Ford Internal Ref.: Revision Date Version 1.1 GB / EN. 1. Identification of the substance/mixture and of the company/undertaking

Transcription

1 1. Identification of the substance/mixture and of the company/undertaking 1.1 Product identifier Commercial Product Name : 1.2 Relevant identified uses of the substance or mixture and uses advised against Use of the Substance/Mixture : Gear oil 1.3 Details of the supplier of the safety data sheet Company : Ford Motor Company Ltd., Parts Distribution Centre Royal Oak Way South UK-NN 11 5NT Daventry, Northants United Kingdom Ford-Werke GmbH Edsel-Ford-Str D Köln Deutschland +49 (0) address : Prodsafe.ford@sap.com 1.4 Emergency telephone number (mo. - fr. 09:00-16:00) 2. Hazards identification 2.1 Classification of the substance or mixture Classification (67/548/EEC, 1999/45/EC) Not a hazardous substance or mixture according to EC-directives 67/548/EEC or 1999/45/EC. 2.2 Label elements Special labelling of certain mixtures : Safety data sheet available on request for professional users. 2.3 Other hazards 3. Composition/information on ingredients 3.1 Mixtures Hazardous components Chemical Name CAS-No. Classification Classification Concentration 1 / 11

2 Sulfonic acids, petroleum, calcium salts, overbased EC-No. (67/548/EEC) (1272/2008/EC) [%] Registration number R53 Aquatic Chronic 4; >= 1,5 - < H413 Zinc dialkyl dithiophosphate Xi; R R52/53 Skin Irrit. 2; H315 Aquatic Chronic 3; H412 >= 1,5 - < 2 For the full text of the R-phrases mentioned in this Section, see Section 16. For the full text of the H-Statements mentioned in this Section, see Section First aid measures 4.1 Description of first aid measures General advice If inhaled In case of skin contact : If you feel unwell, seek medical advice (show the label where possible). Never give anything by mouth to an unconscious person. Take off contaminated clothing and shoes immediately. : If breathed in, move person into fresh air. Keep patient warm and at rest. If symptoms persist, call a physician. : Wash off with soap and water. If skin irritation persists, call a physician. Hydrocarbons injected into the skin under pressure can cause severe injury. In the event of a high pressure injection injury, worker should obtain immediate medical assistance. In case of eye contact If swallowed : If easy to do, remove contact lens, if worn. In the case of contact with eyes, rinse immediately with plenty of water and seek medical advice. : Do NOT induce vomiting. If swallowed, seek medical advice immediately and show this container or label. If a person vomits when lying on his back, place him in the recovery position. 4.2 Most important symptoms and effects, both acute and delayed 4.3 Indication of any immediate medical attention and special treatment needed 5. Firefighting measures 5.1 Extinguishing media Suitable extinguishing media : Foam, Carbon dioxide (CO2), Dry powder 2 / 11

3 Unsuitable extinguishing media : High volume water jet 5.2 Special hazards arising from the substance or mixture Specific hazards during firefighting : Do not use a solid water stream as it may scatter and spread fire. Hazardous decomposition products may be formed under fire conditions (see section 10). Exposure to decomposition products may be a hazard to health. 5.3 Advice for firefighters Special protective equipment for firefighters Further information : In the event of fire, wear self-contained breathing apparatus. Use personal protective equipment. : Standard procedure for chemical fires. Use extinguishing measures that are appropriate to local circumstances and the surrounding environment. In the event of fire and/or explosion do not breathe fumes. Use water spray to cool unopened containers. Collect contaminated fire extinguishing water separately. This must not be discharged into drains. Fire residues and contaminated fire extinguishing water must be disposed of in accordance with local regulations. 6. Accidental release measures 6.1 Personal precautions, protective equipment and emergency procedures Refer to protective measures listed in sections 7 and 8. Ensure adequate ventilation, especially in confined areas. Contaminated surfaces will be extremely slippery. Avoid inhalation of vapour or mist. 6.2 Environmental precautions Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities. Prevent spreading over a wide area (e.g. by containment or oil barriers). 6.3 Methods and materials for containment and cleaning up Soak up with inert absorbent material (e.g. sand, silica gel, acid binder, universal binder, sawdust). Keep in suitable, closed containers for disposal. Clean contaminated surface thoroughly. 6.4 Reference to other sections see chapter: 7, 8, 11, 12 and Handling and storage 7.1 Precautions for safe handling Advice on safe handling Advice on protection against fire and explosion : For personal protection see section 8. Do not breathe vapours or spray mist. Avoid contact with skin and eyes. Do not carry cloths that have come into contact with the product in your clothing. : Normal measures for preventive fire protection. 3 / 11

4 Dust explosion class : not applicable 7.2 Conditions for safe storage, including any incompatibilities Requirements for storage areas and containers : Keep containers tightly closed in a dry, cool and well-ventilated place. Advice on common storage : Incompatible with oxidizing agents. Keep away from food, drink and animal feedingstuffs. Other data : No decomposition if stored and applied as directed. 7.3 Specific end uses 8. Exposure controls/personal protection 8.1 Control parameters Contains no substances with occupational exposure limit values. Other information on limit values: see chapter Exposure controls Engineering measures Provide adequate ventilation. Personal protective equipment Respiratory protection : In case of insufficient ventilation, wear suitable respiratory equipment. Respirator with combination filter for vapour/particulate (EN 141). Hand protection Material Glove thickness Break through time Remarks : Nitrile rubber : 0,4 mm : >= 480 min : (Kächele-Cama GmbH, source of supply see or comparable product. Glove recommendation: Camatril Velours 730 Hand protection in case of splash contact Material : Nitrile rubber Glove thickness : 0,4 mm 4 / 11

5 Break through time : >= 480 min Glove recommendation: Camatril Velours 730 (Kächele-Cama GmbH, source of supply see or comparable product. The protective gloves to be used must comply with the specification of EU directive 89/686/EC and the resultant standard EN374. The above given information is based on laboratory test in line with EN374. The recommendation is only valid for the supplied product and the stated application. Special working conditions, like heat or mechanical strain, which deviate from the test conditions, can reduce the protective effect provided by the recommended glove. Eye protection : Avoid contact with eyes. In case of splash hazard, please wear protective goggles. Safety glasses with side-shields conforming to EN166 Skin and body protection : Choose body protection according to the amount and concentration of the dangerous substance at the work place. Hygiene measures : Handle in accordance with good industrial hygiene and safety practice. General industrial hygiene practice. Avoid breathing vapors, mist or gas. Avoid contact with skin, eyes and clothing. When using do not eat, drink or smoke. Wash hands before breaks and at the end of workday. Wash contaminated clothing before re-use. Environmental exposure controls General advice : Do not flush into surface water or sanitary sewer system. Prevent further leakage or spillage if safe to do so. If the product contaminates rivers and lakes or drains inform respective authorities. Prevent spreading over a wide area (e.g. by containment or oil barriers). 9. Physical and chemical properties 9.1 Information on basic physical and chemical properties Appearance : liquid Colour : yellow Odour : oily very faint Odour Threshold : Flash point : > 190 C Ignition temperature Lower explosion limit Upper explosion limit Explosive properties Flammability (solid, gas) Oxidizing properties : : : : : : 5 / 11

6 Autoignition temperature : Burning number : Molecular Weight : ph : not applicable Melting point/range : not applicable Boiling point/boiling range : > 200 C Vapour pressure : Density : 0,863 g/cm3 at 15 C Bulk density Water solubility Partition coefficient: n- octanol/water Solubility in other solvents : : insoluble : : soluble Medium: organic solvents Viscosity, dynamic : 25 mpa.s at 40 C Method: ASTM D 445 Viscosity, kinematic Flow time Impact Sensitivity Relative vapour density Surface tension Evaporation rate Minimum ignition energy Acid number Refraction index Miscibility in water Solvent separation test 9.2 Other information None known. : : : : : : : : : : : 10. Stability and reactivity 10.1 Reactivity 10.2 Chemical stability The product is chemically stable Possibility of hazardous reactions Stability : No decomposition if stored and applied as directed Conditions to avoid 10.5 Incompatible materials 6 / 11

7 Materials to avoid : Strong oxidizing agents 10.6 Hazardous decomposition products Hazardous decomposition products : Carbon monoxide, Carbon dioxide (CO2), Hydrocarbons Thermal decomposition : 11. Toxicological information 11.1 Information on toxicological effects Acute toxicity Acute oral toxicity: Acute inhalation toxicity : Inhalation of mist or dried residue causes irritation of respiratory system. Acute dermal toxicity: Acute toxicity (other routes of administration): Skin corrosion/irritation Skin irritation : Repeated or prolonged exposure may cause skin irritation and dermatitis, due to degreasing properties of the product. Serious eye damage/eye irritation Eye irritation : May irritate eyes. Non persistent irritation Respiratory or skin sensitization Sensitisation: Germ cell mutagenicity Genotoxicity in vitro: Carcinogenicity 7 / 11

8 Reproductive toxicity Teratogenicity STOT - single exposure STOT - repeated exposure Aspiration hazard Aspiration toxicity Neurological effects Toxicology Assessment Toxicology, Metabolism, Distribution Acute effects Further information : Even the smallest quantities that enter into the lung due to swallowing or subsequent vomiting can lead to a pulmonary oedema or pneumonia. 12. Ecological information 12.1 Toxicity 12.2 Persistence and degradability 12.3 Bioaccumulative potential 12.4 Mobility in soil 8 / 11

9 12.5 Results of PBT and vpvb assessment 12.6 Other adverse effects Adsorbed organic bound halogens (AOX) Additional ecological information : Remarks: not included : The product should not be allowed to enter drains, water courses or the soil. 13. Disposal considerations 13.1 Waste treatment methods Advice on disposal and packaging : Disposal: In accordance with local and national regulations. Do not dispose of waste into sewer. Do not dispose of together with household waste. Waste codes should be assigned by the user based on the application for which the product was used. The following Waste Codes are only suggestions: Waste Code (EWC) : Waste Key (unused product): , mineral-based non-chlorinated engine, gear and lubricating oils Waste key (used product): , mineral-based non-chlorinated engine, gear and lubricating oils Disposal of uncleaned packaging : Waste key (uncleaned packaging): , packaging containing residues of or contaminated by dangerous substances Note: Empty containers should be taken to an approved waste handling site for recycling or disposal. Dispose of as unused product. 14. Transport information ADR Not dangerous goods RID Not dangerous goods IATA Not dangerous goods IMDG Not dangerous goods 9 / 11

10 Special precautions for user see chapter: 6, 7 and Regulatory information 15.1 Safety, health and environmental regulations/legislation specific for the substance or mixture Directive 96/82/EC : Update: 2003 Directive 96/82/EC does not apply 15.2 Chemical Safety Assessment 16. Other information Full text of R-phrases referred to under sections 2 and 3 R38 Irritating to skin. R52/53 Harmful to aquatic organisms, may cause long-term adverse effects in the aquatic environment. R53 May cause long-term adverse effects in the aquatic environment. Full text of H-Statements referred to under sections 2 and 3. H315 Causes skin irritation. H412 Harmful to aquatic life with long lasting effects. H413 May cause long lasting harmful effects to aquatic life. The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. 10 / 11

11 Attachment to the Material Safety Data Sheet Involved parts U7J AA 300 ml 11 / 11