MONTAGE COMMERCIAL MONTAGE INDUSTRIAL MONTAGE II MONTAGE PLUS WELDED COMMERCIAL ORNAMENTAL FENCE

Transcription

1 COMMERCIAL INDUSTRIAL II WELDED COMMERCIAL ORNAMENTAL FENCE TYPICAL PANEL DRAWING (Classic Style shown; Genesis, Majestic and Warrior also available) * Nominal Double Ring Adornament option 1-/16 W x 1-1/ H x 1-15/16 L x Ga. Rail Post size 2-1/ x 16 Ga. Standard Heights 3, 3½,, 4½,, ( Ga.) 3-15/16 Typical (4 Air Gap) 3 Typical (3 Air Gap) * Refer to Construction Specification Table for recommended (Post Spacing by Bracket Type) E-COAT PROTECTION UNIQUE PROFUSION WELDING PROCESS PATENT D466,620 6,8,5,01,43 ATF RAKABLE DESIGN PATENT D466,6,01,43 AUTOMATICALLY FUSION WELDED AT ALL INTERSECTIONS NO EXPOSED WELDS - VIRTUALLY SEAMLESS APPEARANCE GOOD NEIGHBOR PROFILE - SAME ON BOTH SIDES CONSISTENT HIGH QUALITY LEVEL - EVERY PANEL ZINC-PHOSPHATIZED GALVANIZED STEEL BASE MATERIAL Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.38

2 II INDUSTRIAL COMMERCIAL PANELS 2-Rail (Standard) (4 Air Gap) FAX: CLASSIC GENESIS MAJESTIC WARRIOR (NOMINAL) PALLET PANEL HEIGHT ITEM NUMBER PANEL WEIGHT QUANTITY STOCKING STYLE/COLOR 1R * X 4 42 MAJ/BLK H 1R * X 0 48 MAJ/BLK H 1R * X 6 52 MAJ/BLK H 1R * X CLS/BLK H 1R * X 20 0 MAJ, CLS, GEN/BLK STYLE SELECTION = MAJESTIC = CLASSIC = GENESIS = WARRIOR = * M C G W X = COLOR SELECTION ( Nominal) Actual Panel Width 3/4 Sq x Ga. Picket = (1 - Pickets per Panel) (3 Air Gap) CLASSIC GENESIS MAJESTIC (NOMINAL) PALLET PANEL HEIGHT ITEM NUMBER PANEL WEIGHT QUANTITY STOCKING STYLE/COLOR 1R * X H 1R * X H 1R * X H 1R * X H 1R * X STYLE SELECTION = MAJESTIC = CLASSIC = GENESIS = WARRIOR = * M C G X = COLOR SELECTION IN 3 AIR GAP * For Non-Stock Panels refer to Sales Policy. * Genesis panels in both Black and Bronze are packaged with (Black) 3/4 Sq picket plugs. ( Nominal) Actual Panel Width 3/4 Sq x Ga. Picket = ( - Pickets per Panel) Effective: 04/16/ PAGE 2.3 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

3 COMMERCIAL INDUSTRIAL II PANELS 2-Rail (Flush Bottom) (4 Air Gap) FAX: CLASSIC GENESIS MAJESTIC WARRIOR (NOMINAL) PALLET PANEL HEIGHT ITEM NUMBER PANEL WEIGHT QUANTITY STOCKING STYLE/COLOR 1R * X 4F 42 MAJ/BLK H 1R * X 0F 48 MAJ/BLK H 1R * X 6F 52 MAJ/BLK H 1R * X 258F 61 CLS/BLK H 1R * X 20F 0 MAJ/BLK STYLE SELECTION = MAJESTIC = CLASSIC = GENESIS = WARRIOR = * M C G W X = COLOR SELECTION ( Nominal) Actual Panel Width 3/4 Sq x Ga. Picket = (1 - Pickets per Panel) (3 Air Gap) CLASSIC GENESIS MAJESTIC (NOMINAL) PALLET PANEL HEIGHT ITEM NUMBER PANEL WEIGHT QUANTITY STOCKING STYLE/COLOR 1R * X 4F-3 4 H 1R * X 0F-3 55 H 1R * X 6F-3 61 H 1R * X 258F-3 2 H 1R * X 20F-3 83 STYLE SELECTION = MAJESTIC = CLASSIC = GENESIS = WARRIOR = * M C G X = COLOR SELECTION IN 3 AIR GAP * For Non-Stock Panels refer to Sales Policy. * Genesis panels in both Black and Bronze are packaged with (Black) 3/4 Sq picket plugs. ( Nominal) Actual Panel Width 3/4 Sq x Ga. Picket = ( - Pickets per Panel) Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.40

4 II INDUSTRIAL COMMERCIAL PANELS 3-Rail (Standard) (4 Air Gap) FAX: CLASSIC GENESIS MAJESTIC WARRIOR (NOMINAL) PALLET PANEL HEIGHT ITEM NUMBER PANEL WEIGHT QUANTITY STOCKING STYLE/COLOR 1R * X 3 50 H 1R * X 0 56 H 1R * X 6 60 H 1R * X 8 6 H 1R * X 30 8 MAJESTIC = M CLASSIC = C WARRIOR = MAJ, GEN/BLK MAJ/BLK MAJ, CLS, GEN/BLK & MAJ/BRZ MAJ, CLS, GEN/BLK MAJ, CLS, GEN/BLK & MAJ/BRZ ( Nominal) Actual Panel Width 3/4 Sq x Ga. Picket = (1 - Pickets per Panel) (3 Air Gap) CLASSIC GENESIS MAJESTIC (NOMINAL) PALLET PANEL HEIGHT ITEM NUMBER PANEL WEIGHT QUANTITY STOCKING STYLE/COLOR 1R * X H 1R * X H 1R * X H 1R * X CLS/BLK H 1R * X STYLE SELECTION = MAJESTIC = CLASSIC = GENESIS = WARRIOR = * X = COLOR SELECTION M C G IN 3 AIR GAP ( Nominal) Actual Panel Width 3/4 Sq x Ga. Picket = ( - Pickets per Panel) * For Non-Stock Panels refer to Sales Policy. * Genesis panels in both Black and Bronze are packaged with (Black) 3/4 Sq picket plugs. Effective: 04/16/ PAGE 2.41 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

5 COMMERCIAL INDUSTRIAL II PANELS 3-Rail (Flush Bottom) (4 Air Gap) CLASSIC GENESIS MAJESTIC WARRIOR FAX: (NOMINAL) PALLET PANEL HEIGHT ITEM NUMBER PANEL WEIGHT QUANTITY STOCKING STYLE/COLOR 1R * X 3F 50 H 1R * X 0F 56 MAJ/BLK H 1R * X 6F 60 MAJ/BLK 4-1/2 H 1R M X 4F 65 BLK (Available in Majestic Only) H 1R * X 8F 6 H 1R * X 30F 8 MAJ/BLK STYLE SELECTION = MAJESTIC = CLASSIC = GENESIS = WARRIOR = * M C G W X = COLOR SELECTION ( Nominal) Actual Panel Width 3/4 Sq x Ga. Picket = (1 - Pickets per Panel) (3 Air Gap) CLASSIC GENESIS MAJESTIC (NOMINAL) PALLET PANEL HEIGHT ITEM NUMBER PANEL WEIGHT QUANTITY STOCKING STYLE/COLOR 1R * X 3F-3 56 MAJ/BLK H 1R * X 0F-3 63 H 1R * X 6F-3 6 MAJ/BLK 4-1/2 H 1R M X 4F-3 5 (Available in Majestic Only) H 1R * X 8F-3 80 H 1R * X 30F-3 1 MAJ/BLK STYLE SELECTION = MAJESTIC = CLASSIC = GENESIS = WARRIOR = * M C G X = COLOR SELECTION IN 3 AIR GAP * For Non-Stock Panels refer to Sales Policy. * Genesis panels in both Black and Bronze are packaged with (Black) 3/4 Sq picket plugs. ( Nominal) Actual Panel Width 3/4 Sq x Ga. Picket = ( - Pickets per Panel) Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.42

6 II INDUSTRIAL COMMERCIAL Height Rail Length Post Size 2-½ Square x 16 Ga. 2-½ Square x 16 Ga. 2-½ Square x 16 Ga. Montage Plus Wind Load Capacity Pickets With 3.25 Air Space Wind Load Capacity Factor (PSF) Typical Wind Load Capacity (MPH) WIND LOADING Pickets With 2.0 Air Space Wind Load Capacity Factor (PSF) Typical Wind Load Capacity (MPH) Note: Mph calculated using ANSI/ASCE -02, American Society of Civil Engineers Minimum Design Loads for Buildings and Other Structures, Exposure Category B (Urban and suburban areas, wooded areas, or other terrain with numerous closely spaced obstructions having the size of single family dwellings or larger). For wind loading applicable to a particular specification, consult the applicable Building Code FAX: Note: Mph values shown are provided for information only. They are calculated according to ANSI/ASCE -05, American Society for Civil Engineers Minimum Design Loads for Buildings and Other Structures, Exposure Category C (open terrain with scattered obstructions having lengths, generally less than feet), based on post setting in 36 deep concrete footer in soil assumed to be of mid-range strength and compaction. Since specified project conditions such as jurisdictional building codes, elevation of installation, post base/footer design, soil strength, etc., may change from project to project, a structural engineering evaluation, unique to applicable requirements and conditions, should be performed. Consult with your Ameristar Service Representative for an estimate on Engineering Analysis and P.E. Certification. Effective: 04/16/ PAGE 2.43 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

7 COMMERCIAL INDUSTRIAL II ITEM DESCRIPTION BLACK BLACK DEALER PART NO. PRICE BRACKETS COLOR BRONZE PART NO. DEALER PRICE SIZE BAG QTY FAX: BOX QTY WT. EA. Montage Plus Universal Boulevard Bracket (Not for Invincible) Montage Plus Line Bracket (Not for Invincible) Montage Plus Swivel Bracket (Not for Invincible) BB2 BB1 BN2 BN1 (N/S) 2-1/ Made from high strength steel. Works universally for lines, ends, and corners. Packaged 2 per bag with # x 3/4 self-drilling screws, 1/4 x 1-3/4 one-way bolts and 1/4 tee nuts. LINE CORNER MUST BE ORDERED IN BAG QUANTITIES. END BB6 BN6 (N/S) BB1 BN1 2-1/ Used as a boulevard bracket around a post to join two adjacent panels in line. Packaged 2 per bag with # x 3/4 self-drilling screws, 1/4 x 1-3/4 one-way bolts and 1/4 tee nuts. MUST BE ORDERED IN BAG QUANTITIES. BB1 BN1 (N/S) For oblique angles. Packaged 2 per bag with #10 x 3/4 self-drilling screws and #10 x 5/8 flat head phillips screws. MUST BE ORDERED IN BAG QUANTITIES Montage Plus Flat Mount Bracket (Not for Invincible) BB1 BN Can be used to attach panels to walls, wood posts, etc. Packaged 2 per bag with # x 3/4 self-drilling screws, 1/4 x 1-3/4 one-way bolts, 1/4 tee nuts and 1/4 drive rivets. MUST BE ORDERED IN BAG QUANTITIES. ADORNAMENTS ITEM DESCRIPTION BLACK BLACK DEALER PART NO. PRICE BRONZE PART NO. COLOR DEALER PRICE SIZE WEIGHT EACH Quad-Flare Top View Narrow Side Wide Side AB5 AN5 3/4.15 Fits atop 3/4 square pickets (press-fit). Heavy-duty cast aluminum. The four-sided flare design supports the popular traditional look when added to Genesis style panels. (1 required per panel on standard (4 ) picket spacing; required per panel on condensed (3 ) picket spacing). Triad AB520R AN520R 3/4.15 Fits atop 3/4 square pickets (press-fit). Heavy-duty cast aluminum. Three distinct tips reflect the strong look of a barbed spear when added to Genesis style panels. (1 required per panel on standard (4 ) picket spacing; required per panel on condensed (3 ) picket spacing). Royalty AB525 AN525 (N/S) 3/4. Fits atop 3/4 square pickets (press-fit). Die cast aluminum. (1 required per panel on standard (4 ) picket spacing; required per panel on condensed (3 ) picket spacing). Double Ring AB2 AN2 (N/S) Fits onto the face of 3/4 square pickets. Die cast aluminum. Can be mounted in a line between the top rails of 3-rail panels to give the look of an ornamental circle. ( required per panel, not available for 3 Air Gap panels). Butterfly Scroll (Aluminum) HB506 HN506 (N/S) 4 x 3-1/. Fastens onto face of 3/4 square pickets. Self drilling tek screws included. N/S = Non Stock Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.44

8 AMERISTAR RIS AMERISTAR AMERISTAR ZINC PRIMER RIS MER RISTAR AMERISTAR ZINC PRIMER RISTAR PRIMER II INDUSTRIAL COMMERCIAL ITEM DESCRIPTION One-Way Bolts BLACK BLACK PART NO. DEALER PRICE FASTENERS 3HB0P-20 3HN0P 1/4 x 1-3/4 20/Bag.8 Steel washered one-way bolt for commercial brackets. COLOR BRONZE PART NO. DEALER PRICE FAX: SIZE BOX QTY WT. EA. Tee Nuts Self-Drilling Screws 15BP-20 15NP 1/4 20/Bag.3 Steel tee nuts for commercial brackets. HB5P-50 HN5P # x 3/4 50/Bag.6 HB53P-50 HN53P #10 x 3/4 50/Bag. Steel hex head self-drilling screws for commercial brackets. Flat Head Phillips Screws Drive Rivets H51P #10 x 5/ Steel flat head screw for setting angle on Montage Plus swivel brackets. HB558P HN558P 1/ Drive rivets for flat mount brackets. CUSTOM FINISHES ITEM DESCRIPTION BLACK BLACK DEALER PART NO. PRICE COLOR BRONZE PART NO. DEALER PRICE WT. EA. Paint Pen PB100 PN100.5 AMERISTAR PB100 BLACK Custom finishes in the two standard Montage Plus Fence colors. Zinc-Rich Paint Pen Spray Paint AMERISTAR PZ100 ZINC PZ Priming required for cut steel edges prior to application of Ameristar Custom Finishes. NOTE: All cut rail ends must be seal coated with Zinc Rich Primer and Ameristar s custom touch-up paint or the warranty is void.. FB100 FN Custom finishes in the two standard Montage Plus Fence colors. Zinc-Rich Primer FZ Ideal for priming cut steel edges of Montage Plus Fence components prior to applying the appropriate custom finish color. NOTE: All cut rail ends must be seal coated with Zinc Rich Primer and Ameristar s custom touch-up paint or the warranty is void. Effective: 04/16/ PAGE 2.45 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

9 COMMERCIAL INDUSTRIAL II STEEL ORNAMENTAL SQUARE POST FAX: NOTE: In location subject to freezing, where posts are grouted into core-drilled holes, a 1/4 diameter hole should be drilled in the post approximately 1/ above elevation to allow for drainage of built-up ground water. The drilled hole must be wiped clean and dry before applying Ameristar zinc primer and color finish. X = COLOR SELECTION W = WHITE S = SAND Post Ga. / Wall Post Catalog Price Catalog Price Post Diameter Thickness Length Item Number (Black) (Color) Weight WP X / SQ. (STEEL) 16 GA. (RES/COM) WP X WP X 2506 WP X WP X GA. (COMMERCIAL) WP X WP X WP X P X SQ. (STEEL) GA. (INDUSTRIAL) P X 02 P X 084 P X 06 P X P X 0 43 P X SQ. (STEEL) GA. (INDUSTRIAL) P X P X 4006 P X P X P X SQ. (STEEL) 3/16 WALL (INDUSTRIAL) P X 6006 P X P X SQ. (STEEL) 1/4 WALL (INDUSTRIAL) P X P X Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.46

10 II INDUSTRIAL COMMERCIAL Note: Plated posts used with Majestic & Conqueror styles may require a post length 1 longer than the panel/gate height dependent on the grade elevation. STEEL PLATED ORNAMENTAL SQUARE POST X = COLOR SELECTION W = WHITE S = SAND FAX: GA. / Post Catalog Price Catalog Price Post Post Diameter Plate Size Length Item Number (Black) (Color) Weight 2-1/ SQ. (STEEL) GA. 5 x 5 SQ. 1/4 Thick with /16 Holes (8833G) P X 25048P P X 25060P P X 2502P SQ. (STEEL) GA. 6 x 6 SQ. 1/4 Thick with /16 Holes (5003G) P X 048P P X 060P P X 02P 20 4 SQ. (STEEL) GA. 8 x 8 SQ. 3/8 Thick with /16 Holes (886G) P X 40048P P X 40060P P X 4002P POST CAPS X = COLOR SELECTION W = WHITE S = SAND Catalog Price Catalog Price Cap Cap Type Cap Style Size Item Number (Black) (Color) Weight 1-3/4 SQ. A X STEEL SQ. A X / SQ. A X STANDARD FLAT CAP 3 SQ. 4 SQ. A X 508 A X SQ. A X SQ. A X ALUMINUM SQ. 2-1/ SQ. H X 508R A X BALL CAP 3 SQ. A X SQ. A X SQ. A X 5 8 Effective: 04/16/ PAGE 2.4 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

11 COMMERCIAL INDUSTRIAL II AMERISTAR FENCE PRODUCTS Montage Plus - Steel Ornamental Fence System Fusion Welded and Rackable CONSTRUCTION SPECIFICATION - SECTION 32 1 PART 1 - GENERAL 1.01 WORK INCLUDED The contractor shall provide all labor, materials and appurtenances necessary for installation of the welded ornamental steel fence system defined herein at (specify project site) RELATED WORK Section - Earthwork Section - Concrete 1.03 SYSTEM DESCRIPTION The manufacturer shall supply a total fence system of (specify Montage Plus standard picket space or Montage Plus Pool, Pet & Play 3 air space) Welded and Rackable (ATF All Terrain Flexibility) Ornamental Steel (for standard picket space, specify Classic, Majestic, Genesis, or Warrior ; for 3 air space, specify Classic, Majestic, or Genesis ) design. The system shall include all components (i.e., panels, posts, gates and hardware) required QUALITY ASSURANCE The contractor shall provide laborers and supervisors who are thoroughly familiar with the type of construction involved and materials and techniques specified REFERENCES ASTM A653/A653M - Standard Specification for Steel Sheet, Zinc-Coated (Galvanized) or Zinc-Iron Alloy Coated (Galvannealed) by the Hot-Dip Process. ASTM B1 - Practice for Operating Salt-Spray (Fog) Apparatus. ASTM D5 - Test Method for Specular Gloss ASTM D - Test Method for Evaluating Degree of Blistering in Paint. ASTM D8 - Practice for Conducting Tests on Paint and Related Coatings and Materials using Filtered Open-Flame Carbon-Arc Light and Water Exposure Apparatus. ASTM D Test Method for Evaluation of Painted or Coated Specimens Subjected to Corrosive Environments. ASTM D44 - Test Method for Calculation of Color Differences from Instrumentally Measured Color Coordinates. ASTM D - Test Method for Resistance of Organic Coatings to the Effects of Rapid Deformation (Impact). ASTM D3 - Test Method for Measuring Adhesion by Tape Test. ASTM F08 Ornamental Fences Employing Galvanized Steel Tubular Pickets SUBMITTAL The manufacturer s literature shall be submitted prior to installation. 1.0 PRODUCT HANDLING AND STORAGE Upon receipt at the job site, all materials shall be checked to ensure that no damage occurred during shipping or handling. Materials shall be stored in such a manner to ensure proper ventilation and drainage, and to protect against damage, weather, vandalism and theft PRODUCT WARRANTY A. All structural fence components (i.e. rails, pickets, and posts) shall be warranted within specified limitations, by the manufacturer for a period of 20 years from date of original purchase. Warranty shall cover any defects in material finish, including cracking, peeling, chipping, blistering or corroding. B. Reimbursement for labor necessary to restore or replace components that have been found to be defective under the terms of manufactures warranty shall be guaranteed for five (5) years from date of original purchase. PART 2 - MATERIALS 2.01 MANUFACTURER The fence system shall conform to (specify Montage Plus standard picket space or Montage Plus Pool, Pet & Play 3 air space) Welded and Rackable (ATF All Terrain Flexibility) Ornamental Steel, (for standard picket space, specify Classic, Majestic, Genesis or Warrior; for 3 air space, specify Classic, Majestic, or Genesis) design, (specify extended picket or flush) bottom rail treatment, (specify 2-Rail, 3-Rail or 3-Rail with Double Rings) style manufactured by Ameristar Fence Products, Inc., in Tulsa, Oklahoma MATERIAL A. Steel material for fence panels and posts shall conform to the requirements of ASTM A653/A653M, with a minimum yield strength of 45,000 psi (0 MPa) and a minimum zinc (hot-dip galvanized) coating weight of 0.60 oz/ft2 (4 g/m2), Coating Designation G-60. B. Material for pickets shall be 3/4 square x Ga. tubing. The rails shall be steel channel, 1.5 x 1.4 x Ga. Picket holes in the rail shall be spaced (specify 4.65 o.c. for standard picket space or o.c. for 3 air space). Fence posts and gate posts shall meet the minimum size requirements of Table FABRICATION A. Pickets, rails and posts shall be pre-cut to specified lengths. Rails shall be pre-punched to accept pickets. B. Pickets shall be inserted into the pre-punched holes in the rails and shall be aligned to standard spacing using a specially calibrated alignment fixture. The aligned pickets and rails shall be joined at each picket-to-rail intersection by Ameristar s proprietary fusion welding process, thus completing the rigid panel assembly (Note: The process produces a virtually seamless, spatter-free good-neighbor appearance, equally attractive from either side of the panel). C. The manufactured panels and posts shall be subjected to an inline electrode position coating (E-Coat) process consisting of a multi-stage pretreatment/wash (with zinc phosphate), followed by a duplex application of an epoxy primer and an acrylic topcoat. The minimum cumulative coating thickness of epoxy and acrylic shall be 2 mils (0.058 mm). The color shall be (specify Black or Bronze). The coated panels and posts shall be capable of meeting the performance requirements for each quality characteristic shown in Table 2 (Note: The requirements in Table 2 meet or exceed the coating performance criteria of ASTM F08). D. The manufactured fence system shall be capable of meeting the vertical load, horizontal load, and infill performance requirements for Industrial weight fences under ASTM F08. E. Gates shall be fabricated using fusion welded ornamental panel material and 1-3/4 sq. x ga. gate ends. All rail and upright intersections shall be joined by welding. All picket and rail intersections shall also be joined by welding. PART 3 - EXECUTION 3.01 PREPARATION All new installation shall be laid out by the contractor in accordance with the construction plans INSTALLATION Fence post shall be spaced according to Table 3, plus or minus ¼. For installations that must be raked to follow sloping grades, the post spacing dimension must be measured along the grade. Fence panels shall be attached to posts with brackets supplied by the manufacturer. Posts shall be set in concrete footers having a minimum depth of 36 (Note: In some cases, local restrictions of freezing weather conditions may require a greater depth). The Earthwork and Concrete sections of this specification shall govern material requirements for the concrete footer. Posts setting by other methods such as plated posts or grouted core-drilled footers are permissible only if shown by engineering analysis to be sufficient in strength for the intended application FENCE INSTALLATION MAINTENANCE When cutting/drilling rails or posts adhere to the following steps to seal the exposed steel surfaces; 1) Remove all metal shavings from cut area. 2) Apply zinc-rich primer to thoroughly cover cut edge and/or drilled hole; let dry. 3) Apply 2 coats of custom finish paint matching fence color. Failure to seal exposed surfaces per steps 1-3 above will negate warranty. Ameristar spray cans or paint pens shall be used to prime and finish exposed surfaces; it is recommended that paint pens be used to prevent overspray. Use of non- Ameristar parts or components will negate the manufactures warranty GATE INSTALLATION Gate posts shall be spaced according to the manufacturers gate drawings, dependent on standard out-to-out gate leaf dimensions and gate hardware selected. Type and quantity of gate hinges shall be based on the application; weight, height, and number of gate cycles. The manufacturers gate drawings shall identify the necessary gate hardware required for the application. Gate hardware shall be provided by the manufacture of the gate and shall be installed per manufacturer s recommendations CLEANING The contractor shall clean the jobsite of excess materials; post-hole excavations shall be scattered uniformly away from posts. Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.48

12 II INDUSTRIAL COMMERCIAL AMERISTAR FENCE PRODUCTS Montage Plus - Steel Ornamental Fence System Fusion Welded and Rackable CONSTRUCTION SPECIFICATION - SECTION 32 1 Table 1 Minimum Sizes for Montage Plus Posts Fence Posts Panel Height 2-1/ x 16 Ga. Up to & Including Height Gate Leaf Gate Height Up to & Including Over Up to & Including Up to 2-1/ x Ga. 3 x Ga. 1 to 3 x Ga. 3 x Ga. 1 to 3 x Ga. 4 x Ga. Table 2 Coating Performance Requirements Quality Characteristics ASTM Test Method Performance Requirements Adhesion D3 Method B Adhesion (Retention of Coating) over 0% of test area (Tape and knife test). Corrosion Resistance B1, D & D1654 Corrosion Resistance over 1,500 hours (Scribed per D1654; failure mode is accumulation of 1/8 coating loss from scribe or medium #8 blisters). Impact Resistance D Impact Resistance over 60 inch lb. (Forward impact using ball). Weathering Resistance D8 D44, D5 (60 Method) Weathering Resistance over 1,000 hours (Failure mode is 60% loss of gloss or color variance of more than 3 delta-e color units). Table 3 Montage Plus Post Spacing By Bracket Type Span For CLASSIC, GENESIS, MAJESTIC, & WARRIOR Nominal (1.5 Rail) Post Size 2-1/ 2-1/ 2-1/ 3 2-1/ 3 Bracket Type Montage Plus Universal (BB2) Montage Plus Line Blvd. (BB1) Montage Plus Flat Mount (BB1) Montage Plus Swivel (BB1)* Post Settings ± 1/4 O.C / *5 *5-1/ *Note: When using BB1 swivel brackets on either or both ends of a panel installation, care must be taken to ensure the spacing between post and adjoining pickets meets applicable codes. This will require trimming one or both ends of the panel. Effective: 04/16/ PAGE 2.4 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

13 COMMERCIAL INDUSTRIAL II / WARRANTY WELDED ORNAMENTAL FENCE Ameristar s Montage Plus welded ornamental fences are manufactured from the highest quality materials by skilled craftsmen to meet the highest standards of workmanship in the industry. Galvanized steel framework is subjected to a multi-stage pretreatment/wash (with zinc phosphate), followed by a duplex cathodic electro-coat system consisting of an epoxy primer, which significantly increases corrosion protection, and an acrylic liquid topcoat, which provides the protection necessary to withstand adverse weathering effects. The electro-coated surface on all Montage Plus welded ornamental panels and posts, are guaranteed under normal and intended usage, against cracking, peeling, chipping, blistering or corroding commencing with the original purchase date and extending according to the applications defined in the table below. Normal and intended usage does not include physical damage, abrasion, or heavy salt spray exposure to the protective coating. The following acts and/or omissions will void the subject warranty: Damage to the product caused by the property owner by use of landscape, gardening equipment, chemicals that may cause damage, and/or water sprinklers with high mineral content; Damage caused by adhesion of chicken wire, chain link mesh, welded wire, or other similar substance to the product; Damage caused by allowing plant life of any sort to grow directly upon or in contact with any portion of the product or sap from trees; Any alteration to the product itself by the property owner including any on-site cutting or welding; and/or, failure to follow any and all maintenance instructions provided by Ameristar at the time of sale to the original purchaser even if these instructions are not forwarded to the ultimate claimant under this warranty. When cutting Montage Plus immediately seal the exposed surfaces by 1) Removing all metal shavings from the cut area 2) Applying zinc-rich primer to thoroughly cover cut edge and drilled hole and, after letting dry 3) Applying two (2) coats of custom finish spray paint matching fence color. Failure to seal exposed surfaces per steps 1-3 above will negate warranty. If contractor uses non-ameristar parts/components this will negate the warranty. Ameristar Montage Plus welded ornamental fences are also guaranteed for the same period of time against defects in workmanship or materials. Should any Montage Plus welded ornamental panel or post manufactured by Ameristar fail in accordance with any of the above conditions, Ameristar warrants to the original purchaser their redemption through replacement, renewal or issuance of a pro-rated credit. The choice of redemption method is solely at the discretion of Ameristar. If the pro-rated alternative is chosen, the amount will be based on the original cost of materials at the date of purchase multiplied by the appropriate time and exposure factor from the table below: Application Fence Installations 0 to 1 Mile from Salt Water Coast Line Fence Installations 1 Mile to 10 Miles from Salt Water Coast Line Fence Installations Over 10 Miles from Salt Water Coast Line Length of Warranty 5 Years 10 Years 20 Years Note: Regardless of location and years in service, evidence of historical salt spray exposure shall be considered as grounds to void any warranty obligations. Notice of failure under the conditions of this warranty shall be sent to Ameristar or its authorized representative, in writing, together with proof of purchase and shall specify the nature of the defect and when it was first observed as well as photographs of current site conditions. Should the fence be improperly installed, Ameristar shall not be responsible for guaranteed performance or appearance of the material. Neither does this guarantee apply when failure or damage is due to improper use or application, abuse or misuse, salt spray exposure (see Table and Note above), vandalism, or acts of God. Ameristar reserves the right to inspect the material to determine validity of the claim. Upon acceptance of the claim by Ameristar or its authorized representative, redemption by replacement, renewal or issuance of a prorated credit shall be made by Ameristar. Reimbursement for labor necessary to restore and/or replace components that have been found defective under the terms of this warranty is guaranteed to the original purchaser for a period of five (5) years from the original purchase date. Ameristar reserves the right to select the qualified company or individual to perform the labor to repair or replace the components that are deemed to be defective under the terms of this warranty. The above constitutes the complete warranty by the manufacturer. No other agreement, written or implied, is valid. Ameristar Fence Products does not authorize any other person or agent to make any other express warranties. Ameristar neither assumes nor authorizes any other person or agent to assume any other liability in connection with the Montage Plus welded ornamental fence system N. MINGO RD., TULSA, OK 46 Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.50

14 II INDUSTRIAL COMMERCIAL STANDARD STEEL WELDED GATES SINGLE GATE SPECIFICATIONS DOUBLE FAX: Construction Components for Nominal Gate Openings of thru : Gate Ends: 1-3/4 Sq. ( Ga.) Steel Rails: 1-/16 W x 1-1/ H ( Ga.) Steel Pickets: 3/4 Sq. ( Ga.) Construction Components for Nominal Gate Openings of thru 1: Gate Ends: 1-3/4 Sq. ( Ga.) Steel Rails: 1-1/ W x 1-1/ H ( Ga.) Steel Pickets: 3/4 Sq. ( Ga.) (With gusset plates and cable kit) GATE DRAWING DIMENSIONAL FORMAT 3-3/4 3-3/4 s d Order 1 Leaf For Single Swing Opening Order 2 Leaves For Double Swing Opening W = Outside To Outside Width of Finished Gate Leaf H = Height; = Hinge Clearance; = Latch Clearance; = Gate Post Spacing (Inside-To-Inside) for Single Gate; P d = Gate Post Spacing (Inside-To-Inside) for Double Gate See Montage Plus Specification for Montage Plus Gate Post Recommendation HARDWARE KITS & POST INTERSPACES FOR SINGLE SWING STANDARD STEEL WELDED GATES NOMINAL GATE OPENING W = LEAF WIDTH FORK LATCH/BOX HINGE KITS #SGBSX25 OR #SGBSX3 AMERISTAR LOCK/BOX HINGE KIT #SGBSXA LOKKLATCH WITH TRU-CLOSE HINGE KIT #TCSGK TOP PULL LATCH WITH TRU-CLOSE HINGE KIT #TCPGK COMMERCIAL HINGE WITH STRONGARM KIT #CGBS-25, #CGBS-3 OR #CGBS-4 HEAVY COMMERCIAL HINGE KIT #HGBS-25, #HGBS-3 OR #HGB / / 62-3/4 0-3/4-1/ 5/8 42-5/8 52-1/8 61-3/8 0-5/8 8-3/8 8-1/8 3/4 3/4 41-1/ /4 6-1/ 88-1/4 (Gate Post Spacing (Inside-To-Inside) for Single Gate = (Hinge Clearance) + W (Out-To-Out Gate Width) + (Latch Clearance) Effective: 04/16/ 3/4 3/4 41-1/ /4 6-1/ 88-1/ / 62-3/4 0-3/4-1/ 1-1/ /4 53-3/ /4 1-3/4 HARDWARE KITS & POST INTERSPACES FOR DOUBLE SWING STANDARD STEEL WELDED GATES NOMINAL GATE OPENING W = LEAF WIDTH FORK LATCH / BOX HINGE KIT #SGBDX COMMERCIAL HINGE WITH STRONG ARM KIT #CGBD HEAVY COMMERCIAL HINGE KIT #HGBD / -1/ P d (Gate Post Spacing (Inside-To-Inside) for Double Gate = 2 x (Hinge Clearance) + 2 x W (Out-To-Out Gate Width) + (Latch Clearance) 1 5-1/ / 1-1/ / 103-1/ 1 0-1/ / 1 1-1/4 PAGE 2.51 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

15 COMMERCIAL INDUSTRIAL II SWING GATES 2-Rail (Standard) (4 Air Gap) FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH H H / 1-3/4 3-1/ /4-3/4 5-1/ 1-3/4 3-1/ /4-3/4 5-1/ 1-3/4 3-1/ /4-3/4 X 4-42 X 4-48 X 4-60 X 4-2 X 4-84 X 4-6 X X 4-0 X 4-2 X 4-4 X X X 4-0 X 4- X 0-42 X 0-48 X 0-60 X 0-2 X 0-84 X 0-6 X X 0-0 X 0-2 X 0-4 X X X 0-0 X 0- X 6-42 X 6-48 X 6-60 X 6-2 X 6-84 X 6-6 X X 6-0 X 6-2 X 6-4 X X X 6-0 X 6- MAJESTIC = M CLASSIC = C WARRIOR = W For additional strength; all gate leaves greater than 6 feet in width will have an intermediate center upright, gusset plates will be welded in all four corners, and the appropriate quantity of turnbuckle and cable kits will be included. Custom gate dimensions are available upon request, but incur a 10% engineering charge based on the nearest larger standard gate leaf. Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.52

16 II INDUSTRIAL COMMERCIAL SWING GATES 2-Rail (Standard) (4 Air Gap) CLASSIC GENESIS MAJESTIC WARRIOR FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH X X X X X / X X H 1-3/4 X / X X X X /4 X /4 X X X X X X / X X H 1-3/4 X / X X X X /4 X /4 X MAJESTIC = M CLASSIC = C WARRIOR = W For additional strength; all gate leaves greater than 6 feet in width will have an intermediate center upright, gusset plates will be welded in all four corners, and the appropriate quantity of turnbuckle and cable kits will be included. Custom gate dimensions are available upon request, but incur a 10% engineering charge based on the nearest larger standard gate leaf. Effective: 04/16/ PAGE 2.53 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

17 COMMERCIAL INDUSTRIAL II SWING GATES 2-Rail (Standard) (3 Air Gap) CLASSIC GENESIS MAJESTIC FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH 1R * X R * X R * X R * X R * X / 1R * X R * X R * X H 1R * X R * X R * X / 1R * X R * X R * X H 1R * X R * X R * X / 1R * X R * X R * X H 1R * X R * X R * X / 1R * X R * X R * X H 1R * X R * X R * X / 1R * X MAJESTIC = M CLASSIC = C WARRIOR = IN 3 AIR GAP For additional strength; all gate leaves greater than 6 feet in width will have an intermediate center upright, gusset plates will be welded in all four corners, and the appropriate quantity of turnbuckle and cable kits will be included. Custom gate dimensions are available upon request, but incur a 10% engineering charge based on the nearest larger standard gate leaf. Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.54

18 II INDUSTRIAL COMMERCIAL SWING GATES 2-Rail (Flush Bottom) CLASSIC GENESIS MAJESTIC WARRIOR (4 Air Gap) FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH X 4F-42 2 X 4F X 4F X 4F-2 41 X 4F / X 4F X 4F /4 X 4F / X 4F X 4F-4 2 X 4F X 4F /4 X 4F /4 X 4F X 0F-42 X 0F X 0F X 0F-2 46 X 0F / X 0F X 0F H 1-3/4 X 0F / X 0F X 0F X 0F X 0F /4 X 0F /4 X 0F- 2 3 X 6F-42 3 X 6F X 6F-60 4 X 6F-2 5 X 6F / X 6F H X 6F /4 X 6F / X 6F X 6F X 6F X 6F /4 X 6F /4 X 6F- 3 Effective: 04/16/ MAJESTIC = M CLASSIC = C WARRIOR = W For additional strength; all gate leaves greater than 6 feet in width will have an intermediate center upright, gusset plates will be welded in all four corners, and the appropriate quantity of turnbuckle and cable kits will be included. Custom gate dimensions are available upon request, but incur a 10% engineering charge based on the nearest larger standard gate leaf. PAGE 2.55 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

19 COMMERCIAL INDUSTRIAL II SWING GATES 2-Rail (Flush Bottom) (4 Air Gap) CLASSIC GENESIS MAJESTIC WARRIOR FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH X 258F X 258F-48 4 X 258F-60 5 X 258F-2 6 X 258F / X 258F H X 258F /4 X 258F / X 258F X 258F X 258F X 258F /4 X 258F /4 X 258F- 3 X 20F X 20F X 20F-60 6 X 20F-2 80 X 20F / X 20F H X 20F /4 X 20F / X 20F X 20F X 20F X 20F /4 X 20F /4 X 20F MAJESTIC = M CLASSIC = C WARRIOR = W For additional strength; all gate leaves greater than 6 feet in width will have an intermediate center upright, gusset plates will be welded in all four corners, and the appropriate quantity of turnbuckle and cable kits will be included. Custom gate dimensions are available upon request, but incur a 10% engineering charge based on the nearest larger standard gate leaf. Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.56

20 II INDUSTRIAL COMMERCIAL SWING GATES 2-Rail (Flush Bottom) (3 Air Gap) CLASSIC GENESIS MAJESTIC FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH 1R * X 4F-42 1R * X 4F-48 1R * X 4F R * X 4F R * X 4F / 1R * X 4F R * X 0F-42 1R * X 0F-48 3 H 1R * X 0F R * X 0F R * X 0F / 1R * X 0F R * X 6F R * X 6F H 1R * X 6F R * X 6F R * X 6F / 1R * X 6F R * X 258F R * X 258F H 1R * X 258F R * X 258F-2 4 1R * X 258F / 1R * X 258F-6 1R * X 20F R * X 20F H 1R * X 20F R * X 20F-2 8 1R * X 20F / 1R * X 20F-6 1 MAJESTIC = M CLASSIC = C WARRIOR = IN 3 AIR GAP For additional strength; all gate leaves greater than 6 feet in width will have an intermediate center upright, gusset plates will be welded in all four corners, and the appropriate quantity of turnbuckle and cable kits will be included. Custom gate dimensions are available upon request, but incur a 10% engineering charge based on the nearest larger standard gate leaf. Effective: 04/16/ PAGE 2.5 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

21 COMMERCIAL INDUSTRIAL II SWING GATES 3-Rail (Standard) CLASSIC GENESIS (4 Air Gap) MAJESTIC WARRIOR FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH H H / 1-3/4 3-1/ /4-3/4 5-1/ 1-3/4 3-1/ /4-3/4 5-1/ 1-3/4 3-1/ /4-3/4 X 3-42 X 3-48 X 3-60 X 3-2 X 3-84 X 3-6 X X 3-0 X 3-2 X 3-4 X X X 3-0 X 3- X 0-42 X 0-48 X 0-60 X 0-2 X 0-84 X 0-6 X X 0-0 X 0-2 X 0-4 X X X 0-0 X 0- X 6-42 X 6-48 X 6-60 X 6-2 X 6-84 X 6-6 X X 6-0 X 6-2 X 6-4 X X X 6-0 X 6- MAJESTIC = M CLASSIC = C WARRIOR = W MAJ/BLK For additional strength; all gate leaves greater than 6 feet in width will have an intermediate center upright, gusset plates will be welded in all four corners, and the appropriate quantity of turnbuckle and cable kits will be included. Custom gate dimensions are available upon request, but incur a 10% engineering charge based on the nearest larger standard gate leaf. Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.58

22 II INDUSTRIAL COMMERCIAL SWING GATES 3-Rail (Standard) (4 Air Gap) CLASSIC GENESIS MAJESTIC WARRIOR FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH X X X X X / X X H 1-3/4 X / X X X X /4 X /4 X X X MAJ, GEN/BLK X MAJ/BLK X X / X X H 1-3/4 X / X X X X /4 X /4 X 30-3 MAJESTIC = M CLASSIC = C WARRIOR = W For additional strength; all gate leaves greater than 6 feet in width will have an intermediate center upright, gusset plates will be welded in all four corners, and the appropriate quantity of turnbuckle and cable kits will be included. Custom gate dimensions are available upon request, but incur a 10% engineering charge based on the nearest larger standard gate leaf. Effective: 04/16/ PAGE 2.5 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

23 COMMERCIAL INDUSTRIAL II SWING GATES 3-Rail (Standard) (3 Air Gap) CLASSIC GENESIS MAJESTIC FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH 1R * X R * X R * X R * X R * X / 1R * X R * X R * X H 1R * X R * X R * X / 1R * X 0-6 1R * X R * X H 1R * X R * X R * X / 1R * X R * X R * X H 1R * X R * X R * X / 1R * X R * X R * X H 1R * X R * X R * X / 1R * X MAJESTIC = M CLASSIC = C WARRIOR = IN 3 AIR GAP For additional strength; all gate leaves greater than 6 feet in width will have an intermediate center upright, gusset plates will be welded in all four corners, and the appropriate quantity of turnbuckle and cable kits will be included. Custom gate dimensions are available upon request, but incur a 10% engineering charge based on the nearest larger standard gate leaf. Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.60

24 II INDUSTRIAL COMMERCIAL SWING GATES CLASSIC GENESIS 3-Rail (Flush Bottom) MAJESTIC WARRIOR (4 Air Gap) FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH X 3F X 3F X 3F X 3F-2 4 X 3F / X 3F X 3F /4 X 3F / X 3F X 3F X 3F X 3F /4 X 3F /4 X 3F X 0F-42 X 0F X 0F X 0F-2 4 X 0F / X 0F X 0F H 1-3/4 X 0F / X 0F X 0F X 0F X 0F /4 X 0F /4 X 0F- 2 3 X 6F X 6F X 6F X 6F-2 63 X 6F / X 6F H X 6F /4 X 6F / X 6F X 6F X 6F X 6F /4 X 6F /4 X 6F- 2 3 Effective: 04/16/ MAJESTIC = M CLASSIC = C WARRIOR = W For additional strength; all gate leaves greater than 6 feet in width will have an intermediate center upright, gusset plates will be welded in all four corners, and the appropriate quantity of turnbuckle and cable kits will be included. Custom gate dimensions are available upon request, but incur a 10% engineering charge based on the nearest larger standard gate leaf. PAGE 2.61 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

25 COMMERCIAL INDUSTRIAL II SWING GATES FAX: CLASSIC GENESIS 3-Rail (Flush Bottom) MAJESTIC WARRIOR (4 Air Gap) GATE HEIGHT GATE OPENING GATE LEAF WIDTH 4-1/2 H (ONLY AVAILABLE IN MAJESTIC) H H / 1-3/4 3-1/ /4-3/4 5-1/ 1-3/4 3-1/ /4-3/4 5-1/ 1-3/4 3-1/ /4-3/4 1W M X 4F-42 1W M X 4F-48 1W M X 4F-60 1W M X 4F-2 1W M X 4F-84 1W M X 4F-6 1W M X 4F-108 1W M X 4F-0 1W M X 4F-2 1W M X 4F-4 1W M X 4F-156 1W M X 4F-168 1W M X 4F-0 1W M X 4F- X 8F-42 X 8F-48 X 8F-60 X 8F-2 X 8F-84 X 8F-6 X 8F-108 X 8F-0 X 8F-2 X 8F-4 X 8F-156 X 8F-168 X 8F-0 X 8F- X 30F-42 X 30F-48 X 30F-60 X 30F-2 X 30F-84 X 30F-6 X 30F-108 X 30F-0 X 30F-2 X 30F-4 X 30F-156 X 30F-168 X 30F-0 X 30F- MAJESTIC = M CLASSIC = C WARRIOR = W For additional strength; all gate leaves greater than 6 feet in width will have an intermediate center upright, gusset plates will be welded in all four corners, and the appropriate quantity of turnbuckle and cable kits will be included. Custom gate dimensions are available upon request, but incur a 10% engineering charge based on the nearest larger standard gate leaf. Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.62

26 II INDUSTRIAL COMMERCIAL SWING GATES 3-Rail (Flush Bottom) (3 Air Gap) CLASSIC GENESIS MAJESTIC FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH 1R * X 3F R * X 3F-48 1R * X 3F R * X 3F R * X 3F / 1R * X 3F-6 6 1R * X 0F R * X 0F-48 3 H 1R * X 0F R * X 0F-2 5 1R * X 0F / 1R * X 0F-6 1R * X 6F R * X 6F-48 4 H 1R * X 6F R * X 6F-2 6 1R * X 6F / 1R * X 6F R M X 4F /2 H 1R M X 4F (ONLY 1R M X 4F-60 6 AVAILABLE IN 1R M X 4F-2 8 MAJESTIC) 1R M X 4F / 1R M X 4F R * X 8F R * X 8F H 1R * X 8F R * X 8F R * X 8F / 1R * X 8F R * X 30F R * X 30F H 1R * X 30F R * X 30F-2 3 1R * X 30F / 1R * X 30F-6 8 MAJESTIC = M CLASSIC = C WARRIOR = IN 3 AIR GAP For additional strength; all gate leaves greater than 6 feet in width will have an intermediate center upright, gusset plates will be welded in all four corners, and the appropriate quantity of turnbuckle and cable kits will be included. Custom gate dimensions are available upon request, but incur a 10% engineering charge based on the nearest larger standard gate leaf. Effective: 04/16/ PAGE 2.63 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

27 COMMERCIAL INDUSTRIAL II STEEL ARCHED GATES SINGLE GATE SPECIFICATIONS DOUBLE FAX: Construction Components for Nominal Gate Openings of thru : Construction Components for Nominal Gate Openings of thru 1: Gate Ends: 1-3/4 Sq. ( Ga.) Steel Rails: 1-/16 W x 1-1/ H ( Ga.) Steel Pickets: 3/4 Sq. ( Ga.) GATE DRAWING DIMENSIONAL FORMAT W Gate Ends: 1-3/4 Sq. ( Ga.) Steel Rails: 1-/16 W x 1-1/ H ( Ga.) Steel Pickets: 3/4 Sq. ( Ga.) (With gusset plates and cable kit) W H H P d W = Outside To Outside Width of Finished Gate Leaf H = Height; = Hinge Clearance; = Latch Clearance; = Gate Post Spacing (Inside-To-Inside) for Single Gate; P d = Gate Post Spacing (Inside-To-Inside) for Double Gate See Montage Plus Specification for Montage Plus Gate Post Recommendation HARDWARE KITS & POST INTERSPACES FOR SINGLE SWING STEEL ARCHED GATES NOMINAL GATE OPENING W = LEAF WIDTH FORK LATCH/BOX HINGE KITS #SGBSX25 OR #SGBSX3 AMERISTAR LOCK/BOX HINGE KIT #SGBSXA LOKKLATCH WITH TRU-CLOSE HINGE KIT #TCSGK TOP PULL LATCH WITH TRU-CLOSE HINGE KIT #TCPGK COMMERCIAL HINGE WITH STRONGARM KIT #CGBS-25, #CGBS-3 OR #CGBS-4 HEAVY COMMERCIAL HINGE KIT #HGB5-25, #HGBS-3 OR #HGB /8 41-1/ 41-1/ /4 Order 1 Leaf For Single Swing Opening Order 2 Leaves For Double Swing Opening 5/8 3/4 3/4 (Gate Post Spacing (Inside-To-Inside) for Single Gate = (Hinge Clearance) + W (Out-To-Out Gate Width) + (Latch Clearance) 53-1/ 52-1/ / 53-3/4 3/4 3/ / /4 61-3/8 60-1/4 60-1/4 62-3/ /8 6-1/ 6-1/ 2-1/4 HARDWARE KITS & POST INTERSPACES FOR DOUBLE SWING STEEL ARCHED GATES NOMINAL GATE OPENING W = LEAF WIDTH FORK LATCH / BOX HINGE KIT #SGBDX COMMERCIAL HINGE WITH STRONG ARM KIT #CGBD HEAVY COMMERCIAL HINGE KIT #HGBD / / P d (Gate Post Spacing (Inside-To-Inside) for Double Gate = 2 x (Hinge Clearance) + 2 x W (Out-To-Out Gate Width) + (Latch Clearance) 1-1/ 1 1-1/ 1-1/ / 1-1/ -1/ Warning: Steel Arched Gates with extended picket bottom exposure are not to be automated. This would cause a safety hazard and violate safety regulations. 8 Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.64

28 II INDUSTRIAL COMMERCIAL STEEL ARCHED GATES SINGLE SWING 2-Rail (4 Air Gap) CLASSIC MAJESTIC GENESIS FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH X 4-42A X 4-48A X 4-60A X 4-2A X 0-42A 32 X 0-48A 3 X 0-60A 44 H X 0-2A 50 X 6-42A 40 X 6-48A 43 X 6-60A 53 H X 6-2A 62 X A 50 X A 53 X A 64 H X 258-2A 5 X 20-42A 58 X 20-48A 63 X 20-60A 5 H X 20-2A 86 MAJESTIC = M CLASSIC = C Warning: Steel Arched Gates with extended picket bottom exposure are not to be automated. This would cause a safety hazard and violate safety regulations. Effective: 04/16/ PAGE 2.65 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

29 COMMERCIAL INDUSTRIAL II STEEL ARCHED GATES SINGLE SWING 2-Rail Flush Bottom (4 Air Gap) CLASSIC MAJESTIC GENESIS FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH X 4F-42A 2 X 4F-48A X 4F-60A 3 X 4F-2A 44 X 0F-42A 32 X 0F-48A 3 X 0F-60A 44 H X 0F-2A 50 X 6F-42A 40 X 6F-48A 43 X 6F-60A 53 H X 6F-2A 62 X 258F-42A 50 X 258F-48A 53 X 258F-60A 64 H X 258F-2A 5 X 20F-42A 58 X 20F-48A 63 X 20F-60A 5 H X 20F-2A 86 MAJESTIC = M CLASSIC = C Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.66

30 II INDUSTRIAL COMMERCIAL STEEL ARCHED GATES SINGLE SWING 3-Rail (4 Air Gap) CLASSIC MAJESTIC GENESIS FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH X 3-42A X 3-48A X 3-60A X 3-2A X 0-42A 3 X 0-48A 43 X 0-60A 50 H X 0-2A 51 X 6-42A 44 X 6-48A 48 X 6-60A 58 H X 6-2A 68 X 8-42A 53 X 8-48A 5 X 8-60A 6 H X 8-2A 80 X 30-42A 62 X 30-48A 6 X 30-60A 80 H X 30-2A 4 MAJESTIC = M CLASSIC = C Warning: Steel Arched Gates with extended picket bottom exposure are not to be automated. This would cause a safety hazard and violate safety regulations. Effective: 04/16/ PAGE 2.6 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM

31 COMMERCIAL INDUSTRIAL II STEEL ARCHED GATES SINGLE SWING 3-Rail Flush Bottom(4 Air Gap) CLASSIC MAJESTIC GENESIS FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH X 3F-42A 65 X 3F-48A 3 X 3F-60A 44 X 3F-2A 51 X 0F-42A 3 X 0F-48A 43 H X 0F-60A 50 X 0F-2A 51 X 6F-42A 44 X 6F-48A 48 H X 6F-60A 58 X 6F-2A 68 1W M X 4F-42A /2 H 1W M X 4F-48A 58 (ONLY 1W M X 4F-60A 6 AVAILABLE IN 1W M X 4F-2A 8 MAJESTIC) X 8F-42A 53 X 8F-48A 5 H X 8F-60A 6 X 8F-2A 80 X 30F-42A 62 X 30F-48A 6 H X 30F-60A 80 X 30F-2A 4 MAJESTIC = M CLASSIC = C Effective: 04/16/ TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM PAGE 2.68

32 II INDUSTRIAL COMMERCIAL STEEL ARCHED GATES All Double Swing Gates include two (2) Gate Leafs DOUBLE SWING 2-Rail (4 Air Gap) CLASSIC MAJESTIC GENESIS FAX: GATE HEIGHT GATE OPENING GATE LEAF WIDTH PER LEAF 1 X 4-84HD X 4-6HD X 4-0HD X 4-4HD X 4-168HD X 0-84HD 64 X 0-6HD 6 X 0-0HD 86 H X 0-4HD 6 1 X 0-168HD 2 X 6-84HD 8 X 6-6HD 84 X 6-0HD 102 H X 6-4HD 8 1 X 6-168HD 1 X HD 8 X 258-6HD 104 X 258-0HD 1 H X 258-4HD 2 1 X HD 154 X 20-84HD 1 X 20-6HD 1 X 20-0HD 2 H X 20-4HD X HD 0 MAJESTIC = M CLASSIC = C Warning: Steel Arched Gates with extended picket bottom exposure are not to be automated. This would cause a safety hazard and violate safety regulations. Effective: 04/16/ PAGE 2.6 TO PLACE YOUR ORDER CALL VISIT AMERISTARFENCE.COM