FEATURES. **Caution: Temperature and pressure affect the strength and chemical resistance of plastic and rubber.

Transcription

1 ACCU-PULSE I Pulsation Dampeners Chargeable / Plastic / Dome Top lightweight, compact design 150 psi rating extensive range of materials Technical Data FEATURES remove pulsating flows from positive displacement pumps increase system efficiency and pump life decrease maintenance and costs protect pipes, meters, instruments, valves, gaskets and seals from pulsation and vibration ensure meter accuracy, longevity and repeatability reduce pressure fluctuations and diaphragm wear prevent foaming and splashing easy in-line maintenance 2 year warranty Unit Capacity: 10 CU In Weight: 1 pound Air Control: Gas Fill Valve Inlet Port: 1/2" NPTF, optional 3/8" NPTF Pressure Limit: 150 psi at 70 F ** Shell Materials: Polypropylene, PVC, PVDF Elastomers: Neoprene, Buna-N, EPDM, Viton, Hypalon, Teflon **Caution: Temperature and pressure affect the strength and chemical resistance of plastic and rubber. PRIMARY FLUID SYSTEMS INC. Call Toll Free Tel (905) Fax (905) primary@primary fluid.com

2 ACCU-PULSE I Operation: ACCU-Pulse pulsation dampeners operate on the principal that volume is inversely proportional to pressure. Compressed air or gas is introduced into the top section of ACCU-Pulse to a specified pressure that must be lower than the pump's discharge pressure. When a pump or valve introduces a pulse, fluid enters the dampener and compresses the trapped gas. The fluid remains in the dampener until the system pressure returns to normal, when the valve is reopened or the pump begins its next cycle. The fluid is then pushed back into the system piping as the trapped gas expands. ACCU-Pulse does NOT restrict fluid flow, or increase system pressure. ACCU-Pulse fills the fluid voids and pressure fluctuations created by reciprocating pumps. Typical Installations: Pulsation Dampeners Dimensions: Parts Description: Item Part # Qty Description Material ^ 1 Wetted Housing PVC P ^ Wetted Housing GF Polypropylene K ^ Wetted Housing PVDF 10X-050 Wetted Housing CPVC Bladder Neoprene Bladder EPDM Bladder Buna-N Bladder Hypalon Bladder Viton Bladder Aflas P Bladder (PVC & PP) Teflon K Bladder (PVDF) Teflon 3A NonWetted Housing PVC P NonWetted Housing GF Polypropylene K NonWetted Housing PVDF 10X-024 NonWetted Housing CPVC Fastener Assembly S/S ( Set of 6 ) Chargeable Air Assembly Plastic, Brass, S/S ^ add suffix -0 for units with 3/8" connections ^ add suffix -1 for units with 1/2" connections Recommended Spare Parts WA SA & NT VIC & TAS NSW & ACT Call Toll Free QLD (08) (08) (03) (02) (07) Tel: 3802 (905) hydramet@hydramet.com.au hydrasa@hydramet.com.au hydravic@hydramet.com.au hydransw@hydramet.com.au hydraqld@hydramet.com.au Fax: (905) Distribution Territories Available E:Mail: primary@primaryfluid.com Registered Trade Mark of Primary Fluid Systems e 2

3 ACCU-PULSE II Pulsation Dampeners Chargeable / Plastic / Dome Top lightweight, compact design 150 psi rating extensive range of materials Technical Data PRIMARY FLUID SYSTEMS INC. FEATURES Call Toll Free Tel (905) Fax (905) remove pulsating flows from positive displacement pumps increase system efficiency and pump life decrease maintenance and costs protect pipes, meters, instruments, valves, gaskets and seals from pulsation and vibration ensure meter accuracy, longevity and repeatability reduce pressure fluctuations and diaphragm wear prevent foaming and splashing easy in-line maintenance 2 year warranty Unit Capacity: 85 CU In Weight: 6-7 pounds Air Control: Gas Fill Valve Inlet Port: 3/4" NPTF, optional 1" NPTF Pressure Limit: 150 psi at 70 F ** Shell Materials: Polypropylene, PVC, PVDF Elastomers: Neoprene, Buna-N, EPDM, Viton, Hypalon, Teflon **Caution: Temperature and pressure affect the strength and chemical resistance of plastic and rubber. primary@primary fluid.com

4 ACCU-PULSE II Pulsation Dampeners Operation: ACCU-Pulse pulsation dampeners operate on the principal that volume is inversely proportional to pressure. Compressed air or gas is introduced into the top section of ACCU-Pulse to a specified pressure that must be lower than the pump's discharge pressure. When a pump or valve introduces a pulse, fluid enters the dampener and compresses the trapped gas. The fluid remains in the dampener until the system pressure returns to normal, when the valve is reopened or the pump begins its next cycle. The fluid is then pushed back into the system piping as the trapped gas expands. ACCU-Pulse does NOT restrict fluid flow, or increase system pressure. ACCU-Pulse fills the fluid voids and pressure fluctuations created by reciprocating pumps. Typical Installations: Dimensions: Parts Description: Item Part # Qty Description Material 1 * ^ 1 W etted Housing PVC * ^ W etted Housing GF Polypropylene * ^ W etted Housing PVDF Bladder Neoprene Bladder EPDM Bladder Buna-N Bladder Hypalon Bladder Viton Bladder Aflas Bladder Teflon 3A * NonW etted Housing PVC * NonW etted Housing GF Polypropylene Ring Band Assy GF Noryl Gauge Plastic / Brass Fill Valve Brass ^ add suffix -2 for units with 3/4" connections ^ add suffix -3 for units with 1" connections * add suffix T for Wetted & NonWetted Housing withteflon Bladders Recommended Spare Parts WA Distributed by: SA & NT VIC & TAS PRIMARY FLUID NSW & Call ACT Toll Free QLD (08) (08) (03) SYSTEMS INC. (02) (07) Tel: (905) Fax: (905) hydramet@hydramet.com.au hydrasa@hydramet.com.au hydravic@hydramet.com.au hydransw@hydramet.com.au hydraqld@hydramet.com.au Distribution Territories Available E:Mail: primary@primaryfluid.com Registered Trade Mark of Primary Fluid Systems 2 e

5 ACCU-PULSE III Pulsation Dampeners Chargeable / Plastic / Dome Top lightweight, compact design 300 psi rating extensive range of materials Technical Data FEATURES remove pulsating flows from positive displacement pumps increase system efficiency and pump life decrease maintenance and costs protect pipes, meters, instruments, valves, gaskets and seals from pulsation and vibration ensure meter accuracy, longevity and repeatability reduce pressure fluctations and diaphragm wear prevent foaming and splashing easy in-line maintenance 2 year warranty Unit Capacity: 370 CU In Weight: pounds Air Control: Gas Fill Valve Inlet Port: 2" NPTF Pressure Limit: 150 psi at 70 F ** Shell Materials: Polypropylene, PVC, PVDF Elastomers: Neoprene, Buna-N, EPDM, V iton, Hypalon, Teflon **Caution: Temperature and pressure affect the strength and chemical resistance of plastic and rubber. PRIMARY FLUID Call Toll Free SYSTEMS INC. Tel (905) Fax (905) primary@primary fluid.com

6 ACCU-PULSE III Pulsation Dampeners Operation: ACCU-Pulse pulsation dampeners operate on the principal that volume is inversely proportional to pressure. Compressed air or gas is introduced into the top section of ACCU-Pulse to a specified pressure that must be lower than the pump's discharge pressure. When a pump or valve introduces a pulse, fluid enters the dampener and compresses the trapped gas. The fluid remains in the dampener until the system pressure returns to normal, when the valve is reopened or the pump begins its next cycle. The fluid is then pushed back into the system piping as the trapped gas expands. ACCU-Pulse does NOT restrict fluid flow, or increase system pressure. ACCU-Pulse fills the fluid voids and pressure fluctuations created by reciprocating pumps. Typical Installations: Dimensions: Parts Description: Item Part # Qty Description Material W etted Housing PVC W etted Housing GF Polypropylene ^ W etted Housing PVDF Bladder Neoprene Bladder EPDM Bladder Buna-N Bladder Hypalon Bladder Viton Bladder Aflas Bladder Teflon 3A NonW etted Housing PVC ^^ NonW etted Housing GF Polypropylene Ring Band Assem bly GF Noryl Gauge Plastic / Brass F ill V alve B ras s ^ add suffix for W etted Housing and Teflon Bladder APIIIF only ^^ used with Polypropylene and PVDF units Recom m ended Spare Parts Distributed by: PRIMARY FLUID Call Toll Free WA SA & NT VIC & TAS SYSTEMS INC. NSW & ACT QLD Tel: (905) (08) (08) (03) (02) Fax: (07) (905) hydramet@hydramet.com.au hydrasa@hydramet.com.au hydravic@hydramet.com.au hydransw@hydramet.com.au hydraqld@hydramet.com.au E:Mail: primary@primaryfluid.com Distribution Territories Available Registered Trade Mark of Primary Fluid Systems e 19