|
|
|
- Benjamin Dean
- 5 years ago
- Views:
Transcription
1 BLISS ANAND Sight Flow Indicator
2
3 Sight Flow Indicator Index: Model 03 Screwed 04 Flanged 05 Pressure Drop Chart 06 Material of Construction 07 Notes 08 1
4 2 Sight Flow Indicator
5 SIGHT FLOW INDICATORS Sight Flow Indicators provide an effective way to view the condition of liquids or solids flowing through pipelines at most any flow, pressure, or temperature, a major advantage over electronic devices where it is difficult to distinguish if there is a flow problems or malfunction in the device. Bliss Anand Sight Flow Indicators assure a direct and positive indication of flow rate, flow direction and condition of the medium being transported plus enable a means of inspecting pipelines for dirt, scale and foreign matter. MODEL - Flapper, Rotary and Drip Designs Flapper models indicate flow by the position of a vane or flapper in the center of the viewing window and are recommended for applications involving transparent or slightly opaque solutions. Frequently specified to indicate the variations in the flow rate of gases as well as liquids. Flapper models are bidirectional designed for horizontal and upward vertical flow applications. When it is not necessary to visualize flow motion, the same basic sight flow indicator is supplied without a flapper component. Rotary models indicate flow by the spinning of a rotor and are suitable for any flow direction and are especially suited for applications involving dark solutions. The rotor motion is easily seen, even from great distances and recommended for uses with transparent solutions or gases. Rotors are supplied in materials that are impervious to many kinds of fluids and should be used if the flow rate is to be detected. Drip models are for vertical downward flow applications in distillation and similar systems involving extremely low or intermittent flow. A strong advantage of a drip model is absolutely no obstruction to downward flow. Plain models without drip tubes operate effectively with flow in any direction and those with tubes have them positioned in the center window area for ease of observation. 3
6 SIGHT FLOW INDICATORS DOUBLE WINDOW SIGHT FLOW INDICATORS SCREWED MODEL S Recommended for any flow direction, Style 1000S rotary type indicator is best suited to lines carrying dark solutions where rotor motion is easily detected. It can be used with transparent solutions and gases and is ideal where observation must be at a distance. MODEL S MODEL S Recommended for both horizontal and upwards vertical flow. Style 2000-S is best suited to transparent or slighty opaque solutions. It is frequently used for gases and can be supplied without a flapper if no internal indicator is required. In standard units the position of the hinged flap indicates variation in flow rate. MODEL S MODEL S Recommended for downward vertical flow. Style 3000S is particularly suited to distillation and similar apparatus with intermittent flow. Drip type indicator do not obstruct flow in any way and many also be used for horizontal flow. MODEL S MODEL S # PIPE SIZE ½ ¾ 1 1¼ 1½ 2 DIMENSIONS (mm) L D PRESSURE RATING PSIG 4
7 SIGHT FLOW INDICATORS DOUBLE WINDOW SIGHT FLOW INDICATORS FLANGED MODELS F For pipe size 1 thru 6 with any flow direction. Best suited to lines motion is easily detected. It can be used with transparent solutions observations must be made at a distance. MODEL F MODEL F For pipe sizes ½ thru 12 in horizontal lines or vertical lines with upward flow. Style 2000F is best suited to transparent or slightly opaque solutions and may be used for gases. Variation in flow rates is indicated by position of the flapper. All sizes are supplied without flapper on order. 14 and 16 sizes are available without flapper only. MODEL F MODEL F For pipe sizes ½ thru 10 in lines with vertical downward flow. Drip type indicators are particularly suited to distillation or similar apparatus with intermittent flow MODEL F MODEL F # MODEL F # PIPE DIMENSIONS PR. RATING PIPE DIMENSIONS (mm) PR. RATING SIZE L D PSIG SIZE L D PSIG mm inch mm inch mm inch mm inch ½ & ¾ ½ & ¾ ½ ½ ½ & ½ & / / / / /150 5
8 SIGHT FLOW INDICATORS PRESSURE DROP CHART Rotating Indicator PRESSURE DROP PSI Rotating Paddle Indicator FLOW GMP WATER Flapper Indicator Flapper Indicator PRESSURE DROP PSI FLOW GMP WATER
9 SIGHT FLOW INDICATORS MATERIAL OF CONSTRUCTION Body - Material A 216 Grade WCB A 351 Grade CF8 A 351 Grade CF8M A 351 Grade CF3 A 351 Grade CF3M A 217 Grade WC6 A 182 F 11 A 182 F 51 A 182 F 5 Special Cover - Material A 216 Grade WCB A 351 Grade CF8 A 351 Grade CF8M A 351 Grade CF3 A 351 Grade CF3M A 217 Grade WC6 A 182 F 11 A 182 F 51 A 182 F 5 Special * Steam Jack available on request * Teflon lined Sight Glass also available on request 7
10 8 Notes
11 9
12 BLISS ANAND Manufacturing Units: AMERICAS Bliss Anand, America 6614, Bourgeois Road, Houston, Texas Ph. : (281) , Fax: (281) sales.usa@blissanand.com sales@blissanandusa.com MIDDLE EAST GLOBAL ENGG. SOLUTION FZCO (A 100% Subsidiary of BLISS ANAND-INDIA) P. O. Box: 18576, RA 08, WF 04, Jebel Ali Free Zone, Dubai, U.A.E. Ph. : Fax : gages@eim.ae ASIA Bliss Anand Pvt. Ltd. 92 B & 93 B, Sector - 5, IMT Manesar, Gurgaon, Haryana (INDIA) Ph. : (10 Lines) Fax : sales@blissanand.com # BA HOUSTON DUBAI KAZAKHSTAN THAILAND CANADA INDIA BLISS ANAND: The spirit to walk an extra mile Worldwide:
Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300 DN 40, 50, 65
Data Sheet 819346-02 Issue Date: 05/17 Ball Float Steam Trap UNA 45 MAX, UNA 46 MAX, UNA 46A MAX PN 40/Class 300, 50, 65 UNA 45hl MAX, UNA 46hl MAX, UNA 46Ahl MAX UNA 45v MAX with cover for mounting electrode
SAFEGUARD ROTAMETERS GENERAL PURPOSE GLASS TUBE METERS FOR MEDIUM AND HIGH FLOWS FEATURING UNIVERSAL END FITTINGS
SPECIFICATIONS & SIZING DATA / BULLETIN 20-5000 SAFEGUARD ROTAMETERS GENERAL PURPOSE GLASS TUBE METERS FOR MEDIUM AND HIGH FLOWS FEATURING UNIVERSAL END FITTINGS SAFEGUARD ROTAMETERS--FEATURES Universal
BULLETIN FOR ACCURATE INDICATION AND CONTROL OF GAS AND LIQUID FLOW IN LOW RANGES.
BULLETIN 20-7000 ROTAMETERS PURGE FOR ACCURATE INDICATION AND CONTROL OF GAS AND LIQUID FLOW IN LOW RANGES. INTRODUCTION McCrometer purge rotameters are precision-made instruments designed to accurately
Ball Float Steam Trap UNA 43 PN 16/CL 125/JIS 10K UNA 46 PN 40/CL 150/CL 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6"
Data Sheet 819584-00 Issue Date: 01/17 Ball Float Steam Trap UNA 43 PN 16/C 125/JIS 10K UNA 46 PN 40/C 150/C 300/JIS 10K/JIS 20K DN 80, 100, 150, 3", 4", 6" UNA 43 hl, UNA 46 hl UNA 43 v, UNA 46 v with
V DFX Series. Direct-Operated Tank Blanketing Regulator Manual D103808X012
V2015.2 DFX Series Direct-Operated Tank Blanketing Regulator Manual D103808X012 Contents 1. Introduction... 3 2. Specifications... 3 3. Features... 3 4. Dimensions... 4 5. Principle of Operation... 4 6.
OPERATING AND MAINTENANCE MANUAL
Series 4300 Engineered Performance TABLE OF CONTENTS 0 INTRODUCTION 1 1 Scope 1 2 Description 1 3 Specifications 1 0 INSTALLATION 1 1 Mounting 1 2 Piping 1 1 Connecting Process Pressure 2 2 Vent Connections
DISSOLUTION TEST FOR SOLID DOSAGE FORMS
Seite 1 von 15 01/2010:20903 corrected 6.8 2.9.3. DISSOLUTION TEST FOR SOLID DOSAGE FORMS This test is provided to determine compliance with the dissolution requirements for solid dosage forms administered
MEMORIAL UNIVERSITY OF NEWFOUNDLAND Faculty of Engineering and Applied Science FLUID MECHANICS LABORATORY PIPE FRICTION
MEMORIAL UNIVERSITY OF NEWFOUNDLAND Faculty of Engineering and Applied Science FLUID MECHANICS LABORATORY PIPE FRICTION Objective To estimate the fluid pressure drops and roughness specifications for copper
Technical Data Sheet T 2025
Self-operated emperature Regulators emperature Regulator ype 4 Valve closes when the temperature rises. emperature Regulator ype 4u Valve opens when the temperature rises. Balanced single-seated globe
Variable Area Flow Meters
Variable Area Flow Meters Over sixty years of variable area meter expertise Brooks started designing and manufacturing variable area (VA) meters, also referred to as rotameters, in 1946. Now, with more
DOUBLE WINDOW SIGHT FLOW INDICATOR
Page : Page 1 of 19 MODEL 610-F MODEL 965-F DOUBLE WINDOW SIGHT FLOW INDICATOR Page : Page 2 of 19 TABLE OF CONTENTS Detail Page No Product Warranty 3 Disclaimer of Warranties 4 Limitation of Sellers s
L21S/SR/ST Glass Level Gauges
L21S/SR/ST Glass Level Gauges Doc. no.: 150, en_cat_l21s/sr/st, 12/2014 Type of code Example: L21ST/1450/AANSI 3/4 150Lb RF/Large chamber Code 1 Basic type L21 2 Type of gauge S Tubular level gauge SR
Dean Pump Self-Priming Chemical Process Pumps
Bulletin C 1.2.34.7 Dean Pump Self-Priming Chemical Process Pumps php Series HEAD CAPACITY RANGE CHARTS php Self Primer - 2 Pole 3500 RPM 500 CAPACITY M 3 /HR 2900 RPM 50 HERTZ 25 50 75 125 150 400 TOTAL
Vol. IX, No. 8
Vol. IX, No. 8 www.flowcontrolnetwork.com WHEN COST IS A FACTOR Are you going down the right road with a rotameter? T hey re simple and inexpensive, performing as well or better than many high-tech flowmeters
Types 749B and R130 Changeover Manifolds
Instruction Manual MCK-1179 Types 749B and R130 June 2012 Types 749B and R130 Changeover Manifolds TYPE HSRL-749B TYPE 64SR/122 TYPE R130/21 TYPE 749B/21 Figure 1. Changeover Manifolds and Regulator Assemblies
HIGH PRESSURE CONTROL VALVES
METERING VALVE APPLICATIONS: This valve can be used to meter or control flow of liquids and/ or gases on meter runs, flow lines, or may be used as a choke under low pressure drop conditions where freezing
1800C and 1800C-HC Series Service Regulators
1800C and 1800C-HC Series Service Regulators Installation Instructions www.elster-americanmeter.com General Information: The 1800C and 1800C-HC Regulators are available as Full Capacity Internal Relief
Compatible with a Wide Range of Gases or Liquids for Laboratory or Plant Applications
Riteflow Flowmeters Compatible with a Wide Range of Gases or Liquids for Laboratory or Plant Applications Used for flow measurements in the lab, process flows in pilot plants, metering carrier gases in
Casing Spacer Technology Leaders
Casing Spacer Technology Leaders Benefit today. Save down the line. www.racispacers.com NORTH AMERICA Why Raci Raci has been the global leader in casing spacer technology since 1952. Our uniquely designed,
Variable Area Flow Meters
PDF Published May, 04 Variable Area Flow Meters Chemline F Series Variable Area Flow Meters are ideal for plastic piping. They provide a combination of accurate visual flow rate measurement and clear flow
Sight Flow Indicators 300# & 600# ANSI Models:
1ARCHON TM INDUSTRIES, INC. Sight Flow Indicators 300# & 600# ANSI Models: Flanged Threaded AKF-FM, AKF-FH AKF-SM, AKF-SH Installation / Operation / Maintenance Instructions ARCHON INDUSTRIES, INC. 357
3-way control valves VK 3
Data sheet 3-way control valves VK 3 Description / Application VK 3 valves are a range of 3 port high specification flanged valves for chilled water, LPHW, MPHW, HPHW (low, medium or high pressure hot
Performance Literature for J48. Gas Pressure Regulators 2½ 6 Sizes. Catalogue
Catalogue and Performance Literature for J48 Gas Pressure Regulators 2½ 6 Sizes Catalogue General Information CS4807C Regulating Capacity Flow Capacity Figures 2½ & 3 DS4819A Flow Capacity Figures 4 &
PRESSURE REGULATOR PRESSURE REDUCING. APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure
PRESSURE REGULATOR PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure PRESSURE RANGE: Ductile Iron: Upstream: psig to 125
Installation, Operating and Maintenance Instructions. V914 Cast Iron Flanged Swing Check Valve V914
Installation, Operating and Maintenance Instructions V914 Cast Iron Flanged Swing Check Valve V914 THE PRESSURE EQUIPMENT DIRECTIVE 97/23/EC and CE MARKING The Pressure Equipment Regulations 1999 (SI 1999/2001)
1800C and 1800C-HC Service Regulators
SB 855.9 800C and 800C-HC Service Regulators Maximum Pressure 5 Table of Contents 800C Regulator Information...................... 800C-HC Regulator Information.................. 800C and 8C Service Regulators...............
Cash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES. ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified
Cash Valve TYPE G-4 PILOT OPERATED PRESSURE REDUCING REGULATOR FOR STEAM, AIR AND GASES ISSUED - MARCH 2001 CAVMC-0512-US-0208 ISO 9001 Certified TYPE G-4 DESCRIPTION FIG 2042 - Bronze FIG 2043 - Bronze
Installation Instructions
Installation Instructions Durametallic MD-200 Series Gas Dual Cartridge Canister Seal for Mixers and Agitators Experience In Motion 1 Equipment Check 1.1 Follow plant safety regulations prior to equipment
1.0 - OPENING AND CLOSING THE DOOR
The purpose of this manual is to provide the user with instructions on how to safely open and close, how to conduct routine maintenance, and how to install the PEI TWINLOCK Closure on a pressure vessel.
T EK-COR 1100A. Coriolis Mass Flowmeter. FLOW. Technology Solutions
Technology Solutions T EK-COR 1100A Coriolis Mass Flowmeter FLOW www.tek-trol.com Flow Level Temperature Pressure Valves Analyzers Accessories TekValSys Introduction There can often be more than one type
Dual Solenoid Gas Valve Installation
Installation IMPORTANT: These instructions are intended as a guide for qualified personnel installing or servicing FLYNN Gas Products. Carefully follow all instructions in this bulletin and all instructions
BaseCal 3, calculating the performance of Diaphragm Seals
BaseCal 3, calculating the performance of Diaphragm Seals BASECAL: THE DIAPHRAGM SEAL PERFORMANCE CALCULATION TOOL BaseCal is the web-based performance calculation tool for diaphragm seal applications,
Cash Valve. Type G-4. Pilot Operated Pressure Reducing Regulator for Steam, Air and Gases. Flow Control
Cash Valve Type G-4 Pilot Operated Pressure Reducing Regulator for Steam, Air and Gases Issued - March 2001 CAVMC-0512-US-0609 ISO 9001 Certified Flow Control Description FIG 2042 - Bronze FIG 2043 - Bronze
SCREEN OPENINGS FOR STRAINERS
SCREEN OPENINGS FOR STRAINERS 100 Mesh - 30% O.A. 0.006 Openings 80 Mesh - 36% O.A. 0.008 Openings 60 Mesh - 38% O.A. 0.010 Openings 40 Mesh - 41% O.A. 0.016 Openings 30 Mesh - 45% O.A. 0.022 Openings
Installation Operation Maintenance
682 Seal Cooler New generation seal cooler to meet and exceed the seal cooler requirements stated in the 4th Edition of API Standard 682 Installation Operation Maintenance Experience In Motion Description
Fisher 8532 High-Performance Butterfly Valve
Product Bulletin D101552X012 852 Valve Fisher 852 High-Performance Butterfly Valve The Fisher 852 high-performance butterfly valve (figure 1) provides outstanding performance under extreme pressure and
3" 24" 80A 600A DN80 DN600 Body size The largest size manufactured : 60" (1500A) Disc form Damper type Trim materials Trim treatment
STANDARD SPECIFICATION SS-CE-600B-A JUL. 2004 600B Disc Damper Type Butterfly Valve GENERAL 600B STANDARD SPECIFICATIONS BODY Series 600B This series 600B is a wafer type butterfly valve, designed to be
Model 1800 PFM Series Regulator For Constant Outlet Pressure Precise Fixed Factor Measurement From 0.5 to 30 PSIG
A C E D SB 8551.3 Model 1800 PFM Series Regulator For Constant Precise Fixed Factor Measurement From 0.5 to 30 G AMC Quality System QMI is Accredited by: C R E D I T ISO 900 Registered R E ANSI RAB G I
Type R622 Pressure Reducing Regulator
Type R622 Pressure Reducing Regulator June 2010 Compact Design Protective Inlet Screen High Capacity Internal Relief Light Weight W8806 Inlet and Outlet Pressure Gauge Taps Figure 1. Type R622 Pressure
CLASS TLP Pressure Reducing Valve
CLASS TLP Pressure Reducing Valve CLASS TLP Direct Acting Pressure Reducing Valve The Class TLP balanced direct acting pressure regulator is designed for use on installations that have varying inlet pressures
! WARNING. Model PFC-1-G (direct acting) PFC-1-GR (reverse acting) Modulating Pneumatic Liquid Level Controls INSTRUCTION MANUAL MM-110B
INSTRUCTION MANUAL MM-110B Model PFC-1-G (direct acting) PFC-1-GR (reverse acting) Modulating Pneumatic Liquid Level Controls APPLICATIONS: Use with other pneumatic devices, for liquid level sensing in
V DGX Series. Direct-Operated Regulators Manual D103834X012
V2015.3 DGX Series Direct-Operated Regulators Manual D103834X012 Contents 1. Introduction... 3 2. Specifications... 3 3. Features... 3 4. Dimensions... 4 5. Principle of Operation... 5 6. Performance Curves...
Model: 43T. Bermad Pressure Relief Valve
Model: 43T Bermad Pressure Relief Valve Installation Operation Maintenance Manual () Rev.C1_01.08.17 Page 1 of 10 Safety First BERMAD believes that the safety of personnel working with and around our equipment
Adjustment & Calibration Instructions
Adjustment & Calibration Instructions For Dixon Bayco 2180 AND 3180 ADJUSTABLE AIR RELIEF VALVES For Sales and Service Contact USA: Dixon Bayco USA Chestertown, Maryland Phone: 410-778-2000 Fax: 410-778-4702
PENBERTHY SERIES LM, ELL, FL, GL, GH, U, L AND 2NC FOR PUMPING GASES
Practical, simple and cost-effective alternatives for process industries to purge gases from chambers, exhaust, evacuate or prime using liquid, steam or air operating media FEATURES Simple design with
29 SERIES - SAFETY VALVE
INDUSTRIES, INC. 29 SERIES - SAFETY VALVE INSTALLATION, OPERATION, & MAINTENANCE Part I Document Number: ES1016-1 Revision Level: A Issued By: David Edmonds Date: 6/20/04 Approved By: Date: 10/4/04 Conbraco
Diaphragm Seal Solutions making your measurements work
Diaphragm Seal Solutions making your measurements work Badotherm We are a Dutch family owned company, headquartered in the Netherlands, with over 50 years of experience in the field of process instrumentation.
S300 Series. Valve Link. Features. Fisher Controls
S0 Series Self-Operated Type VL FIELDVUE Regulators Valve Link Fisher Controls May 198 Bulletin 71.1:S0 The S0 Series self-operated, spring-loaded regulators are used for pressure-reducing control in a
VISI-FLO Sight Flow Indicators
Leading The Way in Fluid Handling Solutions Worldwide VISI-FLO Sight Flow Indicators Document No. H32199PA Revised: February, 2016 OPW Engineered Systems has been manufacturing sight flow indicators for
1213B2 Service Regulators Maximum Inlet Pressure 125 PSIG
SB-8506. B Service Regulators Maximum Inlet Pressure 5 PSIG Measurement Engineers Since 86 www.americanmeter.com B Service Regulators General Information The American Meter Series B pressure regulator
Model 1800 PFM Series Regulator. Technical Bulletin
Model 0 PFM Series Regulator Technical Bulletin Model 0 PFM Series Regulator 0 Elster American Meter The 0 PFM Series regulators are designed to control natural gas, air, nitrogen, carbon dioxide, propane
INSTALLATION, OPERATION AND MAINTENANCE GUIDE
INSTALLATION, OPERATION AND Placement in Pipeline System When installing Process Development & Control s ElastoTITE Elastomer-Hinged Check Valves in a pipeline, a minimum of five pipe diameters should
61R2 STANDARD REGULATOR COMPACT REGULATOR. Phone Fax
6R STANDARD REGULATOR COMPACT REGULATOR 496 Phone 7.63.888 Fax 7.63.690 6R AND 496 REGULATORS General Information The Model 6R and 496 Compact Regulator (CR) are designed to deliver reliable and safe regulation
Model PRS-07i. Stainless Steel Low Pressure, In-Line Pressure Regulator (Reducing Valve)
Phone (toll-free): (888) 380-9660 Phone (local): (973) 340-9955 Fax: (973) 340-9933 Web: www.straval.com 21 Columbus Avenue Garfield, NJ 07026 Model PRS-07i Stainless Steel Low Pressure, In-Line Pressure
TRZ 03-K Volumeter. Proven Technology. Superior Performance. TRZ 03-K Volumeter is a Turbine Gas Flowmeter for Secondary Gas Metering.
TRZ 0-K Volumeter TRZ 0-K Volumeter is a Turbine Gas Flowmeter for Secondary Gas Metering. TRZ 0-K Turbine Gas Flowmeter continues the tradition of Honeywell s field-proven turbine meter technology, delivering
Series 100 Slam Shut Valve. Technical Bulletin
Series 100 Slam Shut Valve Technical Bulletin 02 Elster The Series 100 Slam Shut protects gas installations against overpressure conditions by automatically shutting off the gas flow. General Information
DUPLEX TECHNICAL INFORMATION FABRICATED DUPLEX STRAINERS
DUPLEX STRAINER TECHNICAL INFORMATION - 119 - SCREEN OPENINGS 100 Mesh - 30% O.A. 0.006 Openings 80 Mesh - 36% O.A. 0.008 Openings 60 Mesh - 38% O.A. 0.010 Openings 40 Mesh - 41% O.A. 0.016 Openings 30
Armored Gauge O S & Y Bolted Bonnet Valves Series BB-100
Industries, Inc. Armored Gauge O S & Y Bolted Bonnet Valves Series BB-100 INSTALLATION / OPERATION / MAINTENANCE INSTRUCTION February 22, 2002 Instr. # 1012 Approved: K. Mayer, Engineering Manager 1 TABLE
Bristol Thermometer Systems Class 1 - Liquid Filled
801ds4b / D301571X012 April 22, 2008 - Page 1 There are two types of Liquid-Filled Thermometer Systems available. Class 1A - Fully-compensated, and Class 1B - Case-compensated. Class 1A Systems are designed
T208VR Series Tank Blanketing Vacuum Regulator
February 2014 T208VR Series Tank Blanketing Vacuum Regulator Figure 1. Typical T208VR Series Vacuum Regulator Introduction The T208VR Series direct-operated vacuum regulators are used where a decrease
Another convenient term is gauge pressure, which is a pressure measured above barometric pressure.
VACUUM Theory and Applications Vacuum may be defined as the complete emptiness of a given volume. It is impossible to obtain a perfect vacuum, but it is possible to obtain a level of vacuum, defined as
Pressure Reducing Valves Pressure Reducing with. Broady Flow Control. D Series Range. Pressure Reducing Valves. Broady Flow Control
Pressure Reducing Valves 00 Pressure Reducing with Broady Flow Control D Series Range Pressure Reducing Valves Broady Flow Control The Company Broady Flow Control is an Independent Valve Manufacturer,
Plumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE.
Plumbing Products FLOOR DRAIN CLEANOUT GATE VALVE BALL VALVE www.wilsontaylor.co INTRODUCTION Wilson Taylor Asia Pacific, headquartered in Singapore with a subsidiary based in Hong Kong and a representative
1200B2 Series Service Regulators. Instruction Manual
00B Series Service Regulators Instruction Manual 00B Series Service Regulators 0 Elster American Meter 00B Series Service Regulators General Information The 00B Series Service Regulators are available
THE INNER WORKINGS OF A SIPHON Jacques Chaurette p. eng. January 2003
THE INNER WORKINGS OF A SIPHON Jacques Chaurette p. eng. www.lightmypump.com January 2003 Synopsis The objective of this article is to explain how a siphon works. The difference between low pressure, atmospheric
PRESSURE REDUCING VALVE RP45 (ANSI)
PRESSURE REDUCING VALVE RP45 (ANSI) DESCRIPTION The RP45 series pressure reducing valves are single seat bellows sealed controllers, operating without auxiliary energy, designed for use on steam, compressed
HIGH PRESSURE CONTROL VALVES
METERING VALVE APPLICATIONS: This valve can be used to meter or control flow of liquids and/ or gases on meter runs, flow lines, or may be used as a choke under low pressure drop conditions where freezing
Performance Literature for J78. Gas Pressure Regulators ½, ¾ and 1 Sizes. Catalogue
Catalogue and Performance Literature for J78 Gas Pressure ½, ¾ and 1 Sizes Catalogue General Information Regulating Capacity Flow Capacity Figures Full Open Capacity Flow Capacity Figures Full Open Capacity
OPERATION and MAINTENANCE Guide
Catalog No. AIR1000 Winch and Hoist OPERATION and MAINTENANCE Guide Cat. No. AIR1000 1250 Lb. Single Line Pull READ THIS BEFORE OPERATING UNIT INSTALLATION: Mount on clean, flat surface. Use 1/2" mounting
Pilot Assembly Motor Valve Stem Assembly Upstream Pressure Downstream Pressure Motor Valve Diaphragm Pressure. Adjusting Screw.
GAS PRESSURE REDUCING BALANCED APPLICATIONS: Regulation of inlet pressure to gas compressors and control of supply or distribution system pressures where the pressure to the regulator varies significantly
Applied Fluid Mechanics
Applied Fluid Mechanics 1. The Nature of Fluid and the Study of Fluid Mechanics 2. Viscosity of Fluid 3. Pressure Measurement 4. Forces Due to Static Fluid 5. Buoyancy and Stability 6. Flow of Fluid and
TFE-LINED VAREA-METER PVC-TUBE VAREA-METER
TFE-Lined Varea-Meter PVC-Tube Varea-Meter USFilter s Wallace & Tiernan Products offers a choice of two straight-through rotameters for metering difficult fluids and gases. The TFE-lined Varea-Meter is
Spring Loaded Regulators Constant Loaded Regulators Twin Parallel Flow Regulators Field Service Regulators
Product Line Brochure J0B Effective Date 2/01 Spring Loaded Regulators Constant Loaded Regulators Twin Parallel Flow Regulators Field Service Regulators P R O D U C T L I N E O V E R V I E W Regulator
Float Operated Level Controllers
CONTENTS Float Operated Level Controllers IM0015 Nov. 2014 PAGE Introduction 1 Scope 1 Description 1 Specification 1 Control Installation 2 INTRODUCTION Side Mount Back Mount Prior to installing, the instructions
Shafer RV-Series Rotary Vane Valve Actuators
Shafer RV-Series Rotary Vane Valve Actuators Product Data Sheet RV-ASDD-D-3-06-09 Rev. 1 November 2017 U.S. Customary Units Dimension: inches (in) Torque: Inch Pounds (in-lbs) Pressure: Pounds Per Square
61 Series Pilots for Pilot-Operated Pressure Reducing Regulators
61 Series Pilots for Pilot-Operated Pressure Reducing Regulators June 2011 Introduction 61 Series pilots are used with Types 1098-EGR and EZL pressure reducing regulators. These pilots can also be integrally
MODEL 200 KNIFE GATE VALVES INSTALLATION & MAINTENANCE MANUAL
MODEL 200 KNIFE GATE VALVES INSTALLATION & MAINTENANCE MANUAL Index 1. List of components / General arrangement 2. Description 3. Handling 4. Installation 5. Actuators / Operation 6. Maintenance a. Changing
ML3M Monnier Miniature Compressed Air Lubricator
5041050/3 IM-P504-04 CH Issue 3 ML3M Monnier Miniature Compressed Air Lubricator Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation and commissioning
North American Simplex Basket Strainers for Gas and Oil
Combustion North American Simplex Basket Strainers for Gas and Oil A mesh lining (304 stainless standard or 316 stainless or monel special), either 20, 40 or 100 mesh, can be provided, depending on the
Type 299 Pressure Reducing Regulators
Type 299 Pressure Reducing Regulators Fisher, Fisher-Rosemount, and Managing The Process Better are marks owned by Fisher Controls International, Inc. or Fisher-Rosemount Systems, Inc. All other marks
Models 461-S, 461-8S and S Regulators. R-1330 Rev. 7
Models 461-S, 461-8S and 461-12S Regulators R-1330 Rev. 7 461-S, 461-8S and 461-12S Regulators The Sensus Models 461-S, 461-8S and 461-12S are balanced valve, spring type regulators designed for distribution
Regulator from 1800 B series
Regulator from 1800 B series Regulator from 1800 B series Measuring of industrial gases frequently requests a precise pressure regulation for the purpose of dosage and proccesing. UNIS FAGAS has two kinds
Technical data. Back pressure limit: 27.5% of set pressure. Capacity certification: ASME Boiler & Pressure Vessel Code Section I and VIII
VALVES & CONTROLS CROSBY SAFETY VALVES H ig h C a p a c it y, S t e a m S e r v ic e, F la n g e d S t e e l S a f e t y V a lv e Introduction Crosby Style HSL is a full nozzle reaction type safety valve
FILTER BYPASS CONTROL
Differential Control Valve Series 110 The Series 110 Differential Control Valve is designed to accurately control the pressure difference between any two points. In some systems this means the valve remains
Serie 06-M6. Swing wafer check valve. made in. Application fields. Check valves E U R O P E WATER CONDITIONING INDUSTRY
Swing wafer check valve BRANDONI made in E U R O P E Application fields WATER CONDITIONING INDUSTRY HEATING 38 www.brandoni.it The valves in series 06 are swing wafer check valves, manufactured in accordance
PRESSURE REGULATORS GAS PRESSURE REDUCING
GAS PRESSURE REDUCING APPLICATION: Regulation of inlet pressure to gas compressors. Control of supply or distribution system pressure CERTIFICATIONS: Canadian Registration Number (CRN): 0C16234.24567890NTY
ABB measurement & analytics data sheet. JAA, JAF and JAG Pneumatic indicating controllers
ABB measurement & analytics data sheet JAA, JAF and JAG Pneumatic indicating controllers 2 JA A, JAF an d JAG P N EUMATI C I ndicating cont rollers DS/JAx_DBT_DTE-EN Rev. H Measurement made easy Engineered
Heat Engine. Reading: Appropriate sections for first, second law of thermodynamics, and PV diagrams.
Heat Engine Equipment: Capstone, 2 large glass beakers (one for ice water, the other for boiling water), temperature sensor, pressure sensor, rotary motion sensor, meter stick, calipers, set of weights,
Fig 1, Fig 12, Fig 13, Fig 14, Fig 16 and Fig 16L Strainers Installation and Maintenance Instructions
16355/5 IM-S6-17 ST Issue 5 Fig 1, Fig 12, Fig 13, Fig 14, Fig 16 and Fig 16L Strainers Installation and Maintenance Instructions 1 General safety information 2 General product information 3 Installation
MODEL 835-F SIGHT FLOW INDICATOR
Page : Page 1 of 18 MODEL 835-F SIGHT FLOW INDICATOR Page : Page 2 of 18 TABLE OF CONTENTS Detail Page No Product Warranty 3 Disclaimer of Warranties 4 Limitation of C-TRU s liability 4 Terms of Use 4
SITRANS F I Gardex. Flowmeter. SITRANS F I Intra/Prima. Flap Flowmeter. Contents. English. General 1. SITRANS F I Gardex 2. SITRANS F I Intra/Prima 3
Contents SITRANS F I Gardex Flowmeter English General 1 SITRANS F I Gardex 2 SITRANS F I Intra/Prima 3 SITRANS F I Intra/Prima Flap Flowmeter Instructions A5E00129182 Version 02 09/2003 SITRANS F ED Automatic
36E03 and 36E38 DSI and HSI Step Opening Combination Gas Valve INSTALLATION INSTRUCTIONS
INLET PRESS TAP WHITE-RODGERS 36E03 and 36E38 DSI and HSI Step Opening Combination Gas Valve INSTALLATION INSTRUCTIONS Operator: Save these instructions for future use! FAILURE TO READ AND FOLLOW ALL INSTRUCTIONS
Installation, Operation and Maintenance Manual for Back Pressure Regulator
Installation, Operation and Maintenance Manual for Back Pressure Regulator Model 8860 2009 Groth Corporation IOM-8860 Rev. B 12541 Ref. ID: 95565 Page 2 of 13 Table of Contents I. INTRODUCTION 3 II. DESIGN
Wallace & Tiernan Flow Measurement Equipment
Water Technologies Wallace & Tiernan Flow Measurement Equipment Glass Tube Varea-Meter Units Features Rugged, One-Piece Enclosure The welded, deep-formed frame is heavy gauge 302 stainless steel. It protects
Installation Manual , Rev BB December Micro Motion H-Series Hygienic Coriolis Flow and Density Sensors
Installation Manual 20002346, Rev BB December 2010 Micro Motion H-Series Hygienic Coriolis Flow and Density Sensors Safety and approval information This Micro Motion product complies with all applicable
Mass Flow Controller (MFC) for Gases
Mass Flow Controller (MFC) for Gases Type 8713 can be combined with... Direct flow measurement by MEMS- Technology for nominal flow rates from 1 ml N /min to 8 l N /min (N 2 ) High accuracy and repeatability
MZX. Three-Port Seat Valves SPECIFICIATIONS AND GUIDE TO SELECTION
01 These seat valves are of globe construction with a linear moving spindle and a modified parabolic characterised plug operating against the upper seat which controls flow quantity to suit the load. The
Features. General application. Technical data
Practical, simple and cost-effective alternatives for process industries to purge gases from chambers, exhaust, evacuate or prime using liquid, steam or air operating media Features Simple design with
711 DISSOLUTION. Portions of the present general chapter text that are national USP text, and therefore not part of the
Change to read: 711 DISSOLUTION This general chapter is harmonized with the corresponding texts of the European Pharmacopoeia and/or the Japanese Pharmacopoeia. The texts of these pharmacopeias are therefore
Sterile Visual Flow Indicator
Sterile Visual Flow Indicator Sanitary Process Connection Installation / Operation / Maintenance Manual P.O. Box 1116 Twinsburg, OH 44087 Phone: 330/405-3040 Fax: 330/405-3070 E-mail: view@ljstar.com Web