Distributed By: Mariner Sails, Dallas TX. Mariner-Direct

Transcription

1 Distributed By: Mariner Sails, Dallas TX. Mariner-Direct

2 Table of Contents Electrical Accessories Viking 6 Round Battery Hatch Native Watercraft Power Pack Native Watercraft Nocqua Power Pak Native Watercraft Twin Battery Mounts Native Watercraft Propel 10 Battery Mount Dimmer Switch BerleyPro Orb Light BerleyPro Flag Native Watercraft Cable Clamps FishFinder Visors Lowrance Visors Simrad GO7 Visors Raymarine Dragonfly Visors Garmin Visors Humminbird Visors Hobie Transducers Mounts Lowrance TotalScan Raymarine Dragonfly Humminbird Helix 300 to 800 Series Garmin GT52 DownVu & Sidevu Humminbird ION Series & Onix Series Garmin GT51, GT41 and GT40 Lowrance - 3D StructureScan HDS Gen3 Series Humminbird Mega SI/GPS G2N Native Watercraft Propel Rudder Steering Upgrade Propel Service Tool Viking Tacklepod

3 BP1102 Viking 6 Round Hatch Battery Mount This battery mount is made to be attached to the underside of a 6 inch or larger hatch lid. This allows you to power your lights, cameras, and sounders with an easily removable package to keep the weight down while you are loading and unloading. By having the mount suspended off the bottom of the kayak you also keep your connections dry and reliable! This is designed to fit a 4.5 or 5ah battery. Made in Australia This kit includes: 1 x anodized aluminum bracket 1 x Velcro strap 1 x 3.5 6mm Cable Gland Stainless steel fasteners

4 BP6005 Native Watercraft Power Pack The Power Pack is the perfect add-on for installation of powered accessories in the Native Watercraft Kayak. This allows up to a 9ah battery to fit directly behind you in the existing round cavity with a recess for cabling and fuse holders to be located. Made from tough but lightweight ABS plastic with stainless steel fasteners makes, this is built to last. The lid provides two locations to mount Railblaza E-Ports or to customize as desired. This fits the following kayaks: Slayer 12 Slayer 14.5 Slayer Propel 10 Slayer Propel 13 Mariner 10 Mariner 12.5 ****Battery Not Included**** The installation requires some simple modification to the rear hatch and then cables can be run through the cable gland provided.

5 BP6006 Native Watercraft Nocqua Power Pack The Propel Power Pack is the perfect add on for installation of powered accessories in the Native Watercraft range. This allows your Nocqua 10ah water resistant Lithium Ion Battery to fit directly behind you in the existing round cavity with recesses for cabling and fuse holders. Made from tough but lightweight ABS plastic with stainless steel fasteners provided, this is built to last. The lid provides two locations to mount Railblaza E-Ports or customize this as you like. This fits the following kayaks: Slayer 12 Slayer 14.5 Slayer Propel 10 Slayer Propel 13 Mariner 10 Mariner 12.5 ****Battery Not Included**** The installation requires some simple modification to the rear hatch and then cables can be run through the cable gland provided.

6 BP6010 Native Watercraft Twin Battery Mount This battery mount has been designed to fit the Native Watercraft Slayer 13 Propel, Slayer 12, and Slayer 14.5 by removing the existing plastic cover and replacing it with the new BerleyPro Dual Battery Mount. This mount is built tough, with anodized aluminum, stainless steel fasteners, and a 6mm seal. It has two battery locations to fit most 7,8,or 9ah batteries. This battery mount can be used with either 1 or 2 batteries which allows you to run all of your electronics on that big trip away. The thru hull gland provided makes this an easy install for your fish finder or other electronics with no additional holes needing to be drilled. Two aluminum handles make for easy removal and transport This fits the following kayaks: Slayer 12 Slayer 14.5 Slayer Propel 13

7 BP1404 Dimmer Switch This dimmer switch has been specifically designed to be run with the BerleyPro light range and provide fine control over your lighting. Our modified toggle switch comes with 10cm of wiring is housed in a 3D printed box, sealed with epoxy, and finished with a waterproof boot.

8 BP1406 BerleyPro Orb The BerleyPro Orb is a 12v, 3 piece collapsible light perfect for that boat or kayak. With IP68 LEDs orientated at 360 degrees and angled overhead this can be used as either an anchor light or permanent running light on your watercraft. Our specific selections of LEDs are bright enough to let you land that tricky fish at night or setup your gear. No more forgetting to charge your battery or paying for expensive smaller batteries as this can be connected to your existing 12V system. This light is easy to install with only 2 wires needing to be connected and it comes with everything you need. Includes: Super bright and waterproof IP68 LEDs Extremely low current draw at 210mA RailBlaza mounting E Port Stainless steel fasteners Waterproof fuse holder 3A fuse 3m of twin core marine cable 3 Piece 1.1m tall collapsible light

9 BP1405 BerleyPro Flag BerleyPro Flag helps increase visibility as an addition to the BerleyPro Orb (Collapsible Light).

10 BP6012 Native Watercraft Cable Clamp The Groove Clamp is designed to bolt into the track on your kayak to run the sounder cables neatly alongside. Custom made using 3D printing technology and provided with stainless steel fasteners for durability in salt water. *Sold as a pair* *Fits Native Watercraft Tracks only

11 BP1701 Lowrance Elite 4 HDI/Hook/Chirp Sun Visor These visors were designed to keep the sun and water off the screen when your fish finder is placed in a open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made In Australia from black ABS Plastic. This is a 5-minute install using two stainless steel fasteners provided. Benefits: Reduced Glare Splash protection Increased battery life Screen protection This visor fits the following: Lowrance Elite 4 HDI Lowrance Hook 4 Lowrance Elite 4 CHIRP ***Check your fish finder make sure you have blue and red plugs on the back of the unit Note: This does not fit DSI or Lowrance Sounders with the two black plugs on the rear. *Fish finder not included

12 BP1702 Lowrance Elite 5 HDI/Hook/Chirp Sun Visor These visors were designed to keep the sun and water off the screen when your fish finder is placed in a open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. These visors are great additions for your kayak or your power boat. Made In Australia from black ABS Plastic. This is a 5-minute install using two stainless steel fasteners provided. Benefits: Reduced Glare Splash protection Increased battery life Screen protection Camera Mount This visor fits the following: Lowrance Elite 5 HDI Lowrance Elite Hook 5 Lowrance Elite 5 Chirp ***Fish finder not included.

13 BP1703 Lowrance Elite7 HDI/Hook/Chirp Sun Visor These visors were designed to keep the sun and water off the screen when your fish finder is placed in a open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made In Australia from black ABS Plastic. This is a 5-minute install using two stainless steel fasteners provided. Benefits: Reduced Glare Splash protection Increased battery life Screen protection Camera Mount This visor fits the following. Lowrance Elite 7 HDI Lowrance Hook 7 Lowrance Chirp 7 ***Fish Finder not included.

14 BP1704 Lowrance Elite 3 / 4 DSI Sun Visor These visors were designed to keep the sun and water off the screen when your fish finder is placed in a open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made In Australia from black anodized aluminum. This is a 5-minute install using two stainless steel fasteners provided. Benefits: Reduced Glare Splash protection Increased battery life Screen protection This visor fits the following: Lowrance Elite 3 Lowrance Elite 4 DSI Check your early model Elite 4 visor and if it has the black plugs on the back it will fit. ***Fish Finder not included.

15 BP1705 Lowrance 5 HDS Sun Visor These visors were designed to keep the sun and water off the screen when your fish finder is placed in a open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic This is a 5-minute install using the two stainless steel fasteners provided. Benefits: Reduced Glare Splash protection Increased battery life Screen protection This visor fits the following: Lowrance Elite 5 HDS ****Fish Finder not included.

16 BP1706 Lowrance Gen1 HDS 7 Sun visor These visors were designed to keep the sun and water off the screen when your fish finder is placed in an open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. This is a 5 minute install using the two stainless steel fasteners provided. Benefits: Reduced Glare Splash protection Increased battery life Screen protection Camera Mount This visor fits the following. Lowrance Gen 1 HDS 7 ***Fish Finder not included.

17 BP1707 Lowrance HDS Gen 2 /3 Sun visor These visors were designed to keep the sun and water off the screen when your fish finder is placed in an open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. This is a 5 minute install using the two stainless steel fasteners provided. Benefits Reduced Glare Splash protection Increased battery life This visor fits the following. Lowrance Gen 2/3 Sun Visor ***Fish Finder not included.

18 BP1708 Lowrance 7TI Sun Visor These visors were designed to keep the sun and water off the screen when your fish finder is placed in an open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. This is a 5 minute install using the two stainless steel fasteners provided. Benefits Reduced Glare Splash protection Increased battery life This visor fits the following: Lowrance Elite 7 TI ***Fish Finder not included.

19 BP1709 Lowrance HDS12 Sun Visor These visors were designed to keep the sun and water off the screen when your fish finder is placed in a open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. This is a 5 minute install using the two stainless steel fasteners provided. Benefits: Reduced Glare Splash protection Increased battery life Screen protection This visor fits the following. Lowrance HDS 12 ***Fish Finder not included.

20 BP1710 Lowrance HDS9 Visor These visors were designed to reduce the glare and the water off your fish finder screen. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. **This is a quick install using the four stainless steel fasteners provided through the flush mount locations on the fish finder. Refer to the installation image provided for more information. Benefits: Reduced Glare Splash protection Increased battery life This visor fits the following: Lowrance HDS9 ***Fish Finder not included.

21 BP1711 Lowrance 5 TI Sun Visor These visors were designed to keep the sun and water off the screen when your fish finder is placed in a open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Benefits: Reduced Glare Splash protection Increased battery life Screen protection Made in Australia This is a 5 minute install using the two stainless steel fasteners provided. This visor fits the following. Lowrance 7 TI Sun Visor ***Fish Finder not included.

22 BP1712 Lowrance 9 TI Sun Visor These visors were designed to keep the sun and water off the screen when your fish finder is placed in a open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. This is a 5 minute install using the two stainless steel fasteners provided. Benefits: Reduced Glare Splash protection Increased battery life Screen protection This visor fits the following. Lowrance 9 TI Sun Visor ***Fish Finder not included.

23 BP1713 Simrad Go7 Visor These visors were designed to reduce the glare and the water off your fish finder screen. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. This is a 5 minute install using the four stainless steel fasteners provided. Benefits: Reduced Glare Splash protection Increased battery life This visor fits the following: Simrad GO7 ***Fish Finder not included.

24 BP2101 Raymarine Dragonfly 7 Visor No more squinting at your screen! This visor keeps the sun off the screen and helps keep the water off! This sun visor is made to fit the Raymarine Dragonfly series fish finders and is the perfect solution on your kayak or boat. Made in Australia from 3mm ABS plastic. Made in Australia from black ABS Plastic. This is a 5 minute install using the four stainless steel fasteners provided. Benefits: Reduced Glare Splash protection Increased battery life Screen protection This visor fits the following. Dragonfly 7 Pro ***Fish Finder not included.

25 BP2102 Raymarine Dragonfly 4/5 Visor No more squinting at your screen! This visor keeps the sun off the screen and helps keep the water off! This sun visor is made to fit the Raymarine Dragonfly series fish finders and is the perfect solution on your kayak or boat. Made in Australia from 2mm ABS plastic. This is a quick install by undoing the existing ball mount and placing the visor in between. Made in Australia from black ABS Plastic. This is a 5 minute install using the four stainless steel fasteners provided. Benefits: Reduced Glare Splash protection Increased battery life Screen protection This visor fits the following. Dragonfly 4 DV Dragonfly 4 PRO Dragonfly 5 DVS Dragonfly 5 PRO ***Fish Finder not included.

26 BP2501 Garmin EchoMap 75sv Visor These visors were designed to reduce the glare and the water off your fish finder screen. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolong battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. This is a 5 minute install using the four stainless steel fasteners provided. Benefits Reduced Glare Splash protection Increased battery life Screen protection This visor fits the following. Garmin EchoMap 75sv Garmin EchoMap 73sv ***Fish Finder not included.

27 BP2502 Garmin Striker 4 Visor These visors were designed to keep the sun and water off the screen when your fish finder is placed in an open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. This is a quick install using the four stainless steel fasteners provided through the flush mount locations on the fish finder. Refer to the installation image provided for more information. Benefits: Reduced Glare Splash protection Increased battery life This visor fits the following: Garmin Striker 4 ***Fish Finder not included.

28 BP2503 Garmin Striker 7 Visor These visors were designed to reduce the glare and the water off your fish finder screen. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. This is a quick install using the four stainless steel fasteners provided through the flush mount locations on the fish finder. Refer to the installation image provided for more information. Benefits Reduced Glare Splash protection Increased battery life Screen protection This visor fits the following. Garmin Striker 7 ***Fish Finder not included.

29 BP2504 Garmin Striker 5 Visor These visors were designed to reduce the glare and the water off your fish finder screen. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. This is a quick install using the four stainless steel fasteners provided through the flush mount locations on the fish finder. Refer to the installation image provided for more information. Benefits Reduced Glare Splash protection Increased battery life Screen protection This visor fits the following. Garmin Striker5 ***Fish Finder not included.

30 BP2505 Garmin EchoMaps 95sv Visor These visors were designed to reduce the glare and the water off your fish finder screen. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. This is a quick install using the four stainless steel fasteners provided through the flush mount locations on the fish finder. Refer to the installation image provided for more information. Benefits Reduced Glare Splash protection Increased battery life This visor fits the following. Garmin EchoMaps 95sv ***Fish Finder not included.

31 BP2506 Garmin 7412/7612 These visors were designed to keep the sun and water off the screen when your fish finder is placed in an open environment. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. ***This is a quick install using the four stainless steel fasteners provided through the flush mount locations on the fish finder. Refer to the installation image provided for more information. Benefits: Reduced Glare Splash protection Increased battery life This visor fits the following: Garmin 7412/7612 ***Fish Finder not included.

32 BP2901 Humminbird Helix 5 Visor These visors were designed to reduce the glare and the water off your fish finder screen. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolongs battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. This is a quick install using the four stainless steel fasteners provided through the flush mount locations on the fish finder. Refer to the installation image provided for more information. Benefits Reduced Glare Splash protection Increased battery life This visor fits the following. Helix 5 ***Fish Finder not included.

33 BP2902 Humminbird Helix 7 Visor These visors were designed to reduce the glare and the water off your fish finder screen. By using a fish finder visor, it allows you to reduce your screen brightness and still see the screen clearly which prolong battery life. The added bonus of splash protection gives you more time fishing and less time cleaning. Made in Australia from black ABS Plastic. This is a quick install using the four stainless steel fasteners provided through the flush mount locations on the fish finder. Refer to the installation image provided for more information. Benefits Reduced Glare Splash protection Increased battery life This visor fits the following. Helix 7 ***Fish Finder not included.

34 BP2601 Lowrance Total Imaging Transducer Mount - Hobie The TotalScan ready transducer mount is designed to fit in the existing Lowrance Ready location on the base of Hobie Kayaks. The mount and cover for the TotalScan transducer provides protection also maintaining a crisp image with the structure scan. The ABS plastic is designed to protect the transducer from scratching and damage with normal kayak use. This however is still only a plastic mount placed at the base of the kayak so care must always be taken. This mount sits level with the base of the hull on a Pro Angler 14 but extends lower on other Hobie models. Made in Australia from black ABS Plastic and comes with stainless steel fasteners. Transducer Designed for use with: Lowrance Elite TI Lowrance HDS Gen3 Lowrance Carbon

35 BP2602 Raymarine Ready Transducer Mount - Hobie The Raymarine Ready transducer mounts are designed to fit in the existing Lowrance Ready location on the base of Hobie Kayaks. These clamp the Dragonfly transducer onto the mounting plate giving it no chance of falling sideways. The ABS plastic is designed to protect the transducer from scratching and damage with normal kayak use. This however is still only a plastic mount placed at the base of the kayak so care must always be taken. This mount sits level with the base of the hull on a Pro Angler 14 but extends lower on other Hobie models. Made in Australia from black ABS Plastic and comes with stainless steel fasteners. This mount fits the following fits the following Raymarine Transducers. Part number: R70373 (CPT-DV) Part number: R70374 (CPT-DVS)

36 BP2603 HumminBird Ready Transducer Mount - Hobie The HumminBird Ready transducer mounts are designed to fit in the existing Lowrance Ready location on the base of Hobie Kayaks. These clamp the Humminbird transducer onto the mounting plate giving it no chance of falling sideways. The ABS plastic is designed to protect the transducer from scratching and damage with normal kayak use. This however is still only a plastic mount placed at the base of the kayak so care must always be taken. This mount sits level with the base of the hull on a Pro Angler 14 but extends lower on other Hobie models. Made in Australia from black ABS Plastic and comes with stainless steel fasteners. This mount fits the following Humminbird transducers XNT 9 SI 180 T compact side imaging transducer XHS 9 HDSI 180 T HDSI transducer

37 BP2604 Garmin GT52 Side Vu Imaging Transducer Mount - Hobie The Garmin Side Vu ready transducer mount is designed to fit in the existing Lowrance Ready location on the bottom of Hobie Kayaks. The mount and cover for the Garmin Side Vu fits the GT52 transducer which provides protection and maintains a crisp image for structure scan. The ABS plastic is designed to protect the transducer from scratching and damage for normal kayak use. This however is still only a plastic mount placed at the base of the kayak so care must always be taken. This mount sits level with the base of the hull on a Pro Angler 14 but extends lower on other Hobie models. Made in Australia from black ABS Plastic and comes with stainless steel fasteners. This mount fits the following fits the following Garmin Transducers. GT52HW-TM Part Number:

38 BP2605 HumminBird HDI Ready Transducer Mount - Hobie The HumminBird Ready transducer mounts are designed to fit in the existing Lowrance Ready location on the bottom of Hobie Kayaks. These clamp the Humminbird transducer onto the mounting plate giving it no chance of falling sideways. The ABS plastic is designed to protect the transducer from scratching and damage with normal kayak use. This however is still only a plastic mount placed at the base of the kayak so care must always be taken. This mount sits level with the bottom of the hull on a Pro Angler 14 but extends lower on other Hobie models. Made in Australia from black ABS Plastic and comes with stainless steel fasteners. This mount fits the following Transducers Humminbird Transducer: XT HDSI T XT HDSI T XT HDSI T(RD) XT HDSI T(RD) Transducer Designed for use with: ONIX 8 SI ONIX 10 SI

39 BP2606 Garmin GT51 & GT41 Side-Vu Imaging Transducer Mount-Hobie The Garmin ready transducer mount is designed to fit in the existing Lowrance Ready location on the bottom of Hobie kayaks. This mount and cover is made for the large SideVu transducers which comes with the Garmin SideVu and DownVu Fish Finders providing protection for the transducer and maintaining a crisp image with the SideVu and DownVu. The ABS plastic is designed to protect the transducer from scratching and damage with normal kayak use. This however is still only a plastic mount placed at the base of the kayak so care must always be taken. This mount sits level with the bottom of the hull on a Pro Angler 14 but extends lower on other Hobie models. Made in Australia from black ABS Plastic and comes with stainless steel fasteners. This mount fits the following Humminbird Transducers: Garmin GT40-TM Part Number: Garmin GT41-TM Part Number: Garmin GT51M-TM Part Number: Garmin GT50M-TM Part Number:

40 BP2607 Lowrance 3D Structure Ready Mount Hobie The 3D Structure ready transducer mount is designed to fit in the existing Lowrance Ready location on the bottom of Hobie Kayaks. The mount and cover for the 3D Structure Scan transducer which comes with the HDS Gen 3 Series provides protection and maintains a crisp image with the 3D Structure Scan. The ABS plastic is designed to protect the transducer from scratching and damage with normal kayak use. This however is still only a plastic mount placed at the bottom of the kayak so care must always be taken. This mount sits level with the base of the hull on a Pro Angler 14 but extends lower on other Hobie models. Made in Australia from black ABS Plastic and comes with stainless steel fasteners. Transducer Designed for use with: Lowrance HDS Gen 3 Series Fish Finders

41 BP2608 Humminbird MGSI Ready Mount For Hobie Kayaks The MGSI Side Imaging ready transducer mount is designed to fit in the existing Lowrance Ready location on the bottom of Hobie Kayaks. The mount and cover for the MGSI Side Imaging transducer which comes with the HELIX 12, 10 and 9 CHIRP MEGA SI GPS G2N models provides protection and also maintaining a crisp image. This mount sits level with the base of the hull on a Pro Angler but extends lower on other Hobie models Made in Australia from black ABS Plastic and comes with stainless steel fasteners. Transducer Designed for use with: HELIX 12, 10 and 9 CHIRP MEGA SI GPS G2N models.

42 BP6019 Native Watercraft Propel Rudder Reinvent your Native Watercraft with this rudder upgrade. The rudder works by having a spring loaded center section that extends below the hull, giving it more surface area acting on the water. This gives you the ability to have finally let go of the steering while peddling with much improved tracking to keep your hands free! The rudder dramatically increases the response in turning and removes the laziness of the kayak while turning. Worried about what happens when you hit something going forwards? Don t worry The rudder is designed to fold back into itself if you hit something going forwards! It will just retract to the same size as the original rudder and you can put the locking pin provided in for easy transport, landing and launching. We make the rudders in Melbourne Australia out of thermoformed ABS plastic, and a CNC machined aluminum shaft. The rudder can be installed quickly with a screw driver and it comes with a locking pin so it can be collapsed when travelling.

43 BP6022 Native Watercraft Steering Upgrade Turn your Native watercraft into a new kayak with this steering upgrade. This conversion can be done in 30 minutes and removes the steering stops allowing the rudder to really bite into the water. We have designed a new drum, rear disc, and new steering cord for added performance and incredible turning capacity. This cord is now high-speed spectra with an average breaking strength of 290kg (640lb) and is connected by a looped crimp and tied at the rear. The new rear disc gives you the ability to tension the rudder removing the last piece of play from the handle and giving you a truly direct steering feel. The increased angle of the rudder allows you to turn on a dime with the added bonus of keeping your rudder safe during loading and unloading. This fits the following kayaks. Slayer Propel 10 Slayer Propel 13 Ultimate FX Propel Titan

44 BP6011 Native Propel Service Tool This kit provides the tools required to remove the pedals and upper, and lower housings of your propel drive. This contains a custom 8mm steel spanner with tool steel ends, TIG welded to give you the strength required in dissembling the components for service. The spanner has been Electrolysis - coated to resist corrosion. The tool contains a peddle puller to allow you to remove the pedals to get to the upper housings. *NOTE This service kit only fits the newer style Propel drives with the curved upper housings as shown in photos*

45 BP1106 Viking Tacklepod Stand The Tackle Pod stand is designed to help keep your pod upright while traveling or storing your pod at home. Simply slide the stand under the front of the Tackle Pod and it provides the extra support needed to stop it from rolling side to side. Made in Australia from ABS plastic.