Contents. Safety & Fire Orders

Size: px
Start display at page:

Download "Contents. Safety & Fire Orders"

Transcription

1 September 2015

2 Contents Introduction Air Cadet & Officer Ranks Responsibilities of a Follower Paying Compliments Teams & Activities Summer Courses Drill at the Halt Drill on the March Uniform Guide Positive Social Relations for Youth Identification & Squadron Contacts This manual was compiled by 2Lt Fred Sandoval for 180 Mosquito Squadron (Sep 2013) Safety & Fire Orders Any cadets who see anything unsafe should immediately report the situation to a NCO or officer. In the event of a fire, yell "Fire, Fire, Fire!" and pull the nearest fire alarm. Upon hearing the fire alarm, all cadets and staff must quickly and calmly go out to the schoolyard, form up on the basketball court, and await further instructions. Fire Evacuation Point 1

3 Welcome to 180 Mosquito Squadron! The Royal Canadian Air Cadet program started in 1941 to train young men for entry into the Royal Canadian Air Force during World War Mosquito Squadron was formed on October 30th, 1942, and has been a major cadet unit in Toronto ever since. The Squadron is named after the De Havilland DH 98 Mosquito. A very successful fighter-bomber airplane used by Canada and other commonwealth forces during World War 2. The plane was unique in that it was made of wood, and was affectionately called the Mossie and the Wooden Wonder. Today, the Air Cadets is operated jointly by the Canadian Armed Forces and the Air Cadet League of Canada, a civilian non-profit organization. 180 Squadron s civilian sponsor is the North Toronto Sponsoring Committee. Air Cadet Motto Aims of the Air Cadet Program To learn - To serve - To advance Crest To develop in youth the attributes of good citizenship and leadership To promote physical fitness To stimulate the interest of youth in the air activities of the Canadian Armed Forces 2

4 Air Cadet & Officer Ranks Air Cadets Air Force Officers Air Cadet (Cdt) Leading Air Cadet (LAC) Corporal (Cpl) Officer Cadet (OCdt) Second Lieutenant (2Lt) Flight Corporal (FCpl) Lieutenant (Lt) Sergeant (Sgt) Captain (Capt) Flight Sergeant (FSgt) Major (Maj) Warrant Officer Second Class (WO2) Lieutenant-Colonel (LCol) Warrant Officer First Class (WO1) Colonel (Col) Brigadier General (BGen) Major General (MGen) Lieutenant General (BGen) General (Gen) 3

5 Responsibilities of a Follower A big part of being an air cadet is learning to be a leader. But before one can be a good leader, they must learn to be a good follower and work well in a team. The following are key responsibilities expected from cadets: Respect the leader and other team members Cooperate with others Admit mistakes and learn from experience Accept constructive criticism Assume responsibility Be honest Accept other team members for who they are Know the job and be prepared Communicate clearly with others Paying Compliments Air cadets follow many military traditions. Showing respect and paying appropriate compliments are an important practice, as it shows that one recognizes important people and symbols. NCOs & OCdts When talking to or being talked to by a Non-Commissioned Officer (NCO, Sgts and up) or an Officer Cadet (OCdt), cadets must stand at the position of attention. As well, they always address the NCO by their rank (Sgts and FSgts) or as Sir/Ma'am (WOs and OCdts). When the cadet is done talking, they dismiss themselves by doing a right turn and marching off. Commissioned Officers Commissioned officers (2Lt and up) are treated the same way as above, however, they are saluted after coming to attention, and before dismissing. Inside a Building Salutes are not normally given inside buildings, except during parades, ceremonial occasions, when entering or leaving an offices, or when otherwise designated. Cadets should politely greet officers in common areas. When entering a classroom or office, cadets should come to attention, salute if a commissioned officer is present, and ask permission to enter. Other Occasions It is appropriate for cadets to salute on other occasions: When the Canadian or another foreign national anthem is played When recognizing a commissioned officer who is not in uniform When the national flag of Canada is being lowered or raised When boarding or disembarking any of Her Majesty s Canadian ships or those of a foreign service, cadets must pay compliments to the quarterdeck 4

6 Teams & Activities 180 is a very active squadron. Cadets will benefit and have fun in taking part in extra teams & activities. Here are some of the teams, courses, trips, and events... Teams & Courses Band Drill Teams Pilot Ground School Sports Nights Trips & Events Borden Trips Canoe Weekend Gliding Days March Break Trip Survival Weekend Winter Weekend 5

7 Summer Courses Summer courses are held at various places during July and August. The most common locations are at Canadian Forces Bases Borden and Trenton. Cadets can sign up for the various courses, and selections are done starting in April, based on cadet's rank, attendance, and participation. First year cadets must join prior to December to be eligible for a following summer course. They can chose either General Training, or Basic Drill & Ceremonial, depending on their age by the end of the course. Below is a chart of all the available summer courses... Year 1 Years 2 & 3 Years 3 & 4 Years 4+ General Training 2 weeks Cadets aged Basic Drill & Ceremonial 3 weeks Cadets aged 15+ Basic Aviation Basic Aviation Technology & Aerospace Basic Drill & Ceremonial Basic Fitness & Sports Basic Musician Advanced Aviation 3 weeks Intermediate/Advanced Musician Air Rifle Marksmanship Instructor Drill & Ceremonial Instructor Fitness & Sports Instructor International Air Cadet Exchange 3 weeks Power Pilot Scholarship 7 weeks Staff Cadet 7 weeks Basic Survival Survival Instructor All of the above are 3 weeks Advanced Aerospace Aircraft Maintenance Airport Operations Glider Pilot Scholarship All of the above are 6 weeks, except as noted 6

8 Drill at the Halt Air Cadet foot drill is used to manage groups of cadets, move them efficiently from point to point, and to instill discipline. All movements should be done quickly and sharply. Verbal timings for most movements at the halt involve saying "one" during the movement, and "two, three" during a standard pause. This is done at 120 beats per minute. For example, a turn would be "one, two, three, one". The information here is taken from the CAF Manual of Drill and Ceremonial. Some commands and timings may differ from those used at 180 Sqn, summer courses, and other units. Forming Up Cadets are ordered to form up when beginning training. On the command FORM UP IN SINGLE/TWO/THREE RANK(S) MOVE, all cadets will: Stand at attention Observe the standard pause March forward towards the instructor The first cadet approaching the instructor will halt three paces directly in front, and the remainder will come to attention arms-length to the left and/or one pace behind the first cadet Position of Attention This position means that something important is happening or about to happen, and cadets should be alert. In this position: Heels are together and in line Feet turned out to form a 30-degree angle Body is straight and standing tall Arms are straight with hands in a fist Head is up, with eyes looking to the front Attention from Stand at Ease On the command ATTEN TION, bend the left knee and bring the left leg up then down so heels are together. At the same time, move the arms quickly to the side. Position of Stand at Ease This position allows no relaxation, but can be maintained without strain for a longer time than the position of attention. Stand at Ease from Attention On the command STAND AT EASE, bend the left knee and bring the left leg up then down to the left, so heels are 25 cm apart. At the same time, bring the arms back, so they are straight behind the body, right hand in the palm of the left, with thumbs crossed, and fingers straight. Stand at Ease from Stand Easy On the cautionary command SQUAD, move the arms back to the position of stand at ease. 7

9 Position of Stand Easy This position allows cadets to relax in formation. They can move their upper body and adjust clothing, but not their feet. Talking is not permitted unless authorized. Stand Easy from Stand at Ease On the command STAND EASY, arms come to the side, as in the position of attention. After a standard pause, cadets can relax. Carrying of Articles If any one article is carried, such as a bag or parka, it must be carried in the left arm or hand. If an article is carried when marching, the left arm is not swung. At the halt, the free arm should be at the side as for the position of attention (even if standing at ease). Saluting Salutes are given to pay compliments to commissioned officers, or at other occasions as appropriate. Saluting at the Halt On the command TO THE FRONT/RIGHT/LEFT SALUTE: Bring the right arm up in the shortest and quickest way, the upper arm is parallel to the ground, the hand is open, in line with the arm, palm down, and with all fingers straight and together, the second finger is in line with the right eyebrow, and the head is forward, or turned to the right or left as ordered A standard pause is observed The hand is brought down and the head moved forward, to the position of attention 8

10 Turning Turns are done to change the direction of the cadet or flight. Turns are normally preceded by the words MOVE TO THE LEFT/RIGHT, or ADVANCE/RETIRE to indicate what direction the turn will be. Turns at the Halt On the command LEFT/RIGHT/ABOUT TURN: Turn left 90 degrees, or right 90 or 180 degrees, as ordered, by pivoting on the heel of the inside foot, and ball of the outer foot Observe a standard pause Bring the outer foot up and then down, to the position of attention On the command LEFT/RIGHT IN CLINE, the movements are the same as above, but the turn is only 45 degrees. Close Paces Close paces are used to move sideways, to a maximum of eight paces. On the command ONE/TWO/etc PACE(S) RIGHT/LEFT CLOSE MARCH: Sidestep in the ordered direction, by bringing the legs up and down quickly, moving 25 cm to the side Observe a quick pause between each step Come to attention at the required step Timing is as follows: For one pace: one-one For two paces: one-one, pause, one-two For three paces: one-one, pause, one-two, pause, onethree Etc... Proving Roll Call On the command ATTEN TION, ANSWER TO YOUR NAME, STAND AT EASE, each cadet must come to attention when their name is called, answer as follows, then go back to standing at ease: Sir or Ma am if the person calling the roll is an officer or warrant officer Flight Sergeant, Sergeant, Flight Corporal or Corporal when the roll is called by a cadet holding these ranks Present if the person calling the roll is below the rank of Corporal If the roll call is supervised by a person senior in rank to the person calling the roll, each cadet must answer to their name with the correct response for the rank of the supervisor Paces Forward and to the Rear Proving is used to identify a cadet when called, or if a cadet has a question or answer if a general request is made by the flight commander. On the command NUMBERS _, _, _ PROVE, the cadets designated raise their left forearm parallel to the ground, keeping their left elbow close to the body and the hand closed as in the position of attention. On the command ATTEN TION, the cadets who proved adopt the position of attention. 9 Paces forward or to the rear may be called to adjust the flight's position. A maximum of three paces can be done. On the command ONE/TWO/THREE PACE(S) FORWARD/STEP BACK MARCH, cadets will take one, two, or three half pace(s) (35 cm) forward or back, starting with the left foot, coming to attention on the appropriate pace. Arms are not swung. Timings are: For one pace: one-two For two paces: one, one-two For three paces: one, one, one-two

11 Right Dress Dressing is done to align all the cadets to each other, side by side and front to back. On the command RIGHT DRESS, the following movements are done, with standard pauses inbetween: The right-hand cadet in the front rank stands still, and all other cadets take a half pace forward All the cadets, except those in the right file, turn their head and eyes to the right, while the front rank, except the right-hand cadet, bring their right arms up, parallel to the ground, hand in a fist All the cadets move quickly, taking small steps, to align exactly beside and behind each other, while the front rank moves so their fists are in the shoulder of the person beside them On the command EYES FRONT, all cadets turn their heads and eyes quickly to the front. If a LEFT DRESS is called, the same drill is followed, except the movements are all mirrored to the left, instead of the right. If the command is preceded by the words SHOULDER DRESSING, then arms are not raised, and cadets line up shoulder to shoulder. If the command is preceded by the words ELBOW DRESSING, then cadets bring their right hand to their hip and fingers straight, instead of their arm up, and move so their elbow is touching the arm of the cadet beside them. Open and Close Order March These movements are done to increase the space between ranks, usually to allow uniform inspections. On the command OPEN ORDER MARCH: The front rank takes three half paces forward The rear rank take three half paces back No arms are swung The timing is: "one, one, one-two" When formed in two ranks, the front rank stands still, and the rear rank steps back three half paces. On the command CLOSE ORDER MARCH, the squad shall reverse the process above. Dismissal Dismissing cadets usually means the end of a parade or period of instruction. On the command DIS MISS, cadets will do the following movements, with standard pauses in-between: Do a right turn Salute if an officer is on parade March off independently, in quick time Falling In and Out Cadets may be told to fall out or fall in to a flight for various reasons. On the command FALL OUT, the cadet ordered must come to attention, wait a standard pause, quick march, immediately wheel to the right, then proceed as designated once past the flight. On the command FALL IN, the cadet ordered marches to the left of the flight, and returns to their position by marching in rear of the rank, wheeling into their original position and halting. 10

12 Drill on the March Marching in Quick Time When marching, the following should be done: March at 120 beats per minute Take 75 cm paces Keep the body straight and head up Arms are kept straight, and swung waist-high Maintain a pace behind the person in front Keep in line with the surrounding cadets Marching from the Halt On the command QUICK MARCH: Cadets step off with their left foot The first pace is a half pace (35 cm) Arms are swung Timing: left, right, left The command is normally preceded with "BY THE LEFT/RIGHT" to indicate which side cadets are to be in line with. If the command STEP OUT or STEP SHORT is given, then the pace length is increased 10 cm, or decreased 20 cm respectively. The command QUICK MARCH is used to go back to the normal pace length. If the command MARCH AT EASE is given, then the upper body can be relaxed (usually for long marches). The command MARCH AT ATTEN TION is given to go back to normal marching. Halting The halt is given when the left foot is down. On the command SQUAD HALT: A pace is taken with the right foot A half pace is then taken with the left foot The right foot is bent and comes to attention, while the arms are brought quickly to the sides. Timing: one, one-two Marking Time Marking time is used to stop the forward motion of marching, but keep a 120 beat per minute cadence. Mark Time from the March On the command MARK TIME, given when the right foot is on the ground: Take a half pace with the left foot Bring the right foot in beside the left foot, without scraping the ground, while bringing the arms to attention Bend the left knee up 11

13 Continue bringing each leg down and up, touching the ground first with the toes, and keeping the body straight Timing: "Left, in, left, right, left" To start marking time from the halt, the command is QUICK MARK TIME. On the command FOR WARD, given as the left foot is on the ground, the cadet will straighten the right leg, assume the position of attention, then shoot the left foot forward in a half pace and continue marching. Halting The halt is given when the left foot is down. On the command SQUAD HALT: Cadets will take a further mark time pace with the right foot Then take a mark time pace with the left foot When the right foot comes down again, the cadet stats at attention Timing: one, one-two Wheeling Wheels are used to change the direction of march by making 90 degree turns. The radius of the turn is 1.25 m. On the command RIGHT/LEFT WHEEL, the inner cadets step short and the outer cadets step out. Each file stays in line, and cadets stay aligned to the cadet on the inside of the wheel If the wheel is to be less than 90 degrees, the command FOR WARD is ordered when the leading file is facing the required direction. 12

14 Changing Step Changing step is used either by an individual cadet to correct their step, or ordered by the commander to change the step of the group. Change Step on the March: On the command CHANGE STEP, given on the right foot: Take a half pace with the left foot Quickly raise the right foot and bring it down, while bringing arms to the side Quickly start marching again with the left foot The timing is a very quick: left, right, left Change step when Marking Time On the command CHANGE STEP, given as the right foot is on the ground, cadets take two successive mark time paces with the left foot and continue marking time. The timing is: left, left-right Saluting on the March Saluting is used to pay compliments either as an individual or when commanded to in a group. Salute on the March On the command TO THE RIGHT/LEFT SALUTE, given on the left foot: Take a pace with the right foot On the next left foot, the right arm comes up to the salute, the head is turned in the direction ordered, and the left arm stays at the side as in attention Four more paces are taken On the last right foot, the salute is brought down On the following left foot, the arms start swinging Timing is: "Check, up, two, three, four, five, down, swing" Paying Compliments When passing certain people, a flight may be ordered to look to the right or left. Eyes Left/Right on the command EYES RIGHT/LEFT, given on the left foot: Take a pace with the right foot Take another pace with the left foot, and turn the head and eyes to the right or left as ordered. The leading cadet keeps their head and eye forward Timing: "Check, over" On the command EYES FRONT, given on the left foot, the movement is the same as above, but the head and eyes are turn to the front. 13

15 Turning on the March Turns on the march are used to change the direction and formation of a flight. They can be used to turn in any direction. Turns are normally preceded by the words MOVE TO THE LEFT/RIGHT, or ADVANCE/RETIRE to indicate what direction the turn will be. Left Turn On the command LEFT TURN, given on the right foot: Take a half pace with the left foot Push into the turn with the right foot, bring it down to attention once turned 90 degrees, and bring the arms to the side Step off with the left foot and resume marching Timing: "Check, pivot, left, right, left" Right Turn On the command RIGHT TURN, given on the left foot: Take a half pace with the right foot Push into the turn with the left foot, bring it down to attention once turned 90 degrees, and bring the arms to the side Step off with the left foot and resume marching Timing: "Check, pivot, right, left, right" On the command LEFT/RIGHT IN CLINE, the movements are the same as above, but the turn is only 45 degrees. About Turn On the command ABOUT TURN, given on the right foot: Take a half pace with the left foot Bring the right foot in beside the left foot, and bring the arms in as in the position of attention Pivot 90 degrees to the right on the ball of the right foot, bringing the left foot up and down Again pivot 90 degrees to the right on the ball of the left foot, bringing the right foot up and down Step off with the left foot and resume marching Timing is: "Left, in, left, right, left" 14

16 Uniform Guide Cadets are normally issued uniforms within two months of joining. Until then, a white dress shirt, black pants, and black shoes should be worn. Cadets are reminded to act appropriately at all times when wearing the uniform, as it identifies them as a member of a highly disciplined and respectable youth group in Canada. The uniform is a loan, and is property of 180 Sqn. Cadets must return their full uniforms when leaving the Sqn. Cadets may also have to pay for lost or damaged uniform parts (beyond reasonable wear). After the initial issue, cadets can contact the supply officer if an exchange is needed for any worn out or outgrown uniform parts. Grooming & Hygiene Cadets are expected to maintain good hygiene levels at all times, whether in or out of uniform. Showers must be taken the day of cadet activities, and every day during multi-day cadet activities (unless shower facilities are not available). Cadets must be clean-shaven (moustaches are allowed), and hair must not be dyed an unnatural or multiple colours. Cadets must not wear any unnecessary jewelry. Conservative items of a personal nature may be allowed. A single silver or gold stud earning may be worn centred in one or both earlobes. Any make-up should be conservative. Glasses and sunglasses must be conservative in style. Eyes must be able to be seen through sunglasses, and they are worn only in sunny conditions when not on parade Male Hairstyle Hair is to be cut so it is not touching the ears or collar, and sideburns cannot go past the middle of the ears. Hair at the back and sides should be taper-trimmed (also known as natural, or faded towards the collar). Hair at the top of the head must not be more than 4 cm in bulk. Female Long Hairstyle Hair is to be kept in a bun, with a hairnet (matching the hair colour) used to contain the bun. Hair is to be gelled so any loose hair is matted down and around the ear. Female Short Hairstyle Hair must not extend past the collar. Hair is not to be overly frizzy or bulky, and must be worn around and behind the ears, using gel as necessary 15

17 Issued Uniform Parts Wedge Shirt Slip-Ons (pair) Tie Tunic (with Tunic Belt) Shoulder Flashes (pair) Nametag (will be ordered) Pants Needed Supplies Belt Boots Socks Parka (with removable inner Fleece) Iron & Ironing board Ironing cloth Starch Kiwi black shoe polish Kiwi shoe shining cloth Lint brush or roller 16

18 Wedge The wedge must be kept clean and lint-free, and is not to be ironed or starched. It should be dry-cleaned if dirty. The wedge is worn on the head tilted slightly to the right, with the front of the wedge two fingers above the top of the nose. Shirt The shirt must be kept clean, lint-free, flat-pressed, and should be washed after use. Creases are ironed into the arms, centred with the epaulette, and running the length of the sleeve. Slip-ons are to be worn at all times, except on summer courses, or if being worn on the parka. In Summer Dress (no tunic), the nametag is to be worn as it is on the tunic, no tie is worn, and the top button is kept undone. Tie The tie must be kept clean and lint-free, and is not to be ironed. It can be machine-washed if necessary. The tie is worn centred, and in a Double-Windsor knot, as per the diagram. The tie length should be to the pants belt buckle Tunic The tunic must be kept clean and lint-free, should be machine-washed when necessary, and must be fully flat-pressed with no creases. Starching is required after washing, and pocket flaps, epaulettes, and the collar must be starched, so as to remain flat when worn. When starching, fully soak the underside of the area to be starched, let completely dry overnight, and then flat-press using an ironing cloth, so as not to burn the starch. When worn, the tunic length should not exceed the bottom of the pants fly. The top button is always kept open, and the tunic belt is worn so extra material goes to the left, and only extends past the first loop. Shoulder flashes are to be sewn on using white thread, 2 cm from the shoulder seem, and parallel to the ground when standing at attention. All other badges are to be sewn on using navy blue thread. When sewing, make small stitches by going out through the tunic, and in through the badge. 17

19 Ranks badges are positioned midway on the upper arm, exactly halfway between the shoulder seem and the bottom elbow if in the proving position. The level badge is worn centred on the left cuff, and summer course badges are worn centred on the right cuff. The nametag is worn centred directly over right breast-pocket. Pants Pants must be kept clean, lint-free, fully flat-pressed, and are machinewashed when necessary. Creases are to be ironed on front and back of each pant leg. Rear creases meet at the top of pants at the centre belt loop. Front creases go up to the inner side of front belt loops. When standing up straight, the pant length should be at the first boot-lace, and never above the third boot-lace. Pants can be hemmed and adjusted if necessary. Belt The belt must be kept clean with no fraying of the black nylon. The brass buckle should be clean and scratch-free, and, when worn, is to be adjusted so the brass tip is immediately to the left of brass buckle, with no black nylon showing between the two ( brass on brass ). Socks The issued grey socks are to be worn at all times in uniform. If itchy, a thinner pair of socks can be worn underneath the grey ones. Boots The boots must be laced with the ladder-lace method pictured, and must be polished with Kiwi black shoe polish and a kiwi cloth. All the outside leather on boot should be polished. If they are dirty, boots must be washed prior to polishing. When polishing new boots, more polish and coats will be required at first to build up a base coat. When polishing, the Kiwi cloth should be wrapped around a finger, dabbed in water to moisten (but not dripping), and a small amount of polish applied. Use a circular motion with your finger. Parka The parka must be kept clean and lint-free. The inner parka (fleece) can be machine-washed if necessary. The outer parka (wind-breaker) should be hand-washed. The Inner and outer parka can be worn together or separate as necessary for the weather conditions, or as ordered. When worn, the zipper and buttons are either done all the way up, or lined up with chest seam. Rank slip-ons are to be worn at all times. 18

20 Positive Social Relations for Youth The PSRY program is designed to minimize conflicts between members of the cadet program. Cadets should know their rights and responsibilities, how to manage conflict, and where to go for help if a problem occurs. 19

21 Identification Name Phone Squadron Staff Squadron Contacts Commanding Officer Squadron Warrant Officer Recruiting Officer Supply Officer Recruit Flight NCOs Flight Commander Sqn Cell Phone: Sqn Website:

GREEN STAR DRILL. Adopt the Position of Attention

GREEN STAR DRILL. Adopt the Position of Attention GREEN STAR DRILL Adopt the Position of Attention, Stand at Ease and Stand Easy 1.The position of attention is one of readiness for a word of command. Alertness and exactness in this position is important,

More information

DRILL & CEREMONIAL RECRUIT

DRILL & CEREMONIAL RECRUIT DRILL & CEREMONIAL RECRUIT Australian Air Force Cadets Cadet / Instructor Notes Rewrite dated 20 February 2007 DRILL & CEREMONIAL RECRUIT (DCR) (11 PERIODS) DCR 1 Introduction to Drill and Ceremonial AL:B/2

More information

COMMON TRAINING PROFICIENCY LEVEL ONE INSTRUCTIONAL GUIDE SECTION 1 EO M ADOPT THE POSITIONS OF ATTENTION, STAND AT EASE AND STAND EASY

COMMON TRAINING PROFICIENCY LEVEL ONE INSTRUCTIONAL GUIDE SECTION 1 EO M ADOPT THE POSITIONS OF ATTENTION, STAND AT EASE AND STAND EASY COMMON TRAINING PROFICIENCY LEVEL ONE INSTRUCTIONAL GUIDE SECTION 1 EO M108.01 ADOPT THE POSITIONS OF ATTENTION, STAND AT EASE AND STAND EASY Total Time: 30 min PREPARATION PRE-LESSON INSTRUCTIONS Resources

More information

CHAPTER 3 SQUAD DRILL ON THE MARCH WITHOUT ARMS

CHAPTER 3 SQUAD DRILL ON THE MARCH WITHOUT ARMS CHAPTER 3 SQUAD DRILL ON THE MARCH WITHOUT ARMS FUNDAMENTALS 1. The Canadian Armed Forces (CAF) march and manoeuvre on foot in quick, slow and double time at the cadences and pace lengths described in

More information

2990 Lorne Scots Royal Canadian Army Cadet Corps Rifle Drill

2990 Lorne Scots Royal Canadian Army Cadet Corps Rifle Drill 2990 Lorne Scots Royal Canadian Army Cadet Corps Rifle Drill Page 1 of 27 TABLE OF CONTENTS PARA ITEM PAGE Section 1 BASIC RIFLE DRILL 1.1 INTRODUCTION 3 1.2 ATTENTION 5 1.3 STAND AT EASE FROM ATTENTION

More information

RIFLE DRILL. 1. General. Before commencing instruction in rifle drill, it is important that the cadets receive instruction in the parts of the rifle.

RIFLE DRILL. 1. General. Before commencing instruction in rifle drill, it is important that the cadets receive instruction in the parts of the rifle. RIFLE DRILL 1. General. Before commencing instruction in rifle drill, it is important that the cadets receive instruction in the parts of the rifle. 2. Rifle Movements. Unless stated otherwise, cadets

More information

2672 Hastings & Prince Edward Regiment Royal Canadian Army Cadet Corps. Lee Enfield No.4. Rifle Drill

2672 Hastings & Prince Edward Regiment Royal Canadian Army Cadet Corps. Lee Enfield No.4. Rifle Drill 2672 Hastings & Prince Edward Regiment Royal Canadian Army Cadet Corps Lee Enfield No.4 Rifle Drill Extracts from A-CR-CCP-053/PT001 March 2005 TABLE OF CONTENTS PARA ITEM PAGE Section 1 BASIC RIFLE DRILL

More information

AAC CADET INSTRUCTOR S HANDBOOK. CEREMONIAL DRILL, SMLE.303 and 7.62 mm SLR

AAC CADET INSTRUCTOR S HANDBOOK. CEREMONIAL DRILL, SMLE.303 and 7.62 mm SLR AAC CADET INSTRUCTOR S HANDBOOK CEREMONIAL DRILL, SMLE.303 and 7.62 mm SLR 2010 THIS PAGE INTENTIONALLY BLANK i PREFACE Aim 1. The aim of this publication is to provide Cadets with the information to conduct

More information

CHAPTER 3 - FOOT DRILL. 1. During the initial stages of training in foot drill, instruction is to be given in open order.

CHAPTER 3 - FOOT DRILL. 1. During the initial stages of training in foot drill, instruction is to be given in open order. CHAPTER 3 - FOOT DRILL BASIC FOOT DRILL 1. During the initial stages of training in foot drill, instruction is to be given in open order. 2. Exercises are to be taught first by numbers and when proficient,

More information

CHAPTER 10 COLOUR DRILL

CHAPTER 10 COLOUR DRILL 10-1 CHAPTER 10 COLOUR DRILL 10.1 This chapter contains Drill with Colours and is enclosed in the following lessons as listed below in Table 10 1. Table 10 1: Drill with Colours Reference Lesson 1 Lesson

More information

CHAPTER 7 DRILL WITH A SWORD

CHAPTER 7 DRILL WITH A SWORD 7-1 CHAPTER 7 DRILL WITH A SWORD 7.1 This chapter contains Drill with a Sword and is contained in the following lessons listed in Table 7 1. Table 7 1: Drill with a Sword Reference Lesson 1 Lesson 2 Lesson

More information

585 Rideau Squadron Royal Canadian Air Cadets Recruit Handbook for Training Year

585 Rideau Squadron Royal Canadian Air Cadets Recruit Handbook for Training Year 585 Rideau Squadron Royal Canadian Air Cadets Recruit Handbook for 2018-2019 Training Year This handbook belongs to: Cadet: (Last Name) - 1 - Contents CO s Welcome... 6 Contact 585 Squadron... 7 Weekly

More information

(All Arms Drill) A Joy

(All Arms Drill) A Joy ARMY CADET FORCE DRILL PRECIS (All Arms Drill) 1 DRILL PRECIS 1. Aims of Drill a. To produce a cadet who is proud, alert and obedient. b. To provide the basis of team work. 2. Definitions Alignment - A

More information

CANADIAN PATHFINDER ORGANISATION

CANADIAN PATHFINDER ORGANISATION CANADIAN PATHFINDER ORGANISATION MANUAL OF DRILL AND CEREMONIAL Rev. 09-Dec-08 THIS PAGE INTENTIONALLY BLANK FOREWORD It has been about 30 years since the Canadian Union Drill Manual was adopted through

More information

DRILL & CEREMONIAL PROFICIENCY. Australian Air Force Cadets. Cadet / Instructor Notes

DRILL & CEREMONIAL PROFICIENCY. Australian Air Force Cadets. Cadet / Instructor Notes DRILL & CEREMONIAL PROFICIENCY Australian Air Force Cadets Cadet / Instructor Notes Rewrite Edition, 1st May 2007 DRILL & CEREMONIAL (DCP) (12 Periods) DCP 1 Revision AL:2 Period(s): 1 Revise DCB 1-8.

More information

DRILL & CEREMONIAL BASIC. Australian Air Force Cadets. Cadet / Instructor Notes

DRILL & CEREMONIAL BASIC. Australian Air Force Cadets. Cadet / Instructor Notes DRILL & CEREMONIAL BASIC Australian Air Force Cadets Cadet / Instructor Notes Rewrite Edition, 1st April 2007 DCB 1 Revision AL: 2 Period(s): 2 Revise DCI 1 5 DCB 2 Compliments AL: 2 Period(s): 1 Practise

More information

Air Force Junior ROTC 30- STEP DRILL SEQUENCE INSTRUCTORS BOOKLET

Air Force Junior ROTC 30- STEP DRILL SEQUENCE INSTRUCTORS BOOKLET Air Force Junior ROTC 30- STEP DRILL SEQUENCE INSTRUCTORS BOOKLET 6 July 2017 1 INTRODUCTION TO DRILL AND CEREMONIES Drill consists of certain movements by which the flight or squadron is moved in an orderly

More information

CHAPTER 5 RIFLE DRILL AT THE HALT AUSTEYR

CHAPTER 5 RIFLE DRILL AT THE HALT AUSTEYR CHAPTER 5 RIFLE DRILL AT THE HALT AUSTEYR 5.1 This chapter contains Rifle Drill at the Halt (with the AUSTEYR) and is enclosed in the following lessons as listed below in Table 5 1. Reference Lesson 1

More information

INTRODUCTION. The foundation of this successful training is discipline.

INTRODUCTION. The foundation of this successful training is discipline. DRILL MANUAL INTRODUCTION The object of all forms of drill is to teach the individual to obey orders instantaneously and to carry them out correctly. Drill, therefore, teaches an Air Cadet obedience, steadiness

More information

Chapter 2 DRILL FOOT DRILL

Chapter 2 DRILL FOOT DRILL Chapter 2 DRILL FOOT DRILL SECTION 1. THE AIM AND PURPOSE OF DRILL INSTRUCTOR S NOTES Aim 0201. The aim of this section is to explain the purpose of drill and turnout and to teach the basic movements.

More information

CHAPTER 6 SWORD, PACE STICK AND CANE DRILL SECTION 1 SWORD DRILL

CHAPTER 6 SWORD, PACE STICK AND CANE DRILL SECTION 1 SWORD DRILL CHAPTER 6 SWORD, PACE STICK AND CANE DRILL SECTION 1 SWORD DRILL GENERAL 1. The sword (Figure 6-1-1) is one of the traditional badges of rank for those who hold Her Majesty s commission or warrant. It

More information

Royal Canadian Air Cadets SQUADRON TRAINING

Royal Canadian Air Cadets SQUADRON TRAINING Royal Canadian Air Cadets SQUADRON TRAINING L E V E L 1 ROYAL CANADIAN AIR CADET MANUAL PROFICIENCY LEVEL ONE HANDBOOK (Supersedes A-CR-CCP-266/PT-001 dated 1997-10-14.) Issued on Authority of the Chief

More information

CHAPTER 8 COLOURS AND FLAGS SECTION 1 GENERAL

CHAPTER 8 COLOURS AND FLAGS SECTION 1 GENERAL CHAPTER 8 COLOURS AND FLAGS SECTION 1 GENERAL DEFINITIONS 1. Cased Colours. Colours enclosed in a fabric case. 2. Colours. Consecrated ceremonial flags which are carried by, and mark the identity of, Canadian

More information

Arms Drills. This chapter contains rifle drills that are commonly used in parades. As far as possible, they are laid out in the order of priority.

Arms Drills. This chapter contains rifle drills that are commonly used in parades. As far as possible, they are laid out in the order of priority. Arms Drills Contents 1. Introduction 9. Marching with the Rifle 2. Parts of a Rifle 10. Saluting with the Rifle on the March 3. Attention, Stand at Ease and Stand Easy 4. Pledge Taking Advanced Arms Drills

More information

What is Drill? What is March?

What is Drill? What is March? What is Drill? Is the training or instruction by practical exercises, usually done with much repetition. Also to teach someone to do something by making them do repeated exercise. What is March? To work

More information

South Pacific Division of Seventh-day Adventists. Pathfinder Honour: Trainer s Notes. Drill & Marching 1

South Pacific Division of Seventh-day Adventists. Pathfinder Honour: Trainer s Notes. Drill & Marching 1 South Pacific Division of Seventh-day Adventists Pathfinder Honour: Trainer s Notes Drill & Marching 1 Instructions to Trainers / Instructors of this Honour Thankyou for being involved with this Honour.

More information

Key Terms. balance barrel bolt butt hand guard muzzle port arms sling stacking swivel stock trail arms trigger guard

Key Terms. balance barrel bolt butt hand guard muzzle port arms sling stacking swivel stock trail arms trigger guard Lesson 7 Stationary Movements with the M-1 Rifle Chapter 5 Key Terms balance barrel bolt butt hand guard muzzle port arms sling stacking swivel stock trail arms trigger guard What You Will Learn to Do

More information

DRILL AND CEREMONIAL ADVANCED. Australian Air Force Cadets. Cadet / Instructor Notes

DRILL AND CEREMONIAL ADVANCED. Australian Air Force Cadets. Cadet / Instructor Notes DRILL AND CEREMONIAL ADVANCED Australian Air Force Cadets Cadet / Instructor Notes Rewrite Edition, 1st April 2007 DRILL & CEREMONIAL ADVANCED (DCA) (12 PERIODS) Serial No Title & Objective Periods DCA

More information

CHAPTER 8 DRILL WITH A CANE

CHAPTER 8 DRILL WITH A CANE 8-1 CHAPTER 8 DRILL WITH A CANE 8.1 This chapter contains Drill with a Cane and is contained in the following lessons listed in Table 8 1. Table 8 1: Drill with a Cane Reference Lesson 1 Lesson 2 Lesson

More information

INTRODUCTION TO LEARN TO SERVE TO ADVANCE

INTRODUCTION TO LEARN TO SERVE TO ADVANCE DRILL MANUAL INTRODUCTION The object of all forms of drill is to teach the individual to obey orders instantaneously and to carry them out correctly. Drill, therefore, teaches an Air Cadet, obedience,

More information

LESSON 13: STATIONARY MOVEMENTS WITH THE M1 RIFLE

LESSON 13: STATIONARY MOVEMENTS WITH THE M1 RIFLE LESSON 13: STATIONARY MOVEMENTS WITH THE M1 RIFLE PURPOSE balance fall in parade rest port arms trail arms upper band (Note: Since there are many similarities between the manual of arms for the M1 and

More information

STUDENT OUTLINE INSTRUCTING DRILL MOVEMENTS (BLOCK 1) DI-2001D DRILL INSTRUCTOR SCHOOL M0681E2 04/29/2015

STUDENT OUTLINE INSTRUCTING DRILL MOVEMENTS (BLOCK 1) DI-2001D DRILL INSTRUCTOR SCHOOL M0681E2 04/29/2015 STUDENT OUTLINE INSTRUCTING DRILL MOVEMENTS (BLOCK 1) DI-2001D DRILL INSTRUCTOR SCHOOL M0681E2 04/29/2015 APPROVED BY DATE 1. LEARNING OBJECTIVES: a. TERMINAL LEARNING OBJECTIVES: (1) Without the aid of

More information

GENERAL COMMANDS - USED BY THE C.C.C. or M. A. STATIONARY MOVEMENT - COMMANDS

GENERAL COMMANDS - USED BY THE C.C.C. or M. A. STATIONARY MOVEMENT - COMMANDS Individual Drill 31 GENERAL COMMANDS - USED BY THE C.C.C. or M. A. STATIONARY MOVEMENT - COMMANDS 1. Fall In 2. Atten (Pause) tion or Honor Guard (Pause) Attention 3. Parade (Pause) Rest 4. Stand At (Pause)

More information

INTERNATIONAL ASSOCIATION LEGIONS OF HONOR

INTERNATIONAL ASSOCIATION LEGIONS OF HONOR INTERNATIONAL ASSOCIATION LEGIONS OF HONOR DRILL TEAM AND COLOR GUARD RULES OF COMPETITION Effective as of November 6, 2009 Table of Contents GENERAL INFORMATION... 1 DRILL TEAM... 2 GENERAL... 2 PERSONNEL

More information

MANUAL FOR DRILL AND PARADE

MANUAL FOR DRILL AND PARADE MANUAL FOR DRILL AND PARADE Compiled and Edited by P/M William Collins Copyright 2004 William Collins and the Glen Erin Pipe Band Association www.glenerinpipeband.com GLEN ERIN PIPE BAND MANUAL FOR DRILL

More information

CADET DRILL COMPETITIONS RULES AND PROCEDURES

CADET DRILL COMPETITIONS RULES AND PROCEDURES Serving the Youth of Manitoba Since 1941 AIR CADET LEAGUE OF CANADA (MANITOBA) INCORPORATED CADET DRILL COMPETITIONS RULES AND PROCEDURES P.O. Box 1011 Winnipeg, MB R3C 2W2 www.aircadetmanitoba.com aircadetleague.mb@gmail.com

More information

DRILLING AND MARCHING

DRILLING AND MARCHING DRILLING AND MARCHING Basic Terms A. Element: The individual, Unit, Club or other piece of a larger grouping B. Formation: The arrangement of Pathfinders, Units, Clubs or other elements in drill C. Line:

More information

LESSON 6: SQUAD DRILL

LESSON 6: SQUAD DRILL LESSON 6: SQUAD DRILL PURPOSE INTRODUCTION close interval double interval file flank formations line normal interval pivot rank This lesson introduces you to the basics of practicing squad drill. It covers

More information

LESSON 12: STATIONARY MOVEMENTS WITH THE M-1903 RIFLE

LESSON 12: STATIONARY MOVEMENTS WITH THE M-1903 RIFLE LESSON 12: STATIONARY MOVEMENTS WITH THE M-1903 RIFLE PURPOSE balance barrel bolt port arms sight sling sling swivel stacking swivel This lesson introduces the procedures for executing the manual of arms

More information

Drill and Ceremony Study Guide

Drill and Ceremony Study Guide Drill and Ceremony Study Guide 1. What are the three marching steps used in drill? 15 in step 30 in step 30 in step, DOUBLE TIME 180 steps per minute (the 18in step is used when formally stacking arms,

More information

All training is to be IAW Army doctrine, extant policy, manufacturer s specifications and Unit SOP s.

All training is to be IAW Army doctrine, extant policy, manufacturer s specifications and Unit SOP s. TRAINING OBJECTIVE 2.1.1 Revise drill one. Associated learning for this lesson is TO 1.1.1-1.1.8. Trainees are given 1 x 40-Min periods. Lesson is to be conducted by a qualified Junior Leader. Attainment

More information

APPENDIX C SKI DRILL. followed as in FM 157

APPENDIX C SKI DRILL. followed as in FM 157 APPENDIX C SKI DRILL Section I. INDIVIDUAL DRILL C-1. General Ski drill and ski training should be given concurrently. Ski drill is kept to the minimum necessary for assembly, organization, instruction,

More information

NAVY LEAGUE OF CANADA ONTARIO DIVISION

NAVY LEAGUE OF CANADA ONTARIO DIVISION ODI 2101 June 2017 NAVY LEAGUE OF CANADA ONTARIO DIVISION DIVISION ROUTINE FOR NAVY LEAGUE CADET CORPS 1. PURPOSE 1.1 The purpose of this order is to give guidance and instruction to Navy League Cadet

More information

RED CROSS YOUTH Foot-Drill (Fundamental) Cadets Guide. Name. School Unit

RED CROSS YOUTH Foot-Drill (Fundamental) Cadets Guide. Name. School Unit RED CROSS YOUTH Foot-Drill (Fundamental) Cadets Guide Name School Unit Version Control Version Control No. Date Author Remarks 1.0 April 2013 Jorin Ng Tan Qiu Yu 2.0 December 2013 Bertha Kwok Edited based

More information

CHAPTER 14 BAND DRILL SECTION 1 INTRODUCTION

CHAPTER 14 BAND DRILL SECTION 1 INTRODUCTION CHAPTER 14 BAND DRILL SECTION 1 INTRODUCTION GENERAL 1. Bands provide a regular marching cadence and musical accompaniment which, when combined with high standards of drill and precise manoeuvre, contribute

More information

Drill and Ceremony. Todd G. Everly, Director Michigan Ave, Ft. Myers FL, Tel. (239) Fax (239) Revision: 03/07/13

Drill and Ceremony. Todd G. Everly, Director Michigan Ave, Ft. Myers FL, Tel. (239) Fax (239) Revision: 03/07/13 Drill and Ceremony Todd G. Everly, Director 4312 Michigan Ave, Ft. Myers FL, 33905 Tel. (239) 334-3897 Fax (239) 334-8794 Revision: 03/07/13 TABLE OF CONTENTS DRILL AND CEREMONY 1.01 General 1 1.02 Purpose

More information

A PRACTICAL GUIDE TO YOUR TRAINING SESSIONS

A PRACTICAL GUIDE TO YOUR TRAINING SESSIONS A PRACTICAL GUIDE TO YOUR TRAINING SESSIONS WHEN and WHY? Once you have followed the advice in the How to Get Everything Learnt by Opening Day handout you will need to go back and to improve on the basic

More information

RECRUIT SUSTAINMENT PROGRAM SOLDIER TRAINING READINESS MODULES Drill and Ceremony Overview 1 September 2012

RECRUIT SUSTAINMENT PROGRAM SOLDIER TRAINING READINESS MODULES Drill and Ceremony Overview 1 September 2012 RECRUIT SUSTAINMENT PROGRAM SOLDIER TRAINING READINESS MODULES Drill and Ceremony Overview 1 September 2012 SECTION I. Lesson Plan Series Task(s) Taught Academic Hours References Student Study Assignments

More information

CHAPTER 7 - SQUAD DRILL. 1. When a squad moves off, the Directing Flank is to be indicated in the command, eg: By the left/right - quick - MARCH

CHAPTER 7 - SQUAD DRILL. 1. When a squad moves off, the Directing Flank is to be indicated in the command, eg: By the left/right - quick - MARCH CHAPTER 7 - SQUAD DRILL DIRECTING FLANK 1. When a squad moves off, the Directing Flank is to be indicated in the command, eg: By the left/right - quick - MARCH 2. When a squad is moving diagonally, the

More information

CHAPTER 14 BAND DRILL SECTION 1 INTRODUCTION

CHAPTER 14 BAND DRILL SECTION 1 INTRODUCTION CHAPTER 14 BAND DRILL SECTION 1 INTRODUCTION GENERAL 1. Bands provide a regular marching cadence and musical accompaniment which, when combined with high standards of drill and precise manoeuvre, contribute

More information

How do I enter the classroom? Before enter class Gum out & no food (water only clear bottle) Use restroom Don t loiter outside classroom

How do I enter the classroom? Before enter class Gum out & no food (water only clear bottle) Use restroom Don t loiter outside classroom How do I enter the classroom? Before enter class Gum out & no food (water only clear bottle) Use restroom Don t loiter outside classroom No talking straight to your seat! JROTC notebook/pen/pencil on desk

More information

Marching Fundamentals

Marching Fundamentals Marching Fundamentals The staff and Drum Majors use verbal commands for initiating marching fundamentals. Everyone should give verbal commands in rhythm using the same cadence. All CAPITAL letters are

More information

REGIONAL CADET SUPPORT UNIT (CENTRAL) CENTRAL REGION CADET BAND AND DRILL COMPETITION MANUAL

REGIONAL CADET SUPPORT UNIT (CENTRAL) CENTRAL REGION CADET BAND AND DRILL COMPETITION MANUAL REGIONAL CADET SUPPORT UNIT (CENTRAL) CENTRAL REGION CADET BAND AND DRILL COMPETITION MANUAL 2014-10-20 FOREWORD 1. The Central Region Cadet Band and Drill Competition Manual details rules and regulations

More information

LESSON 14: THE SABER AND THE SCABBARD

LESSON 14: THE SABER AND THE SCABBARD LESSON 14: THE SABER AND THE SCABBARD cant guard pistol belt port saber scabbard PURPOSE This lesson introduces you to the manual of arms for the saber. After you have mastered these procedures, you will

More information

Level 1. Period 1 Period 2 Period 3 PARTICIPATE IN ICE BREAKER ACTIVITIES IDENTIFY AIR CADET AND AIR OFFICER RANKS

Level 1. Period 1 Period 2 Period 3 PARTICIPATE IN ICE BREAKER ACTIVITIES IDENTIFY AIR CADET AND AIR OFFICER RANKS Level 1 LEVEL ONE Period 1 Period 2 Period 3 EO C103.02 C103.01 M107.01 9/12/2016 9/19/2016 9/26/2016 10/3/2016 10/10/2016 10/17/2016 10/24/2016 10/31/2016 11/7/2016 PARTICIPATE IN SELF- INTRODUCTIONS

More information

The Saber and the Scabbard. Key Terms. cant guard pistol belt port saber scabbard. Execute the manual of arms with the saber and the scabbard

The Saber and the Scabbard. Key Terms. cant guard pistol belt port saber scabbard. Execute the manual of arms with the saber and the scabbard Lesson 8 The Saber and the Scabbard Chapter 5 Key Terms cant guard pistol belt port saber scabbard What You Will Learn to Do Execute the manual of arms with the saber and the scabbard Linked Core Abilities

More information

Etiquette Badge. Definitions of etiquette: rules governing socially acceptable behavior. "Martial Arts without etiquette is street fighting"

Etiquette Badge. Definitions of etiquette: rules governing socially acceptable behavior. Martial Arts without etiquette is street fighting Etiquette Badge Definitions of etiquette: rules governing socially acceptable behavior "Martial Arts without etiquette is street fighting" Etiquette plays a significant role in Martial Arts training regardless

More information

Uniform Guide Uniform Guide - 1

Uniform Guide Uniform Guide - 1 Uniform Guide - 2018 Uniform Guide - 1 Rationale The Southern Hills Christian College uniform is intended to support our sense of community and healthy pride in our College, and to emphasise our character,

More information

a. Marine Corps Drill and Ceremonies Manual (MCO Series), Part I, Chapters 1 through 15 b. Basic Military Requirements (NAVEDTRA 14325)

a. Marine Corps Drill and Ceremonies Manual (MCO Series), Part I, Chapters 1 through 15 b. Basic Military Requirements (NAVEDTRA 14325) CHAPTER EIGHT: DRILL SECTION PAGE 0801 GENERAL.. 8-1 0802 INTRODUCTION TO DRILL... 8-1 0803 VOICE COMMANDS....... 8-3 0804 MOVEMENTS 8-5 0805 STEPS AND MARCHING. 8-14 0806 GUIDE AND GUIDON BEARER.. 8-19

More information

SHOT PUT - GLIDE TECHNIQUE

SHOT PUT - GLIDE TECHNIQUE SHOT PUT - GLIDE TECHNIQUE The Shot Put can be broken down to four different phases. Preparation/Glide/Delivery & Recovery. Preparation - The thrower sets up correctly to commence the glide. Glide - The

More information

UNIFORMS and GROOMING

UNIFORMS and GROOMING UNIFORMS and GROOMING The administration reserves the right to determine if the student meets the standards of the school regarding dress and grooming during the school day and at school events. In general,

More information

CANADIAN FORCES MANUAL OF DRILL AND CEREMONIAL

CANADIAN FORCES MANUAL OF DRILL AND CEREMONIAL CANADIAN FORCES MANUAL OF DRILL AND CEREMONIAL A-PD-201-000/PT-000 (Supersedes A-PD-201-000/PT-000 dated 1976-02-10) Issued on Authority on the Chief of the Defence Staff CHAPTER 1 INTRODUCTION.1/88 CHAPTER

More information

REGIONAL CADET SUPPORT UNIT (CENTRAL) CENTRAL REGION CADET BAND AND DRILL COMPETITION MANUAL

REGIONAL CADET SUPPORT UNIT (CENTRAL) CENTRAL REGION CADET BAND AND DRILL COMPETITION MANUAL REGIONAL CADET SUPPORT UNIT (CENTRAL) CENTRAL REGION CADET BAND AND DRILL COMPETITION MANUAL 2013-11-08 FOREWORD 1. The Central Region Cadet Band and Drill Competition Manual details rules and regulations

More information

Nautical Training Corps

Nautical Training Corps Nautical Training Corps COLOUR MANUAL 2008 INTRODUCTION This Manual has been produced to assist Officers, Senior Rates and Leading Rates of the Nautical Training Corps in obtaining the skills and drill

More information

Basic Steps to Remember

Basic Steps to Remember Lift those buns off the chairs. with these exercises. 1. Work your upper and lower body at the same time, beginning with legs, adding arms. 2. Alternate more vs. less strenuous movements. 3. If you get

More information

LESSON 7: PLATOON DRILL

LESSON 7: PLATOON DRILL LESSON 7: PLATOON DRILL cover double interval file flank formations interval line normal pivot DRILL TIPS Execute individual drill movements as previously described while performing as a squad member during

More information

MANUAL OF ARMS FOR THE RIFLE (M-1 GARAND) POSITION OF ORDER ARMS

MANUAL OF ARMS FOR THE RIFLE (M-1 GARAND) POSITION OF ORDER ARMS MANUAL OF ARMS FOR THE RIFLE (M-1 GARAND) In describing the manual of arms, the term, at balance, refers to a point on the rifle just forward of the trigger housing. Whenever a position is described as

More information

1 P a g e. Royal Canadian Sea Cadet Corps Centurion Marksmanship

1 P a g e. Royal Canadian Sea Cadet Corps Centurion Marksmanship 1 P a g e Royal Canadian Sea Cadet Corps Centurion Marksmanship 2 P a g e Marksmanship Manual Marksmanship training involves learning to fire the cadet air rifle. You will be taught many lessons about

More information

CHAPTER 4 U10 U13 2 PERSON RESCUE AND RESUSCITATION COMPETITION RULES AND PROCEDURES A GENERAL COMPETITION CONDITIONS C ERROR SCHEDULE

CHAPTER 4 U10 U13 2 PERSON RESCUE AND RESUSCITATION COMPETITION RULES AND PROCEDURES A GENERAL COMPETITION CONDITIONS C ERROR SCHEDULE CHAPTER 4 U0 U3 2 PERSON RESCUE AND RESUSCITATION COMPETITION RULES AND PROCEDURES A GENERAL. The 2 person R&R is conducted in the same arena as other R&R events and provides the opportunities to introduce

More information

THE HERMITAGE SCHOOL Inspiring Everyone to Learn Uniform Policy

THE HERMITAGE SCHOOL Inspiring Everyone to Learn Uniform Policy THE HERMITAGE SCHOOL Inspiring Everyone to Learn Uniform Policy Person Responsible: Deputy Headteacher Date Adopted: July 2013 Date of last review: Autumn Term 2018 Date of next review: Autumn Term 2021

More information

TAILS Turnout Gear Sizing Instructions. Get the right fit for comfort and protection beyond measure

TAILS Turnout Gear Sizing Instructions. Get the right fit for comfort and protection beyond measure TAILS Turnout Gear Sizing Instructions Get the right fit for comfort and protection beyond measure 2 The Importance of ACCURATE MEASUREMENTS To maximize first responder safety, proper fit of turnout gear

More information

AIR TRAINING 1. Completed first solo flight in either VH registered powered aircraft or glider.

AIR TRAINING 1. Completed first solo flight in either VH registered powered aircraft or glider. AAFC BADGES AND ACCOUTREMENTS AIR TRAINING 1 IMAGE DESCRIPTION ELIGIBILITY FOR CADETS First Solo Badge 2 Dark silver wreath with Completed first solo an eagle outstretched flight in either VH across the

More information

PEE WEE AND LIONS RULES AND SKILLS HANDOUT (April 2005) THE RULES

PEE WEE AND LIONS RULES AND SKILLS HANDOUT (April 2005) THE RULES PEE WEE AND LIONS RULES AND SKILLS HANDOUT (April 2005) THE RULES 1. When the whistle is blown by the coach, stand still, be quiet, and look at the coach; 2. If you want to speak raise your hand and wait

More information

2018 NEW MEXICO STATE JROTC MILITARY SKILLS MEET

2018 NEW MEXICO STATE JROTC MILITARY SKILLS MEET 2018 NEW MEXICO STATE JROTC MILITARY SKILLS MEET Hosted By: Albuquerque High School JROTC 7 April 2018 800 Odelia Rd NE Albuquerque, NM 87102 (505) 843-6400 Ext. 20316 gomez_g@aps.edu To: New Mexico JROTC

More information

ST. FRANCIS BORGIA GRADE SCHOOL UNIFORM POLICY (updated 9/2017)

ST. FRANCIS BORGIA GRADE SCHOOL UNIFORM POLICY (updated 9/2017) ST. FRANCIS BORGIA GRADE SCHOOL UNIFORM POLICY (updated 9/2017) The school uniform identifies our students as members of the St. Francis Borgia community. Out of a sense of pride and respect for our school,

More information

RAF DRILL AND CEREMONIAL

RAF DRILL AND CEREMONIAL AP 818 7th Edition RAF DRILL AND CEREMONIAL Approved by: Air Officer Administration Headquarters Personnel and Training Command 200 (Torquay) Squadron ATC Condensed Version i INTRODUCTION AP 818 1. Drill

More information

Stretching & Marching Sequence Chart - General

Stretching & Marching Sequence Chart - General Stretching & Marching Sequence Chart - General Exercise Description Counts Segment Warmup # Breathe and Stretch (2x) Breathe in 16 Head Roll (2x) Right, back 32 Shoulder Rotation (x + x) Up, down, up,

More information

Basic Shooting Skills Positions. By: Shannon Carlton

Basic Shooting Skills Positions. By: Shannon Carlton Basic Shooting Skills Positions By: Shannon Carlton Agenda Introduction Dominant Eye Rifle Fitting Prone Position Rifle Fitting Tips Standing Position Sequences Checklists Positions Stable Comfortable

More information

Sequence of Events with Parade Commands

Sequence of Events with Parade Commands Sequence of Events with Commands All parade positions and personnel with assigned duties will gather at the door of the front steps of the Legislature for 0900h to walk through the parade and commands

More information

Fielding Throwing and Catching Techniques, Practice and Drills

Fielding Throwing and Catching Techniques, Practice and Drills Fielding Throwing and Catching Techniques, Practice and Drills Not to be reproduced without permission 1 1) Teach proper Fielding mechanics Ball grip Hand, glove and arm position Proper stance Throwing/Catching

More information

IMPORTANT UNIFORM AND GENERAL APPEARANCE INFORMATION

IMPORTANT UNIFORM AND GENERAL APPEARANCE INFORMATION UNIFORM Years 3-6 IMPORTANT UNIFORM AND GENERAL APPEARANCE INFORMATION At The Portsmouth Grammar Junior School uniform is an important part of our school ethos. Our bespoke uniform instils in our pupils

More information

LEARN TO LEAD CIVIL AIR PATROL CADET PROGRAMS CADET DRILL GUIDE. October 2014 edition

LEARN TO LEAD CIVIL AIR PATROL CADET PROGRAMS CADET DRILL GUIDE. October 2014 edition LEARN TO LEAD CIVIL AIR PATROL CADET PROGRAMS CADET DRILL GUIDE October 2014 edition Why Cadets Drill CAP Drill Training Sequence The Demo-Perf Method Formations Fall In & Fall Out Attention Rests LEARN

More information

The Ohio State University Marching Band. Marching Fundamentals

The Ohio State University Marching Band. Marching Fundamentals The Ohio State University Marching Band Marching Fundamentals Revised 2009 The Ohio State University Marching Band Marching Fundamentals Written Reference Guide A basic system of marching fundamentals

More information

AP 3227 RAF BAND DRILL. 200 (Torquay) Sqn ATC Edition

AP 3227 RAF BAND DRILL. 200 (Torquay) Sqn ATC Edition AP 3227 RAF BAND DRILL 200 (Torquay) Sqn ATC Edition CHAPTER 1 FOREWORD 1. This manual should be read in conjunction with the Royal Air Force Manual of Drill and Ceremonial (AP818), to which it is complementary.

More information

Scout Association of Hong Kong Special Circular No. 07/2017

Scout Association of Hong Kong Special Circular No. 07/2017 Scout Association of Hong Kong Special Circular No. 07/2017 Tel:2957 6300 Fax:2302 1001 15 June 2017 To: All Scout Groups of Silver Jubilee District District Commissioner, Silver Jubilee District The Hong

More information

Rythmic Gymnastics. School Sports Rules - 1-

Rythmic Gymnastics. School Sports Rules - 1- Rythmic Gymnastics School Sports Rules 209 - - RYTHMIC GYMNASTICS RULES Divisions and categories Athletes will be classified according to their school level (elementary or high school). An athlete can

More information

1. Downward Facing Dog

1. Downward Facing Dog 1. Downward Facing Dog Come onto the hands and knees with your wrists underneath your shoulders and your knees underneath your hips. Inhale as you tuck your toes under your heels. Then exhale to lift your

More information

DRILL SEQUENCE (NUMBER 1)

DRILL SEQUENCE (NUMBER 1) DRILL SEQUENCE (NUMBER 1) Sizing 1 Tallest on the Right, Shortest on the, in Single Rank-Size 1.2.96 19 2 Squad-Number 1.2.97 19 3 Odd Numbers, Two paces Forward-March 1.2.98 19 4 1 Stand Fast, Ranks,

More information

The Golf Swing. The Fundamentals

The Golf Swing. The Fundamentals The Golf Swing The Fundamentals Fundamental #1 Grip & Set-Up The grip and set-up should be viewed as putting parts of a machine together. The right parts connected in the right way will allow the machine

More information

TECHNICAL PACKAGE ARCTIC SPORTS

TECHNICAL PACKAGE ARCTIC SPORTS 2016 TECHNICAL PACKAGE ARCTIC SPORTS 1. RULES: ARCTIC SPORTS Rules for Arctic Sports are derived from the traditional practices of the peoples of the Arctic. In general, this competition will be conducted

More information

Marching and Procedures Handbook

Marching and Procedures Handbook FAU Owl Handbook 1 The Florida Atlantic University MARCHING OWLS Marching and Procedures Handbook 2013-2014 FAU Owl Handbook 2 Marching Fundamentals THE FLORIDA ATLANTIC UNIVERSITY MARCHING OWLS The following

More information

FUNDAMENTAL SOFTBALL SKILLS (DEVELOPING FUNDAMENTAL SKILLS)

FUNDAMENTAL SOFTBALL SKILLS (DEVELOPING FUNDAMENTAL SKILLS) FUNDAMENTAL SOFTBALL SKILLS (DEVELOPING FUNDAMENTAL SKILLS) Learning outcomes: At the completion of this Module the candidate will be able to: Identify the fielding positions in softball and the responsibilities

More information

PART 6 DRILL DOWN. G. Allow the participants to choose where they will stand within the formation of the drill down.

PART 6 DRILL DOWN. G. Allow the participants to choose where they will stand within the formation of the drill down. PART 6 DRILL DOWN 6.1 GENERAL RULES: 6.1.1. The number of Drill Downs, number of awards given and number of participants each team may enter in Drill Down will be determined by the organizers of each local

More information

Specialists Philosophy

Specialists Philosophy Specialists Philosophy The special teams include a variety of players form the offense and defense. In addition, we will have a few players that play major roles on special teams. These are our specialists,

More information

A Note From The Commander

A Note From The Commander A Note From The Commander Cincinnati Compatriots... The Manual of Arms that we are practicing within the Nolan Carson Memorial Color Guard is consistent with the Von Steuben Order of Drill from 1777. However,

More information

Player Development. Pitching 1

Player Development. Pitching 1 Pitching Player Development Pitching 1 Delivery Mechanics Checklist: 1. Feet slightly spread on throwing arm side of rubber 2. Body weight positioned over stride leg 3. Torso upright 4. Hips and shoulders

More information

EXERCISE GUIDE STRENGTHEN YOUR CORE

EXERCISE GUIDE STRENGTHEN YOUR CORE EXERCISE GUIDE STRENGTHEN YOUR CORE BACK EXTENSION WITH BALL Rest your belly on the ball, feet planted wide apart on the floor behind you and hands resting on your lower back. Peel your chest away from

More information

Little League Pitching Mechanics - Simple Instructions For Little League

Little League Pitching Mechanics - Simple Instructions For Little League Little League Pitching Mechanics - Simple Instructions For Little League Pitchers By Steven Ellis, former Chicago Cubs pitching pro The goal for any Little League coach or parent is to keep the game simple

More information

Shirt Measurement Guide

Shirt Measurement Guide Shirt Measurement Guide Please stand and breath normally during measuring. Do not blow out or in, stomach or chest. Please measure in inches and sum it to the nearest 1/4, 1/2 or 3/4 of the inches. 1.

More information

Forearm Pass (Bump) with Partner Start with toss. Use the forearm pass to rally back and forth with your partner.

Forearm Pass (Bump) with Partner Start with toss. Use the forearm pass to rally back and forth with your partner. Forearm Pass (Bump) with Partner Start with toss. Use the forearm pass to rally back and forth with your partner. Ready Position Place feet shoulder width apart with toes pointed straight ahead. Place

More information