SECTION 1: Identification of the substance/mixture and of the company/undertaking. SECTION 2: Hazards identification

Transcription

1 ID: FP09 I14 R02 Revision date: 01/10/2018 Version: D.2 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : VitalScreen Reagent 1 Product code : VITAL_1 GMDN : Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses Industrial/Professional use spec Use of the substance/mixture : For professional use only : Diagnostic kit for the in vitro determination of sperm vitality Uses advised against 1.3. Details of the supplier of the safety data sheet FertiPro N.V. Industriepark Noord Beernem Belgium info@fertipro.com 1.4. Emergency telephone number Emergency number : SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification according to Regulation (EC) No. 1272/2008 [CLP]Show CLP information + DPD classification in section 2.1 Not classified Adverse physicochemical, human health and environmental effects 2.2. Label elements Labelling according to Regulation (EC) No. 1272/2008 [CLP] No labelling applicable 2.3. Other hazards SECTION 3: Composition/information on ingredients 3.1. Substance 3.2. Mixture Name Product identifier % Classification according to Regulation (EC) No. 1272/2008 [CLP] Ultrapure water (CAS No) (EC no) Eosin (CAS No) (EC no) Sodium chloride (CAS No) (EC no) Sodium azide (CAS No) (EC no) (EC index no) Full text of H-phrases: see section Not classified 1-5 Not classified 0,1-1 Not classified < 0,1 Acute Tox. 2 (Oral), H300 Aquatic Acute 1, H400 Aquatic Chronic 1, H410 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). 01/10/2018 EN (English) ID: FP09 I14 R02 1/10

2 First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Assure fresh air breathing. Allow the victim to rest. : Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. : Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist. : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention Most important symptoms and effects, both acute and delayed Symptoms/injuries : Not expected to present a significant hazard under anticipated conditions of normal use Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Unsuitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand. : Do not use a heavy water stream Special hazards arising from the substance or mixture 5.3. Advice for firefighters Firefighting instructions Protection during firefighting : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. : Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel Emergency procedures For emergency responders Protective equipment Emergency procedures : Evacuate unnecessary personnel. : Equip cleanup crew with proper protection. : Ventilate area Environmental precautions Prevent entry to sewers and public waters Methods and material for containment and cleaning up Methods for cleaning up 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour Conditions for safe storage, including any incompatibilities Storage conditions Incompatible products Incompatible materials Storage temperature : 2-25 C 7.3. Specific end use(s) See instructions for use delivered with the device. : Keep only in the original container in a well ventilated place away from direct (sun)light. Keep container closed when not in use. Do not freeze. Do not use after expiry date. : Strong bases. Strong acids. SECTION 8: Exposure controls/personal protection 8.1. Control parameters : Sources of ignition. Direct (sun)light Exposure controls Appropriate engineering controls: Personal protective equipment: : Handle in accordance with good industrial hygiene and safety. Avoid all unnecessary exposure. : Wear fire/flame resistant/retardant clothing. 01/10/2018 EN (English) ID: FP09 I14 R02 2/10

3 Skin protection: Hand protection Eye/Face protection Respiratory protection : Complete suit protecting against chemicals, flame retardant antistatic protective clothing. The type of protection must be selected according to the concentration and volume of the dangerous substance at the specific workplace. : Wear protective gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to meet the specifications of EU-directive 89/686/EEC and the standard EN374 derived from it. : Face shield and safety glasses. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU). : Wear appropriate mask. Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). : Do not eat, drink or smoke during use. Do not pipette liquid using a mouth pipette SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Colour : Red. Odour : Odourless. Odour threshold ph Relative evaporation rate (butylacetate=1) Melting point Freezing point Boiling point Flash point Auto-ignition temperature Decomposition temperature Flammability (solid, gas) : Non flammable Vapour pressure Relative vapour density at 20 C Relative density Solubility : highly soluble in water. Log Pow Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidising properties Explosive limits 9.2. SECTION 10: Stability and reactivity Reactivity Chemical stability Stable after transport (max. 5 days) at elevated temperature ( 37 C). Stable for 24 months after date of manufacture Possibility of hazardous reactions Conditions to avoid Direct (sun)light. Extremely high or low temperatures Incompatible materials Strong acids. Strong bases. 01/10/2018 EN (English) ID: FP09 I14 R02 3/10

4 10.6. Hazardous decomposition products Carbon monoxide. Carbon dioxide. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitisation Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard Potential adverse human health effects and symptoms : Based on available data, the classification criteria are not met. SECTION 12: Ecological information Toxicity Persistence and degradability VitalScreen Reagent 1 Persistence and degradability Bioaccumulative potential VitalScreen Reagent 1 Bioaccumulative potential Mobility in soil Results of PBT and vpvb assessment Other adverse effects Avoid release to the environment SECTION 13: Disposal considerations Waste treatment methods Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Ecology - waste materials : Avoid release to the environment. SECTION 14: Transport information In accordance with ADR / RID / IMDG / IATA / ADN UN number Not regulated for transport UN proper shipping name Proper Shipping Name (ADR) Proper Shipping Name (IMDG) Proper Shipping Name (IATA) Proper Shipping Name (ADN) Proper Shipping Name (RID) Transport hazard class(es) ADR: Transport hazard class(es) IMDG: Transport hazard class(es) : : : : : : : 01/10/2018 EN (English) ID: FP09 I14 R02 4/10

5 IATA: Transport hazard class(es) ADN: Transport hazard class(es) RID: Transport hazard class(es) Packing group Packing group (ADR) Packing group (IMDG) Packing group (IATA) Packing group (ADN) Packing group (RID) Environmental hazards Dangerous for the environment Marine pollutant : : : : : : : : : No : No : No supplementary information available Special precautions for user Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture EU-Regulations No REACH Annex XVII restrictions Contains no REACH candidate substance National regulations Chemical safety assessment No chemical safety assessment has been carried out SECTION 16: Data sources : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006. : None. Full text of H- and EUH-phrases: Acute Tox. 2 (Oral) Acute toxicity (oral), Category 2 Aquatic Acute 1 Hazardous to the aquatic environment Acute Hazard, Category 1 Aquatic Chronic 1 Hazardous to the aquatic environment Chronic Hazard, Category 1 H300 H400 H410 Fatal if swallowed Very toxic to aquatic life Very toxic to aquatic life with long lasting effects SDS EU (REACH Annex II) This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product 01/10/2018 EN (English) ID: FP09 I14 R02 5/10

6 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : VitalScreen Reagent 2 Product code : VITAL_2 GMDN : Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses Industrial/Professional use spec Use of the substance/mixture : For professional use only : Diagnostic kit for the in vitro determination of sperm vitality Uses advised against 1.3. Details of the supplier of the safety data sheet FertiPro N.V. Industriepark Noord Beernem Belgium info@fertipro.com 1.4. Emergency telephone number Emergency number : SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification according to Regulation (EC) No. 1272/2008 [CLP]Show CLP information + DPD classification in section 2.1 Not classified Adverse physicochemical, human health and environmental effects 2.2. Label elements Labelling according to Regulation (EC) No. 1272/2008 [CLP] No labelling applicable 2.3. Other hazards SECTION 3: Composition/information on ingredients 3.1. Substance 3.2. Mixture Name Product identifier % Classification according to Regulation (EC) No. 1272/2008 [CLP] Ultrapure water (CAS No) (EC no) Not classified Nigrosin (CAS No) Not classified Sodium chloride (CAS No) (EC no) sodium azide (CAS No) (EC no) (EC index no) Full text of H-phrases: see section Not classified < 0,1 Acute Tox. 2 (Oral), H300 Aquatic Acute 1, H400 Aquatic Chronic 1, H410 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures general First-aid measures after inhalation First-aid measures after skin contact : Never give anything by mouth to an unconscious person. If you feel unwell, seek medical advice (show the label where possible). : Assure fresh air breathing. Allow the victim to rest. : Remove affected clothing and wash all exposed skin area with mild soap and water, followed by warm water rinse. 01/10/2018 EN (English) ID: FP09 I14 R02 6/10

7 First-aid measures after eye contact First-aid measures after ingestion : Rinse immediately with plenty of water. Obtain medical attention if pain, blinking or redness persist. : Rinse mouth. Do NOT induce vomiting. Obtain emergency medical attention Most important symptoms and effects, both acute and delayed Symptoms/injuries : Not expected to present a significant hazard under anticipated conditions of normal use Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Unsuitable extinguishing media : Foam. Dry powder. Carbon dioxide. Water spray. Sand. : Do not use a heavy water stream Special hazards arising from the substance or mixture 5.3. Advice for firefighters Firefighting instructions Protection during firefighting : Use water spray or fog for cooling exposed containers. Exercise caution when fighting any chemical fire. Prevent fire-fighting water from entering environment. : Do not enter fire area without proper protective equipment, including respiratory protection. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel Emergency procedures For emergency responders Protective equipment Emergency procedures : Evacuate unnecessary personnel. : Equip cleanup crew with proper protection. : Ventilate area Environmental precautions Prevent entry to sewers and public waters. Notify authorities if liquid enters sewers or public waters Methods and material for containment and cleaning up Methods for cleaning up 6.4. Reference to other sections See Heading 8. Exposure controls and personal protection. : Soak up spills with inert solids, such as clay or diatomaceous earth as soon as possible. Collect spillage. Store away from other materials. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling : Wash hands and other exposed areas with mild soap and water before eating, drinking or smoking and when leaving work. Provide good ventilation in process area to prevent formation of vapour Conditions for safe storage, including any incompatibilities Storage conditions Incompatible products Incompatible materials Storage temperature : 2-25 C 7.3. Specific end use(s) See instructions for use delivered with the device. : Keep only in the original container in a well ventilated place away from direct (sun)light. Keep container closed when not in use. Do not freeze. Do not use after expiry date. : Strong bases. Strong acids. SECTION 8: Exposure controls/personal protection 8.1. Control parameters. : Sources of ignition. Direct (sun)light Exposure controls Appropriate engineering controls: Personal protective equipment: Skin protection: : Handle in accordance with good industrial hygiene and safety. Avoid all unnecessary exposure. : Wear fire/flame resistant/retardant clothing. : Complete suit protecting against chemicals, flame retardant antistatic protective clothing. The type of protection must be selected according to the concentration and volume of the dangerous substance at the specific workplace. 01/10/2018 EN (English) ID: FP09 I14 R02 7/10

8 Hand protection Eye/Face protection Respiratory protection : Wear protective gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to meet the specifications of EU-directive 89/686/EEC and the standard EN374 derived from it. : Face shield and safety glasses. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166 (EU). : Wear appropriate mask. Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). : Do not eat, drink or smoke during use. Do not pipette liquid using a mouth pipette SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Colour : Purple to black. Odour : Odourless. Odour threshold ph Relative evaporation rate (butylacetate=1) Melting point Freezing point Boiling point Flash point Auto-ignition temperature Decomposition temperature Flammability (solid, gas) : Non flammable Vapour pressure Relative vapour density at 20 C Relative density Solubility : Highly soluble in water. Log Pow Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidising properties Explosive limits 9.2. SECTION 10: Stability and reactivity Reactivity Chemical stability Stable after transport (max. 5 days) at elevated temperature ( 37 C). Stable for 24 months after date of manufacture Possibility of hazardous reactions Conditions to avoid Direct (sun)light. Extremely high or low temperatures Incompatible materials Strong acids. Strong bases Hazardous decomposition products Carbon monoxide. Carbon dioxide. 01/10/2018 EN (English) ID: FP09 I14 R02 8/10

9 SECTION 11: Toxicological information Information on toxicological effects Acute toxicity Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitisation Germ cell mutagenicity Carcinogenicity Reproductive toxicity Specific target organ toxicity (single exposure) Specific target organ toxicity (repeated exposure) Aspiration hazard Potential adverse human health effects and symptoms : Based on available data, the classification criteria are not met. SECTION 12: Ecological information Toxicity Persistence and degradability VitalScreen Reagent 2 Persistence and degradability Bioaccumulative potential VitalScreen Reagent 2 Bioaccumulative potential Mobility in soil Results of PBT and vpvb assessment Other adverse effects Avoid release to the environment SECTION 13: Disposal considerations Waste treatment methods Waste disposal recommendations : Dispose in a safe manner in accordance with local/national regulations. Ecology - waste materials : Avoid release to the environment. SECTION 14: Transport information In accordance with ADR / RID / IMDG / IATA / ADN UN number Not regulated for transport UN proper shipping name Proper Shipping Name (ADR) Proper Shipping Name (IMDG) Proper Shipping Name (IATA) Proper Shipping Name (ADN) Proper Shipping Name (RID) Transport hazard class(es) ADR: Transport hazard class(es) IMDG: Transport hazard class(es) IATA: Transport hazard class(es) ADN: Transport hazard class(es) : : : : : : : : : 01/10/2018 EN (English) ID: FP09 I14 R02 9/10

10 RID: Transport hazard class(es) Packing group Packing group (ADR) Packing group (IMDG) Packing group (IATA) Packing group (ADN) Packing group (RID) Environmental hazards Dangerous for the environment Marine pollutant : : : : : : : No : No : No supplementary information available Special precautions for user Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture EU-Regulations No REACH Annex XVII restrictions Contains no REACH candidate substance National regulations Chemical safety assessment No chemical safety assessment has been carried out SECTION 16: Data sources : REGULATION (EC) No 1272/2008 OF THE EUROPEAN PARLIAMENT AND OF THE COUNCIL of 16 December 2008 on classification, labelling and packaging of substances and mixtures, amending and repealing Directives 67/548/EEC and 1999/45/EC, and amending Regulation (EC) No 1907/2006. : None. Full text of H- and EUH-phrases: Acute Tox. 2 (Oral) Acute toxicity (oral), Category 2 Aquatic Acute 1 Hazardous to the aquatic environment Acute Hazard, Category 1 Aquatic Chronic 1 Hazardous to the aquatic environment Chronic Hazard, Category 1 H300 Fatal if swallowed H400 H410 Very toxic to aquatic life Very toxic to aquatic life with long lasting effects SDS EU (REACH Annex II) This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product 01/10/2018 EN (English) ID: FP09 I14 R02 10/10