VIBRATION DAMPENING TECHNOLOGY

Transcription

1 VIBRATION DAMPENING TECHNOLOGY

2 Hit Harder & Penetrate Deeper Penetration Rating (gpi/in2) Hidden Insert Technology (HIT ) is the power behind MFX micro-diameter arrows. HIT inserts make MFX s micro-diameter possible and give automatic broadhead alignment because the broadhead shank aligns directly against the inside diameter of the shaft. That means tighter groups and deeper penetration. HIT delivers the best of all worlds for true hunting arrow performance. Measured for 400 spine shafts MFX Classic MFX Team Realtree Regular Carbon Brand A Regular Carbon Brand B Penetration Rating is a simple measure of hunting arrow performance when comparing shafts of equal spine (stiffness). The Penetration Rating is calculated by taking the weight of the shaft in grains-per-inch (gpi) divided by the frontal area of the shaft in square inches (gpi/in2). Penetration Rating is an effective measure of the penetrating ability of a hunting shaft, taking into account the diameter and weight relationship. Laboratory testing shows the higher the Penetration Rating, the deeper the arrows penetrate into test materials. HIT Inserts - 16 Grains NEW 2 Brass HIT Break-Off Insert 75/50 Grains US Pat. Nos. 7,004,85-7,270,618-7,375,504-7,115, 055 Other Patents Pending MFX CARBON Serious bowhunters know that MICRO-DIAMETER CARBON ARROWS deliver maximum big game performance ACCURACY, DURABILITY, & PENETRATION. MFX Team Realtree and Classic combine a patented micro-small diameter for increased penetration, low wind drift, a heavier mass for power, and patented HIT inserts for better broadhead accuracy.

3 MFX Realtree Now with ViBrake Silent But Deadly. Now get the power of MFX with the quiet accuracy of ViBrake. New ViBrake X Nocks make the arrow quieter in flight and tighten groups by eliminating vibration in the shot. dell el Wad Micha Quieter Shots, Less Spooked Game MFX Team REALTREE Micro-diameter MFX carbon construction Straightness: ±.003 tolerance: ±2 grains Direct-fit ViBrake X Nock included HIT Inserts included MSRP Shaft $5/doz. (grains/inch) RPS Point (inch) Broadhead Adapter Ring (BAR) / #6 #5 #5 /64 NEW #4 Realtree is a registered trademark of Jordan Outdoor Enterprises, Ltd. Bone Collector is a trademark of Michael Waddell, LLC X Nocks TM MFX Classic Micro-diameter MFX carbon construction PhotoFusion wood-grain finish Straightness: ±.003 tolerance: ±2 grains Direct-fit X Nock installed Brass HIT Break-Off Inserts included MSRP Shaft $105/doz (grains/inch) RPS Point (inch) / 32 Broadhead Adapter Ring (BAR) #6 #5 #5 3

4 Quiet, More Accurate Shooting Only From Beman. Bowhunters demand super-quiet gear to increase success in the field. The need for stealth inspired the ViBrake vibration dampening insert. ViBrake, developed in conjunction with Sims Vibration Labs utilizing LimbSaver NAVCOM IV, delivers arrow dampening technology that marks the next great advancement in accuracy and vibration control. ViBrake Inserts come standard with Beman s ICS Hunter line of arrows making the most popular carbon arrow even more deadly. Vibration Dampening Technology Vibration Time Without ViBrake Single ViBrake Dual ViBrake Inserts 4 ViBrake inserts (also available as an accessory) fit most standard-diameter carbon arrows, and are compatible with all ICS Hunter models. See your Beman dealer for compatibility details. Patent-pending Limbsaver and Navcom IV are trademarks of Steven Sims, Inc.

5 ICS CARBON ARROWS with ViBrake Beman pioneered the concept of vibration reduction resulting in exclusive ViBrake Vibration Dampening Technology. Patent-pending ViBrake quiets the shot and improves broadhead accuracy. ICS Hunter and Camo Hunter come with ViBrake Inserts included. The 2008 ICS Hunter Elite comes with both ViBrake Inserts & ViBrake Nocks plus the tightest tolerances in the Beman line-up. Get quiet, accurate shooting and put more venison in the freezer with ViBrake. A Stealth Attack Now With An Afterburner. New ViBrake Nocks quickly stabilize arrow flight for stealth, accuracy, and more successful bowhunting. ViBrake Nocks improve broadhead flight and quiet the shot by dampening vibration at the critical point where the bowstring transfers energy to the arrow. The ICS Hunter Elite comes complete with ViBrake Nocks & Inserts and combine with ±.001 straightness for the tightest groups and an ultra-silent shot. ViBrake nocks are available to accessorize the complete line of ICS Hunters and fit most standard diameter carbon arrows see a qualified Beman dealer for fitment information. ViBrake Produces Tighter Groups ViBrake Inserts & Nocks Included With ICS Hunter Elite Without ViBrake Single ViBrake Dual ViBrake Nocks ICS Hunter Elite with Dual ViBrake Straightness: ±.001 tolerance: ±2 grains Black, micro-smooth finish Direct-fit ViBrake S Nock included ViBrake CB Inserts included ICS Hunter Elite available only through storefront full-service, authorized Beman retailers. MSRP Shaft $100/doz (grains/inch) RPS Point (inch) 5 / 16 5 / 16 / 32 / 32 Broadhead Adapter Ring (BAR) # 8 # 8 # 8 # 8 ViBrake S Nocks (available as an accessory) fit most standard-diameter carbon arrows, and are compatible with all ICS Hunter models. See your Beman dealer for compatibility details. 5

6 ICS HUNTER Archer s Choice is more than just a TV show; it s about Ralph & Vicki Cianciarulo sharing their exciting adventures with bowhunters nationwide. Whether they are chasing caribou, waiting for whitetails, or calling giant moose, the Cianciarulos will always be packing Beman. ICS Hunter and ICS Camo Hunter arrow shafts now come with lethal ViBrake vibration dampening inserts included. Group-tightening ViBrake inserts reduce vibration, quickly stabilize arrow flight, and increase accuracy. Inserts ICS Hunter with ViBrake Inserts TM ViBrake inserts (also available as an accessory) fit most standard-diameter carbon arrows, and are compatible with all ICS Hunter models. See your Beman dealer for compatibility details. 6 Patent-pending Straightness: ±.003 tolerance: ±2 grains Black, micro-smooth finish Direct-fit S Nock installed ViBrake CB Inserts included Optional G Nock system sold separately ViBrake Nocks sold separately MSRP Shaft $77.50/doz (grains/inch) RPS Point (inch) 5/ 16 5 /16 Broadhead Adapter Ring (BAR) TM

7 ViBrake Nocks Available ViBrake Nocks (available as an accessory) fit most standard-diameter carbon arrows, and are compatible with all ICS Hunter models. See your Beman dealer for compatibility details. ICS Camo Hunter with ViBrake Inserts TM Straightness: ±.003 tolerance: ±2 grains PhotoFusion camo finish Direct-fit S Nock installed ViBrake CM Inserts included ViBrake Nocks sold separately MSRP Shaft $5/doz (grains/inch) RPS Point (inch) 5/ 5 /16 Broadhead Adapter Ring (BAR) TM 7

8 ICS CARBON All bowhunters deserve serious arrows and high-strength ICS C2 carbon delivers. New ICS BowHunter and ICS Hunter Junior promise outstanding performance, after all, we invented carbon arrows. The BowHunter and Junior offer strength and lightweight Beman carbon for a perfect balance of speed and long-lasting durability. ICS Bow Hunter Straightness: ±.006 -tolerance: ±2 grains Direct-fit Super Nock installed CB Inserts included G Nock system sold separately ViBrake Nock & Insert compatible sold separately ICS Hunter Junior MSRP Shaft $5/doz (grains/inch) RPS Point (inch) 5/ 16 5 /16 Broadhead Adapter Ring (BAR) TM MSRP Shaft $55/doz. One size fits bows up to 40 pounds (grains/inch) Direct-fit Super Nock installed CB Inserts installed (26 & 28 ), included (28 only) RPS Point (inch) Broadhead Adapter Ring (BAR) Factory fletched with 3 vanes ViBrake Nock & Insert compatible sold separately Up to 40 pounds 7.3 / 32

9 Tim Clellan Bailey Mc Huf fma n Get Vibrake Components For The Most Lethal, Accurate, & Silent Shot ViBrake Nocks and Inserts (available as accessories) fit most standarddiameter carbon arrows, and are compatible with all ICS Hunter models. See your Beman dealer for compatibility details. Tim Stric klan d S d cklan Stri hirley Vibrake Nocks Available In Yellow, Red, Green, and Orange. Successful Bowhunters Choose Beman

10 Available For Crossbow Bolts. Today s hunters demand accuracy, precision, and stealth to achieve success in the field. Beman answers with the new ViBrake vibration dampening insert for bolts. ViBrake, originally developed for conventional arrows, now provides vibration dampening technology for the crossbow. ViBrake Inserts come standard with ICS Lightning Bolt the most advanced crossbow bolt ever. ICS Lightning Bolt Lighting Bolt delivers innovative technology for today s high-performance crossbows. The ICS Lightning Bolt combines the durability and speed of carbon and the accuracy and stealth of ViBrake. Lightning Bolt promises a new standard of performance for serious crossbow hunters. Vibration Time With ViBrake Without ViBrake ICS Lightning Bolt Inserts 10 Patent-pending High-strength C2 carbon construction tolerance: ±2 grains Black, micro-smooth finish Outside diameter: 22/64 ViBrake Bolt Inserts included with fletched bolts MSRP Fletched $6/doz. Bolt Sizes (grains/inch) RPS Point (inch) 11/ TM

11 11

12 TM 12

13 Target Arrows Target and 3D shooters know that accurate arrows mean the difference between catching a 10 and winning the tournament, or going home empty-handed Win Big With Beman Carbon Arrows. Beman.3 Large,.3mm diameter Straightness: ±.006 tolerance: ±2 grains Super UNI Bushing installed Nocks sold separately ICS Energy High-strength C2 carbon construction Straightness: ±.006 tolerance: ±1.5 grains Black, micro-smooth finish UNI Bushing installed Points & G Nocks sold separately MSRP Shaft $84/doz. (grains/inch) RPS Point (inch) RPS Insert (grains) / US Patent: 5, 417, 43 MSRP Shaft $72/doz. (grains/inch) UNI Bushing (grains) One-Piece Parabolic Point (grains) US Patent: 5, 417, 43 Take advantage of strength and low wind-drift with small diameter Carbon Flash. A great value-priced carbon target shaft from Beman. Carbon Flash S mall-diameter, unidirectional pultruded carbon Available in seven sizes O ver Nock included G Nock system sold separately MSRP Shaft $33/doz. (grains/inch) Glue-In Point (grains) G Nock Adapter (grains) 570 (14/64 ) 630 (14/64 ) 750 (14/64 ) 00 (13/64 ) 1000 (13/64 ) 1200 (12/64 ) 1400 (12/64 )

14 COMPOUND BOW Release Aid Calculated Peak Bow - lbs. Medium Cam Single or Hard Cam ARROW LENGTH RECURVE BOW - lbs. Finger Release A A B C D D E F G H I A B C D D E F G H I J B C D D E F G H I J J C D D E F G H I J J K D D E F G H I J J K L D E F G H I J J K L M E F G H I J J K L M N F G H I J J K L M N N G H I J J K L M N N N H I J J K L M N N N I J J K L M N N N J J K L M N N N J K L M N N N 85-0 Using The Beman Arrow Selection Chart 1. Once you have determined your Correct Arrow Length and Calculated Peak Bow, you are ready to select your correct shaft size: Compound bows: In the Bow column (left-hand side of the chart), select the column with the type of cam on your bow. Then locate your Calculated Peak Bow in that column. Recurve bows: In the Bow column (right-hand side of the chart), locate your Actual Peak Bow at your draw length. 2. Move across that row horizontally to the column indicating your Correct Arrow Length. On the Beman Arrow Size-Selection Chart, note the letter in the box where your Calculated Peak Bow row and Correct Arrow Length column intersect. The Shaft Size box below the Chart with the same letter contains your recommended shaft sizes. Select a shaft from the Chart that best meets your shooting requirements. All Beman shafts use a spine-deflection number to determine size. Group A Group B Group Flash Flash Flash Flash Flash Group D Group E Group Flash Flash Flash Energy Energy Flash Energy Group G Group H Group Flash Energy Energy Energy Energy Realtree Realtree Realtree Classic Classic Classic ICSH/B ICSH/B ICSH/B CAMO CAMO CAMO Group J Group K Group Energy Energy Energy Energy Realtree Realtree Realtree Classic Classic Classic ICSH/B ICSH/B ICSH/B CAMO CAMO CAMO Group M Group N Size Indicates suggested shaft sizes. Spine Spine of arrow size shown (static). Model Designates arrow 2 Listed in grains per inch Energy Realtree Realtree Team Realtree MFX ICSH/B Flash Flash Realtree CAMO Energy ICS Energy Classic Beman ICSH/B Classic Classic MFX ICSH/B ICS Hunter Elite, ICS Hunter & Bowhunter CAMO CAMO ICS Camo 2 Visit for complete shaft size selection and component information. 14

15 MFX MICRO-DIAMETER CARBON Micro-diameter carbon construction ICS CARBON High-strength C2 carbon construction LArge-Diameter CARBON Large-diameter, ultra-lightweight carbon Straightness Small-diameter, unidirectional carbon High-strength C2 carbon construction Insert Finish Sizes ViBrake X Nock - 13 g HIT insert - 16 g Equipped Black with 300, 340, 400, 500 Realtree APG Camo with ±.003 X Nock - g Brass HIT insert - 75/50 g Available High-Detail Traditional 340, 400, 500 Wood Straightness Nock & Insert Nock Insert Finish Sizes ±.001 ViBrake S Nock - 1 g ViBrake CB insert - 22 g Easy- 300, 340, 400, 500 Equipped Equipped Black, Pull Finish with ±.003 S Nock - 13 g ViBrake CB insert - 22 g Easy- 300, 340, 400, 500 Available Equipped Black, Pull Finish with ±.003 S Nock - 13 g ViBrake CM insert - 24 g Mossy Oak 340, 400, 500 Available Equipped Break-Up 300, with Camo Super Nock - 13 g CB insert - 21 g Easy- Up to 40 lbs. bow weight, Available Available Black, Pull Finish 26 & 28 arrow length ±.006 Super Nock - 13 g CB insert - 21 g EasyAvailable Available Black, Pull Finish 300, 340, 400, 500 ±.006 G Nock - 7 g CB insert - 21 g Straightness Straightness ICS CROSSBOW BOLTS Nock ±.003 ±.006 PULTRUDED CARBON Nock & Insert Straightness Nock & Insert Super Nock - 13 g RPS insert - 40 g Nock Over Nock - 12/64 - g Over Nock - 13/64 - g Over Nock - 14/64-12 g Nock & Insert Half moon Nock - 11 g Flatback Nock - g ViBrake insert - 47 g Nock Insert Available Nock Insert Nock Insert Black, Easy- 360, 410, 460, 520, 600, Pull Finish 60, 780 Finish Black, MicroSmooth Finish Finish Sizes 340, 400, 500 Sizes 570 (14/64 ), 630 (14/64 ), Black, Easy- 750 (14/64 ), 00 (13/64 ), Pull Finish 1000 (13/64 ), 1200 (12/64 ), 1400 (12/64 ) Finish Sizes EasyEquipped Black, Pull Finish 20 & 22 bolt length! WARNING Follow these instructions to avoid personal injury. SEE warnings and or 877-info-etp. Arrow Breakage An arrow shaft can become damaged from impacts with hard objects or other arrows, or after being shot into a game animal. A damaged arrow could break upon release and injure you or a bystander. You must carefully inspect each arrow shaft, nock and other components before each shot to see that they have not been damaged. Before shooting, place the arrow between your thumb and fingers, and using your other hand to slowly rotate the shaft, run your fingertips along the entire arrow length, feeling and looking closely for nicks, cracks, splits, dents, or other marks that could indicate the shaft has been damaged. 1. Grasp the shaft just above the point and below the nock, then flex the arrow in an arc (bending it away from you and others) with a deflection of one to two inches (2.5 to 5 cm), and listen for cracking noises. Perform this test four to six times, rotating the arrow slightly between each flex until you have gone around the entire arrow. If you hear or feel cracking, the carbon has been damaged. 2. While still holding the point and fletching ends, twist the shaft in both directions. If the arrow relaxes or twists easily, the carbon has been damaged. If an arrow has been damaged, or if you believe it has been damaged, do not shoot it again, as it could break on release, and sharp arrow pieces could hit and injure you or someone nearby. Bowhunting Precautions Carbon arrows may be used for hunting if special precautions are taken. Carbon arrow shafts used in bowhunting could break after being shot into a big game animal. This arrow breakage may be caused by the angle in which the arrow impacts the animal, or by the reaction of the animal itself such as rolling on the shaft or hitting against a tree. The break may be inside the animal and may not be immediately obvious after recovery of the animal. When a carbon arrow breaks, it tends to shatter with the resulting creation of many sharp, splinter-like fragments. These fragments can be harmful to humans if ingested; therefore, when game is recovered, the hunter should always carefully determine whether the arrow has broken inside the animal. If the arrow has broken, follow the instructions below: 1. Use extreme caution when removing broken segments of the carbon arrow shaft. 2. Use care to avoid splinters of carbon fiber when field dressing game animals. 3. Carefully remove the flesh in the area of the wounds. It may contain carbon fiber, particularly at the entry and exit points. 4. Thoroughly clean the surrounding area of the wound and inspect for the presence of carbon fragments. 5. Carefully dispose of any meat that might contain carbon splinters. Do not leave for scavengers to eat. For information on proper arrow preparation and assembly, visit 15

16 Lethally Accurate and Deadly Quiet Beman pioneered the first ever carbon arrow and continues developing the most advanced arrows to provide archers more successful hunts. From the quiet accuracy of ICS Hunters, to the hard-hitting MFX Team Realtree Beman designs arrows for serious bowhunting. Nocks Inserts Beman ViBrake Vibration Dampening Technology continues the process of innovation. Simple design, devastatingly lethal, ViBrake stops vibration and quickly stabilizes the shot for more accurate, stealthy shooting. Top bowhunters choose Beman.