M95 insulation blowing machine Reliability and power in a compact design.

Size: px

Start display at page:

Download "M95 insulation blowing machine Reliability and power in a compact design."

Cori Armstrong
5 years ago
Views:

1 M95 insulation blowing machine Reliability and power in a compact design.

Empfangsteil/Receiver Artikel 5157 Building on an already-successful design Visionary insulation blowing technology Suitable for use with many insulation materials Easy to operate, future orientated

2 Empfangsteil/Receiver Artikel 5157 Building on an already-successful design Visionary insulation blowing technology Suitable for use with many insulation materials Easy to operate, future orientated radio or cable machine control Eicient and powerful, processing speeds of up to 1050 kg/h Can be used in building element manufacture/ bale conditioning systems. Compact and mobile: Tyres facilitate on-site use Reliability and innovation The growing variety of insulation-blowing systems poses new and ever-changing challenges for the machine technology sector. Since its conception in 1995, the M95 Zellofant has been constantly developed and adapted to meet market needs and therefore competently and capably fulfils all current market requirements. The basic machine concept, with the removable hopper and compact machine base form the basis for the machine success. Powerful and wear free drive systems combined with unique control options have ensured the sustainability of its success. The control box contains only reliable, high-quality components. The control circuit and drive motors are eectively protected against overload and shorts circuits. The wiring and arrangement comply with the applicable regulations and are clearly laid out and easy to understand. The operating instructions are easy to understand, even for untrained personnel and facilitate maintenance work. Unique control options The cable or radio remote control enables direct adjustment of all of the important machine parameters direct from the injection point. Clearly structured controls, optical and acoustic warning signals support the user. Additional functions like pressure signalling, dynamic pressure control and automatic shut down further facilitate the insulating process and allow for optimal results to be achieved. Operation of the M95 p 0 Further advantages: Robust construction suitable for site use Versatile and easy to operate control options Dynamic pressure control and automatic pressure limiter Airlock ventilation Radio or cable remote control Tried and tested 2-level vertical agitator Stainless steel rotary airlock High-strength, low-wear rubber washers Clear operating and signalling elements High-powered Large hopper volume Extremely low noise emissions Low maintenance and easy to maintain Good expandibility with modular construction Airlock feed gate for fine material volume control Shredder for highly compacted insulation materials Amplifier station for increased air power Support for bags for ergonomic loading Dust-reducing cover for low-dust filling All blowers protected with check valves Setting-diagramm facilitates selection of the correct setting p 1 Integrated airlock ventilation The material is transported for the airlock rotor to the outlet chamber and blown out from there. The emptied airlock chambers continues to have outlet pressure p 1 and is ventilated on its way back up to the hopper to pressure p 0. The airlock ventilation system increases the eiciency of the airlock and at the same time eectively prevents stirring up of dust in the hopper.

Ergonomic loading: Support for bags for simplified

cover with passive and active dust-extraction for

conjunction with a dust-reducing cover : Future

technology, 4 radio channels, precise setting adjustment

Improved agitator Optional shredder: Improved fibre

Higher processing speeds with conventional insulation

Optimal fine conditioning for spray-on applications.

Optional airlock feed gate: Improved fine adjustment of

Recommended for spray-on applications and cavity wall

3 Ergonomic loading: Support for bags for simplified filling and opening of bagged insulation Dust-reducing cover with passive and active dust-extraction for lowdust filling Shorter hopper can be used in conjunction with a dust-reducing cover : Future orientated radio remote control with bidirectional radio technology, 4 radio channels, precise setting adjustment and robust but lightweight casing. Improved agitator Optional shredder: Improved fibre conditioning for highly compacted materials. Higher processing speeds with conventional insulation materials. Optimal fine conditioning for spray-on applications. Rotating shredder arm breaks the bales into smaller pieces. The replaceable grid only allows small pieces to fall into the rake unit. The rake unit conditions the material ready for blowing. Optional airlock feed gate: Improved fine adjustment of flow volume control and uniform material flow Recommended for spray-on applications and cavity wall insulation Optional amplifier-/vacuum station: Amplification of air power For high conveying heights and long hose lines Suction also possible in conjunction with suction drum Compact machine base: Clearly arranged operating elements Easily accessible connection points Easy maintenance

4 Dust extraction Main body 800 mm 1500 mm A B 450 mm 1425 mm 1245 mm 1800 mm With the dust-reducing cover, amplifier/vacuum station and a suction drum, the operator can work comfortably and waste is considerably reduced. Technical data Model M95-230V/3.6kW M95-2x230V/4.7kW M95-400V/4.7kW M95-400V/6.7kW Material processing speed* kg/h 750 kg/h 850 kg/h 1050 kg/h Electrical connection 230 V~ / 16 A 2 x 230 V~ / 16 A 400 V / 3P / 16 A 400 V / 3P / 16 A Installied air power (adjustable) 2 x 1.2 kw; see character. line 1 2 x 1.6 kw; see character. line 2 2 x 1.6 kw; see character. line 3 3 x 1.6 kw; see character. line 4 Adjust. conveying pressure (max.) 300 mbar 380 mbar 380 mbar 380 mbar Air flow volume (max.) 250 m 3 /h 280 m 3 /h 300 m 3 /h 400 m 3 /h Conveying height* 1 without/with amplifier (max.) Airlock feed gate 25/40 m 30/45 m 30/45 m 35/50 m Adjust. airlock rotational speed Dynamic pressure control Hopper 0.44 m³/approx. 2 bags material * m³/approx. 2 bags material * m³/approx. 2 bags material * m³/approx. 2 bags material * 2 Material conditioning 865 mm 1055 mm 2-level agitator with rotating shredder arm, replaceable grid and rake unit Shredder (optional) (optional) (optional) (optional) Dimensions (Ø x H) 880 x 1500 mm 880 x 1500 mm 880 x 1500 mm 880 x 1500 mm Filling height* mm 1500 mm 1500 mm 1500 mm Airlock outlet Ø NW75 (3") * 3 NW75 (3") * 3 NW75 (3") * 3 NW75 (3") * 3 Unladen weight 155 kg 160 kg 165 kg 185 kg Power rating 3.6 kw 4.7 kw 4.7 kw 6.7 kw 76 mm The standard hopper (A) is well suited to light materials. The optio nal short hopper (B), support for bags (product no. 4791) and dust-reducing cover (product no. 5445) increases working comfort. All values approximate * 1 Depending on material and application * 2 The M95 can also be supplied with a shorter hopper in combination with a dust-reducing cover and a support for bags ( volume: 0.3 m³, filling height:1040 mm) * 3 Reduction to NW63 (2½") or NW50 (2") possible Pressure increase Δp [mbar] Characteristic line 50 Hz Volume flow V L [m3/h] X-Floc Dämmtechnik-Maschinen GmbH Rosine-Starz-Straße Renningen Germany Telephone Fax - 40 info@x-floc.com For prices, see current prices Published We accept no responsibility for errors or changes Download from /download

EIN LUFT EIN Artikel 5157 Empfangsteil/Receiver Artikel 5157 EIN LUFT MATERIAL EIN Innovative remote control for insulation blowing machines

¼¼Integrated rechargeable batteries (NiMH, AAA) The brings the possibilities and advantages of modern digital technology to the insulation

Material input and air power can be adjusted according to the task. Overpressure is reported with optical and acoustic signal.

The is compa tible with our M99-DS-Pro, M95, EM300, EM400/440 and EM500 insulation blowing machines.

However the machine type can be easily changed in the parameter mode.

That means signal validations are interchanged and so assures interference-free operation.

Four radio channels give the opportunity to have parallel operation of several machines.

In the case of flat batteries or interference, the remote can be connected with a cable to control the machine.

5 EIN LUFT EIN Artikel 5157 Empfangsteil/Receiver Artikel 5157 EIN LUFT MATERIAL EIN Innovative remote control for insulation blowing machines ¼¼High transmission security ¼¼Bidirectional digital radio technology ¼¼Precise and individual adjustments ¼¼Light but tough remote control ¼¼Integrated rechargeable batteries (NiMH, AAA) The brings the possibilities and advantages of modern digital technology to the insulation pro. All of the important machine settings for the insulation blowing process can be controlled with the remote control. Material input and air power can be adjusted according to the task. Overpressure is reported with optical and acoustic signal. Depending on the task, dynamic pressure control and automatic deactivation can be employed. The is compa tible with our M99-DS-Pro, M95, EM300, EM400/440 and EM500 insulation blowing machines. It can also be customized for machines from other manufacturers. The remote control is preset to work with our insulation blowing machines. However the machine type can be easily changed in the parameter mode. Transmitter and receiver unit interchange digital signals with bidirectional radio technology. That means signal validations are interchanged and so assures interference-free operation. The receiver only acts upon orders which have been validated. The remote will not send new orders until validation is received. Four radio channels give the opportunity to have parallel operation of several machines. They also give alternatives on building sites with multiple interference sources (cranes or concrete pumps). In the case of flat batteries or interference, the remote can be connected with a cable to control the machine. Δp Empfangsteil/Receiver Bidirectional digital radio technology Compatible with X-Floc and other machines Four radio channels for interferences on building sites Cable connection possible 3x AAA Acoustic alarm for over pressure Standard rechargeable batteries in the remote control For prices, see current price list Published We accept no responsibility for errors or changes. PDF available for download at: /download X-FLOC Dämmtechnik-Maschinen GmbH Rosine-Starz-Straße Renningen Germany Tel Fax - 40

High reach replaceable antenna with BNC bayonet catch Optical signal: Air, material, overpressure and automatic shutdown

performance display / parameter setting display Technical data Transmission frequency 434 MHz Operating temperature range

signal LED (optical) Warning tone (acoustic) Function buttons 6 (foil keypad) Parameter levels 10 Adjustable parameters:

IP class Connections 1-4 0, 1, 2, 9 s 0, 1, 2, 9 s 0, 1, 2, 9 s 50, 100, 500 ms IP40 Cable control Charging jack Antenna 3x

47 x 154 x 47 mm Power supply Weight Dimensions Receiver Protection type IP40 Connections Control line to the machine Cable

83 x 151 x 50 mm Article number 5154 Buttons for air flow rate and parameter setting selection Material input display /

start guide Complete foam lined aluminium case Connection cable optional!

splash-proof Machine connector with twist-lock Charging jack for integrated rechargeable batteries Left: remote control;

6 High reach replaceable antenna with BNC bayonet catch Optical signal: Air, material, overpressure and automatic shutdown Start button with toggle function Protective rims for buttons Button for material- and air stop plus parameter mode Air performance display / parameter setting display Technical data Transmission frequency 434 MHz Operating temperature range -20 C to +40 C Voltage supply 24 V DC Remote Duration of use up to 30 h Range > 100 m without interruption Overpressure signal LED (optical) Warning tone (acoustic) Function buttons 6 (foil keypad) Parameter levels 10 Adjustable parameters: Radio channels Power-on delay material Power-o delay air Delay auto m. shutdown Reaction time dynamic pressure ctrl. IP class Connections 1-4 0, 1, 2, 9 s 0, 1, 2, 9 s 0, 1, 2, 9 s 50, 100, 500 ms IP40 Cable control Charging jack Antenna 3x AAA NiMH 800 mah approx. 400 g approx. 47 x 154 x 47 mm Power supply Weight Dimensions Receiver Protection type IP40 Connections Control line to the machine Cable control Antenna Power supply 24 V DC (insulation blowing machine) Weight approx. 765 g Dimensions approx. 83 x 151 x 50 mm Article number 5154 Buttons for air flow rate and parameter setting selection Material input display / parameter setting display Contents One remote with carrying strap One charger One receiver with magnet Two antennas Quick start guide Complete foam lined aluminium case Connection cable optional! Buttons material feed amount and parameter value Strong magnet for flexible fastening Tough metal body: Dust-proof and splash-proof Machine connector with twist-lock Charging jack for integrated rechargeable batteries Left: remote control; right: receiver Connection for cable mode with quick-lock system For prices, see current price list Published We accept no responsibility for errors or changes. PDF available for download at: /download X-FLOC Dämmtechnik-Maschinen GmbH Rosine-Starz-Straße Renningen Germany Tel Fax - 40

Multi Fibres. MiniFant M99 insulation blowing MacHinE

Multi Fibres. MiniFant M99 insulation blowing MacHinE Multi Fibres MiniFant M99 insulation blowing MacHinE the compact professional blowing machine standard option the Minifant M99 is a compact yet powerful insulation blowing machine. the M99 is suitable