2010 A&T Europe - All rights reserved. EXCLUSIVE TECHNOLOGY FOR POOL REFURBISHMENT

Transcription

1 EXCLUSIVE TECHNOLOGY FOR POOL REFURBISHMENT

2

3

4 RENOVACTION, NEW TECHNOLOGIES TO EXCEED CONCRETE RenovAction is the patented and exclusive technology by Myrtha Pools, specifically developed for swimming pool renovation, and the refurbishment of existing public, commercial, leisure and competitive pools. Myrtha offers more technical solutions and a degree of finish with no industry equals. The process is based on Myrtha technology, simply the most advanced technology in the swimming pool industry. RenovAction uses the same technology as Myrtha, which is a pre-engineered modular system based on the use of laminated stainless steel panels and buttress system.

5 THE REFURBISHMENTS RenovAction is the ideal solution to solve all the problems that often arise in concrete, gunite, or shotcrete pools in operation for a long period of time. In many cases, refurbishment of the structure is necessary. With RenovAction, we can meet or exceed all the different types of technologies and requirements offered around the world Renovation for planning requirements Many obsolete and older installations require a total renovation from the original design. With RenovAction the design can be broadened, or changed to meet today s design standards. There are many reasons why: 1- Many installations do not meet current health code regulations and therefore require necessary adjustments and corrections. Renovation for structural problems Traditional pools, including reinforced concrete, gunite and shotcrete, over time develop structural problems that require significant maintenance and interventions, resulting in substantial investment. Frequently, maintenance is required due to the ground settling over time, which often results in breaking of pipes, damage to tiles and the failure of the structure being water-tight! 2- In other cases, refurbishment can be achieved by the owners in order to meet new design criteria even if the change is radical in nature. Recently, many competitive pools have been upgraded, and leisure components have been added to included freeform sections, lazy rivers, water play equipment and areas with hydro-massage and special equipment. 3- Finally another reason that many owners are driven to upgrade their facilities, is the necessity to change the filtration equipment and technology from a skimmer system to an overflow gutter technology.

6 WHY RENOVACTION? Minimum interventions, zero demolitions Renovation quickness Fixed costs Long life, extensive guarantee The refurbishment with RenovAction does not require destructive interventions on the structure. This is a remarkable saving on the installation times and on the costs. The internal surface of the original pool stays unchanged, only the accessories on the wall or on the floor are replaced. The renovation of a reinforced concrete, tiled, shotcrete or gunite pool requires a long time for the preparation and the sedimentation of the adhesives, of the mortars, plaster and of the waterproofing materials. RenovAction system is rapid and essential in the installation stages, without pool preparation times or use of building equipments. This way it avoids the protracted closing of the pool. RenovAction reduces, at the maximum, the renovation and running costs of the pool. This does not even include all the further finish and maintenance cost required by traditional reinforced concrete, shotcrete and gunite pools. Also, because the installation time is very short, the risk of cost overruns is significantly reduced. Swimming pools refurbished using RenovAction technology have a virtually unlimited life, thanks to the structural integrity and proven characteristics of the materials used, and to the advanced technological features of a modular system. This is why RenovAction can confidently warrant its pools for many years

7 Realizations in difficult conditions Adaptability in every situation Low maintenance, easy to care for Seismic activities, unstable or expansive soil conditions, or wide temperature swings damage traditional concrete, shotcrete, or gunite pools. RenovAction, seismic and flexible, ensures maximum reliability in all of these cases: it is the ideal system for pools that have suffered structural damages, in earthquake zones like New Zealand, Japan and the United States. RenovAction allows the refurbishment of pools in very special environments. On high floors of buildings, or in reduced spaces: the construction of RenovAction does not require the use of cranes, as the materials are light and easily transportable. It is also possible to refurbish pools in small spaces with little change to their dimensions, thanks to the ability to adjust the distances behind the panels. Unlike traditional construction, RenovAction pools do not require a significant maintenance schedule. Sturdy, built to last, and not subject to dimensional variations. A RenovAction structure will not suffer cracks, or be susceptible to leaks, and is not affected by the aggressive action of chlorinated pool water.

8 THE MATERIALS RenovAction, the same way as Myrtha, uses superior materials that are specifically designed for swimming pool use: stainless steel, PVC, ceramic and mosaic tiles.

9 PVC STAINLESS STEEL The specification of the stainless steel used in a RenovAction pool guarantees extremely long life to the structure regardless of the presence of highly aggressive soils or high water-tables. RenovAction uses exclusive components bolted one to another, eliminating welding of the panels, which is subject to more corrosion. Stainless steel ensures maximum mechanical strength of the panels, buttresses and all the other elements that form the structure of the swimming pool. Perfect waterproofing is ensured by the unique process of bonding PVC to the Myrtha steel panels. A hard PVC membrane is hot laminated to the steel in the manufacturing process, whereas a reinforced membrane is used on the floor of the pool in order to follow the contours of the concrete subsurface. CERAMIC AND MOSAIC For high-level aesthetic finishes, RenovAction technology uses ceramic klinker and a series of special vitreous mosaics, that matched with the range of colours of the PVC allow to personalize every pool according to the environment. Unlike traditional concrete installations, in a RenovAction pool the ceramic klinker tiles are used exclusively to cover the upper part of the panels and the edge and quality of the adhesive materials used, largely limits the occurrence of problems such as the detaching of the tiles from the walls and from the floor.

10 THE PROCESS The RenovAction process may include the walls, the floor covering, and the overflow gutter separately or in combination, depending upon the scope of the project.

11 In 1997 Almaty, ex-capital of Kazakhstan, was chosen to host the Central Asia Games. At the time, however, the swimming facilities of the local sports centre, that date back to 1960, had been closed for a long time for the impossibility to make them work, despite of repeated interventions to fix them. The works of rehabilitation of the facilities were committed to Myrtha Pools that, in only 35 days, provided for the total renovation of the external 50m pool for competitions, the indoor 25 m and the outdoor diving pool. CLEANING STATION VACUUM CHAMBER for Polymerization primer spraying STEAM OVEN to eliminate solvent OVEN for quick temperature raising QUICK COOLING PROCESS Peeble protective film for the construction site CALANDERING OF Hard Bond PVC onto the hot steel Application of protective film Hard Bond PVC Stainless Steel plate The industrial lamination process The walls are modular panels of Myrtha stainless steel which is laminated on the inner swimming pool face with a hard PVC surface. The lamination process permanently bonds the PVC to the steel at high temperature, forming a unique product which may be mechanically processed and bent in excess of 180 to form the panels without any effect on the integrity of the PVC membrane. Lamination Punching Bending

12 THE INSTALLATION PROCESS RenovAction installation process is simple and fast, without the possibility of mistakes or slowdowns in the renovation works.

13 Installation of the wall panels Pict. 1 The existing surface of the pool is normally left untouched. Clamps, also manufactured with the same Myrtha stainless steel as the panels, are fixed to the pool wall. Clamps may be recessed into the wall, should it be critical to maintain the dimension of the existing pool. The recessed clamps are often required when the pool has to meet the rules for competitions (Pict. 1) Then the wall panels are inserted (Pict. 2). The installation of a pool with RenovAction method always starts from the corners. To cover the corners of the walls a special corner piece is used. Pict. 2

14 Installation of the overflow gutter Myrtha has developed a patented system to install an overflow gutter. It may be installed working on the existing deck; no need of working from underneath to install it. The gutter is manufactured with the same Myrtha stainless steel as the panels and therefore, once the special Myrtha sealant is applied, it forms a continuous waterproofed surface. This is the unsurpassed advantage of the Myrtha RenovAction system in comparison with any other method of resurfacing a swimming pool. There are many choices in the options of overflow gutters, with aesthetics that may satisfy even the most demanding and discriminating customer. The floor is covered with reinforced PVC membrane The floor is lined with a special reinforced PVC membrane type Alkor 2000, which can be laid on a concrete floor. It has been used for over 30 years as a swimming pool waterproofing material: smooth but not slippery, resistant to icing and temperature up to 40 C or 104F. It is welded on site by means of hot air and it may follow an extensive range of shapes and profiles (stairs, recessed corners, etc.). The joints between walls and floor have a double safety feature: the floor membrane is welded first to the Myrtha wall panel and a PVC corner profile is then superimposed and is welded both to the wall and the floor. A Myrtha floor can be easily marked with racing lanes or safety markings using black PVC membrane or special purpose mosaic tiles. The special Soft Walk matting has been developed by Myrtha to attain a smooth support surface for the membrane, while at the same time allowing sub surface drainage.

15 Waterproofing of the structure Once the installation of the wall panels has been completed on all the pool, we initiate waterproofing of the structure with a combination of PVC semi-rigid sections and a special Myrtha sealing that are applied on the joints of the wall panels, guaranteeing a perfect weld on the entire surface. The same colour liquid PVC is spread like silicone into the joint and it dries in a few minutes forming a hard surface and same consistency of the lamination on the panel. The ceramic tiles on the overflow gutter After the pool has been completely sealed and the overflow gutter installed, the ceramic tiles are applied onto the Myrtha surface. Gluing tile on a Myrtha stainless steel surface is much easier and safer that on concrete. As there is no possibility of water seepage from behind the tile, the traditional problem of poor long term adhesion is therefore eliminated. The spaces between the tiles are sealed with special epoxy materials that guarantee a perfectly smooth and very long lasting finish.

16 INDIVIDUAL SOLUTIONS Fitting spacers In some cases, the original walls of traditional pools to be renovated may show cracks or unevenness, which could compromise the precision of the installation of the panels. RenovAction addresses the problem thanks to the use of special high density foam spacers, that are glued between the concrete wall and the panel. Once fixed, the spacers are trimmed off with accuracy thanks to the use of a high temperature electric cable. The number of the spacers may vary according to the panels and the unevenness of the walls.

17 Case A As per the project requirements, the new gutter section can be positioned by partial removal of the existing concrete gutter creating a recess for the placement and fixing of the Myrtha gutter. This solution does not cater for changes in the levels of the surrounding floor/pool deck (Pict. 01). Pict. 01 The overflow gutter Pict. 01 Installation in the cut overflow gutter. Pict. 02 Installation in the existing overflow gutter. Case B Alternatively, the gutter can be positioned directly onto pool deck, without any demolition/removal of the pre-existing concrete structure (Pict. 02). However in this case, it becomes necessary to adjust the pool deck level at the back of the gutter, by placing a hob or step section in place behind the new Myrtha Renovaction gutter. The resultant increase in pool depth, allows for a comprehensive renovation of the water circulation system, as there is enough space to install pipes and fittings necessary for return floor inlets, thus avoiding having to excavate to access the old pipes. Pict. 02

18 Portholes and windowed walls In the case of competition facilities originally equipped with portholes or windowed walls, RenovAction technology gives the possibility to maintain the same accessories also in the new project. In these cases the RenovAction panels are positioned in the original openings in the wall. Portholes and windows for the underwater shootings are installed on the panels with a special flange system. The recirculation systems The new pipes are dipped in a 20 cm bed of gravel, covered in its turn by a light layer of concrete, smoothed and lined with the floor PVC, to guarantee its water tightness. This operation allows remarkable improvement in distribution of water in the pool passing from obsolete recirculation systems to the distribution from the floor with a sufficient number of inlet fittings. Alternatively, according to the environment of the installation, advanced side recirculation systems can be used, that allow a distribution equivalent to the floor recirculation. One of these systems is for example the original Strahlenturbulenz German patent. It is a system of wall inlets, arranged alternately on the long sides of the pool. The inlets produce two powerful stream flows that allow a quick and total recirculation of the water in the pool, without leaving dead zones.

19 Staircases and recessed steps RenovAction guarantees the maximum adaptability to planning requirements in the case of recessed staircases and built-in steps, which are more in demand in most large facilities, both for competition and for communities. In the case of RenovAction recessed ladders, they are structured inside a panel that is installed exactly like the other panels: it will be enough to create in the existing wall of the pool, in correspondence with the ladder, a minimum lodgement for the projection of the steps towards the internal wall. Like in the case of the safety recessed ledge, RenovAction panels can be directly supplied with the recessed step, installed inside the existing pool. It can be installed on one side as well as the entire perimeter of the pool. SoftWalk mattress The special Softwalk surface consists of a soft closed-cell foam mattress which is positioned on the bottom of the pool, underneath the PVC covering, and makes movement in the water more comfortable and safe. It does not deform in any way and maintains its elasticity over the years. Combined with the non-slip bottom covering, it is the ideal solution for obtaining greater safety in the pool. When fitted on the entrance steps, under whirlpool jets or in shallow water areas, it is also an excellent supporting surface for relaxing in outstretched position. SoftWalk is ideal for pools that have multi-purpose use with shallow water activity and for shallow water pools with toys and/or with beach entry.

20 VARIATIONS AND FINISHES RenovAction technology was developed to provide a long lasting, low maintenance pool that is easy to install, highly functional, but still maintaining the possibility of a wide range of quality finishes. Only the best materials are used for this purpose (mosaics, klinker, stone finishes, etc). Myrtha has an exceptionally wide range of standard finishes, from the traditional skimmers structure, to the most modern overflow system. It is also possible to combine the various options within the same project, or design to suit.

21 CERAMIC OVERFLOW The overflow gutter is the ideal solution to ensure a constant water circulation. The finish of the gutter in RenovAction technology can be realized with special ceramic tiles, that ensure a perfect overflow level and an elegant design of the pool. Alternatively, materials for personalized finishes such as mosaics, glass or natural stones can be used. SKIMMER CERAMIC RenovAction technology provides for ceramic or glass finishes also in the situations when it is necessary to use a vertical wall higher than the water level. These type of finishes, besides enhancing the upper part of the pool, simplify at maximum its cleaning. CERAMIC HEADWALL The headwall, 30 cm higher than the water level, is provided for by F.I.N.A. regulations for competition pools that do not incorporate an overflow gutter on all four sides. Also in this case, it is possible to choose a special ceramic finish.

22 SYSTEMS, SOLUTIONS, ACCESSORIES A precise installation is imperative in the construction of competition pools. That s why RenovAction technology has been chosen by Swimming Federations throughout the world for some of their most important competitions; as an example, the 2008 Beijing Olympic Games. For competition swimming pools, the Renovaction system and accessories have been developed to meet even F.I.N.A. regulations for international competitions, without compromising safety and quality.

23 Bulkhead Movable floor Air safety cushion Removable headwalls The bulkhead allows for various activities to take place in the pool at the same time. The structure consists of stainless steel or composites, square section beams, covered with special anti-slip ABS flow through grating which allows for 15% gap or flow through which assist in moving the bulkhead by offering less resistance. Moving the bulkhead is achieved through two stainless steel flywheels (patented by Myrtha Pools) positioned at each end of the bulkhead and a patented doublechained reduction gear can be used to further assist movement or a patented motorized system. The movable floor allows the use of one swimming pool for several activities: competitions, baby swim, aqua dance, disabled/remedial activity, swimming instruction, diving, activities that require different levels of water depth. The system includes a high pressure compressor, with a large capacity air tank which regulates the released air through a series of spargers in the floor of the pool. It produces an air cushion that allows the diver to practice the most difficult of dives without risk of serious injury when entering the water. Regulations require competition pools to have headwalls 30 cm higher than the water level, at the start and turning ends of the pool. For this purpose, Myrtha Pools have developed a removable headwall, with a composites structure, covered by an anti-slip ABS grating. The big advantage of this system is that it allows the pool to be built with an overflow gutter on all four sides while providing an ideal support for the electronic timing touch pads, starting blocks and lane line anchors.

24 THE COMPETITION 10 LANE POOL The pool measures 51x25x2 m. Initially 50 m long, it was lengthened to include a movable bulkhead. To accommodate the movable bulkhead one end of the pool had to demolished and replaced with Myrtha panels. The pool has three overflow sides and an end with a ceramic competition headwall. It is equipped with a movable bulkhead, 8 sets of recessed steps, starting blocks, mosaic lane markings, plastic mosaic targets and Ceramic 2 style Myrtha gutters. PHASE 1 1 CASE HISTORIES CHALLENGE STADIUM PERTH THE PROJECT Challenge Stadium Aquatic Centre has played host to numerous outstanding international sporting events including the 6th and 8th FINA World Championships in 1991 and in Never before in the history of the event has a city hosted this prestigious event twice. Challenge Stadium has world class swimming facilities: one 50 m 8 lane indoor swimming pool, an indoor diving/water polo pool, two 50 m outdoor swimming pools and an outdoor water THE WARM-UP 8 LANE POOL It measures 50x21 m, with depth variable from 2 to 3 m. It incorporates a ceramic 2 style overflow gutter on the long sides, and ceramic competition headwalls on the pool ends. It is equipped with protruding steps, 4 sets of recessed steps, starting blocks, ceramic mosaic lane markings on the floor and plastic mosaic targets on the pool end walls. PHASE 1 PHASE 2

25 PHASE 2 PHASE 3 PHASE 4 PHASE 5 polo pool, built by Myrtha Pools in 1996 for the Water Polo competitions of the 8th FINA World Championships held in In 2007 the management of the centre has chosen to incorporate RenovAction for the renovation of two 50 m outdoor pools in preparation of the 2008 FINA Swimming Master World Championships. From a comparative study (available on application) carried out on the pools of the Challenge, it has emerged, in fact, that the maintenance of a concrete pool is more complex and onerous with regard to the one of a Myrtha pool. The Myrtha pool built in 1996 has not undergone any maintenance until 2003, and at this time it was only low value minor maintenance. Yet the indoor concrete tiled 50m pools, after only 9 years of operation, have required the total replacement of the ceramic tiles along with major water proofing repairs. THE CONSTRUCTION The renovation works of the pools were started in September 2007 and each pool took only few weeks start to finish, with the 8 lane 50m finished late October and the 10 lane 50m finished in late December. PHASE 3 PHASE 4 PHASE 5 PHASE 6

26 2 CASE HISTORIES BEIJING 2008, OLYMPIC GAMES THE PROJECT Ying Tung Natatorium at the Beijing Olympic was a major subject of focus for the Olympic competition venue renovation projects. The natatorium showed signs of aging due to its continuous use since being built nearly 20 years ago. The natatorium was the main venue for swimming in the 1990 Asian Games. After years, cracks in the pools and leakage had become a severe problem that meant the facilities were far short of competition standards. However, completely replacing the pools would have been costly and time consuming. The option of removing the pools and adding reinforcements would not have guaranteed a permanent result anyway. The preference of the Olympic Committee and of the people in charge of the project thereby selected to use RenovAction. The renovation of the pool with RenovAction involved minimal interventions on the old structure, with a marked saving in time and resources. PHASE 1 PHASE 2

27 PHASE 3 PHASE 4 PHASE 5 THE CONSTRUCTION Only a few months after the beginning of the works, the pool was officially inaugurated on September 2007 for the first important international competition: the 2007 World Cup of Modern Pentathlon and it was ready to host the water polo and modern pentathlon competitions for 2008 Olympic Games. The swimming pool is a 50x25x3 m with ceramic overflow gutter on all sides, removable headwalls, 6 underwater windows, 4 recessed treads and mosaic marking lines. PHASE 6 PHASE 7

28 PHASE 1 PHASE 2 3 CASE HISTORIES BIRRONG SWIM CENTER The Birrong Swimming Center 50 m outdoor pool before the refurbishment with RenovAction. The components necessary for the renovation are packed, marked and positioned inside the pool, for easy handling and distribution to the installation positions. THE PROJECT Birrong Swim Centre is a popular swimming Centre in Sydney, Australia. In the centre there are two pools, a 50 m outdoor pool, completely renovated in 2007 using RenovAction technology. The 50 m outdoor reinforced concrete tiled pool had been unusable for a long period of time. The general pool condition included leaking pipes and failed water stop-joints, uneven flow into the overflow channel and damaged lighting systems. A major renovation was required. Myrtha Pools Renovaction technology was selected for the complete refurbishment of the old failed concrete pool. A combination of Myrtha Technology and RenovAction was used. The width of the pool was reduced which allowed for a disabled creating a blind area along the side walls. Furthermore, this solution allowed for easy installation of the side wall Strahlenturbulenz inlets circulation system and lighting systems.

29 PHASE 3 PHASE 4 PHASE 5 The installation of the Myrtha components starts from the side with the ramp for the disabled. This side is totally built with Myrtha Technology and it is adjusted according to the width of the ramp. After the installation of the base frame, the panels are fixed to the existing wall. After having completed the installation of the panels, the overflow channel is positioned and fixed in place. Then the Renovaction panels are installed directly onto the walls of the other three sides of the pool. Between the Renovaction panels and the concrete pool wall, vertical strips made of an insulating material are installed to allow for any imperfections in the concrete wall. PHASE 6 PHASE 7 Floor membrane lining and installation of mosaic lane markings. THE CONSTRUCTION The swimming pool is a 50x21x3 m with ceramic overflow gutter on long sides and ceramic competition headwalls on short sides, 5 recessed step treads, disabled ramp and mosaic marking lines on the floor.

30 4 CASE HISTORIES CENTRE NAUTIQUE LE KREMLIN-BICETRE THE PROJECT Built in the middle of the Sixties, the municipal pool of Le Kremlin-Bicêtre, important town situated a few kilometres from Paris, was closed in 1999 for safety reasons. After more than 30 years of activity, the facilities of the centre and the pool were exceedingly exploited and obsolete, to the extent that their use could present a problem for the users. The introduction of new standards and new hygiene and safety regulations made the renewal of the centre and of its sports facilities necessary. In particular, the pool did not answer the needs of the users, both the ones residing at Kremlin-Bicêtre, and the ones of the nearby cities of Arcueil and Gentilly, users of the facility too. After years of projects, studies and searches for financial support, the refurbishment of the centre was finally started in The renovation of the pool began a few months before the centre reopened, in November THE CONSTRUCTION The pool, renovated with RenovAction technology, is a 50x20 m one, with variable depth, from 0.80 m up to 4.20 m in the area designed for diving. The pool is furthermore equipped with new system of movable bulkhead, anchored at the wall, the so-called aileron mobile (movable aileron), that divides it into modules designed for the various activities. The project now accomodates the needs of the various swimming and sports clubs. It offers interesting and diversified activities and services, and it hosts various swimming competitions, thanks to its reception capacity of more than 600 spectators.

31 PHASE 1 PHASE 2 PHASE 3 PHASE 4 PHASE 5 PHASE 6

32 02/10 via Solferino, Castiglione d/s - MN - Italy T F info@myrthapools.com