Dangerous Occurrence: Collapse of mobile crane
|
|
- Donna Riley
- 5 years ago
- Views:
Transcription
1 Accident Case Studies Dangerous Occurrence: Collapse of mobile crane Crane Operator had hoisted up a bag of sand (780 Kg) over the rooftop. While doing so, the Overload Radius Indicator (ORI) alarm sounded and the cut-off was activated by Operator. However, he by-passed the cut-off and continued to lower the boom of the crane, based on his years of experience. The crane suddenly toppled when he started to swing the boom to its left. 1
2 Factors Contributing To Collapse Site constraints. No lifting plan. No risk assessment conducted. No Permit-To-Work system Implemented. Outriggers not fully extended. By-passed of safety devices. Operator at-risk behaviours. Safe Working Load exceeded. Lifting Supervisor, Rigger and Signalman were not appointed & not present on-site. How to prevent the accident? It is important: personnel involved in the lifting operations are aware of the factors and know what to focus. 2
3 Factors Affecting Safe Lifting Operation Machine? Medium? Material? Method? Man? Factors Affecting Safe Lifting Operation Many factors affect the lifting operation. Broadly, they can be classified into the followings: Machine lifting equipment for the job as well as the integrity of the lifting equipment to perform the job; Material the load that is intended to be lifted; Medium the environment in which the lifting operation is to be carried out; Man the competency, roles and responsibilities of personnel involved in the lifting operations; and Method the planning and procedures to be adopted for the lifting operation i.e. lifting plan. 3
4 Cause & Effect Analysis Diagram USES OF CAUSE & EFFECT DIAGRAM To study all possible reasons for a process that is not producing the desired results To study all possible causes to a problem To identify areas for data collection for more in-depth analysis of the problem To determine the root cause(s) of a problem Cause & Effect Analysis MAN METHOD MEDIUM Take no Responsibility Human error Poor Communication Lack of supervision Inadequate Knowledge No Risk Assessment No lifting plan No safe work procedure Inclement weather Poor ground condition Site Constraints Effect: Collapse of Crane Load weight not ascertain Misuse Inadequate servicing MATERIAL No rigging point MACHINE Outriggers not fully extended To study all possible causes and identify areas for data collection for more in-depth analysis of the problem 4
5 Cause & Effect Analysis MAN METHOD MEDIUM Take no Responsibility Human error Poor Communication Lack of supervision Inadequate Knowledge No Risk Assessment No lifting plan No safe work procedure Inclement weather Poor ground condition Site Constraints Effect: Collapse of Crane Load weight not ascertain Misuse Inadequate servicing MATERIAL No rigging point MACHINE Outriggers not fully extended To determine the root causes of a problem Development of Solution - Lifting Plan Lifting Plan A lifting plan should not limited to, address the followings: 5
6 Site Preparation Site Review & Set-up Job-site conditions: Supporting surfaces Access & stability (transportation) Outriggers Levelling of ground Working area Competency of Personnel: WSH (Operation of Cranes) Regulation The personnel required Crane Management Team 6
7 The personnel s roles, responsibilities and competencies Permit-To-Work system Permit-To-Work System Procedure Supervisor of the Work (BCSS Trained) Safety Assessors WSHO / WSHC Project Manager Supervisor of the Work Yes Yes Supervisor to ensure Project Manager to Close And file in record Yes Yes Application Assessed Duties of Occupier to ensure PTW system are carried out. Approved Posting / Supervisor s Duty Close No No No No Pose a risk to Safety Re-Apply Any person to report any incompatible of works being carried out. Revocation 7
8 Risk Assessment A Risk Assessment is a systematic method of looking at work activities, considering what could go wrong, and deciding on suitable control measures to prevent loss, damage or injury in the workplace. The Risk Assessment should include the controls required to eliminate first. If not, reduce or minimize the risks. Nature and weight of load Some loads can be more difficult to handle because of what they are or how they are being packaged. When handling a load, consider its weight, bulk shape, stability and predictability. 8
9 Type and location of lifting points Using the suitable lifting gear to engage to the correct lifting point to ensure NO failure in the lifting operation. Selection of appropriate lifting gears and equipment Ensure the lifting gears selected are able to keep load secured, balance and with adequate SWL for the load. 9
10 Assessment of the need for tagline to control movement of suspended load It is a good practice to use tag line to control any load from swaying and to keep a safe distance from hoisted load to prevent load injuring the rigger Means of communication during lifting operations Lifting team shall practice the standardize communication in all lifting operations. 10
11 Factors detrimental to the lifting operations such as: inclement weather and poor illumination Prohibition to operate the crane under strong winds condition that affects safe operation; during inclement weather; or when there is insufficient lighting. Provision of a safe place of work for all personnel during lifting operations Suspended Loads The operator of any crane shall as far as is reasonably practicable not to move a suspended load over the head of any person. No one is allowed to work under suspended load at anytime. 11
12 Safe work procedure Safe work procedures are a series of specific steps that guide a worker through a job task from start to finish in a chronological order. Safe work procedures are designed to reduce the risk by minimizing potential hazard exposure. Others Essential knowledge Lifting & Rigging Safety Awareness 12
13 Collapse of crane - Most of the cranes collapsed over-the-side Most of the crane toppled over-the-side Safety awareness for crane operation The load carrying capacity of the crane varies according to the various quadrants Over the side Over the front Operating Zones called quadrants The operation zone Quadrant of operation Over the rear Over the side 13
14 Safety awareness for crane operation Most of the crane collapse over-the-side The capacity of the crane may change when rotating a load from one quadrant to another. The Stability of crane over-the-side is always weak as compare to over-the-front or over-the-rear Safety awareness for crane operation To obtain a safe quadrant is the first consideration for crane set-up operations Instead of the convenience of parking the crane or other convenient reasons 14
15 400t hk hard core Ensure safe operation Adopt to the basic principles of crane operation: Stability of Crane (Tipping Stability) Structural Stability Integrity of Lifting Gear / Safety Devices Ensure safe operation Stability of Crane (Tipping Stability) - Obtain a safe quadrant - Ensure crane operate on good footing - Outriggers fully extended - Crane rest on level & firm ground 65 ton 25mm thk steel plate (2.4mx4m) outrigger base plate 25mm thk steel plate (6mx3m) 45 compacted subgrade 45 15
16 Ensure safe operation Structural Stability - Do not overload crane (refer to load chart always) - Ascertain the load weight before any lift. Ensure safe operation Integrity of Lifting Gear / Safety Devices - Wire ropes / Rigging equipment are in good working conditions - e.g. Over-hoist / over-load limit switch in good working order 16
17 Have a successful lift! To conclude: Plan to lift & NOT lifting then plan! 17
LIFTING PLAN PERMIT TO WORK RISK ASSESSMENT
Code of Practice on Safe Lifting Operations at Workplaces LIFTING PLAN PERMIT TO WORK RISK ASSESSMENT Yeo Kim Hock 13 th December 2012 Introduction-Objectives of Lifting Plan/ PTW/ RA Fundamental Contents-
More informationSafety in Precast Erection
Safety in Precast Erection C. Kirubakaran R Star Consultants Pte Ltd, Singapore Abstract: Construction industry is known to be one of the most hazardous among different industries all over the world. The
More informationReceipt By Jurong Port Representative -To be filled by Jurong Port Representative No Item Yes No Remark 1.
Part 1-General Information -To be filled up by the Applicant (Company Representative) Description of work / Type of Cargo Operation Location Max. Dimension of Cargo Heaviest Cargo Wt. Start Date / Time
More informationNAVSEA STANDARD ITEM
NAVSEA STANDARD ITEM ITEM NO: 009-40 DATE: 18 JUL 2014 CATEGORY: I 1. SCOPE: 1.1 Title: Requirements for Contractor Cranes, Multi-Purpose Machines and Material Handling Equipment at Naval Facilities; accomplish
More informationNAVSEA STANDARD ITEM. 1.1 Title: Contractor Crane, Multi-Purpose Machine and Material Handling Equipment at a Naval Facility; provide
NAVSEA STANDARD ITEM ITEM NO: 009-40 DATE: 26 MARCH 2018 CATEGORY: I 1. SCOPE: 1.1 Title: Contractor Crane, Multi-Purpose Machine and Material Handling Equipment at a Naval Facility; provide 2. REFERENCES:
More informationCPCS renewal test factsheet
CPCS renewal test factsheet Introduction to the CPCS renewal test The industry-led CPCS Management Committee has determined that key safety-related knowledge must be checked on each category prior to the
More informationAppointed person Note: It is recommended that you read the Supporting Information page before you read this factsheet.
Appointed person Note: It is recommended that you read the Supporting Information page before you read this factsheet. Planning and regulatory requirements (Regulatory requirements) The role or duties
More informationLOOK. THINK. DO. Basic Workplace Safety and Health (WSH) Rules 6for Working at Heights. Secure safety harness when working at heights.
6for Working at Heights Falls are the leading cause of workplace fatalities in Singapore. Every month, one worker dies from falling from buildings, structures and ladders. Do your risk assessment before
More information"RIGGING SAFETY IN CONSTRUCTION ENVIRONMENTS"
PRESENTER'S GUIDE "RIGGING SAFETY IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS
More informationLOAD CHARTS RT540E 85% STABILITY ON OUTRIGGERS 75% STABILITY ON RUBBER
LOAD CHARTS RT540E 85% STABILITY ON OUTRIGGERS 75% STABILITY ON RUBBER SERIAL NUMBER 1 2 TABLE OF CONTENTS GENERAL NOTES... 4 WT. REDUCTIONS / LINE PULLS & REEVING INFO / HOIST PERFORMANCE. 5 LIFTING AREA
More informationLOAD CHARTS RT890E METRIC DIN / ISO / 75%
LOAD CHARTS RT89E METRIC DIN / ISO / 75% 232729 SERIAL NUMBER RT89E - S/N 232729 1 RT89E - S/N 232729 2 TABLE OF CONTENTS GENERAL NOTES...4 WEIGHT REDUCTIONS / LINE PULLS & REEVING INFO / RIGGING CHART
More informationLoad Charts Annotated Instructor s Guide. Module MODULE OVERVIEW PREREQUISITES OBJECTIVES PERFORMANCE TASKS MATERIALS AND EQUIPMENT LIST
Load Charts Annotated Instructor s Guide Module 21301-05 MODULE OVERVIEW This module discusses the importance of load charts and charts that apply to different configurations. It includes on-rubber, on-outrigger,
More informationMr. Teo Han Ping Head, Programme Management, Occupational Safety & Health Division, Ministry of Manpower
WSH Regulations and Case Studies WSH Forum for Pest Management 20 Feb 14 Mr. Teo Han Ping Head, Programme Management, Occupational Safety & Health Division, Ministry of Manpower A Great Workforce A Great
More informationQuiz. telescoping. designed to. established. 1 Pag. EWP Pre Reading
EWP Pre Reading and Quiz Due to the intensivee nature of our EWP course, it is mandatory that you study this manual thoroughly before attending your course. Doing so will ensure you have the best possible
More information6000SLX HYDRAULIC CRAWLER CRANE
HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Contents Specifications 3-4 Symbols 4 Outline Winch Assingment 5 Dimensions & Main Specifications : Liftcrane 6 Dimensions & Main Specifications : Luffing
More informationChapter 2 Rigging. Cutting Wire Rope. Anchoring Wire Rope to Drum. Winding Wire Rope Onto Drum
Chapter 2 Rigging Cutting Wire Rope The wire rope must be tightly seized on both sides of the point where the wire rope will be cut, as shown in Figure 2-1. Seize the wire rope with either seizing wire
More informationDuties of WAH Competent Persons
Duties of WAH Competent Persons Who Are theses Stakeholders? What are their Roles and Responsibilities in WAH Activities? Presented By James Tay B.K. 12th Dec 2013 1 Source from OCH Division, MOM 31 st
More information6000SLX SL-N HYDRAULIC CRAWLER CRANE
SL-N SL-N HYDRAULIC CRAWLER CRANE 1804 05H.EA292 SL-N Specifications Contents Specifications 3-4 Symbols 4 Outline Winch Assignment 5 Dimensions & Main Specifications : Liftcrane 6 Dimensions & Main Specifications
More informationGROVE MODEL RT58D - 20 TON CAPACITY
LIFTING CHARTS - Rough Terrain Cranes GROVE MODEL - 20 TON CAPACITY WEIGHT REDUCTIONS FOR LOAD HANDLING DEVICES 23 JIB with 28-70 BOOM * Stowed - 381 lbs. * Erected - 1,950 lbs. 23-38 TELE. JIB with 28-70
More informationPRO Lifting Operations
MS&L Procedure PRO-4.5-0001-1-06 Lifting Operations Document Owner: Bill Kruesi HSSE Manager - Asset Mgmt. Owen Quake ANZ Engineering Authority Approved By: Bill Kruesi HSSE Manager - Asset Mgmt. Control
More informationMANITOWOC MODEL TON CAPACITY
LIFTING CHARTS - Crawler Cranes ANITOWOC ODEL - TON CAPACITY BOO RIGGING GUIDE ODEL # HEAVY LIFT BOO Table of Contents General... Assist Crane Requirements... Accessing Parts... Installation and Removal
More informationSOP GEN-007X Crane and Winch Operations
Page 1 of 7 SOP GEN-007X 1.0 Introduction 2.0 Responsibility 3.0 References 4.0 Training and Qualifications 5.0 Operational Inspections 6.0 Maintenance and Load Tests 7.0 Cranes 8.0 Winches 9.0 Mobile
More informationView thousands of Crane Specifications on FreeCraneSpecs.com. MANITOWOC M-85W 95-Ton liftcrane 20,000 lb CLAMSHELL 18,000 lb DRAGLINE
MANITOWOC M-85W 95-Ton liftcrane 20,000 lb CLAMSHELL 18,000 lb DRAGLINE 94 MANITOWOC M-85W Outline dimensions 95 MANITOWOC M-85W Performance data 96 MANITOWOC M-85W Shipping data (all dimensions length
More informationTLILIC2005A Licence to operate a boomtype elevating work platform (boom length 11 meters or more)
TLILIC2005A Licence to operate a boomtype elevating work platform (boom length 11 meters or more) Release: 1 TLILIC2005A Licence to operate a boom-type elevating work platform (boom length 11 meters or
More informationWorker s Safety Handbook for Rigger and Signalman
Worker s Safety Handbook for Rigger and Signalman Contents Preface 3 Proper Attire for Rigger and Signalman 4 Roles and Responsibilities of a Rigger 5 Good and Bad Rigging Practices 12 Inspection of Hooks
More informationCrane Rental Heavy Machinery Moving Project Management
2 3 4 5 6 7 8 9 10 Link-Belt TG-2300B lifting crane capabilities - heavy duty boom Boom - tubular: 90" x 90" (2.29 x 2.29 m) with open throat top section, 2" (51 mm) diameter boom pendants. Mast - 43'
More informationLoad Falls From Crane
Load Falls From Crane Lessons Learned Volume 03 Issue 20 2004 USW Load Falls From Crane Purpose To conduct a small group lessons learned activity to share information gained from incident investigations.
More informationRigging Safety. 1 Copyright 2014 by PEC Safety Management, Inc. PPT-SM-RIGGING 2014
Rigging Safety 1 Copyright by PEC Safety Management, Inc. Rigger Role Assist the crane operator by properly attaching and detaching loads the crane Know how to safely connect and disconnect loads Discuss
More informationNational 400B. Certification CraneSafe Certification. CraneSafe + Fulford Harbour Group Tel:
Load Chart PRACTICE Exercises Stiff TRUCK CRANE 40 Tonnes & under National 400B Stiff Boom Truck 40 Tonnes & Under PRACTICE EXERCISES LCR.SB40.NA400B.PE1 30 July 2009 + Fulford Harbour Group Tel: 604.952.6033
More information6000SLX SL-T HYDRAULIC CRAWLER CRANE
SL-T SL-T HYDRAULIC CRAWLER CRANE 1804 05H.EA293 SL-T Specifications Contents Specifications 3-4 Symbols 4 Outline Winch Assignment 5 Dimensions & Main Specifications : Liftcrane 6 Dimensions & Main Specifications
More informationDue to. manual. in one day. telescoping. designed to. established. 1 Pag. g v2.0
EWP Pre Reading Manual v2.0 Due to the intensive nature of our one day EWP course, it is mandatory that you study this manual thoroughly before attending your course. Doing so will ensure you have the
More informationMANITOWOC MODEL TON CAPACITY
LIFTING CHARTS - Crawler Cranes ANITOWOC ODEL - 0 TON CAPACITY BOO RIGGING GUIDE ODEL AND # EL BOO Table of Contents General... Assist Crane Requirements... Accessing Parts... Installation and Removal
More informationSEMMPF201 Complying with Statutory Regulations and Organisational Safety Requirements
Complying with Statutory Regulations and Organisational Safety Overview This unit identifies the competences you need to deal with statutory regulations and organisational safety requirements, in accordance
More informationM ANITOWOC M-65 W. 65-MTon liftcrane 6,804 6,124. Courtesy of Crane.Market KG CLAMSHELL KG DRAGLINE
M ANITOWOC M-65 W 6,804 KG CLAMSHELL 6,124 65-MTon liftcrane KG DRAGLINE 45 M ANITOWOC M-65 W Outline dimensions 46 M ANITOWOC M-65 W Performance data 47 M ANITOWOC M-65 W Shipping data (all dimensions
More informationWorking at Height. Policy and Procedures. Author: Beth Webster Assistant Safety Advisor. On behalf of School Safety Committee.
Working at Height Policy and Procedures Author: Beth Webster Assistant Safety Advisor Authorised by: Issued by: John Stephenson Safety Office On behalf of School Safety Committee Review Date: NO LATER
More informationTotal s Golden rules
Total s Golden rules Golden rule No. 12: Simultaneous operations or co-activities This presentation resumes in part the document that won an award at the 2011 World Day for Safety at work, written by:
More informationSafety Risk Assessment Working at Height: Mobile Tower Scaffold
Persons at (Groups) Assessor Appointment Tel. No. Description of Task or Activity A One Direct employees Mark Bloxidge H&S Manager 0208 821 5197 Working at height from Mobile Tower B Contractors/Sub contractors
More informationOPERATING INSTRUCTIONS (Translation) Rope Winch Type , , ,75
OPERATING INSTRUCTIONS (Translation) Rope Winch Type 4202.0,5 4585.0,5 4585.0,75 GB The length of the rope is correct if: 1. User groups Duties Operator Operation, visual inspection Specialist Assembly,
More informationManaging Mobile Crane Hazards. Paul Satti Construction Safety Council. Hazards of Working Around Cranes. Key Concepts:
Managing Mobile Crane Hazards Paul Satti Construction Safety Council Hazards of Working Around Cranes Key Concepts: Electrocution Hazards Caught-In, Compressed or Crushing Hazards Struck-By Hazards Other
More informationFor Review Only No Copying No Saving No Lending No Posting Online
The following copyrighted samples are provided as a service for your review only. Copying, saving, lending, posting online or any general use of these files other than for the purpose provided is unlawful
More informationA MESSAGE FROM THE MD
A MESSAGE FROM THE MD The Life Saving Rules set out clear and simple dos and don ts covering activities with the highest potential safety risk and apply to all employees and contractors. The best-performing
More informationRisk and Hazard Management
Risk and Hazard Management Models S40 Safe 227 Maximum 12.2 Maximum 14.2 S45 Working 227 Platform 13.7 Working 15.7 S60 Load (kg) 227 Drive 18.3 Height (m) 20.3 S65 227 Height (m) 19.8 21.8 S65 TRAX 227
More informationConstructive Ideas. Assessing the risk of sprains and strains CI Introduction. Step 1: Identify hazards. What is musculoskeletal injury (MSI)?
Constructive Ideas Innovative ideas to reduce soft tissue injuries in the construction in dus try! Assessing the risk of sprains and strains Introduction What is musculoskeletal injury (MSI)? Musculoskeletal
More informationProduct Guide. Crawler Crane
Crawler Crane 220 US Tons (100 Metric Tons) @ 16 ft 5 in Radius 285 ft Max Tip (Main Boom) Main Boom, Fixed Jib and Luffing Jib Configurations Product Guide KEY FEATURES ULTRA CAB The Ultra Cab, designed
More information1. Objective of the initiative To ensure that all employees and subcontractors are aware of the risks associated with working at height.
Safety Initiative 02 Working at Height May 2011 CONTENTS 1. Objective of the initiative 2. Overview. 3. Implementation 4. Duties 5. Hierarchy of Controls 6. Workplace Inspections 7. Fragile Surfaces 8.
More informationSafe Work Method Statement
TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Dogging of Crane General Loading and Unloading SWMS No. 20 Authorized
More information8. Fall Protection Procedures WAC
1.0 Fall Protection Introduction 8. Fall Protection Procedures WAC 296-155-245 If an employee is exposed to a fall hazard of ten (10) feet or more in height, the employee must use a fall restraint, fall
More information1.1 OHS Policy and Responsibilities
1.1 OHS Policy and Responsibilities At Canadian Rope Access Specialists Inc. safety is our primary concern and the health and safety of our employees, clients and contractors is of paramount importance
More informationSafe Work Method Statement
Title Skid Steer Operation (Bobcat) SWMS No. 14 Authorized and email Signed by the (Managing Director / CEO / Partner / Proprietor) on Date 01/08 /2016 Safe Work Procedure for the Work:- Yes No Employees
More informationVALE # Name: Dave Duczeminski Position: Manager Department: Maintenance Engineering
017-10-30 1 of 13 Training Code Document Owner: Name: Dave Duczeminski Position: Manager Department: Maintenance Engineering Table of Contents 1.0 PURPOSE....0 SCOPE....1. EXCEPTIONS... 3.0 REFERENCES...
More informationLINK-BELT MODEL HC-278H TON CAPACITY
TRANSPORTATION SPECS - Conventional Truck Cranes LINK-BELT MODEL HC-278H - 300 TON CAPACITY COMPONENT WEIGHTS LBS. KGS. BOOM TYPE: TUBULAR 80 X 68 LBS. KGS. Complete Crane C/W 70 Boom, 320,123 145 207
More informationLifting Operations and Lifting Equipment Regulations (LOLER) Policy. Version No. 2. Review: May 2019
Livewell Southwest Lifting Operations and Lifting Equipment Regulations (LOLER) Policy Version No. 2 Review: May 2019 Notice to staff using a paper copy of this guidance The policies and procedures page
More information(Draft) Guidance Notes on Safe Use of Lorry-mounted Crane
(Draft) Guidance Notes on Safe Use of Lorry-mounted Crane s 1 This Guidance Notes is prepared by the Occupational Safety and Health Branch Labour Department First Edition xxx 2016 This Guidance Notes is
More informationACCREDITED SAFETY TRAINING FOR EQUIPMENT OPERATORS
JOB HAZARD ANALYSIS ELEVATING WORK PLATFORM Note: This is just a guideline. A Assessment must be designed for each specific EWP and each specific work area and task. A JHA is a never ending document. There
More informationHoisting Equipment Cable puller & Accessories
Yale hoists and trolleys are not ed for Cable puller model Yaletrac Pulling force 800-3200 It has a light weight, compact, high tensile aluminium alloy housing with a large flat bottom surface for increased
More informationTechnical Data. Luffing Capacities. Luffing Attachment (supersedes 5784)-1217-U2Luffer
1 5802 (supersedes 5784)-1217-U2Luffer Technical Data Luffing Capacities Luffing Attachment CAUTION: This material is supplied for reference use only. Operator must refer to in-cab Crane Rating Manual
More informationLessons Learnt Case Report
Lessons Learnt Case Report Flash Fire in Confined Space August 2009 RBA-LLCR-006 Contents Page 1. Introduction 1 2. Summary of Events 1 3. Findings 2 4. Analysis 6 5. Conclusion 7 6. Recommendations 8
More informationSection 16B. Fall Protection. Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents:
Section 16B. Fall Protection Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents: 1. Personal factors Lack of concentration. Use of medication. Poor
More information7 Hazard assessment 8 Worker participation 9 Hazard elimination and control
This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry
More informationMEWP - Boom Note: It is recommended that you read the Supporting Information page before you read this factsheet.
MEWP - Boom Note: It is recommended that you read the Supporting Information page before you read this factsheet. Preparation for work (Preparation) Boom-type mobile elevated work platforms, commonly known
More informationSafety Handbook. Quality, Environmental, Health & Safety Policy
CS Construction & Geotechnic Pte. Ltd., CS Bored Pile System Pte. Ltd., L&M Foundation Specialist Pte. Ltd., Double Wong Foundation Pte. Ltd., Soil Investigation Pte. Ltd., THL Foundation Equipment Pte.
More informationHAZARD IDENTIFICATION & RISK ASSESSMENT
Clearheart Construction Co., Inc. Hazard Identification & Risk Assessment HAZARD IDENTIFICATION & RISK ASSESSMENT If all employees and subcontractors followed established OSHA compliant procedures to accomplish
More informationSOUTHEAST REGIONAL MAINTENANCE CENTER LOCAL STANDARD ITEM CFR Part , Operator Qualification and Certification
SOUTHEAST REGIONAL MAINTENANCE CENTER LOCAL STANDARD ITEM ITEM NO: 099-74SE DATE: 18 FEB 2014 CATEGORY: I 1. SCOPE: 1.1 Title: General Safety Requirements; accomplish 2. REFERENCES: 2.1 Standard Items
More informationOperate non slewing mobile cranes (less than three tonnes capacity)
Operate non slewing mobile cranes (less than three tonnes capacity) Code Workplace Health and Safety Queensland is moving to a new learning and assessment system for certificates to work in prescribed
More information??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls.
Intent??????? is committed to providing a safe work environment for its employees and preventing occupational injuries due to falls. Fall Protection is an integral part of our commitment to a safe work
More informationHS329 Risk Management Procedure
HS329 Risk Management Procedure Work Health and Safety Act 2011 Policy hierarchy link Work Health and Safety Regulation 2011 Work Health and Safety Policy Code of Practice How to Manage Work Health and
More informationOn the Lee Tunnel project, some significant near misses involving cranes have occurred this year.
On the Lee Tunnel project, some significant near misses involving cranes have occurred this year. Experience has shown that lifting operations can be hazardous work activities if not properly planned.
More informationCranes and Hoists. Elevating Work Platforms ASSESSMENT
Cranes and Hoists Elevating Work Platforms ASSESSMENT Part 1 Part 2 Performance Oral/Written June 1995 Contents Page Assessor guidelines general guidelines for Schedule B i Part one Performance Assessment
More information2. The purpose of this program is to achieve the following objectives:
Section 16A. Lockout and Tagout Program 1. In the course of their duties, personnel at the TFREC may need to secure controls, switches, and equipment in order to prevent injury caused by the sudden, unexpected
More informationRisk Control at United Fire Group
In the United States, falls are the leading cause of fatalities on a construction site. Employers and employees need to do the following: Where protection is required, select fall protection systems appropriate
More informationLarge Valve Causes Back Injury
Large Valve Causes Back Injury Lessons Learned Volume 03 Issue 03 2004 USW Large Valve Causes Back Injury Purpose To conduct a small group lessons learned activity to share information gained from incident
More informationFATAL AND SEVERE RISK PROGRAM
FATAL AND SEVERE RISK PROGRAM LEADER SESSION FALL FROM HEIGHTS Only do the task if it can be done safely FALL FROM HEIGHTS OUR COMMITMENT LIFE SAVING BEHAVIOUR: I WILL ALWAYS USE ADEQUATE PROTECTION WHERE
More informationQ-1, as chief officer what are the checking s that you should carry out before using lifting gear? (Risk assessment and risk management)
Lifting Gears Q-1, as chief officer what are the checking s that you should carry out before using lifting gear? (Risk assessment and risk management) Make sure that ship s lifting gear and associate equipments
More informationNew Mexico Institute of Mining & Technology. Fall Protection Program
New Mexico Institute of Mining & Technology Fall Protection Program REGULATORY STANDARDS: OSHA - 29 CFR 1910.66 29 CFR 1910.128, 129, 130, 131, (Proposed) 29 CFR 1926.104 29 CFR 1926.500 BASIS: Approximately
More informationDemag TC3000
www.barnhartcrane.com Demag TC3000 550T 550T 550T Component Weights Weight of counterweighted Machine with 39' (12m) boom Superstructure only (with 4 drums, boom foot section and mast) Truck Carrier Outrigger
More informationSAFETY MANAGEMENT SYSTEM
Equipment Location: Hazard Hired From All Master Hire Stores Entanglement Can anyone s hair, clothing, gloves, necktie, jewellery, cleaning brushes, rags or other materials become entangled with moving
More informationRisk and Hazard Management
Risk and Hazard Management Models GS1532 Safe 272 Maximum 4.6 Maximum 6.6 GS1930 Working 227 Platform 5.8 Working 7.8 GS1932 Load (kg) 227 Drive 5.8 Height (m) 7.8 GS2032 363 Height (m) 6.1 8.1 GS2632
More informationJohn Paul (JP) Jones President
John Paul (JP) Jones President of Required Training for Telecommunications Tower Workers in the USA WHAT STANDARDS AND REGULATIONS DO WE TRAIN TO? OSHA CFR 29-1926 & 1910 ANSI 490.1 ANSI Z359 ANSI 10.48
More informationSection J. How to develop safety elements for project safety management system. How to develop safety elements for project SMS
Section J How to develop safety elements for project safety management system 1. Once the project management has developed or adopted a safety policy, it needs to develop safety elements to meet the objectives
More informationEMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
Name Department Initial Orientation Date Supervisor Review Instructions: Check off each section once you have read and discussed it with your Supervisor. EMPLOYEE SAFETY ORIENTATION - PHYSICAL PLANT, RESIDENCE
More informationCKE4000 HYDRAULIC CRAWLER CRANE GENERAL DIMENSIONS PRELIMINARY. Max. Lifting Capacity
HYDRAULIC CRAWLER CRANE CKE4000 Max. Lifting Capacity: 350 t Max. Boom Length : 78.0 m Max. Luffing Jib Combination : 72.0 + 54.0 m PRELIMINARY S P E C I F I C A T I O N S Main Boom Max. Lifting Capacity
More informationHampstead Hill School Health and Safety Policy: Confined Spaces
All Hampstead Hill School Policies are always to be read and considered in conjunction with Equal Opportunities, Race Equality and Inclusion Policies. This Policy of Hampstead Hill School applies to all
More informationLEVEL 2 CERTIFICATE OF COMPETENCE IN CHAINSAW AND RELATED OPERATIONS ASSESSMENT SCHEDULE
Registered Charity No. 1096429 STONELEIGH PARK, WARWICKSHIRE CV8 2LG Tel: 024 7685 7300 Fax: 024 7669 6128 Email: information@nptc.org.uk LEVEL 2 CERTIFICATE OF COMPETENCE IN CHAINSAW AND RELATED OPERATIONS
More informationRescue of Persons from MEWPs
Rescue of Persons from MEWPs Plant Safety Group 1. Introduction When MEWPs are used there is always the risk of persons in the work platform becoming stranded at height due to MEWP malfunction, breakdown
More informationSafety Management System. Initial Revision Date: Version Revision No. 02 GENERAL SAFETY HEALTH PROVISION
Revision Preparation: Safety Mgr Authority: President Issuing Dept: Safety Page: Page 1 of 5 Purpose This program is written to be in compliance with local regulatory requirements and provide directives
More informationArab Fertilizers Association Knowledge Sharing Template
In ammonia plant for abuqir 2 plant, during rising one of the workers to the top of absorption tower to check the trays of the absorption tower by crane suspended man basket. The crane shacked causing
More informationSummary of Advantages and Disadvantages of Rope Access Techniques
WJE ADVISORY: MARCH 2018 Summary of Advantages and Disadvantages of Rope Access Techniques The following is a brief summary of advantages and disadvantages of using rope access techniques to access the
More information830.8 Interpretations No.1 8-1
. 830.8 Interpretations No.1 8-1 Interpretation: 8.1 ANSI/ASME B30.8-1982 Date Issued: August 4, 1987 Question: What is the meaning of "blocked and anchored" as it relates to land cranes mounted on a barge
More informationMaterial Lift Risk and Hazard Management
Material Lift Risk and Hazard Management Models GH 3.8 Safe 136 kg Maximum 3.80 m GH5.6 Working 113 kg Lifting 5.60 m LL Load (kg) 91 kg Height (m) 1.70 m GL-4 227 kg 1.80 m GL-8 181 kg 3.06 m GL-10 159
More informationA Guide to working safely near Overhead Power Lines
A Guide to working safely near Overhead Power Lines 1 Please Note This information is for guidance only and is not to be taken as an expression of the law. It should be read in conjunction with the Workplace
More informationA GUIDE TO BUYING FALL ARREST EQUIPMENT. uk.rs-online.com (UK customers) (International customers)
A GUIDE TO BUYING FALL ARREST EQUIPMENT (UK customers) www.rs-components.com (International customers) INTRODUCTION In a world of evolving legislation employers in the EU have had a legal responsibility
More informationHealth & Safety Policy HSP 13 Working at Height Version Status Date Title of Reviewer Purpose/Outcome
Health & Safety Policy HSP 13 Working at Height Version Status Date Title of Reviewer Purpose/Outcome 1.0 Draft 07.03.2016 David Maine 1 st Draft for consultation/review 1.1 Approved 10.01.2017 David Maine
More informationWheeler Cranes 6 McIntyre Rd Tomago NSW 2324
Wheeler Cranes 6 McIntyre Rd Tomago NSW 2324 ABN: 34 088 229 190 This SWMS has been developed and authorised by: Name Albie Wheeler Position Managing Director Date 1/7/12 Signature Phone 0249649991 Mobile
More informationManually Propelled Risk and Hazard Management
Manually Propelled Risk and Hazard Management Models AWP-20S Safe 159 Maximum N/A Maximum 6.12 AWP-25S Working 159 Platform N/A Working 7.57 AWP-30S Load (kg) 159 Height (m) N/A Height (m) 9.00 AWP-36S
More informationGENERAL HEALTH AND SAFETY REQUIREMENTS
GENERAL HEALTH AND SAFETY REQUIREMENTS Index Section E27 E29 E38 E39 E41 Title Travel over and work on ice Roof Work Emergency Plan Risk Assessment Emergency Procedures Emergency Training Revision Date
More informationWork Activity (e.g. Road Work): Work Location:.
Working with Cranes Work Activity (e.g. Road Work): Work Location:. GENERAL INFORMATION Hinchinbrook Shire Council Lannercost Street Ingham Qld, 4850 ABN 46 291 971 168 Ph: 47764610 All personnel conducting
More informationEquipment Operation Procedures
Procedures Purpose It is the policy of this company to permit only trained and authorized personnel to operate construction equipment. These procedures are applicable to both daily operators, and those
More informationTABLE OF CONTENTS PART 2 - CONFINED SPACES
May 11, 2006 TABLE OF CONTENTS PART 2 - CONFINED SPACES Page DEFINITIONS... 2-1 GENERAL... 2-2 RESPONSIBILITIES... 2-2 HAZARD ASSESSMENT AND WORK PROCEDURES... 2-3 IDENTIFICATION AND ENTRY PERMITS... 2-3
More informationOccupational Protective Equipment
Introduction One of the leading occupational dangers in today s workforce is the risk of death or injury due to falls. Falls from ladders, scaffolds, buildings, or other elevations have become the second
More informationWORKPLACE SAFETY AND HEALTH ACT (CHAPTER 354A) WORKPLACE SAFETY AND HEALTH (CONFINED SPACES) REGULATIONS 2009
1 of 9 08/06/2012 10:25 Workplace Safety and Health (Confined Spaces) Regulations 2009 Enacting Formula Part I PRELIMINARY 1 Citation and commencement 2 Definitions 3 Application Part II GENERAL PROVISIONS
More information