LR Technical data Hydraulic lift crane. Complies with ANSI B Courtesy of Crane.Market

Transcription

1 Technical data Hydraulic lift crane LR Complies with ANSI B 0.5

2 Dimensions Basic machine with undercarriage The operating weight includes the basic machine with crawlers, main winches,00 and ft main boom, consisting of A frame, boom foot ( ft), boom head ( ft), boom extension (0 ft) 88,500 basic counterweight, 79,0 carbody counterweight and,0 hook block. Total weight appr. 494, PSI. Crane standing on firm, horizontal ground.. The weight of the lifting device (hoisting ropes, hook block, shackle etc.) must be deducted from the gross lifting capacity to obtain a net lifting value. 5. For max. wind speed please refer to lift chart in operator s cab or manual. 6. Working radii are measured from centre of swing and under load. Main boom (No..xx) max. length High reach (No..xx and 96.xx) Luffing jib (No. 96.xx) max. length Max. combination Fixed jib (No. 008.xx) Auxiliary jib 50 lifting capacity. The lifting capacities stated are valid for lifting operation only (corres ponds with crane classification according to F.E.M..00, crane group A) 4. Additional equipment on boom (e.g. boom walkways, auxiliary jib) must be deducted to get the net lifting capacity. Ground bearing pressure 96 ft 9 ft ft boom 8 ft and luffing jib ft 6 ft ft 7. The lifting capacities are valid for degrees of swing. 8. Calculation of stability under load is based on % tipping load, ANSI B 0.5 and ISO 5 Table. 9. The structures are calculated according to F.E.M (EN 00 / 4) and tested according to SAE J 987. LR

3 Transport dimensions and weights Basic machine and boom (No..xx) Basic machine with A frame, x,00 crane winches including wire ropes (max. 8 ft, without crawlers, boom foot, basic counterweight and carbody counterweight 9 0 Weight in 9,700 Crawler x Flat track shoes Weight in ,00 Boom foot (No..0) Weight in with luffing jib winch* Weight in without luffing jib winch* Boom section 8, 8,80 0 ft (No..4) Weigh in * 8,500 Boom section 0 ft (No..4) Weight in * 8 4,5 Boom section 8 ft () Weight in * Boom head 8 6,0 (No..4) Weight in * 8 0,0 Transport option Boom transport option No..xx/96.xxx Length Weight in * 8 / 4 9,00 0 / ,0 0 /0 0 8,700 *) Including pendant straps LR

4 Transport dimensions and weights Luffing jib (No. 96.xx) Luffing jib head (No. 96.) Weight in * 6 9,0 L - boom jib section ft (No. 96.) Weight in * 6 9,00 Luffing jib section 0 ft (No. 96.8) Weight in * 6 9,0 Luffing jib section 0 ft (No. 96.8) Weight in * 6 9,50 Luffing jib section ft (No. 96.8) Weight in * 6 9,7 Luffing jib foot with A-frames (No. 96.) Weight in * 6 9 4,0 L - boom section tapered (No. /96.0) ft Weight in * Fixed jib 7 5, (No. 008.xx) Fixed jib head (No ) Weight in * Fixed jib section,0 (No ) 0 ft Weight in * Fixed jib section 4. 0 (No ) 0 ft Weight in * Fixed jib foot with A-frame Weight in * 4.,00 (No ) 59 4,00 *) Including pendant straps 4 LR

5 Transport dimensions and weights Counterweight x Weight in 5 5 9,00 Counterweight x Weight in 5 5,70 Counterweight 0x Weight in 4 6,50 Carbody counterweight 4x Weight in. 9,0 Mid fall section.64 ft (No. 96.) Weight in 9.5,0,0 hook block - sheaves Weight in 4.6 7, ,0 0,700 hook block - 5 sheaves Weight in 9.7, ,. 8,0,500 hook block - sheaves Weight in.4,0 9 4, ,0 0, hook block - sheave Weight in,0 6.,500. 5,00 5,00 single hook Weight in 9.7,000 LR 5

6 Technical Engine Main winches Power rating according to ISO 949, 0 kw ( HP) at 0 rpm Engine type Liebherr D 08 A7 Fuel tank 8 gal capacity with continuous level indicator and reserve warning Engine complies with NRMM exhaust certification EPA / CARB Tier and 97/68 EC Stage III Hydraulic system An axial displacement pump supplies the open loop hydraulic system for boom luffing, jib luffing and travel. The main hoist winches and swing are operated in a closed loop system. All functions can be operated simultaneously. To minimize peak pressure an automatic working pressure cut off is integrated in a pump. All filters are electronically monitored. The use of synthetic environmentally friendly (biodegradable) oils is possible. Working pressure max PSI Oil tank capacity 8 gal max. 47,0 Line pull (st layer) Line pull (7th layer),00 Rope diameter 8 mm Drum diameter 8.7 inch Rope speed ft/min 0,870 ft Rope capacity in 7 layers The winches are outstanding in their compact design and easy assembly. Propulsion is via a planetary gearbox in an oil bath. Load support by the hydraulic system; additional safety factor provided by a spring loaded, multi disc holding brake. The main winches use pressure controlled, variable flow hydraulic motors. This system features sensors that automatically adjust oil flow to provide max. winch speed depending on load. Option winch with freefall system: Clutch and braking functions on the freefall system are provided by a compact designed, low wear and maintenance free multi disc brake. Crawlers Propulsion through axial piston motor, hydraulically released spring loaded multi disc brake, crawler tracks, hydraulic chain tensioning device. Flat track shoes 47. inch Drive speed mph Luffing jib winch Line pull Rope diameter Jib luffing max.,50 0 mm 5 sec. from 5º to 78º Boom winch Line pull Rope diameter Boom up max. 48,000 4 mm 7 sec. from 5º to 86º Control The control system developed and manufactured by Liebherr is designed to withstand extreme environmental conditions such as temperature, vibration and electromagnetic interference and to meet all requirements that are needed in heavy duty crane operation. Complete machine operating data are shown on a high resolution display. Standard operational information is displayed by means of graphical symbols, fault indications are displayed in plain text (more than 5 languages available). The cranes are equipped with proportional control for all main movements, which can be carried out simultaneously. The crane is operated with multi directional joysticks, the right for winch I and boom, the left for winch II and swing control. Option: Bi directional double T levers for simultaneous boom and luffing jib operation. The crawlers are activated by the two central foot pedals. Additionally, hand levers can be attached to the pedals. Remote control for assembly of counterweight and boom hinge pins. Swing Consists of rollerbearing with external teeth, swing drive with fixed axial piston hydraulic motor, spring loaded and hydraulically released multi disc holding brake, planetary gearbox and pinion. Both swing modes are possible speed control or free swing. A multi disc holding brake acts automatically at zero swing motion. Swing speed from 0.8 rpm continuously variable. 6 Noise emission Noise emissions correspond with 0/4/EC directive on noise emission by equipment used outdoors. LR

7 Boom combinations 7 m ( ft) No. 96. m ( ft) No m ( ft) No m ( ft) No. 96. m ( ft) No. 96. m ( ft) No m ( ft) No m ( ft) No m (.64 ft) Mid fall No m (8 ft) No m ( ft) No m (0 ft) No m ( ft) No..4 6 m (0 ft) No m ( ft) No m (8 ft) m (0 ft) No m (8 ft) No m ( ft) No..4.7 m (8 ft).7 m (8 ft).7 m (8 ft).7 m (8 ft) 6 m (0 ft) No m (0 ft) No m (8 ft) m ( ft) Tapered No. /96..7 m (8 ft) m ( ft) No m ( ft) No m (8 ft) m ( ft) No m (8 ft) No m ( ft) No..4.7 m (8 ft).7 m (8 ft).7 m (8 ft).7 m (8 ft).7 m (8 ft).7 m (8 ft).7 m (8 ft) 6 m (0 ft) 7 m ( ft) No..0 Main boom No..xx 96 ft 6 m (0 ft) No..4 m (0 ft) No..4 7 m ( ft) No..0 Max. combination Main boom No..xx Tapered No. /96.xx Luffing jib No. 96.xx.7 m (8 ft).7 m (8 ft) 9 ft 68 ft ft 8 ft 7 m ( ft) No..0 Max. combination Main boom No..xx Fixed jib No. 008.xx 6 m (0 ft) No..4 ft 8 ft ft 7 m ( ft) No..0 Max. combination Main boom No..xx Luffing jib No. 96.xx Main boom No..xx Luffing jib No. 96.xx 49 ft 8 ft ft 9 ft 4 ft LR 7

8 Self assembly system Unloading of basic machine Unloading and assembly of crawlers Unloading and assembly of carbody counterweight Unloading and assembly of boom Unloading and assembly of counterweight Unloading and assembly of boom foot 8 LR

9 Erecting of main boom to working position Assembly of boom Reeving of hoist and luffing jib ropes Erecting of main boom and luffing jib Working position LR 9

10 Working range - main boom 86-5 (No..xx) 88,500 counterweight and 79,0 carbody counterweight Auxiliary jib,50 The maximum capacity of the auxiliary jib is,50 The corresponding load chart is programmed in the LMI system. Main boom configuration (Table No..xx) Configuration for boom lengths ( ft 96 ft) Length Boom foot ft Boom insert 0 ft* Boom insert 0 ft* Boom insert 8 ft* Boom head ft Boom length in (ft) Amount of boom extensions *Actual lengths of boom sections are metric (e.g. m, 6 m,.7 m). The figures shown above are approximate conversions to feet. 0 LR

11 Lift chart for main boom (No..xx) Capacities in 000 for boom lengths ( ft 96 ft) with,00 winches 88,500 counterweight and 79,0 carbody counterweight Boom length in (ft) Radius Radius (ft) (ft) Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator s cab or manual. LR

12 L - boom high reach (No. / 96.xx) 4 ft - 9 ft Working range 84-5 L - boom configuration with 68 ft main boom (No..xx / No. 96.xx) Configuration for L boom lengths (4 ft 9 ft) Length Boom foot ft Boom insert 0 ft* Boom insert 0 ft* Boom insert 8 ft* Tapered ft* Luffing insert 0 ft* Luffing insert 0 ft* Luffing insert ft* Luffing jib head 6 ft* Max. L boom length (ft) Amount of boom and luffing jib extensions *Actual lengths of boom sections are metric (e.g. m, 6 m, 8 m,.7 m, m). The figures shown above are approximate conversions to feet. LR

13 Lift chart for L (No. / 96.xx) Capacities in 000 for L boom lengths (4 ft 9 ft) with,00 winches 88,500 counterweight and 79,0 carbody counterweight Radius (ft) Boom length in (ft) Radius (ft) Above lift chart is for reference only. For actual lift duty please refer to lift chart in operator s cab or manual. LR

14 Working range - luffing jib (No. 96.xx) 78-5 Main boom 88 Boom configuration for main boom lengths (84 ft - 99 ft) see table on page 0 Jib configuration for jib lengths ( ft - ft) Luffing jib foot Luffing jib insert Luffing jib insert Luffing jib insert Luffing jib head Luffing jib length (ft) Length ft 0 ft* 0 ft* ft* ft Amount of luffing jib extensions *Actual lengths of boom sections are metric (e.g. m, 6 m, 7 m, m). The figures shown above are approximate conversions to feet. 4 LR

15 Lift chart - tower crane (No. 96.xx) Main boom angle 88 Main boom 84 ft Main boom ft Main boom 4 ft Main boom 8 ft Main boom 99 ft Main boom 6 ft Capacities in 000 with luffing jib (No. 96.xx) 88,500 counterweight + 79,0 carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 5

16 Lift chart (No. 96.xx) Capacities in 000 with luffing jib (No. 96.xx) 88,500 counterweight + 79,0 carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 6 LR

17 Lift chart (No. 96.xx) ft ft ft ft ft ft Capacities in 000 with luffing jib (No. 96.xx) 88,500 counterweight + 79,0 carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 7

18 Lift chart (No. 96.xx) Capacities in 000 with luffing jib (No. 96.xx) 88,500 counterweight + 79,0 carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. 8 LR

19 Lift chart (No. 96.xx) Capacities in 000 with luffing jib (No. 96.xx) 88,500 counterweight + 79,0 carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR 9

20 Working range - ixed jib 5 and 0 (No. 008.xx) Main boom 88-0 Boom configuration for boom lengths ( ft - 48 ft) see table on page 0 Fixed jib configuration for fixed jib lengths (6 ft - ft) Length Fixed jib foot 8 ft Fixed jib insert 0 ft* Fixed jib insert 0 ft* Fixed jib head 8 ft Fixed jib length (ft) Amount of fixed jib extensions 6 56 *Actual lengths of boom sections are metric (e.g. m, 6 m). The figures shown above are approximate conversions to feet. 0 LR

21 Lift chart - f (No. 008.xx) Capacities in 000 with fixed jib (No. 008.xx) 88,500 counterweight + 79,0 carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR

22 Lift chart - f (No. 008.xx) ft ft ft ft Capacities in 000 with fixed jib (No. 008.xx) 88,500 counterweight + 79,0 carbody counterweight. Above lift chart is for reference only. For actual lift duty and complete chart with all available configurations please refer to lift chart in operator s cab or manual. LR

23 Notice LR

24 LR 0 0/8 Subject to change without notice. Liebherr-Werk Nenzing GmbH P.O. Box 0, A-670 Nenzing/Austria Tel.: Fax: crawler.crane@liebherr.com Powered by TCPDF (