour: Black or Gold Strength: 36kN Weight 158g Standard: EN12278 Max 13mm rope Individual serial number Conforms to EN12278 Specifications: Double Standard Pulley Side plate size: Height 110mm Width 52mm Material: High grade alloy Colour: Black or Gold Strength: 36kN Weight 284g Standard: EN12278 Max 13mm rope Individual serial number Conforms to EN12278 PULLEYS & PULLEY SYSTEMS Single Pulley REF: P0016 Double PulleyREF: P0019 SINGLE DOUBLE ENDED PULLEY The Single Double Ended pulley is used in systems along with the double pulley. It can be used for all the same uses as the standard single with a extra connection point. Specifications: Single Double Ended Pulley Side plate size: Height 126mm Width 52mm Material: High grade alloy Colour: Black or Gold Strength: 36kN Weight 181g Standard: EN12278 Max 13mm rope Individual serial number Conforms to EN12278 Single Double Pulley REF: P

21 BAGS BAGS ROPE BAGS Small REF: B0003 Medium REF: B0006 Large REF: B0009 X Large REF: B0012 EQUIPMENT BACKPACK REF: B0015 Our Rope Bags come in four sizes and six different colours, blue being standard. All SAR bags have an outside pocket for any documentation such as the rope record card, draw cord closure and fitted stainless steel hauling karabiner. Our small bag has one simple adjustable shoulder carrying strap. The medium, large and extra Large bags have twin adjustable shoulder straps and a side carrying strap. All the bags are made from heavy duty high grade PVC reinforced polyester. Camoflauge bags are made from heavy duty cordura. The Equipment Backpack has been designed for rope access and rescue personnel to carry their individual equipment such as harness, helmet, slings, karabiners etc. On the outside front panel is an equipment draw cord for carrying such items as rope, splints, etc. It has two rucksack style shoulder straps and top carrying handle. Specifications: Rope Bag Specifications: Equipment Backpack Small bag: 20Ltrs or 66m of 11mm rope Medium bag: 30Ltrs or 100m of 11mm rope Large bag: 50Ltrs or 200m of 11mm rope X Large bag: 84Ltrs or 250m of 11mm rope Size: 30Ltrs or 100m of 11mm rope 40 41

22 CRAG KIT BAG Designed in association with Oldham Mountain Rescue Team, the Crag Kit Bag contains several compartments on internal folding walls. It is an ideal way to keep all of the kit in one bag and is easy to access. The bag comes complete with shoulder straps. Specifications: Crag Kit Bag Weight: 1kg Colours: Black or Camouflage EQUIPMENT POUCH Our Equipment Pouches come in three sizes and are made from heavy duty cordura nylon. The smallest is mainly used as a harness pouch, the other two for equipment storage within your equipment bag. They have velcro belt loops that can be used to strap them on your carrying bag or back pack. Specifications: Equipment Pouch Small: Height 15cm x Width 9cm x Depth 5cm Med: Height 20cm x Width 16cm x Depth 7cm Large: Height 23cm x Width 18cm x Depth 7cm Colour: Black or Camouflage BAGS REF: B0026 Small REF: B0021 Medium REF: B0024 Large REF: B0025 ROPE LEG BAG The Rope Leg Bag has been designed looking at slight modifications to the standard to enhance the fit and securing system. Made from heavy duty black cordura nylon with velcro leg securing straps, foot loop/stirrup strap and a hand carry strap which will allow the user to clip the bag onto their harness if required. 35L EQUIPMENT HOLDALL The 35L holdall is a standard simple design with a single zip closure with reinforced carrying handles. The bag is made from the same high quality material as our rope bags and equipment backpack. The holdall is available in six different colours, blue being standard. Specifications: Rope Leg Bag Weight: 280g Rope Capacity: 50m of 11mm rope Colours: Black or Camouflage Specifications: 35L Equipment Holdall Weight: 680g Rope Capacity: 50m of 11mm rope Colours: Black or Camouflage REF: B0014 REF: B0018 Equipment BAG The Equipment Bag is a multipurpose draw string bag made from heavy duty cordura nylon. The bag has an adjustable shoulder strap, drain hole, and a steel spring hook so you can attach it to other equipment and gear loops. Specifications: Equipment Bag Weight: 380g Rope Capacity: 50m of 11mm rope Colours: Black 75L EQUIPMENT HOLDALL The 75L equipment holdall has been designed for rope access and rescue personnel to carry their individual equipment and for those wishing to pack team equipment into one bag. The twin zip flap lid allows the user to access all areas of the bag with ease. The bag has two carrying strap handles that are reinforced around the base of the bag, two drag handles at each end that can be used for hauling vertically when required and two padded shoulder carrying straps. Specifications: 75L Equipment Holdall Weight: 1.4kg Colours: Black or Camouflage REF: B0016SARBK REF: B

23 ROPE & CORDAGE ROPE & CORDAGE 11mm RESCUE & ACCESS ROPE REF: RR002B NSN: ACCESSORY CORD 6mm Accessory Cord REF: RR0012 8mm Accessory Cord REF: RR013 The 11mm Rescue & Access Tactical Rope has been developed to withstand heavy loads for e.g. winches, dirt and climatic influences. The rope is extremely robust and compact and also soft in handling making it ideal for tactical intervention and rescue. The rope has a tensile strength of 32kN. The Prusik cord is made of high-grade polyester and is used for Prusik slings and for universal applications. The high-twist 32-strand mantle braid makes the accessory cord immune to dirt and provides for ergonomic handling and high abrasion resistance. High-quality manufacturing provides for high strength and a low danger of cracking. Specifications: 11mm Rescue & Access Rope Diameter 11mm. Conforms to EN1891-A Material: Low stretch nylon Outer plait: (sheath) 16 Outer braids 32 Inner core 14 Static strength:32kn Static strength fig 8 knot: 18kN Static strength fig 10 knot: 22kN Elongation: 3-5% Colours: Black and white with red fleck Free cutting and labelling service on orders. Rope can be cut up to 200m on standard orders and 700m on special request. Specifications: 6mm & 8mm Accessory Cord High-grade polyester High-twist 32-strand mantle braid Slip-proof, dirt-resistant, abrasion-resistant 6mm and 8mm Minimum breaking strength 6mm Cord 940daN Minimum breaking strength 8mm Cord 1400daN 44 45

24 ROPE & CORDAGE STITCHED ROPE EYE ROPE PROTECTORS CLIFF EDGE ROLLER EDGE BARS REF: RR015 REF: RR020 REF: RR021 REF: RA021 REF: RA015 We can now offer a sewn eye termination on any length of 11mm rope that we stock in our range. The sewn termination has passed the test requirements of a sewn termination. All rope sewn terminations are marked up with a unique serial number, length, rope diameter, and year of manufacture. The sewn eye is also covered with a transparent protective sheath that helps protect the stitching against abrasion and the ingress of dirt but allows for the ease of inspection. Heavy Duty Rope Protector REF: RR020 Our heavy duty Rope Protector is made from high quality polyester. They are extra thick giving more protection over sharp edges than the standard Rope Protectors. Standard Rope Protector REF: RR021 These are made from PVC reinforced polyester sheet material available in blue, red, black or yellow. On running ropes both the above can glaze due to friction, but specials can be made from canvas. Our Cliff Edge Roller was designed to be a heavy duty alternative to other rope other edge protectors. It is fitted with under frame spikes to allow it to grip into the ground this roller. The Edge bars have been designed as a caterpillar/edge roller style rack. Made in two segments of four 12.5mm dia. x 100mm stainless steel fixed bars. The two segments with two bars each give a total length of 32cm. Each segment is joined by two small steel maillons so they can be disconnected and used as two separate units if required, or others can be added. The sections can be used either way up keeping the bars high or low off the surface. The full unit comes with in an Equipment Pouch that can be fitted to a belt or back pack straps. Specifications: Stitched Rope Eye Specifications: Rope Protectors Heavy duty 15cm wide 50cm Long Velcro fastener 4mm cord tab Colour: Red Specifications: Cliff Edge Roller Specifications: Edge Bars Static strength 22kN. Stainless steel Length: 700mm Width: 367mm Weight: 3.75kg Working Length of roller: 250mm Stainless steel bars Aluminium powder coated side plates Segment/unit length: 150mm Segment/unit width: 100mm Weight (inclusive of maillons): 332gm per segment. Total weight inc. Equipment pouch: 728g Standard 15cm Wide 70cm Long Velcro fastener 4mm cord tab Colours: Yellow or black 46 47

25 STRETCHERS & ACCESSORIES We are always striving to keep at the forefront of development & design. As a result of this we have once again improved our EVAC body splint. The thickness of the lower outer skin has been increased to give more resistance to abrasion, whilst using a new lightweight material on the upper skin in order to maintain the overall weight of the item. We have also changed the head strap to give two fitting systems to give a firmer head restraint. The EVAC has a width of 68cm across both the shoulder and hip areas and is 205 cm long, giving more security and protection to the casualty. It has six horizontal lifting loops, three down each side, positioned along the main trunk/torso of the casualty. All the main casualty securing cross straps are of 50mm webbing with adjustable clip buckles. It has an integral body harness made from 25mm web with crutch padding and adjustable foot support with padding for extra security and to stop body slip when in a vertical or angular mode of lift. EVAC BODY SPLINT REF: ST003 The two main vertical lifting loops are positioned at the shoulder which gives a true vertical lifting position for the casualty. The head section can be formed into a cone to disperse debris when dragging through confined spaces. The strap holding the Body Splint in position when rolled has a fitted pad and can be used for a head restraint by threading it around the outer loops on the coned area. It can also be used as a lifting mat without the use of the straps. Two people can transfer a casualty from one flat area to another keeping the casualty in a horizontal mode. STRETCHERS & ACCESSORIES Specifications: Evac Body Splint - Camoflage Width: 68cm Length: 205cm Packed size inc. bag: 75 x 30cm Weight: 6.8Kg The SAR Evac stretcher conforms to EC DECLARATION OF CONFORMITY 93/42/EEC concerning medical devices. Article 11 (5) and annex VII Class 1 devices. Specifications: Evac Body Splint - Black Width: 68cm Length: 205cm Packed size inc. bag: 75 x 30cm Weight: 7.2Kg The SAR Evac stretcher conforms to EC DECLARATION OF CONFORMITY 93/42/EEC concerning medical devices. Article 11 (5) and annex VII Class 1 devices

26 The new Alpine Lite stretchers have been designed with the ever growing population in mind. It is slightly larger all round and the section from the shoulders to the hips has been made parallel and the length has been increased by 10cm. The flat bed style of the Alpine lite stretchers gives excellent security for spinal injuries and makes the loading of the casualty much better than a basket type stretcher, allowing far more casualty care. All versions of the Alpine stretcher fold in half, ski to ski, to facilitate easy backpacking by one person, to reduce bulk on the carriers back and for economical storage. When the stretcher is opened to receive a casualty it is not reliant on the side locks to remain secure when in the horizontal position, however the locks are required when being used for vertical lifting, when sliding/sledging over edges or rough terrain. The mountain rescue (MR) stretcher has a ski pan set between the head end skis for ease of sliding over rough terrain and snow, but more importantly to protect the casualty s back from rocks etc. Also the ski sections have an added high grade polyethylene ski fixed to them as a protection for the alloy over rock, gravel or any other hard abrasive surface. ALPINE LITE STRETCHER The new Alpine stretchers have been designed with the ever growing population in mind. It is slightly larger all round as the section from the shoulders to the hips has been made parallel and the length has been increased by 10cm. The flat bed style of the Alpine stretchers gives excellent security for spinal injuries and makes the loading of the casualty much better than a basket type stretcher, allowing far more casualty care. All versions of the Alpine stretcher fold in half ski to ski to facilitate easy backpacking by one person, to reduce bulk on the carriers back and for economical storage. When the stretcher is opened to receive a casualty it is not reliant on the side locks to remain secure when in the horizontal position, however the locks are required when being used for vertical lifting, when sliding/ sledging over edges or rough terrain. The mountain rescue (MR) stretcher has a ski pan set between the head end skis for ease of sliding over rough terrain and snow but more importantly to protect the casualty s back from rocks etc. The Alpine can be split if required for long carries into casualty sites but due to the lightness of the stretcher this is not always necessary. ALPINE STEEL STRETCHER ALPINE CR (Civil Rescue) REF: ST001L ALPINE MR (Mountain Rescue) REF: ST002L ALPINE STRETCHER CR (Civil Rescue) REF: ST001 ALPINE STRETCHER MR (Mountain Rescue) REF: ST002 The stretchers can be split if required for long carries into casualty sites but due to the lightness of the stretcher this is not always necessary. Both stretchers come with casualty securing straps and lifting straps, (MR 2 metres, CR 1.2 metres) and these may be used for lifting, winching, carrying, sledging or as pulling straps. Both come with storage bag that has a single padded shoulder carrying strap and outside pouch for inspection record card. Both will accept the fitting of carrying handles but on the MR stretcher they come as standard. Both will accept the fitting of the SAR wheel and head protection canopy. These must be ordered separatley. Both Stretchers Conform To: EC Declaration Of Conformity 93/42/EEC concerning medical devices. Article 11 (5) and annex VII Class 1 devices. The stretcher has been lifted by the RAF in exercise with the Oldham Mountain Rescue Team and found to be no different in handling to that of the steel version. Both stretchers come with casualty securing straps and lifting straps, (MR 2 metres, CR 1.2 metres) and these may be used for lifting, winching, carrying, sledging or as pulling straps. Both come with storage bag that has a single padded shoulder carrying strap and outside pouch for inspection record card. Both will accept the fitting of carrying handles but on the MR stretcher they come as standard. Both will accept the fitting of the SAR wheel and head protection canopy. These must be ordered separatley. Both Stretchers Conform To: EC Declaration Of Conformity 93/42/EEC concerning medical devices. Article 11 (5) and annex VII Class 1 devices. STRETCHERS & ACCESSORIES Specifications: Alpine CR Lite Stretcher: 11kg Lifting straps: 1.2M kg Length open: 210cm Length folded: 105cm Max width: 60cm Runner depth: 9cm Stretcher depth: 12cm Powder Coated Silver Metallic Specifications: Alpine MR Lite Stretcher: 12.45kg Handles: 2.45kg Lifting straps: 2m kg Length open: 210cm Length folded: 105cm Max width: 60cm Runner depth 9cm Stretcher depth: 12cm Powder Coated Silver Metallic Specifications: Alpine CR Stretcher: 13.45kg Lifting straps: 1.75kg Length open: 2.1m Length folded: 1.05m Max width: 60cm Runner depth: 7cm Specifications: Alpine MR Stretcher: 15.02kg Handles: 3.42kg Lifting straps: 1.80kg Length open: 2.1m Length Folded: 1.05m Max width: 60cm Runner depth 7cm 50 51

27 Stretcher Lifting Slings STRETCHER LIFTING SLINGS Basket Stretcher Lifting Slings Alpine CR 1.2m Adjustable Stretcher Lifting Slings REF: ST007 Alpine MR 2m Adjustable Stretcher Lifting Slings REF: ST016 Basket stretcher 1.2m Adjustable Stretcher Lifting Slings REF: ST008 The Adjustable Stretcher Lifting Slings have been designed for rescue, therefore are not (PPE) personal protective equipment. They are adjustable liftings slings for use with stretchers in mountaineering, industrial rescue and helicopter winching. They can also be used for lifting and lowering in both horizontal and vertical positions. EVAC LIFTING SLING REF: ST021 The EVAC lifting slings have been designed for rescue and are made up of items conforming to the relevant standards for (PPE) personal protective equipment. They are for use with stretchers in mountaineering, industrial rescue and helicopter winching. They can be used in both horizontal and vertical positions. ALPINE STRETCHER WHEEL & HANDLES Steel Stretcher Wheel REF: ST004 Steel Stretcher Handles REF: ST014 Lite Stretcher Wheel REF: ST004L Lite Stretcher Handles REF: ST014L The wheel frame has been designed to be assembled quickly and easily by just slotting the foot end forks into the main front forks. The frame connects onto the stretcher bed frame in four places. The angle of the frame down to the wheel puts all the downward force onto the wheel axle as is normal with a bike. STRETCHERS & ACCESSORIES They can be used for side carrying, sledging slings, or used as front and back man carrying yolk/harness by connecting them to the stretcher handles. The Adjustable lifting Slings have been approved for lift by RAF SAR Force UK. Specifications: Alpine CR 1.2m Adjustable Stretcher Lifting Slings Tensile Strength of each Strap 11kN 2 Strap vertical lift = 22kN. 4 straps horizontal lift = 44kN All connections using Maillons EN362:05/Q & EN12275 Weight: 1.4kg The complete set is made up of 4 x 60cm twin eye lanyards, 4 steel oval karabiners and 2 medium and 1 large delta maillons. Each of the items can be used independently if needed. They come complete with their own equipment storage pouch. Our stretcher handles have been redesigned to improve the fitting system. They are now fitted using a screw making it eaiser to fit and to give more security. Adaptation kits can be bought to bring the older stretcher handles in line with the latest development. Specifications: Basket stretcher 1.2m Adjustable Lifting Slings Tensile Strength of each Strap 11kN 2 Strap vertical lift = 22kN 4 straps horizontal lift = 44kN Central connections: 3 x Maillons EN362:05/Q & EN Stretcher Connection: Extra large karabiner 40kN EN362 with a 48mm gate opening. Weight: 2.5kg Specifications: Alpine MR 2m Adjustable Stretcher Lifting Slings Tensile Strength of each Strap 11kN 2 Strap vertical lift = 22kN 4 straps horizontal lift = 44kN All connections using Maillons EN362:05/Q & EN12275 Weight: 1.6kg Specifications: Evac Lifting Sling Standards conforming to: Lanyards EN354, EN566, & EN795-B, Karabiner EN362 and Maillons EN362:05/Q & EN12275 Max length of each leg including connectors:73cm Weight Complete with connectors: 1.2kg Weight of Bag: 58g Standard Colour: Orange 52 53

28 QUADPOD & WINCH QUADPOD QUADPOD & WINCH REF: QU001 The Quadpod is a multi adjustable portable anchor. It was designed to supersede the tripod design to provide more stability and reliability during a rescue situation. The Quadpod is now being used all over the world by many rescue organisations, military units and the UK coastguard. The Quadpod can be used in many modes and gives greater access to areas that tripods or other devices cannot access. The head of the Quadpod has multi-connection points, and up to two legs can be disconnected for special uses or transportation. It has been found that the need to have a 2.3m - 2.5m centre height for confined space rescue is not necessary when using the Quadpod. The extraction of casualties in body splints/stretchers once partially extracted can be brought out the rest of the way at an angle giving more casualty care, room and stability. The Quadpod comes complete with leg straps and a storage bag. These products can also be purchased separately. Specifications: Quadpod Materials & Coatings: Legs: Aluminium powder coated Head: Stainless steel powder coated Eye bolts & pins: Stainless steel & mild steel nickel plated. Feet: Flexible studded rubber Straps: Polyester webbing, hooks steel nickel plated. Leg Adjustment: 10 holes on each leg Max height as Std pyramid: 2m Packed size in bag: 1.2M x 17cm dia Standard: EN 795-B WLL in a standard pyramid shape 500Kg. Weight: Quadpod: 12.8Kg Leg straps: 1.0Kg 54 55

29 WINCH REF: QW001 QUADPOD BAG REF: QU003 QUAD LEG STRAPS REF: QU002 QUADPOD & WINCH The winch has been made to fit in various positions on our Quadpod. It can also be used separatley from the Quadpod, however this would require training for the users. Our winch can be used with kernmantle rope size between mm. The lifting load is dependent on the type of rope and the number of turns on the capstan before fitting into the self tailing guide. The Quadpod bag comes as standard when ordering the Quadpod. The bag has an adjustable strap for carrying over the shoulder and has two storage compartments for straps, documents etc. The Quadpod leg straps come as standard when ordering the Quadpod. The straps are light to carry and pack into the bags side pouch. They are extremely fast to connect and have very fine adjustment. As a guide, using 11mm rope with two turns on the capstan, then a third turn placed onto the self tailing guide and into the gripping flange, the maximum load it will take is approx. 250kg. At this load the rope will start to slip in the gripping flange so as not to over load the system. One person can lift or lower two people easily. There should always be a safety back-up system in place and a rope lock on the main rope i.e. SAR Rocker. We strongly advise that users be trained in its many uses and learn about its physical strengths and weaknesses. Specifications: Winch Two Speed: 3 1 & 9 1. Separate handle Weight: 12.8Kg Complete with storage bag Materials: Winch: Stainless steel and brass Bracket: High grade alloy, pins in plated mild steel Specifications: Quadpod Bag Heavy duty PVC Side pouch for leg straps/documentation. Blue as standard Colour: Blue or Black Specifications: Quad Leg Straps Materials: Polyester webbing, mild steel plated buckle Plated hardened steel hooks Colour: Black or Orange Weight: 1kg per set of 4 Strength: 300kg each strap 56 57

30 HELMETS & ACCESSORIES HELMETS REF: HP004 The Master Helmet has been styled and produced by Rock in Italy. Industrial Helmet - EN397 On the Industrial helmet the ventilation holes are closed. The chinstrap is designed to open in case of collision: opening at 25 dan (according to european standard EN397 for safety helmets). The helmet meets the following optional requirements: lateral deformation and low temperature use (-30 C). The helmet is provided with clips for fixing a headlamp. It is suitable for all types of work at height and for industrial use. Mountaineering Helmet - EN12492 This helmet has a new UP/DOWN adjustable size system for better fitting and comfort. Headband covered with anallergic textile. The helmet is provided with clips for fixing a headlamp. This helmet has been designed for canyoning, mountaineering, ice climbing, caving & sport climbing. It is also suitable for school camps and adventure parks. GROUND SPIDER Ground Spider REF: RS007 The Ground Spider is made from a high specification alloy bar and each spike inter-folds along the main bar for storage and stops the spike from damaging other equipment or causing injury. The Ground Spider comes with its own storage bag made from heavy duty nylon cordura. Each leg is linked using a 18mm x 60cm round sling and a medium delta maillon both of which conform to the relevant EN standards. All the items are in black and pack away to an approximate size of 40cm long and 7cm in diameter, tapering to 4cm. There is no formal test procedure or standard for this item, however it has been load tested to 15kN and it held for three minutes as required in most EN standards. Users must be competent and trained and fully understand how it holds on different types of ground. HELMETS & ACCESSORIES Specifications: Helmets Both helmets are available with anti-scractch clear visor (small or large) on request. Industrial Helmet: External shell: ABS (Acrylonitrile Butadiene Styrene). Internal shell: High density polystyrene (EPS) Size: Unisize 54/62 cm Side Clips for head lamp elastic Weight: 400g Mountaineering Helmet: External shell: ABS (Acrylonitrile Butadiene Styrene). Internal shell: High density polystyrene (EPS) Size: Unisize 54/62 cm Side Clips for head lamp elastic Weight: 395g Specifications: Ground Spider Material: Main bars, aluminium powder coated Sling: Superweb polyester Maillon: Steel plated Bag: Nylon cordura Colour: Black Leg length: 3 x 33cm and 2 x 26cm Spike length: 5 x 15cm Sling: 60cm Circ. x 18mm superweb EN354, EN566 & EN795-B Delta maillon: 8mm EN362:05/Q & Weight: 832g Strength: Lab test only, 15kN 58 59

31 RIGGING PLATES Small REF: RS015 Medium REF: RS016 Large REF: RS017 ROPE GLOVES REF: RS011 FOOT LOOPS Single REF: RS012 Twin REF: RS013 5 RUNG ETRIER 5 Rung Etrier REF: RS014 HELMETS & ACCESSORIES Rigging plates were developed for putting multiple connections into one point or anchor. They are to help clean up a system of multi connections and to help stop twist from karabiner to karabiner. They are increasing in popularity with Fire & Rescue rope teams, avaliable in three sizes, small, medium, and large. Our technical rope gloves have been designed with the user in mind and not just as an abseiling glove. Normal abseiling gloves are thick, stiff, bulky and heavy. Our glove can be worn and used as a general purpose glove. With its cut off thumb and first finger it can be used on jobs that require fingertip control. Our single & twin foot loops are fully adjustable using an alloy grip tight buckle, 25mm hard wearing polyester web and a reinforced foot loop. The 5 Rung Etrier is made from our 18mm superweb. It comes with its own storage bag that can be connected to your harness when not in use. This is not for use as PPE (Personal Protective Equipment) as there is no standard for this type of product. You must always use a separate sling or rope as your safety. Specifications: Small Rigging Plate Material: Anodised high strength aircraft alloy Minimum breaking load: 36kN Weight: 93g Hole: 20mm Length: 91mm Width: 84mm Specifications: Medium Rigging Plate Material: Anodised high strength aircraft alloy Minimum breaking load: 40kN Weight: 219g Hole: 20mm Length: 160mm Width: 100mm Specifications: Large Rigging Plate Material: Anodised high strength aircraft alloy Minimum breaking load: 45kN Weight: 442g Hole: 20mm Length: 249mm Width: 150mm Specifications: Rope Gloves Sizes: Medium, Large, XXLarge Weights: Medium - 70g Large - 76g XXLarge - 84g Specifications: Foot Loops Specifications: 5 Rung Etrier Max working length 1.75m Min working length 45cm Weight of single 154g Weight of double 194g Max working length 175cm Min working length 45cm Weight of single 190g 60 61