Agpro. Flush Valves TECHNICAL DATA / SPECIFICATIONS / APPLICATION GUIDE
|
|
- Rebecca Banks
- 5 years ago
- Views:
Transcription
1 TECHNICAL DATA / SPECIFICATIONS / APPLICATION GUIDE Over 20 types to satisfy all your flushing needs. Agpro Flush Valves are fully operational units designed for one purpose, flushing animal wastes. These valves provide control and release of large volumes of flush water in a ready-to-install package. With models ideally suited to both reservoir and pump supplied flush applications they re perfect for cleaning feed lanes, parlors, housing facilities and even small areas such as calf barns, treatment pens and working areas. User friendly designs provide for ease of operation and rugged construction for long, maintenance free service. Flush Valves
2 Agpro FLUSH VALVES FEATURES BENEFITS RESULTS All pneumatic or manual operation Cushioned air close cycle Heavy galvanized steel or all stainless construction Firestone Airstroke air actuators 12 or 16 diameter inlets Complete unit housed below floor with pop-up lid (1) Bolt-on flanged or slip coupler mount Simple, no wiring No electrical reuirements No water hammer Superior strength, corrosion resistant Low maintenance Long life, smooth operation National manufacturer, No air cylinders Custom Fit flow rates Protected from animals and vehicles Virtually maintenance free Working only with light weight flange during gluing process, No gluing directly to valve (1) Manual and some specialty models mount above floor. Minimize water usage Ultimate freeze protection, No extra space reuired Simple installation, No destroyed valves during installation Installing an SF12x20 Flush Valve, our most popular model. Typical Installation Seuence: Determine finish floor elevation. Cut riser to appropriate height and glue lightweight flange in place. Attach valve to flange with mounting hardware. Secure valve. Attach airline. Pour in place. FLUSH!
3 Freuently Asked What slopes can I flush? Slopes from 1.5 to 4% are considered ideal, however slopes from 0.5% to 10% are being successfully flushed. Reuest technical assistance from our staff for special applications. In general, the greater the slope the less water used at each flushing. How long of a lane can be flushed at once? Lengths up to 2,400. Lanes of 1,000 or less are preferred. Longer lanes reuire additional flush volumes and larger collection areas. (For lanes greater than 700 in length a minimum 1.5% slope is recommended.) When flushing over 1,000 you may want to consider a second flush valve part way down to improve efficiency. Is it too cold to flush in Minnesota? No, cold alone does not preclude flushing. The same freezing problems that affect flush systems similarly limit other waste cleanup systems. We have successful flush systems operating in Alaska, Canada, Maine, Minnesota, New York and other cold areas. Inuire about special design features to enhance cold weather operations. I ve heard flush systems cost more than cable scrapers, is this true? No. When all cost are considered flush systems are usually the least costly method to provide total cleanup for the dairy. Even when compared to tractor scraping, flushing will be less expensive within two to three years of start-up. Will a Flush System use more water than a scrape system? Yes, in most instances additional water is reuired. In many instances 75% of the reuired water is already being generated in the parlor. Recycling and other measures can minimize additional water reuirements as well. If field application of wastes must be by a tanker wagon over long distances flushing may not be appropriate. Do I need a separate air compressor for the Flush Valves? Typically no. If you have air operated parlor euipment the flush valves can use this air system and should be less than 10% of the total usage. It is recommended air be taken off prior to any in line oilers. Can a single set of valves be used to clean both my parlor and holding pen? Yes. There are numerous layouts that work well including sloping the floors all one way or rotatable valves with a double slope arrangement. Agpro can provide specific help with your layout. Will flushing work with sand bedding? Yes, in fact it is one of the best systems when dealing with sand laden manure. The SF16x24 Sand Handler valves are specifically designed for sand situations. Lanes should be 2% or steeper and less than 750 long. Ask for help with special layout features to aide in moving sand. Agpro Inc., Rt. 7 Box 100, Paris, TX USA (903) * Fax (903) * agpro@neto.com
4 FLUSH VALVES Agpro offers over 20 different flush valve models. The following are our most popular. Let our design staff review your system and recommend the proper valves for your specific layout. SF12 x lbs. 6,200 gpm Specific Features: Pop-Up Lid 12 Inlet Hot Dip Galvanized Finish Most Popular Model Gravity systems with up to 32 system head, for lanes up to 14 wide and 800 long. Ideal in parlors, holding pens, freestall barns, feed lanes and transfer lanes. Flush valve shall be bolt-on design, flush mount with adjoining concrete floors when not in use. During flushing, the discharge bonnet will pop-up approximately 5 inches for normal directional discharge. Pneumatic operation shall be via linkage free air pillow type activator working a.250 plate and.500 rubber seal. Design shall allow sealing at static heads up to 40 feet. Inlet port shall be 12 nominal with internal flange connection. Discharge shall be trapezoidal shape 20 wide at outlet. Unit shall include body drain and sealable conduit port for air supply. Four lugs shall be provided to assure proper mounting. Construction shall be of heavy steel with hot dipped galvanized finish on all surfaces after fabrication. SF16 x lbs. 8,000 gpm Specific Features Pop-Up Lid 16 Inlet Hot Dip Galvanized Finish Sand Handler Design Gravity systems with up to 40 of system head in locations where splash is not a concern, 30 otherwise, for lanes up to 16 wide and 1,600 long. Ideal for long or wide lanes in housing, feeding and transfer situations. Best valve in sand removal applications. Flush valve shall be bolt-on design, flush mount with adjoining concrete floors when not in use. During flushing, the discharge bonnet will pop-up approximately 6 inches for normal directional discharge. Pneumatic operation shall be via linkage free air pillow type activator working a.375 plate and.500 rubber seal. Design shall allow sealing at static heads up to 48 feet. Inlet port shall be 16 nominal with internal flange connection. Discharge shall be trapezoidal shape 24 wide at outlet. Unit shall include body drain and sealable conduit port for air supply. Four lugs shall be provided to assure proper mounting. Construction shall be of heavy steel with hot dipped galvanized finish on all surfaces after fabrication.
5 SF12 x 18R lbs. 6,000 gpm Specific Features Pop-Up Lid 12 Inlet Hot Dip Galvanized Finish Rotatable Discharge Outlet Flush valve shall be bolt-on design and flush mount with adjoining concrete floors when not in use. Removable handle will permit the pre-flush selection and positioning of discharge direction. During flushing, the discharge bonnet will pop-up approximately 5 for normal directional discharge. Pneumatic operation shall be via linkage free air pillow type activator working a.375 plate and.500 rubber seal. Design shall allow for sealing at static heads up to 40. Inlet port shall be 12 nominal. Discharge shall be 18 diameter with rotatable discharge lid. Mount shall be with an external standard 12 flange. Unit shall include body drain and sealable conduit port for air supply. Four lugs shall be provided to assure proper mounting. Construction shall be of steel with hot dipped galvanized finish on all surfaces after fabrication. SF12 x 22M lbs. 5,500 gpm Specific Features: Manual Operation (No air) 12 Inlet Hot Dip Galvanized Finish Patented Design Uniue rotatable lid makes this valve ideal for areas where occasional flushing is desired in more than one direction or compound slope areas where adjustment of flow direction may be reuired. System heads up to 32. Lanes up to 14 wide and 700 long. Gravity or pump systems with up to 28 of system head. Manual operation without air makes this valve ideal for infreuent use areas long distances from an air source. Suited for lanes up to 14 wide and 700 long. Best for lanes with limited vehicle access due to surface mount reuirements. Low profile and removable handle permits normal vehicle traffic over valve positioned at or near center of lane. Flush valve shall be bolt-on design and mount on adjoining concrete floors. During flushing, the body will provide for normal directional discharge. Mount height shall be less than 10 above floor. Manual operation shall be via overcenter pivot with HDP roller type activator working a.375 plate and.500 rubber seal reuiring less than 100 lbs. force for closing. Operator linkage shall be removable for service. Design shall allow for sealing at static heads up to 32. Inlet port shall be 12 nominal. Discharge shall be 22 wide. Mount shall be with an internal standard 12 flange. Construction shall be of steel with hot dipped galvanized finish on all surfaces after fabrication. PF12 x 18R-L lbs. 3,000 gpm Specific Features: Louvered Lid Design 12 Inlet All Stainless Steel Construction Slip mount shown. Bolt-on configuration available. Pump flush systems with up to 12 of system head. Louvered drive over lid allows unobstructed access. Ideal for pump flush applications with lanes up to 16 wide and 1,600 long. Flush valves shall be flush mount with adjoining concrete floors. During flushing, the louvered discharge lid will allow for normal directional discharge. Pneumatic operation shall be via linkage free air pillow type activator working a.250 plate and.500 rubber seal. Inlet port shall be 12 nominal. Discharge shall be 18 diameter with positionable louvered discharge lid. Unit shall include sealable conduit port for air supply. Four lugs shall be provided to assure proper mounting. Construction shall be of all 304 stainless steel. Agpro Inc., Rt. 7 Box 100, Paris, TX USA (903) * Fax (903) * agpro@neto.com
6 SCHEMATIC Typical Gravity Flush System Typical Pump Flush System
7 All Agpro valves are designed for ease of installation as well as long term, trouble free service. FLUSH VALVES Reservoirs such as these typically supply gravity flush systems. Flushing in action. High volume pump used to supply a pump flush system. Agpro Inc., Rt. 7 Box 100, Paris, TX USA (903) * Fax (903) * agpro@neto.com
8 FLUSH ACCESSORIES Agpro offers a complementary line of accessories to complete any flush system. All steel tank fixtures to readily adapt PVC piping to steel reservoirs. Flush Supply Line Butterfly Valves: To permit partial shutdown of system for maintenance, service, etc. Flange Kits: Pre-packaged PVC flanges with reuired gaskets and attachment hardware. Air Controls: All types of air controllers from simple manually actuated units to fully automated system controls. Supply Headers and Tees: All steel fabrication header pipes and tees to replace PVC pipes and fittings. Simplify installation and minimize potential below slab leaks. Complete line of specialized collection channel covers, pumps and separators. Pressure rated PVC piping and fittings. Installation Assistance. Rt. 7 Box 100 Paris, TX USA Toll Free (800) (903) * Fax (903) * agpro@neto.com
HORIZONTAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Low Ceilings UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationFireLock NXT Dry Valve. System No. Submitted By Spec Sect Para Location Date Approved Date
The patent-pending Victaulic Series 768 FireLock NXT is a low differential, latched clapper valve that uses a unique direct acting diaphragm to separate system water supplies from dry-pipe sprinkler systems.
More informationVERTICAL BLADDER TANK
Balanced Pressure Proportioning System Reliable Foam System Requiring Only Water Power Perfect For Tight Spaces UL Listed, ASME, National Board Registered Bladder-UL162 Approved, High Tensile Pressure
More informationTECHNICAL DATA. TRIMPAC Model B-5 & B-5B
September 16, 2013 Trimpac 250a 1. DESCRIPTION DEsCRIPTIoN is a factory assembled trim package for a ed an electric/pneumatic release module in a metal enclosure. The standard trim normally required on
More informationTECHNICAL DATA. Trimpac 257a. September 16, 2013
September 16, 2013 Trimpac 257a 1. DESCrIpTION DESCRIPTION The Viking Double SUREFIRE SIngle Interlock Preaction TRIMPAC Model D-2 and D-2B used with either a Model E or F Deluge Valve (A.1), a Viking
More informationTECHNICAL DATA. Trimpac 256a. October 31, 2013
October 31, 2013 Trimpac 256a 1. DESCRIPTION The Viking SUREFIRE SIngle Interlock Preaction TRIMPAC Model D-1 and D- 1B used with either a Model E or F Deluge Valve (A.1), a Viking Easy Riser check valve
More informationPTF4 Pivotrol Pump (patented) version Dual Mechanism - Pressure Powered Pump
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationProduct Manual B-Safety ClassicLine & PremiumLine Emergency Eyewash and Eye/Face Wash Equipment
Product Manual B-Safety ClassicLine & PremiumLine Emergency Eyewash and Eye/Face Wash Equipment 1. Application Emergency eyewash and eye/face wash equipment are prescribed first aid installations for workplaces
More informationAWWA C504 COMPLIANT VALVES FROM 3 THRU 108
AWWA C504 COMPLIANT VALVES FROM 3 THRU 108 PO Box 411 Berwick PA 18603 800-247-VALV www.crispinvalve.com 500 SERIES: Sizes 3-20 Available The K-Flo 500 Series is a heavy-duty resilient seated butterfly
More informationTECHNICAL DATA. Q = C v P S
Page 1 of 13 1. DESCRIPTION The Viking 6 Model G-6000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry sprinkler
More information22. Specialty Valves.
22. Specialty Valves. a. Types of Specialty Valves. 1) Use of the following specialty valves is covered in this section: Altitude Valve, Pressure Reducing Valve, Pressure Relief Valve, Swing Check Valve,
More informationCOLD WATER STORAGE CONTROL AYLESBURY DELAYED ACTION FLOAT-ACTIVATED VALVES
COLD WATER STORAGE CONTROL AYLESBURY TM DELAYED ACTION FLOAT-ACTIVATED VALVES Keraflo have manufactured top quality, delayed action float valves in the UK for over 30 years. The Aylesbury TM range is synonymous
More informationAUTOMATED PNEUMATIC TANKER HATCH
AUTOMATED PNEUMATIC TANKER HATCH http://hmtechno.com/our-products/pivotal-edge/ Pivotal Edge Automated manhole cover for pneumatic tankers Pivotal Edge have developed automated hatches that operate remotely,
More informationETL listed for installations within 5 ft. (1.5M) of outer edge of water
Fiberstars Light Streams Mini Laminar Installation Manual (LSML) 3072091 ETL listed for installations within 5 ft. (1.5M) of outer edge of water 79-15056-00 Rev. A Page 1 of 6 SAVE THESE INSTRUCTIONS!
More informationFeatures. Model DDX-LP Dry Pipe Valve System 4 (100mm), 6 (150mm) & 165mm Sizes
Bulletin 357 Rev. E Model DDX-LP Dry Pipe Valve System 4 (100mm), 6 (150mm) & 165mm Sizes Bulletin 357 Rev. E Features 1. 2. 3. 4. 5. 6. 7. 8. 9. Differential-type valve, lightweight, dependable construction.
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 331a 1. Description Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilize the Viking G-3000P Valve. The small profile, lightweight, pilot-operated
More informationKlassikDrain Section. Technical Handbook and Product Catalog. General purpose trench drainage
Technical Handbook and Product Catalog Surface Drainage 6 Surface drainage options 8 Product selection 10 Trench drain hydraulics 16 Loadings 22 Material data 24 End user requirements Standard Products
More informationTECHNICAL DATA. Trimpac 244a. September 16, 2013
September 16, 2013 Trimpac 244a 1. DEsCrIpTION DESCRIPTION TRIMPAC Model B-1 and B-1B is a factory-assembled trim package with an electric release module in a metal enclosure. The standard trim normally
More informationAutoDrill s OUTSTANDING FEATURES
PRODUCTION DRILLING & TAPPING SOLUTIONS Reduce Your Costs and Increase Your Production The Affordable, Powerful, Compact Solution AutoDrill s OUTSTANDING FEATURES Self Feeding with Air or Oil Thrust Capacity
More informationTECHNICAL DATA 3 MODEL G-3000 DRY VALVE RISER ASSEMBLY
Page 1 of 13 1. DESCRIPTION The Viking 3 Model G-3000 Dry Valve Riser Assembly is equipped with a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry
More informationTECHNICAL DATA. Q= Cv S
Page 1 of 13 1. DESCRIPTION The Viking 4 inch Model G-4000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry
More informationAFL Industries, 1101 West 13 th St, Riviera Beach, FL 33404 PHONE: (561) 848-1826 FAX: (561) 848-9454 E-Mail: Sales@aflindustries.com AFL-STD MODEL OSV-4 SS INSTALLATION, OPERATION & MAINTENANCE BROCHURE
More informationTECHNICAL DATA Q = C. v P S. 2 Model G-2000 Dry valve. Page 1 of 13
Page 1 of 13 1. Description The Viking 2 Model G-2000 Dry Valve Riser Assembly consists of a small profile, light weight, pilot operated valve that is used to separate the water supply from the dry sprinkler
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 347a 1. Description Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilize the Viking G-6000P Valve. The small profile, lightweight, pilot operated
More informationOPERATING MANUAL. Contents. Bottom outlet ball valve Type ecoline
OPERATING MANUAL Bottom outlet ball valve Type ecoline Contents 1 General Information 2 Safety 3 Packing, Handling, Storing 4 Product description 5 Preparation, Assembly 6 Commissioning 7 Handling 8 Attendance
More informationLAKOS Waterworks. PWC Series Sand Separators. Installation & Operation Manual LS-829 (10/12)
LAKOS Waterworks PWC Series Sand Separators Installation & Operation Manual LS-829 (10/12) Table of Contents Separator Operation... 3 Individual Model Details.... 4 Flow vs. Pressure Loss Chart 4 Installation
More informationTECHNICAL DATA. Page 1 of 12
Page 1 of 12 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking Model H or J Flow Control
More informationAT SERIES. Dart Valve Actuator. Thrusts up to 55,000 lbs SIL-3 Capable GT3 Triple Seal Gland for Severe Service Applications
Actuation Solutions and Systems for the World s Most Challenging Environments AT SERIES Dart Valve Actuator Durable, Accurate, Compact, Modular Thrusts up to 55,000 lbs SIL-3 Capable GT3 Triple Seal Gland
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 348a 1. Description Viking supervised Surefire Preaction Systems utilize the Viking G-6000P Valve. The small profile, lightweight, pilot operated Viking G-6000P Valve comes complete
More informationAIR-SAVER G1 AIR-SAVER G2 LOCATOR-EV COMPRESSED AIR CONDENSATE MANAGEMENT AND ENERGY SAVING PRODUCTS AIR SAVING PRODUCTS
AIR-SAVER G1 AIR-SAVER G2 LOCATOR-EV ENVIRONMENT ADDING VALUE SAFEGUARD RELIABLE COMPRESSED AIR CONDENSATE MANAGEMENT AND ENERGY SAVING PRODUCTS AIR SAVING PRODUCTS Air saving products INDEX Chapter Content
More informationTECHNICAL DATA. Q = C v P S
January 6, 2012 Preaction 333a 1. Description Viking supervised Surefire Preaction Systems Utilize the Viking G-3000P Valve. The small profile, lightweight, pilot-operated Viking G-3000P Valve comes complete
More informationSABERINDO PACIF SABERINDO PACIFIC CIFIC SABERINDO PA. A Tyco International Company
CIF A Tyco International Company 1 Foam Concentrate CIF 3% AFFF -UL Listed -UL Canada Listed 6% AFFF 6 parts AFFF concentrate to 94 parts water -UL Listed- Foam Liquid -UL Canada Listed 3% FLUOROPROTEIN
More informationBLAST-IT-ALL. TOLL FREE: (800)
BLAST-IT-ALL TOLL FREE: (800) 535-2612 sales@blast-it-all.com www.blast-it-all.com BLAST-IT-ALL TOLL FREE: (800) 535-2612 sales@blast-it-all.com www.blast-it-all.com MICROVALVE The MicroValve gives you
More informationModel DDX-LP Dry Pipe Valve System 8 (200mm) Features. Differential latching clapper-type, lighweight, dependable construction.
Bulletin 335 Model DDX-LP Dry Pipe Valve System 8 (200mm) Bulletin 335 Features 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. Differential latching clapper-type, lighweight, dependable construction. Low Air Pressurized
More informationOVERVIEW pg 3. Major Points to Consider pg 3 Minor Points to Consider pg 3. INSTRUCTIONS pg 4
TABLE OF CONTENTS OVERVIEW pg 3 Major Points to Consider pg 3 Minor Points to Consider pg 3 INSTRUCTIONS pg 4 How Does Nordic Freeze Work pg 4 How Long Will the Ice Plug Take to Form pg 4 How Do I Know
More informationData Sheet Issue A
Features 1. Differential latching clappertype, lighweight, dependable construction. 2. Low Air Pressurized System, 8 psi -to- 26 psi (0,6 bar to- 1,8 bar) 3. Reset externally. Cover removal is not required.
More informationFeatures. Model EX Low Pressure Dry Pipe Valve System 2 (DN50), 2½ (DN65), 3 (DN80), 76 mm, 4 (DN100 ), 6 (DN150), 165 mm & 8 (DN200)
Features 1. Differential latching clapper-type, lightweight, dependable construction. 2. Low Air Pressurized System, psi -to- 2 psi (0,6 bar -to- 1,9 bar) Max 3. Reset externally. Cover removal is not
More informationCSO/STORMWATER MANAGEMENT. HYDROVEX FluidMoon Self-Adjusting Knife-Gate Regulator
CSO/STORMWATER MANAGEMENT HYDROVEX FluidMoon Self-Adjusting Knife-Gate Regulator HYDROVEX FLUIDMOON SELF-ADJUSTING KNIFE-GATE REGULATOR APPLICATION The Hydrovex FluidMoon Self-Adjusting Knife-Gate Regulator
More informationIntroduction to Pneumatics
Introduction to Pneumatics Pneumatics Symbols Air generation and distribution Table 1: Symbols use in energy conversion and preparation ITEM SYMBOL MEANING Compressor SUPPLY Pressure Source Pneumatic Pressure
More informationIrrigation System Winterization and Pressurization Procedures
Irrigation System Winterization and Pressurization Procedures Introduction Any time that an irrigation system is filled and pressurized, or when the system is drained and water flushed from the system,
More informationTECHNICAL DATA. Trimpac 251a. Spetember 16, 2013
Spetember 16, 2013 Trimpac 251a 1. DEsCrIpTION DESCRIPTION TRIMPAC Model B-6 and B-6B is a factory assembled trim package for a double interlocked preaction system with an electric/pneu-lectric release
More informationAIR SAVING PRODUCTS ADDING VALUE AIR-SAVER LOCATOR LOCATOR-EV
AIR SAVING PRODUCTS AIR-SAVER LOCATOR LOCATOR-EV ADDING VALUE REL LIABLE COMPRESSED AIR CONDENSATE MANAGEMENT AND ENERGY SAVING PRODUCTS Air saving products INDEX Chapter Content 1 Introduction to compressed
More informationPump On Demand. Skimmer System
Pump On Demand Skimmer System POD (Pump on Demand) Skimmer System Application Out-of-the-box LNAPL recovery in 2-inch and larger-diameter wells. The POD Skimmer model TR-610 recovers light-end hydrocarbons
More informationSanitizers. Sanitizers. Sanitizers for Pools & Spas
for Pools & Spas 207 IntelliChlor Salt Chlorinator Featured Highlights IntelliChlor Salt Chlorinator IntelliChlor Salt Chlorinator uses common table salt to produce all the chlorine a pool needs, safely,
More informationInflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer
Inflatable Packer Single & Double Single & Double Packer Dimension Wireline Packer Water Testing Packer (WTP) Packer Packer Working Pressure & Depth Chart Packer Water Hand Pump Packer Air Driven Pump
More informationTECHNICAL DATA. Pressure Regulation 531a. April 24, 2009
April 24, 29 Pressure Regulation 531a 1. DESCRIPTION The Viking Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking
More informationAir Amplifiers & SYSTEMS
Air Amplifiers & SYSTEMS We Accept VISA, MasterCard and American Express Air Amplifiers Point-of-Use Air Solutions Maximator air amplifiers are designed to boost plant air pressure or increase the supply
More informationDESIGN AND PRE - INSTALLATION INFORMATION
DESIGN AND PRE - INSTALLATION INFORMATION Installation of valves should be in accordance with The Water Supply (Water Fittings) Regulations 1999 and BS6700:1997 Para. 2.2.4 KP Type Valves offer a flexible
More informationMarschalk Model # 94000
Marschalk Model # 94000 12-volt DC Portable oil-less Air Compressor Operation Manual 27250006 REV 1 9/13/05 Table of Contents CHAPTER 1: SYSTEM DESCRIPTION... 5 FUNCTION AND THEORY... 5 SYSTEM COMPONENTS...
More informationDS06D,G Dial Set Pressure Regulating Valve
DS06D,G Dial Set Pressure Regulating Valve PRODUCT DATA FEATURES APPLICATION Built-in, factory-calibrated outlet pressure adjustment dial. Noncorroding unitized cartridge contains all working parts and
More informationType 1367 High-Pressure Instrument Supply System with Overpressure Protection
Instruction Manual D100343X012 Type 1367 November 2017 Type 1367 High-Pressure Instrument Supply System with Overpressure Protection TYPE 252 FILTER 2ND-STAGE TYPE 67CF FILTER-STYLE REGULATOR INLET TYPE
More informationGRAVITY FLOW DILUTE PHASE PNEUMATIC CONVEYING DENSE PHASE PNEUMATIC CONVEYING ORIFICE GATE. Handles powders, granules and pellets
The Vortex Quantum Orifice Gate is specifically engineered to handle dry bulk solids in gravity flow, dilute phase, or vacuum conveying systems with pressures up to 15 psig (1 barg). Traditional slide
More informationFiber Optic Lighted Bubbler Spillway Pot (DLP-45) Installation Manual
Fiber Optic Lighted Bubbler Spillway Pot (DLP-45) Installation Manual 27.75 23.75 25.50 20.75 Specifications: 8-13 GPM 100 strand fiber - Bubbler 75 strand fiber - Spillway Light Bar 45 ft. fiber tail
More informationSanitizers. Sanitizers. Sanitizers for Pools & Spas
Sanitizers Sanitizers for Pools & Spas 213 213 IntelliChlor Salt Chlorinator Featured Highlights IntelliChlor Salt Chlorinator IntelliChlor Salt Chlorinator uses common table salt to produce all the chlorine
More informationTECHNICAL DATA CAUTION
Page 1 of 12 1. DESCRIPTION The Viking Model C-2 Pilot Pressure Regulating Valve is a direct-acting, single-seated, spring-loaded diaphragm valve. When installed as a pilot regulating valve on a Viking
More informationBUTTERFLY VALVES. Toll Free (877) - ICFLUID -2-
BUTTERFLY VALVES 1. General HyrdoWer is a globally recognized manufacturer of power unit accessories. They have become specialists in the design of Butterfly Valves and Hydraulic Compensators. The shut
More informationUnit 24: Applications of Pneumatics and Hydraulics
Unit 24: Applications of Pneumatics and Hydraulics Unit code: J/601/1496 QCF level: 4 Credit value: 15 OUTCOME 2 TUTORIAL 9 ACCUMULATORS The material needed for outcome 2 is very extensive so there are
More informationTECHNICAL ACCESSORIES
A.R.I. VALVES S-050P AIR PLASTIC RELEASE 16 BAR Automatic Component A.R.I patent, Rolling Seal Mechanism: Dramatically reduces the possibility of obstruction by debris. Discharges high air flow rates upto
More informationWHEATLEY WHEATLEY SERIES 500 SWING CHECK VALVE. Installation, Operation and Maintenance Manual
WHEATLEY SERIES 500 SWING CHECK VALVE STANDARD INTEGRAL SEAT & OPTIONAL REMOVABLE SEAT 2" FP - 6" FP 150# - 1500# 8" FP - 12" FP 150# - 900# API 6D and B16.34 2" FP - 4" FP 5000# DRILLING PRODUCTION VALVE
More information1) INTRODUCTION 2) THE UNFAIR ADVANTAGE
1 1) INTRODUCTION 2) THE UNFAIR ADVANTAGE and Stingray earth anchors are driven tipping plate soil anchors for reaction of tensile loads. anchors have ultimate capacities up to 20 tons, and Stingray anchors
More informationKTM OM-2 SPLIT BODY FLOATING BALL VALVES INSTALLATION AND MAINTENANCE INSTRUCTIONS
Before installation these instructions must be fully read and understood SECTION 1 - STORAGE 1.1 Preparation and preservation for storage All valves should be properly packed in order to protect the parts
More informationVacutrans Instructions
Vacutrans Instructions EMPIRE ABRASIVE EQUIPMENT COMPANY 2101West Cabot Blvd. Langhorne, Pa 19047 215-752-8800, FAX 215-752-9373 Web Site: www.empire-airblast.com ASSEMBLY DETAIL Your Vacutrans unit has
More informationDesiccant Air Breathers DBE. Section 3: TNK SCHROEDER INDUSTRIES ACCESSORIES 21
Desiccant Air Breathers DBE Section 3: SCHROEDER INDUSTRIES ACCESSORIES 21 Reservoir Accessories A hydraulic systems reservoir can play a significant role in the ingression of contamination into the system.
More informationHomestead Series 820 AWWA Butterfly Valves
Homestead Series 820 AWWA Butterfly Valves Dependable Valves for Water & Wastewater Service BODY: The ductile iron body meets or exceeds the design strength requirements of the AWWA C504 standards. Flange
More informationAir Operated Hydraulic Pumping Systems to 50,000 psi
High Pressure Equipment Air Operated Hydraulic Pumping Systems to 50,000 psi PS-10: 10,000 psi PS-20: 20,000 psi PS-30: 30,000 psi PS-40: 40,000 psi PS-50: 50,000 psi PS-90: 90,000 psi High Pressure air
More informationmy SYSTEM A guide to common applications in water distribution systems
my SYSTEM A guide to common applications in water distribution systems WWW.SINGERVALVE.COM INDEX This short guide is intended to offer guidance on some of the common problems, applications and questions
More informationFeatures. Model DDX-LP Dry Pipe Valve System 2 (50 mm), 2½ (65 mm), 3 (80 mm), 76 mm, 4 (100 mm), 6 (150 mm), 165 mm & 8 (200mm) Listings & Approvals
Bulletin 337 Rev. A Model DDX-LP Dry Pipe Valve System 2 (50 mm), 2½ (65 mm), 3 (0 mm), 76 mm, 4 (100 mm), 6 (150 mm), 5 mm & (200mm) Bulletin 337 Rev. A Features 1. Differential latching clapper-type,
More informationTECHNICAL DATA. Trimpac 247a_Euro. September 16, 2013
September 16, 2013 Trimpac 247a_Euro 1. DESCRIPTION DEsCrIpTIoN TRIMPAC Model B-11 LPCB Type 1 is a factory assembled trim package for a single interlocked electric release module in a metal enclosure.
More informationPressure Compensating (PC) Spray Stakes
N E T A F I M U S A Pressure Compensating (PC) Spray Stakes Automated Watering Systems for Large Container Production Improve Plant Quality and Conserve Resources 1 or More Good Reasons to Choose Netafim
More informationPressure and/or Temperature Pilot Operated Steam Regulators Series 2000
Hoffman Specialty Regulators Regulators Pressure and/or Temperature Operated Regulators Series 2000 The Hoffman Specialty Series 2000 consists of main valves, pilot valves, wells and hardware kits. They
More information42045 Heavy Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor Only) Heavy Duty ADA Base Model Kit: 110/145 PSI (ADA Compressor Only)
42045 Heavy Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor Only) 42047 Heavy Duty ADA Base Model Kit: 110/145 PSI (ADA Compressor Only) 45052 Constant Duty ADA Base Model Kit: 85/105 PSI (ADA Compressor
More informationFull Range Pressure Compensating Variable Flow Control
Engineering & Manufacturing Solutions Specifications: See flow chart for capacity. Rated for 3000 psi (207 bar). Weighs 7- ¾ lbs. (3.52 kg). 30-Micron Filtration Recommended. Torque to turn side lever
More informationCHE Well Testing Package/Service:
CHE Well Testing Package/Service: CHE delivers well testing package And services, trailer mounted well testing package and offshore/onshore well testing services with over 10 years experience. Our testing
More informationROTATING DISK VALVES INSTALLATION AND MAINTENANCE 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6
Sub Section INDEX Page Number 1. SCOPE 3 2. INFORMATION ON USAGE 3 3. VALVE TYPES 3 4. OPERATORS 5 5. VALVE CONSTRUCTION 6 6. INSTALLATION AND OPERATION 6 7. MAINTENANCE 8 8. REPAIR 9 9. ASSEMBLY 10 10.
More informationVertical and Horizontal Bladder Tanks
DATA SHEET Vertical and Horizontal Tanks Application The ANSUL bladder tank is one component in a balanced pressure proportioning system. Its operation requires no external power other than a pressurized
More informationTECHNICAL DATA. Low-Flow Foam Preaction System with Hydraulically Actuated Concentrate Control Valve.
Foam 302 a 1. DESCRIPTION (Refer to Figure 1 on page 302 e.) The Viking Low-Flow Foam/Water Proportioning System is a UL Listed and FM Approved system, for use with 3M and Viking brand foam concentrate.
More informationPrecision Rotary Airlocks and Diverter Valves
Precision Rotary Airlocks and Diverter Valves Utilizing over 40 Years of Mac Process Bulk Material Conveying Technology Airlocks and Diverters Schenck Process offers a wide range of airlocks and diverter
More informationMeribah Ram Pump. MERIBAH RAM PUMP Installation & User Manual
Meribah Ram Pump German Technology MERIBAH RAM PUMP Installation & User Manual Models: MRP / MSFRP / MPFRP Pumping Water without common power sources like electricity or gasoline No Running Costs Very
More informationSeries 58 SAFETY VALVES 312
312 Series ASME AIR BRASS SAFETY SOLUTION FEATURES AND BENEFITS High quality, corrosion-resistant safety valves Optimum high flow discharge rates CRN OG-3724 S Manufactured under the regulations of the
More informationTECHNICAL DATA. Q = C v P S
Preaction 346a 1. Description The 6 Model G-6000P Electric Release Preaction System Riser Assembly can be used as a Single Interlock Preaction System with Electric Release, or as a Double Interlock Preaction
More informationTable of Contents. We also carry a wide range of supplemental products for splash pad systems and pools.
Table of Contents WATER UMBRELLA 4 WATER MUSHROOM (40 ) 5 WATER MUSHROOM (30 ) 6 FLOWER SHOWER - 1 7 FLOWER SHOWER - 2 8 FLOWER SHOWER - 3 9 FLOWER SHOWER - 4 10 FIRE HYDRANT SOAKER 11 RAIN STICK 12 RAINY
More informationDUPLEX TECHNICAL INFORMATION FABRICATED DUPLEX STRAINERS
DUPLEX STRAINER TECHNICAL INFORMATION - 119 - SCREEN OPENINGS 100 Mesh - 30% O.A. 0.006 Openings 80 Mesh - 36% O.A. 0.008 Openings 60 Mesh - 38% O.A. 0.010 Openings 40 Mesh - 41% O.A. 0.016 Openings 30
More informationOperating Instructions Models and Hydrostatic Test Pumps
Operating Instructions Models 33100 and 33101 Hydrostatic Test Pumps 33100 DIMENSIONS: WEIGHT: PUMP: MOTOR: CONTROL: GAUGE: DISCHARGE HOSE: 16 (40cm) L x 22 (55cm) W x 18 (45cm) H 87 lbs., 39.5 kg Triplex
More informationPneumatic Hand Pumps with no Gauge Connection (scissor handle) AP0V (300 psi / 20 bar)
Pneumatic Hand Pumps with no Gauge Connection (scissor handle) AP0V (300 psi / 20 bar) The quickest and most economical way to perform pneumatic field pressure calibrations on pressure transmitters, switches
More informationLAZY RIVER 3 3 PUMP LOCATION
.0 1 TEE WITH () " RETURN NOZZLE 1 1.0 10" OR 1 SCH 0 PVC PIPE RETURN WITH ACCELERATOR NOZZLE 2 LAZY RIVER PUMP LOCATION PUMP LOCATION PRELIMINARY SITE LAYOUT AND PUMP LOCATION 1 DETERMINE CURRENT RETURN
More informationPumpAgents.com - Click here for Pricing/Ordering Nominal psi (bar) Cut-In Cut-Out
PumpAgents.com - Click here for Pricing/Ordering Model 31670-Series Dual Max 7.5 GPM (28 LPM) AUTOMATIC TWO STAGE WATER SYSTEM WITH ACCUMULATOR TANK AND PUMPGARD STRAINER IDEAL FOR PLEASURE AND COMMERCIAL
More information94060 FRP Conservation Vent. Features. FRP Conservation Vent. One piece construction prevents product leakage
94060 The Shand & Jurs model 94060 Conservation Vent is constructed of Fiberglass Reinforced Plastic (FRP). It has been designed for superior corrosion resistance in oxidizing environments. The 94060 is
More informationCOLD WATER STORAGE CONTROL AYLESBURY TM FLOAT VALVE RANGE
COLD WATER STORAGE CONTROL AYLESBURY TM FLOAT VALVE RANGE Keraflo have manufactured top quality, delayed action float valves in the UK for over 30 years. The Aylesbury TM range is synonymous with float
More information94060 FRP Conservation Vent. Features. FRP Conservation Vent. One piece construction prevents product leakage
94060 The Shand & Jurs model 94060 Conservation Vent is constructed of Fiberglass Reinforced Plastic (FRP). It has been designed for superior corrosion resistance in oxidizing environments. The 94060 is
More informationChapter 14 Water Shuttle Operations
1. Which of the following statements about water shuttle operations is TRUE? A. Water shuttle operations may create a dramatic hose failure B. Water shuttle operations are safer than relay pumping operations
More informationManual Actuated Boiler Blowdown Valves
Manual Actuated Boiler Blowdown Valves Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Operation 5. Maintenance 6. Spare parts p.1 1. Safety
More informationHD 9/18-4 ST. Adaptation according to requirements thanks to retrofitting capability. Individual configurability saves investment costs
The space-saving stationary high-pressure cleaners from Kärcher with up to 6 supply points can be individually configured according to requirements and impress with low wear and tear. 1 2 3 4 1 2 Adaptation
More informationKnife Gate and Slurry Valves Overview. Flow Control
Knife Gate and Slurry Valves Overview Flow Control Tyco Knife Gate and Slurry Valves The combining of Clarkson, L&M Valve and Rovalve products under Tyco Valves & Controls gives you the widest selection
More informationInstallation, Operation, and Maintenance Manual
Installation, Operation, and Maintenance Manual Welker Instrument Supply Pressure System Model WIC The information in this manual has been carefully checked for accuracy and is intended to be used as a
More informationEnglish. Introduction. Safety Instructions. All Products. Inspection and Maintenance Schedules. Parts Ordering. Specifications WARNING WARNING
Contents All Products... Gb-1 Control Valves... Gb-2 Control Valve Actuators... Gb-3 Regulators... Gb-3 Relief Valves... Gb-4 Instruments, Switches, and Accessories... Gb-4 Products Covered by Battery
More informationFluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS
Fluid Dispensing Systems H O S E R E E L S H O S E S HOSE REELS HOSE REELS SIGNATURE SERIES H O S E S R E E L S FEATURES & BENEFITS Eight position locking precision die cast latch mechanism, with secure
More informationCOUNTER CURRENT UNIT. Instruction Manual
COUNTER CURRENT UNIT Instruction Manual 1 Introduction: Congratulations on your purchase of a new Certikin counter current swimming unit. This unit has been developed and built by qualified personnel especially
More informationMiniMag. 1 of 8. The MiniMag scrubber s 2 recover drain are 80% larger than a 1.5, making the MiniMag scrubber s drain hose less likely to clog.
MiniMag Scrubber tank doesn t bolt to the frame, and so is less likely to be damaged or risk to stripped out inserts. The heavy duty and thick walled poly tank, pivots on smooth bosses. The MiniMag scrubber
More informationTECHNICAL DATA OBSOLETE
April 9, 2009 Preaction 326a 1. DESCRIPTION Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilizing the Viking G-4000P Deluge Valve. The small profi le, lightweight,
More informationApollo Standard Port, Full Port & One Piece Flanged Ball Valves Installation, Operation, & Maintenance Manual
I854000.D Apollo Standard Port, Full Port & One Piece Flanged Ball Valves Installation, Operation, & Maintenance Manual Introduction This manual presents guidelines for the Installation, Operation and
More information