SPACERS, EXPANSION JOINTS AND PROFILES

Transcription

1 SINCE 974 INNOVATIONS FOR THE TILE SETTING PROFESSIONAL SPACERS, EXPANSION JOINTS AND PROFILES REMOVABLE AND REUSABLE DUAL SIZE (JOINT) SPACER DOUBLE...R2 SPACERS FOR 20 mm THICKNESS TILES SPACERS FOR 20 mm THICKNESS TILES...R3 SPACERS FOR + AND T SETTING LAYOUT 0 mm...r4 9 mm...r4 8 mm...r4 7 mm...r4 6 mm...r5 5 mm...r5 4 mm...r5 3 mm...r6 2 mm...r6,5 mm...r6 mm...r6 SPACERS FOR OCTAGONAL TILES, CASSETTONATO AND LOZENGE, SPACERS FOR HEXAGONAL TILES, SPACERS FOR PROVINCIAL - PROVENZALE SPACERS FOR OCTAGONAL TILES, CASSETTONATO AND LOZENGE...R7 SPACERS FOR HEXAGONAL TILES...R7 SPACERS FOR PROVINCIAL - PROVENZALE...R7 WEDGES BIG WEDGES...R7 SMALL WEDGES...R7 FLOATING FLOORS SUPPORTS FLOATING FLOORS SUPPORTS...R7 EXPANSION JOINTS AND PROFILES EXPANSION JOINTS...R8 PVC TRANSITION PROFILES...R8 sizes (from to 0 mm - /32-3/8 ) in 39 different models : here is our range of spacers. A line of spacers for the professional which can choose versions with different heights, with holes for the passage of the adhesive, with fins for easy removal or to avoid the outcrop if installing with the traditional mud-med method, or even with the unique Lego system, which allows to fit a spacer over the other to get the desired thickness. Of course, both for cross and T installation. In addition, three models (3 mm - /8 joint) for octagonal tile, cassettonato, lozenge, hexagonal tiles, provenzale tiles. To complete the offer, shimming wedges are available in two sizes, the largest with ergonomic grip design, large and knurled. Also expansion joints, profiles and floating floors supports and the new spacers designed for the laying of tiles with high thickness (20 mm - 3/4 ), whose characteristics make them ideal for outdoor floors. Last, but not least, the new removable and reusable dual size (joint) spacer DOUBLE, available in two versions, each one designed to create two joints of differ ent sizes (one model for joints of and 3 mm - /32 and /8, one model for joints 2 and 5 mm - 3/32 and 3/6 ). Designed to work on the sides of the tiles and flush to the floor as well as into corners. This is particularly helpful for wall covering.

2 REMOVABLE AND REUSABLE DUAL SIZE (JOINT) SPACER mm /32 3 mm /8 282D-3C300 Rear view (flat facet) 282D-3C300 Front view 2 mm 3/32 5 mm 3/6 282D2-5C300 Rear view (flat facet) 282D2-5C300 Fro nt view SPACERS, EXPANSION JOINTS AND PROFILES Available in two versions: to create joint sized and 3 mm - /32 and /8 (grey color); to create joints sized 2 and 5 mm - 3/32 and 3/6 (red color). Each DOUBLE is designed to create two joints of different sizes: two sides for one joint size, the other two for the other joint size. Therefore, DOUBLE is actually a Dual-Size removable (and reusable) spacer. The dual size (joint) spacer DOUBLE has been de signed to be very easy to remove after use. This in accordance with regulations about correct ceramic tile installation such as the Italian UNI The removal and use do not damage the product therefore DOUBLE is reusable virtually forever. Its generous dimensions (37x37 mm /2 x /2 ) make very easy to grasp it both during insertion and, even more important, removal phase. The wide gap within joints sizes present on the same spacer makes it easy to recognize them. Thanks to the wide contact surface between tiles once in working position, DOUBLE ensures both DOUBLE -3 mm (/32 - /8 ) and 2-5 mm (3/32-3/6 ) Joint Color 282D-3C DOUBLE SPACER; joint and 3 mm (/32 - /8 ). 300 pcs bucket. 282D2-5C DOUBLE SPACER; joint 2 and 5 mm (3/32-3/6 ). 300 pcs bucket. perfect joint size and parallelism of the tiles. DOUBLE is designed to work on the sides of the tiles (not into intersections) so to ensures the maximum effectiveness (especially on large format tiles). One of the two facets of DOUBLE is flat so to allow the product to be used flush to the floor as well as into corners. This is particularly helpful for wall covering. DOUBLE is made of plastic material which hinders the adhesion of the adhesive (thin-set) to the spacer. Double is proposed inside a practical resealable bucket for storing the product after use. and 3 mm /32 e /8 2 and 5 mm 3/32 e 3/6 58x20xh 27 cm 23 x8 x h 0 /2 5,5 Kg 2. lbs 6,9 Kg 5.2 lbs R2

3 SPACERS FOR 20 mm (3/4 ) THICKNESS TILES JOINT 4 mm (5/32 ) mm 64mm 64mm 2mm 5/32 2 /2 2 /2 5/32 33T200 33T500 4mm 64mm 34mm 2mm 5/32 2/2 /32 5/32 Spacers for tiles/slabs with a thickness equal or higher than 20 mm (3/4 ). Available both + and T types. Perfect for outdoor floors laid both with adhesive or onto sand. Made of plastic material which is tested for being resistant even when subjected to bad weather conditions and thermal stress. Type Pieces Equipped with special wings, designed for preventing the rising of the spacer during the vibrator method. The special wings are also provided with specific openings with draining function. Spacer s height: 2 mm (/2 ) ,7 Kg 2.4 lbs x30xh40 cm 9,2 Kg 20.3 lbs 33T /8 x 7/8 xh 5 5/4 Kg 24.3 lbs 33T ,4 Kg 25. lbs SPACERS, EXPANSION JOINTS AND PROFILES R3

4 SPACERS 0 mm 3/ mm 40mm 40mm 7mm 3/8 9/6 9/6 9/ R200 0mm 50mm 50mm 3mm 3/ /32 93T T200 0mm 40mm 25mm 7mm 3/8 9/6 9/32 204T200A 0mm 50mm 30mm 3mm 3/8 2 3/6 7/32 Type Pieces x42xh 54 cm 24 3/8 x6 /2 xh 2/4 26,5 Kg 58.4 lbs x46xh 28 cm 8 7/8 x8 /8 xh 0,6 Kg 23.3 lbs 204R x46xh 28 cm 8 7/8 x8 /8 xh 9,2 Kg 20.3 lbs 93T x42xh 54 cm 24 3/8 x6 /2 xh 2 /4 20,2 Kg 44.5 lbs 204T x35xh 28 cm 8 7/8 x3 3/4 xh 7,4 Kg 6.3 lbs 204T200A x35xh 28 cm 8 7/8 x3 3/4 xh 6,6 Kg 4.5 lbs SPACERS 9 mm / mm 50mm 50mm 7mm / /32 29T000 28T200 9mm 50mm 30mm 7mm /32 2 3/6 9/32 Type Pieces x42xh 54 cm 24 3/8 x6 /2 xh 2 /4 32,2 Kg 70.9 lbs x46xh 28 cm 8 7/8 x8 /8 xh 3,6 Kg 29.9 lbs 29T x42xh 54 cm 24 3/8 x6 /2 xh 2 /4 26,7 Kg 58.8 lbs 28T x35xh 28 cm 8 7/8 x3 3/4 xh 0,6 Kg 23.3 lbs SPACERS, EXPANSION JOINTS AND PROFILES SPACERS 8 mm 5/ mm 40mm 40mm 7mm 5/6 9/6 9/6 9/32 Type Pieces SPACERS 7 mm 9/32 372T T200 8mm 40mm 25mm 7mm 5/6 9/6 9/ x42xh 54 cm 24 3/8 x6 /2 xh 2 /4 23, Kg 50.9 lbs x46xh 28 cm 8 7/8 x8 /8 xh 9,6 Kg 2.2 lbs 372T x4xh 32 cm 8 /8 x6 /8 xh 2 5/8 2,7 Kg 27.9 lbs 376T x35xh 28 cm 8 7/8 x3 3/4 xh 7,6 Kg 6.7 lbs E 5+200E 7mm 40mm 40mm 7mm 9/32 9/6 9/6 9/ L 5+200L 7mm 40mm 40mm 5mm 9/32 9/6 9/6 3/6 52T000E 5T200E 7mm 40mm 25mm 7mm 9/32 9/6 9/32 Type Pieces E x42xh 54 cm 24 3/8 x6 /2 xh 2 /4 26 Kg 57.3 lbs 5+200E x46xh 28 cm 8 7/8 x8 /8 xh 0,6 Kg 23.4 lbs L x42xh 45 cm 24 3/8 x6 /2 xh 2 /4 8,4 Kg 40.5 lbs 5+200L x35xh 28 cm 8 7/8 x3 3/4 xh 5,6 Kg 2.3 lbs 52T000E x4xh 32 cm 8 /8 x6 /8 xh 2 5/8 3,3 Kg 29.3 lbs 5T200E x35xh 28 cm 8 7/8 x3 3/4 xh 9,6 Kg 2.2 lbs R4

5 SPACERS 6 mm / mm 50mm 50mm 7mm / / T200 6mm 50mm 28mm 7mm /4 2 7/64 9/32 Type Pieces x42xh 54 cm 24 3/8 x6 /2 xh 2 /4 8,8 Kg 4.4 lbs x46xh 28 cm 8 7/8 x8 /8 xh 8,3 Kg 7.9 lbs 54T x4xh 32 cm 8 /8 x6 /8 xh 2 5/8 0,9 Kg 24lbs 53T x35xh 28 cm 8 7/8 x3 3/4 xh 8, Kg 7.8 lbs SPACERS 5 mm 3/ mm 50mm 50mm 6mm 3/6 2 2 / L L 5mm 40mm 40mm 5mm 3/6 9/6 9/6 3/6 56R000S 55R200 5mm 50mm 50mm 6mm 3/ /32 56T000 55T200 5mm 35mm 28mm 6mm 3/6 3/8 7/64 /4 56T000E 55T200E 5mm 35mm 28mm 6mm 3/6 3/8 7/64 /4 Type Type Pieces x42xh 54 cm 24 3/8 x6 /2 xh 2 /4 5 Kg 33 lbs x46xh 28 cm 8 7/8 x8 /8 xh 5,6 Kg 2.4 lbs L x42xh 45 cm 24 3/8 x6 /2 xh 7 3/4 6,8 Kg 37 lbs L x35xh 28 cm 8 7/8 x3 3/4 xh 5,6 Kg 2.4 lbs 56R000S x42xh 45 cm 24 3/8 x6 /2 xh 7 3/4 3,8 Kg 30.4 lbs 55R x46xh 28 cm 8 7/8 x8 /8 xh 6,6 Kg 4.5 lbs 56T x4xh 32 cm 8 /8 x6 /8 xh 2 5/8 8, Kg 7.8 lbs 55T x35xh 28 cm 8 7/8 x3 3/4 xh 6 Kg 3.2 lbs 56T000E x4xh 32 cm 8 /8 x6 /8 xh 2 5/8 4, Kg 3 lbs 55T200E x32xh 28 cm 2 9/6 x2 9/6 xh 6,8 Kg 5 lbs mm 38mm 38mm 4mm 5/32 3/64 3/64 5/32 58R000 57R200 4mm 30mm 30mm 6mm 5/32 3/6 3/6 /4 Pieces 58T000 57T200 4mm 38mm 20mm 4mm 5/32 3/64 25/32 5/32 SPACERS 4 mm 5/ x42xh 45 cm 24 3/8 x6 /2 xh 7 3/4 20,7 Kg 45.5 lbs x35xh 28 cm 8 7/8 x3 3/4 xh 8,6 Kg 8.9 lbs 58R x42xh 45 cm 24 3/8 x6 /2 xh 7 3/4 22,4 Kg 49.3 lbs 57R x32xh 28 cm 2 9/6 x2 9/6 xh 6,9 Kg 5.2 lbs 58T x4xh 32 cm 8 /8 x6 /8 xh 2 5/8 0, Kg 22.3 lbs 57T x32xh 28 cm 2 9/6 x2 9/6 xh 5,2 Kg.5 lbs SPACERS, EXPANSION JOINTS AND PROFILES R5

6 SPACERS 3 mm / mm 38mm 38mm 3,5mm /8 3/64 3/64 9/ E E 3mm 28mm 28mm 3mm /8 7/64 7/64 /8 60+T T200 3mm 38mm 38mm 8mm /8 3/64 3/64 5/6 60R000 59R200 3mm 38mm 38mm 3,5mm /8 3/64 3/64 9/ A A 3mm 38mm 38mm 8mm /8 3/64 3/64 5/6 60T000 59T200 3mm 38mm 20mm 3,5mm /8 3/64 25/32 9/32 Type Pieces x42xh 45 cm 24 3/8 x6 /2 xh 7 3/4 7,6 Kg 38.8 lbs x35xh 28 cm 8 7/8 x3 3/4 xh 6,6 Kg 4.5 lbs E x42xh 40 cm 6 /2 x6 /2 xh 5 3/4 4 Kg 30.9 lbs E x32xh 28 cm 2 9/6 x2 9/6 xh 4,9 Kg 0.8 lbs 60+T x42xh 45 cm 24 3/8 x6 /2 xh 7 3/4 9,6 Kg 43.2 lbs 59+T x35xh 28 cm 8 7/8 x3 3/4 xh 6,6 Kg 4.5 lbs 60R x42xh 45 cm 24 3/8 x6 /2 xh 7 3/4 4,3 Kg 3.5 lbs 59R x35xh 28 cm 8 7/8 x3 3/4 xh 6,6 Kg 4.5 lbs A x42xh 45 cm 24 3/8 x6 /2 xh 7 3/4 8,8 Kg 4.4 lbs A x35xh 28 cm 8 7/8 x3 3/4 xh 7,5 Kg 6.5 lbs 60T x4xh 32 cm 8 /8 x6 /8 xh 2 5/8 8,5 Kg 8.7 lbs 59T x32xh 28 cm 2 9/6 x2 9/6 xh 4 Kg 8.8 lbs SPACERS 2 mm 3/ mm 28mm 28mm 2,8mm 3/32 7/64 7/64 7/ A A 2mm 28mm 28mm 7mm 3/32 7/64 7/64 9/32 33R000 32R200 2mm 28mm 28mm 2,8mm 3/32 7/64 7/64 7/64 33R000A 32R200A 2mm 28mm 28mm 7mm 3/32 7/64 7/64 9/32 33T000 32T200 2mm 28mm 6mm 2,8mm 3/32 7/64 5/8 7/64 Type Pieces SPACERS, EXPANSION JOINTS AND PROFILES x42xh 40 cm 6 /2 x6 /2 xh 5 3/4,2 Kg 24.7 lbs x32xh 28 cm 2 9/6 x2 9/6 xh 3,4 Kg 7.5 lbs A x4xh 32 cm 8 /8 x6 /8 xh 2 5/8,4 Kg 25 lbs A x32xh 28 cm 2 9/6 x2 9/6 xh 4,2 Kg 9.3 lbs 33R x42xh 45 cm 24 3/8 x6 /2 xh 7 3/4 8, Kg 7.8 lbs 32R x32xh 28 cm 2 9/6 x2 9/6 xh 5,6 Kg 34.4 lbs 33R000A x42xh 45 cm 24 3/8 x6 /2 xh 7 3/4,2 Kg 24.6 lbs 32R200A x32xh 28 cm 2 9/6 x2 9/6 xh 4,5 Kg 9.8 lbs 33T x42xh 40 cm 6 /2 x6/2 xh 5 3/4 8,9 Kg 9.6 lbs 32T x32xh 28 cm 2 9/6 x2 9/6 xh 2,4 Kg 5.3 lbs 32T200A x32xh 28 cm 2 9/6 x2 9/6 xh 2,4 Kg 5.3 lbs SPACERS,5 mm / ,5mm 33mm 33mm 5mm /6 5/6 5/6 3/6 Type Pieces x42xh 45 cm 24 /2 x6 /2 xh 7 3/4 8 Kg 7.6 lbs x4xh 32 cm 8 x6 xh 2 /2 3 Kg 6.6 lbs SPACERS mm / mm 28mm 28mm 3mm /32 7/64 7/64 /8 43T000 43T200 mm 32mm 6mm 4mm /32 3/6 5/8 5/32 Type Pieces x42xh 40 cm 6 /2 x6 /2 xh 5 3/4 7 Kg 5.4 lbs x32xh 28 cm 2 9/6 x2 9/6 xh,9 Kg 4.2 lbs 43T x42xh 40 cm 6 /2 x6 /2 xh 5 3/4 7 Kg 5.4 lbs 43T x32xh 28 cm 2 9/6 x2 9/6 xh,9 Kg 4.2 lbs R6

7 WEDGES 63P000 62P200 28mm 0mm 6mm 7/64 3/32 /4 63G000 62G200 40mm 9mm 8mm 9/6 /32 5/6 Type Pieces 63P x42xh40 cm 6 /2 x6 /2 xh 5 3/4 8,2 Kg 40. lbs 62P x32xh28 cm 2 9/6 x2 9/6 xh 5,4 Kg.9 lbs 63G x42xh45 cm 24 3/8 x6 /2 xh 7 3/4 20,5 Kg 45. lbs 62G x32xh28 cm 2 9/6 x2 9/6 xh 4,2 Kg 9.3 lbs SPACERS FOR OCTAGONAL TILES, CASSETTONATO AND LOZENGE (3 mm /8 ) 6Y200 3mm 6mm /8 /4 Type Pieces 6Y x32xh 28 cm 2 9/6 x2 9/6 xh 3,6 Kg 7.9 lbs SPACERS FOR HEXAGONAL TILES (3 mm /8 ) Type Pieces 6E200 3mm 5mm /8 6/6 6E x32xh 28 cm 2 9/6 x2 9/6 xh 4,4 Kg 9.7 lbs Type Pieces 6P200 3mm 6mm /8 /4 SPACERS FOR PROVINCIAL PROVENZALE (3 mm /8 ) 6P x32xh 28 cm 2 9/6 x2 9/6 x h 4,4 Kg 9.7 lbs FLOATING FLOORS SUPPORTS SPACERS, EXPANSION JOINTS AND PROFILES 32P300 S O H 4mm 50mm 6mm 9/6 55/6 /6 Type Pieces 32P x45xh 45 cm 25 9/6 x7 3/4 xh 7 3/4 27,4 Kg 60.4 lbs R7

8 EXPANSION JOINTS AND PROFILES /405/406 EXPANSION JOINTS FOR THIN-SET ADHESIVE SPACERS, EXPANSION JOINTS AND PROFILES COLOR External Internal 400 7X8G Raiflex joint grey clear 400 9X8G Raiflex joint grey clear 400 X8G Raiflex joint grey clear 400 3X8G Raiflex joint grey clear 400 5X8G Raiflex joint grey clear X8GG Raiflex joint light grey light grey EXPANSION JOINTS FOR MORTAR / MUD COLOR External Internal 40 23X8G Raiflex joint grey clear 40 35X8G Raiflex joint grey clear 40 45X8G Raiflex joint grey clear PVC TRANSITION PROFILES 404TRIM6B Jolly PVC withe 404TRIM6G Jolly PVC grey 405TRIM8B Jolly PVC withe 405TRIM8G Jolly PVC grey 406TRIM0B Jolly PVC withe 406TRIM0G Jolly PVC grey 8 mm 5/6 8 mm 5/6 8 mm 5/6 8 mm 5/6 8 mm 5/6 8 mm 5/6 8 mm 5/6 8 mm 5/6 8 mm 5/6 S H Total Qty 7 mm 9/32 9 mm 23/64 mm 7/6 3 mm 33/64 5 mm 9/32 9 mm 3/4 250 cm 8 2 /2 250 cm 8 2 /2 250 cm 8 2 /2 250 cm 8 2 /2 250 cm 8 2 /2 250 cm 8 2 /2 00 m m m m m m 328 S H Total Qty 25 mm 3/32 35 mm 3/8 45 mm 3/4 250 cm 8 2 /2 250 cm 8 2 /2 250 cm 8 2 /2 00 m m m 64 COLOR H Total Qty 254x2xh 9 cm 00 x4 3/4 xh 3 /2 254x2xh 9 cm 00 x4 3/4 xh 3 /2 254x2xh 9 cm 00 x4 3/4 xh 3 /2 254x2xh 9 cm 00 x4 3/4 xh 3 /2 254x2xh 9 cm 00 x4 3/4 xh 3 /2 254x6xh 9 cm 00 x6 /4 xh 3 /2 254x2xh 9 cm 00 x4 3/4 xh 3 /2 254x6xh 9 cm 00 x6 /4 xh 3 /2 254x6xh 9 cm 00 x6 /4 xh 3 /2 8,3 Kg 8.3 lbs,5 Kg 25.3 lbs 4,7 Kg 32.4 lbs 7,9 Kg 39.4 lbs 2, Kg 6.5 lbs 6 Kg 35.3 lbs 2,9 Kg 28.4 lbs 22,5 Kg 49.6 lbs 2,0 Kg 26.4 lbs 6 mm 250 cm 250 m 254x3xh 9 cm 3,3 Kg 5/ / /2 00 x5 /6 xh 3 / lbs 8 mm 250 cm 200 m 254x3xh 9 cm 3,9 Kg 5/6 8 2 / x5 /6 xh 3 / lbs 0 mm 250 cm 25 m 254x3xh 9 cm 0,8 Kg 3/ /2 40 /4 00 x5 /6 xh 3 / lbs R8

9 SINCE 974 INNOVATIONS FOR THE TILE SETTING PROFESSIONAL RAIZOR - CUTTING SYSTEM FOR LARGE FORMAT TILES RAIZOR: CUTTING GUIDESS...S2 EXTENSION FOR RAIZOR...S3 ACCESSORIES AND SPARE PARTS FOR RAIZOR...S3 FREE-CUT - CUTTING SYSTEM FOR LARGE FORMAT TILES FREE-CUT: CUTTING GUIDES...S4 CUTTING-OFF PLIERS FOR MATERIAL OF THICKNESS >6 mm...s4 VACUUM SUCTION KIT FOR FREE-CUT...S4 FREE-FLEX 90 : COMPLETE CUTTING UNIT WITH ANGLE GRINDER FOR FREE-CUT FOR 90 CUT...S5 FREE-FLEX 35 /55 : COMPLETE CUTTING UNIT WITH ANGLE GRINDER FOR FREE-CUT FOR 35 /55 CUT...S5 PROFILING DEVICE FOR CREATING /2 BULLNOSE...S5 MODULAR WORKING BENCH BM80 MkII : MODULAR WORKING BENCH...S6 ACCESSORIES FOR BM80 MkII MODULAR WORKING BENCH...S7 HANDLING SYSTEMS EASY-MOVE MkII WITH AND WITHOUT CROSSBARS (VACUUM SUCTION CUPS WITH VACUUM GAUGE)...S8 EASY-MOVE MkII WITH AND WITHOUT CROSSBARS (VACUUM SUCTION CUPS)...S9 EASY-MOVE MkII WITH AND WITHOUT CROSSBARS (DOUBLE SUCTION CUPS)...S MODULAR TROLLEY CAM ADV: MODULAR TROLLEY...S2 VIBRATOR FOR LARGE FORMAT TILES VOLPINO: COMPACT VIBRATOR...S3 OTHER TOOLS FOR BIG TILES/SLABS CLOSER: DEVICE TO ACCOST TILES/SLABS...S4 RUBBER ANTI-BOUNCING TILE BEATER...S4 DIAMOND PADS FOR EDGE ANGLE GRINDER...S4 DEVICE TO PERFORM CIRCULAR CUTS KOMPASS: DEVICE TO PERFORM CIRCULAR CUTS...S5 GLUING KIT (FOR STEPS AND COUNTERTOP) 90 GLUING KIT...S6 The widest range of equipment ideal for the most innovative ceramic tiles. With both RAIZOR and FREE-CUT rails, a perfect score & snap cut can be performed on slabs up to 447cm long. Furthermore, with the additional angle grinder support units to be used in combination with FREE-CUT, any type of cut can be performed. These angle grinder support units allow blade cuts such as miter cut at 45, straight cut at 90, as well as shape the edge to half bullnose. The EASY-MOVE MkIII frame is the ideal handling solution suitable for any slab surface: from glossy to textured. The modular CAM ADV cart is the perfect solution to transport any slab, extremely useful to back-butter slabs with thinset adhesive. The modular bench BM80 MkII has been designed to provide an efficient work surface still remaining very easy to be transported. To get our range ever wider, specific equipment to install slabs have been developed: the VOLPINO vibrator and our rubber tile beater are extremely useful to help any air pocket to escape from underneath the slab and prevent potential cracking, the CLOSER device to bring slab near to each other after being layed down on thinset mortar, the KOMPASS to perform circular score & snap cuts, a wide range of diamond pads to finish edges after cut has been performed.

10 RAIZOR CUTTING SYSTEM FOR LARGE FORMAT TILES NOVITÁ 433CRR THICK TILES PLIERS EXTENSION Cutting system for large format tiles up to 332 cm ft. (447 cm ft. with optional extension), lightweight (9 Kg lbs) and easy to transport. RAIZOR is composed by: two connectable guides with cutting length of 60 cm (5.2 ft.) each (332 cm ft. when combined); die-cast cutting unit provided with wolfram carbide wheel Ø 6 mm (5/8 ) and pin (pin rotates on bearings); cutting-off pliers for tiles/slabs with thickness from 3 to 6 mm (/8 - /4 ); everything packed in a padded bag with shoulder-straps and provided with inside modular compartments and pocket. The resistant padded bag protects the product and allow to carry it easily. It has adjustable compartments and inside pocket for placing personal belongings or work tools. Guides are made of sturdy aluminum extruded profiles, each one with 3 stain-free suction cups Ø 88 mm (3 /2 ) - 6 suction cups in total. The suction cups, extremely useful while measuring the size of the cut to be made, prevent the SPECIFICATIONS AND VERSIONS cutting guide to move during the scoring, ensuring the maximum precision. Also, they prevent the cutting guide to overturn, no matter how much pressure is applied during the scoring: this allows to effectively score even high thickness tiles. The suction cups handles perform a 80 movement in order not to interfere with the cutting unit. The cutting unit is made of die cast aluminum and runs onto the guide thanks to 3 polyoxymethylene (wearing-resistant material) wheels; each equipped with two internal bearings. It is provided with fine adjustment systems (factory-calibrated) allowing the perfect coupling of the cutting unit with the guide. This allows both to eliminates any kind of play and to perfectly align the wolframcarbide cutting-wheel to the guide resulting in maximum efficacy, precision and quality of cut. To cut tiles thicker than 6 mm (/4 ) use the pliers 69TM0AN (accessory). Made of sturdy galvanized steel they are provided with knob to apply progressive and precise pressure exactly on the scoring line. The accessory extension (art. 433CRP00) offering a cutting length of 03 cm (3.4 ft.) if used alone, allows the RAIZOR system to reach a maximum length of cut of 447 cm (4.7 ft.) or 275 cm (9 ft.) by using only one profile/guide plus the extension. length of cut bag size 433CR R RAIZOR - complete cutting system for cutting up to 332 cm (0.9 ft): two connectable guides with cutting length of 60 cm (5.2 ft.) each; die-cast cutting unit provided w/wolfram carbide wheel Ø 6 mm (5/8 ) and pin (pin rotates on bearings); cutting-off pliers for tiles/slabs with thickness from 3 to 6 mm (/8 - /4 ); padded bag with shoulder-straps and provided with inside modular compartments and pocket. 332 cm x25x h 6 cm - 7 x0 x h 6 3/8 9 Kg lbs 86x27x h8 cm - 73 x0 /2 x h 7 9,5 Kg - 2 lbs S2

11 ACCESSORIES AND SPARE PARTS FOR RAIZOR NOVITÁ 433CRP00 NOVITÁ 69TR0A 69TM0AN EXTENSION FOR RAIZOR AND CUTTING-OFF PLIER FOR THICK TILES Extruded aluminum extension for RAIZOR equipped with 2 stain-free-rubber suction cups Ø 88 mm Cutting-off pliers for tiles/slabs thicker than 6 mm - /4 (art.69tm0an). (3 /2 ) and connecting system. By combining the extension to both RAIZOR s guides or just one of Made of sturdy galvanized steel they are provided with knob to apply progressive and precise pressure exactly on the scoring line. Dual position rotating presser and breaker allows to use the plier at them, the system offers the maximum flexibility in terms of length of cut (maximum 447 cm ft.). The extension can also be used alone (length of cut: 03 cm ft.). It fits in its specific begin/end of cut or along the strip (longitudinal/parallel to the incision/scoring). Width-adjustable compartment in RAIZOR s bag. rubber feet to fit for different widths of cut maximizes the leverage effect when applying pressure. length of cut 433CRP cm (3.8 ft.) extension for RAIZOR with 2 stain-free suction cups 03 cm - 40 /2 2,5 Kg 5.5 lbs 27x8x h 2 cm 50 x7 x h 4 3/4 3,3 Kg 7.3 lbs 69TM0AN Cutting-off plier for tile with thickness 6-20 mm (/4-3/4 ) -,3 Kg 2.8 lbs 38x8xh 8 cm 3 x3 xh 4,5 Kg 3.3 lbs ACHIEVABLE CUTTING LENGTHS ACCORDING TO THE VARIOUS POSSIBLE COMBINATIONS OF RAIZOR + EXTENSION 447 cm (4.7 ft.) RAIZOR RAIZOR EXTENSION 275 cm (9 ft.) 332 cm (0.9 ft.) RAIZOR RAIZOR RAIZOR EXTENSION 60 cm (5.2 ft) RAIZOR 03 cm (3.4 ft.) SPARE PARTS FOR RAIZOR RAIZOR EXTENSION 69TR0A Cutting-off pliers for tile/slab with max thickness of 6 mm (/4 ) 330 gr.6 oz 35D6A Wheel Ø 6 mm (5/8 ) with pin 0 gr 0.35 oz S3

12 FREE-CUT - CUTTING SYSTEM FOR LARGE FORMAT TILES 69GP 69FC50PN 69TR0A OPTIONAL 69FC50N PROFILING DEVICE 90 CUTTING UNIT 35 /55 CUTTING UNIT THICK TILES PLIERS VACUUM SUCTION CUP 69TM0AN FREE-CUT: CUTTING SYSTEM FOR LARGE FORMAT TILES UP TO 426 cm (4 ) LENGTH Free-Cut is a system made up of main guides and extensions. Both available in several lengths. Combine them to reach the required cutting length. Both main guides and extension are made with sturdy aluminum extruded profiles and are equipped with stain-free-rubber suction cups Ø 20 mm (4 3/4 ) for best fixing to the slab. Main guides come with a case containing: die-cast cutting unit with steel wheel-holder pin, cuttingoff pliers for tiles/slabs with maximum thickness of 6 mm (/4 ), side squares (which also has the function to protect the wolfram carbide wheel). Cutting unit is made of die-cast aluminum and runs onto the guide thanks to 3 polypropylene pulleys, each equipped with two internal bearings. Furthermore, the cutting unit is provided with fine adjustment devices (factory-calibrated) for perfect alignment of the wolfram carbide wheel with the guide and to avoid any sort of play. This confers maximum efficacy, precision and quality of cut. To cut tiles thicker than 6/7 mm - /4 (max 20 mm - 3/4 ) use the pliers 69TM0AN (accessory). Made of sturdy galvanized steel they are provided with knob to apply progressive and precise pressure exactly on the scoring line. Free-Cut accept the following accessories: vacuum (pump) suction cups kits for use on textured material (ref. 69GP); cutting unit with angle grinders Free-Flex 90 and Free-Flex 35 /55 ; edge profiler for half bullnose. Main guide: 69FC50N (length of cut 56 cm - 5. ); 69FC200N (length of cut 206 cm ). Extensions: 69FC50PN (length 70 cm ); 69FC200PN (length 220 cm ); 69FC00PN (length 00 cm ). SPECIFICATIONS AND VERSIONS FREE-CUT 69FC50N FC200N Without With extension With extension With extension extension 00 cm 70 cm 220 cm Free-Cut guide with complete outfit 56 cm 256 cm 326 cm 376 cm Kg 80x Ø7 cm + 39x39xh 4 cm 3 Kg (max cut length 56 cm-5.2 ) lbs 7 x Ø /8 x5 3/8 xh 5 / lbs Free-Cut guide with complete outfit 206 cm 306 cm 379 cm 426 cm 5 Kg 227x Ø7 cm + 39x39xh 4 cm 8 Kg (max cut length 206 cm-6.8 ) lbs 89 x Ø /8 x5 3/8 xh 5 / lbs FREE-CUT EXTENSIONS Lenght 69FC00PN Free-Cut extension; Lenght 00 cm (3.3 ) 00 cm Kg lbs 5x Ø 7cm 46 x Ø 7 0 Kg 22 lbs 69FC50PN Free-Cut extension; Lenght 70 cm (5.6 ) 70 cm Kg 7.6 lbs 80x Ø 7cm 7 x Ø 7 0 Kg 22 lbs 69FC200PN Free-Cut extension; Lenght 220 cm (7.2 ) 220 cm Kg 26.4 lbs 227x Ø 7cm 89 x Ø 7 5 Kg 33 lbs OTHER ACCESSORIES AND SPARE PARTS FOR FREE-CUT 69TM0AN Cutting-off pliers for tile/slab with thickness 6 (/4 ) up to 20 mm (3/4 ) 33x7xh 8 cm 3 x7 h 3 2 Kg 4.4 lbs 69TR0A Cutting-off pliers for tile/slab with max thickness of 6 mm (/4 ) D6A Wheel Ø 6 mm (5/8 ) with pin GP Pair of vacuum suction cups kits for FREE-CUT 33x33xh 0 cm 3 x3 xh 4 4, Kg 9 lbs S4

13 FREE-FLEX AND PROFILING DEVICE (FOR FREE-CUT) 79CCT25 79CCT25 69GTE 69GTE OH 69GTJ 69GTJ OH 79FLEX 69GSAG 69GSAG OH FREE-FLEX CUTTING UNIT WITH ANGLE GRINDER FOR FREE-CUT To be mounted on cutting guides FREE-CUT for performing 90 cuts. Tilting movement (plunge cut) to adjust the depth of cut and to make cuts in multiple passes as well as to perform cut in the middle of the slab, square and rectangular holes. Depth of cut: 5 mm (3/8 ) with disc Ø 25 mm (5 ). Equipped with semi-universal attachment: compatible with the most popular brands and models of angle grinders. Ø 50 mm (6 ) disc can also be mounted: depth of cut: 25 mm ( ). Provided with clutch hose for dust extraction. Dry cut with diamond blade. Available both with or without angle grinder (version with angle grinder includes Ø 25 mm - 5 turbo dry use diamond disc). FREE-FLEX 35 /55-35 /55 VARIABLE ANGLE CUTTING UNIT WITH ANGLE GRINDER FOR FREE-CUT To be mounted on cutting guides FREE-CUT. angle grinders. Provided with tiling system to miter angle from 35 to 55 on large format tiles. Provided with clutch hose for dust extraction. Depth of cut: 5 mm (5/8 ) with disc Ø 25 mm (5 ). Dry cut with diamond blade. Ø 50 mm (6 ) disc can also be mounted: depth of cut: 20 mm (3/4 ). Available both with or without angle grinder (version with angle grinder includes Ø 25 mm - 5 Equipped with semi-universal attachment: compatible with the most popular brands and models of turbo diamond disc dry use). PROFILING DEVICE DEVICE WITH ANGLE GRINDER FOR CREATING /2 BULLNOSE To be mounted on cutting guides FREE-CUT for performing half bullnose profile on large format tiles Equipped with semi-universal attachment: compatible with the most popular brands and models of up to 0 mm (3/32 ) radius. angle grinders. Two dry use diamond wheels available: radius 6 mm-/4 (min) and 0 mm-3/32 (max). Both Suggested speed of the wheels: 4000 rpm; approximate angle grinder power: 400W. Ø 20 mm (4 3/4 ). Diamond wheel not included. The profiling device can works up to 25 mm ( ) thickness tiles. In this case it will bullnose just Dry use diamond wheels only. the upper part of edge of the tile. Available both with or without angle grinder. Provided with clutch hose for dust extraction. SPECIFICATIONS AND VERSIONS FREE-FLEX 90 Plunge-cut unit 90 with angle grinder 900W 230V 50/60 Hz and continuous rim diamond disc 69GTE 230V V 50/60 Hz Ø 25 mm (5 ). Semi-universal attachment. FREE-FLEX 90 Plunge-cut unit 90 with angle grinder 780W 0V 60 Hz and continuous rim diamond disc Ø 40x28x h25 cm 69GTE 0V mm (5 ). Semi-universal attachment. 0V 60 Hz 6 x x h0 FREE-FLEX 90 Plunge-cut unit 90 with angle grinder 780W 0V 50 Hz and continuous rim diamond disc Ø 69GTE 0GB V 50 Hz 25 mm (5 ). Semi-universal attachment. Plunge-cutting unit 90 without angle grinder. Without disc. Semi-universal attachment: 40x28x h25 cm 69GTE OH compatible with the most popular brands and models of angle grinders. 6 x x h0 FREE-FLEX 35 /55 Variable angle 35 /55 cutting unit with angle grinder 900W 230V 50/60 Hz and turbo 69GTJ 230V V 50/60 Hz diamond disc Ø 25 mm (5 ). Semi-universal attachment. 40x28x h25 cm FREE-FLEX 35 /55 Variable angle 35 /55 cutting unit with angle grinder 780W 0V 60 Hz and turbo 69GTJ 0V V 60 Hz 6 x x h0 diamond disc Ø 25 mm (5 ). Semi-universal attachment. FREE-FLEX 35 /55 Variable angle 35 /55 cutting unit with angle grinder 780W 0V 50 Hz and turbo 69GTJ 0GB V 50 Hz diamond disc Ø 25 mm (5 ). Semi-universal attachment. 35 /55 variable angle cutting unit without angle grinder. Without disc. Semi-universal attachment: 40x28x h25 cm 69GTJ OH compatible with the most popular brands and models of angle grinders. 6 x x h0 79CCT Continuous rim diamond disc Ø 25 mm (5 ) for Free-Flex (inner hole 22,2 mm) dry use GSAG 230V Profiling device with angle grinder 400W 230V 50/60 H. Without wheel. Semi-universal attachment. 230V 50/60 Hz - 69GSAG OH Profiling device without angle grinder. Without wheel. Semi-universal attachment: compatible with the most popular brands and models of angle grinders x28x h25 cm 6 x x h0 40x28x h25 cm 6 x x h0 79FLEX006SE Shaping wheel for /2 bullnose, radius 6 mm (/4 ), Ø 20mm (4 3/4 ) dry use FLEX00SE Shaping wheel for /2 bullnose, radius 0 mm (3/32 ), Ø 20mm (4 3/4 ) dry use ,5 Kg 2 lbs 3,2 Kg 7 lbs 5,8 Kg 2.8 lbs 3,5 Kg 7.7 lbs 7, Kg 5.6 lbs 4,2 Kg 9.3 lbs S5

14 BM80 MkII - MODULAR WORKING BENCH BM80 MkII with folding legs/transport position. 2 BM80 MkII combined BM80 MkII is the ideal working bench for cutting and processing large format slabs. Worktop dimensions: 80 x 90 cm (3 x6 ), up to 240x50 cm (7.8 x5 ) with optional extensions. For instance, by combining one BM80 MkII and a pair of extensions art. 394CP240A it is possible to have a worktop dimension of 240x90 cm (7.8 x 2.9 ), ideal for slabs of dimension 240x20 cm (7.8 x3.9 ). Combining together two BM80 MkII tables the resulting worktop dimension is 360x90 cm (.8 x2.9 ), which can be extended up 420x50 cm (3.7 x4.9 ) with optional extensions. Ideal for any tile 300x00 cm (9.8 x3.2 ) or bigger. Height: 83 cm (32 3/4 ). Maximum load: 50 Kg (33 lbs.). Two types of extension are available as accessories: SPECIFICATIONS AND VERSIONS art.394est0a: side telescopic extension to widen the bench up to 60 cm /8 (worktop total width 50 cm ); art. 394CP240A: pair of side telescopic extensions to lengthen the bench up to 30 cm (2 ) each side (60 cm - 24 in total) Other accessories available: art. 394CR R: pair of wheels for easily move the bench when is in working position (legs not folded); art. 394CA 0A: kit of 4 lateral steel hooks for hang up the cutting guides; art. 394CB 0A: steel-made side tools box; art. 394GA R: kit of 4 supports for in-legs shelf (wooden shelf not provided); art. 394BLOPIACP: standalone tile holder for BM80 MkII - pair; art. 394PM02ACP: strips support for BM80 MkII (length: 2 cm - 4 3/4 ) - pair. 394MA RAI BM80 MkII modular working bench with folding legs 29 Kg 63.9 lbs 90x2x h 0 cm + 7x20x h 20 cm 75 x 8 /4 x 3 / x8 xh 8 30,9 Kg 68. lbs ACHIEVABLE WORKTOP DIMENSIONS COMBINING BM80 MkII + EXTENSIONS (OPTIONAL) bench/benches Pair of extension for side 90cm-35 /2 (394CP240A) Extension side 80cm-70 (art. 394EST 0A) Worktop dimensions BM80 MkII = 80x90 cm 70 x35 /2 BM80 MkII + Yes ( pcs art. 394CP240A) + - = 240x90 cm 94 /2 x35 /2 BM80 MkII + Yes ( pcs art. 394CP240A) + Yes ( pcs art 394EST 0A) = 240x50 cm 94 /2 x59 BM80 MkII Yes ( pcs art 394EST 0A) = 80x50 cm 70 x59 2 BM80 MkII = 360x90 cm 40 x35 /2 2 BM80 MkII Yes (2 pcs art 394EST 0A) = 360x50 cm 40 x59 2 BM80 MkII + Yes ( pcs art. 394CP240A) + Yes (2 pcs art 394EST 0A) = 420x50 cm 65 x59 2 BM80 MkII + Yes ( pcs art. 394CP240A) + - = 420x90 cm 65 x35 /2 S6

15 ACCESSORIES FOR BM80 MkII MODULAR WORKING BENCH 394BLOPIACP 394PM02ACP 394EST 0A 394CP240A 394CR R 394CA 0A 394CB 0A 394GA R SPECIFICATIONS AND VERSIONS 394EST 0A Side telescopic extension to widen the bench up to 60 cm /8 (worktop total width 50 cm ) 394CP240A Pair of side telescopic extensions to lengthen the bench up to 30 cm (2 ) each side (60 cm - 24 tot) 6,2 Kg 3.7 lbs 40x4xh 8 cm 55 /8 x 5 /2 xh 3 394BLOPIACP standalone tile holder for BM80 - pair 0,9 Kg 2 lbs 27x5xh 0 cm 0 5/8 x4 xh 6 Kg 2.2 lbs 394PM02ACP Strips support for BM80 (length: 2 cm - 4 3/4 ) - pair 0,6 Kg.3 lbs 27x5xh 0 cm 0 5/8 x4 xh 6 0,7 Kg.5 lbs 394CR R Pair of wheels for legs,7 Kg 3.7 lbs 27x5xh 0 cm 0 5/8 x4 xh 6,8 Kg 4 lbs 394GA R Kit of 4 supports for in-legs shelf (wooden shelf not provided) 394CA 0A Kit of 4 lateral steel hooks for hang up the cutting guides 0,5 Kg. lbs 33x7xh 8 cm 394CB 0A Steel-made side tools box 4,9 Kg 0.8 lbs 58x28xh 23 cm 23 xx h 9 art. 394BLOPIACP art. 394CA0A art. 394CRR S7 3 x 6 5/8 xh 3 with pcs art. 394CP240A and pcs art. 394EST0A worktop dimension: 240x50 cm (94 /2 x59 ) with art. 394GA R (wooden shelf not provided) art. 394BLOPIACP art. 394CB0A 46 x Ø 8 Kg 2.2 lbs 27x5xh 0 cm 0 5/8 x4 xh 6 with 2 pcs art. 394EST0A worktop dimension: 360x50 cm (40 x59 ) with art. 394CP240A worktop dimension: 240x90 cm (94 /2 x35 /2 ) 8,2 Kg 8. lbs 90x Ø7 cm art. 394GA R art. 394PM02ACP 0,2 Kg 22.5 lbs 7,2 Kg 5.9 lbs,2 Kg 2.6 lbs 2 Kg 4.4 lbs 5,4 Kg.9 lbs

16 EASY-MOVE MkIII + EASY-MOVE MkIII WITH CROSSBARS (VACUUM SUCTION CUPS WITH VACUUM GAUGE) 432EM03CA ACCESSORIES FOR EASY-MOVE MkIII WITH CROSSBARS ACCESSORIES FOR EASY-MOVE MkIII 432EM03TA DOUBLE GRIP HANDLE DOUBLE GRIP HANDLE CROSSBARS EASY-MOVE MkIII WITH VACUUM SUCTION CUPS WITH VACUUM GAUGE: ADJUSTABLE EXTENSION DEVICE FOR HANDLING LARGE FORMAT TILES UP TO 320 cm (0.5 ) LENGTH Lightweight and easy to transport devices that give the maximum versatility thanks to the adjustable extension so to adapt to tiles sizes to handle them. Maximum tile/slab length: 320 cm (0.5 ), minimum 00 cm (3.3 ); in order to handle slabs with a shorter length, it is suggested to separate the two profiles and use just one of them. Made up of two pairs of aluminum profiles connected each other so that they can slide one over the other, it is available both with crossbars (8 suction cups in total) and without crossbars (6 suction cups in total). The suction cups units can slide along the aluminum profiles in few moments thanks to the quick lockrelease handles system. Suction cups units are free to tilt/pivot (+/-.25 ) so to adapt to the tile and therefore to provide the maximum grip in every situation. This is particularly useful for textured tiles. Equipped with vacuum (pump) suction cups Ø 50 mm (6 ) with vacuum gauge, perfect for textured tiles. Built with special stain-free rubber (grey color), which does not leave stains on the tiles. SPECIFICATIONS AND VERSIONS The vacuum (pump) system allows to restore or increase vacuum while suction cup is still attached to the tile. The vacuum gauge precisely indicates when it is needed to restore the vacuum. Sliding/telescopic handles (with quick lock-release handle system) to make the use of the product the most ergonomic as possible and to optimize the installation on wall. Equipped with anti-slip and stain-free rubber point. Crossbars are equipped with quick lock-release system and with safety hooks for extra security. Pair of crossbars and suction cup units for crossbars are available as accessories. Available as accessory a kit of 4 double grip handles to maximize ergonomics when the device is used by four operators. 432EM03CA EM03TA EASY-MOVE MkIII with 6 vacuum (pump) suction cups with vacuum 22,6 Kg 49.8 lbs 93x46xh 5 cm 76 x8 xh 6 28,2 Kg 62. lbs gauge (stain-free-rubber) EASY-MOVE MkIII with crossbars with 8 vacuum (pump) suction cups 93x46xh 5 cm+40x4xh 8 cm 76 x8 xh x5 /2 xh 3 32,5 Kg 7.7 lbs 39,6 Kg 87.3 lbs with vacuum gauge (stain-free-rubber) +40x40xh 5 cm /6 +5 3/4 x5 3/4 xh 6 S8

17 EASY-MOVE MkIII AND EASY-MOVE MkIII WITH CROSSBARS (VACUUM SUCTION CUPS) 432EM03CV 432EM03TV ACCESSORIES FOR EASY-MOVE MkIII WITH CROSSBARS ACCESSORIES FOR EASY-MOVE MkIII DOUBLE GRIP HANDLE DOUBLE GRIP HANDLE CROSSBARS EASY-MOVE MkII WITH VACUUM SUCTION CUPS: ADJUSTABLE EXTENSION DEVICE FOR HANDLING LARGE FORMAT TILES UP TO 320 cm (0.5 ) LENGTH Lightweight and easy to transport devices that give the maximum versatility thanks to the adjustable extension so to adapt to tiles sizes to handle them. Maximum tile/slab length: 320 cm (0.5 ), minimum 00 cm (3.3 ); in order to handle slabs with a shorter length, it is suggested to separate the two profiles and use just one of them. Made up of two pairs of aluminum profiles connected each other so that they can slide one over the other, it is available both with crossbars (8 suction cups in total) and without crossbars (6 suction cups in total). The suction cups units can slide along the aluminum profiles in few moments thanks to the quick lockrelease handles system. Suction cups units are free to tilt/pivot (+/-.25 ) so to adapt to the tile and therefore to provide the maximum grip in every situation. This is particularly useful for textured tiles. Equipped with vacuum (pump) suction cups Ø 50 mm (6 ), perfect for textured tiles. Built with special stain-free rubber (grey color), which does not leave stains on the tiles. The vacuum (pump) system allows to restore or increase vacuum while suction cup is still attached to the tile. Sliding/telescopic handles (with quick lock-release handle system) to make the use of the product the most ergonomic as possible and to optimize the installation on wall. Equipped with anti-slip and stain-free rubber point. Crossbars are equipped with quick lock-release system and with safety hooks for extra security. Pair of crossbars and suction cup units for crossbars are available as accessories. Available as accessory a kit of 4 double grip handles to maximize ergonomics when the device is used by four operators. SPECIFICATIONS AND VERSIONS 432EM03CV EM03TV EASY-MOVE MkIII with 6 vacuum (pump) suction cups (stain-freerubber) EASY-MOVE MkIII with crossbars with 8 vacuum (pump) suction cups (stain-free-rubber) 22,6 Kg 49.8 lbs 93x46xh 5 cm 76 x8 xh 6 28,2 Kg 62. lbs 32,5 Kg 7.7 lbs 93x46xh 5 cm+40x4xh 8 cm +40x40xh 5 cm 76 x8 xh x5 /2 xh 3 /6 +5 3/4 x5 3/4 xh 6 39,6 Kg 87.3 lbs S9

18 EASY-MOVE MkIII AND EASY-MOVE MkIII WITH CROSSBARS (DOUBLE SUCTION CUPS) 432EM03CB ACCESSORIES FOR EASY-MOVE MkIII WITH CROSSBARS ACCESSORIES FOR EASY-MOVE MkIII 432EM03TB DOUBLE GRIP HANDLES VACUUM SUCTION CUP DOUBLE GRIP HANDLES CROSSBARS VACUUM SUCTION CUP EASY-MOVE MkII WITH DOUBLE SUCTION CUPS: ADJUSTABLE EXTENSION DEVICE FOR HANDLING LARGE FORMAT TILES UP TO 320 cm (0.5 ) LENGTH Lightweight and easy to transport devices that give the maximum versatility thanks to the adjustable Rubber cups Ø 20 mm (4 3/4 ) built with special stain-free rubber (grey color), which does not leave extension so to adapt to tiles sizes to handle them. stains on the tiles. Maximum tile/slab length: 320 cm (0.5 ), minimum 00 cm (3.3 ); in order to handle slabs with a Sliding/telescopic handles (with quick lock-release handle system) to make the use of the product shorter length, it is suggested to separate the two profiles and use just one of them. the most ergonomic as possible and to optimize the installation on wall. Equipped with anti-slip and Made up of two pairs of aluminum profiles connected each other so that they can slide one over the stain-free rubber point. other, it is available both with crossbars (8 double suction cups / 6 rubber cups in total) and without Crossbars are equipped with quick lock/release system and with safety hooks for extra security. crossbars (6 double suction cups/2 rubber cups in total). Double suction cups can be replaced with vacuum suction cups (optional). The suction cups units can slide along the aluminum profiles in few moments thanks to the quick Pair of crossbars and suction cup units for crossbars are available as accessories. lock-release handles system. Available as accessory a kit of 4 double grip handles to maximize ergonomics when the device is used Suction cups units are free to tilt/pivot (+/-.25 ) so to adapt to the tile and therefore to provide the by four operators. maximum grip in every situation. SPECIFICATIONS AND VERSIONS 432EM03CB EM03TB EASY-MOVE MkIII with 6 stain-free-rubber double suction cups (2 2,5 Kg 47.4 lbs 93x46xh 5 cm 76 x8 xh 6 27, Kg 59.7 lbs rubber cups in total) EASY-MOVE MkIII with crossbars with 8 stain-free-rubber double suction cups (6 rubber cups in total) +33x33xh 0 cm 55 x5 /2 xh 3 /6 +3 x3 xh 93x46xh 5 cm+40x4xh 8 cm 76 x8 xh ,8 Kg 67.9 lbs 37,9 Kg 83.5 lbs S0

19 ACCESSORIES FOR EASY-MOVE 432EO03ID 432EO03TR 432EO03VB TI-MACCHIA AN MkIII 432EO03VV TI-MACCHIA AN TI-MACCHIA AN TI-MACCHIA AN 432EO03VA TI-MACCHIA AN TI-MACCHIA AN TI-MACCHIA AN TI-MACCHIA AN TI-MACCHIA AN TI-MACCHIA AN 85V50CPVT 85V50CP ACCESSORIES FOR EASY-MOVE MKIII 432EO03ID Kit of 4 double grip handles for EASY-MOVE MkIII 4, Kg 9 lbs 40x40xh 5 cm 5 3/4 x5 3/4 xh 6 4,5 Kg 9.9 lbs 432EO03TR Pair of crossbars for EASY-MOVE MkIII 6,7 Kg 4.8 lbs 40x4xh 8 cm 55 x5 /2 xh 3 /6 7,7 Kg 7 lbs 432EO03VB Kit of 2 DOUBLE SUCTION CUPS for EASY-MOVE MkIII crossbars 2,6 Kg 5.7 lbs 33x33xh 0 cm 3 x3 xh 4 432EO03VV Kit of 2 VACUUM (pump) SUCTION CUPS for EASY-MOVE MkIII crossbars 3,2 Kg 7. lbs 40x40xh 5 cm 5 3/4 x5 3/4 xh 6 3,6 Kg 7.9 lbs 432EO03VA Kit of 2 VACUUM (pump) SUCTION CUPS WITH GAUGE for EASY-MOVE MkIII crossbars 3,2 Kg 7. lbs 40x40xh 5 cm 5 3/4 x5 3/4 xh 6 3,6 Kg 7.9 lbs 85V50CP VACUUM (pump) SUCTION CUP with protection Kg 2.2 lbs 33x33xh 0 cm 3 x3 xh 4,4 Kg 3. lbs 85V50CPVT VACUUM (pump) SUCTION CUP WITH GAUGE with protection Kg 2.2 lbs 33x33xh 0 cm 3 x3 xh 4,4 Kg 3. lbs + = = = = S 3 Kg 6.6 lbs

20 CAM ADV - CART FOR TRASPORT AND STORAGE OF LARGE FORMAT TILES 69CML UN CAM ADV - CART FOR TRASPORT AND STORAGE OF LARGE FORMAT TILES AND HANDLING DEVICES AND FOR SPREADING ADHESIVE ON THE BACK OF THE TILE ( BACK-BUTTERING ) Cart designed for transport and handling of large format tiles (for instance 3200x600x h 6 mm One side of the cart can be used as storage for the transport of one or more slabs x5.25 x h 5/32 ). On the storage side there are 2 height-adjustable rubber supports, to prevent any accidental It allows to easily and safely spread adhesive in the back of the tile ( back-buttering ). For this damage to the slabs as well as a telescopic safety hooks (which can be adapted to the dimension purpose it comes with two height-adjustable hooks for holding our frames EASY-MOVE MkIII with of the slab) to prevent slabs to fall. crossbars (and previous models) with the slab fasten on them. Wooden plans with rubber edges on both sides of the cart provide safe support for large format When the handling devices / frames (such as EASY-MOVE MkII ) are on the CAM ADV, the suction tiles. cups remain fully accessible. This allow to restore the vacuum (if needed) easily. This feature is Two of the four pivoting wheels are provided with brakes so to prevent the cart to accidentally particularly relevant when installing textured large format tiles.. move. CAM ADV is light thanks to its design and the aluminum components. Maximum load: 250 Kg (55 lbs). SPECIFICATIONS AND VERSIONS 69CML UN CAM ADV Cart for large format tiles and handling devices and for application of the adhesive in the back of the tile ( back-buttering ) 30 Kg 66. lbs 40x43x h 30 cm 55 /8 x7 xh 2 34 Kg 60.6 lbs S2

21 VOLPINO IN ACCORDANCE WITH CE LAW USE AND MAINTENANCE HANDBOOK WARRANTY YEAR 32 TECHNICAL CHARACTERISTICS AREA VIBRANTE 4x2 cm Designed to vibrate surface of large format tiles and help any air pocket escaping from underneath High vibration frequency (motor Rpm: 3000 at 50 Hz; 3600 at 60 Hz). the slab, ensuring a full bound to the adhesive. Vibration level can be adjusted via mechanical removal of eccentrics. Compact design, lightweight (6,7 Kg lbs) and easy to handle, it comes with 3 ergonomic Single speed. handles which allow a comfortable and secure grip during both usages on floors and walls. Stain-free-rubber plate designed to prevent stain and damage to the slab. Replaceable rectangular The constant and uniformly applied vibration does not damage the slab even in the most risky plate but with triangular point to easily reach the corners. situations (for instance, when large holes and/or cuts have been previously performed on the slab). Motor power: 25 Watt. SPECIFICATIONS AND VERSIONS FORNITO CON AREA VIBRANTE 32 UE TRASFORMATORE V 50/60 Hz 3000/ 3600 VARIABLE 4x2 cm SPEED US V 60 Hz Single-phase 25 W x8 /4 32 GB V 50 Hz SPEED SELECTOR DIMENSION AND WEIGHT VOLPINO 6,7 Kg 4.8 lbs 58x30xh 25cm 23 x2 xh 0 7,2 Kg 5.9 lbs ACCESSORIES 32LA03A Stain-free rubber plate (spare part),4 Kg 3. lbs 4x2 cm 6 x8 /4 2,3 Kg 5. lbs AREA VIBRANTE S3

22 OTHER 85DAL0A 227D D200 42G 274CV00G80 274FD00G FD00G FD00G FD00G FD00G FD00G FD00G0050 ACCESSORIES FOR CLOSER 274FD00A FOAM WASHER CLOSER - DEVICE TO ACCOST TILES/SLABS WITH STAIN-FREE-RUBBER SUCTION CUPS To accost big tiles/slabs. 85DAL0A Closer device to accost tiles/slabs with stain-free-rubber suction cup 4 Kg 8.8 lbs 58x20xh 25 cm 9 5/8 x8 x0 8,2 Kg 8 lbs RUBBER ANTI-BOUNCING TILE BEATER To improve adhesive bounding and to expel air from underneath the slabs/tiles. Rubber bottom to prevent tiles/slabs damages. Sturdy galvanized steel structure. The off-set handle increases effectiveness. 42G Rubber tile beater 45x350 mm 5 3/4 x3 3/4,5 Kg 3.3 lbs 40x40xh 5 cm 5 3/4 x2 5/8 xh 4 3/4 9,4 Kg 20.7 lbs DIAMOND PADS To finish the edges of tiles / slabs after cutting. Available grains 60 and D Diamond pad 55x90 mm grain 60 GRANA D Diamond pad 55x90 mm grain DIAMOND PADS FOR EDGE AND SIDE FINISHING / POLISHING Use on angle grinder RPM: min.800 / MAX x90 mm 2 /8 x3 /2 0 gr 0.35 oz 55 gr.9 oz 274FDAG Kit of 6 diamond pads for agglomerates Ø 00 GRANA DIAMANTE - 274FDGP Kit of 6 diamond pads for porcelain Ø FDGR Kit of 6 diamond pads for granite Ø FDMA Kit of 6 diamond pads for marble Ø FD00G Diamond pad grain 50 - Ø 00 gr FD00G Diamond pad grain 00 - Ø 00 gr FD00G Diamond pad grain Ø 00 gr FD00G Diamond pad grain Ø 00 gr FD00G Diamond pad grain Ø 00 gr FD00G Diamond pad grain Ø 00 gr FD00G Diamond pad grain Ø 00 gr CV00G Zirconium abrasive disc with Velcro attachment grain 80 - Ø 5 gr FD00A Pad with velcro Ø 00 mm - 4MA attachtment - Ø 00 - DIAMANTE Material 80 gr 2.8 oz 80 gr 2.8 oz 90 gr 3.2 oz 80 gr 2.8 oz 50 gr.8 oz 50 gr.8 oz 50 gr.8 oz 50 gr.8 oz 50 gr.8 oz 50 gr.8 oz 50 gr.8 oz 50 gr.8 oz 60 gr 2. oz S4

23 KOMPASS - DEVICE TO PERFORM CIRCULAR CUTS KOMPASS scribing 433KOMP 50 slicing via angle grinder KOMPASS - DEVICE TO PERFORM CIRCULAT CUTS Device to perform large diameter circular cuts on large format tiles using the score and snap system. It is possible to perform centered, and off centered holes, in relation to the position of the suction cup which holds the KOMPASS to the slab. Centered holds dimension: min. Ø 22 cm (8 5/8 ), max. Ø 00 cm (39 3/8 ). Off-centered hole dimension: min. Ø 32 cm (2 5/8 ), max. Ø 00 cm (39 3/8 ). Centered holes Ø dimension Diamond scoring wheel Ø 6 mm with pin and bearings. Metric/imperial ruler with pointer showing hole diameter. Light and easy to transport. To complete the processing of the hole is almost always necessary to perform slicing with an angle grinder and removing the cloves afterward. It is possible to perform a full circular hole, a semicircular hole, and ¼ of circle, rounding the corner of the slab. Off-centered holes Ø dimension 433KOMP KOMPASS - device to perform circular cuts 22 cm - 00 cm 8 5/8-39 3/8 32 cm - 00 cm 2 5/8-39 3/8,2 Kg 2.6 lbs 5x5xh 69 cm 6 x6 xh 27 0,2 Kg 22.5 lbs OFF-CENTERED HOLES half circle /4 circle (corner) = Cup (of the suction cups) CENTERED HOLES = Cup (of the suction cups) full circular hole fillet on corner S5

24 90 GLUING KIT (FOR STEPS AND COUNTERTOP) 394KIT90BM * * The product does not include BM80 MkII modular bench 90 GLUING KIT (FOR STEPS AND COUNTERTOP) Miter joining fixture designed to be quickly installed on bench BM80 MkII (as well as on previous version) to bond steps, countertops and swimming pool copings. The product includes clamps and a pivot mechanism to joint tiles at 90 after miter cut has been performed on them. The product includes a pair of aluminum spacers to easily set the proper clearance between the tile pieces to be bonded together. The product has been designed to perform up to 2 joints on the same tile and so achieving a U shaped seps or counter top. Max achievable steps/counter top dimensions: overall length: 50cm; overall height: 20cm; overall depth: Bench BM80 MkII is not included. Each Bench BM80 MkII can be equipped with up to 2 Miter joining fixture (90 gluing kits). Tiles are hold in place with removable clamps, easy to be positioned and adjusted. The product includes positioning squares for the tile pieces. Allows an easy positioning of the tile pieces, is quick to be operated, very sturdy. Can be adjusted at any time to keep its accuracy. 394KIT90BM gluing kit to create steps counter top 25 Kg 55. lbs 23x46xh 5 cm 84 x8 xh 6 30 Kg 66. lbs S6

25 SINCE 974 INNOVATIONS FOR THE TILE SETTING PROFESSIONAL MANUAL TILE CUTTERS TILE CUTTERS BI-DIRECTIONAL TILE CUTTERS... T PUSH TILE CUTTERS... T2 Professional, lightweight, accurate. Three adjectives to describe our line of manual tile cutters. Available with either bi-directional and push cut. For cutting tiles tiles from 52 to 25 cm in length.

26 BI-DIRECTIONAL TILE CUTTERS WARRANTY YEAR 254RAI75 254RAI63 254RAI52 Professional, light, accurate, strong. Pivoting fence for cuts from 0 to 75 with pre-marked stops at the popular angles of: Ergonomic grip for bi-directional cut (pulling or pushing). 5/30/45 degrees. No adjustment required for different tile thicknesses. A sliding stop that flips up out of the way to make additional cuts without losing your Scratch-resistant pads on the breaking feet wont mar delicate glazes. previous measurements (useful for carpet pattern layouts). Cast aluminum board makes this cutter light, while the steel rail and roller provide superior strength The spring loaded table and foam extension pads provide aternate breaking methods and the with low maintenance (no seals). proper amount of impact absorbtion to reduce broken tile (especially on the harder porcelains). The cutting wheel is mounted with a pin that can be easily tapped out for quick and effortless On board storage compartment for up to (2) replacement cutting wheels. wheel replacement (one size fits all). SPECIFICATIONS AND VERSIONS 254RAI cm 29 /2 53x53 cm 20 7/8 x20 7/8 9,4 Kg 20.7 lbs 06x40xh 25 cm Kg 24.2 lbs 254RAI cm 24 3/6 44x44 cm 7 5/6 x7 5/6 8,4 Kg 8.5 lbs 4 3/4 x5 3/4 xh 0 0 Kg 22 lbs 254RAI cm 20 /2 36x36 cm 4 3/6 x4 3/6 7 Kg 5.4 lbs 85x35xh 24 cm 33 /2 x3 3/4 xh 0 8 Kg 7.6 lbs MANUAL TILE CUTTERS CUTTING WHEELS Ø 4 mm wolfram carbide wheel with spindle 354TITA Ø 4 mm TITANIUM wheel with spindle 7 gr 0.2 oz 24x7xh cm 0 x6 3/4 xh 3/8 00 gr 3.5 oz T2

27 PUSH TILE CUTTERS WARRANTY YEAR 254RAI25S 254RAI93S 254RAI75S 254RAI63S 254RAI52S Professional, light, accurate, strong. Automatic breaking pad drops down when the handle is raised and flips up when scoring. The pad design gives superior leverage when breaking the thicker porcelains. Adjustment available for thicker tile up to 25 mm ( ) thick. Scratch-resistant breaking foot wont mar delicate glazes. Cast aluminum board makes this cutter light, while the steel rail and roller provide superior strength with low maintenance (no seals). The cutting wheel is mounted with a pin that can be easily tapped out for quick and effortless SPECIFICATIONS AND VERSIONS wheel replacement (one size fits all). Pivoting fence for cuts from 0 to 75 with pre-marked stops at the popular angles of: 5/30/45 degrees. A sliding stop that flips up out of the way to make additional cuts without losing your previous measurements (useful for carpet pattern layouts). The spring loaded table and foam extension pads provide aternate breaking methods and the proper amount of impact absorbtion to reduce broken tile (especially on the harder porcelains). On board storage compartment for up to (2) replacement cutting wheels. Small cuts from the edge of the tile are easy, even for the novice. 254RAI25S cm 49 /4 88x88 cm 34 2/3 x 34 2/3 20 Kg 44. lbs 66x44x h 26 cm 65 2/5 x7 5/6 xh 0 2 Kg 46,3 lbs 254RAI93S cm 36 /3 66x66 cm 26 x26 0,5 Kg 23. lbs 24x40xh 23 cm 49 x5 3/4 xh 9 23, Kg 50.9 lbs 254RAI75S cm 29 /2 53x53 cm 20 7/8 x20 7/8 9,4 Kg 20.7 lbs 06x40xh 25 cm 4 3/4 x5 3/4 xh 0 Kg 24.2 lbs 254RAI63S cm 24 3/6 44x44 cm 7 5/6 x7 5/6 8,4 Kg 8.5 lbs 06x40xh 25 cm 4 3/4 x5 3/4 xh 0 0 Kg 22 lbs 254RAI52S cm 20 /2 36x36 cm 4 3/6 x4 3/6 7,5 Kg 6.5 lbs 85x35xh 24 cm 33 /2 x3 3/4 xh 9 /2 8,5 Kg 8.7 lbs CUTTING WHEELS Ø 4 mm wolfram carbide wheel with spindle 354TITA Ø 4 mm TITANIUM wheel with spindle 7 gr 0.2 oz 24x7xh cm 0 x6 3/4 xh 3/8 00 gr 3.5 oz MANUAL TILE CUTTERS T3