Sr. No. ITEM DESCRIPTION Model: SIZE FALL PROTECTION. PN 06 SAFETY BELT with 3 mtr. PP Lanyard & Hook PN 101

Transcription

1 Sr. No. ITEM DESCRIPTION Model: SIZE FALL PROTECTION 1 PN 06 SAFETY BELT with 3 mtr. PP Lanyard & Hook PN 101 KARAM MAKE PN-06 SINGLE LANYARD HALF BODY SAFETY BELT 2 ISI MARKED IS3521: 1999 FULL BODY HARNESS PN-16 KARAM make Full Body harness CLASS A with 3 mtr PP SINGLE Lanyard & Hook PN 121 (Snap Hook). ISI-IS 3521:1999 KARAM MAKE PN-16 SINGLE LANYARD SNAP HOOK 3 FULL BODY HARNESS PN-16 KARAM make Full Body harness CLASS A with 2 mtr PP Double Lanyard & Hook PN 121 (Snap Hook). ISI-IS 3521:1999 KARAM MAKE PN-16 Double LANYARD SNAP HOOK 4 FULL BODY HARNESS PN-16 KARAM make Full Body harness CLASS A with 2 mtr PP Double Lanyard & Hook PN 131 (Scaffold Hook). ISI-IS 3521:1999 KARAM MAKE PN-16 Double LANYARD SCAFFHOLD HOOK PN 2000A 5 FALL ARRESTER WITH HOOK PN 112 (C), FOR ROPE PN 2000A PN 2000B FALL ARRESTER WITH ENERGY ABSORBER PN 300 & HOOK PN 112 (C ) FOR ROPE 6 PN 2000B CE MARKED EN353-2:2002

2 PN 2001 FALL ARRESTER FOR STEEL CABLE WITH HOOK PN 112 AND ENERGY ABSORBER PN CE MARKED EN353-2:2002 PN 2001 PN 2002 RETRACTABLE WEBBING FALL ARRESTER, 2.25mtr.S. WITH ENERGY ABSORBER 8 CE MARKED EN353-2:2002 PN 2002 PN 800 TRIPOD PACKED IN TRIPOD BAG PN PN 800 CE MARKED EN795 CLASS B PN 801 WINCH WITH 20 mtr.s. GI WIRE ROPE 10 PN 801 CE MARKED EN1496 CLASS B 11 PN 112 STEEL KARABINER, SELF CLOSING MANUAL SCREW LOCKING ( 16 MM OPENING) PN PN 121 STEEL SNAP HOOK, SELF CLOSING AUTO LOCKING (18 MM OPENING) PN PN 131 STEEL SCAFFOLD HOOK, SELF CLOSING AUTO LOCKING ( 50 MM OPENING) PN 131

3 14 PN 132 STEEL TOWER HOOK, SELF CLOSING AUTO LOCKING (85 MM OPENING) PN PN 141 STAINLESS STEEL ANCHORAGE HOOK (140 MM OPENING) PN PN 401 ROPE DESCENDER WITH SELF - BREAKING SYSTEM FOR ROPE DIA mm (DOUBLE STOP) WITH HOOK PN 112 CE MARKED EN341 PN R 300* without Rope VERTIROLL DEVICE ( SWISS RESCUE WITH SET OF 1 SINGLE PULLEY PY 001, 1 DOUBLE PULLEY PY 002, 1 JUMAR HANDLE VRS 02 & 1 ANCHOR STRAP PN 806) WITH 3 KARABINERS PN 112 CE MARKED EN341 R 300* without Rope 18 PN 402 (L) ASCENDER HANDLE (LEFT) PN 402 (L) 19 PN 402 (R) ASCENDER HANDLE (RIGHT) PN 402 (R) 20 AP 001 SINGLE ANCHOR PULLEY FOR 11 MM AND 12 MM KARAMANTLE ROPE AP AP002 DOUBLE ANCHOR PULLEY FOR 11 MM AND 12 MM KARAMANTLE ROPE AP AP011 ANCHOR ALUMINIUM PULLEY FOR 11 MM AND 12 MM KARAMANTLE ROPE AP PN 731 FIGURE FOR EIGHT PN 731

4 24 ABS 3W ABSEILING DEVICE WITH ROTATIONAL HOOK & 2 NOS. HOOK PN 112 WITHOUT ROPE CE MARKED EN341 ABS 3W 25 ABS 3WH ABSEILING DEVICE WITH ROTATIONAL HOOK AND RESCUE HOISTING FACILITY & 2 NOS. HOOK PN 112 WITHOUT ROPE CE MARKED EN341 &1496 ABS 3WH 26 KMS 10 KARAMANTLE ROPE 10mm FOR ABSEILING DEVICE CE MARKED EN1891 CE MARKED EN1891 KMS WGS 20 ALKO LOAD WINCH 20 mtr. GALVANISED STEEL ROPE (6 MM. DIAMETER) WITH MAXIMUM LOAD CAPACITY OF 250 KG. WGS IP IPOD CANTILEVER ARM, STAINLESS STEEL WITH GROUND SLEEVE CE MARKED EN795 CLASS B IP PCGS 5 WITH GALVANISED STEEL CABLE 5 mtr.s. ALGS 5 WITH GALVANISED STEEL CABLE 5 mtr. PCGS 6 WITH GALVANISED STEEL CABLE 6 mtr.s. ALGS 6 WITH GALVANISED STEEL CABLE 6 mtr. PCGS 7 WITH GALVANISED STEEL CABLE 10 mtr.s. PCGS 5 ALGS 5 PCGS 6 ALGS 6 PCGS 10

5 30 ALGS 10 WITH GALVANISED STEEL CABLE 10 mtr. PCGS 15 WITH GALVANISED STEEL CABLE 15 mtr.s. ALGS 15 WITH GALVANISED STEEL CABLE 15 mtr. NCS 20 WITH GALVANISED STEEL CABLE 20 mtr.s. ALGS 10 PCGS 15 ALGS 15 NCS NS 30 WITH GALVANISED STEEL CABLE 30 mtr.s. NS 30 MESH SIZE 25mm, MESH ROPE 2mm (Double Cord) PN 0252 _ MESH SIZE 75mm, MESH ROPE 4mm PN 0754 _ 32 MESH SIZE 100mm, MESH ROPE 4mm PN 1004 _ MESH SIZE 75mm, MESH ROPE 6mm PN 0756 _ MESH SIZE 100mm, MESH ROPE 6mm PN 1006 _

6 MESH SIZE 25mm, MESH ROPE 2mm (Double Cord), NET SIZE (10 mtr. X 3 mtr.) PN MESH SIZE 25mm, MESH ROPE 2mm (Double Cord), NET SIZE (10 mtr. X 5 mtr.) PN MESH SIZE 25mm, MESH ROPE 2mm (Double Cord), NET SIZE (6 mtr. X 4 mtr.) PN MESH SIZE 100mm, MESH ROPE 4mm, NET SIZE (10 mtr. X 3 mtr.) PN MESH SIZE 100mm, MESH ROPE 4mm, NET SIZE (10 mtr. X 5 mtr.) PN MESH SIZE 100mm, MESH ROPE 4mm, NET SIZE (6 mtr. X 4 mtr.) PN PN 151 ROPE LADDER WITH ALUMINIMUM RUNGS 25 MM DIA, ROPE 12 MM PN PN 161 ROPE LADDER WITH WOODEN RUNGS 35 MM DIA, ROPE 16 MM PN 161 ROOF TOP LADDAR 36 AS PER SPECICATION ATTECHED BELLOW Complete Set 3 MTR. 3 NOS. 37 PN 3000 HORIZONTAL ANCHORAGE WEBBING LIFELINE 20m WITH RATCHET TENSIONER & TWO AUTO LOCKING STEEL KARABINERS PN 113 (ONE AT EACH END), PERMANENTLY ATTACHED TO AN ASSEMBLY BAG CE MARKED EN795 CLASS B PN 3000

7 ROOF TOP LADDER Safety while working over Fragile Roofs... While working over Fragile Roofs Safety, while working over Asbestos Cement sheets, has assumed high significance due to serious risks involved, often resulting in fatal accidents and it is difficult for any employer to escape from the responsibilities of providing safe working methods to his employees. Factory Rules state the Protective measures relating to Fragile Roofs as In any factory, no worker shall be required to stand or pass over or work on or near any roof or ceiling covered with fragile material through which he is liable to fall, in case it breaks or gives way, a height of more than 03 meters, unless:- A) Suitable and sufficient ladders, duck ladders or crawling boards which shall be securely supported, are provided and used; and B) A permit to work on the fragile roof is issued to him each time he is required to work there on by a responsible person of the factory concerned. Out of this, crawling board (also called Roof Ladder) is the only device which can be used for working safely above A. C. Sheets and thereby its usage becomes a statutory requirement for

8 any work (like sheet replacement, laying of new sheets, bolt replacement, leak proofing etc.) Above A.C sheet roofs. WHY TO USE ROOF LADDERS? 01.Safety of Workmen/contract workmen A.C. Sheets, even though manufactured strong, lose the bond between asbestos fibre and cement due to hairline cracks, which develop through the negligence of unskilled sheet fitting workers. The constant action of environmental pollution, terrain, rains, wind pressures, temperature variation, vibrations and other adverse conditions produced during process further weaken them. The worker unknowingly steps on such a sheet and fall. 02. Statutory Compliance Enforcing Authorities can prosecute an occupier or the Manager only for non compliance of what is required in the Rules; be it the providing of Breathing apparatus, Safety belt or Roof ladder. Hence the legal consequence of an accident with out them can be left to one s imagination. We have any number of examples around us. 03. Damage of A.C. Sheets The load bearing capacity of Asbestos Cement sheets is only 55 Kgs per sq. Ft. With the area of both the feet together is less than 0.3sq. Ft., The load imposed by human body over A.C. Sheet is manifolds of its load bearing capacity. This creates cracks on the sheet which may go unnoticed or neglected by the workmen, even though it may not necessarily result in accidents. Based on the above, your decision today could be timely. We at Sure Safety are just a phone call away to help you. Specialty of Roof Top Ladders Sturdy but light parts The Parts used are sturdy and at the same time light in weight. Weather Proof Construction The ladder has been constructed of weather proof materials and hence the ladders do not get damaged even if exposed to rain or sunlight. Cost per set The cost per set is less comparing with the cost of parts. This has been made possible only by selling the product with a very narrow margin. Easy to use The cumbersome auxiliaries have been eliminated by expert designing of the product so as to encourage the users. I.S.Norms The product is being supplied according to I.S. Norms using the best available materials. Safety Roof Top Ladder is manufactured from sturdy extruded light weight aluminum provided with a sliding device, Elevating pads and Quick-action clamps. This set comprises of : Ladder 3m in length 3 Nos. Half ladder 1.5m in length 1 No. Working platforms 0.6m length 3 Nos. Quick-action clamps 25 Nos. Elevating pads 15 Nos. Safety belt complete with pouch, 3m Life ling and Screw hook 1 No. The system permits a linear coverage of 10.5m from any point on a fragile roof. Working on the platforms is possible up to 1.2m from the ladder path. For working beyond 1.2m the ladder can be adjusted across the roof corrugations.

9 Ladder System Distributes the weight of the worker over several saddles to ensures that the weight is transferred equally to the load bearing structure of the roof for the safety of the worker, instead of the fragile corrugated roof. The ladders are so designed that a worker can reach any point from the roof and not necessarily from the apex