Safety Data Sheet. according to Regulation (EC) No 1907/2006. Jokisch Monos Atos M4S

Transcription

1 Page 1 of 5 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Further trade names Old product name: Jokisch HDS 400 CF 1.2. Relevant identified uses of the substance or mixture and uses advised against Use of the substance/mixture Cutting oil 1.3. Details of the supplier of the safety data sheet Company name: Street: Industriestraße 5 Place: DE Oerlinghausen Telephone: +49(0)5202/ Telefax: +49(0)5202/ info@jokisch-fluids.de Contact person: Herr Sengenhoff Internet: MSDS@jokisch-fluids.de Emergency telephone number: SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Giftnotruf Berlin: +49 (0) 30 / Regulation (EC) No. 1272/2008 This mixture is not classified as hazardous according to Regulation (EC) No. 1272/ Label elements Regulation (EC) No. 1272/2008 Special labelling of certain mixtures EUH210 Safety data sheet available on request. SECTION 3: Composition/information on ingredients 3.2. Mixtures Hazardous components CAS No Chemical name EC No Index No REACH No Classification according to Regulation (EC) No. 1272/2008 [CLP] Quantity tris(2-ethylhexyl) phosphate < 5 % Skin Irrit. 2; H315 Full text of H and EUH statements: see section 16. Further Information The highly refined mineral oil contains <3% (w/w) DMSOextract, according to IP346. SECTION 4: First aid measures 4.1. Description of first aid measures

2 Page 2 of 5 General information Seek medical attention if problems persist. No administration in cases of unconsiousness or cramps. After inhalation Move victim to fresh air. Put victim at rest and keep warm. After contact with skin Take off immediately all contaminated clothing. After contact with skin, wash immediately with plenty of water and soap. After contact with eyes In case of contact with eyes, rinse immediately with plenty of flowing water for 10 to 15 minutes holding eyelids apart. Consult an ophthalmologist. After ingestion Do not induce vomiting. In case of swallowing, keep the patient at rest and contact a doctor Indication of any immediate medical attention and special treatment needed Treat symptomatically SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Water fog. Extinguishing powder. Carbon dioxide. Foam. Unsuitable extinguishing media High power water jet Special hazards arising from the substance or mixture Can be released in case of fire: Carbon dioxide (CO2). Carbon monoxide. Nitrogen oxides (NOx) Advice for firefighters In case of fire: Wear self-contained breathing apparatus. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures See protective measures under point 7 and Environmental precautions Do not empty into drains or the aquatic environment. Prevent spreading over great surfaces (e.g. by damming or installing oil booms) Methods and material for containment and cleaning up Absorb with liquid-binding material (e.g. sand, diatomaceous earth, acid- or universal binding agents). Large quantities remove mechanically. Clean contaminated objects and areas thoroughly observing environmental regulations. Clean with detergents. Avoid solvent cleaners. SECTION 7: Handling and storage 7.1. Precautions for safe handling Advice on safe handling Avoid oil mist Use only in well-ventilated areas. Dicrect contact with skins avoid. When using do not eat, drink or smoke.

3 Page 3 of 5 Advice on protection against fire and explosion Prevent access by unauthorised personnel. Further information on handling High slip hazard because of leaking or spilled product Conditions for safe storage, including any incompatibilities Requirements for storage rooms and vessels Keep the packing dry and well sealed to prevent contamination and absorbtion of dampness. Recommended storage temperature: 5-40 C Advice on storage compatibility Keep away from food, drink and animal feedingstuffs. Do not store with strong oxidizing agents. Maximum period of storage (time): 3 Jahre / Years / Jaar SECTION 8: Exposure controls/personal protection 8.1. Control parameters 8.2. Exposure controls Protective and hygiene measures Use personal protection equipment as per Directive 89/686/EEC. Eye/face protection Use glasses or face shield if there is a risk of splashing. Hand protection Protect skin by using skin protective cream. Wear protective gloves if advisable under safety aspects. Wash hands before breaks and at the end of work. Gloves of appropriate material (i.e. nitrilic rubber, specification: penetration time: level 6, >480 min., thickness 0,9-1 mm; CE-certified acc. EN 374 cat III) Skin protection Chemical resistant safety shoes. Take off immediately all contaminated clothing. Thorough skin-cleansing after handling the product. Set out skin protection guidelines. Respiratory protection If technical suction or ventilation measures are not possible or are insufficient, protective breathing apparatus must be worn. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state: Colour: Odour: ph-value: liquid amber coloured characteristic not applicable Test method Changes in the physical state Initial boiling point and boiling range: Flash point: not determined >180 C DIN EN 57 Lower explosion limits: 0,6 vol. % Upper explosion limits: 6,5 vol. % Vapour pressure: not determined Density (at 20 C): 0,90 g/cm³ EN ISO 12185

4 Page 4 of 5 Viscosity / kinematic: (at 40 C) SECTION 10: Stability and reactivity Conditions to avoid Protect against: heat Incompatible materials The following must be prevented: Oxidizing agents, strong. acid Hazardous decomposition products Hazardous decomposition products: none/none SECTION 11: Toxicological information Information on toxicological effects Acute toxicity 87 mm²/s ASTM D 7042 CAS No Chemical name Exposure route Dose Species Source tris(2-ethylhexyl) phosphate oral LD mg/kg RAT dermal LD mg/kg RABBIT Additional information on tests No risks worthy of mention. Practical experience. The statement is derived form the properties of the components. The classification was undertaken in accordance with the calculation method governed by the Preparations Directive (1999/45/EC). SECTION 12: Ecological information Mobility in soil in delivery condition: liquid SECTION 13: Disposal considerations Waste treatment methods Waste disposal number of waste from residues/unused products WASTES FROM SHAPING AND PHYSICAL AND MECHANICAL SURFACE TREATMENT OF METALS AND PLASTICS; wastes from shaping and physical and mechanical surface treatment of metals and plastics; mineral-based machining oils free of halogens (except emulsions and solutions) Classified as hazardous waste. SECTION 14: Transport information Land transport (ADR/RID) Other applicable information (land transport) Inland waterways transport (ADN) Other applicable information (inland waterways transport) Marine transport (IMDG)

5 Page 5 of 5 Other applicable information (marine transport) Air transport (ICAO) Other applicable information (air transport) SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture EU regulatory information Additional information According to EC directives or the corresponding national regulations there is no labelling obligation for this product. National regulatory information Water contaminating class (D): SECTION 16: Other information 1 - slightly water contaminating Changes This data sheet contains changes from the previous version in section(s): 1,2,9. Relevant H and EUH statements (number and full text) H315 Causes skin irritation. EUH210 Safety data sheet available on request. Further Information The information is based on present level of our knowledge. It does not, however, give assurances of product properties and establishes no contract legal rights. (The data for the hazardous ingredients were taken respectively from the last version of the sub-contractor's safety data sheet.)