Material Safety Data Sheet

Transcription

1 Material Safety Data Sheet Section 1 - Product and company identification CHEMICAL PRODUCT & TRADE NAME COMPANY IDENTIFICATION Product Name : KTMC (KCC Transfer Molding Compound) Manufacturer : KCC CORPORATION Trade Name : KTMC-4000(4300A) Address : 844, Yongam-ri, Bongdong-up, Wanju-gun Jeonbuk, KOREA GENERAL PROPERTY Telephone : General Name : Epoxy Molding Compound Emergency : Usage : Encapsulation material for Semiconductor Section 2 - Composition of ingredients INGREDIENT CAS NO. PERCENT BY WEIGHT Silicone dioxide (Fused Silica) Phenol Novolac resin Carbon black Ortho Cresol Novolac Epoxy resin Others Business Secret 1 10 Section 3 - Hazards Identification * NFPA INDEX Ingredient Health Fire Reactivity Fused silica Phenol novolac resin Carbon black Ortho cresol novolac epoxy resin S1 (business secret) No Data No Data No Data *. Fused silica - No information - Short period exposure : may cause irritation - Long period exposure : no information - Short period exposure : may cause difficult breathing, lungs troubles - Long period exposure : may cause irritation, difficult breathing, lose weight, pleurodynia, lungs troubles - Short period exposure : no report on the ill effects - Long period exposure : no information 1/6 page

2 *. Phenol novolac resin - May cause serious problem when ingest - Allergy and irritation with breathing organs, skin and eyes - Do not contact to the eyes, skin, clothes - Container surely close up - Use under good ventilation and handle with care - Short period exposure : may cause irritation and burn - Long period exposure : may cause irritation and burn - Short period exposure : may cause allergy and irritation when absorbed - Long period exposure : may cause eruption - Short period exposure : fatal when inhale. may cause allergy. Difficult breathing. Headache. Heart troubles - Long period exposure : may cause eruption and paralysis - Short period exposure : harmful when swallow and may cause burn vomit, diarrhea, hematuria, mydriasis, stomachache - Long period exposure : in addition to short period exposure, may cause eruption and difficult breathing, headache *. Carbon black - carcinogenic substance - Short period exposure : may cause irritation - Long period exposure : may cause irritation, difficult breathing, headache, lose hearing, lungs troubles - Short period exposure : no information - Long period exposure : no report on the ill effects *. Ortho cresol novolac epoxy resin - No relevant data - Short period exposure : no information - Long period exposure : no information *. S1(business secret) - No relevant data 2/6 page

3 Section 4 - First Aid Measures INHALATION Remove from exposure area to fresh air immediately. Perform artificial respiration if not breathing. Get medical attention immediately. EYES Wash eyes immediately with large amounts of water occasionally lifting upper and lower lids, until no evidence of chemical remains (at least 15 ~ 20 min). Get medical attention immediately. SKIN Remove contaminated clothing and shoes immediately. Wash affected area thoroughly with soap and water until no evidence of chemical remains. Get medical attention immediately. SWALLOW If swallowed, drink plenty of water. Get medical attention immediately. Induce vomiting only at the instructions of a physician. Do not give anything by mouth to Unconscious or convulsive person Section 5 - Fire Fighting Measures EXTINGUISHING MEDIA Water, Regular foam, Carbon Dioxide, Dry Chemical SPECIAL FIRE FIGHTING PROCEDURES Firefighters should wear full bunker gear, including a positive pressure self-contained breathing apparatus. UNUSUAL FIRE AND EXPLOSION HAZARDS May generate hazardous combustion gas under flame condition. Section 6 Accidental Release Measures Remove by mechanical means. Vacuum or sweep out ; avoid producing dust. Section 7 - Handling and Storage HANDLING : Protect against physical damage. Use with adequate ventilation. Worker must wear air-purifying respirator, safety goggles, protective clothing and gloves to prevent contact with this material. Keep container tightly closed. STORAGE : Store in tightly closed containers at the low temperature ( 5 or below ) warehouse. Avoid prolonged breathing of vapors and mists. Approved air supplied type respirator should be used in confined spaces, especially such as inside of tank. 3/6 page

4 Section 8 - Exposure controls / Personal Protection RESPIRATORY PROTECTION Use only with adequate ventilation. If personal exposure cannot be controlled below applicable limits by ventilation, wear a properly fitted organic vapor/particulate respirator approved by authorized institute. Approved air supplied type respirator should be used in confined spaces. VENTILATION : Use explosion-proof ventilation equipment. PROTECTIVE GLOVES : Insoluble type (Neoprene) is recommended. EYE PROTECTION : Splash-proof or dust-resistant safety goggles is recommended. OTHER PROTECTIVE EQUIPMENTS : Clean, long-legged, long-sleeved work clothes. EXPOSURE GUIDELINES : Component CAS NO. Exposure Limits Fused silica OSHA respirable dust: 0.1 mg/ m3 (1989) ACGIH TLV-TWA respirable dust: 0.1 mg/ m3 (1971) Phenol novolac resin No exposure limit established Carbon black OSHA PEL: 3.5 mg/ m3 (1989) (1971) ACGIH TLV-TWA: 3.5 mg/ m3 ACGIH TLV-STEL: 7 mg/ m3 Ortho cresol novolac epoxy resin No exposure limit established Section 9 - Physical and Chemical Properties APPEARANCE : Black solid phase ( pellet or powder ) ODOR : Odorless SPECIFIC GRAVITY (WATER=1) : BOILING POINT ( ) : No Data FLASH POINT : No Data EVAPORATION RATE(VS.n-BuAc) : No Data PH VALUE : SOLUBILITY IN WATER : No Data VAPOR DENSITY(VS.AIR) : No Data LOW EXPLOSIVE LIMIT(LEL) : No data UPPER EXPLOSIVE LIMIT(UEL) : No data AUTO IGNITION TEMPERATURE : No data 4/6 page

5 Section 10 - Stability and Reactivity STABILITY Product is temperature and moisture sensitive. Stable below 10 CONDITION TO AVOID Temperatures over 5 when stored. INCOMPATIBILITY (materials to avoid) Strong oxidizing agents, strong acids and bases. HAZARDOUS DECOMPOSITION PRODUCTS Mainly carbon dioxide. Thermal decomposition can lead to release of irritating gases and vapors such as methane, ammonia, and phenol and hydrocarbon compound. ( temperature : over 300 ) HAZARDOUS POLYMERIZATION: Will not occur under normal conditions. Section 11 - Toxicological Information EFFECTS OF EXPOSURE : See section 3 Section 12 - Environmental Information Do not allow to enter soil, waterways and waste water channel. Remove the contaminants immediately, not to leak out of the area. Waste from the use process is cured before release to the environment. Section 13 - Disposal Considerations Discharge, treatment, or disposal may be subject to national, state, or local laws. Mix with compatible chemical which is less flammable and incinerate. Since emptied containers retain product residue, follow label warnings even after container is emptied. Section 14 - Transport Information International Transportation Regulation : No dangerous by any mode. US Department of Transportation(DOT) : No data Section 15 - Regulatory Information The law for occupational safety and health in Korea The law for hazardous chemical substances in Korea TSCA(Toxic Substances Control Act) The ingredients of this product are all on the 8(b) Inventory List. EINECS(European Inventory of Existing Commercial Chemical Substances) This product compiles with the Provision of the European Inventory. 5/6 page

6 Section 16 - Other Information Given data is based on our current knowledge and experience. The purpose of this datasheet is to describe the products in terms of their safety requirements. The data does not signify any warranty with regard to the products' properties. 6/6 page