HOMOLOGERINGSBLAD KARTING TM Racing 60cc - Junior 60 Utgåva 2 Sida 1/21 Publiceringsdatum / Giltig t.o.m /

HOMOLOGATION OF KART ENGINE

HOMOLOGATION OF KART ENGINE Category ROTAX SENIOR MAX Manufacturer Bombardier Rotax Model FR125 UK Agent JAG Engineering Valid From 1 st June 2011 Number of pages 21 This Homologation Form reproduces descriptions,

HOMOLOGATION OF KART ENGINE

HOMOLOGATION OF KART ENGINE ROTAX SENIOR MAX Valid From 1 st June 2011 Number of pages 21 This Homologation Form reproduces descriptions, illustrations and dimensions of the engine at the moment of the

TECHNICAL DATA - ENGINE 89

TECHNICAL DATA - ENGINE 89 13 TECHNICAL DATA - ENGINE Design Displacement (all 400 models) Displacement (all 450 models) Displacement (all 530 models) Stroke (all 400 models) Stroke (all 450 models) Stroke

ROTAX MAX Challenge Technical Regulations 2004 (Version )

APPROVED ROTAX MAX Challenge Technical Regulations 2004 (Version 02.03.2004) 1. Categories: Karts used in the ROTAX MAX CHALLENGE (RMC), ROTAX MAX CHALLENGE GRAND FINAL (RMCGF) and INTERNATIONAL ROTAX

SpeciÞcations. Engine Dimensions Dimensions in millimeters. Inch equivalents shown in [].

SpeciÞcations Engine Dimensions Dimensions in millimeters. Inch equivalents shown in []. Ê ßÔ Ê ÛÝ Ñ Ê Û ÎÊ Û É 5 ENGINE IDENTIFICATION NUMBERS Kohler engine identiþcation numbers (model, speciþcation

TECHNICAL REGULATIONS / CLASSES 2019

TECHNICAL REGULATIONS / CLASSES 2019 Cadets Comer: 1 Engine Eligibility: The only engines approved for use in this class are; COMER SW80 with Technical Specifications that form part of these rules. Yamaha

Flow control valves Series RFU - RFO 2/

CATALOGUE > Release 8.5 > Valves Series RFU - RFO Flow control valves Series RFU - RFO Unidirectional and bidirectional flow control valves Ports: M5, G1/8, G1/4, G3/8 and G1/ Nominal diameter: M5 = 1,5

K Page 1 of 48 Air Intake - Pg. 17

K532-53168 Page 1 of 48 Air Intake - Pg. 17 Ref # Part Number Qty Description 24 25 041 06-S 1 Gasket, elbow 25 48 054 09 1 Elbow, air cleaner Discontinued not available at Kohler Co. 35 277116-S 1 Brace,

GLOBAL RMC Technical Regulation GLOBAL. Rotax MAX Challenge Technical Regulation Edition Content

GLOBAL Rotax MAX Challenge Technical Regulation 2019 Edition 2019 10 25 Content 1. General... 2 2. Equipment... 2 3. Engine sealing, Scrutinizing... 5 4. Engine modifications, repairs and additions...

ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY

2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 1 of 52 A-ARM, FLOOR PANEL, AND BUMPER ASSEMBLY 2004 ATV 90 Y-12 YOUTH 2-STROKE RED (A2004ATB2BUSR) Page 2 of 52 A-ARM, FLOOR PANEL, AND BUMPER

ALUMINIUM TANK AND COMPENSATOR - SERIES 09

ALUMINIUM TANK AND Series 09 has been extended with the addition of an air/oil compensator. The Ø100 air/oil compensator consists of two aluminium flanges and an anodized jacket with an ISO profile, all

TECHINCAL REGULATIOINS MICRO MAX / MINI MAX / JUNIOR MAX

ROTAX MAX MOJO CHALLENGE GRAND FINALS 2018 TECHINCAL REGULATIOINS MICRO MAX / MINI MAX / JUNIOR MAX This english version is the official Sporting Regulations approved and published by CBA The Event shall

Pressure booster. Air Service Units Series Page. General 5.1. Pressure boosters ø Pressure boosters ø 40 c/w air pressure regulator 5.

Series 17 Pressure booster Page General Pressure boosters ø 4 Pressure boosters ø 4 c/w air pressure regulator Pressure booster ø 63 Pressure booster ø 63 c/w air pressure regulator Pressure booster ø

Wide opening parallel grippers Series CGLN

CATALOGUE > s 202 Wide opening parallel grippers Series CGLN > Grippers Series CGLN Magnetic Sizes: ø 0-6 - 20-25 - 32 mm» High flexibility during mounting» High grip force» Rack and pinion synchronized

Bores: ø 10, 16, 20, 25, 32 mm

> Series CGLN wide opening parallel grippers CATALOGUE > Release 8.8 Series CGLN wide opening parallel grippers New version Bores: ø 0, 6, 20, 25, 32 mm»» High installation versatility»» Rack and pinion

safety Shut-Off Valve HON 721

safety Shut-Off Valve HON 7 product information serving the gas industry worldwide safety shut-off valve HON 7 safety shut-off valve HON 7 Application, Characteristics, Technical Data Application safety

Rotax 125 MAX Adjustable Variable Exhaust

Rotax 125 MAX Adjustable Variable Exhaust Introduction: This information is in addition to the valid repair manual. Safety requirement has to be taken from the valid repair manual. This information is

55DEHD 07 (63S5) 1F63S-561E1

55DEHD 07 () 1F63S-561E1 ( ) 55DEHD PARTS CATALOGUE 2006 by Yamaha Motor Co., Ltd. 1st edition, November 2006 All rights reserved. Any reprinting or unauthorized use without the written permission of Yamaha

FIM Road Racing World Championship Grand Prix

PRESS RELEASE MIES,06/11/10 FOR MORE INFORMATION: ISABELLE LARIVIÈRE PRESS OFFICER isabelle.lariviere@fim.ch TEL +41 22 950 95 68 FIM Road Racing World Championship Grand Prix Decision of the Grand Prix

VORTEX ROK DVS ENGINES ANNOUNCED FOR AUSTRALIA FROM 2016

VORTEX ROK DVS ENGINES ANNOUNCED FOR AUSTRALIA FROM 2016 As announced recently by Karting Australia, the Vortex Rok DVS engine will be introduced for competition in Australia from January 2016. The new

Tapped Hole (.375) Tapped hole 15 (.594) (.391±.004) Frame 19±0.2 (.750±.008) 12.7±0.2 (.500±.008) 19±0.2 (.750±.008) R S 4 x Ø 5.4 (.

434 Lift-off In-line Zinc can also be 31.5 19.1 (.750) For Lift-Off For on Lift-Off 1300 (300 lbf) 2200 (500 lbf) 56 T.P.I. (2.21) 31.5 19.1 (.750) Tapped hole Ø 9.5 (.375) ultimate 3300 (750 lbf) 9300

Series MX pressure regulators 3/

CATALOGUE > Release 8.8 > Series MX regulators Series MX pressure regulators MX2 ports: G/8, G1/2, G/4 - MX ports: G/4, G1 Manifold ports: G1/2 (MX2 only) Modular - Available with built-in pressure gauges

INSTRUCTIONS & MAINTENANCE SHEET PORTABLE HYDRAULIC PUNCHING HEAD PH045

INSTRUCTIONS & MAINTENANCE SHEET PORTABLE HYDRAULIC PUNCHING HEAD PH045 V05.2013 DECLARATION OF CONFORMITY 2 1. TECHNICAL CHARACTERISTICS Maximum punching capacity: Min / Max. hole diameter: Max. yield

Guideline No.M-05(201510) M-05 AIR COMPRESSOR. Issued date: 20 October China Classification Society

Guideline No.M-05(201510) M-05 AIR COMPRESSOR Issued date: 20 October 2015 China Classification Society Foreword This Guideline constitutes the CCS rules, and establishes the applicable technical requirements

Description Total stroke Maximum Recommended Page in mm gripping force in N workpiece weight in kg

Overview parallel gripper Description Total stroke Maximum Recommended Page in mm gripping force in N workpiece weight in kg Version 1 2 1 2 1 2 RRP-A 64 12 6 240 450 1,2 2,2 26 80 16 8 380 700 1.9 3.5

DICTATOR "DIREKT" Gate Closer

DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the controlled closing of outside gates, such as admission gates to kinder

smartdraft TM Tap & One-way beer line Infosheet

smartdraft TM Tap & One-way beer line Infosheet smartdraft Tap & One-Way Beer Line Infosheet Dimensions: Tap: One-way beer line: Weight: Tap: One-way beer line: Pressure: Standard: Tolerance: Other on

REGULATIONS AND SPECIFICATIONS FOR THE 2018 WESTERN CAPE REGIONAL 150 JUNIOR SHORT CIRCUIT MOTORCYCLE CHAMPIONSHIP

REGULATIONS AND SPECIFICATIONS FOR THE 2018 WESTERN CAPE REGIONAL 150 JUNIOR SHORT CIRCUIT MOTORCYCLE CHAMPIONSHIP MSA WESTERN CAPE MOTORSPORT CIRCULAR WC 13/2018 These regulations are to be read in conjunction

Leak free Pipe Rupture Valve for Excavators

Leak free Pipe Rupture Valve for xcavators Series motion and progress Reference: 3 P 9575 1/11.6 Classification: 43.325.355...325.35 1/17 Contents Page 1 General description................................................................

Air Saving Valve reduction in 40% air consumption 40% air consumption Air consumption reduction ratio (%) Flow valve Flow valv

CAT.ES-173 A Air Saving Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction ratio (%) 3 1.1.1...3 pressure

PART NO. DESCRIPTION QTY. REMARKS PRICE

ENGINE RA171989K1 INSULATOR, E/G & /M MOUNT 02 RUBBER HARDNESS = HS90 27,00 RA197518K1 INSULATOR, E/G ROLL (FRONT) 01 RUBBER HARDNESS = HS90 27,00 RA554855K1 INSULATOR, E/G Roll (REAR) 01 RUBBER HARDNESS

Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8

Directional Control Valves Series VA13 and VA15 3- and 5-port valves, G1/8 Catalogue 9127003472GB-ul VA13 and VA15 Directional Control Valves Robust 3- and 5-port valves with brass bodies and stainless

Calibrated or locked versions available. TREATMENT > Series MD regulators GENERAL DATA. New

> Series MD regulators Series MD pressure regulators New Ports with interchangeable cartridges: threaded (1/8, 1/4, /8) or integrated with super-rapid fitting for tube with Ø 6, 8 and 10 mm Versions: single,

CKL2 Series. Powerful chuck. Operational stroke length: 5, 6, 8, 10, 12, 16, 20, 23mm. Specifications. Switch specifications

RV* FH1 G B FH G A S Specifications Descriptions Size Cylinder bore size mm Working fluid Max. working pressure MPa Min. working pressure MPa Ambient temperature C Port size Operational stroke length mm

Kart Technical Exception Class Approval

Kart Technical Exception Class Approval Ref: KTE-2014-223 The MSA can confirm that J.A.G. Engineering / ABkC has been granted permission to run the Rotax 125 Max DD2 Class in the UK. Class Regulations

TECHNICAL DESCRIPTION

TECHNICAL DESCRIPTION Exhaust Hose Reel ser. 865, electric motor driven No. 981118101 Description Limit switches, for hose coiling and uncoiling integrated in drive unit. Motor turns drum via a planetary

Special square punch with flattened corners

Special square punch with flattened corners Mild steel (St37), plastic and aluminium to 2.0 Punching of burr-free openings 12.7 dia pilot drill 503102 Punch including punch, die, draw stud, counter nut

SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS FC2145 W,

SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS FC2145 W, 2010-09 ACCESSORIES FC2145 W, 2010-09 ACCESSORIES FC2145 W, 2010-09 Ref Part No Description Remark QTY KIT 1 502 21 60-13 ACCESSORY BAG 1 2 501 60

2009 GULF COAST KARTERS CLASSES AND CLASS SPECIFICATIONS

2009 GULF COAST KARTERS CLASSES AND CLASS SPECIFICATIONS These specifications are derived from other national karting organization s rule books and intended to equalize participants in the same class.

pneumatic power clamps

pneumatic power clamps Features Király Trading KFT H-1151 Budapest Mogyoród útja 12-14 E-mail:_agi@kiralytrading.hu Your requirements Power element of machines, tools and devices for the following applications:

Rebuilding & Tuning the Olds 455/403

Rebuilding & Tuning the Olds 455/403 Improved Power, Torque and Reliability Joe Mondello Mondello Technical Center Mondello Performance Products Outline Introduction Advantages of Rebuilding Usual rebuilding

PFH. Application example. Pneumatic 2-Finger Parallel Grippers Long-stroke Grippers. Sizes Gripping force 510 N N

PFH Sizes 30.. 50 Weight 2.65 kg.. 9.7 kg Gripping force 510 N.. 2650 N Stroke per finger 30 mm.. 50 mm Workpiece weight 2.55 kg.. 11.5 kg Application example Assembly unit for intermediate sleeves in

SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS BC2145,

SPARE PARTS LIST BRUSHCUTTERS/CLEARING SAWS BC2145, 2010-09 ACCESSORIES BC2145, 2010-09 ACCESSORIES BC2145, 2010-09 Ref Part No Description Remark QTY KIT 1 502 21 60-13 ACCESSORY BAG 1 2 501 60 02-03

DICTATOR "DIREKT" Gate Closer

DICTATOR "DIREKT" Gate Closer For Access Gates in Boundary Fences The DICTATOR gate closer DIREKT is the economic solution for the reliable and controlled closing of outside gates, such as admission gates

DPZ-plus. Application example. Pneumatic 3-Finger Centric Grippers Sealed Grippers. Gripping force 520 N N. Sizes

DPZ-plus Sizes 64.. 200 Weight 0.62 kg.. 20.1 kg Gripping force 520 N.. 16800 N Stroke per finger 3 mm.. 25 mm Workpiece weight 2.6 kg.. 60.0 kg Application example Insertion tool for assembling small

Air Saving Valve. Pressure Valve Flow Valve

Air Saving Valve Series Series Pressure Valve Flow Valve % reduction in air consumption Cuts air consumption by operating the return stroke at a reduced pressure. valve Pressure Air consumption reduction

[Graphic Division] 10

How to Order RM0 0 Z. IN/OUT fitting type Metric size Inch size Straight Elbow Straight Elbow Straight Elbow Straight Elbow ø ø ø ø ø ø ø ø ø/ ø/ ø/ ø

Series RM/ End lock RME Port Plug End block End block type Mounting position L Left side R Right side L side end block 0. L VVQ0000 Single unit regulator / Port plug for regulator block ø0 0 Options Note

Safety Shut-Off Valve HON 720

Safety Shut-Off Valve HON 70 Product information serving the gas industry worldwide Application, Characteristics, Technical Data Application main safety device for gas pressure regulating stations suitable

Bellows actuator EB Key features

Bellows actuator B Bellows actuator B Key features Key features Suitable for use in harsh, dusty ambient conditions Can be used under water Sturdy design Large forces range from 1 50 KN Low installation

VACUUM REGULATORS CONTENTS

CAD drawing data catalog is available. ACCESSORIES GENERAL CATALOG AIR TREATMENT, AUXILIARY, VACUUM, AND FLUORORESIN PRODUCTS CONTENTS Small Regulators Features 759 Specifications, Order Codes, Flow Rate

SPARE PARTS LIST. CHAIN SAWS 450, from

SPARE PARTS LIST CHAIN SAWS 450, from 2011-09 - ACCESSORIES 450, from 2011-09 - ACCESSORIES 450, from 2011-09 - Ref Part No Description Remark QTY KIT 1 503 55 85-04 TOOL 1 CARBURETOR 450, from 2011-09

TECHNICAL REGULATION

RMMCGF ROTAX MAX MOJO CHALLENGE GRAND FINALS 2017 TECHNICAL REGULATION MICRO MAX / MINI MAX / JUNIOR MAX This english version is just a translation of the official Technical Regulations approved and published

Air preparation units

Overview Description Page Characteristics Dimensions Order instructions Type overview unit three-piece 44, 45, 48 52 6 unit two piece 44, 45, 48 52 6 Filter-regulator 44, 45, 48 53 6 Filter-water-separator

RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL

RARS5000 AIR BODY SAW OWNER S OPERATING MANUAL DESCRIPTION 1. No mar 2. No mar tip 3. Housing grip 4. Trigger 5. Air inlet 6. Air inlet plug 7. Plastic board Important! It is essential that you read the

WORLD CHAMPION. SMALL BORE RIFLE.22 l.r. MANUAL. Technical Innovations

SMALL BORE RIFLE.22 l.r. MANUAL Technical Innovations Technical Innovations -General information Page 2 -Bedding Page 3 -Three locking lugs Page 4 -Safety / dry fire switch Page 4 -Firing pin Page 4 -Firing

Position locking powerful chuck. CKL2-*-HC Series CKL2-40CS-HC CKL2-50CS-HC CKL2-63CS-HC CKL2-80CS-HC Compressed air to

RV* FH1 G G B FH Specifications Descriptions Cylinder bore size Working fluid Max. working pressure Min. working pressure Ambient temperature Port size Operational stroke length Rod diameter Capacity of

Air Saving Valve. Series ASQ. Series ASR. Pressure Valve. Flow valve TMH ASD AS AS-FG AS-FP AS-FM ASP ASN AQ ASV AK VCHC ASS. r r AS-FE KE 10 0.

Air Saving Valve Series R Pressure Valve Series Q Flow Valve P r.9.7 2..3.1 D -FE KE -FG -FP -FM.1.2.2.3 pressure (MPa) -D -T P ow valve Fl N AQ V e n by o i t p nsum n stroke o c r i r a Cuts g the retu

K13.12 FACE FIXED PANIC EXIT DEVICE K13 DOORS

K13 DOORS K13.12 FACE FIXED PANIC EXIT DEVICE 01.03.2018 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Base set n

FH500 Series. Open and close angle: 20 at open, -5 at closed. FH510-D FH512-D FH516-D FH520-D FH510-O FH512-O FH516-O FH520-O Actuation.

RV* FH G G FH G N/ S/F Specifications Double acting/single acting FH Series Open and close angle: at open, - at closed FH FH-D FH-D FH-D FH-D FH-O FH-O FH-O FH-O Actuation Double acting Single acting Working

SPOOL VALVES. pilot operated single/dual solenoid (mono/bistable function) ISO mm - pad mounting body M12 connection

SPOOL VALVES pilot operated single/dual solenoid (mono/bistable function) ISO 07-8 mm - pad mounting body M connection x/ - / - / Series 0 ISO 07- (8 mm) FEATURES M connection on top of valve: reduces

R133 HELYON. Brass high pressure regulator, suitable for compressed air, gas and liquid

R133 Brass high pressure regulator, suitable for compressed air, gas and liquid HELYON 5 Chemin du Jubin 6957 DARDILLY Tél. +33 () 7 5 16 7 - Fax +33 () 7 5 16 71 FEATURES High pressure regulator for cylinder

90AETO 04 (6H16) 1C6H1-664E1

ETO 04 (6H16) 1C6H1-664E1 ( ) FOREWORD This Parts Catalogue is related to the parts for the model(s) on the cover page. When you are ordering replacement parts, please refer to this Parts Catalogue and

GRIPPERS SERIES P3 - P12 ACTUATORS

GRIPPERS SERIES P3 - P12 1 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 GRIPPER WITH TWO PARALLEL JAWS, SERIES P3 Parallel double-acting two-jaw gripper, with either internal or external clamping. Aluminum

Gas Pressure Regulator HON 502

Gas Pressure Regulator HON 502 Product information serving the gas industry worldwide Gas Pressure regulator HON 502 Application, Characteristics, Technical Data Application for offtake stations in gas

November 2018 Alfa Romeo Montreal Parts

November 2018 Alfa Romeo Montreal Parts Table of Contents Alfa Romeo->Montreal->Body Panels Alfa Romeo->Montreal->Brakes Alfa Romeo->Montreal->Cables Alfa Romeo->Montreal->Doors Alfa Romeo->Montreal->Electrical

Heavy-duty three-point grippers HGDT

Key features At a glance The force generated by the linear motion is translated into the gripper jaw movement via a force-guided triple wedge mechanism. This also guarantees synchronous movement of the

SERIES A24 RAISED RIB

SERIES A24 RAISED RIB Eurobelt Series A24 Raised Rib conveyor belt has been designed mainly to be used with finger plates. It has ribs that, sticking out 6 mm above the module, provide a greater resistance

Modifications or Removal Allowed( stroke machines only)

DEVELOPMENT CLASS SUPPLEMENTARY REGULATIONS Development Class is open to any F4 Miniature Road Race bikes, 250cc 2 cylinder 4 stroke,including Hyosung cup machines and up to 150cc 2 and 4 stroke street

UCA2 Series. Bore size: 10, 16, 25, 32. UCA2 UCA2-L (with switch) Double acting Compressed air to 60 (no freezing)

SCP* CMK CM SC CKV C/OV CT MDC SMD JSK/M U STR SRL SM RCC Specifications Descriptions Bore size mm ctuation Working fluid Max. working pressure MPa Min. working pressure MPa Withstanding pressure MPa mbient

CLASS TLP Pressure Reducing Valve

CLASS TLP Pressure Reducing Valve CLASS TLP Direct Acting Pressure Reducing Valve The Class TLP balanced direct acting pressure regulator is designed for use on installations that have varying inlet pressures

CLASSIC ACTION MOTORCYCLE SPORT (SI) INC PO BOX HORNBY CHRISTCHURCH

CLASSIC ACTION MOTORCYCLE SPORT (SI) INC PO BOX 16335 HORNBY CHRISTCHURCH 8441 WWW.CAMS-RACING.ORG.NZ CAMS Supplemental Regulations General Entry is at the sole discretion of CAMS. In the interests of

COMPACT NITROGEN DIE SYSTEMS

COMPACT NITROGEN DIE SYSTEMS CONTENTSENTS 3 2 Compact Die Systems Fundamentals 3 Spring rates and scales 45 Standard cylinders Type CDS (3.3 100 kn) 6 Pad mounted cylinders Type CDSP (3.3 200 kn) 7 Low

SPG. Application example. Pneumatic 2-Finger Parallel Gripper Heavy-load Gripper. Weight 35 kg. Stroke per finger 100 mm.

SPG Size 100 Weight 35 kg 10,000 N Stroke per finger 100 mm Workpiece weight 50 kg Application example Gripper unit for heavy V8 engine blocks. SPG 100 2-Finger Heavy-load Gripper 446 www.schunk.com SPG

P5513. Users Manual. Pneumatic Comparison Test Pump. Test Equipment Depot Washington Street Melrose, MA TestEquipmentDepot.

Test Equipment Depot - 800.517.8431-99 Washington Street Melrose, MA 02176 TestEquipmentDepot.com P5513 Pneumatic Comparison Test Pump Users Manual PN 3963372 November 2010 2010 Fluke Corporation. All

FITTINGS AND VALVES Düker Plunger Valve RKV Type 7015 Professional control of flow rates, reservoir levels and pressures Safe, hygienic and durable!

FITTINGS AND VALVES Düker Plunger Valve RKV Type 7015 Professional control of flow rates, reservoir levels and pressures Safe, hygienic and durable! 1 The New Düker Plunger Valve Type 7015 St Plunger valves

IZH-53M AIR PISTOL. Certificate

IZH-53M AIR PISTOL Certificate 1 INTRODUCTION 1.1 Before using the pistol, familiarize yourself with this Certificate. The Certificate describes briefly the main technical data, design and operating instructions

Hydraulic hand spindle pump Models CPP1000-M, CPP1000-L

Calibration Hydraulic hand spindle pump Models CPP1000-M, CPP1000-L WIKA data sheet CT 91.05 for further approvals see page 2 Applications Calibration service companies and service industry Calibrations

GRAPHIC DIVISION. 3D drawings available at

GRAPHIC DIVISION GRAPHIC DIVISION PRODUCT DESCRIPTION PAG..01 TABLES FOR PNEUMATIC PUMPS SELECTION PAG..02 SMALL PNEUMATIC SUCTION PUMPS ART. PA 3 and PA 7 PAG..03 SMALL PNEUMATIC SUCTION PUMPS ART. PA,

GT22 Trimmer/Brushcutter UT Page 1 of 16 Accessories

GT22 Trimmer/Brushcutter UT-26039 Page 1 of 16 Accessories GT22 Trimmer/Brushcutter UT-26039 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 UP00578 1 TOOL KIT 2 DG07819 1 /P STRAP 3

Bombardier Inc. All rights reserved 1995 Bombardier Inc. Trademark of Bombardier Inc. Litho'd in Canada

Bombardier Inc. VOLUME 2 FLAT RATE TIME SCHEDULE 1996 Mach 1 Formula STX/LT2 Formula SLS Summit 500 Grand Touring 500/580/SE All rights reserved 1995 Bombardier Inc. Trademark of Bombardier Inc. Litho'd

2 in. 18 Gauge Brad Nailer. User manual

8504342 2 in. 18 Gauge Brad Nailer User manual Technical Data Capacity....100pcs Nail length... 15-50mm( 5/8-2 ) Fastener size....18gauge (1.25 1.00mm) Operation pressure 70-110PSI(4.8-7.5bar) Air inlet....1/4

Rule Changes from the Executive. Issue # published

Rule Changes from the Executive Issue #2018-5 published 7-9-18 Rule C9.3 TABLE OF PENALTIES K1.42.1 and K3.16.1 C9.3 TABLE OF PENALTIES K1.42 Push back nosecone noncompliance..1 and K3.16.1 Qualifying:

GT20 String Trimmer UT Page 1 of 16 Accessories

GT20 String Trimmer UT-26037 Page 1 of 16 Accessories GT20 String Trimmer UT-26037 Page 2 of 16 Accessories Ref # Part Number Qty S/P/F Description 1 PS01443 1 TOOL KIT 2 DG07819 1 /P STRAP 3 G07830 1

Inflatable Packer Single & Double. Single & Double Packer Dimension. Wireline Packer. Water Testing Packer (WTP) Packer

Inflatable Packer Single & Double Single & Double Packer Dimension Wireline Packer Water Testing Packer (WTP) Packer Packer Working Pressure & Depth Chart Packer Water Hand Pump Packer Air Driven Pump

Mini-Mac Applicator Specification Sheet Part No (Replaces )

Mini-Mac Applicator Specification Sheet Part No. 63801-2900 (Replaces 19814-1000) FEATURES ΠQuick set-up time; plus the crimp height, track and feed adjustments can be preset in applicator ΠConductor

User Guide for. UTR Turbo Air Lappers Pneumatic Air Grinders & Lappers UTR-30, UTR-70, UR , ,

User Guide for UTR Turbo Air Lappers Pneumatic Air Grinders & Lappers UTR-30, UTR-70, UR-120 8502250, 8502245, 8502251 We thank you for choosing our products. This guide provides information on general

seriesek Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/2 DESCRIPTION Spool valves series EK 2.43 MATERIALS TECHNICAL DATA SPARE PARTS

Spool valves pilot and solenoid actuated G 1/8 - G 1/4 - G 1/ DESCRIPTION Valves series "EK" are produced in the 3/, 5/ and pneumatic functions. The piloting solenoid valve can be assembled perpendicular

MPG-plus. Application example. Pneumatic 2-Finger Parallel Gripper Gripper for small components. Gripping force 38 N 175 N. Sizes

MPG-plus Sizes 25 40 Weight 0.06 kg 0.24 kg Gripping force 38 N 175 N Stroke per finger 3 mm 6 mm Workpiece weight 0.19 kg 0.7 kg Application example Pneumatically driven, dual-axis pick-and-place machine

K0709 Quick-fit couplings

Joints 1067 K0709 Quick-fit couplings with radial offset compensation external thread D1 SW SW1 application example: X max. D D 3 4 internal thread SW 3 4 2 SW1 D D Coupling part and claw in steel. Nut

CHAPTER 3 : AIR COMPRESSOR

CHAPTER 3 : AIR COMPRESSOR Robotic & Automation Department FACULTY OF MANUFACTURING ENGINEERING, UTeM Learning Objectives Identify types of compressors available Calculate air capacity rating of compressor

FLAT BAR ERGOPOWER 1 - TECHNICAL SPECIFICATIONS 2 - COMPATIBILITY WARNING! COMPATIBILITY

ERGOPOWER FLT R 1 - TECHNICL SPECIFICTIONS 2 - COMPTIILITY WRNING! COMPTIILITY These controls were conceived, sized and created solely for use on roads. They are therefore not suited to other purposes

Pressure and Flow Control Valves DBGM, German and European Patents

Pressure and Flow Control Valves DBGM, German and European Patents Absolutely Reliable Pressure and Flow Control In water mains of sizes DN 50 to DN 150, ERHARD Control Valves in straight or angle pattern

P R O D U C T G U I D E E N D U R O - M O T O C R O S S

PRODUCT GUIDE PRODUCT GUIDE Husqvarna s legacy represents a unique chapter in the story of motorcycles.with a history spanning over 100 years, our bikes have dominated all off-road categories, allowing

Differential pressure control and flow limiter AVPB/AVPB-F, PN 16

Data sheet Differential pressure control and flow limiter AVPB/AVPB-F, PN 16 Application AVPB is a self-acting differential pressure control and flow limiter primarily for use in district heating systems.

756 Safety Relief Valves

756 S a fe t y R e l i e f Va l ve s INTRODUCTION 756 Safety Relief Valves The effects of exceeding safe pressure levels in an unprotected pressure vessel or system, can have catastrophic effects on both

TECHNICAL DATA - CHASSIS 179

TECHNICAL DATA - CHASSIS 179 Frame Fork Shock absorber Suspension travel (Supermoto) Front Rear Suspension travel (Supermoto R, Supermoto T) Front Rear Brake system Front Rear Brake discs - diameter Front

COMPACT NITROGEN DIE SYSTEMS

COMPACT NITROGEN DIE SYSTEMS CONTENTSENTS 3 2 Compact Die Systems Fundamentals 3 Spring rates and scales 45 Standard cylinders Type CDS (3.3 100 kn) 6 Pad mounted cylinders Type CDSP (3.3 200 kn) 7 Low

Description Pressure range Connection thread Device Page

Pressure Regulator Pressure range onnection thread Device Page max. 22 l/min miniature -850 0 mbar 1 8 NPT V800.02 max. 22 l/min miniature -850 0 mbar 10-32 and flange V900.02 max. 0 l/min precise -1 +0,.4

TECHNICAL DATA OBSOLETE

April 9, 2009 Preaction 326a 1. DESCRIPTION Viking supervised Double-Interlocked Electric/Pneumatic Release Preaction Systems utilizing the Viking G-4000P Deluge Valve. The small profi le, lightweight,