Single and double acting, magnetic, self-centering Bores: ø 16, 20, 25, 32, 40 mm
|
|
|
- Kristina Wilkerson
- 5 years ago
- Views:
Transcription
1 > Series CGPT self-centering parallel grippers with T-guide Series CGPT self-centering parallel grippers with T-guide Single and double acting, magnetic, self-centering Bores: ø 6, 20, 25, 32, 40 mm New Thanks to the use of a high performing and precise force transmission system, the Series CGPT grippers are able to provide high gripping forces while guaranteeing a very high repeatability. The wide range of sizes available allows you to find the best solution for any need of movement. The grippers are supplied with centering bushes (tolerance H8) which, once positioned on the body and/or on the jaws, are able to guarantee, during maintenance, a high interchangeability of the gripper and of the extensions. Robust, compact and light design High closing/opening forces Fixing from the top, from below and from the side Supply on the side or on the bottom (even without using tubes) Self-centering jaws High closing and opening repeatability High interchangeability (centering bushes) Position detection thanks to the use of magnetic proximity switches. In compliance with ROHS directive PTFE, Silicone and Copper free High reliability High resistance to external loads thanks to the T-guide Variants available for use in ATEX zones and for high temperatures GENERAL DATA Type of construction Operation Bores Force transmission Air connections pressure temperature Store temperature Self-centering parallel gripper with T-guide Single acting (NO, NC), double acting Ø6, 20, 25, 32, 40 mm Lever M3 (Ø6), M5 (Ø20, 25, 32), G/8 (Ø40) 2 8 bar (double acting), 4 8 bar (single acting) 5 C 60 C (standard) - 5 C 50 C (high temperature version) -0 C 80 C Maximum use frequency 3 Hz (ø 6, 20, 25, 32), 2 Hz (ø 40) Repeatability Interchangeability Medium Lubrication Protection class Compatibility Certifications Materials 0.02 mm 0. mm Filtered air in class according to ISO In case lubricated air is used, we recommend ISOVG32 oil and to never interrupt lubrication. After 0 million cycles, grease the sliding zones using Molykote DX grease. IP 40 ROHS Directive ATEX (II 2GD c IIC 20 C(T4)-20 C Ta 80) PTFE, Silicone and Copper free N.B. Pressurize the pneumatic system gradually in order to avoid uncontrolled movements /7.7.0
2 > Series CGPT self-centering parallel grippers with T-guide CODING EXAMPLE CGPT NC - W EX CGPT SERIES 6 NC W EX BORES: 0 = ø 0 mm 6 = ø 6 mm 20 = ø 20 mm 25 = ø 25 mm 32 = ø 32 mm 40 = ø 40 mm FUNCTIONING: = double acting NO = single acting, normally open NC = single acting, normally closed VERSION: = standard W = high temperatures (50 C) - not magnetic Add EX to order the certified ATEX version PNEUMATIC SYMBOLS PNZ PNZ3 PNZ2 PNEUMATIC SYMBOLS The pneumatic symbols which have been indicated in the CODING EXAMPLE are shown below. Maximum admissible loads and torques Fz s, Mx s, My s, Mz s = maximum admissible loads and torques in static conditions Fz d, Mx d, My d, Mz d = maximum admissible loads and torques in dynamic conditions Fz s (N) Mx s (Nm) My s (Nm) Mz s (Nm) Fz d (N) Mx d (Nm) My d (Nm) Mz d (Nm) CGPT CGPT CGPT CGPT CGPT /7.7.02
3 > Series CGPT self-centering parallel grippers with T-guide Series CGPT grippers - construction LIST OF COMPONENTS PARTS MATERIALS - Body Aluminium 2 - Jaw Stainless steel 3 - Piston Stainless steel 4 - Seals HNBR / FKM 5 - Centering bushes Stainless steel 6 - Levers Steel 7 - End cover Aluminium 8 - Spring Stainless steel 9 - Magnet Neodymium 0 - Cover Stainless steel /7.7.03
4 > Series CGPT self-centering parallel grippers with T-guide CGPT gripper, size 6 mm - dimensions DRAWING LEGEND: A = Opening of air connection B = Closing of air connection C = Closed gripper D = Open gripper Closing gripping force Opening gripping force Stroke per jaw (mm) Air consumption per cycle (Ncm³) pressure (bar) temperature ( C) Repeatability (mm) Max use frequency (Hz) CGPT CGPT-6-NC (single-acting), 9 (double-acting) CGPT-6-NO (single-acting), 9 (double-acting) Weight (Kg) /7.7.04
5 > Series CGPT self-centering parallel grippers with T-guide CGPT gripper, size 20 mm - dimensions DRAWING LEGEND: A = Opening of air connection B = Closing of air connection C = Closed gripper D = Open gripper Closing gripping force Opening gripping force Stroke per jaw (mm) Air consumption per cycle (Ncm³) pressure (bar) temperature ( C) Repeatability (mm) Max use frequency (Hz) CGPT CGPT-20-NC (single-acting), 20 (double-acting) CGPT-20-NO (single-acting), 20 (double-acting) Weight (Kg) /7.7.05
6 > Series CGPT self-centering parallel grippers with T-guide CGPT gripper, size 25 mm - dimensions DRAWING LEGEND: A = Opening of air connection B = Closing of air connection C = Closed gripper D = Open gripper Closing gripping force Opening gripping force Stroke per jaw (mm) Air consumption per cycle (Ncm³) pressure (bar) temperature ( C) Repeatability (mm) Max use frequency (Hz) CGPT CGPT-25-NC (single-acting), 45 (double-acting) CGPT-25-NO (single-acting), 45 (double-acting) Weight (Kg) /7.7.06
7 > Series CGPT self-centering parallel grippers with T-guide CGPT gripper, size 32 mm - dimensions DRAWING LEGEND: A = Opening of air connection B = Closing of air connection C = Closed gripper D = Open gripper Closing gripping force Opening gripping force Stroke per jaw (mm) Air consumption per cycle (Ncm³) pressure (bar) temperature ( C) Repeatability (mm) Max use frequency (Hz) CGPT CGPT-32-NC (single-acting), 0 (double-acting) CGPT-32-NO (single-acting), 0 (double-acting) Weight (Kg) /7.7.07
8 > Series CGPT self-centering parallel grippers with T-guide CGPT gripper, size 40 mm - dimensions DRAWING LEGEND: A = Opening of air connection B = Closing of air connection C = Closed gripper D = Open gripper Closing gripping force Opening gripping force Stroke per jaw (mm) Air consumption per cycle (Ncm³) pressure (bar) temperature ( C) Repeatability (mm) Max use frequency (Hz) CGPT CGPT-40-NC (single-acting), 202 (double-acting) CGPT-40-NO (single-acting), 202 (double-acting) Weight (Kg) /7.7.08
9 > Series CGPT self-centering parallel grippers with T-guide GRIPPING FORCE (Fc) PER SINGLE JAW The total gripping force has to be calculated as follows: Total Fc = Fc x 2 Gripping force in relation to the lever arm (R) and the eccentricity (b, e) R = (b² + e²) CGPT-6 R = lever arm Fc = closing gripping force Fa (opening gripping force) = Fc + 0% CGPT-20 R = lever arm Fc = closing gripping force Fa (opening gripping force) = Fc + 0% CGPT-25 R = lever arm Fc = closing gripping force Fa (opening gripping force) = Fc + 0% /7.7.09
10 > Series CGPT self-centering parallel grippers with T-guide GRIPPING FORCE (Fc) PER SINGLE JAW CGPT-32 R = lever arm Fc = closing gripping force Fa (opening gripping force) = Fc + 0% CGPT-40 R = lever arm Fc = closing gripping force Fa (opening gripping force) = Fc + 0% /7.7.0
11 > Series CGPT self-centering parallel grippers with T-guide Examples of mounting A B C D E F CGPT-6 Ø5 M3 M2.5 M2.5 Ø4 M2.5 CGPT-20 Ø6 M4 M3 M3 Ø5 M3 CGPT-25 Ø8 M5 M4 M4 Ø6 M4 CGPT-32 Ø8 M5 M4 M5 Ø8 M5 CGPT-40 Ø0 M6 M5 M6 Ø0 M6 /7.7.
12 > Series CGPT self-centering parallel grippers with T-guide Air supply ports G H I CGPT-6 M3 M2 OR x2.5 CGPT-20 M5 M2 OR x2.5 CGPT-25 M5 M2 OR x2.5 CGPT-32 M5 M3 OR x3.5 CGPT-40 G/8 M3 OR x3.5 Example of use of the pressurization/lubrication hole Example of use of the lubrication (greasing) or pressurization hole of the zone with moving items NOTE : grease the sliding zones using Molykote DX grease. NOTE 2: supply a pressure of max. 3 bar in order to avoid the sudden ejection of grease. CGPT-6 CGPT-20 CGPT-25 CGPT-32 CGPT-40 X M3 M5 M5 M5 M5 Example of mounting: sensors L = sensor mod. CSD-332 or mod. CSD-362 In order to position the sensor correctly, a channel must be created in the base. CGPT-6 CGPT-20 CGPT-25 CGPT-32 CGPT-40 /7.7.2
13 > Series CGPT self-centering parallel grippers with T-guide Series CSD magnetic proximity switches with 3-wire cable Operation Connections Voltage Output Max. current Max Load Protection L = length cable CSD-332 Electronic 3 wires 0 27 V DC PNP 200 ma 6W Against polarity reversing and overvoltage 2 m Series CSD magnetic proximity switches with male connector M8 Length of cable 0.3 metres Operation Connection Voltage Output Max. current Max load Protection CSD-362 Electronic 3 wires with M8 connector 0 27 V DC PNP 200 ma 6W Against polarity reversing and overvoltage /7.7.3
Series CGZT three-jaw grippers with T-guide
Series CGZT three-jaw grippers with T-guide New Single and double acting, magnetic, self-centering Sizes: 40, 50, 64, 80, 100, 125, 160 mm The new Series CGZT pneumatic grippers, thanks to the use of a
Series CGCN self-centering three-jaw grippers with T-guide
HANDLING AND VACUUM 2019 GRIPPERS > Series CGCN self-centering three-jaw grippers with T-guide New Double acting, magnetic Sizes: 50, 64, 80, 100, 125 mm The new Series CGCN pneumatic grippers are available
Reliability and flexibility in a compact design
Catalogue Handling Reliability and flexibility in a compact design Modern industrial processes are now characterized by an ever increasing amount of automation. Where very high performance is required,
2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES SZ)
2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES ) Double-acting. Spring closed (upon request). Patented self-centering system. Multiple mounting and porting options. Optional magnetic sensors.
2-jaw self-centering pneumatic parallel gripper (series SX)
SX 2-jaw self-centering pneumatic parallel gripper (series SX) Double acting (normally closed on request). High gripping force. Protection class: IP67. Double O-Ring sealing on the columns. Suitable for
2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES HS)
HS 2-JAW SELF-CENTERING PARALLEL PNEUMATIC GRIPPER (SERIES HS) Designed for high-speed machines. Very short closing/opening times. Lightweight. Maintenance-free long life and reliability. Long stroke.
GX-S. 2-jaw self centering radial pneumatic gripper (series GX-S) GX-S
GX-S 2-jaw self centering radial pneumatic gripper (series GX-S) Double acting. Very high gripping force at the end of the stroke. Long life and reliability, maintenance free. Various options for fastening.
Bores: ø 10, 16, 20, 25, 32 mm
> Series CGLN wide opening parallel grippers CATALOGUE > Release 8.8 Series CGLN wide opening parallel grippers New version Bores: ø 0, 6, 20, 25, 32 mm»» High installation versatility»» Rack and pinion
Filtered compressed air, lubricated or non-lubricated. Maximum torque on each jaw on opening at 87 psi 3.1 in-lbf 10.6 in-lbf 20.
2-JAW SELF-CENTERING RADIAL PNEUMATIC GRIPPER (SERIES ) Double-acting. High gripping force at the end of the stroke. Maintenance-free long life and reliability. Various options for fastening. Optional
Wide opening parallel grippers Series CGLN
CATALOGUE > s 202 Wide opening parallel grippers Series CGLN > Grippers Series CGLN Magnetic Sizes: ø 0-6 - 20-25 - 32 mm» High flexibility during mounting» High grip force» Rack and pinion synchronized
Description Total stroke Maximum Recommended Page in mm gripping force in N workpiece weight in kg
Overview parallel gripper Description Total stroke Maximum Recommended Page in mm gripping force in N workpiece weight in kg Version 1 2 1 2 1 2 RRP-A 64 12 6 240 450 1,2 2,2 26 80 16 8 380 700 1.9 3.5
PRP. Pneumatic parallel gripper with rotator PRP
PRP Pneumatic parallel gripper with rotator Compatible with the G-mix system. Selectable rotation angle. Gripper with integrated rotator: the four sensors and the four hoses do not rotate. Optional magnetic
GS - Parallel Gripper
11: Double acting Patented backlash adjusting system. Long life and reliability, maintenance free. Different options for fastening. Optional magnetic sensors available on page 517. Spring closed (-NC)
Double Acting Models Part# GW-10 GW-16 GW-20 GW-25 Quick# Price $95.00 $ $ $ Medium
11: Double acting Long life and reliability, maintenance free. Different options for fastening. Optional proximity magnetic sensors available on page 527. Spring closed (-NC) or spring open (-NO) option.
PWG-S. Application example. Pneumatic 2-Finger Angular Gripper Universal Gripper. Sizes. Gripping moment 5.98 Nm Nm. Weight 0.21 kg 1.
PWG-S Sizes 40 80 Weight 0.21 kg 1.2 kg Gripping moment 5.98 Nm 50.82 Nm Angle per jaw 20 Workpiece weight 1.1 kg 4.8 kg Application example Rotating/gripping combination for flexible handling of sheet
GRIPPERS SERIES P3 - P12 ACTUATORS
GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Aluminum
LGP. Application example. Pneumatic 2-Finger Parallel Gripper Universal Gripper. Sizes. Gripping force 26 N 1090 N. Weight 0.03 kg 1.
LGP Sizes 8 4 Weight.3 kg 1.6 kg 26 N 19 N Stroke per finger 2 mm 13 mm Workpiece weight.13 kg 4.2 kg Application example Pneumatic double transfer unit 2-Finger Parallel Gripper LGP Universal Rotary Actuator
MPRM1690 MPRM2590 MPRM3290
Pinze elettriche radiali a 2 griffe 2-jaw radial electric grippers MPRM 2-jaw radial self-centering electric gripper Plug & play user friendly gripper. No electricity consumption when gripper is engaged.
LGR. Application example. Pneumatic 2-Finger Radial Gripper Universal Gripper. Sizes. Gripping moment 0.3 Nm 15 Nm. Weight 0.07 kg 1.
LGR Sizes 10 40 Weight 0.07 kg 1.27 kg Gripping moment 0.3 Nm 15 Nm Angle per jaw 90 Workpiece weight 0.07 kg 1066 kg Application example Rotational adjustment for reorientation of workpieces 2-Finger
Micro grippers HGPM/HGWM
HGPM/HGWM Miniaturised and optimised for assembly tasks Versatile 2004/10 Subject to change Products 2004/2005 1 / 1 HGPM/HGWM Key features HGWM HGPM 1 2 3 4 1 2 3 4 System product for handling and assembly
LGZ. Application example. Pneumatic 3-Finger Centric Gripper Universal Gripper. Sizes. Gripping force 120 N 1470 N. Weight 0.1 kg 0.
LGZ Sizes 16 5 Weight.1 kg.99 kg 12 N 147 N Stroke per finger 3 mm 7 mm Workpiece weight.6 kg 5.7 kg Application example Pneumatic transfer unit for round components 3-Finger Centric Gripper LGZ Linear
PFH. Application example. Pneumatic 2-Finger Parallel Gripper Long-stroke Gripper. Weight 2.65 kg 12.6 kg. Gripping force 630 N 2950 N
PFH www.comoso.com Sizes 30 50 Weight 2.65 kg 12.6 kg Gripping force 630 N 2950 N Stroke per finger 30 mm 100 mm Workpiece weight 3.15 kg 13 kg Application example Assembly unit for intermediate sleeves
MPG-plus. Application example. Pneumatic 2-Finger Parallel Gripper Gripper for small components. Gripping force 38 N 175 N. Sizes
MPG-plus Sizes 25 40 Weight 0.06 kg 0.24 kg Gripping force 38 N 175 N Stroke per finger 3 mm 6 mm Workpiece weight 0.19 kg 0.7 kg Application example Pneumatically driven, dual-axis pick-and-place machine
2-JAW PARALLEL GRIPPERS INSTALLATION SIZE GPP5006IL
2-JAW PARALLEL GRIPPER INTALLATION IZE GPP006IL PRODUCT PECIFICATION Gripping force diagram Forces and moments Displays static forces and moments that can also have an effect, besides the gripping force.
3-JAW CONCENTRIC GRIPPERS INSTALLATION SIZE GPD5006IL
3-JAW CONCENTRIC GRIPPER INTALLATION IZE GPD006IL PRODUCT PECIFICATION Gripping force diagram Forces and moments Displays static forces and moments that can also have an effect, besides the gripping force.
Parallel grippers HGPM, micro
Key features G6: G8: G9: stroke compensation clamping spigot flange mounting At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable gripper fingers
SPG. Application example. Pneumatic 2-Finger Parallel Gripper Heavy-load Gripper. Weight 35 kg. Stroke per finger 100 mm.
SPG Size 100 Weight 35 kg 10,000 N Stroke per finger 100 mm Workpiece weight 50 kg Application example Gripper unit for heavy V8 engine blocks. SPG 100 2-Finger Heavy-load Gripper 446 www.schunk.com SPG
Heavy-duty three-point grippers HGDT
Key features At a glance The force generated by the linear motion is translated into the gripper jaw movement via a force-guided triple wedge mechanism. This also guarantees synchronous movement of the
Hand lever valves VHER
Hand lever valves VHER Hand lever valves VHER Key features Powerful Flexible Practical -M- Flow 170 3800 l/min 4/3-way valve mid-position closed mid-position exhausted mid-position pressurised Connections:
![[Instruments for vacuum measurement, checking and adjustment] 3](/thumbs/94/121874202.jpg "[Instruments for vacuum measurement, checking and adjustment] 3")
Proportional pressure regulators VPPE
Proportional pressure regulators VPPE Proportional pressure regulators VPPE Product range overview Function Version Pneumatic connection Proportional pressure regulator Nominal size for pressurisation/
Gripping modules Pneumatic 2-finger parallel gripper Long-stroke gripper for small components Gripping force 120 N..
GM Sizes 85.. 205 Mass 0.48 kg.. 2.7 kg 120 N.. 595 N Stroke per finger 16 mm.. 30 mm Workpiece weight, force-fit gripping Up to 2.3 kg Application example 3 5 3 4 2 5 2 1 1 Pneumatic double pick & place
PFH. Application example. Pneumatic 2-Finger Parallel Grippers Long-stroke Grippers. Sizes Gripping force 510 N N
PFH Sizes 30.. 50 Weight 2.65 kg.. 9.7 kg Gripping force 510 N.. 2650 N Stroke per finger 30 mm.. 50 mm Workpiece weight 2.55 kg.. 11.5 kg Application example Assembly unit for intermediate sleeves in
Product Information. Gripper for small components MPC
Product Information MPC MPC Easy. Economical. Cost-effective. MPC Easily built up 2-finger parallel gripper with good price-performance ratio Field of application Gripping of small to mid-sized workpieces
LGP Pneumatic 2-Finger Parallel Gripper Universal Gripper Sizes Weight Gripping force Stroke per finger Workpiece weight
LGP Sizes 8.. 4 Weight.34 kg.. 1.5 kg 27 N.. 19 N Stroke per finger 2 mm.. 13 mm Workpiece weight.65 kg.. 2.5 kg Application example pneumatic double transfer unit 2-Finger Parallel Gripper LGP 2 Universal
Position locking powerful chuck. CKL2-*-HC Series CKL2-40CS-HC CKL2-50CS-HC CKL2-63CS-HC CKL2-80CS-HC Compressed air to
RV* FH1 G G B FH Specifications Descriptions Cylinder bore size Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke length Rod diameter Capacity of
1Robust, lightweight housing - hard coated aluminium alloy. 2Energy supply - air connection available on several sides
3-Jaw Concentric eries GD3 pneumatic Product information: Extremely robust T-lot guide for maximum forces and moments capacity Gripper jaws made of ground surfaced and hardened steel ensuring long lasting
RG2 Gripper Datasheet Version 1.6
RG2 Gripper Datasheet Version 1.6 The RG2 gripper is a flexible electric gripper specially designed for robots from Universal Robots. The long stroke allows the gripper to handle a variety of object sizes.
FIPA End-of-Arm-Tooling
213.GR6-ER English February 213 FIPA End-of-Arm-Tooling Addendum Version 1 www.fi pa.com Editorial Only those who think ahead stay ahead Competence End-of-Arm-Tooling Based in Ismaning near Munich, FIPA
PSH. Application example. Pneumatic 2-Finger Parallel Gripper Long-stroke Gripper. Stroke per finger 14 mm.. 64 mm. Sizes
PSH Sizes 22.. 52 Weight 0.77 kg.. 8.05 kg 320 N.. 1760 N Stroke per finger 14 mm.. 64 mm Workpiece weight 1.60 kg.. 8.80 kg Application example Rapid loading and unloading unit on a swivel head base.
G R I P P E R S English edition 10/2012
GRIPPERS English edition 10/2012 76 GRIPPERS CONTENTS PRECISION PARALLEL GRIPPERS 78-93 PRECISION PARALLEL MINI GRIPPERS 96 109 UNIVERSAL PARALLEL GRIPPERS 112 121 LONG-STROKE GRIPPERS 122 131 77 UNIVERSAL
PZN-plus. Application example. Pneumatic 3-Finger Centric Gripper Universal Gripper. Sizes. Gripping force 255 N N. Weight 0.
PZN-plus Sizes 40 300 Weight 0.13 kg 46 kg Gripping force 255 N 35500 N Stroke per finger 2 mm 35 mm Workpiece weight 1.3 kg 127.5 kg Application example Insertion tool for assembling small to mediumsized
PSH (inch version) Application example. Pneumatic 2-Finger Parallel Grippers Long-stroke Grippers. Stroke per finger 14 mm.. 64 mm. Sizes 22..
PSH (inch version) Sizes 22.. 52 Weight 0.77 kg.. 8.05 kg Gripping force 320 N.. 1760 N Stroke per finger 14 mm.. 64 mm Workpiece weight 1.60 kg.. 8.80 kg Application example Rapid loading and unloading
Parallel grippers HGPM, micro
Key features G6: G8: G9: with stroke compensation with clamping spigot with flange mounting At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable
Product Information. Gripper for small components MPG-plus 16
Product Information MPG-plus 16 MPG-plus More powerful. Faster. Longer fingers. MPG-plus gripper for small components 2-finger parallel gripper with smooth roller guides of the base jaws Field of application
DPZ-plus. Application example. Pneumatic 3-Finger Centric Grippers Sealed Grippers. Gripping force 520 N N. Sizes
DPZ-plus Sizes 64.. 200 Weight 0.62 kg.. 20.1 kg Gripping force 520 N.. 16800 N Stroke per finger 3 mm.. 25 mm Workpiece weight 2.6 kg.. 60.0 kg Application example Insertion tool for assembling small
SWG. Application example. Pneumatic 2-Finger Angular Gripper Angular Gripper for Small Components. Sizes Gripping moment 0.01 Nm.. 2.
SWG Sizes 10.. 50 Weight 2.5 g.. 213 g Gripping moment 0.01 Nm.. 2.8 Nm Opening angle per finger 15 Workpiece weight 0.007 kg.. 0.45 kg Application example Triple transfer unit for packaging with small
4/2 way Pneumatic Solenoid Valve
4/2 way Pneumatic Solenoid Valve Compact design Push-over solenoid coil Exhaust air can be regulated Tube, threaded and sub-base connections Type combined with Seat valve version Type 2508 Type 2510/11
compact ejector, Series ECM with Adjustable release pulse with silencer With filter vacuum switch: electronic 2 x PNP
00134428 Type Miniature compact injector Ambient temperature min./max. +0 C / +0 C Medium temperature min./max. +0 C / +0 C Working pressure min./max. 2. bar / 6 bar Medium Compressed air Max. particle
Cost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
Pneumatic Grippers Swivel Modules
Pneumatic Grippers Swivel Modules Pneumatic Grippers Swivel Modules ROTARY GRIPPERS MODULES Series Size Page GSM 748 Parallel Grippers GSM-P 750 GSM-P 32 754 GSM-P 40 760 GSM-P 50 766 GSM-P 64 772 Centric
Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC
Mechatronic pressure measurement Compact differential pressure switch Flameproof enclosure Ex d Models DE, DEC WIKA data sheet PV 35.41 Process Compact Series Applications Differential pressure monitoring
SOLENOID VALVES AND PNEUMATIC VALVES
9 S E R I E S Electropneumatically and pneumatically operated valves Series 9 Assembly with sub-base (ISO 5599/1 Standards) Sizes 1, 2 and 3 The Series 9 electropneumatically or pneumatically operated
Angle grippers HGWM, micro
Key features G6: G7: G8: with stroke compensation with male thread with clamping spigot At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable gripper
Prewired position switches FA series
2 Prewired position switches FA series Selection diagram 01 08 10 11 1 15 1 02 external rubber gasket external rubber gasket 1 51 52 54 55 56 5 ACTUATORS adjustable lever safety adjustable lever 41 45
Gripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
Position switches FP series
A Position switches FP series Selection diagram 0 08 8 9 0 0 0 Ø 8 mm Ø, mm external rubber stainless steel stainless steel fiber glass rod gasket sphere sphere adjustable lever safety adjustable lever
CKL2 Series. Powerful chuck. Operational stroke length: 5, 6, 8, 10, 12, 16, 20, 23mm. Specifications. Switch specifications
RV* FH1 G B FH G A S Specifications Descriptions Size Cylinder bore size mm Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm
Dimensions. Technical Data General specifications Switching element function Rated operating distance s n 5 mm
Dimensions M18x1 37 40 4 0102 24 LED Model Number Features 5 mm embeddable Usable up to SIL2 acc. to IEC 61508 Connection BN BU Accessories L+ L- EXG-18 Quick mounting bracket with dead stop BF 18 Mounting
Proportional Throttle Cartridges, Size 16
Proportional Throttle Cartridges, Size 16 Q max = 5 l/min, p max = 5 bar, Q N max = 14 l/min at p 1 bar Two-Stage, with Seat-Valve Shut-Off 1 Description Normally closed Seat-valve shut-off from 1 Compact
Sizes Weight Gripping force Stroke per finger Workpiece weight Pieces : kg N mm kg
MPG-plus Sizes Weight Gripping force Stroke per finger Workpiece weight Pieces : 7 0.06.. 0.63 kg 25.. 350 N 1.5.. 10 mm 0.19.. 1.25 kg Application example Pneumatically driven, dual-axis pick-andplace
PGN-plus. Universal Gripper Universal 2-finger parallel gripper with large gripping force and high maximum moments thanks to multi-tooth guidance.
PGN-plus Sizes 40 380 Weight 0.08 kg 39.5 kg Gripping force 123 N 21150 N Stroke per finger 2 mm 45 mm Workpiece weight 0.62 kg 80.5 kg Application example Pick-and-place unit for light to medium-weight
DMK 458. Pressure Transmitter for Marine and Offshore. Ceramic Sensor. accuracy according to IEC 60770: standard: 0.25 % FSO option: 0.
Pressure Transmitter for Marine and Offshore Ceramic Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0. % FSO Nominal pressure from 0... 40 mbar up to 0... 0 bar Output signals -wire:
Technical Data. General specifications Switching element function DC Dual NC Rated operating distance s n 3 mm. Short-circuit protection
0102 Model Number Features Direct mounting on standard actuators Compact and stable housing Fixed setting EC-Type Examination Certificate TÜV99 ATEX 1479X Usable up to SIL2 acc. to IEC 61508 Accessories
GWB Pneumatic 2-Finger Radial Gripper Universal Gripper Sizes Weight Gripping moment Opening angle per finger Workpiece weight
GWB Sizes 34.. 100 Weight 0.14 kg.. 3.5 kg Gripping moment 2.1 Nm.. 127 Nm Opening angle per finger 10.. 90 Workpiece weight 0.3 kg.. 6.0 kg Application example Rotating/gripping combination for handling
INFORMATION SHEET: SERIES GRC PARALLEL GRIPPERS
INFORMATION SHEET: SERIES GRC PARALLEL S IMPORTANT INFORMATION DO NOT DISCARD! Use this formation sheet to assist with gripper stallation and setup. File with matenance or mache documentation. TO ORDER
Product Information. Gripper for small components MPG 20
Product Information MPG 20 MPG Precise. Compact. Reliable. MPG gripper for small components 2-finger parallel gripper with smooth roller guides of the base jaws Field of application Gripping and moving
Product Information. Sealed universal gripper DPG-plus 100
Product Information 100 Reliable. Fully encapsulated. Loadable. Sealed gripper Despite the high moment load of the base jaws, this sealed 2-finger parallel gripper meets the IP67 requirements, and does
Technical Data. Dimensions
0102 Model Number Features 2 mm flush Usable up to SIL2 acc. to IEC 61508 Technical Data specifications Switching element function NAMUR, NC Rated operating distance s n 2 mm Installation flush Output
OPTIBAR P 1010 C Technical Datasheet
Technical Datasheet Pressure transmitter with recessed diaphragm for general applications Wide variety thanks to modular design Measuring ranges up to 250 bar / 3750 psi High overload and temperature stability
filtered air without lubricant. If lubricated air is used, it is recommended to use ISOVG32 oil and to never interrupt lubrication.
> Series EN valves and solenoid valves Valves and Solenoid valves Series EN, CC - CO - CP With outlets on the body - For individual or manifold assembly Size 16-19 mm» Mounting on any flat surface» Reduced
PZN-plus. Application example. Pneumatic 3-Finger Centric Gripper Universal Gripper. Sizes Gripping force 580 N..
PZN-plus Sizes 40.. 300 Weight 0.43 kg.. 43.5 kg Gripping force 580 N.. 38000 N Stroke per finger 3 mm.. 35 mm Workpiece weight 2.9 kg.. 190 kg Application example Insertion tool for assembling small to
PGN. Application example. Pneumatic 2-Finger Parallel Grippers Universal Grippers. Gripping force 100 N N. Sizes
PGN Sizes 50.. 380 Weight 0.125 kg.. 28.0 kg Gripping force 100 N.. 15100 N Stroke per finger 2 mm.. 45 mm Force-fit gripping 0.5 kg.. 75.0 kg Application example Horizontal turning station with 180 reorientation
Technical Data. Dimensions
00 Model Number Features mm flush Usable up to SIL acc. to IEC 6508 Accessories V-G Female connector, M, -pin, field attachable V-W Female connector, M, -pin, field attachable V-G-N-M-PUR Female cordset,
Dimensions. Technical Data General specifications Switching element function DC Dual NC Rated operating distance s n 3 mm
Dimensions 65 GW2 40 35 9 5 GW1 14 11 9 5.4 M20 x 1.5 0102 Model Number S M12 x 1.5 Features 77.5 LED V Direct mounting on standard actuators Compact and stable housing with terminal compartment connection
C-Flow Coriolis Mass Flow Meters
Coriolis Mass Flow Meters Ready for Take Off The New Compact C-Flow Küppers Elektromechanik GmbH The C-Flow The C-Flow Coriolis Mass Meters consist of two components: KCE Transmitter KCM Transducer 2 KEM
Product Information. Gripper for small components RH 905
Product Information RH 905 RH cost-effective. Easy. Economical. RH gripper for small components The RH series is a cost-efficient gripping system, which is particularly suitable for simple cases of application.
Inverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 35 bar Direct acting, electrically operated Description Compact construction for cavity type AL 3/-6 UNF Operated by a proportional
ORG. Application example. Special Grippers O-ring Assembly Gripper. Weight 1.35 kg. Ring diameter O.D. Assembly appr.ø 5 mm.. ø 160 mm.
Sizes 85 Weight 1.35 kg Ring diameter O.D. Assembly appr.ø 5 mm.. ø 160 mm Ring diameter I.D. Assembly appr. ø 10 mm.. ø 120 mm Application example Automatic machine for the internal or external assembly
Technical Data. General specifications Switching element function Rated operating distance s n 5 mm
00 Model Number Features 5 mm flush Usable up to SIL acc. to IEC 6508 Accessories V-G Female connector, M, -pin, field attachable V-W Female connector, M, -pin, field attachable V-G-N-M-PUR Female cordset,
UNIK 5600/5700 Marine Certified Pressure Sensing Platform
GE Measurement & Control UNIK 5600/5700 Marine Certified Pressure Sensing Platform The new UNIK 5600/5700 carries marine certification for most zones on-board ship, as well as Intrinsically Safe certifications.
Prewired position switches FA series
Prewired position switches Technical data Housing Made of metal, coated with baked epoxy powder 2 m wired cable with 5x0,5 mm 2 wires marked SEV and IMQ Protection degree: IP6 General data Ambient temperature:
G1/8 G1/8. Model 0 bar -0,1 bar -0,2 bar -0,3 bar -0,4 bar -0,5 bar -0,6 bar -0,7 bar -0,8 bar
single stage pumps M/5811 Very high induced air capacity % lower air consumption than comparable single stage units No wearing parts Compatible with a wide range of line contaminants llows direct connection
Electropneumatic Positioner and Pneumatic Positioner Type 3760 JIS
Electropneumatic Positioner and Pneumatic Positioner Type 3760 Application Single-acting positioners for direct attachment to pneumatic control valves. Supplied with an electric input signal of 4 to 20
pneumatic power clamps
pneumatic power clamps Features Király Trading KFT H-1151 Budapest Mogyoród útja 12-14 E-mail:_agi@kiralytrading.hu Your requirements Power element of machines, tools and devices for the following applications:
Technical Data. Dimensions
0102 Model Number Features Comfort series 15 mm flush Accessories MHW 01 Modular mounting bracket MH 04-2057B Mounting aid for VariKont and +U1+ V1-G-N-2M-PUR Female cordset, M12, 2-pin, NAMUR, PUR cable
MECAIR CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS PRODUCT LEAFLET
CSN RAINTIGHT ENCLOSURE CLEAN AIR SOLUTIONS GENERAL CHARACTERISTICS CONSTRUCTION FEATURES ENCLOSURE OPERATING TEMPERATURE 20 C/+60 C COVER Diecast aluminium (anodised) WEIGHT CSN 5 3.5 kg CSN 8 5 kg CSN
Level switches Series LD Vibrating fork level switch for liquids and solids
Level switches Series LD Vibrating fork level switch for liquids and solids Robust and compact Suitable for liquids (model LD61) and solids (model LD60) No moving parts, low maintenance Corrosion resistant
Diaphragm pressure switches, 42 V
0166 Diaphragm pressure switches, 42 V Zinc-plated steel body With push-on terminals Overpressure safe to 300 bar *) 0166 Diaphragm pressure switches Adjustment range Thread Normally open (no) : Normally
Dimensions. Technical Data General specifications Switching element function Rated operating distance s n 10 mm
Dimensions M30x1,5 5 40 37 0102 Model Number 36 LED Features Comfort series 10 mm embeddable Connection BN BU Accessories BF 30 Mounting flange, 30 mm L+ L- Technical Data specifications Switching element
Inverse Proportional Pressure-Relief Cart., Size 2 4
Inverse Proportional Pressure-Relief Cart., Size Q max = l/min, p max = 5 bar Direct acting, electrically operated 1 Description inverse proportional pressure-relief valves are direct acting screw-in cartridges
Technical Data. Dimensions
0102 Model Number Features Comfort series 15 mm non-flush Stainless steel housing Accessories BF 30 Mounting flange, 30 mm Technical Data specifications Switching element function NAMUR, NC Rated operating
LMP 307. Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % / 0.
LMP 07 Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % / 0. % FSO Nominal pressure from 0... mho up to 0... 50 mho Output signals -wire: 4... 0 ma -wire: 0...
High-performance submersible pressure transmitter For level measurement Model LH-20
Electronic pressure measurement High-performance submersible pressure transmitter For level measurement Model LH-20 WIKA data sheet PE 81.56 Applications Deep well and borehole measurements Groundwater
ATEX VACUUM PUMPS AND GAUGES CHEMICALLY RESISTANT, OIL-FREE AND SAFE
ATEX VACUUM PUMPS AND GAUGES CHEMICALLY RESISTANT, OIL-FREE AND SAFE ATEX CHEMISTRY DIAPHRAGM PUMPS. ATEX VARIO CHEMISTRY DIAPHRAGM PUMPS. Chemistry diaphragm pumps, vacuum systems and gauges for use in
2/ Port G1/4
CATALOGUE > Release 8.8 > Series ER100 digital electro-pneumatic regulators Series ER100 digital electro-pneumatic regulators Port G1/4 Compact design Digital display Analog and digital input Programmable
Proportional Pressure-Relief Cartridge Valve, Size 2...4
Proportional Pressure-Relief Cartridge Valve, Size... Q max = l/min, p max = 3 bar Direct acting, electrically operated 1 Description proportional pressure-relief valves are direct acting screw-in cartridges
Parallel grippers HGPT-B, heavy-duty
Key features Advantages compared with the parallel gripper HGPT Space-optimised: Choice of shorter housing without gripping force retention or longer housing with gripping force retention Increased gripping
Pneumatic turret stop with 6, 8 and 12 stop positions for automation
SOMATEC Sondermaschinen-Vorrichtungen Komponenten für Maschinenbau Klaus Mayer Gewerbestraße 19 88636 Illmensee Telefon 07558/1441 www.somatec-mb.de Telefax 07558/674n Pneumatic turret stop with 6, 8 and
Technical Data. General specifications. Rated operating distance s n 5 mm
0102 Model Number Features 5 mm flush Usable up to SIL 2 acc. to IEC 61508 Accessories EXG-18 Quick mounting bracket with dead stop BF 18 Mounting flange, 18 mm Technical Data specifications Switching