: S2021G HS GREY PRIMER (S2021G)

Transcription

1 Date of issue: 2/27/2015 Revision date: 11/30/2017 Supersedes: 4/4/2017 Version: 3.2 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form : Mixture Product name : S2021G HS GREY PRIMER (S2021G) Product group : 2K Primer 1.2. Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses Function or use category : Primer Uses advised against 1.3. Details of the supplier of the safety data sheet Supplier U-POL LIMITED Denington Road, Wellingborough Northants. NN8 2QH - UK T +44 (0) F +44 (0) technical.department@u-pol.com - Distributor GYSO AG Steinackerstrasse 34 CH-8302 Kloten - Switzerland T Emergency telephone number Emergency number : CHEMTREC (0) (24 hrs) SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification according to Regulation (EC) No. 1272/2008 [CLP] Flammable liquids, Category 2 H225 Hazardous to the aquatic environment Chronic Hazard, Category 2 H411 Full text of H statements : see section 16 Adverse physicochemical, human health and environmental effects Highly flammable liquid and vapour. Toxic to aquatic life with long lasting effects Label elements Labelling according to Regulation (EC) No. 1272/2008 [CLP] Extra labelling to displayextra classification(s) to display Hazard pictograms (CLP) : Signal word (CLP) Hazard statements (CLP) Precautionary statements (CLP) EUH-statements : Danger GHS02 GHS09 : H225 - Highly flammable liquid and vapour. H411 - Toxic to aquatic life with long lasting effects. : P210 - Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. P261 - Avoid breathing vapours, fume, spray. P264 - Wash hands thoroughly after handling. P273 - Avoid release to the environment. P280 - Wear face protection, protective clothing, protective gloves. P501 - Dispose of contents and container to hazardous or special waste collection point, in accordance with local, regional, national and/or international regulation. : EUH066 - Repeated exposure may cause skin dryness or cracking. 11/30/2017 EN (English) SDS Ref.: S2021G 1/7

2 2.3. Other hazards SECTION 3: Composition/information on ingredients 3.1. Substances 3.2. Mixtures Name Product identifier % Classification according to Regulation (EC) No. 1272/2008 [CLP] 4-methylpentan-2-one, isobutyl methyl ketone (CAS-No.) (EC-No.) (EC Index-No.) (REACH-no) xylene (Note C) (CAS-No.) (EC-No.) (EC Index-No.) (REACH-no) trizinc bis(orthophosphate) (CAS-No.) (EC-No.) (EC Index-No.) ethylbenzene (CAS-No.) (EC-No.) (EC Index-No.) (REACH-no) Full text of H-statements: see section Flam. Liq. 2, H225 Acute Tox. 4 (Inhalation), H332 Eye Irrit. 2, H319 STOT SE 3, H335 < 5 Flam. Liq. 3, H226 Acute Tox. 4 (Inhalation), H332 Acute Tox. 4 (Dermal), H312 Skin Irrit. 2, H315 < 100 Aquatic Acute 1, H400 Aquatic Chronic 1, H410 < 5 Flam. Liq. 2, H225 Acute Tox. 4 (Inhalation:dust,mist), H332 STOT RE 2, H373 Asp. Tox. 1, H304 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Remove person to fresh air and keep comfortable for breathing. : Rinse skin with water/shower. Take off immediately all contaminated clothing. : Rinse eyes with water as a precaution. : Call a poison center or a doctor if you feel unwell Most important symptoms and effects, both acute and delayed Symptoms/effects after skin contact : Repeated exposure may cause skin dryness or cracking Indication of any immediate medical attention and special treatment needed Treat symptomatically. SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media 5.2. Special hazards arising from the substance or mixture Fire hazard Hazardous decomposition products in case of fire : Water spray. Dry powder. Foam. Carbon dioxide. : Highly flammable liquid and vapour. : Toxic fumes may be released Advice for firefighters Protection during firefighting : Do not attempt to take action without suitable protective equipment. Self-contained breathing apparatus. Complete protective clothing. SECTION 6: Accidental release measures 6.1. Personal precautions, protective equipment and emergency procedures For non-emergency personnel Protective equipment Emergency procedures For emergency responders Protective equipment : Safety glasses. Protective clothing. Gloves. : Ventilate spillage area. No open flames, no sparks, and no smoking. : Do not attempt to take action without suitable protective equipment. For further information refer to section 8: "Exposure controls/personal protection". 11/30/2017 EN (English) SDS Ref.: S2021G 2/7

3 6.2. Environmental precautions Avoid release to the environment Methods and material for containment and cleaning up For containment Methods for cleaning up Other information 6.4. Reference to other sections For further information refer to section 13. : Contain leaking substance. Collect spillage. : Take up liquid spill into absorbent material. Notify authorities if product enters sewers or public waters. : Dispose of materials or solid residues at an authorized site. SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling Hygiene measures : Ensure good ventilation of the work station. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Ground/bond container and receiving equipment. Use only non-sparking tools. Take precautionary measures against static discharge. Flammable vapours may accumulate in the container. Use explosion-proof equipment. Wear personal protective equipment. : Do not eat, drink or smoke when using this product. Always wash hands after handling the product Conditions for safe storage, including any incompatibilities Technical measures Storage conditions Storage temperature : < 25 C Storage area Special rules on packaging 7.3. Specific end use(s) : Ground/bond container and receiving equipment. : Store in a well-ventilated place. Keep cool. Keep container tightly closed. : Store in a well-ventilated place. : Keep only in original container. SECTION 8: Exposure controls/personal protection 8.1. Control parameters ethylbenzene ( ) EU Local name Ethylbenzene EU IOELV TWA (mg/m³) 442 mg/m³ EU IOELV TWA (ppm) 100 ppm EU IOELV STEL (mg/m³) 884 mg/m³ EU IOELV STEL (ppm) 200 ppm EU Notes Skin United Kingdom Local name Ethylbenzene United Kingdom WEL TWA (mg/m³) 441 mg/m³ United Kingdom WEL TWA (ppm) 100 ppm United Kingdom WEL STEL (mg/m³) 552 mg/m³ United Kingdom WEL STEL (ppm) 125 ppm United Kingdom Remark (WEL) Sk (Can be absorbed through the skin. The assigned substances are those for which there are concerns that dermal absorption will lead to systemic toxicity) xylene ( ) EU Local name Xylene, mixed isomers, pure EU IOELV TWA (mg/m³) 221 mg/m³ EU IOELV TWA (ppm) 50 ppm EU IOELV STEL (mg/m³) 442 mg/m³ EU IOELV STEL (ppm) 100 ppm EU Notes Skin United Kingdom Local name Xylene, o-,m-,p- or mixed isomers United Kingdom WEL TWA (mg/m³) 220 mg/m³ United Kingdom WEL TWA (ppm) 50 ppm United Kingdom WEL STEL (mg/m³) 441 mg/m³ United Kingdom WEL STEL (ppm) 100 ppm 11/30/2017 EN (English) SDS Ref.: S2021G 3/7

4 xylene ( ) United Kingdom Remark (WEL) Sk (Can be absorbed through the skin. The assigned substances are those for which there are concerns that dermal absorption will lead to systemic toxicity), BMGV (Biological monitoring guidance values are listed in Table 2) 4-methylpentan-2-one, isobutyl methyl ketone ( ) EU Local name 4-Methylpentan-2-one EU IOELV TWA (mg/m³) 83 mg/m³ EU IOELV TWA (ppm) 20 ppm EU IOELV STEL (mg/m³) 208 mg/m³ EU IOELV STEL (ppm) 50 ppm United Kingdom Local name 4-Methylpentan-2-one United Kingdom WEL TWA (mg/m³) 208 mg/m³ United Kingdom WEL TWA (ppm) 50 ppm United Kingdom WEL STEL (mg/m³) 416 mg/m³ United Kingdom WEL STEL (ppm) 100 ppm United Kingdom Remark (WEL) Sk (Can be absorbed through the skin. The assigned substances are those for which there are concerns that dermal absorption will lead to systemic toxicity), BMGV (Biological monitoring guidance values are listed in Table 2) 8.2. Exposure controls Appropriate engineering controls Personal protective equipment : Ensure good ventilation of the work station. : Gloves. Gas mask. Protective clothing. Safety glasses. Materials for protective clothing: Impermeable clothing Hand protection: Protective gloves Eye protection: Safety glasses Skin and body protection: Wear suitable protective clothing Respiratory protection: Air-fed respiratory protective equipment should be worn when this product is sprayed Environmental exposure controls : Avoid release to the environment. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Appearance : Viscous. Liquid. Colour Odour Odour threshold ph Relative evaporation rate (butylacetate=1) Melting point : Freezing point Boiling point : > 35 C Flash point : 22 C 11/30/2017 EN (English) SDS Ref.: S2021G 4/7

5 Auto-ignition temperature Decomposition temperature Flammability (solid, gas) Vapour pressure Relative vapour density at 20 C Relative density : Density : Solubility Log Pow Viscosity, kinematic Viscosity, dynamic Explosive properties Oxidising properties Explosive limits : insoluble in water. soluble in most organic solvents Other information VOC content - Actual VOC content VOC content - Regulatory SECTION 10: Stability and reactivity Reactivity Highly flammable liquid and vapour Chemical stability Stable under normal conditions Possibility of hazardous reactions No dangerous reactions known under normal conditions of use Conditions to avoid Avoid contact with hot surfaces. Heat. No flames, no sparks. Eliminate all sources of ignition Incompatible materials Hazardous decomposition products Under normal conditions of storage and use, hazardous decomposition products should not be produced. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity Skin corrosion/irritation Serious eye damage/irritation Respiratory or skin sensitisation Germ cell mutagenicity Carcinogenicity Reproductive toxicity STOT-single exposure STOT-repeated exposure Aspiration hazard SECTION 12: Ecological information Toxicity Ecology - general : Toxic to aquatic life with long lasting effects Persistence and degradability trizinc bis(orthophosphate) ( ) Persistence and degradability Not established. 11/30/2017 EN (English) SDS Ref.: S2021G 5/7

6 12.3. Bioaccumulative potential trizinc bis(orthophosphate) ( ) Bioaccumulative potential Mobility in soil Not established Results of PBT and vpvb assessment Other adverse effects SECTION 13: Disposal considerations Waste treatment methods Regional legislation (waste) Waste treatment methods Additional information SECTION 14: Transport information In accordance with ADR / RID / IMDG / IATA / ADN : Disposal must be done according to official regulations. : Dispose of contents/container in accordance with licensed collector s sorting instructions. : Flammable vapours may accumulate in the container. ADR IMDG IATA ADN RID UN number UN proper shipping name Transport hazard class(es) Packing group Environmental hazards No supplementary information available Special precautions for user - Overland transport - Transport by sea - Air transport - Inland waterway transport - Rail transport Transport in bulk according to Annex II of Marpol and the IBC Code SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture EU-Regulations Contains no REACH substances with Annex XVII restrictions Contains no substance on the REACH candidate list Contains no REACH Annex XIV substances 11/30/2017 EN (English) SDS Ref.: S2021G 6/7

7 VOC content National regulations Chemical safety assessment No chemical safety assessment has been carried out SECTION 16: Other information Full text of H- and EUH-statements: Acute Tox. 4 (Dermal) Acute toxicity (dermal), Category 4 Acute Tox. 4 (Inhalation) Acute toxicity (inhal.), Category 4 Acute Tox. 4 (Inhalation:dust,mist) Acute toxicity (inhalation:dust,mist) Category 4 Aquatic Acute 1 Hazardous to the aquatic environment Acute Hazard, Category 1 Aquatic Chronic 1 Hazardous to the aquatic environment Chronic Hazard, Category 1 Aquatic Chronic 2 Hazardous to the aquatic environment Chronic Hazard, Category 2 Asp. Tox. 1 Aspiration hazard, Category 1 Eye Irrit. 2 Serious eye damage/eye irritation, Category 2 Flam. Liq. 2 Flammable liquids, Category 2 Flam. Liq. 3 Flammable liquids, Category 3 Skin Irrit. 2 Skin corrosion/irritation, Category 2 STOT RE 2 Specific target organ toxicity Repeated exposure, Category 2 STOT SE 3 H225 H226 H304 H312 H315 H319 H332 H335 H373 H400 H410 H411 EUH066 Specific target organ toxicity Single exposure, Category 3, Respiratory tract irritation Highly flammable liquid and vapour. Flammable liquid and vapour. May be fatal if swallowed and enters airways. Harmful in contact with skin. Causes skin irritation. Causes serious eye irritation. Harmful if inhaled. May cause respiratory irritation. May cause damage to organs through prolonged or repeated exposure. Very toxic to aquatic life. Very toxic to aquatic life with long lasting effects. Toxic to aquatic life with long lasting effects. Repeated exposure may cause skin dryness or cracking. Flam. Liq. 2 H225 On basis of test data Aquatic Chronic 2 H411 Calculation method UPOL SDS EU (no product code) For professional use only. The information contained within this (SDS) is believed to be correct as of the date issued however it is subject to change from time to time. It does not purport to be all inclusive or exhaustive and shall only be used as a guide. U-POL makes no warranties, expressed or implied, including but not limited to, any implied warranty of fitness for a given purpose or usage. It is the Buyers responsibility to ensure the suitability of the products for their own use and to check the information is up to date. U-POL cannot be held responsible for the suitability of use for any of its products, considering the wide range of factors such as application, substrates and handling methods. Since these conditions of use are outside of our control, the company shall not be held liable for any damage resulting from handling or from contact with the product detailed. Moreover, addition of reducers, hardeners or other additives over and above U-POL s recommendations for use, may substantially alter the composition and hazards of the product. U-POL data sheets are available via the U-POL website at 11/30/2017 EN (English) SDS Ref.: S2021G 7/7