Product Information Brochure

Transcription

1 Proud Member Since 1984 Product Information Brochure Rigging, Contractors & Industrial Supplies

2 2 Be humble, be proud and take care of your team and they will take care of our customers. Everything else will take care of itself. Contents Wire Rope...2 Synthetic vs. Wire Rope Slings....4 Synthetic Slings....6 Wire Rope Slings...10 Chain Slings...12 Hoists...13 Trolleys...14 Clamps...15 Rigging Hardware Fall Protection Wire Rope Standard 6 x 19 and 6 x 36 Classification Rope The 6 x 19 classification of wire ropes includes standard 6 strand, round strand ropes with 16 through 26 wires per strand. The 6 x 36 classification of wire ropes includes standard 6 strand, round strand ropes with 27 through 49 wires per strand. All rope of the same size, grade and core have the same nominal strength and weight per foot. Different constructions within each classification differ in working characteristics. These characteristics must be considered whenever you are selecting a rope for a specific application. Available in bright or galvanized finish Classification* Wires per Strand 6 x 7 7 through 15 6 x through 26 6 x through 49 6 x through 74 * Classifications are the same in 7 and 8 strand wire ropes. Dia. (in.) Approx. Weight per ft. IWRC (EIPS) Breaking Strength (tons)* Dia. (in.) Approx. Weight per ft. Breaking Strength (tons)* 1/ / / / / / / / / / / / / / / / / / Actual Rope Construction: 1/4 1-1/8: 6x19 1-1/4 2-1/2: 6x36 *Listed for comparison only. Actual operating loads vary. Popular Constructions 6 x 19 S 6 x 26 WS 6 x 25 FW 6 x 31 WS 6 x 36 WS 6 x 41 WS High Performance Wire Rope Quick Reference Super 8-8-strand overhead crane wire rope has a plastic coated core to increase operating life, and provide for permanent core lubrication. This is a strand compacted rope for increased fatigue life and is swage compacted for increased strength. Multi - developed for maximum performance on overhead cranes. This rope features a plastic coated core for extended fatigue life performance and permanent core lubrication. Multi is spin resistant to reduce block twisting on overhead cranes. Power 9 - all steel high strength type for overhead cranes. This rope is compacted to enhance abrasion characteristic and to reduce sheave- and drum wear. Up to 40% strength increase over standard 6-strand constructions. Ultra - ultra high strength type mainly used as high fatigue resistant rope for engineered cable assemblies. Up to 55% stronger than standard 6-strand constructions. Sensitive to introduced rotation - call before you select this rope for overhead crane applications. Construct-6 - high strength 6-strand rope for applications which require a crush resistant rope to be used on multiple layer winding systems. Because constructional stretch is near zero it can be used where a prestretched rope would be required. Compac 18 - more flexible than 19x7 due to a larger number of individual wires. Compacted to provide for better drum spooling and less core abrasion. Recommended for Grove, Terex, Century, Link-Belt, and National cranes. NOT to be used with a swivel. Compac 35 - recommended to be used on tower and European type mobile cranes. Available in left and right hand lay as well as in regular and lang s lay constructions. Recommended to be used in single line applications. ALLOWED to be used with a swivel. Hoist - fatigue resistant non-rotating rope. Strand compaction increases strength and sheave contact area. Plastic coated core increases fatigue life, prevents premature inner wire breaks and provides for permanent core lubrication. ALLOWED to be used with a swivel.

3 Galvanized Aircraft Cable Not for Aircraft Use Stainless Steel Aircraft Cable Not for Aircraft Use 7 x 7 Flexible Diameter (in.) Approx. Wt. per 1,000 ft. Breaking Strength * 1/ / /8 28 1,700 5/ ,600 3/ ,700 1/ ,100 *Listed for comparison only. Actual operating loads vary. 7 x 19 Extra Flexible Diameter (in.) Approx. Wt. per 1,000 ft. Breaking Strength * 3/ ,000 1/8 29 2,000 5/ ,800 3/ ,200 7/ ,600 1/ ,000 5/ ,800 3/ ,000 *Listed for comparison only. Actual operating loads vary. Vinyl Aircraft Cable Not for Aircraft Use Available in clear and colored PVC and nylon coating. 7 x 7 Stainless Steel Aircraft Cable (Type 304) Diameter (in.) Approx. Wt. per 1,000 ft. Breaking Strength 1/ / /8 28 1,760 7 x 19 Stainless Steel Aircraft Cable (Type 304) Also Available in Type 316 Diameter (in.) Approx. Wt. per 1,000 ft. Breaking Strength 3/ /8 29 1,760 5/ ,400 3/ ,700 1/ ,400 5/ ,000 3/ ,000 Stainless Steel Wire Rope (Type 304) Also Available in Type 316 Diameter (in.) Approx. Wt. per ft. Breaking Strength 7/ ,300 1/ ,800 9/ ,500 5/ ,000 3/ ,600 Construction 7 x 7 7 x 19 Diameter (in.) Coated to Inches Approx. Wt. per 1,000 ft. Breaking Strength * 1/16 1/ /32 1/ /32 3/ /8 3/ ,700 1/8 3/ ,000 3/16 1/ ,200 1/4 5/ ,000 5/16 13/ ,800 *Listed for comparison only. Actual operating loads vary. Clear Vinyl Coated Stainless Aircraft Cable Not for Aircraft Use Available in PVC and nylon coating. Also available in 7 x 7 construction Construction Diameter (in.) Coated to Inches Approx. Wt. per 1,000 ft. Breaking Strength * 1/8 3/ ,760 3/16 1/ ,700 1/4 5/ ,400 7 x 19 5/16 13/ ,000 3/8 7/ ,000 *Listed for comparison only. Actual operating loads vary. certifiedslings.com 3

4 Synthetic vs. Wire Rope Slings Guess which sling requires less effort to rig, has less chance of causing injury, is easiest to transport and store, and costs less to use? 755 Ton Concrete Platform Steam Generator We are one of the largest manufacturers of Slingmax slings in the southeast United States! Synthetic Sling - 44 lbs. Twin-Path Extra Slings with Covermax and K-Spec Core Yarn (TPXC) - This is our best synthetic sling. They have been made in capacities up to 600 metric tons (vertical hitch). All Twin-Path slings can be made with the Check-Fast inspection system. The safety and inspection features found only in Twin- Path products were created to overcome shortfalls riggers found in single path round slings. Check-Fast Inspection System - The Check-Fast System is designed to improve job-site safety. The Check-Fast Tag and External Warning Indicator (EWI) on a round sling product provides for a pass/fail inspection of the internal load bearing core yarn. This safety system is available on Twin-Path slings, High Performance K-Spec Fiber round slings, and polyester round slings. SparkEater Synthetic Slings (SE) - When you have a hot environment up to 300 F, use a Sparkeater to lift the load without marring the surface of the lifted piece. This is the only high performance, high temperature synthetic sling commercially available. Twin-Path Two Leg Bridles (TL) - Simply the lightest and strongest synthetic bridles in the world today. These are perfect to replace existing chain and wire rope bridles. This makes the Twin-Path Two Leg Bridle extremely versatile on the job. Twin-Path Eye & Eye Synthetic Sling (EE) - Usually an eye and eye sling is made from a round sling with a sleeve over it to form the eyes at each end. But our TPXCEE is a singlebodied sling with integrated eyes. It can be manufactured using either K-Spec core yarn or polyester. Wire Rope lbs. Twin-Path Adjustable Bridle Sling (TPXA or TPA) - This tool is an aid to finding the center of gravity. When the load is lifted the ring moves over the COG to balance and level the object. Fiber Optic Inspection (FO) - All Twin-Path slings have the Fiber Optic inspection. The condition of the internal core yarn can be inspected by checking the continuity of the fiber optic cable. The fiber optic cable will conduct light using natural, overhead or flashlight sources. Shackle Pin Pads - The Shackle Pin Pad is the ideal solution for the problem of sharp edges on the pin-side of a shackle. This pad is easy to connect and easy to remove. CornerMax Pad - The CornerMax cut protection device prevents an edge on the load from touching the sling. In fact the edge doesn t even touch the CornerMax protector! This protector will handle the most extreme circumstances lifting steel and concrete. CornerMax Pads are proven, tested sling protection from Slingmax for straight 90 edges. CornerMax Sleeve - The CornerMax sleeve is the latest in rigging protection from Slingmax Rigging Solutions. This sleeve will protect a synthetic sling from cutting on edges that are curved or irregular. 4

5 Check-Fast Inspection System Also known as the 3 Fast System The Check-Fast System is designed to improve job-site safety. The 3 Fast Tag and External Warning Indicator (EWI) on a round sling product provides for a pass/ fail inspection of the internal load bearing core yarn. Damage to the core yarn from ultraviolet (UV) light degradation, fiber on fiber abrasion, fatigue, and severe overload can be detected. If the sling is mistakenly overloaded beyond rated capacity, the EWI is designed to disappear before the sling fails. The sling inspector now has a GO/NO-GO inspection device rather than relying on a subjective hand-over-hand inspection to make an educated guess if the load bearing core yarns are in good condition. This safety system is available for High Performance K-Spec Fiber Round Slings or polyester round slings fabricated by authorized Slingmax Dealers. Twin-Path Adjustable Bridle The Twin-Path Adjustable Bridle Sling is a multi-purpose rigging tool and it s important that it is used properly. The adjustment ring has a double leg for the heavy side of the load and a single leg on the lighter side. See the Adjustable Bridle Product Manual for more information. GO NO-GO SEE THE EWI EWI MISSING Fiber Optic Inspection For Twin-Path Slings Twin-Path slings have the Fiber Optic inspection system. The condition of the internal core yarn can be inspected just by checking the continuity of the fiber optic cable. If crushing or cutting, heat or chemical damage, has occurred then the damage to the fiber optic cable will destroy its ability to transmit light from one end to the other giving the inspector a reason to remove the sling from service and send it in for repair evaluation. The fiber optic cable will conduct light using natural, overhead or flashlight sources. The inspector simply covers and removes his finger from one end and watches the other end for blinking which indicates that the sling is OK to use for another lift. If the lifting points are an equal distance from the center of gravity then the Twin- Path Adjustable can be hooked-up with the double or single leg on either lifting point. If one of the lifting points is closer to the center of gravity, then attach the double leg to this lifting point. It will have the highest weight concentration. If the Twin- Path Adjustable is attached so that the single leg is nearest the center of gravity, the lift cannot be made. If the lifting points are an equal distance on either side of the center of gravity but one is higher, then the double leg should be attached to the higher lifting point. The Twin-Path Adjustable Bridle should be used in applications where the double leg horizontal angle is greater than 45. Always connect above the center of gravity. If connections are made below the center of gravity, then the load may turn when lifted. certifiedslings.com 5

6 Synthetic Slings Web Slings Eye & Eye-Flat Type 3 Sling made with a flat loop eye on each end with loop eye opening on same place as sling body. This type of sling is sometimes called a flat eye and eye, eye and eye, or double eye sling. Eye & Eye-Twist Type 4 Sling made with both loop eyes formed as in Type 3, except that the loop eyes are turned to form a loop eye which is at a right angle to the plane of the sling body. This type of sling is commonly referred to as a twisted eye sling. (Bearing Point to Bearing Point) (Bearing Point to Bearing Point) Total customer satisfaction is the first priority for everyone at Certified Slings. Our customer s success is our passion. 6 One Ply Two Ply Three Ply Four Ply Width Rated Capacities (in) Vertical Choker Vertical Basket 1 1,600 1,280 3, ,100 2,480 6, ,700 3,760 9, ,200 4,960 12, ,800 6,240 15, ,300 7,440 18, ,750 9,400 23, ,700 11,760 29, ,650 14,120 35, ,100 2,480 6, ,200 4,960 12, ,800 7,040 17, ,000 8,800 22, ,700 10,960 27, ,500 13,200 33, ,750 18,200 45, ,400 22,720 56, ,100 27,280 68, ,100 3,300 8, ,300 6,600 16, ,500 10,000 25, ,000 12,800 32, ,200 15,400 38, ,000 18,400 46, ,700 24,500 61, ,800 29,400 73, ,000 35,200 88, ,500 4,400 11, ,000 8,800 22, ,450 13,160 32, ,400 16,320 40, ,500 20,400 51, ,600 24,480 61, ,700 31,700 79, ,600 39,600 99, ,500 47, ,000 Other sizes available upon request. Endless Type 5 Endless sling, sometimes referred to as a grommet. It is a continuous loop formed by joining the ends of the fabric together with a splice. One Ply Two Ply Width Rated Capacities (in) Vertical Choker Vertical Basket 1 3,200 2,560 6, ,200 4,960 12, ,400 7,520 18, ,400 9,920 24, ,600 12,480 31, ,600 14,880 37, ,150 16,920 42, ,450 21,160 52, ,750 25,400 63, ,200 4,960 12, ,400 9,920 24, ,600 14,080 35, ,000 17,600 44, ,400 21,920 54, ,000 26,400 66, ,350 33,880 84, ,900 42, , ,500 50, ,000 Reversed Eye Type 6 (RE) Reversed Eye slings have protective webbing over the entire body and eyes. This extra webbing reinforces the sling and protects it from wear, resulting in an exceptionally strong and rugged sling. (Bearing Point to Bearing Point)

7 Nylon Slings Type 1 Sling made with a triangle fitting on one end and a slotted triangle choker fitting on the other end. It can be used in a vertical, basket or choker hitch. (Bearing Point to Bearing Point) Type 2 Sling made with a triangle fitting on both ends. It can be used in a vertical or basket hitch only. One Ply Two Ply (Bearing Point to Bearing Point) Rated Capacities Width (in) Vertical Choker Vertical Basket 1 1,600 1,280 3, ,100 2,480 6, ,700 3,760 9, ,200 4,960 12, ,800 6,240 15, ,300 7,440 18, ,750 9,400 23, ,700 11,760 29, ,650 14,120 35, ,100 2,480 6, ,200 4,960 12, ,800 7,040 17, ,000 8,800 22, ,700 10,960 27, ,500 13,200 33, ,750 18,200 45, ,400 22,720 56, ,100 27,820 68,200 * Type 2 can not be used in a choker hitch. Three & Four Ply hardware slings are available upon request. Polyester Slings Round slings are endless in configuration and are constructed from endless yarns of 100% polyester fiber encased in a tough double wall polyester woven tube. Round slings are superior in their ability to conform to the shape of the load and may be used in all three types of hitches. Endless Round Slings Single Leg Sling 90 Vertical Bridal Slings Double Leg Sling 60 Vertical Choker Basket Color Purple 3,000 2,400 6,000 3,000 5,200 Green 6,000 4,800 12,000 6,000 10,400 Yellow 9,000 7,200 18,000 9,000 15,500 Gray 12,000 9,600 24,000 12,000 20,700 Red 14,000 11,200 28,000 14,000 24,200 Brown 17,000 13,600 34,000 17,000 29,300 Blue 22,000 17,600 44,000 22,000 38,000 Green 26,000 20,800 52,000 26,000 45,000 Green 32,000 25,600 64,000 32,000 55,200 Green 50,000 40, ,000 50,000 86,200 Green 60,000 48, ,000 60, ,500 Orange 70,000 56, ,000 70, ,200 Orange 80,000 64, ,000 80, ,500 Orange 90,000 72, ,000 90, ,800 How To Measure Permanently Assembled Slings Bearing Point to Bearing Point EN - Endless EE - Eye & Eye EE - An additional jacket of texturized, abrasion resistant material covers the body of the standard sling. Note: Use prefix (EE or EN) when ordering. DO SOS DOS Note: Multiple (two, three & four) leg bridle assemblies are available in round sling and web sling material. Call for sling angles and capacities. certifiedslings.com 7

8 Synthetic Slings Twin-Path Synthetic Slings Twin-Path Extra Sling with CoverMax and K-Spec Core Yarn TPXC - This is the world s first truly ergonomic sling with CoverMax covers for superior abrasion resistance. These are made in sizes up to 600 tons vertical rated capacity. Larger capacity slings are available on special order. These slings have overload indicators, inner red cover, and are used worldwide in place of wire rope slings for heavy lifts. They are approximately 10% of the weight of a steel sling. These products are repairable. The Twin-Path patented design provides the rigger with two connections between the hook and the load for redundant back-up protection. These slings have less than 1% stretch at rated capacity. If ergonomics, productivity and safety are important, then these slings are the only choice. This is the lightest and strongest sling on the market today with K-Spec the longest lasting load bearing core yarn, backed by independent testing. NOTE: Capacities shown include both paths and are for one complete sling. Sling ratings based on fittings of equal or greater capacity. Conforms to ANSI/ASME B30.9 chapter 6, NAVFAC P-307 section , and the Cordage Institute Roundsling Standard. This chart is based on a 5:1 Design Factor (DF); but any other DF can be fabricated. Higher capacity slings are available. CornerMax Pads Engineered Cut Protection CornerMax pads create a tunnel of cut protection a no-touch zone. Therefore, the edge does not come in contact with the pad or sling thus protecting the sling. Note that the sides of the load must completely support the pads in order to create and maintain the tunnel. We are one of the largest manufacturers of Slingmax slings in the Southeast United States! Vertical Choker Vertical Basket Basket Hitches Approx. Weight (lbs. per ft.) (Bearing-Bearing) Nom. Body Width (in.)* Mfg. # TPXCF/TPXC ,000 8,000 20,000 17,320 14, TPXCF/TPXC ,000 12,000 30,000 25,980 21, TPXCF/TPXC ,000 16,000 40,000 34,640 28, TPXCF/TPXC ,000 20,000 50,000 43,300 35, TPXCF/TPXC ,000 24,000 60,000 51,960 42, TPXCF/TPXC ,000 32,000 80,000 69,280 56, TPXCF/TPXC ,000 40, ,000 86,600 70, TPXCF/TPXC ,000 48, , ,920 84, TPXCF/TPXC ,000 56, , ,240 98, TPXCF/TPXC ,000 68, , , , TPXCF/TPXC ,000 80, , , , TPXCF/TPXC , , , , , TPXCF/TPXC , , , , , TPXCF/TPXC , , , , , TPXCF/TPXC , , , , , TPXCF/TPXC , , , , , TPXCF/TPXC , , , , , TPXCF/TPXC , , , , , TPXCF/TPXC , , , , , TPXCF/TPXC , ,000 1,000, , , TPXCF/TPXC , ,000 1,200,000 1,039, , CAPACITIES ARE IN POUNDS (LBS.). METRIC SLINGS AVAILABLE * Dimensions can vary according to the hardware or bearing points the slings are used with. Minimum is tapered width; Maximum is the flat tubing width. Warning: Sling can fail if damaged, misused or overloaded. Inspect before use. Damaged sling shall not be used. Use only if trained. Do not exceed rated capacity. Protect sling from being cut by load edges, corners, protrusions and abrasive surfaces. Avoid exposure to acid, alkali and temperatures over 180 F. DEATH or INJURY can occur from improper use or maintenance. Simulated load edge Sling CornerMax Mfg. # Width (in.) Approx. Width (in.) Approx. Wt. (lbs) CRNMX02 1 & CRNMX CRNMX CRNMX CRNMX CRNMX CRNMX CRNMX CRNMX NOTE: All CornerMax pads are approximately 9 inches in length unless otherwise specified. Warning: Damaged or misused protection can result in damage or sling failure. Inspect before each use. Inspect for cuts, tears or damage that may prevent protection of the sling. Ensure protection is the correct size and type to protect the sling. Prevent pads and sling from slipping or sliding across load edge. DEATH or INJURY can occur from improper use, maintenance and/or inspection. MAXIMUM LOADING: Do NOT exceed 25,000 lbs. per inch of sling width. 8

9 CornerMax Sleeves Engineered Cut Protection The CornerMax sleeve is the latest in rigging protection from Slingmax Rigging Solutions. The CornerMax sleeve is the ideal solution to protect synthetic slings from cutting when it is not practical to use a CornerMax pad, whether due to curvature of the load edge or repetitive uses such as unloading steel coils. Independent field and laboratory testing has shown the CornerMax sleeve to be extremely cut resistant. The CornerMax sleeve is made with high tech fiber and is proven tough. In some applications the CornerMax sleeve may be attached to the sling to prevent slippage. The true benefits of this revolutionary material far outweigh the costs and now provide for the use of synthetic slings in applications previously dominated by heavy chain, mesh and wire rope slings. Synthetic Armor Pads Abrasion Protection Synthetic Armor pads protect slings from abrasion damage which can be caused by contact with rough surfaces such as concrete beams and structures. They are also used to protect finished or painted loads from marring. These pads can be made to fit any length or width sling. They can also be made in long lengths which the customer can cut into suitable sizes on the job. Double or triple thickness provides resistance for the more severe conditions. There is no maximum width and a variety of materials are used to protect slings and to protect loads depending on the degree of abrasion expected in the application. SYNARM RM Removable SYNARM SL Sliding SYNARM EE Eye and Eye External Sleeve Width (in.) Fastened over both legs of Twin-Path Sling Mfg. # CRNMXS04 6 Up to TPXC 7,000 CRNMXS10 10 Up to TPXC 25,000 NOTE: Wider sleeves are available. Shackle Pin Pads The pin area of a shackle can cause synthetic slings to cut or tear. Placing synthetic slings on the pin should be avoided. Any shackle can have a sharp edge where the threaded pin goes through the shackle ear. If the sling is exposed to this area, it can cut and fail. If you must rig on the pin, protect your sling with a Shackle Pin pad. Twin-Path Coil Sling 10 times lighter than conventional steel coil gripper slings. The Twin-Path Coil Sling is so light that it is easy to grab and pull the sling. Will not damage the load. Repairable as manufacturer can remove a damaged CornerMax sleeve and sew a new one to the sling. Warning: Damaged or misused protection can result in damage or sling failure. Inspect before each use. Inspect for cuts, tears or damage that may prevent protection of the sling. Ensure protection is the correct size and type to protect the sling. Prevent sleeve and sling from slipping or sliding across load edge. DEATH or INJURY can occur from improper use, maintenance and/or inspection. MAXIMUM LOADING: Do NOT exceed 25,000 lbs. per inch of sling width. Sized for the model of shackle. Protects sling along entire pin including ear seams. Three connection points secure pad to shackle. Install and uninstall in seconds. Warning: Can cause damage or failure of sling if misused or damaged. Inspect before each use. Inspect for cuts, tears or damage that may prevent protection of the sling. Be sure wear protection is the correct size and type to protect the sling. DEATH or INJURY can occur from improper use or maintenance. certifiedslings.com 9

10 Wire Rope Slings Wire Rope Sling Standard Combinations Bridle Wire Rope Slings With Eye Hoist Hooks How to Measure Slings Rope Diameter - Inches (Bearing point to bearing point) Sling - Feet (Bearing point to bearing point) Sliding Choker Rope EIPS Capacities (tons) (Angle to Horizontal) Alloy Oblong Master Link* Eye Hook Minimum Sling Configuration Dia Dia. (tons) ** 2-Leg Bridle 1/ /2 3/4-A 1'3" 3/ /2 1-1/2-A 1'8" 1/ /4 3-A 2' 5/ A 2'4" 3/ A 2'9" 7/ /4 11-A 3'3" /2 11-A 3'6" 1-1/ /2 15-A 4' 1-1/ /4 15-A 4'6" 1-3/ /4 22-A 5' 1-1/ A 5'6" 1-3/ /4 30-A 6'6" /2 37-A 8' 2-1/ /4 45-A 8'9" 3-Leg Bridle 1/ /2 3/4-A 1'3" 3/ /4 1-1/2-A 1'8" 1/ A 2' 5/ /4 5-A 2'4" 3/ /4 7-A 2'9" 7/ /2 11-A 3'3" /4 11-A 3'6" 1-1/ /4 15-A 4' 1-1/ A 4'6" 1-3/ A 5' 1-1/ /4 22-A 5'6" 1-3/ /4 30-A 6'6" /4 37-A 8' 2-1/ /4 45-A 8'9" 4-Leg Bridle 1/ /4 3/4A 1'3" 3/ /4 1-1/2A 1'8" 1/ A 2' 5/ /4 5-A 2'4" 3/ /2 7-A 2'9" 7/ /4 11-A 3'3" A 3'6" 1-1/ A 4' 1-1/ /4 15-A 4'6" 1-3/ (Pear Link) 2-3/4 22-A 5' 1-1/ (Pear Link) 2-3/4 22-A 5'6" 1-3/ (Pear Link) 2-3/4 30-A 6'6" (Pear Link) 3-1/4 37-A 8' * In some cases, oblong master links are larger in capacity than required, but are sized to accommodate heavy duty thimbles. If thimbles are not required, a smaller master link can sometimes be used. **Does not include hardware. 10 Interior Circumference Note: Proof testing with certification is available for all slings.

11 Standard Eye & Eye Wire Rope Slings Braided Body Wire Rope Slings Single Leg 6 Part 6P1 Flat Braid Rated capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter. Rated capacities based on design factor of 5 to 1. Horizontal sling angles less than 30 shall not be used. EIPS Capacities (tons) Eye Hook (tons) Standard Eye Dimensions (W" x L") Thimbled Eye Dimensions (W" x L") Min. Eye & Eye Sling Rope Dia. Vertical Choker Hitch Vertical Basket* 1/ /4-A 2 4 7/8 1-5/8 1'6" 5/ A 2-1/ /16 1-7/8 1'9" 3/ /2-A /8 2-1/8 2' 7/ A 3-1/ /2 2-3/4 2'3" 1/ A /2 2-3/4 2'6" 9/ A 4-1/ /2 2-3/4 2'9" 5/ A /4 3-1/4 3' 3/ A /4 3'6" 7/ A /4 4-1/4 4' A /2 4-1/2 4'6" 1-1/ A /8 5-1/8 5' 1-1/ A /8 5-1/8 5'6" 1-3/ A /2 6-1/4 6' 1-1/ A /2 6-1/4 7' 1-3/ A /2 9 8' A ' 2-1/ A ' 2-1/ A ' 2-3/ ' ' *Rated capacities basket hitch based on D/d ratio of 25 XIP IRWC XIP IRWC Width of Body Thickness of Body Vertical Rated Capacities (tons)* Basket Hitch Choker Hitch Eye Slip Thru Thimble ST Heavy Thimble HT Rope Dia A B 3/16 1-3/16 1/ W-3 1/2 1/4 1-1/8 11/ W-4 5/8 5/16 1-3/8 7/ W-4 3/4 3/8 1-11/ W-5 7/8 7/ / W-5 1 1/2 2-1/4 1-5/ W-6 1-1/8 9/16 2-1/2 1-1/ W-6 1-3/8 5/8 2-13/ / W-7 1-1/2 3/4 3-3/ W-8 1-5/8 7/ / W /2 2-11/ W-10 - Sling Diameter Vertical 8 Part 8P1 Round Braid Data taken from ASME Rated Capacities (tons)* Basket Hitch Eye Choker Hitch Data taken from ASME *Rated Capacities Basket Hitch based on D/d ratio of 25 times the component rope diameter. Slip Thru Thimble ST Heavy Thimble HT Rope Dia A B 3/16 13/ W-3 1/2 1/4 1-1/ W-4 3/4 5/16 1-3/ W-5 1 3/8 1-11/ W-5 1-1/8 7/ W-6 1-1/4 1/2 2-1/ W-7 1-3/8 9/16 2-1/ W-7 1-1/2 5/8 2-13/ W-8 1-3/4 3/4 3-3/ W-9 2 7/ W / W-10 - * Rated Capacities Basket Hitch based on D/d ratio of 20 times the component rope diameter. Rated Capacities based on pin diameter no larger than natural eye width or less than the nominal sling diameter. Rated Capacities based on design factor of 5 to 1. Sling angles of less than 30 degrees shall not be used. All capacities in tons of 2,000 Ibs. All eye and fitting dimensions in inches. certifiedslings.com 11

12 How to Order the Proper Chain Sling Include the following when ordering: Type of Sling S Single Chain D Double Chain T Triple Chain Q Quadruple Chain Adjustable Styles: ASB Single Style B ADB Double Style B Type of Master Attachment O Oblong Link P Pear Link R Ring S Sling Hook G Grab Hook F Foundry Hook Type of End Attachment O Oblong Link P Pear Link R Ring S Sling Hook G Grab Hook F Foundry Hook 12 How to Measure (Bearing Point to Bearing Point) How to Select the Proper Chain 1. Determine the maximum weight of LOAD. 2. From the working load limit chart above, determine the SIZE of the body chain. Be sure to consider the effect of the angles. 3. Determine the REACH for the selected angle by measuring the distance from the upper bearing surface of the master link to the bearing surface of the lower attachment. Chain Slings Crosby ELIMINATOR Standard Industry Chain Sling Terminology The Crosby ELIMINATOR uses standard industry terminology to make changeover to the system easier. Adjustable chain slings utilizing the Crosby ELIMINATOR fittings retain standard sling abbreviations. Simply adding the letter E to the standard sling type means the sling has been assembled with the Crosby Eliminator. No more confusion or uncertainty over Style A, Style B, Style 1 or Style 2 adjustable slings. These style designations aren t needed with the Crosby ELIMINATOR (see below). The slings shown here are standard assemblies that can be made from Proof Tested Crosby components and alloy chain supplied by your authorized Crosby distributor. Assemblies must include chain sling identification tag. ESOS ESOG ESOL ESOF Type ESOS ESOG ESOL ESOF EDOS EDOG EDOL EDOF ETOS ETOG ETOL ETOF EQOS EQOG EQOL EQOF EDOS EDOG EDOL ETOS ETOL EQOS EQOL ETOG ETOF EQOG EDOF EQOF Crosby ELIMINATOR Description ELIMINATOR Single Chain Sling with Sling Hook ELIMINATOR Single Chain Sling with Grab Hook ELIMINATOR Single Chain with SHUR-LOC Hook ELIMINATOR Single Chain with Foundry Hook ELIMINATOR Double Chain Sling with Sling Hooks ELIMINATOR Double Chain Sling with Grab Hooks ELIMINATOR Double Chain Sling with SHUR-LOC Hooks ELIMINATOR Double Chain Sling with Foundry Hooks ELIMINATOR Triple Chain Sling with Master Link and Sling Hooks ELIMINATOR Triple Chain Sling with Master Link and Grab Hooks ELIMINATOR Triple Chain Sling with Master Link and SHUR-LOC Hooks ELIMINATOR Triple Chain Sling with Master Link and Foundry Hooks ELIMINATOR Quad Chain Sling with Master Link and Sling Hooks ELIMINATOR Quad Chain Sling with Master Link and Grab Hooks ELIMINATOR Quad Chain Sling with Master Link and SHUR-LOC Hooks ELIMINATOR Quad Chain Sling with Master Link and Foundry Hooks Crosby Grade 100 Chain Sling Configurations CO SOS SOG SOF SSS SGS ASOS ASOF ASOG SOCH DOS DOG DOF ADOS ADOG DOCH TOS TOG TOF TOCH QOS QOG QOF Type CO SOS SOG SOF SSS SGS ASOS ASOF ASOG SOCH DOS DOG DOF ADOS ADOG DOCH TOS TOG TOF TOCH QOS QOG QOF Description Single Chain Sling with Master Link each end Single Chain Sling with Master Link and Sling Hook Single Chain Sling with Master Link and Grab Hook Single Chain Sling with Master Link and Foundry Hook Single Chain Sling with Sling Hook each end Single Chain Sling with Grab Hook and Sling Hook Adjustable Single Chain with Master Link and Sling Hook Adjustable Single Chain Sling with Master Link and Foundry Hook Adjustable Single Chain Sling with Master Link and Grab Hook Single with 1355 Choker Double Chain Sling with Master Link and Sling Hook Double Chain Sling with Master Link and Grab Hook Double Chain Sling with Master Link and Foundry Hook Adjustable Double Chain Sling with Master Link and Sling Hook Adjustable Double Chain Sling with Master Link and Grab Hook Double with 1355 Choker Triple Chain Sling with Master Link and Sling Hook Triple Chain Sling with Master Link and Grab Hook Triple Chain Sling with Master Link and Foundry Hook Triple with 1355 Choker Quadruple Chain Sling with Master Link and Sling Hook Quadruple Chain Sling with Master Link and Grab Hook Quadruple Chain Sling with Master Link and Foundry Hook Grade 100 Alloy Chain Cut lengths and full drums available. Call for more details. Trade Size (in.) Min. Weight per ft. Work Load Limit 9/ ,300 3/ ,800 1/ ,000 5/ ,600 3/ ,300 7/ , ,700

13 Hoists LB Lever Hoist 3 4, 1, 1-1 2, 2, 2-3 4, 3, 6, and 9 Ton Capacity The LB Series of lever hoists offers a low headroom, compact design that is perfect for use in tight quarters. Regarded as the best lever hoist in the industry, our LB is recommended for use in heavy-duty construction work, mining, manufacturing, shipbuilding and day-to-day maintenance and repair. CF Hand Chain Hoist 1/2 through 5 Ton Capacity Kito CF hand chain hoists give you a practical alternative thanks to an economical design using fewer parts for trouble-free service. Outstanding durability is due to a die-cast aluminum body and high-strength, heattreated main pinion shaft and load gear. Pre-lubricated ball bearings, precision machined gears, and Weston-style load brake make lifting smooth and easy while allowing long service and low maintenance. Pull to Lift Load * Load Chain Diameter (mm) x Chain Fall Lines Net Weight Optional Load Limit Warning Handle Shipping Weight Approx Standard Handle Weight for Add'l One Foot of Lift Cap. (tons) Mfg. # Std. Lift (ft.) 3/4 LB (36) 5.6 x LB (46) 5.6 x /2 LB (45) 7.1 x LB (42) 8.8 x /4 LB (57) 8.8 x LB x LB x LB x LX Lever Puller 1 4 and 1 2 Ton Capacities Kito s LX mini puller is lightweight, compact and built to perform. It fits conveniently in a toolbox and will easily handle pulling and moving jobs in many applications including transportation, construction and plumbing. Available in two capacities to fit all applications. The 1 2 Ton capacity is unique to the industry. Capacity (tons) Headroom (in.) Std. Lift (ft.) Pull to Lift Load Load Chain Diameter (mm) x Chain Fall Lines Net Wt. Approx. Shipping Weight Weight for Additional One Foot of Lift Mfg. # 1 4 LX x LX x Ton 1 2 Ton Std. Lift (ft.) Pull to Lift Load Overhaul Ratio Load Chain Diameter (mm) x Chain Fall Lines Net Weight Shipping Weight Weight for Add'l One Foot of Lift Capacity (tons) Mfg. # 1/2 CF x CF x /2 CF x CF x CF x CF x ED Electric Chain Hoists with Hook Suspension and Mini Trolley Features a double braking system, compact design, heavy duty motor, high performance friction clutch and heat treated gearing. DS Model features speed flexibility - low speed adjustable from 0 to 100% of maximum speed by setting screw inside the pendant. DA Model features in-line hand grip, high/low speeds and removable bottom hook Lifting Speed (ft/min) Single Dual Dual DS & Cap. (lbs) Speed S Model # Speed DS Model # Adjustable DA Model # S Model DA Model 125 ED125S ED125DS ED125DA 69 69/ ED220S ED220DS ED220DA 43 43/ ED250S ED250DS ED250DA 26 26/ ED350S ED350DS ED350DA 66 66/ ED400S ED400DS ED400DA 26 26/ ED525S ED525DS ED525DA 44 44/ ED1050S ED1050DS n/a 22 22/6 ED250S ED525DA certifiedslings.com 13

14 Recognized as Kito s Distributor of the Year, Certified Slings & Supply offers a full line of Kito products and replacement parts. Our goal is to deliver the best customer experience in the industry. 14 Contact us today. We look forward to helping you with all of your Kito hoist products, inspections and repairs. Hoists NER/ER Electric Chain Hoists with Hook and Lug Suspensions These UL Listed hoists feature easy access suspension, notched hook and latch system, limit switches, extended chain life, high air flow, unique load sheave, friction clutch and load brake, standard count hour meter, mechanically interlocked contactors on single speed models, high strength, corrosion and wear resistant load chain, dual speed VFD, Smart Brake Technology and pendant controls. Single Speed Cap. (Tons) Standard Lift (ft) Push Button Cord (ft.) Lifting Speed (ft/min) Lifting Motor 3 Phase 60 Hz Load Rated Current Chain (amps) Dia. (mm) x Chain Fall Lines Output Net Wt. Mfg. # NER ER 1/8 (N)ER001H x /4 (N)ER003S x /4 (N)ER003H x /2 (N)ER005L x /2 (N)ER005S x (N)ER010L x (N)ER010S x /2 (N)ER015S x (N)ER020C x (N)ER020L x (N)ER020S x /2 (N)ER025S x (N)ER030L x (N)ER030C x (N)ER050L x /8 (N)ER001HD 55/ x /4 (N)ER003SD 36/ x /4 (N)ER003HD 53/ x /2 (N)ER005LD 15/ x /2 (N)ER005SD 29/ x (N)ER010LD 14/ x (N)ER010SD / x /2 (N)ER015SD 10 18/ x (N)ER020CD 7/ x (N)ER020LD 14/ x (N)ER020SD 28/ x /2 (N)ER025SD 22/ x (N)ER030LD 17/6 4.7/ / / x (N)ER030CD 17/ x (N)ER050LD 11/ x Although both 208/230 & 460 Volts are shown together, the motors are NOT reconnectable. Speed ratio is 6:1 with adjustability up to 12:1. Dual Speed NER/ER010L (Shown with optional canvas chain container) Trolleys PT Push Trolley and GT Geared Trolley Push trolley: 1/2 10 Ton capacity Geared trolley: 1/2 20 Ton capacity Kito push and geared trolleys help you maneuver easily on your most demanding lifting operations. They feature specially designed contoured wheels that ensure reliable tracking, and their sealed ball bearings avoid maintenance hassles and provide smooth operation. PT Push Trolley GT Geared Trolley Capacity (tons) Net Weight Shipping Wt. Min. Radius for Curve (in.) PT Push Trolley (GT Geared Trolley shown in left column) Flange Width Adjustability B (in.) Mfg. # Standard Option 1/2 PTF to to 8 or 8.01 to 12 1 PTF to to 8 or 8.01 to /2 2 PTF to to /2 3 PTF to to 12 5 PTF to to 12 8 PT to to PT to to 12 1/2 1 GTF to to 8 or 8.01 to /2 2 GTF to to /2 3 GTF to to 12 5 GTF to to 12 8 GT to to GT to to GT to to GT to to 12

15 Clamps Crosby Vertical Clamps Universal - For Lifting In Any Direction Features: available in capacities of.5 thru 30 metric tons (higher Working Load Limits available upon request). Wide variety of jaw openings available: 0 to Individually Proof Tested to 2 times the Working Load Limit with certification. Company name (IP), logo, Working Load Limit and jaw opening permanently stamped on body. Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included IPU10 IPU10S / IPU10H on the test certificate with maintenance and warranty log book. Full 180 turning range for material transfer, turning or moving. Lock open, lock closed ability with latch for pretension on material and then release of material. Optional IP-5000 Stinger assembly available. Allows for easy connection between the clamp and hoist hook. All sizes are rfid equipped. Crosby Horizontal Clamps For Horizontal Lifting and Transfer Features: available in capacities of.75 thru 25 metric tons. Wide variety of jaw openings available: 0 to 4. Welded alloy steel body for strength and smaller size. Forged alloy components, where required. Individually Proof Tested to 2 times the Working Load Limit with certification. Each product is individually serialized, with the serial number and Proof Load test date stamped on body. Serial number is included on the test certificate with maintenance and warranty logbook. Manufactured by an ISO 9001 facility. All sizes are rfid equipped. Available in a variety of styles: IPU10 - Standard clamp for materials with a surface hardness to 37Rc (345 HB). IPU10J - Larger jaw opening. IPU10S - For use with Stainless Steel material. IPU10H - For use with materials with a surface hardness to 47Rc (450 HB). Renfroe Vertical Clamps Model FR Girder Clamps Model JPA Renfroe Beam Clamps Model BC Fixed Jaw Adjustable Girder Clamps One piece adjustable design Positive Grip left/right threaded Used for lifting, pulling or as adjusting bar an anchor point Designed with maximum safe No tools required for jaw grip adjustment mounting/removal For use at up to 15 from vertical Integrated lifting shackle IPHTONZ - use in the lifting and transfer of non-sagging material or of bundles of non-sagging material (in horizontal position). These clamps must be used in pairs or more. Crosby Clamp-Co Beam Clamps IPHOZ - used for lifting and transferring, in the horizontal position, of thin sheet and other materials that will sag or bend when lifted. These clamps must be used in pairs or more. Crosby Clamp-Co Beam Clamps provide an efficient method for handling wide flange beam sections and plate girders. When lifting, these beam clamps grip the beam at three points, and when properly balanced and safely guided, the beam can be handled even if the clamp is slightly off center lengthwise. Capacities: 5 Tons to 35 Tons. Eliminates the need for slings, chokers, and spreader bars. When applied to load, the tongs automatically open and slide under the flange of the beam. Center plate and gripping tongs work together - the heavier the beam, the greater the clamping pressure. Model NS clamps have a recessed base to accept studs welded to the beam surface. Individually Proof Tested to 2 times the Working Load Limit with certification. Finish - Red Paint All sizes are RFID equipped. NOTE: Control the beam at all times. Beams should be gripped as near the center as possible. Snubbing lines at each end must be used to control excessive twisting or swinging, and to guide the beam to its proper place. Each lifting situation may have a specific demand which should be addressed before lifting. certifiedslings.com 15

16 Have A Specific Crosby Product In Mind? As a full service authorized distributor of Crosby, Certified Slings has access to all Crosby products and services. We can help. Call any of our service centers or go to certifiedslings.com and ask us. 16 Rigging Hardware Crosby Forged Wire Rope Clips Each base has a Product Identification Code (PIC) for material traceability, the name CROSBY or CG, and a size forged into it. Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 1/8" - 7/8" sizes, and 90% for sizes 1" through 3-1/2". The entire clip is galvanized to resist corrosive and rusting action. Sizes 1/8" through 2-1/2" and 3" have forged bases. Clip sizes up through 1-1/2" have rolled threads. Look G-450 for the Red-U-Bolt, your assurance of Genuine Crosby Clips. Crosby Clips, all sizes 1/4" and larger, meet the performance requirements of Federal Specification FF-C-450 TYPE 1 CLASS 1, except for those provisions required of the contractor. Crosby Fist Grip Wire Rope Clips Entire clip is Galvanized to resist corrosive and rusting action. Based on the catalog breaking strength of wire rope, Crosby wire rope clips have an efficiency rating of 80% for 3/16" - 7/8" sizes, and 90% for sizes 1" through 1-1/2". All sizes have forged steel saddles. Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these wire rope clips meet other critical performance G-429 requirements including fatigue life, impact properties and material traceability, not addressed by ASME B Assembled with standard heavy hex nuts. Fist Grip wire clips meet or exceed the performance requirements of Federal Specification FF-C-450 Type III, Class 1, except for those provisions required of the contractor. Crosby Screw Pin Anchor Shackles These screw pin anchor shackles are available in capacities from 1/3 to 55 metric tons. Working Load Limit permanently shown on every shackle. Comes in hot dip galvanized or self colored. Shackles 25t and larger are RFID equipped. Crosby products meet or exceed all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, G-209 Crosby products meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B Look for the Red Pin the mark of genuine Crosby quality. Crosby Bolt Type Anchor Shackles Available in capacities from 1/3 to 150 metric tons, grade 6. Working Load Limit and grade 6 permanently shown on every shackle. Forged Quenched and Tempered, with alloy pins. Shackles 25t and larger are RFID equipped. Approved for use at -40 C (-40 F) to 204 C (400 F). Meets or exceeds all requirements of ASME B Shackles 85 metric tons and larger are individually proof G-2130 tested to 2.0 times the working load limit. Shackles 120 metric tons and larger are proof tested, Magnetic Particle Inspected and provided with Serialized Pin and Bow. Look for the Red Pin the mark of genuine Crosby quality. Crosby Grade 100 Alloy Master Links Alloy Steel Quenched and Tempered. Proof Tested with 60% inside width special fixtures sized to prevent localized point leading per ASME A-952. Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements. Importantly, these links meet other critical performance requirements A-342 including fatigue life, impact properties and material traceability, A-345 not addressed by ASME B Selected sizes designated with W in the size column have enlarged inside dimensions to allow additional room for sling hardware and crane hook. Incorporates patented QUIC-CHECK deformation indicators. Crosby Grade 100 Alloy Master Links Alloy Steel - Quenched and Tempered. Individually proof tested to values shown with certification. Proof tested with fixture sized to prevent localized point loading per ASTM A952. Proof test certification shipped with each link. All sizes are drop forged. Look for the Platinum Color - Crosby Grade 100 Alloy Products. Engineered Flat for use with S-1325A coupler link. A-1342N

17 Crosby Alloy Master Link Assembly Alloy Steel - Quenched and Tempered. Proof tested with fixture sized to prevent localized point loading per ASTM A952. Proof test certification shipped with each link. All sizes are drop forged. Look for the Platinum Color - Crosby Grade 100 Alloy Products. Engineered Flat for use with S-1325A coupler link. A-1345N Crosby LOK-A-LOY 10 Alloy Connecting Links Suitable for use with both Grade 80 and Grade 100 chain. Individually Proof Tested at 2-1/2 times Working Load Limit with certification. Locking system that provides for simple assembly and disassembly - no special tools needed. 25% stronger than Grade 80. Meets ASTM A standards for Grade 100 chain fittings. Forged Alloy Steel - Quenched and Tempered. Fatigue rated. Crosby Grade 100 Chain Fittings Forged Alloy Steel - Quenched and Tempered. Individually Proof Tested with certification. Rated for Grade 100 chain in choker applications. Each hook has a Product Identification Code (PIC) for material traceability, along with the size and the name Crosby & U.S.A. in raised letters. 25% stronger than Grade 80. Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles. Look for the Platinum Color - Crosby Grade 100 Alloy Products. For use with S-1325 Chain Coupler Link. Crosby Grade 100 Chain Fittings Designed to connect Grade 100 chain fittings produced with Engineered Flat to Grade 100 chain. Forged Alloy Steel - Quenched and Tempered. Suitable for use with Grade 100 and Grade 80 chain. Individually Proof Tested to 2-1/2 times the Working Load Limit with certification. Locking system that provides for simple assembly and disassembly no special tools required. Fatigue rated at 1-1/2 times the Working Load Limit at 20,000 cycles. Look for the Platinum Color Crosby Grade 100 Alloy Products. A-1337 A-1355 S-1325A Crosby Solid Wire Rope Thimbles Cast Ductile Iron. Fits pin for open wire rope socket, boom pendant clevis and wedge socket. Crosby Wire Rope Wedge Sockets The S-421T Wire Rope Wedge Socket meets the performance requirements of Federal Specification RR-S-550D, Type C, except those provisions required of the contractor. Wedge socket terminations have an efficiency rating of 80% based on the catalog strength of XXIP wire rope. The basket is cast steel and individually magnetic particle inspected. The pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter sockets. It secures the tail or dead end of the wire rope to the wedge, thus eliminates loss or Punch out of the wedge. It also eliminates the need for an extra piece of rope, and is easily installed. Available with Bolt, Nut, and Cotter Pin. A-412 S-421T The TERMINATOR wedge eliminates the potential breaking off of the tail due to fatigue. The tail, which is secured by the base of the clip and the wedge, is left undeformed and available for reuse. Incorporates Crosby s patented QUIC-CHECK Go and No-Go feature cast into the wedge. The proper size rope is determined when the following criteria are met: 1) The wire rope should pass thru the Go hole in the wedge. 2) The wire rope should NOT pass thru the No-Go hole in the wedge. Crosby S423T SUPER TERMINATOR Wedge socket terminations have a minimum efficiency rating on most high performance, high strength, compacted strand, rotation resistant wire ropes of 80% based on the catalog breaking strength of the various ropes.** The patent pending design eliminates the difficulty of installing high performance wire rope into a wedge socket termination. Proper application of the Super TERMINATOR eliminates the first load requirement of conventional wedge socket terminations. S-423TW Wedge Kit can be retrofitted onto existing Crosby S-421T TERMINATOR wedge sockets. S-423T The basket is cast steel and individually magnetic particle inspected. Pin diameter and jaw opening allows wedge and socket to be used in conjunction with closed swage and spelter sockets. Secures the tail or dead end of the wire rope to the wedge, thus eliminates loss or punch out of the wedge. Eliminates the need for an extra piece of rope, and is easily installed. The TERMINATOR wedge eliminates the potential breaking off of the tail due to fatigue. The tail, which is secured by the base of the clip and the tension device, is left undeformed and available for reuse. ** NOTICE: Due to the unique construction of various ropes, Crosby cannot make a broad general statement that all current and future design of ropes, when properly assembled with the Super TERMINATOR, will achieve a minimum 80% termination efficiency. Contact us to determine efficiency rating for a specific rope. certifiedslings.com 17

18 Fall Protection Body Harnesses EXOFIT NEX Full Body Harness Features: Covered Labels and i-safe Revolver Vertical Torso Adjusters Duo-Lok Quick Connect Buckles Built-In Carrying Pocket Tech-Lite Aluminum D-rings Protective Shoulder Caps Repel Technology Webbing Integrated Trauma Straps Stand-Up Dorsal D-ring Order the right EXOFIT NEX harness for the job: Vest Style Climbing/Positioning Harness Climbing Cross-Over Climbing Positioning Construction Style Retrieval Construction/ Climbing Style Delta Arc Flash Harness Delta Vest Style Harness (3-D Ring) Delta Vest Hi-vis Reflective Harness Pro Vest-Style Harness Back D-ring Pass-thru buckle legs Pro Vest-Style Harness Back and side D-rings Pass-thru buckle legs Delta Construction Harness ExoFit XP Construction Style Harness Pro Construction Harness Self-Retracting Lifeline Systems EZ-Stop II Retrax Lanyard Single Leg with snap hooks at each end x 6' (1.8m). EZ-STOP II Retrax 100% Tie-off Lanyard ExoFit Tower Harness ExoFit Nex Tower Climbing Harness REBEL TALON ULTRA-LOK 18

19 Nano-Lok Lifelines Single-Leg Self-Retracting A B C D Twin-Leg Self-Retracting F 6' 2-Leg Shock Absorbing Lanyards 100% Tie-Off Shock Absorbing Lanyards E Pro Shockwave 2 Pro A. Steel Snap Hook and Steel Carabiner B. Aluminum Carabiner on one end, Captive Eye Aluminum Carabiner on the other end C. Steel Rebar Hook Lifeline Systems D. Two Steel Snap Hooks and Twin Leg Connector E. Twin-Leg Quick Connector and two Steel Rebar Hooks F. Twin Leg Connector and two Captive Eye Aluminum Carabiners. Pro Stretch Wrapbax 2 Pro Stretch 5/8" Polyester/ Polypropolene Lifeline with Snap Hook One End Only 60' Sayfline Cable Horizontal Lifeline System ShockWave2 Anchor Products Shockwave 2 Web Loop Shockwave 2 Web Loop Steel Plate Anchor 60 EZ-Line Retractable Horizontal Lifeline System 60' Sayfline Synthetic Horizontal Lifeline Systems Trolley For I-Beam Fits 3 to 8 flange up to 11/16 thick Roofer s Fall Protection Kit with 50' Sayfline system, two reusable roof anchors and bag Glyder II Horizontal Sliding Beam Anchor Fits 3.5" to 14" wide I-beam SRL not included Roofer s Fall Protection Kit with Roof Anchor Fixed Beam Anchor 6' Pro Web Sling certifiedslings.com 19

20 310 W Melody Lane Casselberry, FL USA Phone: Fax: certifiedslings.com Proud Member Since 1984