Ported Gun Perforating System
|
|
- Emil West
- 5 years ago
- Views:
Transcription
1 Ported Gun Perforating System Jet Research Center s ported gun perforating systems provide users with economical, reusable guns for multipurpose applications. Applications Multi-zone shooting on a single run with selectfire subs Hostile environment Short guns available for squeeze applications Features Charges are protected from well fluids, formation pressure and abrasion Debris retained in hollow carrier Carrier protects casing from detonation shock Charges for high-temperature environments available upon request Charges are tested to API standards Charges are designed to minimize internal damage to the gun body, prolonging life The gun design has minimized charge interference Options 3 1/8-in. to 4-in. gun sizes Big hole and deep penetrating charges Port plugs are rated at 16,000 psi and 400 o F 0 o and 120 o phasing other phase angles available upon request Benefits Prolonged gun life and economical operations Proven reliable technology Reusable gun body allows economic operations
2
3 3 1/8-in. Ported Gun 3 1/8-in. Ported Gun Item Description Part No. 1 Carrier - 3 ft, 0 Phasing, 8 Shots Carrier - 7 ft, 0 Phasing, 24 Shots Carrier - 11 ft, 0 Phasing, 40 Shots Carrier - 3 ft, 120 Phasing, 8 Shots Carrier - 7 ft, 120 Phasing, 24 Shots Carrier - 11 ft, 120 Phasing, 40 Shots A Top Sub - Halliburton, Q.C B Top Sub - JRC/Go Q.C O-ring, Buna 0 Duro #222 for item 2A O-ring, Buna 0 Duro #230 for item 2B Tandem Sub Tandem Sub - S.F Bull Plug Port Plug Alignment Sleeve yellow Alignment Sleeve dark gray Alignment Sleeve red Alignment Sleeve green O-ring, Buna 0 Duro # O-ring, Viton 5 Duro # Lead Wire Sleeve Lead Wire - Stranded, 1,000 ft Yellow A Lead Wire - Stranded *Teflon, 500 ft HT B Lead Wire - Solid Red Electric Connection - Pigtail Contact Retainer - JRC Style A Contact Retainer - Halliburton Style Grounding Device Charge - RDX, 12.0g, DP, 3 1 / 8 in. GS Detonating Cord See Appendix A 16A RED Block Detonator B Fluid-Sensitive Block - Resistorized C Fluid-Sensitive Detonator Blast Sleeve N/A NS Double Diode Assy. f/dual Fire Split Dart Dart Retainer Nut Dart Seal Seat O-ring f/seat Port Plug Wrench / 8 in. to 4 in. guns Thread Tap - 7 / 8 in. x 12 f/3 1 / 8 in. to 4 in. guns Charge Loading Tool / 8 in. to 3 3 / 8 in. x 7 ft guns Charge Loading Tool / 8 in. to 3 3 / 8 in. x 11ft guns Alignment Sleeve Pliers Detonating Cord Cutter Nylon Seizing Cord Rubber Detonating Cord End Seal Aluminum End Seal Port Plug Air-Impact Wrench No-Gall Lubricant - 14 oz Port Plug Extractor Lead Wire Threading Tool NS Not Shown in Drawing *Teflon is a trademark of E.I. Dupont De Nemours 16c /8-in. Ported Gun
4 3 1/8-in. Ported Gun 0 o Phasing 4 Perforation Planes 4-spf 0 Phasing 120 o Phasing 3 Perforation Planes 4-spf 120 Phasing
5 4-in. Ported Gun 4-in. Ported Gun 1 Carrier - 3 ft, 0 Phasing, 8 Shots Carrier - 7 ft, 0 Phasing, 24 Shots Carrier - 11 ft, 0 Phasing, 40 Shots Carrier - 3 ft, 120 Phasing, 8 Shots Carrier - 7 ft, 120 Phasing, 24 Shots Carrier - 11 ft, 120 Phasing, 40 Shots A Top Sub - Halliburton, Q.C B Top Sub - JRC, Q.C O-ring, Buna 0 Duro #222 for item 2A O-ring, Buna 0 Duro #230 for item 2B Tandem Sub Tandem Sub - Select Fire Bull Plug Port Plug - Long Alpha Style Port Plug - Short Titan Style Alignment Sleeve green Alignment Sleeve blue Alignment Sleeve white Alignment Sleeve red O-ring, Buna 0 Duro # O-ring, Viton 5 Duro # Lead Wire Sleeve Lead Wire - Stranded, 1,000 ft Yellow A Lead Wire - Stranded Teflon, 500 ft HT B Lead Wire - Solid Red Electric Connection - Pigtail Contact Retainer - JRC Style A Contact Retainer - Halliburton Style Grounding Device *14 Charge - RDX, 1.5g, DP, 4 in. GS Detonating Cord See Appendix A 16A Red Block Detonator B Fluid Sensitive Block C Fluid Sensitive Detonator Blast Sleeve NS Double Diode Assy f/dual Fire Split Dart Dart Retainer Nut Dart Seal Seat O-ring f/seat Port Plug Wrench / 8 in. to 4 in. guns Thread Tap - 7 / 8 in. x 12 f/3 1 / 8 in. to 4 in. guns Charge Loading Tool - 4 in. x 7 ft Charge Loading Tool - 4 in. x 11 ft Alignment Sleeve Pliers Detonating Cord Cutter Nylon Seizing Cord Rubber Detonating Cord End Seal Aluminum End Seal Port Plug Air-Impact Wrench No-Gall Lubricant - 14 oz Port Plug Extracotr Lead Wire Threading Tool NS Not Shown in Drawing *Teflon is a trademark of E.I. Dupont De Nemours **Charge Uses Industry Standard Washer 16c 17 4-in. Ported Gun
6 4-in. Ported Gun 0 o Phasing 4 Perforation Planes 4-spf 0 Phasing 120 o Phasing 3 Perforation Planes 4-spf 120 Phasing
Directional Valves. Hydraulic Operated Directional Valves
Service Data Vickers Directional Valves Hydraulic Operated Directional Valves (F*) DG3V 8 (B) ** (L) (X) (*) (*) 10 (EN**) Released 04/96 5007.03/EN/0496/S DG3V-8-*(C) - (X) - 10 Spring Centered 473726
More informationField Loading Procedures Casing Cutters
JRC Explosive Jet Cutters with Aluminum and/or Steel Housings 3.625 Inch (92.1 mm) to 8.188 (208.0 mm) O.D. for Casing and Tubing 4 1/2 (4.500) Inch (114.3 mm) to 9 5/8 (9.625) Inch (244.5 mm) O.D. Field
More information5k Slickline Lightweight Pressure Control Equipment 4 ID
5k Slickline Lightweight Pressure Control Equipment 4 ID Table of Contents 5k Slickline Lightweight Pressure Control Equipment 4 ID... 1 Hydraulic Slickline Stuffing Box... 3 Wireline Lubricators... 4
More informationshutoff valves 900 Series psig Manual Shutoff Valves
0 6000 psig Manual Shutoff Valves Features Zero leakage Protected o-ring Full flow passages Freedom from wire drawing Panel mount standard Hand wheel or toggle handle How it Works Closed O-ring seal on
More informationPressure Dump Valve Service Kit for Series 2300 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 00 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00 applicator tanks when the unit
More informationMODULAR FLEXIBLE PERFORATING SYSTEM. PERFORATING-EXPLOSIVE OPERATIONS RISK MITIGATION AND EFFICIENCY IMPROVEMENT RIPS-17-18
MODULAR FLEXIBLE PERFORATING SYSTEM. PERFORATING-EXPLOSIVE OPERATIONS RISK MITIGATION AND EFFICIENCY IMPROVEMENT Iakuba A. RIPS-17-18 Content 1. Introduction: General information 2. Design features and
More informationFITTINGS THREAD LUBRICANTS. Fittings 20,000 PSI
Jetstream offers a wide variety of fittings with various connection types to fit your 20,000 psi application needs. The standard connection types, Type M, MP, and MP Tube lance, are available in standard
More informationPerforation Techniques in brown fields for Production optimization.
P-085 Perforation Techniques in brown fields for Production optimization. Summary *Prof. Asit Kumar Samadder,UPES Different techniques are adopted for perforation like conventional perforation with casing
More informationJet Research Center Drill Collar Severing Tool (DCST)
Jet Research Center Drill Collar Severing Tool (DCST) Field Loading Procedures WARNING Refer to and apply the procedures listed in the Recommended Practices for Oilfield Explosives Safety; API Recommended
More informationChoosing the right miniature instrument and control valve is a snap
Choosing the right miniature instrument and control valve is a snap INVALCO Micro Valve The Micro Valve is a unique miniature valve offering versatility and rugged construction. Since its introduction
More informationSALCO PRODUCTS, INC. PRESSURE RELIEF VALVE STORAGE, INSTALLATION, OPERATING, MAINTENANCE/TESTING, AND INSPECTION INSTRUCTIONS
STORAGE INSTRUCTIONS Until it is time to install a new or reconditioned valve on the car, the valve must be kept in its original packaging in order to protect it from dirt and damage. INSTALLATION INSTRUCTIONS
More informationStimTube Assembly Deployment and Guide
Deployment and Guide Owen Oil Tools 12001 CR 1000 Godley, Texas, 76044, USA Phone: +1 (817) 551-0540 Fax: +1 (817) 551-1674 www.corelab.com/owen Warning: Use of Owen equipment contrary to manufacturer's
More informationDB Bridge Plug. Features. Benefits. Applications
DB Bridge Plug The WELLFIRST Premium Cast Iron Bridge Plug designed to run on electric line. Rated between 2000-10000-psi differential, and 300 F from above and below. Features Field Proven Design Constructed
More informationTesting Services Overview
2 Jet Research Center JRC Jet Research Center Perforating Center of Excellence Testing Services Overview API RP19B Testing Advanced Testing Operational Testing API RP19B Testing The American Petroleum
More informationInstallation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Probe Instrument Regulator Model The information in this manual has been carefully checked for accuracy and is intended to be used as a guide for
More informationDisassembling and assembling APP and APP 16-22
MAKING MODERN LIVING POSSIBLE Instruction Disassembling and assembling APP 11-13 and APP 16-22 ro-solutions.com Table of Contents 1. Disassembling...3 2. Disassembling the pump...3 3. Assembling the pump....7
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Models No. TD0101, TD0101F Description Impact Driver L PRODUCT P 1/ 14 CONCEPT AND MAIN APPLICATIONS Models TD0101 and TD0101F are cost-competitive 100N.m-class impact driver developed
More informationAquor House Hydrant V2
Aquor House Hydrant V2 IN-WALL OUTDOOR FAUCET SYSTEM FLUSH-MOUNT QUICK-CONNECT SELF-DRAINING ANTI-SIPHON NON-FREEZE VBH-SERIES AQUOR HOUSE HYDRANT V2: WALL HYDRANT / FREEZELESS SILLCOCK Freezeless sillcock
More informationReplacing the Reverse Osmosis ( RO ) Membranes
Replacing the Reverse Osmosis ( RO ) Membranes Changing your membranes is a relatively straightforward procedure that can be achieved by carefully following these instructions. During disassembly, water
More informationThreaded Closures Installation, Operation & Maintenance
Howard Street Bulletin TT Louisville, KY 0 USA Revised Jan 0 Phone 0--0 Fax 0--00 Threaded Closures Installation, Operation & Maintenance Caution: Operating a closure can be a hazardous activity and certain
More informationInline Swivels Switch Your Swivel!
Inline Swivels Switch Your Swivel! HOW TO ORDER BODY OPTIONS 9 SS 8 FP 50 X FP 50 Z - V SS-SINGLE PLANE DP- DUAL PLANE SERIES ( ) THREAD SIZE MULTIPLES OF 100 FOR N.P.T.F. MULTIPLES OF 16 FOR J.I.C., O.R.B.
More informationDynamic Underbalance (DUB)
Dynamic Underbalance (DUB) Perforating Cam Le Perforating Product Champion Agenda Overview DUB Software Tools Case histories 2011 HALLIBURTON. ALL RIGHTS RESERVED. 2 Dynamic Underbalance Software Dynamic
More informationINSTALLING THE TRIDENT 11, 13 OR 15 RUDDER
INSTALLING THE TRIDENT 11, 13 OR 15 RUDDER Parts Included: Steering Parts: Foot Rail Parts: Rudder Parts: Retraction Parts: 4 - Rubber 2 - Rail Assemblies 1 - Rudder Body 1 - Rudder Retraction Grommets
More informationPressure Dump Valve Service Kit for Series 3000 Units
Instruction Sheet Pressure Dump Valve Service Kit for Series 000 Units. Overview The Nordson pressure dump valve is used to relieve hydraulic pressure instantly in Series 00, 400, 500, and 700 applicator
More informationHomestead Series 820 AWWA Butterfly Valves
Homestead Series 820 AWWA Butterfly Valves Dependable Valves for Water & Wastewater Service BODY: The ductile iron body meets or exceeds the design strength requirements of the AWWA C504 standards. Flange
More informationFIK In-Tank Filters FIK. Max Flow: 170 gpm (643 lpm) Working Pressures to: Rated Static Burst to: Flow Range to:
LOW PRESSURE FILTERS Max Flow: gpm ( lpm) In-Tank Filters Working Pressures to: Rated Static Burst to: psi kpa bar psi kpa bar Flow Range to: gpm lpm Features STYLE C STYLE D STYLE E in-tank filters are
More informationBall Valves Subsea Series
Ball Valves Subsea Series Internal Pressures to 20,000 psi (1379 bar) Water Depths to 12,500 ft (3810 meters) Autoclave Engineers subsea ball valves have been designed to fulfill the ever growing demand
More informationDean Pump Self-Priming Chemical Process Pumps
Bulletin C 1.2.34.7 Dean Pump Self-Priming Chemical Process Pumps php Series HEAD CAPACITY RANGE CHARTS php Self Primer - 2 Pole 3500 RPM 500 CAPACITY M 3 /HR 2900 RPM 50 HERTZ 25 50 75 125 150 400 TOTAL
More informationHydraulic Punch Drivers
INSTRUCTION MANUAL 7804SB / 7806SB Quick Draw 7704SB / 7706SB Quick Draw Flex 7904SB / 7906SB Quick Draw 90 Quick Draw Hydraulic Punch Drivers Serial Codes AHJ, YZ, and ZA Read and understand all of the
More informationPerforating Center of Excellence TESTING SERVICES OVERVIEW
Perforating Center of Excellence TESTING SERVICES OVERVIEW Jet Research Center (JRC) is the leader in energetic research and testing for the oil and gas industry. Since introducing jet perforators for
More informationOPERATING AND MAINTENANCE MANUAL
CONTENTS PAGE INTRODUCTION 1 Installation Compatibility 1 Required Tools and Materials 1 Preparing Valve and Flanges 1 1.0 INSTALLATION 2 1.1 INSTALLATION OF ALL 2- TO 12-IN. SPAN-TYPE VALVES 2 1.2 INSTALLATION
More informationAPPENDIX A MAIN ASSEMBLIES
32 Gorski G2000SS Diving Helmet Technical Manual APPENDIX A MAIN ASSEMBLIES MANIFOLD BODY ASM SEE APPENDIX C 25 ft.lbs (34 Nm) 22 SS Blank Plug INNER 90 in.lbs COMPONENTS (10 Nm) INNER COMPONENTS SEE APPENDIX
More informationCentury Valve. Flow Control. Century Valve Hand Valves, Large Bore, Severe Service, and Isolation Valves. Total Flow Control Solutions.
Century Valve Bore Sizes: 1/8 [3.2 mm] 3/16 [4.8 mm] 5/16 [8 mm] 3/8 [9.5 mm ] 7/16 [11 mm] 5/8 [16 mm] Straight through (roddable) and globe-pattern models. Needle (rising plug) and ball stem end models.
More informationINDUSTRIAL VALVES MODELS: C62-A; C62-D. INSTRUCTION MANUAL Installation Operation Parts Service DIAPHRAGM BYPASS PRESSURE REGULATING VALVES
INSTRUCTION MANUAL Installation Operation Parts Service IMPORTANT Record your Regulator model number and serial number here for easy reference: Model No. Serial No. Date of Purchase When ordering parts
More informationV48 Series 3-Way Pressure-Actuated Water-Regulating Valves With Union Fittings
Installation Instructions V48 Issue Date 08/30/01 V48 Series 3-Way Pressure-Actuated Water-Regulating Valves With Union Fittings Application IMPORTANT: The V48 Series 3-Way Pressure-Actuated Water-Regulating
More informationSpecifications For Threaded and Butt Weld Hammer Unions
.02 Introduction Pacific Hoseflex offers a comprehensive range of standard and sour gas. Each union is thoroughly inspected to ensure long, dependable service in the most extreme conditions. - Three lug
More informationIndustrial TE-5.5-MD-CK. Applications. Features. Construction
Industrial TE-5.5-MD-CK Applications Circulation of highly corrosive acids, alkalis, solvents, brine, plating solutions, sterile solutions, and other highly corrosive chemicals and solutions that are compatible
More informationGILMONT ACCUCAL FLOWMETERS
OPERATING MANUAL GILMONT ACCUCAL FLOWMETERS 28W092 Commercial Ave. Barrington, IL U.S.A. 60010-2392 (847) 381-4888 (847) 381-7053 (Fax) 800-962-7142 www.barnant.com e-mail: barnant@barnant.com A-1299-0766
More informationSAILTEC, INC CONGER COURT, OSHKOSH, WI USA
OK to make this valve hand tight. Pin Mount Style Integral lies 4-5 Degrees above Horizontal. If you store your Hunter "bow down" you will get air-lock in the Integral. Slot Mount Style Pump Body "Down"
More informationVEP Series VEP-BOP Series. canada.dixonvalve.com Customer Service:
UFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFACTURING QUALITY SERVICE MANUFAC VEP Series VEP-BOP Series Customer Service: 877.963.4966 Body Technical Specifications Pressure Rating Burst
More informationHodge Clemco Ltd. SG-300 Suction Gun. Owner s Manual. Hodge Clemco Ltd
Page 1 of 10 Hodge Clemco Ltd SG-300 Suction Gun Date of issue: 24/08/92 TS.OM64A Owner s Manual Hodge Clemco Ltd Orgreave Drive Sheffield S13 9NR Tel: 0114 254 8811 Email sales@hodgeclemco.co.uk www.hodgeclemco.co.uk
More informationLIST NO.E078 ENGINE. ENGINE BRUSH CUTTER Model CG 27EAS (E1)
LIST E078 (E1) ENGINE ENGINE BRUSH CUTTER Model 2010 7 16 A B 1 2 1 3 4 5 6 7 16 15 17 13 8 9 10 11 12 13 14 15 18 19 20 11 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46
More information600 o F High Temperature Aging Cell Instruction Manual
600 o F High Temperature Aging Cell Instruction Manual Manual No. D00654827, Revision E Instrument No. 102111608 600 o F High Temperature Aging Cell Instruction Manual 2013 Fann Instrument Company Houston,
More informationPerforation Design for Well Stimulation. R. D. Barree Barree & Associates LLC
Perforation Design for Well Stimulation R. D. Barree Barree & Associates LLC Typical Shaped Charge Primer charge Main explosive charge Case or container Detonating cord groove ¾ point of initiation Liner
More informationV46 Series 2-Way Pressure-Actuated Water-Regulating Valves With Union Fittings
Installation Instructions V46 Issue Date 11//1 V46 Series -Way Pressure-Actuated Water-Regulating Valves With Union Fittings Application IMPORTANT: The V46 Series -Way Pressure-Actuated Water-Regulating
More informationBooster Pump PB4-60 Replacement Kits
Booster Pump PB4-60 Replacement Kits FOR YOUR SAFETY - This product must be installed and serviced by a contractor who is licensed and qualified in pool equipment by the jurisdiction in which the product
More informationContents. Stainless Steel Side Block. 1.1 Separating the Side Block. Stainless Steel Side Block Reassembly of. Assembly from the Helmet Shell
Separating the Side Block Assembly from the Helmet Shell Contents SSB-1 SSB-3 SSB-5 SSB-5 SSB-7 1.1 Separating the Side Block Assembly from the Helmet Shell 1.2 Side Block Assembly Replacement 1.3 Defogger
More informationINSTALLING THE PROWLER 13 RUDDER
INSTALLING THE PROWLER 13 RUDDER Parts Included: Steering Parts: Foot Rail Parts: Rudder Parts: Retraction Parts: 4 Rubber 2 Rail Assemblies Rudder Body 1 Rudder Retraction Grommets (includes steering
More informationBinks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP
Binks SG-2 Plus TM Rotary 2 QT. PRESSURE CUP Model No. 80-651 Rotary Agitator INTRODUCTION Binks SG-2 TM Plus Rotary 2 Qt. Pressure Cup is ideal for component spraying and industrial applications where
More informationDP Spare parts list. Demolition pulverizer. DP 2800 s/n DEQ Construction Tools GmbH No
DP 2800 Spare parts list Demolition pulverizer DP 2800 s/n DEQ139266-2018 Construction Tools GmbH No. 3390719501 2018-01-01 General information This spare parts list applies to the following: Part number
More informationAging Cell, OFITE Style. Included Items
DRILLING FLUIDS EQUIPMENT For over 30 years OFI Testing Equipment (OFITE) has provided instruments and reagents for testing drilling fluids, well cements, completion fluids, and wastewater. In addition
More informationPRESSURE COMPENSATORS TECNORD
PRESSURE COMPENSATORS 2-way, Compensating / Reducing Valves GPM PSI LPM BAR MODEL CAVITY PAGE 8 3500 30 245 DF-CP2 7/8 14 UNF 60 16 3500 60 245 QC-CP2 Special 62 Typical Schematic Typical application for
More informationPneumatic Powered - Plunger Pumps
Models 42/62/82 D Series P.O. Box 80769 Lafayette, LA 70598-0769 (337) 235-9838 FAX (337) 235-9852 www.sidewinderpumps.com Pneumatic Powered - Plunger Pumps Suggested Installation & Operating Instructions
More informationFord Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
More informationOWNER S MANUAL SUCTION GUN SG-300
OWNER S MANUAL SUCTION GUN SG-00 Clemco International GmbH Carl-Zeiss-Straße Tel.: +49 (0) 806 90080 805 Bruckmühl Mail: info@clemco.de Germany Web: www.clemco-international.com Revision: 0.05 SG-00 SUCTION
More informationAPP pumps APP and APP Disassembling and assembling
Service guide APP pumps APP 11-13 and APP 16-22 Disassembling and assembling hpp.danfoss.com Table of Contents Contents 1. Introduction... 2 2. Disassembling the pump... 3 3. Assembling the pump... 6 4.
More informationModels: C62/63/64-A/D
Installation & Service C62-991-24A3 Models: C62/63/64-A/D Diaphragm Bypass Pressure Regulating Valves IMPORTANT Record your pump model number and serial number here for easy reference: Model No. Serial
More informationPerforating Options Currently Available in Horizontal Shale Oil and Gas Wells. Kerry Daly, Global BD Manager- DST TCP
MENAPS 2013 Perforating Options Currently Available in Horizontal Shale Oil and Gas Wells Kerry Daly, Global BD Manager- DST TCP MENAPS 13-17 WELL FLOW MANAGEMENT TM Scope/ Contents: MENAPS 13-17 Study
More informationINSTALLATION, OPERATION AND MAINTENANCE GUIDE
INSTALLATION, OPERATION AND Placement in Pipeline System When installing Process Development & Control s ElastoTITE Elastomer-Hinged Check Valves in a pipeline, a minimum of five pipe diameters should
More informationRUBBER EXPANSION JOINTS
RUBBER EXPANSION JOINTS SPOOL-TYPE STANDARD ARCH 150, 200, 200XL The heavy duty proven "industry work horse" Time tested performer Fabric and steel reinforced Constructed for maximum strength and reliability.
More informationORIENTED PERFORATING SYSTEM FOR SAND PREVENTION IN VERTICAL WELLS NAPS-17 AUTHORS: Jason Cook
ORIENTED PERFORATING SYSTEM FOR SAND PREVENTION IN VERTICAL WELLS 2018-NAPS-17 AUTHORS: Jason Cook Outline Background Customer Requirements / Challenge Solution Results Questions Background: Why Orient?
More informationSPECIFICATIONS. Approximate Weight: 10 oz. Surface Finish: Ra micro inch or less MATERIALS OF CONSTRUCTION
DIFFUSION-RESISTANT, DIAPHRAGM SEAL, EXCESS FLOW SHUT-OFF VALVES (FS SERIES) FS Series Excess Flow Shut-Off Valves are designed to automatically shut-off the delivery of gas in a line if the flow exceeds
More informationSADfab Delrin Bushing Kit Installation Instructions For Mazda Miata
SADfab Delrin Bushing Kit Installation Instructions For 90-05 Mazda Miata Kit Contents: Bushings: X4 FUCA delrin bushings (front upper control arm) X2 FLCA-f-f delrin bushings (front lower control arm,
More informationHydro-Mech Bridge Plug
Manual No: 0620000303 Revision: F Approved By: Quality Engineer Date: 2014-9-9 Hydro-Mech Bridge Plug DESCRIPTION: Map Hydro-Mech Bridge Plug is hydraulically actuated and mechanically set. Compact, with
More informationReducing Nonproductive Time
Reducing Nonproductive Time Pipe Recovery Services Solving challenges. Pipe Recovery Services Pipe Recovery Services Halliburton offers a wide range of free point indicators, severing tools and experienced
More informationHP-104 & HP-106 Tapping Machine OPERATIONS MANUAL
30230 Los Alamos Rd. Murrieta, CA 92563 800-279-5659 FAX 951-926-2334 TappingMachines.com HP-104 & HP-106 Tapping Machine OPERATIONS MANUAL & OPERATING INSTRUCTIONS WARNING READ: Before using this product,
More informationLIST NO. E948 SLIDE COMPOUND SAW. Model C 8FSE (E1)
Model C FSE SLIDE COMPOUND SAW LIST E94 (E1) 42 A A 1 2 3 4 10 5 6 9 11 14 15 12 16 1 1 19 20 21 23 26 25 24 29 30 2 2 33 31 32 53 4 4 49 46 34 36 3 39 40 35 3 45 42 50 54 56 5 5 52 13 22 41 51 612 613
More informationContinental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationTeam Insert Valve Sample Specification The Insert Valve shall conform to the following:
Team Insert Valve Sample Specification The Insert Valve shall conform to the following: The Ductile Iron 250 p.s.i.g. Insert Valve shall be a Resilient Wedge Gate Valve designed for use in potable water,
More informationSection 3000 CONVEYOR CHAIN LUBRICATION SCHEMATIC...39 AIR OPERATED SPRAY DISPENSERS - CENTRAL ACRYLIC RESERVOIR Section 3000 Index
Section 3000 AIR OPERATED SPRAY DISPENSERS - CENTRAL ACRYLIC RESERVOIR...36 Versatile type of lubrication able to feed liquid to elevated, distant or inaccessible points. CONVEYOR CHAIN LUBRICATION SCHEMATIC...39
More information2 Sentry MVS Installation, Operation & Maintenance
Gas Liquid & Slurry Solid & Powder Steam & Water Installation, Operation & Maintenance Manual Original Instructions Liquid Sampling Manual Low-Emission Samplers S-LS-IOM-0026-4 -7 Sentry MVS 966 Blue Ribbon
More informationQuick Start Guide LIQ-QSG-499AOZ, Rev M July Rosemount 499AOZ. Dissolved Ozone Sensor
Quick Start Guide LIQ-QSG-499AOZ, Rev M July 2017 Rosemount 499AOZ Dissolved Ozone Sensor Safety information CAUTION! SENSOR/PROCESS APPLICATION COMPATIBILITY The wetted sensor material may not be compatible
More informationSAPAG. Safety valves, type 5700 Storage, Use, Operation and Maintenance Instructions. IMPORTANT NOTICE
SAPAG IMPORTANT NOTICE Contents Important notice 1 0 Valve identification 2 1 Storage 2 2 Installation 2 3 Operation 2 4 Maintenance 3 4.1 Dismantling 3 4.2 Inspection 3 4.3 Repair 3 4.4 Assembly 4 4.5
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationTELEDYNE HASTINGS INSTRUMENTS PRELIMINARY BULLETIN. Models HFM-D-301 & 305, HFC-D-303 & 307
TELEDYNE HASTINGS DIGITAL 300 MEDIUM/HIGH CAPACITY FLOWMETERS AND CONTROLLERS INSTRUMENTS Models HFM-D-301 & 305, HFC-D-303 & 307 FEATURES Flows to 2500 slm (N 2 Equivalent) Accuracy in Nitrogen ±(0.2%
More informationInstallation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker The information in this manual has been carefully checked for accuracy and is intended to be used as a guide for the installation, operation, and
More information5/2014 Supersedes None SPLIT-COUPLED INLINE PUMP WITH INTEGRATED VARIABLE FREQUENCY DRIVE REPLACEMENT PARTS GUIDE TYPE VLSE
SPLIT-COUPLED INLINE PUMP WITH INTEGRATED VARIABLE FREQUENCY DRIVE REPLACEMENT PARTS GUIDE TYPE VLSE This guide is valid for all Grundfos CBS Inc. products beginning with product code 28 only. WhileGrundfos
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description RP2300FC, RP2301FC Router CONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model
More informationInstallation Troubleshooting Maintenance Instructions Installation / Start-up
Model ZW207 Installation Troubleshooting Maintenance Instructions Installation / Start-up NOTE: Flushing of all pipe lines is to be performed to remove all debris prior to installing valve. 1. For making
More informationRBI Solar One-Piece Ground Mount Solution GM-GS
Solar Mounting System Installation Guide RBI Solar One-Piece Ground Mount Solution GM-GS Ballasted Ground Mount System RBI Solar 1292 Logan Circle NW Atlanta, GA 30318 513-618-7240 info@rbisolar.com OVERVIEW
More informationHydraulic Piston Accumulators
Ride Control Engineering Services PWCE Extendavator Paul Wever Construction Equipment Co., Inc. P.O. Box 85 401 Martin Drive Goodfield, IL 61742-0085 Phone (309) 965-2005 Fax (309) 965-2905 1-800-990-PWCE
More informationPDY TON HYDRAULIC CRIMPING TOOL WARNING
OPERATORS ORS GUIDE PDY-1220 12 TON HYDRAULIC CRIMPING TOOL All information found in this guide must be read and understood before use or testing of this tool. Failure to read and understand these warnings
More informationBinks SG-2 Plus TM 2 QT. PRESSURE CUPS Model No (Standard) Model No (with OscillatingAgitator)
INTRODUCTION Binks SG-2 Plus TM Pressure Cup is ideal for component spraying and industrial applications where small batch production spraying is required. The 2 qt. capacity is sufficient to complete
More informationGORSKI G2000SS DIVING HELMET TECHNICAL MANUAL
GORSKI G2000SS DIVING HELMET TECHNICAL MANUAL REVISION 06/11 COPYRIGHT NOTICE This manual is copyrighted, all rights reserved. It may not, in whole or in part, be copied, photocopied, reproduced, translated,
More information35 TON HYDRAULIC PUNCH WARNING
OPERATORS GUIDE REL-35T-PNC 35 TON HYDRAULIC PUNCH NOTICE Sizes, weights and tool specifications listed in this manual are subject to change without notice. Please consult factory for information and updates.
More informationModel Series 62 Constant Differential Relay
Siemens Industry, Inc. INSTALLATION AND SERVICE INSTRUCTION INTRODUCTION Model Series 62 Constant Differential Relay Rev 11 March 2011 Supersedes Rev 10 The Constant Differential Relay maintains a constant
More informationGT20 String Trimmer UT Page 1 of 16 Accessories
GT20 String Trimmer UT-26037 Page 1 of 16 Accessories GT20 String Trimmer UT-26037 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 PS01443 1 TOOL KIT 2 DG07819 1 /P STRAP 3 G07830 1
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More informationPrecision and Instrument Regulators 1/4" port size
Section 8 Precision and Instrument Regulators /" port size Contents -8 Precision Air Pressure Regulator /" ports............ale-8-2 R38 Instrument Regulator Aluminum Model /" ports.........ale-8- -8 R38
More information(1) Type. (2) Tube dia. (ød) : ø8mm (ø5/16in.) (3) Thread size (T) (4) Specification. Fluid medium. Air, water * 1, * 2, * 3 Max. operating pressure
This type of tube fitting comes in eight lengths to suit your applications. The tube fitting, provided with a hexagonal hole, can be easily installed using an Allen wrench, even in a narrow or limited
More informationBuild Your Own Flamethrower Step-by-step Manual
Build Your Own Flamethrower Step-by-step Manual Table of Contents: Parts List.. page 1 Operation...page 6 Diagrams. pages 7-9 Parts list: Required: Air tank (large) Pressure washer gun with high-pressure
More informationHigh Pressure Equipment Taper Seal Valves, Fittings and Tubing
igh quipment Taper Seal Valves, ittings and Tubing 0,000 and,000 psi service igh quipment Company has developed the Taper Seal line of products to assure safe and easy plumbing through,000 psi. These needle
More informationLRS(H)4 Pressure-Reducing Regulator User Manual
LRS(H)4 Pressure-Reducing Regulator User Manual Read the complete manual before installing and using the regulator. 2 Safe Product Selection When selecting a product, the total system design must be considered
More informationATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY
2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 2 of 52 A-ARM, FLOOR PANEL, AND BUMPER
More informationPanoptix PS51-TH FrontVü/LiveVü Thruhull
Panoptix PS51-TH FrontVü/LiveVü Thruhull Transducer Installation Instructions Important Safety Information WARNING See the Important Safety and Product Information guide in the chartplotter or fishfinder
More informationAWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
More informationINSTRUCTIONS PARTS LIST
3066V-E INSTRUCTIONS PARTS LIST INSTRUCTIONS! This manual contains important warnings and information. READ AND KEEP FOR REFERENCE. AQ Poppet Color Valve (3066-41-00A) 304 Stainless Steel Body Autoquip,
More informationData Sheet B-Series Switches Pressure, Differential Pressure & Hydraulic
FEATURES Adjustable setpoints 15-100% of range Fixed or limited adjustable deadband Wide selection of switch elements Explosion proof enclosure provides uncompromising protection Special designs for NACE
More informationRG1200 Service and Repair Manual
Dive Rite RG 1200 Regulator Service and Repair Manual Page 1 Text and Photography by Pete Nawrocky Copyright ( ) 1999-2000, Lamartek, Inc., dba Dive Rite RG1200 Service and Repair Manual First Stage.........................................
More informationSHUR-LOK CORPORATION TECHNICAL SALES BULLETIN
Page 1 of 9 1. SCOPE: 1.1. This provides the minimum design, port preparation and installation and removal requirements for SLAS4383-XX-XX, SLF2002-XX-XX and SLF3004-XX-XX adapter reducer and is applicable
More information