LIFTING PLAN PERMIT TO WORK RISK ASSESSMENT

Size: px
Start display at page:

Download "LIFTING PLAN PERMIT TO WORK RISK ASSESSMENT"

Transcription

1 Code of Practice on Safe Lifting Operations at Workplaces LIFTING PLAN PERMIT TO WORK RISK ASSESSMENT Yeo Kim Hock 13 th December 2012 Introduction-Objectives of Lifting Plan/ PTW/ RA Fundamental Contents- Key Elements of a Lifting Plan Review of the Lifting Plan Conclusion 1

2 Objectives of a Lifting Plan Facilitate common understanding amongst the lifting crews Conduct Risk Assessment Eliminate Risks Mitigate Risks PTW LP Safe Outcomes & Compliance to Regulations Fundamental Contents Key Elements of a Lifting Plan Means of Communication Personnel Involved in the lifting operation Physical & Environmental Considerations Acronym GOLDEN Lifting Supervisor Crane Operator Rigger Signalman Site Supervisor/ others Detail of the Load Detail of the Lifting Equipment Type of Lifting Equipment Maxi SWL Max boom/jib length Intended Load Radius Visual-Standard Hand Signal Audio-Radio Within sight and view of load and all personnel Description of the load/s Load Configurations Overall dimensions Weight Centre of Gravity. 2

3 Fundamental Contents Key Elements of a Lifting Plan Critical Document and Information Method of Rigging Type of LGs Choker Hitch Basket Hitch Direct Rigging Sling Angle Chain /Webbing/Wire Sling Hook, Shackle Other Considerations based on the 5M Model Load Capacity Chart/ Range Diagram Operations Manual/ Logbook Appointment of Competent Personnel Valid Test Certificate Checklists Sequence/ Special Precautions Sketch of the Lifting Zone Public Safety/ Tandem Ops Machine Material Medium Man Method Initial and Final location of the load Path of the load Load Radius Obstructions General 3

4 - General 1 Detail of the Load/s 4

5 - Detail of the load/s - Detail of the load/s 5

6 3 Detail of the Lifting Equipment/ Lifting Gears - Detail of the Lifting Equipment 6

7 - Detail of the Lifting Equipment 4 Means of Communications 7

8 5 Personnel Involved in the Lifting Operation - Lifting Personnel 8

9 6 Physical & Environmental Considerations Physical & Env Considerations Stability of Crane (Tipping Stability) Structural Stability Integrity of Lifting Gear/ Safety Devices GOLDEN 9

10 7 Sequence and Special Precautions Public Safety Tandem Lift -Sequence and Special Precautions 10

11 8 Sketch of the Zone of Operation -Sketch of Ops Zone 11

12 -Sketch of Ops Zone - Sketch of Ops Zone 12

13 Lifting Plan PTW RA Lifting Plan PTW RA 13

14 Lifting Plan PTW RA Checklists 14

15 Review of the Lifting Plan Changes to Lifting Plans Changes to the type and capacity of lifting equipment used. Changes to the sequence of operations. Changes requiring reconfiguration of the crane (boom/jib length, outrigger beam length reduction, parts of hoist line, etc). Changes in the rigging details which could result in a reduction in rigging strength or significant increase in rigging weight. Changes in surrounding environment such as sudden presence of a temporary structure obstructing the operation. Changes in the weather and environmental conditions which have an adverse impact to the lifting operation. Changes to safety-critical personnel. Review of the Lifting Plan? 15

16 In conclusion Make Every Lifting Operations SAFE Thank You For your attention 16

Dangerous Occurrence: Collapse of mobile crane

Dangerous Occurrence: Collapse of mobile crane Accident Case Studies Dangerous Occurrence: Collapse of mobile crane Crane Operator had hoisted up a bag of sand (780 Kg) over the rooftop. While doing so, the Overload Radius Indicator (ORI) alarm sounded

More information

Receipt By Jurong Port Representative -To be filled by Jurong Port Representative No Item Yes No Remark 1.

Receipt By Jurong Port Representative -To be filled by Jurong Port Representative No Item Yes No Remark 1. Part 1-General Information -To be filled up by the Applicant (Company Representative) Description of work / Type of Cargo Operation Location Max. Dimension of Cargo Heaviest Cargo Wt. Start Date / Time

More information

VALE # Name: Dave Duczeminski Position: Manager Department: Maintenance Engineering

VALE # Name: Dave Duczeminski Position: Manager Department: Maintenance Engineering 1 of 9 Training Code Document Owner: Name: Dave Duczeminski Position: Manager Department: Maintenance Engineering Table of Contents 1.0 PURPOSE... 2 2.0 SCOPE... 2 2.1. EXCEPTIONS... 2 3.0 REFERENCES...

More information

LOAD CHARTS RT890E METRIC DIN / ISO / 75%

LOAD CHARTS RT890E METRIC DIN / ISO / 75% LOAD CHARTS RT89E METRIC DIN / ISO / 75% 232729 SERIAL NUMBER RT89E - S/N 232729 1 RT89E - S/N 232729 2 TABLE OF CONTENTS GENERAL NOTES...4 WEIGHT REDUCTIONS / LINE PULLS & REEVING INFO / RIGGING CHART

More information

Appointed person Note: It is recommended that you read the Supporting Information page before you read this factsheet.

Appointed person Note: It is recommended that you read the Supporting Information page before you read this factsheet. Appointed person Note: It is recommended that you read the Supporting Information page before you read this factsheet. Planning and regulatory requirements (Regulatory requirements) The role or duties

More information

LOAD CHARTS RT540E 85% STABILITY ON OUTRIGGERS 75% STABILITY ON RUBBER

LOAD CHARTS RT540E 85% STABILITY ON OUTRIGGERS 75% STABILITY ON RUBBER LOAD CHARTS RT540E 85% STABILITY ON OUTRIGGERS 75% STABILITY ON RUBBER SERIAL NUMBER 1 2 TABLE OF CONTENTS GENERAL NOTES... 4 WT. REDUCTIONS / LINE PULLS & REEVING INFO / HOIST PERFORMANCE. 5 LIFTING AREA

More information

Safety in Precast Erection

Safety in Precast Erection Safety in Precast Erection C. Kirubakaran R Star Consultants Pte Ltd, Singapore Abstract: Construction industry is known to be one of the most hazardous among different industries all over the world. The

More information

NAVSEA STANDARD ITEM. 1.1 Title: Contractor Crane, Multi-Purpose Machine and Material Handling Equipment at a Naval Facility; provide

NAVSEA STANDARD ITEM. 1.1 Title: Contractor Crane, Multi-Purpose Machine and Material Handling Equipment at a Naval Facility; provide NAVSEA STANDARD ITEM ITEM NO: 009-40 DATE: 26 MARCH 2018 CATEGORY: I 1. SCOPE: 1.1 Title: Contractor Crane, Multi-Purpose Machine and Material Handling Equipment at a Naval Facility; provide 2. REFERENCES:

More information

For Review Only No Copying No Saving No Lending No Posting Online

For Review Only No Copying No Saving No Lending No Posting Online The following copyrighted samples are provided as a service for your review only. Copying, saving, lending, posting online or any general use of these files other than for the purpose provided is unlawful

More information

VALE # Name: Dave Duczeminski Position: Manager Department: Maintenance Engineering

VALE # Name: Dave Duczeminski Position: Manager Department: Maintenance Engineering 017-10-30 1 of 13 Training Code Document Owner: Name: Dave Duczeminski Position: Manager Department: Maintenance Engineering Table of Contents 1.0 PURPOSE....0 SCOPE....1. EXCEPTIONS... 3.0 REFERENCES...

More information

Rigging Safety 16 Hour (API RP 2D 7 th Edition) Course Outline

Rigging Safety 16 Hour (API RP 2D 7 th Edition) Course Outline Rigging Safety 16 Hour (API RP 2D 7 th Edition) Course Outline Prerequisites: This course shall have no formal pre-requisite. The individual should have no history of a disabling medical condition, which

More information

NAVSEA STANDARD ITEM

NAVSEA STANDARD ITEM NAVSEA STANDARD ITEM ITEM NO: 009-40 DATE: 18 JUL 2014 CATEGORY: I 1. SCOPE: 1.1 Title: Requirements for Contractor Cranes, Multi-Purpose Machines and Material Handling Equipment at Naval Facilities; accomplish

More information

Managing Mobile Crane Hazards. Paul Satti Construction Safety Council. Hazards of Working Around Cranes. Key Concepts:

Managing Mobile Crane Hazards. Paul Satti Construction Safety Council. Hazards of Working Around Cranes. Key Concepts: Managing Mobile Crane Hazards Paul Satti Construction Safety Council Hazards of Working Around Cranes Key Concepts: Electrocution Hazards Caught-In, Compressed or Crushing Hazards Struck-By Hazards Other

More information

Crane & Rigging Brain Teasers

Crane & Rigging Brain Teasers Crane & Rigging Brain Teasers Host: Mike Parnell President/CEO, ITI ASME B30 Vice Chair (Cranes & Rigging) ASME P30 Chair (Lift Planning) The views expressed in this presentation are that of ITI and are

More information

Lifting & Hoisting Procedure

Lifting & Hoisting Procedure AL-Yamama Engineering Company HSSE Department (s) Lifting & Hoisting Contents 1. Objective Error! Bookmark not defined. 2. Scope 1 3. Risk domain and risk 1 4. Activity Responsibility Matrix 1 5. Related

More information

GROVE MODEL RT58D - 20 TON CAPACITY

GROVE MODEL RT58D - 20 TON CAPACITY LIFTING CHARTS - Rough Terrain Cranes GROVE MODEL - 20 TON CAPACITY WEIGHT REDUCTIONS FOR LOAD HANDLING DEVICES 23 JIB with 28-70 BOOM * Stowed - 381 lbs. * Erected - 1,950 lbs. 23-38 TELE. JIB with 28-70

More information

CPCS renewal test factsheet

CPCS renewal test factsheet CPCS renewal test factsheet Introduction to the CPCS renewal test The industry-led CPCS Management Committee has determined that key safety-related knowledge must be checked on each category prior to the

More information

"RIGGING SAFETY IN CONSTRUCTION ENVIRONMENTS"

RIGGING SAFETY IN CONSTRUCTION ENVIRONMENTS PRESENTER'S GUIDE "RIGGING SAFETY IN CONSTRUCTION ENVIRONMENTS" Part of the "CONSTRUCTION SAFETY KIT" Series Quality Safety and Health Products, for Today...and Tomorrow OUTLINE OF MAJOR PROGRAM POINTS

More information

SOP GEN-007X Crane and Winch Operations

SOP GEN-007X Crane and Winch Operations Page 1 of 7 SOP GEN-007X 1.0 Introduction 2.0 Responsibility 3.0 References 4.0 Training and Qualifications 5.0 Operational Inspections 6.0 Maintenance and Load Tests 7.0 Cranes 8.0 Winches 9.0 Mobile

More information

Heavy Equipment Technician Rigging

Heavy Equipment Technician Rigging 1. What is SWL? a. Single weight of load b. Second weakest location c. Working load limit Heavy Equipment Technician IP Red Seal Practice Exam d. Abbreviation for swivel Heavy Equipment Technician Rigging

More information

Worker s Safety Handbook for Rigger and Signalman

Worker s Safety Handbook for Rigger and Signalman Worker s Safety Handbook for Rigger and Signalman Contents Preface 3 Proper Attire for Rigger and Signalman 4 Roles and Responsibilities of a Rigger 5 Good and Bad Rigging Practices 12 Inspection of Hooks

More information

Demag TC3000

Demag TC3000 www.barnhartcrane.com Demag TC3000 550T 550T 550T Component Weights Weight of counterweighted Machine with 39' (12m) boom Superstructure only (with 4 drums, boom foot section and mast) Truck Carrier Outrigger

More information

CURRICULUM DEVELOPMENT ADVISORY. Rigger and Signalman Course

CURRICULUM DEVELOPMENT ADVISORY. Rigger and Signalman Course CURRICULUM DEVELOPMENT ADVISORY Rigger and Signalman Course Version 1.0 1 Nov 2011 Workplace Safety and Health Council, Ministry of Manpower, Singapore (MOM) All rights reserved. This document is provided

More information

Care, Use and Inspection

Care, Use and Inspection Care, Use and Inspection of Synthetic Web Slings Safety is the paramount consideration involved in the use of any web sling. This standard does not purport to address all safety concerns, if any, associated

More information

PRO Lifting Operations

PRO Lifting Operations MS&L Procedure PRO-4.5-0001-1-06 Lifting Operations Document Owner: Bill Kruesi HSSE Manager - Asset Mgmt. Owen Quake ANZ Engineering Authority Approved By: Bill Kruesi HSSE Manager - Asset Mgmt. Control

More information

Crane Rental Heavy Machinery Moving Project Management

Crane Rental Heavy Machinery Moving Project Management 2 3 4 5 6 7 8 9 10 Link-Belt TG-2300B lifting crane capabilities - heavy duty boom Boom - tubular: 90" x 90" (2.29 x 2.29 m) with open throat top section, 2" (51 mm) diameter boom pendants. Mast - 43'

More information

Job Safety and Environmental Analysis (JSEA)/Safe Work Method Statement (SWMS)

Job Safety and Environmental Analysis (JSEA)/Safe Work Method Statement (SWMS) Job Safety and Environmental Analysis (JSEA)/Safe Work Method Statement (SWMS) Part 1: Project and Task Identification Process: Initiators of JSEAs are responsible for consulting the Project Supervisor,

More information

WEB SLING BASICS AND HOW TO ORDER WEB SLINGS

WEB SLING BASICS AND HOW TO ORDER WEB SLINGS 27 WEB SLING BASICS AND HOW TO ORDER WEB SLINGS TYPE I Web sling made with a triangle fitting on one end and a slotted triangle choker fitting on the other end. It can be used in a vertical, basket or

More information

6000SLX HYDRAULIC CRAWLER CRANE

6000SLX HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE HYDRAULIC CRAWLER CRANE Contents Specifications 3-4 Symbols 4 Outline Winch Assingment 5 Dimensions & Main Specifications : Liftcrane 6 Dimensions & Main Specifications : Luffing

More information

SAMPLE PAGE. Section 2... Wire Rope

SAMPLE PAGE. Section 2... Wire Rope Section 2...................................................... Wire Rope Never use any kind of clip to directly connect two straight lengths of wire rope to form a continuous piece. Do not make up slings

More information

Wilkins Safety Group

Wilkins Safety Group H & S Guidance - Lifting Operations and Equipment Health and Safety Information (See also: Management of Health & Safety ; Fork Lift Trucks ; Warehousing ; Work Equipment ) INTRODUCTION The Lifting Operations

More information

Guide to Documentation and Marking Part 5 Lifting Accessories, Slings

Guide to Documentation and Marking Part 5 Lifting Accessories, Slings Guide to Documentation and Marking Part 5 Lifting Accessories, Slings Document reference LEEA 059-5 version 1 dated 31.07.14 Introduction. This guide is aimed at manufacturers, distributors and users of

More information

SEMFEW339 - SQA Unit Code H1WC 04 Slinging, lifting and moving materials and components

SEMFEW339 - SQA Unit Code H1WC 04 Slinging, lifting and moving materials and components Slinging, lifting and moving materials and components Overview This unit identifies the competencies you need to move loads by slinging and lifting in accordance with approved procedures. You will be required

More information

6000SLX SL-N HYDRAULIC CRAWLER CRANE

6000SLX SL-N HYDRAULIC CRAWLER CRANE SL-N SL-N HYDRAULIC CRAWLER CRANE 1804 05H.EA292 SL-N Specifications Contents Specifications 3-4 Symbols 4 Outline Winch Assignment 5 Dimensions & Main Specifications : Liftcrane 6 Dimensions & Main Specifications

More information

Lifting Slings. Before equipment use, please read this operation manual carefully. Serial Number: Date Purchased:

Lifting Slings. Before equipment use, please read this operation manual carefully. Serial Number: Date Purchased: Lifting Slings OPERATION MANUAL This operation manual is intended as an instruction manual for trained personnel who are in charge of installation, maintenance, repair etc. Before equipment use, please

More information

MANITOWOC MODEL TON CAPACITY

MANITOWOC MODEL TON CAPACITY LIFTING CHARTS - Crawler Cranes ANITOWOC ODEL - TON CAPACITY BOO RIGGING GUIDE ODEL # HEAVY LIFT BOO Table of Contents General... Assist Crane Requirements... Accessing Parts... Installation and Removal

More information

FEDERATION OF PILING SPECIALISTS CODE OF INDUSTRY BEST PRACTICE LIFTING OPERATIONS AND LIFTING EQUIPMENT REGULATIONS 1998

FEDERATION OF PILING SPECIALISTS CODE OF INDUSTRY BEST PRACTICE LIFTING OPERATIONS AND LIFTING EQUIPMENT REGULATIONS 1998 FEDERATION OF PILING SPECIALISTS CODE OF INDUSTRY BEST PRACTICE LIFTING OPERATIONS AND LIFTING EQUIPMENT REGULATIONS 1998 CONTENTS 1. Introduction 2. Definitions and Statements 3. LOLER Considerations

More information

EQUIPMENT. (See also: Management of Health & Safety (51); Fork Lift Trucks (32); Warehousing (87); Work Equipment (91))

EQUIPMENT. (See also: Management of Health & Safety (51); Fork Lift Trucks (32); Warehousing (87); Work Equipment (91)) & (See also: Management of Health & Safety (51); Fork Lift Trucks (32); Warehousing (87); Work Equipment (91)) INTRODUCTION & The Lifting Operations and Lifting Equipment Regulations 1998 (LOLER) came

More information

BANKSMAN / SLINGER. 1. What is the smallest size diameter of synthetic rope allowed for use as a hand held tagline?

BANKSMAN / SLINGER. 1. What is the smallest size diameter of synthetic rope allowed for use as a hand held tagline? BANKSMAN / SLINGER 1. What is the smallest size diameter of synthetic rope allowed for use as a hand held tagline? A. 16mm B. 10mm C. 12mm 2. What is the maximum temperature that a webbing sling can be

More information

Safe Work Method Statement

Safe Work Method Statement TE CONTROLLED COPY OF TIS DOCUMENT IS ON TE COMPUTER NETWORK PRINTED COPIES ARE ONLY CURRENT FOR TE DATE AT TE BOTTOM OF TE PAGE. Title Dogging of Crane General Loading and Unloading SWMS No. 20 Authorized

More information

Premium PowerPoint Presentation. Rigging Review

Premium PowerPoint Presentation. Rigging Review Premium PowerPoint Presentation Rigging Review Chapter 1 Hoisting Safety Review: What about the CG Symmetrical vs. Asymmetrical Balanced and Unbalanced Lifting Lug Hooks Angle Deformation Safety Gates

More information

operation WARNING! Operator must read and understand instructions here and on sling prior to use.

operation WARNING! Operator must read and understand instructions here and on sling prior to use. SLINGS S-17880, S-17881 S-17882, S-17883 S-17884, S-17885 operation WARNING! Operator must read and understand instructions here and on sling prior to use. Safe Operating Practices Inspect slings prior

More information

7 Hazard assessment 8 Worker participation 9 Hazard elimination and control

7 Hazard assessment 8 Worker participation 9 Hazard elimination and control This document is a guideline only. Employers have a responsibility of assessing all applicable occupational health and safety legislation, for the tasks they are performing. Businesses in this industry

More information

Meuangvang Development Co.LTD Standard Working Procedure 011 Towing Equipment

Meuangvang Development Co.LTD Standard Working Procedure 011 Towing Equipment 1. Application To provide a standard work practice for, as required in accordance with Meuangvang Development Co Ltd Safety Management Program 2. Revision Schedule Rev # Old Section Ref New Section Ref

More information

TULSA CHAIN.COM, LLC.

TULSA CHAIN.COM, LLC. RECOMMENDED OPERATING, CARE AND INSPECTION MANUAL FOR SYNTHETIC POLYESTER ROUNDSLINGS WSTDA-RS-2 TM Web Sling & Tie Down Association 2005 $6.00 MANDATORY AND ADVISORY RULES Mandatory rules are characterized

More information

6000SLX SL-T HYDRAULIC CRAWLER CRANE

6000SLX SL-T HYDRAULIC CRAWLER CRANE SL-T SL-T HYDRAULIC CRAWLER CRANE 1804 05H.EA293 SL-T Specifications Contents Specifications 3-4 Symbols 4 Outline Winch Assignment 5 Dimensions & Main Specifications : Liftcrane 6 Dimensions & Main Specifications

More information

On the Lee Tunnel project, some significant near misses involving cranes have occurred this year.

On the Lee Tunnel project, some significant near misses involving cranes have occurred this year. On the Lee Tunnel project, some significant near misses involving cranes have occurred this year. Experience has shown that lifting operations can be hazardous work activities if not properly planned.

More information

Heavy Equipment & Rigging Specialist Training

Heavy Equipment & Rigging Specialist Training Heavy Equipment & Rigging Specialist Training Module 1 Unit 4: Intro to Rigging May08 1 Key Points Review of Exercise Goals Discuss Rigging Components Language of Crane Signals Review Anchor Installation

More information

1.0 Purpose: To provide guidelines for selection, usage, inspection and rejection of rigging equipment

1.0 Purpose: To provide guidelines for selection, usage, inspection and rejection of rigging equipment Orignal Issue Date : 28-10-10 Date of Revision: Page- - 1-1.0 Purpose: To provide guidelines for selection, usage, inspection and rejection of rigging equipment (Slings & Ropes) 2.0 Reference: 3.0 Associated

More information

1. SHEWMS DETAILS. Project No. Valid From

1. SHEWMS DETAILS. Project No. Valid From Name of Project Name / Description of Work Activity being undertaken Location at which Activity is being undertaken Name of SHEWMS Owner (Contractor) SHEWMS Owner Business Address Name of person who prepared

More information

Lyftkranar Utbildning av lastkopplare och signalmän (ISO 23853:2004, IDT) Cranes Training of slingers and signallers (ISO 23853:2004, IDT)

Lyftkranar Utbildning av lastkopplare och signalmän (ISO 23853:2004, IDT) Cranes Training of slingers and signallers (ISO 23853:2004, IDT) SVENSK STANDARD Fastställd 2006-03-23 Utgåva 1 Lyftkranar Utbildning av lastkopplare och signalmän (ISO 23853:2004, IDT) Cranes Training of slingers and signallers (ISO 23853:2004, IDT) ICS 03.100.30;

More information

Q-1, as chief officer what are the checking s that you should carry out before using lifting gear? (Risk assessment and risk management)

Q-1, as chief officer what are the checking s that you should carry out before using lifting gear? (Risk assessment and risk management) Lifting Gears Q-1, as chief officer what are the checking s that you should carry out before using lifting gear? (Risk assessment and risk management) Make sure that ship s lifting gear and associate equipments

More information

Operate a bridge or gantry crane (remote operation only)

Operate a bridge or gantry crane (remote operation only) Operate a bridge or gantry crane (remote operation only) Code OHSCER210A Workplace Health and Safety Queensland is moving to a new learning and assessment system for certificates to work in prescribed

More information

8012, 8018 & ,000 LB. CAPACITY HOOK-TYPE CABLE SHEAVES

8012, 8018 & ,000 LB. CAPACITY HOOK-TYPE CABLE SHEAVES OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 80, 808 & 804 8,000 LB. CAPACITY HOOK-TYPE CABLE SHEAVES Read and understand this material before operating or servicing this sheave. Failure to understand

More information

Visit: 45

Visit:  45 Visit: http://www.kwrs.com Type Triangle Choker Nylon or Polyester web slings with alloy steel or alloy aluminum end fittings, for use vertical, choker, and basket hitch applications. Vertical Choker Basket

More information

M&EE Networking Group

M&EE Networking Group Supersedes COP0011 Iss 2 on 03/03/2012 Superseded by COP0011 Iss 4 on 05/12/2015 COP0011 Issue 3 November 2011 Code of Practice for Planning and Executing Lifting Operations M&EE Networking Group No COP0011

More information

PROCEDURE. Operative Date: 22/09/2017 Department: HSE. Revision: 1. Author: D Steel CONTENTS

PROCEDURE. Operative Date: 22/09/2017 Department: HSE. Revision: 1. Author: D Steel CONTENTS PROCEDURE Title: Lifting Equipment - Safe Use Procedure No: P314.421 Issue: 1 Revision: 1 Operative Date: 22/09/2017 Department: HSE Sect./Classification: Safety/Gear & Equipment Author: D Steel Approver

More information

Work Activity (e.g. Road Work): Work Location:.

Work Activity (e.g. Road Work): Work Location:. Working with Cranes Work Activity (e.g. Road Work): Work Location:. GENERAL INFORMATION Hinchinbrook Shire Council Lannercost Street Ingham Qld, 4850 ABN 46 291 971 168 Ph: 47764610 All personnel conducting

More information

SECTION 2. Wire Rope Slings & Bridles

SECTION 2. Wire Rope Slings & Bridles SECTION Wire Rope Slings & Bridles All four of the Coordinated Wire Rope companies specialize in the fabrication of wire rope slings in many different sizes and configurations. The wire rope sling has

More information

LiftAlloy Chain Slings

LiftAlloy Chain Slings CHAIN SLING BASICS Slings Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations. chain slings, available in 80 for 7/8"- /4" and 00 for 7/32"-3/4", are recommended

More information

Section 16B. Fall Protection. Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents:

Section 16B. Fall Protection. Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents: Section 16B. Fall Protection Falls are the second leading cause of death in the workplace. Factors contributing to falling incidents: 1. Personal factors Lack of concentration. Use of medication. Poor

More information

References: EM Section 15 OSHA UFGS

References: EM Section 15 OSHA UFGS References: EM 385-1-1 Section 15 OSHA 1926.251 UFGS 01 35-26 Rigging Safety Rigging equipment shall be inspected as specified by the manufacturer, by a Competent Person, before use on each shift and as

More information

M ANITOWOC M-65 W. 65-MTon liftcrane 6,804 6,124. Courtesy of Crane.Market KG CLAMSHELL KG DRAGLINE

M ANITOWOC M-65 W. 65-MTon liftcrane 6,804 6,124. Courtesy of Crane.Market KG CLAMSHELL KG DRAGLINE M ANITOWOC M-65 W 6,804 KG CLAMSHELL 6,124 65-MTon liftcrane KG DRAGLINE 45 M ANITOWOC M-65 W Outline dimensions 46 M ANITOWOC M-65 W Performance data 47 M ANITOWOC M-65 W Shipping data (all dimensions

More information

PROCEDURE. Revision: 1. Operative Date: 10/04/2018 Department: HSEC. Author: D Steel CONTENTS

PROCEDURE. Revision: 1. Operative Date: 10/04/2018 Department: HSEC. Author: D Steel CONTENTS Title: Lifting Equipment - Inspection and Maintenance PROCEDURE Procedure No: P314.420 Issue: 1 Revision: 1 Operative Date: 10/04/2018 Department: HSEC Sect./Classification: Safety/Gear & Equipment Author:

More information

USER S GUIDE LIFTING TERMINOLOGY

USER S GUIDE LIFTING TERMINOLOGY USER S GUIDE LIFTING API RP2D Version (06/06) REFER TO API RP2D FOR FULL DETAILS RISK MANAGEMENT DEFINITION COMPREHENSIVE SET OF ACTIONS THAT REDUCES THE RISK OF A PROBLEM, A FAILURE, AN ACCIDENT Quality

More information

Lifting Operation & Lifting Equipment Procedure

Lifting Operation & Lifting Equipment Procedure SRSS Lifting Equipment Procedure 1. DOCUMENT CONTROL Management System Element Title SRSS SMS PROCEDURE Lifting Operation & Lifting Equipment Procedure SMS_HS_PR_033_ Version # & V1 10/08/2016 Lifting

More information

TLILIC2005A Licence to operate a boomtype elevating work platform (boom length 11 meters or more)

TLILIC2005A Licence to operate a boomtype elevating work platform (boom length 11 meters or more) TLILIC2005A Licence to operate a boomtype elevating work platform (boom length 11 meters or more) Release: 1 TLILIC2005A Licence to operate a boom-type elevating work platform (boom length 11 meters or

More information

Hydraulic lift crane. Complies with ANSI/ASME B 30.5 LR enus LR

Hydraulic lift crane. Complies with ANSI/ASME B 30.5 LR enus LR Hydraulic lift crane LR 1110 Complies with ANSI/ASME B 30.5 enus LR 1001.02 Concept and characteristics LR 1110 Standard Excellent lifting capacities thanks to optimized distribution of forces New cabin

More information

Visit: 27

Visit:  27 Visit: http://www.kwrs.com 7 SINGLE PART SLINGS Eyes are typically formed using a flemish eye splice. The ends are secured by pressing a metal sleeve over the ends of the strands of the splice. Pull follows

More information

M S I C R A N E S C A L E

M S I C R A N E S C A L E 2 M E A S U R E M E N T S Y S T E M S I N T E R N A T I O N A L Table of Contents Forward...3 Safe Operating Guidelines...4 Operating Suggestions...4 Handling Hoist Motion...4 Safe Loading and Rigging

More information

Operate non slewing mobile cranes (less than three tonnes capacity)

Operate non slewing mobile cranes (less than three tonnes capacity) Operate non slewing mobile cranes (less than three tonnes capacity) Code Workplace Health and Safety Queensland is moving to a new learning and assessment system for certificates to work in prescribed

More information

Rigging Safety. 1 Copyright 2014 by PEC Safety Management, Inc. PPT-SM-RIGGING 2014

Rigging Safety. 1 Copyright 2014 by PEC Safety Management, Inc. PPT-SM-RIGGING 2014 Rigging Safety 1 Copyright by PEC Safety Management, Inc. Rigger Role Assist the crane operator by properly attaching and detaching loads the crane Know how to safely connect and disconnect loads Discuss

More information

Ⅱ-14.Installing precast concrete exterior wall panels

Ⅱ-14.Installing precast concrete exterior wall panels Ⅱ-14.Installing precast concrete exterior wall panels Ⅱ-15.Slate roof work 1. Are precast concrete panel hooks in normal condition? 2. Have fall prevention measures been taken under the installation site?

More information

MANITOWOC MODEL TON CAPACITY

MANITOWOC MODEL TON CAPACITY LIFTING CHARTS - Crawler Cranes ANITOWOC ODEL - 0 TON CAPACITY BOO RIGGING GUIDE ODEL AND # EL BOO Table of Contents General... Assist Crane Requirements... Accessing Parts... Installation and Removal

More information

OMG Southeast & Southwest RIGGING SAFETY PROGRAM (29 CFR Part , , , , , & ANSI B30.5, ANSI B30.

OMG Southeast & Southwest RIGGING SAFETY PROGRAM (29 CFR Part , , , , , & ANSI B30.5, ANSI B30. OMG Southeast & Southwest RIGGING SAFETY PROGRAM (29 CFR Part 1926.251, 1926.550, 1910.180, 1910.184, 1910.330, & ANSI B30.5, ANSI B30.8) Nearly every project is required to perform some type of rigging

More information

View thousands of Crane Specifications on FreeCraneSpecs.com. MANITOWOC M-85W 95-Ton liftcrane 20,000 lb CLAMSHELL 18,000 lb DRAGLINE

View thousands of Crane Specifications on FreeCraneSpecs.com. MANITOWOC M-85W 95-Ton liftcrane 20,000 lb CLAMSHELL 18,000 lb DRAGLINE MANITOWOC M-85W 95-Ton liftcrane 20,000 lb CLAMSHELL 18,000 lb DRAGLINE 94 MANITOWOC M-85W Outline dimensions 95 MANITOWOC M-85W Performance data 96 MANITOWOC M-85W Shipping data (all dimensions length

More information

Health and Safety Program Inspections

Health and Safety Program Inspections POLICY: It is CPP s policy to maintain a program of safety inspections. The objective of this program is to control and mitigate hazards in the workplace and worksite. All CPP s facilities and worksites

More information

Transfer Chain (SA-1002) & Adjustable I-Beam Clamp (SA-1039 or SA-1040) Operating Instructions

Transfer Chain (SA-1002) & Adjustable I-Beam Clamp (SA-1039 or SA-1040) Operating Instructions Transfer Chain (SA-1002) & Adjustable I-Beam Clamp (SA-1039 or SA-1040) Operating Instructions SPIDER Page 1 of 8 702127 Rev A Using Transfer Chain with Adjustable I-Beam Clamp Safety Notes Do not use

More information

LOAD CHARTS RT640C 85% STABILITY ON OUTRIGGERS 75% STABILITY ON RUBBER

LOAD CHARTS RT640C 85% STABILITY ON OUTRIGGERS 75% STABILITY ON RUBBER LOAD CHARTS RT6C 85% STABILITY ON OUTRIGGERS 75% STABILITY ON RUBBER SERIAL NUMBER 1 NOTES FOR LIFTING CAPACITIES GENERAL: 1. Rated loads as shown on lift chart perta to this mache as origally manufactured

More information

National 400B. Certification CraneSafe Certification. CraneSafe + Fulford Harbour Group Tel:

National 400B. Certification CraneSafe Certification. CraneSafe + Fulford Harbour Group Tel: Load Chart PRACTICE Exercises Stiff TRUCK CRANE 40 Tonnes & under National 400B Stiff Boom Truck 40 Tonnes & Under PRACTICE EXERCISES LCR.SB40.NA400B.PE1 30 July 2009 + Fulford Harbour Group Tel: 604.952.6033

More information

Technical data Hydraulic lift crane. LR 1300 sx LR 1300

Technical data Hydraulic lift crane. LR 1300 sx LR 1300 Technical data Hydraulic lift crane LR 1300 sx LR 1300 Dimensions Basic machine with undercarriage R 9750 30 10350 6930 3000 LR 1300 2250 10 5000 1465 1700 8500 9650 42 1870 10 00 0 R 69 Optional: Flat

More information

SECTION 15 RIGGING. b. Defective rigging shall be removed from service.

SECTION 15 RIGGING. b. Defective rigging shall be removed from service. SECTION 15 RIGGING 15.A GENERAL 15.A.01 Inspection and use. a. Rigging equipment shall be inspected as specified by the manufacturer, by a Competent Person, before use on each shift and as necessary during

More information

Technical data Hydraulic lift crane LR 1300 SX

Technical data Hydraulic lift crane LR 1300 SX Technical data Hydraulic lift crane LR 1300 SX Dimensions Basic machine with undercarriage R 9750 30 10350 6930 3000 2250 10 5000 1465 1700 8500 9650 42 1870 10 00 0 R 69 1485 00 365 85 1500 8300 0 Operating

More information

IMCA Competence Assessment Portfolio April 2016

IMCA Competence Assessment Portfolio April 2016 Self- Checklist Entry Level Criteria Acceptance Criteria Attained Completed diver training to IMCA-recognised air diver qualification Passed medical examination for fitness to dive Passed offshore survival

More information

Duties of WAH Competent Persons

Duties of WAH Competent Persons Duties of WAH Competent Persons Who Are theses Stakeholders? What are their Roles and Responsibilities in WAH Activities? Presented By James Tay B.K. 12th Dec 2013 1 Source from OCH Division, MOM 31 st

More information

LiftAlloy TM Chain Slings

LiftAlloy TM Chain Slings LiftAlloy TM LiftAlloy CHAIN SLING BASICS Lift-All chain slings meet or exceed all OSHA, ASME B30.9 and NACM standards and regulations LiftAlloy chain slings, available in grade 00 for 7/32" through 3/4",

More information

Cranes. Upon Completion. Subpart N. Participants will understand: » Scope of the new standard. » General overview including:

Cranes. Upon Completion. Subpart N. Participants will understand: » Scope of the new standard. » General overview including: Cranes Subpart N Upon Completion Participants will understand:» Scope of the new standard» General overview including:» Role of the Controlling Contractor,» Predictable hazards in the workplace,» Barricades

More information

LR Technical data Hydraulic lift crane. Complies with ANSI B Courtesy of Crane.Market

LR Technical data Hydraulic lift crane. Complies with ANSI B Courtesy of Crane.Market Technical data Hydraulic lift crane LR Complies with ANSI B 0.5 Dimensions Basic machine with undercarriage The operating weight includes the basic machine with crawlers, main winches,00 and ft main boom,

More information

View thousands of Crane Specifications on FreeCraneSpecs.com LR 1300 SX. Technical data Hydraulic lift crane LR 1300

View thousands of Crane Specifications on FreeCraneSpecs.com LR 1300 SX. Technical data Hydraulic lift crane LR 1300 Technical data Hydraulic lift crane LR 1300 SX LR 1300 Dimensions Basic machine with undercarriage R 9750 30 10350 6930 3000 LR 1300 5000 2250 10 1465 1700 8500 9650 42 1870 10 00 0 R 69 Optional: Track

More information

This training session focuses on safe rigging for crane and derrick operations at construction sites. A critical job for the safety of any crane or

This training session focuses on safe rigging for crane and derrick operations at construction sites. A critical job for the safety of any crane or This training session focuses on safe rigging for crane and derrick operations at construction sites. A critical job for the safety of any crane or derrick operation is rigging the load. A poor rigging

More information

S-60-TO : 1 ton tower system INSTRUCTION MANUAL

S-60-TO : 1 ton tower system INSTRUCTION MANUAL S-60-TO : 1 ton tower system INSTRUCTION MANUAL LIVE SYSTEMS bvba Mandellaan 282 8800 B-Roeselare Tel: +32(0)51 69 38 14 Mobile : +32 (0) 495 24 24 67 e-mail: ricky@livesystems.be BTW : 0859.636.665 1

More information

2016 OFFSHORE TRAINING AND ASSESSMENT SERVICES

2016 OFFSHORE TRAINING AND ASSESSMENT SERVICES 2016 OFFSHORE TRAINING AND ASSESSMENT SERVICES INTRODUCTION ILS is a specialist training and assessment provider operating on a global basis in the offshore oil and gas industry. Our specialist services

More information

Section 15 TABLE OF CONTENTS Rigging. 15.A General B Personnel Qualifications

Section 15 TABLE OF CONTENTS Rigging. 15.A General B Personnel Qualifications Section 15 TABLE OF CONTENTS Rigging Section: Page 15.A General... 15-1 15.B Personnel Qualifications... 15-2 15.C Multiple Lift Rigging (MLR) ( Christmas Tree Rigging )... 15-3 15.D Slings... 15-5 15.E

More information

Wheeler Cranes 6 McIntyre Rd Tomago NSW 2324

Wheeler Cranes 6 McIntyre Rd Tomago NSW 2324 Wheeler Cranes 6 McIntyre Rd Tomago NSW 2324 ABN: 34 088 229 190 This SWMS has been developed and authorised by: Name Albie Wheeler Position Managing Director Date 1/7/12 Signature Phone 0249649991 Mobile

More information

Session Objectives. Business & Legal Reports, Inc. 1011

Session Objectives. Business & Legal Reports, Inc. 1011 Crane Rigging Cranes are old devices the ancient Greeks and Romans designed cranes to lift and move heavy objects. Buildings such as the Roman Colosseum and the medieval cathedrals of Europe were built

More information

Cranes and Hoists. Elevating Work Platforms ASSESSMENT

Cranes and Hoists. Elevating Work Platforms ASSESSMENT Cranes and Hoists Elevating Work Platforms ASSESSMENT Part 1 Part 2 Performance Oral/Written June 1995 Contents Page Assessor guidelines general guidelines for Schedule B i Part one Performance Assessment

More information

8. Fall Protection Procedures WAC

8. Fall Protection Procedures WAC 1.0 Fall Protection Introduction 8. Fall Protection Procedures WAC 296-155-245 If an employee is exposed to a fall hazard of ten (10) feet or more in height, the employee must use a fall restraint, fall

More information

Training for the Drilling Industry Order sets online at

Training for the Drilling Industry Order sets online at Training for the Drilling Industry Order sets online at www.graphicsafety.com Drilling Rig Hazard Recognition This workbook teaches hazard recognition by illustrating scenes and requiring student/employees

More information

Versie Date: USAGE AND SAFETY MANUAL SPREADERBEAMS

Versie Date: USAGE AND SAFETY MANUAL SPREADERBEAMS USAGE AND SAFETY MANUAL SPREADERBEAMS 1. INTRODUCTION: The spreader system exists of modular traverses with possibility of different spans. Each spreaderbeam exists of two head section complete with shackles

More information

Rigging. Student Booklet

Rigging. Student Booklet Student Booklet Ministry of Education. December 2009. The material was developed for Continuing Education Committee for the building / construction industry and in cooperation with lecturer Ole Østergaard

More information