Powered Platform Safety
|
|
- Muriel Reeves
- 5 years ago
- Views:
Transcription
1 Powered Platform Safety
2 Session Objectives You will be able to: Identify powered platform components Recognize platform safety features Understand inspection requirements Use personal fall arrest systems properly Follow safe work practices Act effectively in an emergency
3 Building Owner Certification Equipment must meet OSHA design safety criteria Equipment must be tested, inspected, and maintained Equipment must be certified by owner
4 Suspension Systems Transportable outriggers Davits, groundor roof-rigged systems Carriages for horizontal movement
5 Stabilization Systems Continuous Intermittent Button guided Angled roping Alternative
6 Hoisting Machines Hoisting machines must: Have a primary brake Have a secondary or emergency brake Be able to handle 125% of rated load Be able to stop overspeed descent Have moving parts and pinch points guarded
7 Requirements: Platform Installation Safe access for equipment maintenance Protective perimeter guardrail Dedicated, separate electrical power Lockable power disconnect switch
8 Load Capacity Design Capable of 4 times maximum load Hold 250 pounds per platform occupant Withstand 50 mph winds Connections able to handle vibration Load rating plate visible
9 Platform Safety Features 2 feet wide Slip-resistant floors Fire extinguisher Tool and material storage
10 Platform Safety Features (cont.) Operating controls on platform Maximum rated speeds Safety access ways Vertical lifelines for each occupant
11 Guardrails Working platforms Roofs and access ways Top rails Midrails Toe board
12 Safety Features: Multiple Choice 1. What information is on the load rating plate? a. Manufacturer information b. Load limit c. Type of fuel used 2. Where are the emergency stops located? 3. How many vertical lifelines must be provided on a platform? a. At either end of the platform b. Floor of platform c. On the rails a. Maximum of four b. One for each worker on the platform c. At least two
13 Safety Features Do you understand: Suspension and stabilization systems? Hoisting machines? Platform installations? Load capacity and design? Platform safety features?
14 Equipment Inspections Inspection by a competent person Daily visual inspection Monthly maintenance and wire rope inspection Thorough annual inspection Inspection of system after any incident Certified records
15 Annual Inspections Building support structures All platform components Hoist control systems Parts subject to wear
16 Wire Suspension Rope Inspections Distortion, such as kinks Evidence of heat damage Deterioration from corrosion Noticeable rusting or pitting More than one broken wire
17 Daily Inspections Learn to identify key safety elements Report any damage Inspect governors and secondary brakes Perform a hoist test Test controls and emergency stops Look for visible defects
18 Personal Fall Arrest Systems Wear when on or around powered platforms Attach lanyard to center of back Use one lifeline per worker Properly tie off Check potential fall path
19 Personal Fall Arrest Systems (cont.) Protect lanyards from damage Inspect daily Do not use defective equipment Know how to use your personal fall arrest system Understand rescue procedures
20 Safe Work Practices DON T Overload platforms Work on platform with a slippery floor Carry flammable liquids on platforms Operate platform in bad weather DO Protect platforms from corrosives or heatproducing processes
21 Safe Work Practices (cont.) Mount a wind-measuring anemometer to platform Don t let tools, materials, debris accumulate Keep stabilizer ties untangled Maintain voice communication Lock power disconnect on
22 Emergency Plans Written plan and employee training Emergency electrical operating device Rescue operations Communications
23 Emergency Plans (cont.) Emergency alarms Emergency escape routes
24 Safety Procedures: True or False? Platforms need only be inspected once a year. You shouldn t work on a platform with a slippery floor. It s safe to carry flammable liquids on platforms if there s a fire extinguisher. You should maintain voice communication with someone in the building while working on a powered platform.
25 Safety Procedures Do you understand: Inspection requirements and procedures? Proper use of personal fall arrest systems? Safe work practices? Emergency procedures?
26 Learn about powered platform hazards and safety features Inspect equipment before each use Follow safe work practices Use the personal fall arrest system Learn emergency procedures
27 Questions
28 Acknowledgement I, have completed the Powered Platform Safety training. (Print Name) Date: Please print the acknowledgement sheet, fill in requested information and deliver to Facilities administrative office.
Fall Protection. Fall Speed vs. Reaction Time. Good body reaction time = 0.5 seconds Travel distance in 0.5 seconds = 4 feet (1.21mts.
Fall Protection Fall Speed vs. Reaction Time Good body reaction time = 0.5 seconds Travel distance in 0.5 seconds = 4 feet (1.21mts.) In 1 second your body will fall 16 feet (4.8 mts.) By the time you
More informationFall Speed vs. Reaction Time
Fall Protection Fall Speed vs. Reaction Time Good body reaction time = 0.5 seconds Travel distance in 0.5 seconds = 4 feet (1.21mts.) In 1 second your body will fall 16 feet (4.8 mts.) By the time you
More informationOverview. Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used
FALL PROTECTION Overview Identify fall hazardous areas Describing potential fall hazards How appropriate portable and extension ladders are used Fall Protection All situations that expose personnel to
More informationDREW UNIVERSITY FALL PROTECTION PROCEDURE (DRAFT 12/11)
PURPOSE The objective of this policy & guideline is to eliminate the potential for injuries and fatalities to employees and contractors resulting from falls from elevated work areas at Drew University
More informationFall Protection Checklist. Guardrail System
Fall Protection Checklist Location/Department: Date of Inspection: Inspectors: Corrective Actions: Work order/memos were issued: Yes No Date issued: In accordance with the MIOSHA and OSHA standards the
More informationRisk Control at United Fire Group
In the United States, falls are the leading cause of fatalities on a construction site. Employers and employees need to do the following: Where protection is required, select fall protection systems appropriate
More information8. Fall Protection Procedures WAC
1.0 Fall Protection Introduction 8. Fall Protection Procedures WAC 296-155-245 If an employee is exposed to a fall hazard of ten (10) feet or more in height, the employee must use a fall restraint, fall
More informationFALL PROTECTION PLAN FALL PROTECTION PROGRAM
FALL PROTECTION PLAN IMPORTANT: This document is intended to provide guidance only for developing site-specific fall protection plans for working at heights. FALL PROTECTION PLAN IMPORTANT: This document
More informationSection 16B. Fall Protection. Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents:
Section 16B. Fall Protection Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents: 1. Personal factors Lack of concentration. Use of medication. Poor
More informationDecember 2012 Safety Meeting. Fall Protection Answer Key 1. B 2. B 3. D 4. B 5. D 6. C 7. A 8. C 9. D 10. A KEY-SM-FALLPROT V.A.0.
Fall Protection Answer Key December 2012 Safety Meeting Below is the answer key for the quiz. 1. B 2. B 3. D 4. B 5. D 6. C 7. A 8. C 9. D 10. A KEY-SM-FALLPROT Fall Protection 1 Introduction to Fall Protection
More informationARKANSAS TECH UNIVERSITY FACILITIES MANAGMENT HEALTH AND SAFETY MANUAL
FALL PROTECTION (PERSONAL FALL ARREST SYSTEMS) 15.0 The purpose of this policy is to specify procedures and training for the safety of the employees in the Facilities Management Group while working on
More informationKey provisions of OSHA's new rule on walking/working surfaces, fall protection
ARTICLES CASES Key provisions of OSHA's new rule on walking/working surfaces, fall protection Although an overwhelming majority of general industry accidents stem from slips, trips and falls, Subpart D
More informationWhat is fall protection?
Fall Protection Training Objective After the lecture, attendees will be able to identify fall protection equipment by understanding the ABC principle to a satisfactory level. What is fall protection? Fall
More informationFall Protection and Elevated Work
Program No: SP-010 Page 1 1.0 PURPOSE AND INTRODUCTION Fall Protection and Elevated Work To establish fall protection safety procedures for Pitt County Schools employees engaged in any of the following
More informationFall Protection Resource Guide P AGE 1
Fall Protection Resource Guide P AGE 1 As a Home Builder, we do not self-perform any work. This section is a resource guide only and is not intended to put any requirements on the company. All subcontractors,
More information??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls.
Intent??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls. Fall Protection is an integral part of our commitment to a safe work
More informationApplying Construction Fall Protection Concepts to General Industry
Applying Construction Fall Protection Concepts to General Industry Applying Construction Fall Protection Concepts to General Industry Michael Tesmer, CSP and David Jewell, CSP Conney Safety Products This
More informationFall Hazards at Walking and Working Surfaces What You Need to Know. Presented by PENTA Engineering Group, Inc. August 2017
Fall Hazards at Walking and Working Surfaces What You Need to Know Presented by PENTA Engineering Group, Inc. August 2017 Presenters Christopher M. Everett, PE President ceverett@pentaeng.com Michael J.
More informationFall Protection PPT-SM-FALLPROT V.A.0.0
Fall Protection 1 Introduction to Fall Protection Falls account for 13% of fatal injuries 11% of these fatal falls were to a lower level Workers may be required to perform tasks at great heights which
More informationAppendix C Fall Protection Hazard Assessment and Rescue Plan
Appendix C Fall Protection Hazard Assessment and Rescue Plan Department: Address: Jobsite Location: Date Prepared/Modified: Plan Prepared by: Signature: Plan Approved By: Signature: Plan Supervised by:
More informationFall Protection ABC s
Fall Protection ABC s Chris Caron American Safety & Supply, Inc. Fall Protection ABC Itinerary Review types of fall arrest systems Review and discuss ladder safety Discuss the various components of fall
More informationWalking-Working Surfaces Fall Protection Program
Purpose Walking-Working Surfaces Fall Protection Program The purpose of this program is to provide procedures to eliminate, prevent, and control hazards from falls from heights. Scope This program is applicable
More informationFall Protection- Part 2
Optional Information Name of School: Date of Inspection: Vocational Program/Course/Room: Signature of Inspector: Fall Protection- Part 2 Self Inspection Checklist Instructions: This checklist covers fall
More informationThe purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field.
Purpose The purpose of this training is to give field technicians awareness training and guidelines on potential hazards they may encounter in the field. Fall Protection and Prevention JELD-WEN Field Employees
More information1.0 Scope and Application
1.0 Scope and Application This policy contains safety requirements to protect employees from falls of six (6) feet or more when performing elevated work except on ladders and scaffolding (See Ladders and
More informationSubchapter 4. Construction Safety Orders Article 24. Fall Protection. Return to index New query
This information is provided free of charge by the Department of Industrial Relations from its web site at www.dir.ca.gov. These regulations are for the convenience of the user and no representation or
More informationSubpart F Powered Platforms, Manlifts, and Vehicle-Mounted Work Platforms
Occupational Safety and Health Admin., Labor 1910.66 After the desired degree of evacuation is completed, the wardens should be able to account for or otherwise verify that all employees are in the safe
More informationWhy Update. OSHA updated Walking Working Standard. Who & What it Covers. Housekeeping (a) 6/25/ nd Leading cause of Workplace fatalities
OSHA updated Walking Working Standard Why Update 2nd Leading cause of Workplace fatalities $70 Billion Workers Comp Cost - US 100+ Million lost workdays/year - US Cari Gray, CSP Safety Consultant Ohio
More informationAES Raptor, LLC Raptor R1000 Instruction Manual
AES Raptor, LLC Raptor R1000 Instruction Manual Published by AES Raptor, LLC, North Kansas City, MO AES RAPTOR COMPLETE MOBILE FALL PROTECTION SYSTEM is a registered trademark of Architectural Exterior
More informationRegion: USA Language: EN Number : TB0031 Revision : B. Total Page: 3 Page n : 1 First Issue: 10/2014 Rev. Date: 10/08/2014
Subject Dropped Object Protection Region: USA Language: EN Number : TB0031 Revision : B Total Page: 3 Page n : 1 First Issue: 10/2014 Rev. Date: 10/08/2014 Some users of fall protection equipment require
More informationSECTION FACILITY FALL PROTECTION PART I - GENERAL
SECTION 11 24 29 - FACILITY FALL PROTECTION PART I - GENERAL 1.1 The Illinois Department of Labor (IDOL) regulates fall protection for general industry and construction in the public sector under the Illinois
More informationUser Instructions 1790 Rail Anchor
User Instructions 1790 Rail Anchor This document is intended to meet the Manufacturer s Instruction requirements as stated by ANSI Z359.1, and should be used as part of an employee training program as
More informationROOFING FALL PROTECTION 27.I
ROOFING FALL PROTECTION 27.I Prior to the start of work, a structural analysis of the roof shall be conducted by a Qualified Person to assure that the load capacity of the roof deck will not be exceed.
More informationWritten Program. For. Fall Protection. <<Company Name>> <<911 Address>> <<City, state, zip code>>
Written Program For Fall Protection Table of Contents Purpose.. Page 1 Policy.. Page 1 Definitions. Page 1 Fall Protection Program Responsibilities
More informationTitle- Fall Protection Effective Date: 03 Jan 14 Revision-0
Whaley Steel Corp Environment, Health & Safety Manual Section-3.0 Title- Fall Protection Effective Date: 03 Jan 14 Revision-0 1.0 PURPOSE 1.1 The purpose of the fall protection program is to: ensure all
More informationFALL PROTECTION / ELEVATED WORK
SEPTEMBER CORE REFRESHER HSE TOOL BOX FALL PROTECTION / ELEVATED WORK FALL PROTECTION Falls from elevations are one of the most common causes of death in this industry. OSHA requires fall protection when
More informationWalking-Working Surfaces and Fall Protection Standards Update. OSHA General Industry
Walking-Working Surfaces and Fall Protection Standards Update OSHA General Industry Background Slips, trips, and falls account for a majority of all general industry injury incidents. Caused 849 workplace
More informationFALL PROTECTION PLAN July 2012
FALL PROTECTION PLAN July 2012 Office of Police and Safety (423)323.0255 Introduction In the construction industry in the United States, falls are the leading cause of worker fatalities. Each year, on
More informationProgressive Safety Services LLC
1910.23 Guarding Floor and Wall Openings and Holes 1910.66 Powered Platforms, Manlifts and Vehicle Mounted Work Platforms. 1926.500 Fall Protection 1926.501 Duty to Have Fall Protection 1926.502 Fall Protection
More informationFigure 1 - Parts Identification. Copyright 2002, DB Industries, Inc.
User Instruction Manual Zorbit Energy Absorber Kits for Horizontal Lifeline Systems This manual is provided as the Maunfacturer s Instructions, and should be used as part of an employee training program
More informationSubparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule
Subparts D and I Walking-Working Surfaces & Personal Protective Equipment Final Rule OSHA s Mission To Assure So Far as Possible Every Working Man and Woman in the Nation Safe and Healthful Working Conditions...
More informationFALL PROTECTION COMPARISON BETWEEN VARIOUS OSHA STANDARDS, NAVY and EM 385 (2008) REQUIREMENTS
Requirements FALL PROTECTION COMPARISON BETWEEN VARIOUS OSHA STANDARDS, NAVY and EM 385 (2008) REQUIREMENTS Navy FP Chapter 13 of OPNAVINST 5100.23G (2005) and Fall Protection Guide for Ashore Facilities
More informationWalking-Working Surfaces
Walking-Working Surfaces 29 CFR 1910, Subpart D Presented by: Chesapeake Region Safety Council Rod Markley, CSP, CHST, CET Subpart D - Walking-Working Surface Topics we will cover: Background of rule Overview
More informationGEMTOR. ... when your life is on the line OWNER'S MANUAL. FLW Series Self-Retracting Lanyard/Fall Limiter
GEMTOR TM... when your life is on the line OWNER'S MANUAL FLW Series Self-Retracting Lanyard/Fall Limiter Installation, Operating, Inspection and Maintenance Instructions Warning You must read and fully
More informationFALL PROTECTION PROGRAM
FALL PROTECTION PROGRAM 1.0 PURPOSE: The Indiana University (IU) is to: 1.1 Protect Indiana University employees from injuries associated with falls 1.2 Inform Indiana University employees of the hazards
More informationFREQUENTLY ASKED QUESTIONS ABOUT FALL PROTECTION
FREQUENTLY ASKED QUESTIONS ABOUT FALL PROTECTION What s the difference between polyester and nylon webbing in harnesses and lanyards? Nylon (polyamide) and polyester are both synthetic products with very
More informationEffective Date: 10-January Table of Contents
Version: 4 Page: 1 of 10 Table of Contents 1.0 Introduction... 2 1.1 Purpose... 2 1.2 Scope... 2 1.3 Definitions... 2 1.4 Responsibilities... 4 Environmental Health and Safety Office (EHSO)... 4 Directors,
More informationFigure 1 - Cable Grip Horizontal Lifeline Termination ZORBIT ENERGY ABSORBER RELEASE TAB
Instructions for the following series products: Cable Grip (See back pages for specific model numbers.) User Instruction Manual Cable Grip Kit for Horizontal Lifeline Systems This manual is provided as
More informationFall Protection. 29 CFR Appendix C 29 CFR 1926 Subpart M
Fall Protection 29 CFR 1910.66 Appendix C 29 CFR 1926 Subpart M Duty to Have Fall Protection Provide fall protection systems which meet the criteria of 1926 and 1910 Make fall protection an integral part
More informationSummary of Advantages and Disadvantages of Rope Access Techniques
WJE ADVISORY: MARCH 2018 Summary of Advantages and Disadvantages of Rope Access Techniques The following is a brief summary of advantages and disadvantages of using rope access techniques to access the
More informationCompetent Person - Fall Protection Presented by Turner Safety- your instructor is Steve Turner
Competent Person - Fall Protection Presented by Turner Safety- your instructor is Steve Turner 1 Falls in Construction Falls are the leading cause of deaths in the construction industry. Most fatalities
More informationUser Instruction Manual Fixed Beam Anchor
Instructions for the following series products: FIXED BEAM ANCHOR Model Numbers: The Ultimate in Fall Protection 2108406 2108407 2108408 2108409 2108410 2108411 User Instruction Manual Fixed Beam Anchor
More informationFall Protection Training
Fall Protection Training Reference: OSHA 29CFR 1910 OSHA 29CFR 1926 ANSI Z359.1-1992 (R1999) Introduction Deaths occurring from falls during 1996 increased five percent over 1995 figures. This accounts
More informationFall Protection University Facilities Internal Procedure: July 1, 2013 Effective date: July 1, 2013 Last Modified: April 2013 Approved by: Bob Wells
Fall Protection University Facilities Internal Procedure: July 1, 2013 Effective date: July 1, 2013 Last Modified: April 2013 Approved by: Bob Wells 1.0 Program Objective UF has adopted this policy to
More informationFall Protection Refresher Orientation. Fall Protection Refresher Orientation 1
Fall Protection Refresher Orientation Fall Protection Refresher Orientation 1 Course Objectives! Understand the definitions of fall prevention, fall restraint, and fall arrest.! Understand the requirements
More informationFALL PROTECTION CODE OF PRACTICE
FALL PROTECTION CODE OF PRACTICE This guide can help you comply with Section 50.2 of the General Regulation 91-191. NOTE: Not for use when a safety monitor is part of the fall protection system on a work
More informationVERSION 1.0 FEBRUARY 1, 2017 FALL PROTECTION AND ELEVATED WORK UNC CHARLOTTE 9201 UNIVERSITY CITY BLVD., CHARLOTTE, NC 28223
VERSION 1.0 FEBRUARY 1, 2017 FALL PROTECTION AND ELEVATED WORK UNC CHARLOTTE 9201 UNIVERSITY CITY BLVD., CHARLOTTE, NC 28223 Table of Contents I. Purpose... 3 II. Scope... 3 III. Program Responsibilities...
More informationF a l l P r o t e c t i o n E x p e r t s. Subject: Use of Rope Grabs in Flat or Sloped Roof Applications
No. RG001, Rev. B Subject: Use of Rope Grabs in Flat or Sloped Roof Applications The use of DBI/SALA Rope Grabs (model 5001441, 5001442) on flat or sloped roofs are acceptable as a means of fall protection
More informationAt the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest.
0 At the end of this presentation you should know the difference between fall prevention, fall restraint, and fall arrest. We will review the hazards associated with fall protection and how to mitigate
More informationPatrick Harel Ph
Patrick Harel Ph- 920-418-2714 pharel@capitalsafety.com The Worldwide Experts in Fall Protection Standards Occupational Safety and Health Administration (OSHA) 29 CFR 1910 and 1926 Governing Body Sets
More informationNew Walking-Working Surfaces and PPE (Fall Protection) Rule. Purpose of the New Rule
New Walking-Working Surfaces and PPE (Fall Protection) Rule John Olaechea Compliance Assistance Specialist OSHA Region VIII 1244 Speer Blvd Suite 551 Denver, CO 80204 720-264-6586 olaechea.john@dol.gov
More informationFall Protection STANDARD PROCEDURE INSTRUCTION. Fall Protection. Title SPI. Department. Supersedes SPI Dated. Jan 19, 2016.
STANDARD PROCEDURE INSTRUCTION Title Fall Protection Department Safety, Health and Environment Supersedes SPI Dated March 27, 2014 SPI 34-21 Effective Date Jan 19, 2016 Fall Protection SPI 34-21 Page 1
More informationOperating instructions. Bolt-on Bar Joist Anchorage
Reliance Industries, LLC Operating instructions for the Bolt-on Bar Joist Anchorage Model # 3072 Reliance Industries, LLC PO Box 140008 Denver, CO 80214 Ph. (800) 488-5751 Ph. (303) 424-8650 Fax (303)
More informationOPE Training Seminar Agenda
OPE Training Seminar Agenda Basics -OSHA - Industry Symbols - A,B,C s - Types of OPE Systems - Selection of an OPE System - Inspection & Maintenance - Safety Tips (OSHA) OCCUPATION SAFETY AND HEALTH ADMINISTRATION
More informationReliance Industries, LLC Operating instructions for the / Bolt-on D-Ring Anchorage. Model # 3071
Reliance Industries, LLC Operating instructions for the 3071-1 / 3071-2 Bolt-on D-Ring Anchorage Model # 3071 Reliance Industries, LLC PO Box 140008 Denver, CO 80214 Ph. (800) 488-5751 Ph. (303) 424-8650
More informationWalking and Working Surfaces: Comprehensive Training
Walking and Working Surfaces: Comprehensive Training PROGRAM SYNOPSIS: To ensure workers are provided with safe working and traveling surfaces, OSHA has developed and recently updated its regulation 29
More informationFALL PROTECTION GUIDELINE
FALL PROTECTION GUIDELINE July 2001 Table of Contents INTRODUCTION...3 CONTROL MEASURES...4 SURFACE PROTECTION...4 FIXED BARRIERS...5 EXAMPLES OF GUARDRAIL...6 WARNING BARRIERS...7 HANDRAILS...8 SURFACE
More informationFall Protection / Open Holes & Guardrail
Fall Protection / Open Holes & Guardrail 1. Leading Edges Policy Statement It is GW Communications policy that any worker exposed to a fall 6 or greater, shall be protected from coming into contact with
More informationFALL PROTECTION WORK PLAN (Alstom Power Installation Canada)
FALL PROTECTION WORK PLAN (Alstom Power Installation Canada) Location: Unit: Foreman: Task: Supervisors Ensure: Workers must review and sign this fall protection work plan prior to starting work in an
More informationFALL PROTECTION. Leader s Guide. Marcom Group Ltd.
1818 FALL PROTECTION Leader s Guide Marcom Group Ltd. Structure and Organization Information in this program is presented in a definite order, so that employees will see the relationships between the various
More informationThis information has been developed by an OSHA Compliance Assistance Specialist and is intended to assist employers, workers, and others as they
New Walking-Working Surfaces and PPE (Fall Protection) Rule Disclaimer This information has been developed by an OSHA Compliance Assistance Specialist and is intended to assist employers, workers, and
More information"FALL PROTECTION IN CONSTRUCTION ENVIRONMENTS"
MAJOR PROGRAM POINTS "FALL PROTECTION IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
More informationAre You OSHA Compliant? Browse Our Products Specifically For Compliance With The Updated Walking-Working Surfaces and Fall Protection Standard.
Are You OSHA Compliant? Browse Our Products Specifically For Compliance With The Updated Walking-Working Surfaces and Fall Protection Standard. OSHA s Walking-Working Surfaces and Fall Protection Standard
More informationOSHA s new walking working surfaces standards
OSHA s new walking working surfaces standards changes and new requirements Inspection of walking working surfaces 1910.22(d) Regularly and as needed and correct, repair, or guard against hazardous conditions;
More informationReviewed: New Effective: 5/18/12 Supersedes: New Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene
Procedure No.: BC032.027 Page: 1 of 15 Preparer: Owner: Approver: Team Member, Occupational Safety Industrial Hygiene Manager, Occupational Safety Industrial Hygiene Vice President, Ecology & Safety (Signature
More informationSafe Work Practices (SWP) SWP (6) FALL PROTECTION PROGRAM
SWP (6) FALL PROTECTION PROGRAM The following information on Fall Protection has been based around the BC OHS Regulations, standards, policies and guidelines. Prior to starting work outside of BC, the
More informationPart #: 15158; 15159; 15188; 61027; 61029; 61140; 61141
Product Name: Guardrail Receivers Part #: 15158; 15159; 15188; 61027; 61029; 61140; 61141 Instruction Manual Do not throw away these instructions! Read and understand these instructions before using equipment!
More informationDoc No: FPP CARDINAL SURVEYS COMPANY. Safety Management System. Initial Revision Date: Version Revision No. 02 FALL PROTECTION
Revision Preparation: Safety Mgr Authority: President Issuing Dept: Safety Page: Page 1 of 10 Purpose The purpose of this program is to provide fall protection procedures to prevent injury to employees
More informationDO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT!
Guardian C-Slab Grabber Part #: 15500 USER S MANUAL DO NOT THROW AWAY THESE INSTRUCTIONS! READ AND UNDERSTAND BEFORE USING EQUIPMENT! TABLE OF CONTENTS: INTRODUCTION... Page 2 USER INFORMATION... Page
More informationDepartment of Facilities Management. Occupational Health and Safety. Fall Protection Program
Department of Facilities Management Occupational Health and Safety Fall Protection Program October 2016 1 1.0 INTRODUCTION This program has been developed to provide guidance to those managers and supervisors
More informationRetractable. Dual Leg. User Instructions. 3M Occupational Health and Environmental Safety. Fall Protection Equipment
3M Occupational Health and Environmental Safety Fall Protection Equipment Dual Leg Retractable User Instructions User Instructions for the 3M TM Dual Leg Retractable Important: Keep these User Instructions
More informationUser Instructions 1789 Parapet Wall Anchor
User Instructions 1789 Parapet Wall Anchor This manual is intended to meet the Manufacturer Instructions as required by ANSI Z359.1 and should be used as part of an employee training program as required
More informationImhoff Custom Services Inc.
Imhoff Custom Services Inc. Fall Protection Program Falls are the leading cause of deaths in construction situations and account for about one third of all fatalities. These falls and deaths involve a
More informationNEW FALL PROTECTION LEGISLATION. Presented by Michael McGovern, Roland Roy
NEW FALL PROTECTION LEGISLATION Presented by Michael McGovern, Roland Roy INTRODUCTION WHY ARE CHANGES BEING MADE? The Provincial Government has brought in changes to the fall protection requirements in
More informationSPIDER BASKET ST-17 Rev
SPIDER BASKET ST-17 Rev 3-8-2017 TOPICS Specifications Components Inspection Job Preparation Operating Instructions Lifeline & Rope Grab Rigging Lift Plan Regulations Dimensions Specifications Model: ST-17
More informationFall Protection Program
Fall Protection Program 135 College Street, Suite 100, New Haven, CT 06510 Telephone: 203-785-3550 / Fax: 203-785-7588 ehs.yale.edu 6/26/2018 CONTENTS: 1. Introduction... 3 2. Responsibilities... 3 A.
More informationFall Protection Plan Environmental Health & Safety Office September 2017
September 2017 Table of Contents Tables and Figures... iii Foreword... v Document History... v 1.0 Introduction... 1 1.1 Purpose... 1 1.2 Scope... 1 1.3 Exceptions... 1 2.0 Roles and Responsibilities...
More informationINSTRUCTIONS FOR USE
INSTRUCTIONS FOR USE 7100 Series Lanyards Complies with the current ANSI Z359.1-2007 and all applicable OSHA regulations and requirements. Reliance Industries P.O. Box 2046 Deer Park, TX 77536 Phone :
More informationFall Protection Program
Page 1 of 13 Sect: 1.0 Purpose The purpose of the fall protection program is to: o Ensure all work areas are free from uncontrolled fall hazards. o Ensure all employees are properly trained in fall prevention
More informationFALL PROTECTION POLICY
I. PURPOSE Effective: October 1, 2007 Revised: October 20, 2010 The purpose of this policy is to provide fall protection procedures and prevent injuries due to falls. This policy is intended to comply
More informationProduct Name: Universal Guardrail Post
Dist. by: BEST MATERIALS Ph: 800-474-7570 www.bestmaterials.com Email: Sales@BestMaterials.com Product Name: Universal Guardrail Post Part #: 61133; 61135; 61136 Instruction Manual Do not throw away these
More informationFall Protection Program
Fall Protection Program Prepared by: The Ohio State University Environmental Health and Safety Occupational Safety & Industrial Hygiene 1314 Kinnear Road Columbus, OH 43212-1168 614-292-1284 Phone 614-292-6404
More informationIMO INSPECTION AND SURVEY REQUIREMENTS FOR ACCOMMODATION LADDERS. Proposal for an amendment to SOLAS and associated guidelines
INTERNATIONAL MARITIME ORGANIZATION E IMO SUB-COMMITTEE ON SHIP DESIGN AND EQUIPMENT 50th session Agenda item 5 DE 50/WP.8 7 March 2007 Original: ENGLISH INSPECTION AND SURVEY REQUIREMENTS FOR ACCOMMODATION
More informationFigure 1 - Parts Identification
Instructions for the following series products: Zorbit Energy Absorber Kits (See back page for specific model numbers.) User Instruction Manual Zorbit Energy Absorber Kits for Horizontal Lifeline Systems
More informationFALL PROTECTION PLAN
FALL PROTECTION PLAN CPWR The Center for Construction Research and Training created this document as part of the National Campaign to Prevent Falls in Construction to provide companies with guidance on
More informationFall Protection Introduction
Fall Protection Introduction Date: District: Site: Time: Department: Manager/Supervisor Name: In 1995, 1,048 construction workers died on the job, with 32 percent, or 335 of them, resulting from falls.
More informationSummit Anchor Company, Inc.
Summit Anchor Company, Inc. Safety From The Top Down Roof and Wall Safety/Tie-Back Anchors Suspended Access Systems and Fall Protection Overview United States and Canadian national safety standards require
More informationCPWR - The Center for Construction Research and Training. Fall Hazard Identification and Control Audit of the Aria Building. City Center Project
CPWR - The Center for Construction Research and Training Fall Hazard Identification and Control Audit of the Aria Building City Center Project Las Vegas, Nevada September, 2008 Submitted by Mark Fullen
More informationINSTRUCTIONS FOR USE
Rebar Chain Assembly INSTRUCTIONS FOR USE 7260XX Rebar Chain Assembly Complies with the current ANSI Z359.1-2007 and all applicable OSHA regulations and requirements. Reliance Industries P.O. Box 2046
More informationFall Protection. Fall Prevention. vs. Sam Carbis Solutions Group. Solutions for Workplace Safety
Fall Protection vs. Fall Prevention Solutions for Workplace Safety Risks are inherent in the activities we perform every day whether driving, flying, walking, or working. Every job has its risks although
More information