FAP 600 Series. High-Brightness Fiber-Coupled Bars. Superior Reliability & Performance. FAP 600 Series Features: High reliability

Transcription

1 FAP 600 Series Features: Fiber Array Packages (FAP) from Coherent are the highest quality fiber-coupled diode lasers in the industry, offering you the simplest way of delivering the output from a diode laser bar to your application. The FAP 600 series consists of a 19-element conduction-cooled diode laser bar, lensed and coupled to an 600 µm, multimode fiber bundle array. High reliability High efficiency High brightness Rugged construction FAP 600 Series Applications: Solid-state Laser Pumping Plastic Welding Soldering Heating Superior Reliability & Performance

2 FAP600-22W- FAP600-25W- FAP600-25W- Device Specifications 975.0to980.0-F<4.5-25C 800to820nm 805.0to811.0-F<3.5-25C Part Number Optical Specifications 1 CW Output Power (W) Center Wavelength 2 (nm) Center Wavelength Tolerance (nm) +3/-2 ±7.5 ±3.0 Spectral Width 2 (nm) <4.5 <6.0 <3.5 Wavelength Temperature Coefficient (nm/ C) Beam Divergence 3 (NA) <0.14 <0.16 <0.16 Beam Diameter (μm) Electrical Characteristics (typical) Slope Efficiency (W/A) >0.75 >0.9 >0.9 Conversion Efficiency (%) >35 >35 >40 Threshold Current (A) 2 to 4 6 to 8 6 to 9 Operating Current (A) <34 <41 <36 Operating Voltage (V) <2.1 <2.0 <2.0 Recommended Hookup Wire (gauge) 8 or heavier 8 or heavier 8 or heavier Thermal Specifications Thermal Resistance (typical)( C/W) Case Operating Temperature ( C) -20 to to to 30 Case Storage Temperature ( C) -20 to to to 60 Recommended Heat Sink Capacity (W) Thermal Resistance ( C/W) <0.1 <0.1 <0.1 Weight 300 g (10.3 oz.) 300 g (10.3 oz.) 300 g (10.3 oz.) Fiber Connector SMA 905 SMA 905 SMA All values measured at case temperature (TC) = 25 C. 2 Custom center wavelengths and custom spectral widths are available, some from stock. Consult your Coherent representative. 3 The numerical aperture of the output beam is defined as the sine of the half-angle of the divergence cone that encircles 90% of the energy.

3 FAP600-22W- FAP600-25W- FAP600-25W- FAP600-50W-800.0to Device Specifications 975.0to980.0-F<4.5-25C 800to820nm 805.0to811.0-F<3.5-25C FW90E<8.0-25C Part Number Optical Specifications 1 CW Output Power (W) Center Wavelength 2 (nm) Center Wavelength Tolerance (nm) ±10.0 ±10.0 ±10.0 ±10.0 Spectral Width 2 (nm) <6.0 <6.0 <6.0 <8.0 Wavelength Temperature Coefficient (nm/ C) Beam Divergence 3 (NA) <0.16 <0.14 <0.14 <0.16 Beam Diameter (μm) Electrical Characteristics (typical) Slope Efficiency (W/A) >0.8 >0.9 >0.9 >1.0 Conversion Efficiency (%) >38 >40 >40 >52 Threshold Current (A) 2 to 4 6 to 8 6 to 9 8 Operating Current (A) <34 <46 <36 <55 Operating Voltage (V) <2.0 <2.0 <2.0 <2.0 Recommended Hookup Wire (gauge) 8 or heavier 8 or heavier 8 or heavier 8 or heavier Thermal Specifications Thermal Resistance (typical)( C/W) Case Operating Temperature ( C) -20 to to to to 30 Case Storage Temperature ( C) -20 to to to to 60 Recommended Heat Sink Capacity (W) Thermal Resistance ( C/W) <0.1 <0.1 <0.1 <0.1 Weight 300 g (10.3 oz.) 300 g (10.3 oz.) 300 g (10.3 oz.) 300 g (10.3 oz.) Fiber Connector SMA 905 SMA 905 SMA 905 SMA All values measured at case temperature (TC) = 25 C. 2 Custom center wavelengths and custom spectral widths are available, some from stock. Consult your Coherent representative. 3 The numerical aperture of the output beam is defined as the sine of the half-angle of the divergence cone that encircles 90% of the energy.

4 3.0 mm 6.4 mm (0.25 in.) 19.1 mm (0.75 in.) Top 31.8 mm (1.25 in.) 16.4 mm (0.64 in.) 13.4 mm (0.53 in.) Side 25.8 mm (1.02 in.) 8.6 mm (0.34 in.) 9.5 mm (0.375 in.) Bottom 3.1 mm 70.0 mm (2.75 in.) 57.1 mm (2.25 in.) 12.7 mm (0.50 in.) 15.8 mm (0.62 in.) 2X Ø3.8 mm Thru (0.15 in.) Ø2.0 mm (0.08 in.) 22.2 mm (0.88 in.) See Detail A Ø3.3 mm (0.13 in.) Thru First Wall 4X Ø4.0 mm Thru (0.16 in.) Front 8.8 mm (0.35 in.) 11.7 mm (0.46 in.) 21.1 ±1.0 mm (0.83 ±0.04 in.) 14.8 mm (0.58 in.) AR Coated 3.3 mm (0.13 in.) 1.6 ±0.025 mm (0.06 ±0.001 in.) SMA 905 Male Connector Ø600 µm Fiber Bundle 17.3 mm (0.68 in.) 4.3 mm (0.17 in.) 15.9 mm (0.63 in.) 2.2 mm (0.09 in.) 2X R Detail A (scale 3.0) Nose Length 9.77 to 9.80 mm ( to in.)

5 Top 3.0 mm 6.4 mm (0.25 in.) 31.8 mm (1.25 in.) 16.4 mm (0.64 in.) 19.1 mm (0.75 in.) 13.4 mm (0.53 in.) 9.53 mm (0.375 in.) Bottom 3.1 mm 70.0 mm (2.75 in.) 12.7 mm (0.50 in.) 15.8 mm (0.62 in.) Scale mm 57.1 mm (2.25 in.) 2X Ø3.8 mm Thru (0.15 in.) See Detail A 4X Ø4.0 mm Thru (0.16 in.) 15.9 mm (0.63 in.) 8.8 mm (0.35 in.) 11.7 mm (0.46 in.) ±25.4 mm (39.4 ±1.0 in.) 38.1 mm (1.5 in.) Ø3.3 mm (0.13 in.) 22.2 mm (0.88 in.) Ø2.0 mm (0.08 in.) Front 4.3 mm (0.17 in.) 17.3 mm (0.68 in.) 3.3 mm (0.13 in.) SMA 905 Male Connector 1.6 ±0.025 mm (0.06 ±0.001 in.) 14.8 mm (0.58 in.) Side 8.6 mm (0.34 in.) 25.8 mm (1.02 in.) 2.2 mm (0.09 in.) 2X R Detail A (scale 3.0) Coherent follows a policy of continuous product improvement. Specifications are subject to change without notice. Coherent s scientific and industrial lasers are certified to comply with the Federal Regulations (21 CFR Subchapter J) as administered by the Center for Devices and Radiological Health on all systems ordered for shipment after August 2, Coherent offers a limited warranty for all Fiber Array Packages. For full details of this warranty coverage, please refer to the Service section at or contact your local Sales or Service Representative. Coherent, Inc., 5100 Patrick Henry Drive Santa Clara, CA phone (800) (408) fax (408) tech.sales@coherent.com Printed in the U.S.A. MC M0615Rev.D Copyright 2015 Coherent, Inc. Benelux +31 (30) China +86 (10) France +33 (0) Germany/Austria/ Switzerland +49 (6071) Italy +39 (02) Japan +81 (3) Korea +82 (2) Taiwan +886 (3) UK/Ireland +44 (1353)