ELVAMIDE 8061 nylon multipolymer resin
|
|
|
- Henry Cobb
- 6 years ago
- Views:
Transcription
1 This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Product Use : Polymer Restrictions on use : For manufacturing and research use only Manufacturer/Supplier : DuPont 974 Centre Road Wilmington, DE 19805, USA Product Information : (outside the U.S ) Medical Emergency : (outside the U.S ) Transport Emergency : CHEMTREC: (outside the U.S ) SECTION 2. HAZARDS IDENTIFICATION Product hazard category Combustible dust Label content Pictogram Signal word : not required : Warning Hazardous warnings : May form combustible dust concentrations in air. Hazardous prevention measures : not required Other hazards 1 / 10
2 If small particles are generated during further processing, handling or by other means, may form combustible dust concentrations in air. SECTION 3. COMPOSITION/INFORMATION ON INGREDIENTS This product does not contain any components that require disclosure according to OSHA Hazard Communication Standard SECTION 4. FIRST AID MEASURES General advice Inhalation Skin contact : Move to fresh air in case of accidental inhalation of fumes from overheating or combustion. If not breathing, give artificial respiration. If breathing is difficult, give oxygen. Call a physician. : The material is not likely to be hazardous by skin contact, but cleaning the skin after use is advisable. Cool skin rapidly with cold water after contact with molten material. Do not peel polymer from the skin. Obtain medical treatment for thermal burn. Eye contact : In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Call a physician. Ingestion Most important symptoms/effects, acute and delayed Protection of first-aiders Notes to physician : No specific intervention is indicated. Consult a physician if necessary. SECTION 5. FIREFIGHTING MEASURES Suitable extinguishing media : Water, Foam, Dry chemical, Carbon dioxide (CO2) 2 / 10
3 Unsuitable extinguishing media Specific hazards : Combustible. Large molten masses may ignite spontaneously in air. Water quenching is good practice. Minimize the generation and accumulation of dust. Failure or malfunction of temperature control systems on processing equipment, such as extruders, may create explosion hazards. (see also section 10) Carbon monoxide, Carbon dioxide. Special protective equipment for firefighters Further information : Wear self-contained breathing apparatus and protective suit. : Evacuate personnel and keep upwind of fire. SECTION 6. ACCIDENTAL RELEASE MEASURES NOTE: Review FIRE FIGHTING MEASURES and HANDLING (PERSONNEL) sections before proceeding with clean-up. Use appropriate PERSONAL PROTECTIVE EQUIPMENT during clean-up. Safeguards (Personnel) Environmental precautions Spill Cleanup Accidental Release Measures : Spilled material is a slipping hazard. : Do not discharge to streams, ponds, lakes or sewers. : Spills of fine material should be cleaned using gentle sweeping or vacuuming. Cleaning methods (e.g. compressed air) which can generate potentially combustible dust clouds should not be used. Dust deposits should not be allowed to accumulate on surfaces, as these may form an explosive mixture if they are released into the atmosphere in sufficient concentration. Use only non-sparking tools. SECTION 7. HANDLING AND STORAGE Handling (Personnel) : Open container only in well-ventilated area. Wash hands thoroughly after handling. Provide appropriate exhaust ventilation at dryers, machinery and at places where dust or volatiles can be generated. Do not breathe dust. Minimize the generation and accumulation of dust. Pneumatic conveying and other mechanical handling operations can generate combustible dust. Routine housekeeping should be instituted to ensure that dusts do not 3 / 10
4 accumulate on surfaces. Handling (Physical Aspects) Dust explosion class Storage Storage period Storage temperature : Store in a cool, dry place. Keep container closed to prevent contamination. Keep in an area equipped with sprinklers. SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Engineering controls : General mechanical ventilation is normally adequate but use local exhaust where necessary to maintain exposures below acceptable limits. Use local exhaust to completely remove vapors and fumes liberated during hot processing from the work area. Personal protective equipment Respiratory protection Hand protection Eye protection Skin and body protection : Additives in this product do not present a respiration hazard unless the product is ground to a powder of respirable size and the dust is inhaled. All dusts are potentially injurious to the respiratory tract if respirable particles are generated and inhaled. A respiratory protection program that meets country requirements must be followed whenever workplace conditions warrant respirator use. Consult the respirator manufacturer to determine the appropriate type of equipment for a given application. Observe respirator use limitations specified by the manufacturer. Consult the OSHA respiratory protection information located at 29CFR Use a positive pressure air supplied respirator if exposure levels are not known or there are any other circumstances where air purifying respirators may not provide adequate protection. : Additional protection: Wear leather or cotton gloves when grinding, sawing, routing, drilling or sanding., When handling hot material, use heat resistant gloves. : Wear safety glasses with side shields. Wear tightly fitting chemical splash goggles and face shield when possibility exists for eye and face contact due to spattering or splashing of molten material. A full-face mask respirator provides protection from eye irritation. : If there is a potential for contact with hot/molten material wear heat resistant clothing and footwear. 4 / 10
5 Exposure Guidelines Exposure Limit Values This product does not contain any exposure limits that require disclosure according to OSHA Hazard Communication Standard Non-Constituent(s) Dust (inhalable and respirable fraction) Permissible exposure limit: (OSHA) 5 mg/m3 8 hr. TWA Respirable fraction. Permissible exposure limit: (OSHA) 15 mg/m3 8 hr. TWA Total dust. TLV (ACGIH) 3 mg/m3 TWA Respirable particles. TLV (ACGIH) 10 mg/m3 TWA Inhalable particles. SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical state : solid Form : pellets Color : natural Odor Odor threshold ph Melting point/freezing point Boiling point/boiling range : ester-like : Melting point/range > 110 C (> 230 F) : Boiling point/boiling range Not applicable 5 / 10
6 Flash point Evaporation rate Flammability (solid, gas) Upper explosion limit Lower explosion limit Vapor pressure Vapor density Specific gravity (Relative density) Water solubility Solubility(ies) Partition coefficient: n- octanol/water Auto-ignition temperature Decomposition temperature : May form combustible dust concentrations in air. : > 1 : insoluble : Thermal decomposition of the resin accelerates above temperature listed. Decomposition can occur below the recommended processing temperature limit. Decomposition is a function of both processing temperature and time at that temperature. Viscosity, kinematic Viscosity, dynamic SECTION 10. STABILITY AND REACTIVITY Reactivity : Stable at normal ambient temperature and pressure. Chemical stability : Stable at normal ambient temperature and pressure. 6 / 10
7 Possibility of hazardous : Polymerization will not occur. reactions Conditions to avoid : Heating in air. Abnormally long processing time or high temperatures can produce irritating and toxic fumes. Decomposes on heating. At temperatures above the "conditions to avoid" temperature, thermal decomposition of the resin accelerates. Decomposition can occur below the recommended processing temperature limit. Decomposition is a function of both processing temperature and time at that temperature. Incompatible materials : Strong acids Strong bases, Strong oxidizing agents Hazardous decomposition products : Hazardous thermal decomposition products may include: Ammonia, traces of hydrogen cyanide, Nitrogen oxides (NOx), Aldehydes, Organic acids, Alcohols Carbon dioxide, Carbon monoxide, ε-caprolactam SECTION 11. TOXICOLOGICAL INFORMATION Further information : No data is available on the product itself.for additional toxicity data, write to the company address or call the non-emergency number shown in Section 1. Carcinogenicity The carcinogenicity classifications for this product and/or its ingredients have been determined according to HazCom 2012, Appendix A.6. The classifications may differ from those listed in the National Toxicology Program (NTP) Report on Carcinogens (latest edition) or those found to be a potential carcinogen in the International Agency for Research on Cancer (IARC) Monographs (latest edition). None of the components present in this material at concentrations equal to or greater than 0.1% are listed by IARC, NTP, or OSHA, as a carcinogen. SECTION 12. ECOLOGICAL INFORMATION 7 / 10
8 Additional ecological information : No data is available on the product itself. Toxicity is expected to be low based on insolubility in water. SECTION 13. DISPOSAL CONSIDERATIONS Waste disposal methods - Product : Preferred options for disposal are recycling or incineration with energy recovery. The high fuel value of this product makes incineration very desirable for material that cannot be recycled. Treatment, storage, transportation, and disposal must be in accordance with applicable federal, state/provincial, and local regulations. Contaminated packaging SECTION 14. TRANSPORT INFORMATION Not classified as dangerous in the meaning of transport regulations. SECTION 15. REGULATORY INFORMATION TSCA : In compliance with TSCA Inventory requirements for commercial purposes. SARA 313 Regulated Chemical(s) PA Right to Know Regulated Chemical(s) NJ Right to Know Regulated Chemical(s) California Prop. 65 : This material does not contain any chemical components with known CAS numbers that exceed the threshold (De Minimis) reporting levels established by SARA Title III, Section 313. : Substances on the Pennsylvania Hazardous Substances List present at a concentration of 1% or more (0.01% for Special Hazardous Substances): ε- Caprolactam : Substances on the New Jersey Workplace Hazardous Substance List present at a concentration of 1% or more (0.1% for substances identified as carcinogens, mutagens or teratogens): ε-caprolactam : Chemicals known to the State of California to cause cancer, birth defects or any other harm: none known 8 / 10
9 SECTION 16. OTHER INFORMATION Restrictions for use : Do not use DuPont materials in medical applications involving implantation in the human body or contact with internal body fluids or tissues unless the material has been provided from DuPont under a written contract that is consistent with DuPont policy regarding medical applications and expressly acknowledges the contemplated use. For further information, please contact your DuPont representative. You may also request a copy of the DuPont POLICY Regarding Medical Applications and DuPont CAUTION Regarding Medical Applications. Elvamide is a registered trademark of DuPont. The DuPont Oval Logo is a registered trademark of E.I. du Pont de Nemours and Company. Read the product information datasheet for this product or the molding guide for this resin family. Refer to NFPA 654, Standard for the Prevention of Fire and Dust Explosions from the Manufacturing, Processing, and Handling of Combustible Particulate Solids, for safe handling. Revision Date : 05/29/2015 The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Significant change from previous version is denoted with a double bar. 9 / 10
10 Warning Hazard statements: May form combustible dust concentrations in air. Supplemental information: If small particles are generated during further processing, handling or by other means, may form combustible dust concentrations in air. Refer to Safety Data Sheet (SDS) for further information. DuPont 974 Centre Road, Wilmington, DE 19805, USA Product Information: (outside the U.S ) Medical Emergency: (outside the U.S ) Transport Emergency: CHEMTREC: (outside the U.S ) Report version: /29/2015 Ref LBL_US_GHS Elvamide is a registered trademark of DuPont. The DuPont Oval Logo is a registered trademark of E.I. du Pont de Nemours and Company.
Tynex A abrasive filaments
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE fluoroplastics
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
AF Amorphous Fluoroplastic resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
PTFE Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE Fluoroplastic
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox 143 Series Oils
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox NRT 8908 Paste
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
DuPont Krytox GPL 21(X) Series Greases
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Tefzel ETFE Conductive Fluoroplastic
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
FEP Fluoroplastic resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Neoprene polychloroprene
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
FEP Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox 240 Series Greases
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Corian Solid Surface Material
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Ref Product name : Corian Solid Surface Product Use : sheets and shaped articles, For professional users only.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "HYTREL" POLYESTER ELASTOMERS ALL IN
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
ZODIAQ Quartz Surfaces
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
FEP Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox Sodium Nitrite Inhibited PFPE/PTFE Greases (GPL 22(X) Series)
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
KEVLAR brand engineered elastomer
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
GHS SAFETY DATA SHEET (SDS)
GHS SAFETY DATA SHEET (SDS) SECTION 1 - PRODUCT AND COMPANY IDENTIFICATION PRODUCT: Part #1562 Nomex Honeycomb, 1.8 lb. FIBRE GLAST DEVELOPMENTS CORP. 385 CARR DRIVE BROOKVILLE, OH 45309 TELEPHONE: (937)
Tefzel ETFE FLUOROPOLYMERS
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Krytox RFE PFPE High Performance Lubricant
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
1.2. Relevant identified uses of the substance or mixture and uses advised against (INT)
Revision date: 01/11/2015 SECTION 1: Identification of the substance/mixture 1.1. Product identifier Product form Substance name : Substance Formula : CaCO 3 Molecular weight : : 100.09 g/mol CAS No. :
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "ZODIAQ" QUARTZ SURFACES COR009 Revised
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 05/10/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Poly(vinyl buytral) Molecular Formula:
DuPont Tyvek ThermaWrap R5.0
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
: Ceramic Aluminum Oxide Nylox Brush
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Ceramic Aluminum Oxide Nylox Brush 1.2. Relevant identified uses of the substance
MATERIAL SAFETY DATA SHEET
MATERIAL SAFETY DATA SHEET 1 PRODUCT AND COMPANY IDENTIFICATION Product Name: Manufacturer Name: Federal-Mogul Corporation 26555 Northwestern Highway Southfield, Michigan 48034 U.S.A. Intended Use: Industrial
ZODIAQ Quartz Surfaces
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Issue Date: 13-Dec-2012 Revision Date: 10-APR-2015 Version 2 1. IDENTIFICATION. United 432 PHASER GLASS BLAST. Concentrated glass cleaner.
Safety Data Sheet Issue Date: 13-Dec-212 Revision Date: 1-APR-215 Version 2 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # United 432 PHASER GLASS BLAST UNITED-432
DELRIN 500T NC010 acetal resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
: : Sontara Old Hickory, Inc. 326 Swinging Bridge Rd. Old Hickory, TN 37138
Safety Data Sheet This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory Requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 10/27/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Polypropylene, isotactic, chlorinated
Safety Data Sheet. (L-Aspartic Acid) L-Aspartic Acid DATE PREPARED: 3/6/2017. Section 1. Product and Company Identification
Section 1. Product and Company Identification L-Aspartic Acid Product Name CAS Number 56-84-8 Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914) 654-6899
Issue Date: 16-Feb-2012 Revision Date: 24-Feb-2015 Version 2 1. IDENTIFICATION. United 894 ZYME-OUT. For industrial and institutional use only.
Safety Data Sheet Issue Date: 16-Feb-2012 Version 2 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # United 894 ZYME-OUT UNITED-894 Recommended use of the chemical
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 12/06/16 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: Propylene glycol monostearate Molecular
1-Octene, polymer with ethene (cas ) MSDS
Click http://www.guidechem.com/cas-262/26221-73-8.html for suppliers of this product 1-Octene, polymer with ethene (cas 26221-73-8) MSDS The MSDS format adheres to the standards and regulatory requirements
Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: PRODUCT AND COMPANY IDENTIFICATION
SAFETY DATA SHEET Issue Date: March 27, 2017 Revision Date: March 27, 2017 Version: 2017 Product Name: Slip Stop Other Means of Identification SDS #: F6523 1. PRODUCT AND COMPANY IDENTIFICATION Recommended
Not a dangerous substance or mixture according to the Globally Harmonized System (GHS).
1. PRODUCT AND COMPANY IDENTIFICATION Product name : IRDye 700 Phosphoramidite Part Number(s) : 830-05368, 4200-33, 4200-34 Brand : LI-COR Identified uses : Laboratory chemicals, Manufacture of substances
Scientific Polymer Products, Inc.
Scientific Polymer Products, Inc. www.scipoly.com SAFETY DATA SHEET Revision Date: 01/03/17 Section 1: Identification PRODUCT AND COMPANY INFORMATION Product Name: N-Ethyl o,p-toluenesulfonamide Molecular
Safety Data Sheet HIGH TEMP GLUE STICKS (10 PIECES)
SECTION 1. IDENTIFICATION Commercial Product : Name Product number : 0890100050 SDS-Identcode : 10033067 Product Use Description : Hot-melt adhesives Company : Wurth USA Inc. 93 Grant St. 07446 Ramsey,
Associates of Cape Cod, Inc.
1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product Identifiers Product Name : Pyrotell Product Number : G2003, G2006, G2125, G2250, G5003, G5006, G5125, G5250, and GP5003 1.2 Relevant identified uses of
Associates of Cape Cod, Inc.
1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Product name : Pyrosate Product Number : PSL-0.03, -0.125, and -0.25 1.2 Relevant identified uses of the substance or mixture and uses advised
1.2. Relevant identified uses of the substance or mixture and uses advised against (INT)
SECTION 1: Identification of the substance/mixture 1.1. Product identifier Product form Substance name : Substance : Tragacanth CAS No. : 9000-65-1 Product code Formula Synonyms Tragacanth Gum Revision
Safety Data Sheet. (Pramoxine Hydrochloride) Pramoxine Hydrochloride DATE PREPARED: 2/16/2016. Section 1. Product and Company Identification
Section 1. Product and Company Identification Product Name CAS Number 637-58-1 Pramoxine Hydrochloride Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914)
Issue Date: 27-Dec-2011 Revision Date: 28-Jul-2015 Version 1 1. IDENTIFICATION. Buckeye Sanicare Disinfecting Wipes
Safety Data Sheet Issue Date: 27-Dec-2011 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Buckeye Sanicare Disinfecting Wipes BE-50960200 Product Code 50960200
Target Molecule Material Safety Data Sheet Reversion Date 12/02/ PRODUCT AND COMPANY IDENTIFICATION
Target Molecule Material Safety Data Sheet Reversion Date 12/02/2016 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifier Product Name: SH-4-54 Catalog No.: T6669 CAS No.: 1456632-40-8 1.2 Relevant
PFA Fluoroplastic Resin
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
SAFETY DATA SHEET 1. PRODUCT IDENTIFICATION 3. COMPOSITION/INFORMATION ON INGREDIENTS 4. FIRST AID MEASURES
SAFETY DATA SHEET Product Name: Catalog Number: 1. PRODUCT IDENTIFICATION HEPES Buffer Solution (1M) B351xx Recommended Use: For in vitro research use only Company: Atlanta Biologicals, Inc. 4172 Industry
Issue Date: 04-Dec-2004 Revision Date: 18-Nov-2013 Version 1 1. IDENTIFICATION. Plastpro Fiberglass Doors 2. HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 04-Dec-2004 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Plastpro Fiberglass Doors PLASTPRO-001 Recommended use of the chemical
ACP-175 Clean Sweep Date: PRODUCT AND COMPANY IDENTIFICATION. Floor Maintenance / Sweeping Compound
SAFETY DATA SHEET ACP-175 Clean Sweep Date: 8-12-15 1. PRODUCT AND COMPANY IDENTIFICATION Product Identifier Product Name Clean Sweep Other Means of Identification Product Code ACP-175 Recommended Use
COMPONENT CAS NUMBER CONCENTRATION Magnesium Carbonate <= 100%
Section 1. Product and Company Identification Product Name Magnesium Carbonate CAS Number 23389-33-5 Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914)
Sodium Potassium Aluminum Silicates
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Trade name : Tech-Flo Perlite Filteraid, Tech-Flo Expanded Perlite Manufacturer or supplier's details Company : Johns Manville Address : P.O. Box 5108 Denver,
Issue Date: 01-Jun-2010 Revision Date: 10-Sep-2015 Version 1 1. IDENTIFICATION MSH-32, MSH-1, MSH HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 01-Jun-2010 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # Product Code MSH - MICRO SHIELD ACE-009 MSH-32, MSH-1, MSH-55 Recommended
Safety Data Sheet. (Lanolin) Lanolin DATE PREPARED: 11/20/2015. Section 1. Product and Company Identification. Product Name CAS Number
Section 1. Product and Company Identification Lanolin Product Name CAS Number 8006-54-0 Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914) 654-6899 parchem.com
Krytox PFPE/PTFE Greases with Soluble Additive
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
: Nylon Nylox Brushes
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Nylon Nylox Brushes 1.2. Relevant identified uses of the substance or mixture and
DuPont Sealant for Tyvek Fluid Applied System
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
Issue Date 03-Jan-2011 Revision Date 01-May-2013 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION
SAFETY DATA SHEET Issue Date 03-Jan-2011 Version 1 1. PRODUCT AND COMPANY IDENTIFICATION Product Identifier Product Name EXCEL-P FORMULA POURABLE DENTURE MATERIAL CAS-No. 9011-14-7 (PMMA) EC No. 618-466-4
Safety Data Sheet. Issue Date: 06-Aug-2009 Revision Date: 18-Apr-2014 Version 1 1. IDENTIFICATION. Liquid disinfectant cleaner.
Safety Data Sheet Issue Date: 06-Aug-2009 Revision Date: 18-Apr-2014 Version 1 1. IDENTIFICATION Product Identifier Product Name Restroom Stop Other means of identification SDS # WC-033 Product Code #22
Issue Date: Revision Date: Version 1 1. IDENTIFICATION
Safety Data Sheet Issue Date: 8-14-2015 Revision Date: 8-14-2015 Version 1 1. IDENTIFICATION Product Identifier Product Name Other means of identification SDS # DRYLOK Liquid Etch CCC-040 Recommended use
Lithium aluminum titanium phosphate Revision Date: Mar Safety Data Sheet
1. Product and Company Identification Safety Data Sheet Product Name: Lithium aluminum titanium phosphate CAS#: 120479-61-0 Identified uses: Laboratory chemicals, Research Formula: Li 1.5Al 0.5Ti 1.5(PO
SAFETY DATA SHEET <#####> Dermoscent BIO BALM for Dogs Version 2.0 Revision Date 01/08/2015
1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product information Product Name: MSDS Number: 122000011164 Use : Cosmetics Company BAYER HEALTHCARE LLC Animal Health Division
Safety Data Sheet. (Theobromine) Theobromine DATE PREPARED: 11/18/2015. Section 1. Product and Company Identification. Product Name CAS Number
Section 1. Product and Company Identification Theobromine Product Name CAS Number 83-67-0 Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914) 654-6899 parchem.com
Polypropylene Safety Data Sheet
SECTION 1: IDENTIFICATION OF THE SUBSTANCE 1. Intended Use of the Product Use of the Substance/Mixture: For professional use only SECTION 2: HAZARDS IDENTIFICATION 2.1. Classification of the Substance
Safety Data Sheet. 3-[4-(1H-imidazol-1-ylmethyl)phenyl]-2E-propenoic acid, OKY-046
![Safety Data Sheet. 3-[4-(1H-imidazol-1-ylmethyl)phenyl]-2E-propenoic acid, OKY-046](/thumbs/87/95048307.jpg "Safety Data Sheet. 3-[4-(1H-imidazol-1-ylmethyl)phenyl]-2E-propenoic acid, OKY-046")
LKT Laboratories, Inc. Safety Data Sheet Section 1. Product and Company Identification Product Name Ozagrel Hydrochloride Product ID O9702 Chemical Name (Synonyms) 3-[4-(1H-imidazol-1-ylmethyl)phenyl]-2E-propenoic
SAFETY DATA SHEET <#####> REMEND CORNEAL REPAIR GEL Version 1.0 Revision Date 01/07/2014
1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product information Product Name: MSDS Number: 122000010653 Company BAYER HEALTHCARE LLC Animal Health Division 12707 Shawnee Mission
Krytox PFPE/PTFE Greases (GPL 20(X) Series)
This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries. SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product
SAFETY DATA SHEET PRODUCT IDENTIFICATION. 5.0 oz/yd² g/m². 445 St-Jacques Québec, Canada J3B 2M1 Tel.: (450)
SAFETY DATA SHEET PRODUCT IDENTIFICATION Product Name: Product composition: Weaver: Raw material: TA-05-P 5.0 oz/yd² - 168 g/m² 100% Kevlar Aramid fabric Texonic inc 445 St-Jacques Québec, Canada J3B 2M1
Issue Date: 12-Dec-2014 Revision Date: 19-Dec-2014 Version 1 1. IDENTIFICATION HANDI-CLEAN EATERS III ODOR CONTROLER 2. HAZARDS IDENTIFICATION
Safety Data Sheet Issue Date: 12-Dec-2014 Version 1 1. IDENTIFICATION Product Identifier Product Name HANDI-CLEAN EATERS III ODOR CONTROLER Other means of identification SDS # S4884 Recommended use of
Safety Data Sheet. (Melatonin) Melatonin DATE PREPARED: 6/9/2016. Section 1. Product and Company Identification. Product Name CAS Number
Section 1. Product and Company Identification Melatonin Product Name CAS Number 73-31-4 Parchem - fine & specialty chemicals 415 Huguenot Street New Rochelle, NY 10801 (914) 654-6800 (914) 654-6899 parchem.com
www.campbellscience.com Revision Date 10/09/2014 Print Date 10/09/2014 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Product name Product Number : CLH100 Brand : Campbell Science CAS-No.
Safety Data Sheet. Section 1. Product and Company Identification
LKT Laboratories, Inc. Safety Data Sheet Product Name Product ID Chemical Name (Synonyms) Supplier Palmitoyl-D,L-carnitine P0145 Section 1. Product and Company Identification Palmitoyl-DL-carnitine chloride
SAFETY DATA SHEET <#####> Advantage Yard & Premise Spray Version 1.0 Revision Date 10/18/2013
1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product information Product Name: MSDS Number: 122000010775 Company BAYER HEALTHCARE LLC Animal Health Division 12707 Shawnee Mission
1. IDENTIFICATION. US IVD Bacterial Test Standard BD Bruker US IVD Bacterial Test Standard
Safety Data Sheet Issue Date: 26-Nov-2013 Revision Date: 01-Jan-2015 Version B Product Identifier Product Name Other means of identification SDS # Other Information 1. IDENTIFICATION US IVD Bacterial Test
SAFETY DATA SHEET. Section 1. IDENTIFICATION
SAFETY DATA SHEET Section 1. IDENTIFICATION Product Identifier Product Name Gasoila Light Cutting Oil. Other means of Identification Product Code Recommended Use Recommended Restrictions WL32, WL28. Lubricant.
SAFETY DATA SHEET. Section 1. IDENTIFICATION
SAFETY DATA SHEET Section 1. IDENTIFICATION Product Identifier Product Name Copper Thred Gard. Other means of Identification Product Code Recommended Use Recommended Restrictions CG04, CG08, CG16. Anti
MATERIAL SAFETY DATA SHEET according to the Hazard Communication Standard (29 CFR )
Date of issue: 12/12/2012 Version 1.0 SECTION 1. Identification Product identifier Product number 105741 Relevant identified uses of the substance or mixture and uses advised against Identified uses Details
Version 1.4 Revision Date 10/19/2015 Print Date 12/01/2015. QIAGEN Str. 1 D Hilden
SECTION 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Manufacturer or supplier's details Company : QIAGEN GmbH QIAGEN Str. 1 D-40724 Hilden Telephone : +49-02103-29-0 Responsible Department E-mail
Safety Data Sheet. Section 2. Hazards Identification. Not classified. Caution - substance not yet fully tested.
LKT Laboratories, Inc. Safety Data Sheet Section 1. Product and Company Identification Product Name Baccatin VI Product ID T1024 Chemical Name (Synonyms) Supplier Emergency Phone # 1-800-424-9300 LKT Laboratories,
Product: Casting Wax Revision Date: 11/11/2015 SECTION 1 - IDENTIFICATION
SECTION 1 - IDENTIFICATION Product Identifier Product Name: Casting Wax Product Code: 150-57980 Recommended Use of the Chemical and Restrictions on Use Recommended Use: A dental wax used for making a pattern
Issue Date: 09-Jan-2013 Revision Date: 06-Feb-2017 Version Number: Identification. 2. Hazards Identification
Safety Data Sheet Issue Date: 09-Jan-2013 Version Number: 1.1 Product Identifiers Product Name: Bright Dyes FLT Orange Powder Product Number: 105006 Recommended Use & Restrictions on Use Water tracing
Safety Data Sheet. Inhibitors, Agonists, Screening Libraries 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifier
Inhibitors, Agonists, Screening Libraries Safety Data Sheet Revision Date: Print Date: Apr.-28-2018 Apr.-28-2018 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifier Product name : Catalog No.
Safety Data Sheet. LKT Laboratories, Inc.
LKT Laboratories, Inc. Safety Data Sheet Section 1. Product and Company Identification Product Name Melatonin Product ID M1745 Chemical Name (Synonyms) Supplier Emergency Phone # 1-800-424-9300 Regulin;
Safety Data Sheet. allergylabs.com. 1. Product & Company Identification. 2. Hazards Identification
L Safety Data Sheet allergylabs.com Version 1.0 Revision Date: 09/15/2014 1. Product & Company Identification 1.1 Product identifiers Product Name : Sterile Diluent - 10% Glycero-Saline Product Code(s)
DuPont Page 1 Material Safety Data Sheet
DuPont Page 1 "CORIAN" PRODUCTS, SILICONE SEALANT ALL COLORS COR005 Revised April 7, 2011 Printed 7-APR-2011 CHEMICAL PRODUCT/COMPANY IDENTIFICATION Material Identification Corian is a registered trademark
Material Safety Data Sheet
1 Section 1 1145 Sutton Street Howell, MI 48843 Telephone Numbers: (517) 295-4196 Product Information () Transportation Emergency Chemtrec: (800) 424-9300 MATERIAL IDENTIFICATION PRODUCT NAME: LCA PEI
SIGMA-ALDRICH. SAFETY DATA SHEET Version 5.2 Revision Date 02/26/2015 Print Date 04/02/2016
SIGMA-ALDRICH sigma-aldrich.com SAFETY DATA SHEET Version 5.2 Revision Date 02/26/2015 Print Date 04/02/2016 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Product name : Krytox LVP grease
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries.
The MSDS format adheres to the standards and regulatory requirements of the United States and may not meet regulatory requirements in other countries. DuPont Page 1 "ZYTEL" POLYAMIDE RESINS ON SYNONYM
PRODUCT AND COMPANY IDENTIFICATION
SAFETY DATA SHEET Issue Date: July 11, 2017 Revision Date: June 25, 2018 Version: 2017 Product Name: EZ Strip Cure Other Means of Identification SDS #: F6400 Recommended Use: Concrete Curing Compound Restrictions
: Trim-Kut Grinding Disc
SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Trim-Kut Grinding Disc 1.2. Relevant identified uses of the substance or mixture
: Tefzel ETFE fluoropolymers
This SDS adheres to the standards and regulatory requirements of Great Britain and may not meet the regulatory requirements in other countries. 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING
1.2 Relevant identified uses of the substance or mixture and uses advised against
Product Distributed by Rio Grande SDS access on web: www.riogrande.com SAFETY DATA SHEET SECTION 1: IDENTIFICATION 1.1 Product identifier Product Name: Synonyms: Gold Filled 1.2 Relevant identified uses