Subway Tile Bathroom Walls [1]

Size: px

Start display at page:

Download "Subway Tile Bathroom Walls [1]"

Alberta Dinah Bryant
5 years ago
Views:

1 [1] Submitted by Ana White [2] on Fri, :18 Page 1 of 33

2 [1] Page 2 of 33

3 Well, the bathroom in Momplex Unit A got a change order. When we realized there was a good chance [3] this little guy, Page 3 of 33

4 Might get potty trained in this bathroom, Page 4 of 33

5 We decided we simply must subway tile the walls. Because there is no other reason to add subway tile to walls, is there, than pure practicality, right??? That's what I reasoned to the Ram. This is not a cosmetic thing at all. I actually don't, uh, hate the boring white walls. ;) Page 5 of 33

6 Pure practicality, I tell you! So here's the first rule of tiling walls: Expect nothing to be level. Page 6 of 33

7 Nothing. Not the floor, not the walls, not the ceiling. The only thing you can be sure is level in a room is your level. So we decided we'd start tiling one block of tiles up, on a level line that Page 7 of 33

8 we draw with a level. So I measured the overall height of a block of subway tiles, added a teeny bit for the bottom grout line, Page 8 of 33

9 Marked the wall in the middle of the room, this distance up from the floor, Page 9 of 33

10 And used the level to transfer that mark around the room. Then I decided one of the walls was a little long, and thought, why not add a cleat to the underside of the line, to both give us a guide to work off of and support the wall tiles? Page 10 of 33

11 So I screwed a scrap 1x2 up on the wall. Page 11 of 33

12 Then the baby fell asleep, so we couldn't run the saw, so we just did the one board. And lived to regret it. The cleat on the wall really helped out. Page 12 of 33

13 Then we mixed up mortar, just right (too thin and your tiles will slip, too thick and it will be hard to work with), and troughed it on the wall. Page 13 of 33

14 Page 14 of 33

15 And started sticking tiles to the wall. By sticking, I of course mean pressing firmly with a slight twisting motion. NOTE: If you are tiling, you may wish to start in the center and work outward depending on your tile size and wall length. We did do quite a bit of figuring and determined starting with a full tile would leave us in the best position on the opposite wall. Page 15 of 33

16 The subway tiles are nice for bathrooms where you have to cut tiles around plumbing and other stuff. You can break the blocks of tile up by just cutting the mesh backs, and then you just have to cut the individual tiles to fit around things like plumbing pipes or electrical boxes. Page 16 of 33

17 The spacers help to keep everything aligned - yes, I fixed that bigger than it should be gap to the top left. Page 17 of 33

18 After every row, we used a level to double check and make sure we are staying straight. The human eye is an amazing thing and can pick up very slight out of levelness. Page 18 of 33

19 For the top row, we ended up choosing a bullnose tile in the same material and color. We buttered the backs, Page 19 of 33

20 And set the tiles at the top. I had considered a different border tile (the ones that stick out like a ledge), but since a mirror will hang over the drywall and tile, I thought the bullnose would offer the best transition. Once we got the rows above our level line and wood cleat, it's time to go back and tile the bottom row. Page 20 of 33

21 It was definitely much less fun doing the bottom row (a duty reserved for the shortest person on the job), but we are glad we did it this way. Page 21 of 33

22 We did have to rip a tiny bit off the far end tiles at the bottom, because our floor "grew" on us, but it was not a big deal and certainly beat our tiles and grout lines going uphill on us. Page 22 of 33

23 Ah, isn't that beautiful??? Uh, I mean, so practical? Page 23 of 33

24 So wipe clean? So potty training friendly? Page 24 of 33

25 Next, we grout. Page 25 of 33

26 And grout some more. All the while, I'm thinking, but I liked the darker grout lines better. I shouldn't be putting white grout up. Page 26 of 33

27 Then we wipe excess grout off, and I'm thinking, definitely should have used a gray grout. Page 27 of 33

28 Yes, definitely should have :( Maybe I'll paint the upper part of the wall a light gray. Or wedgewood Page 28 of 33

29 blue. Not that this is about looks at all, right? Now what to do about those unsightly plumbing pipes? Page 29 of 33

30 We covered them with stainless fittings and covers of course. Page 30 of 33

31 And a DIY vanity [4] complete with a decorative stainless p-trap. Am I loosing it for wanting to crawl in there and go all RustOleum Silver crazy on those copper pipes that you can't see without a flashlight? After a little sealer over the grout, we are done! Page 31 of 33

32 Ah, the things we do for our kids. Page 32 of 33

33 Have a great weekend! XO Ana + Family PS - Love subway tile too? Check out this subway tile backsplash [5] we DIYed a little while back. PSS - Congrats to megcaton for winning my tilesaw that we gave away in this backsplash post! [6] main_category: Momplex [7] Sponsor Box: <script type="text/javascript" src=" memedia.com/script_serve.php?st=hhm.anawhite&zn=lowes&sz=300x 60"></script> Momplex: Baths [8] Source URL: le-bathroom-walls Links [1] m-walls [2] [3] [4] [5] &source=web&cd=1&cad=rja&uact=8&ved= 0CB0QFjAA&url=http%3A%2F%2Fana-white.com%2F2014%2F03% 2Fmomplex%2Fsubway-tile-backsplash-install&ei=upCkU-_ILcT5oA SL64GoBA&usg=AFQjCNHe-h22O2uXq2T0eJni0YQ2fCvJEQ&si g2=sfts6ofiepyijuxnqf8gzw&bvm=bv ,d.cgu [6] [7] [8] Page 33 of 33

JEFF GORDON BACK IN BAY AREA FOR THE DODGE/SAVE MART 350 AT INFINEON RACEWAY ON SUNDAY, JUNE 22, 2003

JEFF GORDON BACK IN BAY AREA FOR THE DODGE/SAVE MART 350 AT INFINEON RACEWAY ON SUNDAY, JUNE 22, 2003 Vallejo native Jeff Gordon, driver of the No. 24 DuPont Chevrolet on the NASCAR Winston Cup circuit,