Depth Micrometer Page 205. Depth Gauge Page 208. Depth Gauge Accessories Page 218
|
|
- Meghan Heath
- 5 years ago
- Views:
Transcription
1 Depth Measuring Instruments Depth Micrometer Page 205 Depth Gauge Page 208 Depth Gauge ccessories Page
2 Measuring force Measuring span Spindle pitch Micrometer Head Feed (0-25 ) Flatness of reference surface (base) Flatness of measuring face (rod) Parallelism between measuring face (rod) and reference surface (base) Measuring surfaces Base Graduation Scale Delivered 5- N 25 0,5 with spindle lock ±3 µm 1,3 µm (63,5 ) 2 µm (1,6 ) 0,3 µm (4+/50) µm =max. measuring length () Hardened, precision ground, micro-lap finish Hardened tool steel thimble and sleeve satin chrome finish, ø 18 Including box and key Depth Micrometer Series 128 This micrometer allows you to measure depth and offers you the following features: ø4 measuring rod. Ratchet stop provides you with constant measuring force. Measuring rod lock. Carbide-tipped measuring rod model is available Base (W x T) ,5 x ,6 x Carbide-tipped measuring rod Base (W x T) ,5 x ,6 x
3 Depth Micrometer with Interchangeable Rods Series 129 This interchangeable rod type micrometer can be used for wide range measurements. It offers you the following benefits: ø4 interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement The ratchet stop provides constant measuring force. Measuring rod lock Base 1,6 x 16 Number of rods Measuring force Measuring span Spindle pitch Micrometer Head Feed (0-25 ) Zero point errors of rods Flatness of reference surface (base) Flatness of measuring face (rod) Parallelism between measuring face (rod) and reference surface (base) Measuring surfaces Base Graduation Scale Delivered 5- N 25 0,5, with spindle lock ±3 µm ±4 µm (0-150 ) ±6 µm (0-300 ) 1,3 µm for 63,5 2 µm for 1,6 0,3 µm (4+ /50) µm =max. measuring length () Hardened, precision ground, micro-lap finish Hardened tool steel Thimble and sleeve satin chrome finish ø18 Including box and key Base 63,5 x 16 Number of rods ø4 ø18.3 = 206
4 Digimatic Depth Micrometer with Interchangeable Rod Functions Series 329 ZERO/BS DT/HOD ock function uto Power OFF after 20 min. non use 2 x PRESET ow voltage alarm Data output Digital step Measuring force Scale Measuring span Spindle pitch Zero point errors of rods Micrometer Head Feed (0-25 ) (excluding quantizing error) Flatness of reference surface (base) Flatness of measuring face (rod) Parallelism between measuring face (rod) and reference surface (base) Measuring surfaces 0, N Thimble and sleeve satin chrome finish, ø ,5 with spindle lock ±4 µm (0-150 ) ±6 µm (0-300 ) ±3 µm 2 µm 0,3 µm (4+/50) µm = max. measuring length () Hardened, precision ground, micro-lap finish Base Hardened tool steel Battery life approx. 2,4 years Delivered Including box, key and 1 battery 05CZ662 05CZ663 02ZD90B 06DV380B Description Digimatic Cable with Data Button IP Type, 1m, Micrometer Type Digimatic Cable with Data Button IP Type, 2m, Micrometer Type U-WVE T Connection Cable B, with Data Button IP Micrometer Type USB Input Tool Direct (Digimatic USB), with Data Button IP Micrometer Type Series 329 This interchangeable rod type micrometer can be used for wide range measurements. It offers you the following benefits: ø4 interchangeable rods, with lapped measuring surfaces, enable you to make wide-range measurement The ratchet stop provides constant measuring force. Measuring rod lock Base (W x T) Number of rods ,6 x ,6 x Consumable spares Description Battery SR44 1.5V 1.6 ø4 ø18.3 = 20
5 BSOUTE Digimatic Indicator Depth Gauge Series 54 This BSOUTE Digimatic Indicator Depth Gauge offers you the following benefits: It is equipped with the BSOUTE Digimatic Indicator ID-C. It has a hardened, precision ground and micro-lapped reference face on its base With indicator BD Base size Base flatness ccuracy µm ± 5 µm 63,5 x µm ± 5 µm 1,6 x With indicator BD Base size Base flatness ccuracy µm ± 20 µm 63,5 x µm ± 20 µm 1,6 x Functions Series 54 ZERO/BS GO/±NG judgement Digimatic data output DT/HOD ock function PRESET Counting direction switchable Calculation function ccuracy Refer to the list of specifications (excluding quantizing error) Stroke 12, Contact point Carbide ball larm ow voltage, counting value composition error, overflow error, tolerance limit setting error Scale Capacitance type BSOUTE linear encoder Power supply 1 battery SR-44 Battery life approx. 00 hours Measuring force 1,5 N Delivered Including Box and extensions, 20, 30 (2 pcs.), Max. response Unlimited speed Description Digimatic Cable, Flat Straight Type, 1m Digimatic Cable, Flat Straight Type, 2 m 02ZD90F U-WVE T Connection Cable F, Flat Straight Type 06DV380F USB Input Tool Direct (Digimatic USB) cable, 2m, Flat Straight Type Consumable spares Description Battery SR44 1.5V 21ZB149 ifting ever, S-Type Series 2,3,4 (up to ) 21J224 Contact Element Ball Point, 14 ength, Carbide, , = , =1,6 208
6 Dial Indicator Depth Gauge Graduation Series This rectangular base dial indicator depth gauge offers you the following benefits: Rectangular base. It has a hardened, precision ground and micro-lapped reference face on its base. () (114) 12 ø15.4 SR 0.2 ø (65) 2 () () ø16 ø6 SR 1.5 (11) (35) (65) Stroke With horizontal indicator 1162 Base flatness ccuracy [µm] Measuring force [N] Base size ±15 µm 1,4 63,5 x 16 Probe tip Ball R = 1,5 Extension rods, 20, 30, 30, 200 () () 211 = = 1.6 ø16 ø6.5 ø SR 1.5 (35.) 50 (18) (65) With indicator 2902SB Base flatness ccuracy Stroke [µm] Measuring force [N] Base size ±15 µm 1,4 40 x ±15 µm 1,4 63,5 x ±15 µm 1,4 1,6 x ±15 µm 1,4 x ±15 µm 1,4 150 x 18 Probe tip Needle R = 0,2 Ball R = 1,5 Ball R = 1,5 Ball R = 1,5 Ball R = 1,5 Extension rods 200, 20, 30, 30, 245, 20, 30, 30, 295, 20, 30, 30, 34, 20, 30, 30, 820 () () ø16 ø6.5 SR 1.5 (18) (35.) (65) ø With indicator 2952SB Stroke Base flatness ccuracy [µm] Measuring force [N] Base size ±30 µm 2,5 63,5 x ±30 µm 2,5 1,6 x 16 Probe tip Ball R = 1,5 Ball R = 1,5 Extension rods 30, 60, , 60, (30) (4) (65) ø16 ø6 (11) (35) 14 SR = = 1.6 ø39 (64) ø16 M2.5x0.45 (35) (11) (5) 22 ø6 SR = 63.5 SR
7 Dial Indicator Depth Gauge Series This round base type dial indicator depth gauge offers you the following benefits: Round base type It has a hardened, precision ground and micro-lapped reference face on its base. Graduation Consumable spares Description Contact Element Needle, R 0,2, ength, Steel, 21J224 Contact Element Ball Point, 14 ength, Carbide, 21J226 Contact Element Ball Point, 22 ength, Carbide, Circular base with indicator 2902SB. Stroke Base flatness Measuring force Base size ccuracy Probe tip [µm] [N] ±15 µm 1,4 ø 16 Needle R = 0, ±15 µm 1,4 ø 25 Ball R = 1, ±15 µm 1,4 ø 40 Ball R = 1, (4) ø (65) () ø3 SR 0.2 SR = ø = ø40 2
8 BSOUTE Digimatic Depth Gauge Functions Series 51 ORIGIN (BS-Zero) ZERO/BS ON/OFF ow voltage alarm Data output ccuracy Refer to the list of specifications (excluding quantizing error) Digital step Max. response Unlimited speed Repeatability Battery life approx hours (150/200 ) approx hours (>200 ) Display CD; character height 9 (150/200/300 ), (>300 ) Delivered In a box including 1 battery Description Digimatic Cable, Straight, Data Button, 1m Digimatic Cable, Straight, Data Button, 2m 02ZD90C U-WVE T Connection Cable C, Straight, with Data Button 06DV380C USB Input Tool Direct (Digimatic USB), Straight, with Data Button Data Hold Unit 9003 Extension Base, Depth Gauge, 180 width for up to 300 range Extension Base, Depth Gauge, 260 width for up to 300 range Extension Base, Depth Gauge, 320 width for up to 300 range Series 51 This is a standard model depth gauge that lets you take accurate measurements. It offers you the following benefits: BSOUTE System gives you reliable measurements. Its base and measuring faces are hardened and micro-lapped for robustness. arge character height of 9 makes measurements easy to read. Exceptional battery life ccuracy Base (W x T) ±0, x ±0, x ±0, x ±0, x ±0, x ±0, x ±0, x 60 1 Consumable spares Description Battery SR44 1.5V (2.5) 4 x Ø Up to 300 range > 300 range 211
9 BSOUTE Digimatic Depth Gauge Series 51 This depth gauge is IP6 coolant proof and offers you the following benefits: BSOUTE System gives you reliable measurements. Its base and measuring faces are hardened and micro-lapped for robustness. It has excellent resistance against water and dust (IP6 protection level) enabling you to use it in machining situations that include splashing coolant fluid. Extremely resistant to both coolants and lubricants ccuracy Base (W x T) ±0,02 23 x ±0,02 28 x ±0, x 6,3 35 Functions Series 51 ORIGIN (BS-Zero) uto Power OFF after 20 min. non use ow voltage alarm Data output ccuracy Digital step Max. response speed Repeatability Battery life Display Delivered Refer to the list of specifications (excluding quantizing error) Unlimited approx. 5 years (150, 200 ) 5000 hours (300 ) CD, Character Height 9 (150, 200 ),2 (300 ) In a box including 1 battery Description 05CZ624 Digimatic Cable with Data Button IP Type, 1m, Caliper Type 05CZ625 Digimatic Cable with Data Button IP Type, 2m, Caliper Type 02ZD90 U-WVE T Connection Cable, with Data Button IP Caliper Type 06DV380 USB Input Tool Direct (Digimatic USB), with Data Button IP Caliper Type 9003 Extension Base, Depth Gauge, 180 width for up to 300 range Extension Base, Depth Gauge, 260 width for up to 300 range Extension Base, Depth Gauge, 320 width for up to 300 range 3.5 Consumable spares Description Battery SR44 1.5V (41.2) 16 Interchangeable base 2 x Ø 5 : 0-150, Bore depth gauges Washer Screw Mounting the interchangeable base (86.) 5 (20) 2 x Ø 5 :
10 16 (41.3) (41.3) Functions ORIGIN (BS-Zero) OFFSET uto Power OFF after 20 min. non use ow voltage alarm Data output ccuracy Digital step Max. response speed Repeatability Battery life Display Delivered Series ±0,03 (excluding quantizing error) Unlimited approx. 5 years CD, Character Height 9 In a case including 1 battery BSOUTE Digimatic Depth Gauge IP6 Hook/Pin Type Series 51 Direct reading for either measuring surface is obtained by pressing the OFFSET function, which compensates for the width of the hook Description 05CZ624 Digimatic Cable with Data Button IP Type, 1m, Caliper Type 05CZ625 Digimatic Cable with Data Button IP Type, 2m, Caliper Type 02ZD90 U-WVE T Connection Cable, with Data Button IP Caliper Type 06DV380 USB Input Tool Direct (Digimatic USB), with Data Button IP Caliper Type 9003 Extension Base, Depth Gauge, 180 width for up to 300 range Extension Base, Depth Gauge, 260 width for up to 300 range Extension Base, Depth Gauge, 320 width for up to 300 range Consumable spares Description Battery SR44 1.5V Hook Type Depth Hook Base (W x T) range range , x , x Pin Type Base (W x T) x x x Ø 5 (5.5) Mounting the interchangeable base 2 x Ø 5 (5.5) Ø 1,
11 Vernier Depth Gauge Series 52 This vernier depth gauge offers you the following benefits: Its base and measuring faces are hardened and micro-lapped for robustness. Fine adjustment models are available. ccuracy Refer to the list of specifications Description 9003 Extension Base, Depth Gauge, 180 width for up to 300 range Extension Base, Depth Gauge, 260 width for up to 300 range Extension Base, Depth Gauge, 320 width for up to 300 range 52-1 Graduation ccuracy Base (W x T) ,05 ±0,05 x 6, ,02 ±0,03 x 6, ,05 ±0,05 x 6, ,02 ±0,03 x 6, ,05 ±0,08 x 6, ,02 ±0,04 x 6, ,05 ±0,1 250 x ,05 ±0, x With fine adjustment Graduation ccuracy Base (W x T) ,02 ±0,03 x 6, ,02 ±0,03 x 6, ,02 ±0,04 x 6, ,02 ±0, x ,02 ±0,0 250 x with xø 5 Up to 300 range models x Ø 9 Over 300 range models 214
12 21 11 Vernier Depth Gauge Hook Type ccuracy Refer to the list of specifications Description 9003 Extension Base, Depth Gauge, 180 width for up to 300 range Extension Base, Depth Gauge, 260 width for up to 300 range Extension Base, Depth Gauge, 320 width for up to 300 range Series 52 This hook type vernier depth gauge offers you the following benefits: The end of the beam is hook-shaped so you can take depth and thickness measurements of a projected portion or lip in a hole, as well as standard depth measurements. Fine adjustment models are available. Interchangeable base Bore depth gauges Washer Screw Mounting the interchangeable base Depth Hook Graduation ccuracy range range , ,05 ±0, , ,05 ±0, , ,05 ±0, With fine adjustment Depth Hook Graduation ccuracy range range , ,02 ±0, , ,02 ±0, , ,02 ±0, Ø = depth-vernier reading / 2 = hook-vernier reading / 3 = (depth-vernier reading) - (hook-vernier reading) 215
13 Dial Depth Gauge Series 52 This dial depth gauge offers you the following benefits: The dial is very easy-to-read. Its base and measuring faces are hardened and micro-lapped for robustness. You can make fine adjustments. ccuracy Graduation Base size Refer to the list of specifications 0,05 x 6,5 (W x T) Description 9003 Extension Base, Depth Gauge, 180 width for up to 300 range Extension Base, Depth Gauge, 260 width for up to 300 range Extension Base, Depth Gauge, 320 width for up to 300 range ccuracy ±0, ±0, ±0, Interchangeable base 2 x Ø 5 Bore depth gauges Washer Screw Mounting the interchangeable base
14 Tyre Tread Depth Gauge Functions Series 51 ORIGIN (BS-Zero) uto Power OFF after 20 min. non use ow voltage alarm Data output ccuracy Digital step Max. response speed Repeatability Battery life Display Delivered Refer to the list of specifications (excluding quantizing error) unlimited approx. 5 years CD, Character height 9 Including 1 battery Series 51 This is designed to measure tyre tread depth and offers you the following benefits: The BSOUTE feature of this gauge keeps track of the origin point (once set) for the entire life of the battery. It gives you SPC data output. (60) Ø1,5 ø ,3 16 (3.5) 05CZ624 05CZ625 02ZD90 06DV380 Description Digimatic Cable with Data Button IP Type, 1m, Caliper Type Digimatic Cable with Data Button IP Type, 2m, Caliper Type U-WVE T Connection Cable, with Data Button IP Caliper Type USB Input Tool Direct (Digimatic USB), with Data Button IP Caliper Type ccuracy ±0, ø3 Consumable spares Description Battery SR44 1.5V 2
15 Optional ccessories for Depth Gauge Extension bases These optional extension bases can be fitted to depth gauge models up to range. They cannot be attached to or 0-0 range models B Number of holes B B ttaching the extension base n M4 P=0. R5 R5 218
WATERPROOF DIGITAL DEPTH GAGES
WATERPROOF DIGITA DEPTH GAGES ATTENTION: NO ATTENTION: IT IS NECESSARY TO SET ZERO AFTER POWER ON EACH TIME IP ust/waterproof Button function: zero, on/off, mm/inch, ABS/RE, hol Meet DIN82 Mae of stainless
More informationMETROLOGY LAB. I DEVICES BASED ON VERNIER SCALE
METROLOGY LAB. I DEVICES BASED ON VERNIER SCALE Indirect Measurement; two balls 2 Lab6: Roundness Test 12/1/2017 Indirect Measurement; four balls 3 Lab6: Roundness Test 12/1/2017 Angle measurement using
More informationOD plug gauge. for bores and internal profiles from dia. 2,5 mm. OD plug gauge in open design. Special designs Accessories. OD plug gauge for various
OD plug gauge for various bore diameters Cross sleeve Cross sleeve with runners OD plug gauge for bores and internal profiles from dia. 2,5 300 Oskar Schwenk GmbH & Co. Esslinger Straße 84 70736 Fellbach
More informationHEAVY DUTY PNEUMATIC
HEAVY DUTY PNEUMATIC Series A4 MEDIUM DUTY HYDRAULIC Series H4 PERMANENTLY LUBRICATED HEAVY DUTY PNEUMATIC Series L4 586.778.7680 SERIES A4/L4/H4 39 A4/L4/H4 FEATURES 1 1 9 9 12 8 7 5 12 3 13 4 10 2 11
More informationDigital Dial Thickness Gauge
Digital Dial Thickness Gauge Dial Height Gauge Digital Height Gauge Dial Thickness Gauge Dial Thickness Gauge For measuring thickness of varies objects such as leather, paper, plastic sheets, metal sheets,
More informationIDL01. Battery Powered Precision Digital Gauge for Leak Testing. Stainless Steel Sensor. class 0.05
IDL0 Battery Powered Precision Digital Gauge for Leak Testing Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger
More informationDorsey Standard Bore Gages
Dorsey Standard Bore Gages A time proven design made better by Dorsey This design of rugged production line bore gages has been an industry standard for more than 75 years. Dorsey offers precise replacement
More informationTECHNICAL INFORMATION
TECHNICAL INFORMATION Model No. Description RP2300FC, RP2301FC Router CONCEPT AND MAIN APPLICATIONS Models RP2300FC and RP2301FC are upgraded sister tools of our current plunge-type electronic router Model
More informationSX150A. Features. Typical Applications. Description
Datasheet -- Pressure Sensors: Measurement Type: Absolute; 0 psia to 150 psia, Unamplified, Representative photograph, actual product appearance may vary. Due to regional agency approval requirements,
More information10 switches simultaneously. The settings of the master sensor (source of copy) can be copied to the slave sensors. Reducing setting labor
2-Color Display High-Precision Digital Pressure Switch Series ZSEA(F)/EA ZSE E RoHS New IP65 ZSE E ZSE0 E0 M8 connector type E70 ZSE E E Applicable Air, Non-corrosive gas, Non-flammable gas fluid Can copy
More informationDM01. Please visit our website: Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
DM0 Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing
More informationbetter measurement Simply a question of SCHMIDT Flow Sensor SS The cost-effective alternative in pressurised systems up to 10 bars.
Simply a question of better measurement SCHMIDT Flow Sensor SS 20.261 The cost-effective alternative in pressurised systems up to 10 bars. Compressed air technology Industrial processes A cost analysis
More informationDM01. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 00 mbar up to 0... 00 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing Ø
More information2/ Port G1/4
CATALOGUE > Release 8.8 > Series ER100 digital electro-pneumatic regulators Series ER100 digital electro-pneumatic regulators Port G1/4 Compact design Digital display Analog and digital input Programmable
More informationRCP5W-RA Series. www. r o b o c y lind e r. d e. Dust-/Splash-/Water-proof RoboCylinder Rod Type with Battery-less Absolute Encoder
Product Data Sheets RCPW-RA RoboCylinder Brochure Extract GB Dust-/Splash-/Water-proof RoboCylinder Rod with Battery-less Absolute Encoder RCPW-RA Series www. r o b o c y lind e r. d e Specification Table
More informationSmart performance with innovative and ever-strong coil drive even under harsh working environments
Smart Valve Positioner SS2 inear / Rotary Smart performance with innovative and ever-strong coil drive even under harsh working environments Easy and quick auto-calibration Detecting RA (reverse acting)
More information3/2-way valve, Series CD07 Qn= 1400 l/min pipe connection compressed air connection output: G 1/4 - M14x1,5 suitable for ATEX
/-way valve, Series CD07 Version Spool valve, zero overlap Sealing principle soft sealing Working pressure min./max. -0.95 bar / 0 bar Ambient temperature min./max. -5 C / +80 C Medium temperature min./max.
More informationETd 04. Battery Powered Precision Digital Gauge. Stainless Steel Sensor. Type: ETd 04. class 0.05
Battery Powered Stainless Steel Sensor class 0.05 Nominal pressure from 0 100 mbar up to 0... 400 bar Special characteristics modular sensor concept data logger graphic display stainless steel housing
More informationDigital electro-pneumatic regulators Series ER100
CATALOGUE > Release 8.2 Digital electro-pneumatic regulators Series ER100 TREATMENT > Digital electro-pneumatic regulators Series ER100 Port G1/4» Compact design» Digital display» Analog and digital input»
More informationHigh precision dispensing valve that is an uncompromising response to the need for sophisticated dispensing equipment
Fluid dose dispensing valve High precision dispensing valve that is an uncompromising response to the need for sophisticated dispensing equipment Provides the high productivity, stability, reliability,
More informationExpert Hydrostatic Level Transmitters
Expert Hydrostatic s General Features MJK Expert hydrostatic level transmitters are designed for level measurement by submerging the transmitter in open channels, drains and tanks. Expert hydrostatic level
More informationTechnical documentation OD plug gauge
Content 1 GENERAL REMARKS 4 1.1 APPLICATIONS 4 1.2 FUNCTION 4 1.2.1 CENTRING 4 1.2.2 EXPANDING PROBE 4 1.2.3 FLOATING CONTACTING 5 1.3 ADVANTAGES 5 2 CONSTRUCTION 7 2.1 OD MEASURING SLEEVE 7 2.1.1 BASIC
More informationTapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.
434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300
More informationMicro grippers HGPM/HGWM
HGPM/HGWM Miniaturised and optimised for assembly tasks Versatile 2004/10 Subject to change Products 2004/2005 1 / 1 HGPM/HGWM Key features HGWM HGPM 1 2 3 4 1 2 3 4 System product for handling and assembly
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa Max. operating pressure
More informationG1/8 G1/8. Model 0 bar -0,1 bar -0,2 bar -0,3 bar -0,4 bar -0,5 bar -0,6 bar -0,7 bar -0,8 bar
single stage pumps M/5811 Very high induced air capacity % lower air consumption than comparable single stage units No wearing parts Compatible with a wide range of line contaminants llows direct connection
More informationA Low Cost Digital Angle Gage, version 3
A Low Cost Digital Angle Gage, version 3 By R. G. Sparber Copyleft protects this document. 1 Sometimes re-inventing the wheel has advantages. What you see here is just a variation on a sine bar. The accuracy
More informationSingle and double acting, magnetic, self-centering Bores: ø 16, 20, 25, 32, 40 mm
> Series CGPT self-centering parallel grippers with T-guide Series CGPT self-centering parallel grippers with T-guide Single and double acting, magnetic, self-centering Bores: ø 6, 20, 25, 32, 40 mm New
More informationTechnical Data Sheet TI-F50 Locking Units series KFH
English translation of German original Locking Units series KF Further important practical advice is given in Operating Manual BA-F50., Rod diameter 18 mm 50 mm øz 8 L 2 6 x 6 0 min. 4x30 KF 18 to KF 32,
More informationMAINTANCE MANUAL CNC ROTARY TABLE MODEL: DMNC-5C YUASA INTERNATIONAL.
MAINTANCE MANUAL CNC ROTARY TABLE MODEL: DMNC-5C YUASA INTERNATIONAL. INDEX DESCRIPTION PAGE (1)SPECIFICATION 2 (2)OUTSIDE DIMENSION LAYOUT 3 (3)INSPECTION REPORT 4 (4)PREPARATION FOR OPERATION 5 4-1.LUBRICATING
More informationSupplementary instructions. Rod and cable components. for VEGAFLEX series 80. Document ID: 44968
Supplementary instructions Rod and cable components for VEGAFEX series 80 Document ID: 44968 Contents Contents 1 Product description 1.1 Extensions... 3 2 Mounting 2.1 General instructions... 6 2.2 Rod
More informationM95 insulation blowing machine Reliability and power in a compact design.
M95 insulation blowing machine Reliability and power in a compact design. Empfangsteil/Receiver Artikel 5157 Building on an already-successful design Visionary insulation blowing technology Suitable for
More informationCost effective. Smooth. Reliable. LOG Internal Hole Gripper
LOG Cost effective. Smooth. Reliable. LOG Internal Hole Gripper Light gripper made of very resistant polyamide with closed diaphragm system Field of Application Particularly suited to highly dynamic applications
More informationGripping rotary modules
Gripping rotary modules Gripping rotary modules GRIPPING ROTARY MODULES Series Size Page Gripping rotary modules RP 314 RP 1212 318 RP 1216 322 RP 1520 326 RP 2120 330 RP 2128 334 RC 338 RC 1212 342 RC
More informationSSL. Smart Valve Positioner.
Smart Valve Positioner Smartest valve control device meeting a dynamic performance and a precise setting with a piezoelectric technology and an optimized auto-calibration program Features Auto-Calibration
More informationEXH. Specifications. Descriptions. Min. working pressure MPa
Functional explanation Primary pressure flowed from passes through check valve on side, and flows in chamber A and B. Primary pressure also passes through pressure adjustment section and switching valve,
More informationFLAMMABLE GAS SENSOR/TRANSMITTER
FLAMMABLE GAS SENSOR/TRANSMITTER Plant safety protection for flammable gases. F E A T U R E S Fixed gas monitoring for point source hazards and perimeter protection in arduous duty and exposed locations.
More informationproduct manual H-1200 & H-1250 Universal and Portable Penetrometers
07.09 product manual H-1200 & H-1250 Universal and Portable Penetrometers Introduction Universal Penetrometer H-1200 Direct-reading instrument for precision penetration measurements of bituminous materials,
More informationModel AWG20 AWG30 AWG40 AWG20K AWG30K AWG40K
Modular Type ilter Regulator with uilt-in Pressure auge eries W ilter Regulator with uilt-in Pressure auge eries W ominal filtration rating ccessory W2 /8, /4 W3 /4, 3/8 W /4, 3/8, /2 racket Pages 424
More informationElcometer ISO Groove Depth Checker. Operating Instructions
Elcometer 2060 English ISO Groove Depth Checker Operating Instructions English The Elcometer 2060 ISO Groove Depth Checker has been tested in accordance with EU regulations governing electro-magnetic compliance
More information159 mm 154 mm. Subject to changes 10/2012
Low-pressure calibrator LPX calibrator medium: air / up to 10 bar KELLER pressure calibrators are highly accurate calibration instruments which are available for the following pressure ranges: -0,85 10
More informationElectronic gas volume corrector model DGVC-04
Electronic gas volume corrector model DGVC-04 1. Introduction The following user s manual gives information about the installation, configuration, usage and storage of the electronic gas volume corrector
More informationEPP4 Pressure Regulator Basic G 1/4"
EPP4 Pressure Regulator Basic G 1/4" Flow Curve 1/4" Dimensions Outlet pressure - bar 9 8 7 6 5 4 3 2 1 0 0 20 40 60 70 80 100 120 Flow rate - Nm 3 /h The male connector adopted on the EPP4 is a standard
More informationDescription. Measuring Device 3760XBI USP. Balancing
Measuring Device 3760XBI Description 3760XBI comprises from a differential pressure unit with an integrated true differential pressure sensor for the exact measuring of both differential and static pressures
More informationPreferred Instruments Danbury, CT USA
Tank Level Sensor Model TG-EL-WF-xx Installation & Operation Instructions SDI-TG-EL-WF March 6, 2006 Preferred Instruments Danbury, CT USA www.preferredinstruments.com CONTENTS Installation Pg. 2 Calibration
More informationwith accessories DP - Precision ram adjustment HS - Return travel lock Type EP EP L-EP EP L-EP
Toggle presses P Range L-P Range with extra large daylight Toggle presses P 500-40 P 750-40 with accessories P - Precision ram adjustment HS - Return travel lock L-P 1200-60 Type P 500-40 P 750-40 L-P
More informationSENSORS Pressure CALDARO
SENSORS Standards Specials THE MMI & MMF SPECIALIST The Caldaro Way From the very beginning Caldaro has managed to establish itself as a highly reputable OEM supplier of tailored controller and sensor
More informationEasy to operate even for biginners. Set up the number of test. Possible to select from 1 to times
With a force gauge and attachments, compression/tensile/peeling tests are possible up to 1000N/2500N. It provides consistent testing speed and direction, offering highly accurate test results. MX2-2500N
More informationOUTER RACE SHIM SPACERS METRIC OUTER RACE SHIM SPACERS. All Dimensions in Millimeters. Material:300 Series Stainless Steel
OUTER RACE SHIM SPACERS Material:300 Series Stainless Steel METRIC OUTER RACE SHIM SPACERS All Dimensions in Millimeters Material:300 Series Stainless Steel 6-16 INNER RACE SHAFT SPACERS 3 /32" To 1 /2"
More informationBUYER S GUIDE AQUAlogger 530WTD
OCEAN & ENVIRONMENTAL BUYER S GUIDE AQUAlogger 530WTD Wireless Temperature and Depth Logger AQUAlogger 530WTD The AQUAlogger 530WTD has an innovative design that includes the ability to transfer stored
More informationALF400 to 900, ALT-5/-9
uto Feed Lube, uto Feed Tank LF00 to 900, -/-9 Standard Specifications uto feed lube uto feed tank LF00 LF00-0 LF00 LF00 LF00 LF900 - --IS- -9 IR : OIL : Fluid Proof pressure ir. MPa 0. MPa.0 MPa (Note
More informationFTC130 Transmitter. Operating Manual
Seite 1 von 11 FTC130 Transmitter Fast Thermal Conductivity Analyzer Operating Manual 1.09KD180724CWI1V05 Messkonzept GmbH Seite 2 von 11 1. Intended Use... 3 2. Description... 4 3. Measuring gases and
More informationK0709 Quick-fit couplings
Joints 1067 K0709 Quick-fit couplings with radial offset compensation external thread D1 SW SW1 application example: X max. D D 3 4 internal thread SW 3 4 2 SW1 D D Coupling part and claw in steel. Nut
More informationParallel grippers HGPM, micro
Key features G6: G8: G9: stroke compensation clamping spigot flange mounting At a glance Compact, handy design With open or closed gripper jaws Versatility thanks to externally adaptable gripper fingers
More informationUNIMAT Basic. Material Testing Machine. for the. Quality Control. with. Software (intern) for Stand Alone Usage
Material Testing Machine for the Quality Control UNIMAT Basic 050 052 054 056 with Software (intern) for Stand Alone Usage testing equipment for quality management Technical Description Universal Testing
More informationuser leaflet GAUGING TRANSDUCERS
user leaflet Solartron Metrology Gauging Transducers are high precision measurement probes intended for all gauging applications demanding high accuracy and a high degree of repeatability. The one piece
More informationLINEAR BEARINGS and Recirculating Units
LINEAR BEARINGS and Recirculating Units Table of Contents 1 Product Overview............................................. 6 2 Applications 2.1 Linear Bearings for a Universal Tool Grinding Machine Table..........
More informationPressure transmitter PASCAL Ci4
Pressure transmitter PASCAL Ci4 for general application,type Series CI4100 Features Pressure transmitter for the measuring of relative and absolute pressures of gases, vapors and liquids High-resolution
More informationPZN-plus. Application example. Pneumatic 3-Finger Centric Gripper Universal Gripper. Sizes Gripping force 580 N..
PZN-plus Sizes 40.. 300 Weight 0.43 kg.. 43.5 kg Gripping force 580 N.. 38000 N Stroke per finger 3 mm.. 35 mm Workpiece weight 2.9 kg.. 190 kg Application example Insertion tool for assembling small to
More informationSSR. Smart Valve Positioner.
Smart Valve Positioner Smartest valve control device meeting a dynamic performance and a precise setting with a piezoelectric technology and an optimized auto-calibration program Features Auto-Calibration
More informationAir Saving Valve reduction in 40% air consumption 40% air consumption Air consumption reduction ratio (%) Flow valve Flow valv
CAT.ES-173 A Air Saving Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction ratio (%) 3 1.1.1...3 pressure
More informationJUMO dtrans p30 Pressure Transmitter
609 Fulda, Germany Postal address: 605 Fulda, Germany Phone: +49 661 600-0 Fax: +49 661 600-607 Phone: +44 179 6 55 Data Sheet 40466 Page 1/6 JUMO dtrans p0 Pressure Transmitter General application Pressure
More informationSensoric 4-20 ma Transmitter Board Operation Manual
Sensoric 4-20 ma Transmitter Board Operation Manual 1 Content Features Operation Manual Technical Data Mechanical Dimensions Remarks & Contact information 2 Features Soldered sensor cell (non replaceable)
More informationP900. P900, Datenblatt Seite 1 DESCRIPTION
, Datenblatt Seite 1 Field proven rugged construction High overpressure capability High reliability for demanding environments Application specific customization Excellent media compatibility Shock and
More informationNivuBar Plus II
NivuBar Plus II Ceramic diaphragm Capacitive measuring cell 2-wire technology (output 4-20 ma) Integrated overload protection Extensive, almost front flush diaphragm Ex approval for zone 0 as standard
More informationMASTER TRUING STAND TS-3. Optional Dial indicator set with brackets Dial indicator bracket set only
MASTER TRUING STAND TS-3 3 2 1 3 8 9 4 10 7 6 5 12 13 Optional 1555-1 Dial indicator set with brackets 1556-1 Dial indicator bracket set only 49 11 16 14 15 48 32 31 37 38 20 19 17 18 34 39 21 36 22 33
More informationDescription Pressure range Connection thread Device Page
Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4
More informationHoisting Equipment Cable puller & Accessories
Yale hoists and trolleys are not ed for Cable puller model Yaletrac Pulling force 800-3200 It has a light weight, compact, high tensile aluminium alloy housing with a large flat bottom surface for increased
More informationDraw-wire system SZG165
Draw-wire system SZG165 www.wachendorff-automation.com Wachendorff Automation... systems and encoders Complete systems Industrial rugged encoders to suit your application Standard range and customer versions
More informationSCOPE OF THIS GUIDE STARTING-UP. 1 Check mini CORI-FLOW functional properties
Quick Installation Guide Doc nr.: 9.17.052H Date: 10-12-2015 SCOPE OF THIS GUIDE mini CORI-FLOW instruments are highly accurate instruments for measuring and controlling the mass flow rate of liquids and/or
More informationATS430 turbidity sensor Retractable insertion assembly
A MEASUREMENT & ANALYTICS INSTRUCTION ATS430 turbidity sensor Retractable insertion assembly Measurement made easy 1 Introduction This publication details installation procedures for the retractable insertion
More informationOMS Technical Information. Versions OMS. Versions
Versions Versions Mounting flange Shaft Port size European version US version Drain connection Check valve Main type designation Standard flange Cyl. 32 G 1/2 l Yes Yes Cyl. 1.25 in 7/8-14 UNF l Yes Yes
More informationProduct information. Capacitive. Level detection in liquid VEGACAP 62 VEGACAP 63 VEGACAP 64 VEGACAP 66 VEGACAP 69. Document ID: 29983
Product information Level detection in liquid VEGACAP 62 VEGACAP 63 VEGACAP 64 VEGACAP 66 VEGACAP 69 Document ID: 29983 Contents Contents 1 Description of the measuring principle... 3 2 Type overview...
More informationI N N O V A T I O N C O N T I N U E S... International Patent Filed in 45 Leading Countries
I N N O V A T I O N C O N T I N U E S... Quick Check International Patent Filed in 45 Leading Countries World's First Single Piece Multi-Function Check Standard for Calibration or Verification of Various
More informationOPERATION MANUAL DIVE CALIPER NOT SCALE / IF IN DOUBT ASK* *ALL UNITS IN MM/DEGREES UNLESS SPECIF. Dive Caliper General DC-051
NOT SCALE / IF IN DOUBT ASK* DIVE CALIPER OPERATION MANUAL *THIS INFORMATION IS THE PROPERTY OF ZEBRA-TECH LTD. ALL RIGHTS RESERVED.* *ALL UNITS IN MM/DEGREES UNLESS SPECIF SURFACE F 3.2 Ra UNLESS S Part
More informationTS1. Ultrasonic Tank Sender. Installation and Operating Instructions. For TS1 Firmware v3.8. Page 1 INST-TS1-V13 18/11/10
TS1 Ultrasonic Tank Sender Installation and Operating Instructions For TS1 Firmware v3.8 Page 1 Table of Contents 1. FEATURES... 3 2. SPECIFICATIONS... 3 3. DIMENSIONS... 4 4. MOUNTING AND INSTALLATION...
More informationCompressed Air Cleaning Filter Series
Compressed ir Cleaning Filter Series M /FF Series For Water Droplet, Solid/Oil Separation and Deodorization Modular connection, Space-saving design, Labor-saving in piping! Uses the same spacer as the
More informationHigh flow rate. Cost effective. Compliant. Gripper with GSW-B Shaft Interface and Compensation Unit
GSW-B-AGE High flow rate. Cost effective. Compliant. Gripper with GSW-B Shaft Interface and Compensation Unit PGN-plus / PZN-plus universal gripper with shaft interface GSW-B and AGE compensation unit
More informationDRILL MONITOR DM-100 OPERATIONS MANUAL
DRILL MONITOR DM-100 OPERATIONS MANUAL 1 INSTALLATION AND SETUP The Drill Monitor comes complete with the following parts: 1 Drill Monitor unit 1 Mounting bracket for Drill Monitor 1 Encoder 1 Encoder
More informationLMU100/200 Series. Standard Specifications
Mist Spray Unit MU/ Series Intermittent spray to cutting and press gear chains, etc. Standard Specifications Inlet air Oil tank set range Oil Dynamic viscosity of oil ( C) Oil tank capacity (cm ) mbient
More informationMPG-plus. Application example. Pneumatic 2-Finger Parallel Gripper Gripper for small components. Gripping force 38 N 175 N. Sizes
MPG-plus Sizes 25 40 Weight 0.06 kg 0.24 kg Gripping force 38 N 175 N Stroke per finger 3 mm 6 mm Workpiece weight 0.19 kg 0.7 kg Application example Pneumatically driven, dual-axis pick-and-place machine
More informationWide opening parallel grippers Series CGLN
CATALOGUE > s 202 Wide opening parallel grippers Series CGLN > Grippers Series CGLN Magnetic Sizes: ø 0-6 - 20-25 - 32 mm» High flexibility during mounting» High grip force» Rack and pinion synchronized
More informationMTS Restan. Automatic System for Residual Stress Measurement by Hole-Drilling
Automatic System for Residual Stress The MTS3000 - Restan system for measuring residual stresses Fully automatic drilling and acquisition process ensuring high repeatability High speed drilling (400,000
More informationMODEL WEIGH MODULE
MODEL 65082 WEIGH MODULE INSTALLATION & OPERATING MANUAL P.O. Box 775 - Farmington, NH 03835 Tel: 603-755-3885 email: cands_nh@msn.com www.candscontrols.com Model 65023 Cantilever Beam Transducer Nickel-Plated
More informationRotary Viscometers Rotary viscosimeters ST-2020
Rotary s Rotary viscosimeters ST-2020 INTRODUCTION Rheology is the study of the effects experimented in a substance when a mechanical force is applied on a it (flow and deformation) under different external
More informationTechnical Information Conducal CLY421
TI00496C/07/EN/01.12 71142150 Products Solutions Services Technical Information Conducal CLY421 Conductivity calibration set for ultrapure water applications Factory calibrated measurement box Certified
More informationComponents for air preparation and pressure adjustment. OUT port position ( ) connected Rear side. of IN port. Air tank. directly.
Components preparation and pressure adjustment ABP Overview ABP is a component that enables boosting by s only up to twice primary pressure (.0MPa max.) in combination with using air tank but not using
More informationTA-COMPACT-P. Combined control & balancing valves for small terminal units Pressure independent balancing and control valve (PIBCV)
Combined control & balancing valves for small terminal units Pressure independent balancing and control valve (PIBCV) IMI TA / Control valves / The pressure independent balancing and control valve ensures
More informationPGN. Application example. Pneumatic 2-Finger Parallel Grippers Universal Grippers. Gripping force 100 N N. Sizes
PGN Sizes 50.. 380 Weight 0.125 kg.. 28.0 kg Gripping force 100 N.. 15100 N Stroke per finger 2 mm.. 45 mm Force-fit gripping 0.5 kg.. 75.0 kg Application example Horizontal turning station with 180 reorientation
More informationDead Centers FN / FNC
Dead Centers FN / FNC Type FN with morse taperl Rotating and fixed tailstock spindle sleeve. Designed for employment in turning, grinding and other production machines. made of full-hardened tool steel
More informationBUYER S GUIDE AQUAlogger 520
OCEAN & ENVIRONMENTAL BUYER S GUIDE AQUAlogger 520 Mini Temperature and Pressure Logger AQUAlogger 520 Aquatec s primary temperature and depth model, the AQUAlogger 520, combines years of product development
More informationHarmony. Pressure Independent Balancing and Control Valve
Harmony Pressure Independent Balancing and Control Valve IMI FLOW DESIGN / Pressure Independent / F376.0 Harmony HARMONY The Harmony delivers a complete hydronic balancing and control solution that optimizes
More informationDepth sensor. Product reference : REV 1. USER GUIDE and INSTALLATION GUIDE. nke Sailing competition
Depth sensor Product reference : 90-60-456 REV 1 USER GUIDE and INSTALLATION GUIDE nke Sailing competition Z.I. Kerandré Rue Gutenberg 56700 HENNEBONT- FRANCE http://www.nke.fr After sale service n 33
More informationDigital pressure gauges
Digital pressure gauges Digital pressure gauges are particularly suitable for both stationary and mobile measurement and display of pressure. They can be used as reference pressure gauges to simplify the
More informationType 4708 Supply Pressure Regulator
Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to
More informationLMP 307. Stainless Steel Probe. Stainless Steel Sensor. accuracy according to IEC 60770: standard: 0.35 % FSO option: 0.25 % / 0.
LMP 07 Stainless Steel Sensor accuracy according to IEC 60770: standard: 0.5 % FSO option: 0.5 % / 0. % FSO Nominal pressure from 0... mho up to 0... 50 mho Output signals -wire: 4... 0 ma -wire: 0...
More informationFor Air Pressure. AP-30 Series. Digital Display & Digital Control. EASY-TO-SEE 2-color display. Two-color digital display pressure sensor
Cat No AP3-KA-C Two-color digital display pressure sensor AP-3 Series Digital Display & Digital Control For Air Pressure EASY-TO-SEE 2-color display Green and red two-color LED display clearly shows abnormal
More informationQuick Installation Guide Doc nr.: C Date:
Quick Installation Guide Doc nr.: 9.17.093C Date: 13-05-2016 SCOPE OF THIS GUIDE mini CORI-FLOW instruments are highly accurate instruments for measuring and controlling the mass flow rate of liquids and/or
More informationHEAVY EQUIPMENT SERVICES MECANIQUE DE MACHINERIE LOURDE
COUNTER BORING AND PRECISION MEASUREMENT TASK / TÂCHE RELATIVE AU PERÇAGE ÉTAGÉ ET À LA MESURE DE PRÉCISION HEAVY EQUIPMENT SERVICES MECANIQUE DE MACHINERIE LOURDE POST-SECONDARY / NIVEAU POSTSECONDAIRE
More information