Standards and Specifications Regarding Water, Sanitary Sewer and Storm Drainage Infrastructure. Appendix B: Approved Materials List
|
|
- Elwin Patterson
- 5 years ago
- Views:
Transcription
1 Standards and Specifications Regarding Water, Sanitary Sewer and Storm Drainage Infrastructure Appendix B: Approved Materials List
2 " MATERIALS LIST" Updated: January 9, 2018 AURORA WATER March 16, 2018 MATERIAL 100 SERIES GENERAL 101 MANHOLES AND APPURTENANCES PRECAST MANHOLE BASES AND VAULTS Copeland Precast, Inc. ASTM C478 round, ASTM C913 rect., AASHTO HS-20S loading, Forterra Manholes Base & Channel poured monolithic, ASTM C478, AASHTO HS-20S Oldcastle Precast Concrete Base w/ precast channels, ASTM C478, AASHTO HS-20S loading, STANDARD RINGS AND COVERS Lindsay Precast Base w/ precast channels, ASTM C478, AASHTO HS-20S loading, Neenah R 1706 for built-up construction, AASHTO HS-20S loading, ASTM A-48 Neenah R S for slab construction, AASHTO HS-20S loading, ASTM A-48 D & L Supply Company A-1166 for slab construction, AASHTO HS-20S loading, ASTM A-48 D & L Supply Company A-1161 & 1163 (Private MH's only), HS-20S loading, ASTM A WATERTIGHT RINGS AND COVERS East Jordan Iron Works 2405A for slab construction, AASHTO HS-20S loading, ASTM A-48 Neenah R-6461-GH for slab construction, AASHTO HS-20S loading, ASTM A LOCKABLE MANHOLE LIDS Neenah Neenah R-6464-F for built-up construction, R-1926-B with Type J-T Handle Bar Lock, East Jordan Iron Works 2045 with Type 5T Handle Bar Lock, ASTM A ADJUSTABLE SLOPE MANHOLE RINGS East Jordan Iron Works PCSI, AASHTO M306, AASHTO HS-20S loading 102 GASKETS AND SEALS PIPE PENETRATION GASKETS Kor-N-Seal ASTM C923 Press Seal Corp. PSX connectors, ASTM C923, Hamilton Kent Tylox 3SPW connector, ASTM C923. A-Lok Products, Inc ASTM C923, C1478 and ASTM F-2510 Garlock ASTM F37B, ASTM F152, Henry Company Ram-Nek preformed strips, meets AASHTO M-198 and ASTM C PREFORMED PLASTIC GASKET Mar Mac Products Mac Wrap, exceeds ASTM C877, Henry Company Rub'R Nek gasket-type sealant, ASTM C990 Hamilton Kent Kent Seal Butyl Rubber Sealant, meets AASHTO M-198 and ASTM C990 Hamilton Kent Tylox SuperSeal gasket, ASTM C443, ASTM C1619 General Sealants Inc General Sealants GS #79 or #4, meets AASHTO M-198 and ASTM C990 ConSeal Concrete Sealants Inc Conseal CS-202, meets AASHTO M-198 and ASTM C990 Henry Company Ram-Nek preformed strips, meets AASHTO M-198 and ASTM C MECHANICAL JOINT GASKET Products ANSA, AWWA C111/A LININGS AND COATINGS MANHOLE LININGS BASF Corporation MasterProtect 100CR. Tested to ASTM D 638, 695, 2240, 4541, and C 580. Raven Lining Systems Raven 405, Tested to ASTM D 638, 695, 790, 2240, 4060, 7234 Tnemec Company, Inc Perma-Shield Elasto-Shield Series , ASTM D 4259 CIM Industries, Inc CIM 1000, Tested to ANSI , ASTM E96, B117, D36, D624, Environmental Coatings, LLC Sewer Shield 100, ASTM C-413, 308, 478, 579, RUBBERIZED SPRAY-ON UNDERCOATING NAPA Part# NRA 82775, Mac's Rubberized spray-on undercoating Tite-Seal Rubberized spray-on undercoating 104 GROUT AND CEMENT PRE-MIXED, NONMETALLIC, NON-SHRINK BASF Corporation MasterFlow 885, tested per ASTM C942, 1090, 191, 78, 469 modified GROUT Sonneborn; "Ferrolith G-D.S. Redi-Mixed" JOB-MIXED GROUT BASF Corporation MasterFlow 885, tested per ASTM C942, 1090, 191, 78, 469 modified Sonneborn; "Ferrolith G-D.S. Redi-Mixed" Sika Top SikaTop 123 Plus; ASTM C157, C138, C109, C CONCRETE Sakrete High strength, ASTM C387 Quikrete Ready-to-use, ASTM C CASING SPACERS AND SEALS CASING SPACERS FOR WATER Ford Uni-flange Casing Spacers, ASTM A536, AWWA A21.11 APPLICATIONS Raci Spacers North America Raci casing spacers, ASTM D638, ASTM D2240, ASTM 149/64 Cascade Waterworks Mfg Model CCS (ss casing spacer), ASTM D149-61, ASTM B117 PSI Model S, 304 stainless steel bands, EPDM CASING SPACERS FOR WASTEWATER Raci Spacers of North America Raci casing spacers, ASTM D638, ASTM D2240, ASTM 149/64 APPLICATIONS Cascade Waterworks Mfg CCS (ss casing spacer), ASTM D149-61, ASTM B117 PSI PSI, Model S or the Adjusta-Spacer CASING SEALS Cascade Waterworks Mfg Model CCES rubber end seal. ASTM D149-61, ASTM B117 Canusa-CPS Casing Kit CSK, PSI, model C, W Model C and W, ASTM D149-61, ASTM B117, ASTM D638 Page 1 of 5
3 MATERIAL 106 MISCELLANEOUS FOAM INSULATION DOW Styrofoam Highload 100, ASTM C518, C177, ASTM D1621, Amoco Foam Products Owens Corning Amofoam-RCY, ASTM D1621, ASTM C203 Foamular 400 or 404, ASTM C578 Type VI DOW Dow Corning 748 Non-Corrosive Sealant, ASTM D412, D150, UTILITY MARKERS (See section ) 3M Electronic Marker Systems (EMS), 200 SERIES - WATER SYSTEM 201 PIPE AND FITTINGS DUCTILE IRON PIPE (DIP) DUCTILE IRON FITTINGS, American Ductile Iron Pipe Co. AWWA C151, up 12": PC 350, over 12": PC 250 U.S. Pipe & Foundry Co. AWWA C151, up 12": PC 350, over 12": PC 250 McWane Cast Iron Pipe AWWA C151, up 12": PC 350, over 12": PC 250 Tyler Star SIP Sigma Griffin Pipe Products Company U.S. Pipe & Foundry Co. Romac POLYVINYL CHLORIDE (PVC) PRESSURE CertainTeed Corporation AWWA C900 only, PC 305, DR 14, NSF 61, ASTM F477 PIPE Diamond Plastics Corporation AWWA C900 only, PC 305, DR 14, NSF 61, ASTM F477 JM Eagle AWWA C900 &C905, PC 305, DR 14, NSF 61, ASTM F477 Vinyl Tech AWWA C905: 16" only, PC 305, DR14, NSF 61, ASTM F477 North American Pipe Corp. AWWA C900 &C905, PC 305, DR 14, NSF 61, ASTM F POLYVINYL CHLORIDE FITTINGS Romac Industries Inc Restrained Flanged Coupling Adapter for PVC pipe, ASTM A LOCK JOINT PIPE U.S. Pipe & Foundry Co. AWWA C151, TR-FLEX (4"-24"), HP LOK (30-64"), for DIP North American Pipe Corp Certa-Lok, NSF 61, ASTM D3139, F477, AWWA C605, for PVC JM Eagle Eagle Loc 900 Internal Joint Restraint, AWWA C900, for PVC Diamond Plastics Corporation Diamond Lok-21, C900 & C905, NSF 61, ASTM D3139, for PVC. Underground Solutions Fusible C900 (PVC), ASTM D1599, D638, NSF VALVES TAPPING VALVES (Resilient Seat, FL/MJ) American AVK AWWA C509, Open RT, Full Port, Series 45 & 55 American Flow Control AWWA C509, Open RT, Full Port, Series 2500 RW Co. AWWA C509, Open RT, Full Port Kennedy AWWA C509, Open RT, Full Port U.S. Pipe & Foundry CO. AWWA C509, Open RT, Full Port RESILIENT SEATED GATE VALVES (with American AVK AWWA C509 Series 25, or AWWA C515 Series 45, (up to 12") EPDM Rubber & MJ/MJ) American Flow Control Series 2500, AWWA C515, Opens RT, (up to 12") Co. AWWA C509, Open RT, model A2360, (up to 12") U.S. Pipe & Foundry CO. AWWA C509, or C515, Open RT, Metroseal 250, (up to 12") Clow Valve Company AWWA C509, F-6100, AWWA C515, Open RT, (up to 12") Double-Disc Gate Valves AWWA C509, Open RT, A-2050, (up to 12") Clow Valve Company AWWA C509, AWWA C515, Open RT, (up to 12") Valve Boxes (Class 35) Tyler Union Series 6860 w/ #6 base & drop lid or; Series 6850 w/ drop lid East Jordan Iron Works ASTM A48, AWWA M44, series 6800 and 8560 w/ drop lid Castings Inc. ASTM A48, AWWA M44, 6860 Series Star ASTM A48, AWWA M44, VB-0006 Series Sigma Models: VB630, VB261-8,and VB791-5 for curb stop service box Valve Box Adaptors Adaptor Inc. Valve Box Adaptor II Butterfly Valves Henry Pratt Company Groundhog, AWWA C504,304 SS Shaft, Interior Epoxy coated Clow/ M&H AWWA C504,304 SS Shaft, Series 4500 Co. AWWA C504,304 SS Shaft, Lineseal III or XP Valmatic AWWA C504,304 SS Shaft, Series 2000 (FL), or Series 2100 (MJ) Crispin Valves AWWA C504, 304 SS shaft, K-Flo Series 500 & Series 47 DeZurick AWWA C504,304 SS Shaft, Page 2 of 5
4 MATERIAL Extended Operators Limitorque MDT Valmatic EIM Air Relief Valves DeZurick Apco AWWA C512, ANSI 61 Valmatic AWWA C512, ANSI 61 ARI AWWA C512, ANSI 61 Crispin Valves AWWA C512, ANSI 61, C series & AL series Vent-O-Mat AWWA C512, ANSI Pressure Reduction Valves Cla-Val Co. Model 90G-01KC, ANSI 61, AWWA C Check Valves NOTE: Distribution system requires cushion check valves; on services, swing check valves are acceptable. Singer Cla-Val Company GA Industries Inc. American Darling ANSI 61, AWWA C530 Model or , ASTM A536 AWWA C508, NSF-61 AWWA C508, NSF JOINTS AWWA C508, NSF Bell-Spigot Restraint PVC Pipe EBAA Iron Sales Inc AWWA C900 PVC Pipe Bell Joint, Series 1500 AWWA C900/C905 PVC Pipe bell Joint, Series 1100 Sigma Corporation PV-Lok Series PWP for PVC Bell Joint Restraint AWWA C900 PVC Pipe Bell Joint, Series MECHANICAL JOINT RESTRAINT - PVC PIPE EBAA Iron Sales Inc Megalug Series 2000 PV, ASTM A536 DI, AWWA C600 Series 4000, for AWWA C900 & C905, ASTM A536 DI. Uni-Flange, Series 1500, for AWWA C900 & C905, Bell-Spigot Restraint DI Pipe All gaskets must be EPDM Rubber. Sigma Corporation EBAA Iron Sales Inc One-Lok SLCE Series, for both C900/C905 and ASTM D2241 Uni-flange Series 1390 Series (for New and Existing Installations) Series 3100S (on existing pipe) & Series 3100P (New Installation) Series 100HD Split (Existing Installation) & 1700 (New Installation) Sigma Corporation One-Lok SLDEH Series bell joint restraint for DIP (3"-36") Mechanical Joint Restraint DI Pipe American U.S. Pipe & Foundry CO. EBAA Iron Sales Inc Fastgrip Gasket, AWWA C111 Field Lok Gasket, Megalug Series 1100, conforms to ANSI/AWWA C151/A21.51 StarGrip 3000 Series, conforms to ANSI/AWWA C111/A21.11 UFR 1400 Series Sigma Corporation One-Lok SLDE Series restraint for DIP (3"-36") RESTRAINED JOINT - PVC Romac RomaGrip EBAA Iron Sales Inc Megalug Restraining System 2000, 4000 Series, ASTM F-1674 Sigma Corporation Buster Series 1300, 1500, or 1390-C Series PV-Lok Series PWM Restraint, for PVC pipe to DI fittings Series 1100 and Series 4000, per ASTM A536 North American Pipe Corp Certa-Lok, for AWWA C900 & C905, ASTM D3139. Diamond Plastics Corp Diamond Lok-21, for AWWA C900 & C905, ASTM D3139. JM Eagle Eagle Loc 900, for AWWA C900 & C905, ASTM D RESTRAINED JOINTS DIP Pipe US Pipe MJ Field-Lok gasket for DIP, NSF 61, Stargrip Series 3000 for DIP, ASTM A536 American Flex-Ring Joint Pipe, AWWA A21.51 US Pipe TR Flex, AWWA A MECHANICAL JOINTS FOR STEEL PIPES Dresser Piping specialties Style 38 coupling Romac Industries Inc Styles XR501, 501 & Alpha, Smith-Blair Inc JCM Industries Model 411 coupling, AWWA C219 Model 212 coupling, ASTM A536, NSF61 Page 3 of 5
5 MATERIAL 204 WATER SERVICES TAPPING SADDLES PowerSeal Model 3407 (for DIP or PVC), NSF 61 Romac Industries Inc Style 202B (for DIP or PVC) Series 3825, Bronze double strap, (for DIP only) Style 202B (for DIP only) Co. Series BR2B (for DIP only), NSF CORPORATION STOPS CURB STOPS - 3/4 " AND 1" CURB STOPS - 1 1/2" CURB STOPS - 2" Co. Co. 300 and B25000 series, conforms to AWWA C800 FB-600 Series, conforms to AWWA C Series, conforms to AWWA C800 B22 Series, AWWA C Series, AWWA C Series (Stop & Waste), AWWA C Series, AWWA C800 B22 Series, AWWA C Series, AWWA C Series, AWWA C800 B22-777M series, AWWA C Series, AWWA C Curb Stop Boxes - 3/4" and 1" 300 Series, AWWA C800 Catalog # H Catalog # EM , Pattern Curb Stop Boxes - 1 1/2" and 2" Tyler Box # 95E Catalog # H Catalog # EM Pattern Service line Couplings for Copper (Compression only - with Grip Tite rings) C22 Series, AWWA C800, NSF61. Model H15400N Series Stop and Waste Valves Model # Z22-333SW and Z22-444SW Model # H Model # Meter Setters - 3/4" and 1" (with integral outlet spring check valve) Ford Series VB72, AWWA C800 Series 737-2, AWWA C800 Series B2489N-2, AWWA C800 Romac Style XR501 Extended Range Coupling, NSF 61, Meter Setters - 1 1/2" and 2" 205 CORROSION PROTECTON Post Mounted Test Stations Ford Gerome Manufacturing Company Series VBB7, AWWA C800 Series 720, AWWA C800 Series B2423, AWWA C800 Testox 700 Series (1 ¼ Threaded) Spray Primer Chase Corp. Royston Roybond Weld Caps Chase Corp. Chase Corp. Canusa-CPS Canusa-CPS Royston Handy Cap Tapecoat H35, Gray Melt stick (MS) Coating Repair Patch (CRP) Heat Shrink Sleeves Canusa-CPS Heat-shrinkable sleeves Steel Pipe Coatings ITW Futura Coatings Protec II, ASTM G 95 LifeLast, Inc. Durashield 210, NSF Polyethylene Encasement Trenton Corp. Denso Northtown Company Mountain States Plastics Trumbull Industries Primer and Wax Tape Primer and Wax Tape Polywrap, ANSI/AWWA C105/A21.50 Polywrap, ANSI/AWWA C105/A21.50 Polywrap, ANSI/AWWA C105/A21.50 Page 4 of 5
6 MATERIAL Polyvinyl Chloride Tape Protection Engineering Polyken #900 3M Company Scotchwrap Tape #50 Ferguson ProFlo, ASTM D OTHER Fire Hydrants (Safety Yellow per AWWA C502) Co American Flow Control Super Centurion 250 A423 Waterous Pacer WB Clow Valve Company Medallion F Foster Adaptor INFACT Corp Foster MJ restraint Adaptor, NSF Swivel Adapters Tyler Union Swivel Adapter, ASTM C111 Sigma Corporation Swivel Adapter, ASTM C111 Romac Industries Inc Swivel Adapter, ASTM C111 Star Swivel Adapter, ASTM C Meter Pits Oldcastle Enclosure Solutions Models: 0020 & 0024, w/ CI cover & plastic frost lid, ASTM A DOUBLE DETECTOR CHECK VALVES Wilkins AWWA C510,UL/FM,USC - Model 350DA (4"-10") OSY (4" - 10" only) Watts Regulatory Co. AWWA C510, UL/FM, USC - Model 709 or 774 DCDA-OSY FEBCO Ames Company, Inc Ames Company, Inc AWWA C510, UL/FM, USC - Model 856, 876V DDCV-OSY AWWA C510, UL/FM, USC - Model COLT C300 OSY AWWA C510, UL/FM, USC - Model 3000SS-OSY DOUBLE DETECTOR CHECK VALVES Watts Regulatory Co. AWWA C510, UL/FM, USC - Series 007DCDA (2" DDCVs only, for fire BF prevention) Ames Company, Inc AWWA C510, UL/FM, USC - Model 3000B, 300 SERIES - SANITARY SEWER SYSTEM 301 PIPE Wilkins/Zurn Co. AWWA C510, UL/FM, USC, Model 950 LXLTDA, DUCTILE IRON U.S. Pipe with Polybond Lining DIP with Polybond Lining, ASTM G-95 & B-117 American Ductile Iron Pipe Co. DIP with Polybond lined pipe, or Polybond Plus lining, ASTM B PVC IPEX, Inc ASTM D3034-SDR35 (4"-15"), ASTM F679 (18"-27"). J-M Eagle ASTM D3034-SDR35 (4"-15"), ASTM F679 (18"-27"). Diamond ASTM D3034-SDR35 (4"-15"), ASTM F679 (18"-27"). Vinyl Tech ASTM D3034-SDR35 (4"-15"), ASTM F679 (18"-27"). North American ASTM D3034-SDR35 (4"-15"), ASTM F679 (18"-27"). 400 SERIES - STORM SEWER All rubber gaskets and seal material shall be made of EPDM Rubber, including PVC pipe joint gaskets. The Engineer's review and approval of this document, submitted in lieu of standard shop drawings, in no way relieves the Contractor of the responsibility to provide to Aurora Water materials which conform to all material specifications recorded in the latest edition of the Aurora Water Standards and Specifications. The Engineer's review and approval of this document shall be only for conformance with the design concept of the project and shall not extend to means, methods, techniques, sequences, or procedures of construction. The Engineer's approval shall not relieve the Contractor from the responsibility for deviations, errors, or omissions in the shop drawings. For necessary materials not listed, the Contractor shall be required to submit standard shop drawings in accordance with Aurora Water Standards and Specifications, latest edition. Contractor:... Date: Page 5 of 5
7 PROCEDURE FOR PRODUCT APPROVAL 1. Contractors, suppliers and manufacturers desiring to submit products for approval and inclusion in these Standards shall submit materials detailed below to the Aurora Water Warehouse at E. Ellsworth Ave., Aurora CO Contractors, suppliers and manufactures wishing to visit warehouse supervisor in person shall first request an appointment by calling (303) The City will complete its review within 90 days. Contractors, suppliers and manufacturers desiring to appeal the decision of the review committee shall submit an appeal to the Manager of Aurora Water Engineering within 30 days after the final decision by the review committee. 3. Aurora Water shall review the appeal and render a decision within 30 days. The decision of the Director will be final. 4. Contractors, suppliers and manufacturers desiring to submit materials for approval and inclusion in these Standards shall submit the following minimum information: a Manufacturer's standard drawings, schematics and diagrams: i ii iii iv v vi vii viii ix x Description of the material or equipment for which the supplier or manufacturer desires to be considered. Delete information not applicable to the submittal. Supplement standard information to provide information specifically applicable to the material or equipment. Detailed operation and maintenance and disassembly information for maintenance if applicable. Applicable standards, such as ASTM or Federal Specification numbers. Manufacturer s name, type and model number of equipment. Drawings, catalogs or parts thereof, manufacturer's specifications and data, instructions, performance characteristics and capacities, and other information specified or necessary. Parts, devices, controls and accessories forming a part of equipment. Descriptive literature for paint and coating systems. Description of where parts may be ordered and anticipated time for delivery of parts. Appendix B: Approved Products List 12 January 2012
8 b c Manufacturer's warranties. Format. i ii iii iv v vi Present in a clear and thorough manner. Minimum sheet size: 8 1/2"x11". Clearly mark each copy to identify pertinent products and models. Individually annotate standard drawings which are furnished, cross out items that do not apply, describe exactly which parts of the drawing apply to the equipment being considered. Individually annotate catalog sheets to identify applicable items. Clearly identify the Supplier and Manufacturer along with addresses, telephone number and person to contact for additional information. Appendix B: Approved Products List 13 January 2012
SOUTH ADAMS COUNTY WATER & SANITATION DISTRICT APPROVED CONSTRUCTION MATERIALS LIST January 27, 2017
The manufacturers and materials listed in this document are to be explicitly used on all potable water, irrigation and sewer utility construction within the South Adams County Water and Sanitation District
More informationAPPROVED MANUFACTURERS PRODUCTS FOR WATER SYSTEMS 2017 PRODUCT SPECIFICATIONS MANUFACTURER DESCRIPTION/MODEL CASING. Power Seal
CASING Stainless Steel Body Advance Products & SI or SSI SPACERS Systems / Model 4810 COUPLINGS Watermain Pipe Epoxy Coated Krausz HyMax (AC Pipe) HyMax Grip (PVC/Steel) Ductile Iron / Model 3501 AWWA
More informationCity of Regina Standard Construction Specifications APPROVED PRODUCTS LIST
Standard Construction Specifications APPROVED PRODUCTS LIST Requests for alternate products may be submitted to: Development Services City Planning and Development Division Queen Elizabeth II Court 2476
More informationGENERAL PROVISIONS OF THE SPECIFICATIONS MATERIALS SPECIFICATION LIST
GENERAL PROVISIONS OF THE SPECIFICATIONS MATERIALS SPECIFICATION LIST General Note: All material that comes in contact with potable water shall be lead free to the extent defined in California Assembly
More informationAPPENDIX 3. Approved Materials List. Township of King Design Criteria and Standard Detail Drawings
APPENDIX 3 Approved Materials List List of Acceptable Materials Approved Water System Materials Pipe Mainline: Polyvinyl Chloride (PVC) pipe manufactured to AWWA C900, Class 235, DR18. Molecularly Oriented
More informationSITE WATER UTILITY DISTRIBUTION PIPING
PART 1 GENERAL 1.1 SUMMARY A. Section Includes: 1. Pipe and fittings for potable water line and fire water line. 2. Valves and Valve Boxes 3. Fire Hydrants. 4. Tapping Sleeves and Valves. 5. Air Release
More informationSECTION BUTTERFLY VALVES
SECTION 15112 BUTTERFLY VALVES PART 1 GENERAL 1.01 SUMMARY A. All butterfly valves shall be of the tight closing, rubber seated type and fully comply with the latest revision of AWWA Standard C504, Class
More informationApproved Products Listing
Approved Products Listing Arlington Water Utilities REVISED: 11/19/2018 FOR WATER DISTRIBUTION USE C6, C7, C8 CASING SPACERS AND END SEALS STAINLESS STEEL WITH GLASS FILLED POLYMER PLASTIC RUNNERS END
More informationINFACT CORPORATION WATERWORKS PRODUCTS FLEX T-2 SPECIFICATION S TOLL FREE:
CORPORATION WATERWORKS PRODUCTS T-2 SPECIFICATION S TOLL FREE: 888-773-9130 email: info@infactcorp.com www.infactcorp.com T-2 Valve and Fitting Restraint Lower total installed cost No couplings, no pipe
More informationBus Facility
SECTION 22 11 13 PART 1 - GENERAL 1.01 SECTION INCLUDES A. Water-distribution piping and related components outside the building for water service, fire-service mains, and combined water service and fire-service
More informationSection GATE VALVES
Section 02521 PART 1 GENERAL 1.01 SUMMARY This Section includes the furnishing and installation of gate valves for isolation and dead-end service as shown on Plans and as specified herein. 1.02 MEASUREMENT
More informationSECTION VALVES AND APPURTENANCES
SECTION 15110 VALVES AND APPURTENANCES PART 1 - GENERAL 1.01 DESCRIPTION A. Work Specified The work specified shall include all labor, material, equipment, services and incidentals necessary to furnish
More informationHomestead Series 820 AWWA Butterfly Valves
Homestead Series 820 AWWA Butterfly Valves Dependable Valves for Water & Wastewater Service BODY: The ductile iron body meets or exceeds the design strength requirements of the AWWA C504 standards. Flange
More informationFord Service Saddles and Tapping Sleeves
Section AA 5/2001 Ford Service Saddles and Tapping Sleeves The Ford Meter Box Co., Inc. 775 Manchester Avenue, P.O. Box 443, Wabash, Indiana, USA 46992-0443 Telephone: 219/563-3171 FAX: 1-800-826-3487
More informationAmerican-BFV. Copyright 2008 Val-Matic Valve & Mfg. Corp 1
Copyright 2008 Val-Matic Valve & Mfg. Corp 1 History Designed and introduced by American-Darling in 1972 American-Darling repositioned and the valve was taken off the market in 1996 Butterfly Valve line
More informationLARGE R/W GATE VALVES
The original, and the definitive standard. LARGE R/W GATE VALVES 24 THROUGH 54 STYLE 7000 AWWA C515 250 PSI NSF 61 Certified Fusion Bond Epoxy Coated 10 Year Limited Warranty M&H Valve is a division of
More informationNORTHWESTERN UNIVERSITY PROJECT NAME JOB # ISSUED: 03/29/2017
SECTION 33 1000 - WATER DISTRIBUTION PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions and Division 01 Specification
More informationSECTION PIPING, FITTINGS, AND APPURTENANCES
SECTION 15050 PIPING, FITTINGS, AND APPURTENANCES PART 1 - GENERAL 1.01 SUMMARY A. Section Includes: Furnish and install all piping, including fittings, valves, and accessories as shown on the Drawings,
More informationTHE MOST ADVANCED NAME IN WATER MANAGEMENT SOLUTIONS THE LATERAL CONNECTION SOLUTION
THE MOST ADVANCED NAME IN WATER MANAGEMENT SOLUTIONS THE LATERAL CONNECTION SOLUTION FITS ANY MAINLINE OR STRUCTURE Stainless Steel Band SPECIFICATIONS Rubber Sleeve Band Screw Housing Gasket ASTM F477
More informationSECTION WATER MAIN CONSTRUCTION
SECTION 02660 WATER MAIN CONSTRUCTION PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. New water mains and appurtenances. 2. Coordination and interface with existing facilities and utilities. 3. Connections
More informationSAN ANTONIO WATER SYSTEM I.H. 10 Ground Storage Tank Rehabilitation and Painting Project SAWS Job No Solicitation No.
SAN ANTONIO WATER SYSTEM I.H. 10 Ground Storage Tank Rehabilitation and Painting Project SAWS Job No. 13-0118 Solicitation No. B-16-014-GC September 1, 2016 TO BIDDER OF RECORD: The following changes,
More informationKENNEDY AWWA C515 RESILIENT WEDGE GATE VALVES (2000)
KENNEDY AWWA C515 RESILIENT WEDGE GATE VALVES (2000) During the decade of the 1980 s the waterworks industry was introduced to the Resilient Seated Gate Valve, ad design principal that is dominate in preference
More informationB. Utility-furnished products include water meters that are furnished to the site, ready for installation.
SECTION 211100 - FACILITY FIRE-SUPPRESSION WATER-SERVICE PIPING PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions
More informationAmerican Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM
American Society of Sanitary Engineering PRODUCT (SEAL) LISTING PROGRAM ASSE STANDARD #1048 - REVISED: 2009 Double Check Detector Fire Protection Backflow Prevention Assemblies Separate, complete laboratory
More informationRated to the New, Higher Pressure Classes in Latest Editions of AWWA C900 and C909. Joint Restraint Products INFORMATION FEATURES & ADVANTAGES
Pipe Restrainers series 1000G2 1000G2C Restrainers for AWWA CI OD C900/C909 PVC/PVCO Pipe with MJ or Ductile Iron Push-On Fittings (Formerly Series 9000) INFORMATION Second Generation (Gen 2) PVC Restrainers
More informationTeam Insert Valve Sample Specification The Insert Valve shall conform to the following:
Team Insert Valve Sample Specification The Insert Valve shall conform to the following: The Ductile Iron 250 p.s.i.g. Insert Valve shall be a Resilient Wedge Gate Valve designed for use in potable water,
More informationConsult with manufacturers concerning permeation of the pipe walls, jointing materials, valve seats, etc.
Design Manual Chapter 4 - Water Mains 4C - Facility Design 4C-1 Facility Design A. General Water mains and appurtenances, including hydrants and valves, should be provided along all streets including connections
More informationPVC FASTTAP SADDLES for IPS Mains. Main Size OUTLET 1 FPT 3/4 CTS (7/8 OD) COMPRESSION 1 CTS (1 1/8 OD) COMPRESSION 3/4 IPS COMPRESSION
PVC FASTTAP SADDLES PVC FASTTAP SADDLES for IPS Mains THE ULTIMATE CONNECTION OUTLET 3/4 IPS FEMALE SLIP OR 1 IPS MALE SLIP SOLVENT WELD 1 IPS FEMALE SLIP SOLVENT WELD 3/4 MPT 1 MPT 3/4 FPT MAIN 13/16
More informationAWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
More informationCPVC Transition Fittings - Female Adapter. CPVC X LEAD FREE BRASS Lead Free Max working pressure F ASTM D 2846
CPVC Transition Fittings - Female Adapter STD4703BTLF12 1/2 CPVC X 1/2 FIP 25 250 CPVC Transition Fittings - Female Adapter STD4703BTLF34 3/4 CPVC X 3/4 FIP 25 250 CPVC Transition Fittings - Female Adapter
More informationGAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS
GAS DISTRIBUTION PRODUCTS TRANSITION FITTINGS CONTINENTAL INDUSTRIES, INC. The Ultimate Connection CONTINENTAL INDUSTRIES, INC. ABOUT US THE ULTIMATE CONNECTION Our Company Continental Industries, Inc.,
More informationSTANDARDS AND CONSTRUCTION SPECIFICATIONS MANUAL
STANDARDS AND CONSTRUCTION SPECIFICATIONS MANUAL GENERAL INFORMATION Pages 1 SECTION ONE- WATER Pages 2 through 6 SECTION TWO- WASTERWATER Pages 7 through 12 WATER CATEGORY 1 OF 7: VALVES AND ACCESSORIES
More informationSUPPLEMENTARY SECTION: STANDARD SPECIFICATION PAGE 1 WATER MAINS MAY 2017
STANDARD SPECIFICATION PAGE 1 WATER MAINS MAY 2017 PART 1 GENERAL... 3 1.1 Work Included... 3 1.2 Related Sections... 3 1.3 Reference Standards... 3 1.4 Shop Drawings... 7 1.5 Certificates... 8 1.6 Handling
More informationSECTION DOMESTIC WATER PIPING
PART 1 - GENERAL 1.1 RELATED DOCUMENTS A. Drawings and general provisions of the Contract, including General and Supplementary Conditions Specification Sections, apply to this Section. B. Related Sections
More informationHorizontal Bladder Tanks
DATA SHEET Horizontal Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More information22. Specialty Valves.
22. Specialty Valves. a. Types of Specialty Valves. 1) Use of the following specialty valves is covered in this section: Altitude Valve, Pressure Reducing Valve, Pressure Relief Valve, Swing Check Valve,
More informationVertical Bladder Tanks
DATA SHEET Vertical Bladder Tanks Features UL Listed and FM Approved for use with various ANSUL proportioners and foam concentrates 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationModel MTB-ASME Horizontal Bladder Tanks
DATA SHEET Model MTB-ASME Horizontal Bladder Tanks Features n UL Listed and FM Approved for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure
More informationIAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC PURPOSE
INTERNATIONAL ASSOCIATION OF PLUMBING AND MECHANICAL OFFICIALS IAPMO GUIDE CRITERIA FOR BALL VALVES IAPMO IGC 157-20067 1 PURPOSE 1.1 The purpose of this standard is to establish an acceptable standard
More informationContinental Industries TRANSITION FITTINGS or FAX Visit
Continental Industries TRANSITION FITTINGS 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationTECHNICAL DATA. Trimpac 244a. September 16, 2013
September 16, 2013 Trimpac 244a 1. DEsCrIpTION DESCRIPTION TRIMPAC Model B-1 and B-1B is a factory-assembled trim package with an electric release module in a metal enclosure. The standard trim normally
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-33 11 00 (February 2018) ----------------------------- Preparing Activity: NAVFAC Superseding UFGS-33 11 00 (May 2016) UNIFIED FACILITIES GUIDE SPECIFICATIONS References
More informationIN-PLANT VALVES. Serving the Water & Waste Water Industry Since Clow Valve is a division of McWane, Inc.
Serving the Water & Waste Water Industry Since 1878 IN-PLANT VALVES Clow Valve is a division of McWane, Inc. www.clowvalve.com AUTOMATION MORIN ACTUATOR DESCRIPTION: The Morin Actuator is a heavy-duty,
More informationSection 7 AMERICAN. Specials
Section 7 AMERICAN Specials AMERICAN Specials The principal standards relating to AMERICAN Specials are ANSI/AWWA C110/A21.10, C151/A21.51, and C153/A21.53. These and other standards are referenced throughout
More informationQuality Plastic Pipe Fittings. Technical Data. Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed
Quality Plastic Pipe Fittings Technical Data Fabricated PVC Fittings IPS Class 100, 125, 160, 200 SCH 40 & SCH 80 Solvent Weld & Gasketed Effective April 1, 2002 PIPE DIMENSIONS IPS-IRON PIPE SIZE Minimum
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationModel MTB-ASME Vertical Bladder Tanks
DATA SHEET Model MTB-ASME Vertical Bladder Tanks Features n UL Listed for use with various proportioners and foam concentrates n 175 psi (12.1 bar) maximum allowable working pressure (design pressure)
More informationKlassikDrain Section. Technical Handbook and Product Catalog. General purpose trench drainage
Technical Handbook and Product Catalog Surface Drainage 6 Surface drainage options 8 Product selection 10 Trench drain hydraulics 16 Loadings 22 Material data 24 End user requirements Standard Products
More informationMODEL 2638 AWWA C515 REDUCED WALL DUCTILE IRON
MODEL 2638 AWWA C515 REDUCED WALL DUCTILE IRON NOTE: It is recommended that valves be installed with stems vertical when used in raw sewage or sludge applications or in water with excessive sediment. 2638-166
More informationMaterials Testing and Inclusion Procedures
Approved Materials List for Water Production System Materials Testing and Inclusion Procedures s who would like materials considered for the approved materials list shall: 1. Comply with all the design
More informationWELL COMPLETION & PROTECTION. www. .com MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD
WELL COMPLETION & PROTECTION MINERAL EXPLORATION ENVIRONMENTAL GEOTECHNICAL GEOTHERMAL ROTARY SONIC HDD www..com WELL COMPLETION & PROTECTION TABLE OF CONTENTS TABLE OF CONTENTS (FLUSHMOUNTS)... 2-5 MONITORING
More informationWaterSource Heat Pump Hose Kit Performance Specification-Summary
WaterSource Heat Pump Hose Kit Performance Specification-Summary AUTOMATIC & MANUAL BALANCING HOSE KITS Contractor shall provide and install Hays Hose Kits. Each kit, shall include a Hays 2500 Series Mesurflo
More informationSPECIFICATIONS - DETAILED PROVISIONS Section Butterfly Valves C O N T E N T S
SPECIFICATIONS - DETAILED PROVISIONS Section 15103 - Butterfly Valves C O N T E N T S PART 1 - GENERAL... 1 1.01 REQUIREMENT... 1 1.02 VALVE MANUFACTURER... 1 1.03 GUARANTEE... 1 PART 2 - PRODUCT... 1
More information1 Exam Prep. Questions and Answers
Part 1 1 Exam Prep Standard for Polyvinyl Chloride Pressure Pipe ANSI/AWWA C900-07 Questions and Answers 1. Which of the following statement is not a correct statement? A. A DR is the average O.D. divided
More informationInstallation, operation & maintenance manual - original version
Installation, operation & maintenance manual - original version AVK gate valves for water and wastewater Series 01, 02, 06, 12, 15, 18, 20, 26, 32, 33, 36, 38, 50, 55 and 636 COPYRIGHT AVK GROUP A/S 2018
More informationTECHNICAL DATA. Trimpac 251a. Spetember 16, 2013
Spetember 16, 2013 Trimpac 251a 1. DEsCrIpTION DESCRIPTION TRIMPAC Model B-6 and B-6B is a factory assembled trim package for a double interlocked preaction system with an electric/pneu-lectric release
More informationRESILIENT SEATED GATE VALVES FOR WATER & WASTEWATER INDUSTRY RESILIENT SEATED GATE VALVES & AWWA BUTTERFLY VALVES
RESILIENT SEATED GATE VALVES & AWWA BUTTERFLY VALVES For Water Wt And Ad Wastewater t Industry 1 2 RESILIENT SEATED GATE VALVES FOR RESILIENT SEATED GATE VALVES 3 Company Profile Vahn-Tech International
More informationUNIFIED FACILITIES GUIDE SPECIFICATIONS
USACE / NAVFAC / AFCEC / NASA UFGS-33 11 00 (May 2016) Change 1-08/17 ----------------------------- Preparing Activity: NAVFAC Superseding UFGS-33 11 00 (February 2011) UNIFIED FACILITIES GUIDE SPECIFICATIONS
More informationSUBMITTAL NOTES PROJECT: Ross Model 50RWR-A Pilot Operated Surge Relief Valve with Hydraulic Anticipation. Size: inch / mm
SUBMITTAL NOTES PROJECT: Ross Model 50RWR-A Pilot Operated Surge Relief Valve with Hydraulic Anticipation Size: inch / mm Every Ross Valve shall be hydrostatically tested for body integrity and tight seating
More informationTECHNICAL DATA. TRIMPAC Model B-5 & B-5B
September 16, 2013 Trimpac 250a 1. DESCRIPTION DEsCRIPTIoN is a factory assembled trim package for a ed an electric/pneumatic release module in a metal enclosure. The standard trim normally required on
More informationSECTION N SPECIAL EQUIPMENT SPECIFICATIONS
SECTION N SPECIAL EQUIPMENT SPECIFICATIONS SECTION N SPECIAL EQUIPMENT SPECIFICATIONS Item 570 Item 571 Item 572 Item 573 Gate Valves Air Release and Combination Air & Vacuum Valves Butterfly Valves Plug
More informationPIPE, VALVE & FITTING
1. 2. 3. 4. Steel Pipe 1.1. Sch. 40 Black T&C 1.2. Sch. 40 Black PE 1.3. Sch. 80 Black PE 1.4. Sch. 40 Galvanized PE Threaded Steel Fittings 2.1. Sch. 40 Black Fittings 2.2. Sch. 80 Black Fittings 2.3.
More informationSERIES CVII AWWA C508 RUBBER FLAPPER CHECK VALVES 2-24
SERIES CVII AWWA C508 RUBBER FLAPPER CHECK VALVES 2-24 508-103 Dec 2017 Rubber Flapper Check Valves to AWWA C508 SIMPLE ROBUST DESIGN With only a single moving part there are no packings, o-rings, hinges,
More informationIAPMO IS PUBLIC REVIEW DRAFT Thrust Blocking for Rubber Gasketed and Solvent Cement Joints
IAPMO IS 33-2019 PUBLIC REVIEW DRAFT Thrust Blocking for Rubber Gasketed and Solvent Cement Joints IAPMO Standard IAPMO IS 33 2019 Published: Month Year Published by International Association of Plumbing
More informationMIDDLESEX COUNTY COLLEGE EDISON, NJ LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS
MIDDLESEX COUNTY COLLEGE EDISON, NJ 08818 LOCAL SUPPLIER BLANKET ORDER SPECIFICATIONS The College is soliciting bids to award a Local Supplier Blanket Order agreement for the purchase of supplies for the
More informationStandards Manager Web Standards List AWWA-American water works association
Standards Manager Web Standards List AWWA-American water works association Id Number Title Year Organization Page 1 B600 Powdered Activated Carbon 2016 AWWA 2 B603 Permanganates 2016 AWWA 3 C904 Cross-Linked
More informationMODEL 2638 AWWA C515 REDUCED WALL DUCTILE IRON
MODEL 2638 AWWA C515 REDUCED WALL DUCTILE IRON NOTE: It is recommended that valves be installed with stems vertical when used in raw sewage or sludge applications or in water with excessive sediment. 2638-166
More information2016/2017 Product Catalog
Your knowledgeable and trusted partner for the best in water management solutions 2016/2017 Product Catalog Commercial Stormwater Management Residential Stormwater Management Professional Irrigation Flow
More informationCITY OF ROSEVILLE DESIGN AND CONSTRUCTION DETAILS
CITY OF ROSEVILLE DESIGN AND CONSTRUCTION DETAILS Trench Backfill Utility Trench Paving Backfill and Embedment TB 1 HDPE, SRHDPE & PVC Storm Drain Pipe Only (Nonrigid) Bedding and Backfill TB2 Deep Cut
More informationREPAIR ACCESSORIES. Part Number Qty Description. ZTCBV /8 MIP X 1/4 FIP Leaded Brz Test Cock. TCBV012LF 1 1/8 MIP X 1/4 FIP Lead Free Test Cock
REPAIR ACCESSORIES ZTCBV02 /8 MIP X /4 FIP Leaded Brz Test Cock TCBV02LF /8 MIP X /4 FIP Lead Free Test Cock ZTCBV025 /4 MIP X /4 FIP Leaded Brz Test Cock TCBV025LF /4 MIP X /4 FIP Lead Free Test Cock
More informationDPS (C900) Price List - April 2016
DPS (C900) Price List - April 2016 Ductile Iron Bends (Cat. A) Ductile Iron Tees (Cat. A) Ductile Iron Reducers (Cat. A) Page 3 Page 4-5 Page 5-7 Plugs (Cat. A) Caps (Cat. A) LHD-Series Restraints (Cat.
More informationPIP PNSMV037 Bronze and Iron Butterfly Valve Descriptions
October 2017 Piping PIP PNSMV037 Bronze and Iron Butterfly Valve Descriptions PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice
More informationTECHNICAL DATA. Trimpac 257a. September 16, 2013
September 16, 2013 Trimpac 257a 1. DESCrIpTION DESCRIPTION The Viking Double SUREFIRE SIngle Interlock Preaction TRIMPAC Model D-2 and D-2B used with either a Model E or F Deluge Valve (A.1), a Viking
More informationContinental Industries STEEL SERVICE TEES or FAX Visit
Continental Industries STEEL SERVICE TEES 1-800-558-1373 or FAX 1-800-788-1668 Visit www.conind.com ABOUT US Our Company Continental Industries, headquartered in Tulsa, Oklahoma, was formed in 1958 and
More informationpvc well casing & drop pipe
C e r t a i nte e d pvc well casing & drop pipe P V C We l l P r o d u c t s Sure Fit PVC well casing and drop pipe have gained broad acceptance since their introduction almost 40 years ago. Today, due
More informationTECHNICAL DATA. Trimpac 256a. October 31, 2013
October 31, 2013 Trimpac 256a 1. DESCRIPTION The Viking SUREFIRE SIngle Interlock Preaction TRIMPAC Model D-1 and D- 1B used with either a Model E or F Deluge Valve (A.1), a Viking Easy Riser check valve
More informationEcoflex pre-insulated pipe energy efficiency made easy
E c o f l e x C o m p l e t e Catalog Supplement June 2010 Hydronic heating, cooling and potable-water distribution Fast, easy installations Energy-efficient Flexible, durable Custom-cut, long lengths
More informationSECTION PRESSURE TESTING OF PIPING
SECTION 15044 PRESSURE TESTING OF PIPING PART 1 - GENERAL 1.01 DESCRIPTION A. Scope of Work: This section specifies the leakage and pressure testing of piping. B. Testing Records: PART 2 - PRODUCTS 2.01
More informationKENNEDY VALVE OPERATION & MAINTENANCE MANUAL
2 54 ROTATING DISC GATE VALVE OPERATION & MAINTENANCE MANUAL Rel. 5/27/16 1 TABLE OF CONTENTS 3 General 3 Receipt & Inspection 4 Gate Valve Storage & Handling 5 6 Installation 7 Operation 8 Field Testing
More informationR-3501-E2 R-3501-H4. R-3501-HL Mountable Curb Frame, Grate
For a complete listing of FREE OPEN AREAS and PERIMETERS of all grates, refer to pages 306-311. R-3501-D2A See pages 145-146-148 &155 for additional Roll Type products R-3501-D2A C 1.0 3.4 R-3501-E2 ROLL
More informationInstallation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
More information2010 STANDARD SPECIFICATIONS STANDARD DRAWINGS
CITY OF REDMOND, OREGON 2010 STANDARD SPECIFICATIONS STANDARD DRAWINGS TABLE OF CONTENTS SECTION 1 TRENCHES TITLE 1-1 Utility Trench 1-2 Water Line & Sewer Line Separation 1-3 RR X-ING Single/Joint Use
More informationPressure Regulating Valves. Models 44, 77 & 68 PS\ UL. Pressure Relief Valve. Dorot Fire Protection Division. Certification & compliance by design
Fire Protection Div. Dorot Fire Protection Division Models, & 6 PS\ UL Pressure Relief Valve Certification & compliance by design -PS\UL ANSI FCI - Class VI seat leakage class Fire tested to EN ISO 6-:6
More informationSupplement Catalog For. Marine/RV & Manufactured Housing
Supplement Catalog For Marine/RV & Manufactured Housing TABLE OF CONTENTS 0 Series Solvents and Roof Flashings...4 Polypropylene Tubular Products...6 300 Series PVC Pressure Pipe & Fittings... Nipples...12
More informationTelefon (+45) Telefax (+45)
Uni-Valve A /S VENTILER & INSTRUMENTER Telefon (+45) 43 43 82 00 Telefax (+45) 43 43 74 75 mail@uni-valve.com www.uni-valve.com UNI-S83 / S84 3/4-way ball valve Installation and Operating manual 3/4-WAY
More informationSABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company
CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN
More informationVertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
More informationSECTION SWIMMING POOLS
SECTION 13 1100 SWIMMING POOLS PART 1 - GENERAL 1.1 SUMMARY A. Section Includes: 1. Pool shell. 2. Pool mechanical system. 3. Pool heating system. 4. Interior pool finish. 5. Final testing and demonstration
More informationK&B Vault and Riser Closures
K&B Vault and Riser Closures K&B Vault Closures K&B Closures are strong, lightweight, and protect a wide variety of vault splice configurations with an air and water tight seal. K&B closures offer a full
More information1800CPB2 Service Regulators Maximum Inlet Pressure 125 PSIG
A C E D SB-8520.2 1800CPB2 Service Regulators Maximum Inlet 125 PSIG AMC Quality System QMI is Accredited by: C R E D I T ISO 9001 Certified Certificate #006697 R E ANSI RAB G I S T R A R Dutch Council
More informationJune For do-it-yourselfers as well as pros, Genova is the only way to go in home plumbing and vinyl building materials.
June 2018 R.F. Williams, Michigan Master Plumber, License No. 04287 (left) R.M. Williams, Michigan Master Plumber, License No. 05275 (right) In the late 1950 s, Robert F. Williams had the idea of utilizing
More informationValves, Valve Automation & Accessories
A DODSON GLOBAL COMPANY Valves, Valve Automation & Accessories Ball Valves One-Piece Standard Port Ball Valves 156 RT - Carbon 166 RT - Stainless / A216-WCB 1-pc. Reduced Port Ball Valve 266 FT-DM ISO
More informationBERMAD Waterworks. Level Control Valve with Altitude Pilot. 700 Series. Model X. Features and Benefits. Major Additional Features
Level Control Valve with Altitude Pilot High level reservoirs & water towers Energy cost critical systems Systems with poor water quality Inherent refreshing Level sustaining at reservoir outlet The Level
More informationTYPICAL CONTRACTION JOINT PLAN TYPICAL EXPANSION JOINT PLAN T LOCATION AND DETAIL OF JOINTS FOR SIDEWALK
CURB EXPANSION JOINTS (TYP) BOULEVARD 5 t /4 TOOLED EDGES EXPANSION JOINTS (TYP) CONTRACTION JOINTS (TYP) 2 m (TYP) BOULEVARD CURB EXPANSION JOINTS (TYP) EVERY 6 m PLAN TYPICAL CONTRACTION JOINT CURB 12
More informationWSC Performance Standard and Recommended Installation Procedures for Sanitary Water Well. Pitless Adapters, Pitless Units, And Well Caps
WSC Performance Standard and Recommended Installation Procedures for Sanitary Water Well Pitless Adapters, Pitless Units, And Well Caps History of the WSC PAS Standard he Water Systems Council (WSC) has
More informationHot Tapping Machine. OPERATIONS MANUAL and OPERATING INSTRUCTIONS
262-2040 Hot Tapping Machine For performing 1/4 6 Hot taps 285 psi or less. Municipal Water, Sewage, & Building Services Use OPERATIONS MANUAL and OPERATING INSTRUCTIONS WARNING: These instructions are
More informationApril For do-it-yourselfers as well as pros, Genova is the only way to go in home plumbing and vinyl building materials.
April 2019 R.F. Williams, Michigan Master Plumber, License No. 04287 (left) R.M. Williams, Michigan Master Plumber, License No. 05275 (right) In the late 1950 s, Robert F. Williams had the idea of utilizing
More informationPiece Weight. List Price. Basket Strainer-Plastic. Wash Tray Plug. TIP TOE Tub Drain. Shower Drain Grids
PLUMBING SPECIALTIES PS_1018 EFFECTIVE OCTOBER 1, 2018 (SUPERCEDES PS_0918) The issuance of this price list is not an offer to sell the goods listed herein at the prices stated. Bath Coupling Elbow 123-096
More informationFLANGED TWO-PIECE BALL VALVES
INTRODUCTION This instruction manual includes installation, operation, and maintenance information for FNW flanged split-body ball valves. This manual addresses lever operated ball valves only. Please
More information1800CPB2 Pilot-Loaded Service Regulators
1800CPB2 Pilot-Loaded Service Regulators Technical Bulletin www.elster-americanmeter.com Table of Contents 1800CPB2 Regulator Information................ 2-3 1800CPB2 Capacity Performance................
More information