SAFETY DATA SHEET According to Regulation (EC) No 1907/2006 (REACH)

Transcription

1 SECTION 1 IDENTIFICATION OF THE SUBSTANCE / MIXTURE AND OF THE COMPANY / UNDERTAKING Product identifier : JEESILC IDD Relevant identified uses of the substance : Cosmetic formulations Details of the supplier of the safety data : JEEN International Corporation sheet 24 Madison Road Fairfield, New Jersey Tel: Contact teresa@jeen.com Emergency telephone number : (Chemtrec Int l Tel - Collect calls accepted) SECTION 2 HAZARDS IDENTIFICATION Classification of the substance or mixture According to Regulation (EC) No. : Not available. 1272/2008 According to Directive 1999/45/EC : R10, Xn R65 Label elements According to Regulation (EC) No. : Not available. 1272/2008 According to Directive 1999/45/EC : Harmful R10 Flammable R65 Harmful: may cause lung damage if swallowed S23 Do not breath vapor S24 Avoid contact with skin S62 If swallowed, do not induce vomiting: seek medical advice immediately and show this container or label Other hazards : None known. SECTION 3 COMPOSITION/INFORMATION ON INGREDIENTS Chemical characterization : Mixture of silicon polymer in branched aliphatic hydrocarbon. Composition according to the Regulation (EC) No 1272/2008 (CLP) and Directives 67/548/EEC (DSD): Name CAS EC Conc. (% w/w) Isododecane Dimethicone Crosspolymer-3 CLP Flam. Liq.3 Asp. Tox. 1 H226 H DSD - Xn R10 R65 JEESPERSE HD Page 1 of 5

2 SECTION 4 FIRST AID MEASURES Eyes : In case of contact, immediately flush eyes with copious amounts of water for at least 15 minutes. Get medical attention if irritation occurs. Skin : Wash contacted skin areas with water. Remove contaminated clothing. Get medical attention if irritation develops or persists. Ingestion : Do not induce vomiting. Consult a physician. Wash out mouth thoroughly with water and spit the fluids out. Inhalation : Remove to fresh air. Symptomatic treatment. Lay victim down in a quiet place and protect him against hypothermia. In the case of breathing difficulties have the victim inhale oxygen. Arrange medical treatment. SECTION 5 FIRE FIGHTING MEASURES Extinguishing media : CO 2,dry extinguishing powder, foam. Water is not suitable. Use water spray only to cool nearby containers and structures exposed to fire. Special hazards arising from the : Carbon oxides, silicon oxides and traces of incompletely burned carbon and substance or mixture silicon. Advice for fire-fighters : Self-contained breathing apparatus and full protective clothing should be worn. Cool surrounding containers with water spray. Heating causes a rise in pressure, risk of bursting and explosion. Take container out of dangerous zone. Shut off all sources of ignition. Stay on upwind side. SECTION 6 ACCIDENTAL RELEASE MEASURES Personal precautions protective : Use protective solvent-resistant equipment (for further details see section 8). equipment and emergency procedures In an emergency respiratory protection must be worn. Consider the maximum period for wear. A self-contained breathing apparatus can be used. Shut off all sources of ignition. Evacuate area. Warn affected surroundings. Environmental precautions : Do not empty into drains, ditches or rivers by using sand, earth, and other appropriate barriers. Maybe hazard to drinking water sources when very large quantities get into ground water. Inform the responsible authorities. Methods and material for containment : Use absorbent material to collect and contain for disposal. and cleaning up Pump off lager quantities into a suitable tank. Use non-sparking tools. Afterwards ventilate area and wash area with suitable detergent and rinse thoroughly. SECTION 7 HANDLING AND STORAGE Precautions for safe handling : Use closed apparatus if possible. If release of the substance cannot be prevented, then it should be suctioned off at the point of exit. Take precautionary measures against static discharge. Earth all parts which can be electrically charged. Avoid contact with eyes, skin and clothing. JEESPERSE HD Page 2 of 5

3 Wear suitable protective clothing and chemical resistant rubber gloves. Wear chemical safety goggles. See section 8. Hygiene measures work : Do not eat, drink or smoke when working. Wash hands thoroughly after handling and before breaks. Apply fatty skin-care products after washing. Conditions for safe storage, including : Keep container tightly closed. Store container in a cool and well-ventilated place. any incompatibilities Store away from heat, sparks and open flame. No direct sunlight. Protect from overheating/heating up. Containers have to be labeled clearly and permanently. Only substances of the same storage class should be stored together. Do not store together with oxidizing substances, spontaneously flammable substances, organic peroxides and self-reactive substances and gases etc. Specific end use(s) : Cosmetic products. SECTION 8 EXPOSURE CONTROLS / PERSONAL PROTECTION Control parameters EU Exposure Limit value : - Exposure controls Respiratory protection : Use closed apparatus if possible. If release of the substance cannot be prevented, then it should be suctioned off at the point of exit. Eye protection : Wear chemically safety goggles with side protection. Skin protection : Wear suitable solvent resistant protective clothing, wear a tight long apron and chemical resistant gloves: Polychloroprene 0.5 mm, max 4 hours Nitrile rubber/nitrile latex (0.35 mm), 8 hours Fluoro carbon rubber (0.4mm), 8 hours Textile or leather gloves are completely unsuitable. SECTION 9 PHYSICAL AND CHEMICAL PROPERTIES Form : Transparent gel Odor : Slight characteristic odor Color : Colorless Specific 25 C : 0.76 Boiling point/range : 180 C (Isododecane) Vapor 50 C : 30 mbar (Isododecane) Flash point : 43 C Ignition temperature : 430 C (Isododecane) JEESPERSE HD Page 3 of 5

4 Lower explosion limit : 0.5 vol%, 40 mg/m3 (Isododecane) Upper explosion limit : 3.8 vol%, 270 g/m3 (Isododecane) Water solubility (20 C in g/l) : None ph : n.a. Other information : This information is not intended for use as product specifications. SECTION 10 STABILITY AND REACTIVITY Chemical stability : Stable under normal use conditions. Possibility of hazardous reactions : - Conditions to avoid : Keep away from heat (< 40 C). Incompatible materials : Strong oxidizing agents. Hazardous decomposition products : - SECTION 11 - TOXICOLOGICAL INFORMATION Information on toxicological effects : Harmful: may cause lung damage if swallowed SECTION 12 - ECOLOGICAL INFORMATION Toxicity : Not established. Persistence and degradability : Not established. SECTION 13 - DISPOSAL CONSIDERATIONS Waste treatment methods : In accordance with local law. SECTION 14 TRANSPORTATION INFORMATION ADR/RID IMDG Marine Pollutant : Not applicable JEESPERSE HD Page 4 of 5

5 ICAO/IATA Limits : 60 L Passenger Aircraft; 220 L Cargo Aircraft only SECTION 15 REGULATORY INFORMATION Safety, health and environmental regulations/legislation specific for the substance or mixture: Relevant information regarding : N/A Authorization Relevant information regarding : REACH Annex XVII, 3. (276/2010/EC) Restriction No relevance for cosmetic applications. National legislation / regulations Germany TA Luft : Chapter Organic Substances: Mass flow 0,50 kg/hr or mass concentration 50 mg/m³ Germany TRGS : Use instruction manuals TRGS 201/400/500/510/555 Chemical Safety Assessment : There is no chemical safety assessment available for this mixture. SECTION 16 OTHER INFORMATION Method of classification : The mixture was classified according to 67/548/EEC and 1999/45 EEC. Sources of data : Own data; GESTIS Substance Data Base List of relevant full hazard statements : H226 Flammable liquid and vapor. H304 May be fatal if swallowed and enters airways. Disclaimer: These data are offered in good faith as typical values and not as a Product Specification. No warranty, either expressed or implied, is hereby made. The recommended industrial hygiene and safe handling procedures are believed to be generally applicable. However, each user should review these recommendations in the specific context of intended use and determine whether they are appropriate. JEESPERSE HD Page 5 of 5